Re: nautilus fora de gnome no mostra particions
A mi m'agrada utilitzar rox, tot i que fins que no em vaig acostumar utilitzava xfe que es molt semblant al innombrable de M$ Pero rox em permet tenir icones al escriptori Ja fa temps que vaig decantar-me per l'us de fluxbox com a WM, configurant-lo per a que es vegi igual a totes les mà quines que tinc. Degut a un accident vaig haver de reinstalar tot el sistema en el meu portà til. El cas és que una caracterÃstica que m'anava força bé en algunes situacions, era engegar nautilus (amb el parà metre --no-desktop) per a administrar particions i llà pissos USB (muntar, desmuntar). Però m'he trobat que en la nova instalació, Nautilus ja no els mostra a no ser que entri a gnome. A la que surto de gnome i torno a fluxbox, tornen a desaparèixer. En canvi, en l'ordinador d'escriptori, on tot segueix igual, si que funciona la caracterÃstica (com sempre ha fet, i com feia abans també al portà til) inclús des de fluxbox. Porto dos dies cercant solucions, però cap m'ha funcionat. Teniu alguna idea de com fer-ho per poder veure les particions muntades/USB a Nautilus un altre cop? o alguna eina semblant per fluxbox? rpb -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: nautilus fora de gnome no mostra particions
De fet rox és el gestor d'arxius que faig servir, encara que no com a gestor de l'escriptori, per posar un parell de icones (no m'agrada omplir l'escriptori de dibuixets) faig servir idesk. El cas és que m'havia acostumat a la facilitat de nautilus per muntar i desmuntar. És estrany perque això només em passa amb noves instal·lacions, no amb l'escriptori, on tinc també lenny actualitzada a diari. Al portàtil puc solucionar-ho anant fins a mnt/, doncs es tracta de particions compartides amb nfs que sempre són al mateix lloc, però em passa el mateix amb un asus eeepc amb lenny, aqui és més fotut perquè no munto la targeta SD des de fstab perque li posa el nom que li dóna la gana (/dev/blablabla) en funció del que tingui endollat (llàpissos USB, etc). Suposo que ho puc fer amb un script, a base de sed i cut, però no sóc cap geni en bash. El cas és que si en una màquina nautilus ho mostra i en una altra amb un sistema idèntic no (i ho feia abans de l'accident de marres), és que es tracta d'una característica que dec poder habilitar, però no trobo com... rpb
vlc amb so però sense imatge
En alguna de les darreres actualitzacions de lenny, m'he quedat sense poder veure la imatge dels videos a vlc, tot i poder sentir el so. Res del que he provat m'ha funcionat... a algú més li passa? Sempre tindré mplayer, però m'agradava la lleugeresa de vlc... rpb
Re: You've Been Removed!
c'est peut être bon là cette histoire non ?
Re: connexion wifi
mouss wrote: [snip] elle est en mode routeur la freebox? si oui, elle a le dhcp activé? si oui, tu devrais automatiquement récupérer une IP privée (l'ip privée de la freebox est 192.168.1.254 si tu ne la changes pas). comme on me l'a gentiment rappelé, c'est 192.168.0.254. Merci au correcteur! ça donne quoi si tu fais # ifdown eth1 # ifup eth1 -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [OpenVZ] Augmenter la taille de ma mémoire vive?
Merci Yoan, Effectivement le wiki m'a été très util ainsi que ton fichier de conf sample. J'ai pu modifier la taille de ma mémoire RAM ;-) Bon début de semaine à tous! Malick Le 25 juin 2008 13:09, yoann [EMAIL PROTECTED] a écrit : Bonjour, El Hadji Malick Gueye a écrit : Bonjour à tous, J'utilise OpenVZ pour la virtualisation après installation d'une machine la taille de la mémoire de la machine virtuelle est de 256Mo par défaut. Comment l'augmenter! En fait cette machine virtuelle sera un serveur d'application Tomcat mais avec ces 256Mo de mémoire la création de la machine virtuelle de Java ne peut même pas se faire. Merci d'avance! je te conseille fortement (voir même c'est indispensable) de regarder du coté du wiki d'openvz pour comprendre comment est géré la mémoire : http://wiki.openvz.org/Privvmpages#kmemsize ensuite vzctl --help ou bien man vzctl te donne pas mal d'info sur comment changer les paramètres à chaud. exemple pour la mémoire : vzctl set veid [--save] --vmguarpages P[:P] petit fichier de conf sample que je me suis fait si ça peut aider : http://file.mistur.org/vz-sample.conf Yoann -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- El Hadji Malick GUEYE Administrateur Système Tel: +221 775 48 18 48 Site web: http://malick.gueye.net Dakar/Senegal Ils m'ont demandé d'installer Windows ou mieux, ... alors j'ai installé Linux :-)
périph externe accessible à tous
Bonjour la liste ! Sur une machine etch/lenny, j'ai remarqué que quand je branche un périphérique externe (un clé usb, un carte SD, etc..) en tant qu'utilisateur simple, ce périphérique est accessible à tous les autres utilisateurs.. Je peux me déconnecter en laissant le périph branché et un autre utilisateur qui se connecte voit celui-ci sur son bureau KDE. ça me paraît assez bizarre ? Qu'en pensez-vous ? Bonne semaine, Steve -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: connexion wifi
Am Sonntag, 29. Juni 2008 23:55 schrieb mouss: Klaus Becker wrote: Salut, je viens d'installer une nouvelle freebox HD et j'essaie de faire marcher le wifi sur un portable sous Etch. Je ne connais pas grand'chose au wifi. Pour infos : (j'ai remplacé les infos sensibles par ...) /etc/network/interfaces : # Free Wifi DHCP auto eth1 iface eth1 inet dhcp wireless-mode managed wireless-essid freebox wireless-key ... # iwconfig eth1 IEEE 802.11g ESSID:freebox Mode:Managed Frequency:2.412 GHz Access Point: 46:70:E7:1F:F3:B4 Bit Rate:54 Mb/s Tx-Power:15 dBm Retry limit:15 RTS thr:off Fragment thr:off Encryption key:20BB-98F3-61 Security mode:open Power Management:off Link Quality=97/100 Signal level=-30 dBm Noise level=-31 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:115 Missed beacon:0 kwifimanager trouve ma connexion que j'ai appelée freebox, mais il m'avertit : IP locale : unavailable protection choisi sur le site de Free : WEP (pour commencer de la manière la + simple) après, faudra pas oublier de passer en wpa et de faire joujou avec wpasupplicant... #ifconfig -a eth1 Lien encap:Ethernet HWaddr adr inet6: . Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:30 errors:17 dropped:139 overruns:0 frame:0 TX packets:11 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:9522 (9.2 KiB) TX bytes:9191 (8.9 KiB) Interruption:177 Adresse de base:0x2000 Mémoire:fe8ff000-fe8f Le problème semble être l'absence d'IP locale. Voir le message de kwifimanager et son absence dans la sortie de ifconfig -a. Est-ce que je dois l'indiquer dans /etc/network/interfaces et de quelle manière? Il s'agit bien de l'adresse IP de ma freebox, indiquée sur le site de Free? elle est en mode routeur la freebox? si oui, elle a le dhcp activé? si oui, tu devrais automatiquement récupérer une IP privée (l'ip privée de la freebox est 192.168.0.254 si tu ne la changes pas). Oui, mode routeur et dhcp sont activés et je n'ai pas changé l'adresse IP privée de ma freebox. ça donne quoi si tu fais # ifdown eth1 # ifup eth1 # ifdown eth1 There is already a pid file /var/run/dhclient.eth1.pid with pid 2581 killed old client process, removed PID file Listening on LPF/eth1/00:1f:3c:6f:ec:67 Sending on LPF/eth1/00:1f:3c:6f:ec:67 Sending on Socket/fallback # ifup eth1 . Listening on LPF/eth1/00:1f:3c:6f:ec:67 Sending on LPF/eth1/00:1f:3c:6f:ec:67 Sending on Socket/fallback DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 3 . DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9 No DHCPOFFERS received. No working leases in persistent database - sleeping. Pourtant un voyant du portable indique bien une connexion wifi. bye Klaus -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Whois et suinot.org
Bonjour, Le dimanche 29 juin 2008 21:45, Remi Suinot a écrit : bonsoir; Chez moi: $ dig suinot.org [...] ;; Query time: 12 msec ;; SERVER: 192.168.3.1#53(192.168.3.1) ;; WHEN: Sun Jun 29 20:44:27 2008 ;; MSG SIZE rcvd: 77 Le temps de réponse très court me laisse penser que la requête est traitée localement (sur ton lan). Lorsque j'interroge mon DNS Orange (80.10.246.1) à propos de domaines connus tels que free ou orange, j'ai des temps de réponse d'environ 60ms. Il faudrait voir avec dig @ip_dns_free ton_domaine pour ne pas interroger ton propre dns. Le temps devrait être supérieur, mais ça devrait marcher sauf si personne n'a fait de requête dessus depuis plus de 24H, auquel cas l'info ne serait pas dans le cache. Sinon tu peux peut-être essayer depuis un dns orange qui n'aurait (peut-être) pas été utilisé pour cela dernièrement, par exemple 80.10.246.130 ou 81.253.149.10. Je ne sais pas si on peut utiliser leur dns en n'étant pas chez eux. En dernier recours, un dns de premier niveau? Après de nouveaux essais hier soir; la première requête (sur le dns orange) n'aboutit pas. Une deuxième requête dans la foulée aboutit avec un temps de 94ms, ce qui me fait dire que le dns orange à bien récupéré l'info lors de la première demande, mais avec un délai suffisamment long pour que de mon côté je sois passé en time out entre temps. Par contre, bien qu'ayant une connexion adsl, je ne suis pas en dégroupé total :( je pense que les problèmes d'erreurs d'acces viennent en grande partie, de là, non? Je ne pense pas, mais je n'ai aucune argumentation sérieuse à l'appui. Il faudrait que vous puissiez tester depuis une machine extérieure à votre lan, par exemple avec http://rootshell.be qui fournit gratuitement un compte shell limité. Je m'en sers pour tester mon parefeu et quelquefois pour anonymiser le surf. je fais effectivement, les tests en grande partie de chez moi (je modifie à l'occasion, /etc/resolv.conf pour tester le dns). Sinon, je passe par la machine de mon frère via ssh. Je suis à Limoges, lui, vers Bourges. Mais nous sommes tous les deux chez free.fr. Donc sur le même 'réseau local'. Essai effectué, un tunnel ssh vers une autre machine pour le navigateur ne change rien aux requêtes DNS. Il faudrait que se soit la machine distante qui fasse les requêtes sur ses dns (à condition bien sûr que la machine distante n'utilise pas les mêmes que nous). Donc l'utilisation de resolv.conf me paraît effectivement être la bonne méthode, avec des dns différents. J'ai aussi testé sur des machines sous XP, à partir de mon boulot. Je n'ai pas eu de problème particulier. L'acces est certe lent, mais jamais cela n'ai jamais eu de refus de connexion (et tout le réseau de l'hôpital est LENT !!!) Cette lenteur généralisée oblige peut-être à augmenter le temps de time out des connexions, permettant ainsi que ça fonctionne, comme évoqué plus haut. Bref, cela ne fait pas beaucoup avancer le débat... Peux tu faire un ping sur ma machine, stp? cela permettra de voir la vitesse moyenne (je n'ai pas d'ids sur mon serveur, pas de soucis) Rien ne passe, ni hier ni aujourd'hui. ping www.suinot.org PING www.suinot.org (81.56.179.119) 56(84) bytes of data. --- www.suinot.org ping statistics --- 9 packets transmitted, 0 received, 100% packet loss, time 8009ms Un parefeu? (j'étais 81.250.36.103 pour ce test) Je reste convaincu que le problème se situe dans le temps de réponse aux requêtes dns sur ton domaine. Le serveur ne serait-il pas trop lent (vieux, chargé)? Sinon, whois dit: Name Server:NS6.GANDI.NET Name Server:MASTER.SUINOT.ORG Un problème de config à ce niveau? Lequel est le primaire? As tu des traces d'activité (requêtes DNS) sur ton serveur? par curiosité, tu es sur quelle ville? village ;) Saint Sernin sur Rance, entre Albi (81 Tarn) et Millau (12 Aveyron) Je dépends des installations orange de Toulouse. Cordialement, -- Serge -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Whois et suinot.org
Désolé pour le bruit, erreur de destinataire :/ -- Serge -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Linux 2.6.22 image on AMD K7 pas de 6.24 pour K7 ?
Bonjour la liste Debian, Actuellement j'utilise un noyau 2.6.22-3-k7 (pour AMD ATHLON) Je voulais upgrader en 2.6.24-k7 vois le dernier 2.6.26-k7 Mais je ne trouve rien avec synaptic mon sources-list est le suivant: #deb http://ftp2.fr.debian.org/debian/ lenny main #deb-src http://ftp2.fr.debian.org/debian/ lenny main #deb http://security.debian.org/ lenny/updates main #deb-src http://security.debian.org/ lenny/updates main Le k7 est-il encore supporté? quel noyau installé pour AMD ATHLON dit K7 ? Merci pour vos réponses yoda -- Ce qui est possible avec le papier et d'autres supports traditionnels doit continuer à l'être avec le numérique. Debian Lenny user 2.6.22-2-k7/Xorg 7.0.2 KDE 3.5.7 http://www.debian.org # http://fr.wikipedia.org/wiki/Debian http://www.odebi.org/new/theme # http://gnutux.free.fr Il faut dire GNU/Linux :) # Membre du CULTe www.culte.org --- -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Linux 2.6.22 image on AMD K7 pas de 6.24 pour K7 ?
2008-06-30T17:24:45+0200, yoda_testeur [EMAIL PROTECTED]: Le k7 est-il encore supporté? quel noyau installé pour AMD ATHLON dit K7 ? Oui mais avec le noyau -686. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pb firewire kernel 2.6.25
Le samedi 28 juin 2008, Philippe MONROUX a écrit : Bonjour, Yop J'ai voulu essayer d'utiliser kino sous lenny. Mais j'ai lu que dans les noyaux récents la pile firewire était réorganisée. Plus de raw1394 donc. Quand je branche ma caméra j'ai un /dev/fw1 qui se crée. Mais bon je n'arrive pas à l'utiliser sous kino pour récupérer mes vidéos en dv. Comment faire sous lenny pour récupérer les vidéos d'un camescope ? Un p'tit up : idem Merci J'ai aussi lu quelque-part que ça pouvait fonctionner avec les sources sur le svn de dvgrab, mais j'ai finalement trouvé la version plutôt CVS... Bon... http://sourceforge.net/cvs/?group_id=14103 soit le module dvgrab de kino... Mais j'ai un soucis de compilation : 'malloc' not defined in this scope Je suppose que c'est une dépendance de compilation (-dev) non prise en charge par le script configure, j'ai alors tenté d'installer les libmm-dev, et libdmalloc-dev, mais sans résultat... J'en suis là... :P M'en vais essayer le module kino lui-même... Si ça peut orienter !?... -- philippe Damien -- Qui possède ton temps possède ton esprit. Approprie-toi ton temps et tu connaîtras ton esprit. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pb firewire kernel 2.6.25
’soir, s4mdf0o1, lundi 30 juin 2008, 18:14:56 CEST […] J'ai aussi lu quelque-part que ça pouvait fonctionner avec les sources sur le svn de dvgrab, mais j'ai finalement trouvé la version plutôt CVS... Bon... http://sourceforge.net/cvs/?group_id=14103 soit le module dvgrab de kino... Mais j'ai un soucis de compilation : 'malloc' not defined in this scope Je suppose que c'est une dépendance de compilation (-dev) non prise en charge par le script configure, j'ai alors tenté d'installer les libmm-dev, et libdmalloc-dev, mais sans résultat... J'en suis là... :P Mauvaise supposition, malloc est une fonction de base du C, elle définie dans les standards, elle se trouve dans la libc. libmm et libdmalloc (ne) fournissent (que) des remplaçants (ajout de fonctionnalités…). Donne-nous plus de contexte autour du message. -- Sylvain Sauvage -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Pb cross-compilation sous Debian
Bonjour, Merci pour votre réponse mais cela ne m' aide pas vraiment. J'ai trouvé la variable with_shared_libgcc dans le fichier debian/rules.defs que j'ai fixée à no, mais cela ne marche toujours pas. Apparemment le problème survient pendant la création de la cible libstdc++-v3. Avec les sources de GCC à la Debian, y a-t-il un moyen de compiler tout sauf cette cible, puis la produire séparément afin de mieux localiser le problème (car c'est vraiment long de tout compiler) ? Avec dpkg-buildpackage, la compilation s'arrête et aucun paquet n' est créé. Willy. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: périph externe accessible à tous
steve, lundi 30 juin 2008, 10:52:19 CEST Bonjour la liste ! ’soir, Sur une machine etch/lenny, j'ai remarqué que quand je branche un périphérique externe (un clé usb, un carte SD, etc..) en tant qu'utilisateur simple, ce périphérique est accessible à tous les autres utilisateurs.. Je peux me déconnecter en laissant le périph branché et un autre utilisateur qui se connecte voit celui-ci sur son bureau KDE. ça me paraît assez bizarre ? Qu'en pensez-vous ? Normal, le périphérique est branché sur la machine. Le système étant multi-utilisateur, à part la gestion du groupe floppy, il n’a aucun moyen de savoir quel utilisateur peut ou ne peut pas voir le périphérique. Donc le périphérique est visible par tous ceux qui sont dans le groupe floppy. Donc il apparaît sur tous les bureaux. Si le périphérique est monté, alors, encore une fois, c’est la gestion des droits qui entre en jeu. Par défaut, pour une clef vfat, le montage a l’air de se faire en rwxr-xr-x, pour utilisateur:root. Donc tout le monde peut lire les fichiers. Si cela te gêne, ça doit pouvoir se changer dans un .fdi de hal. Il y a aussi quelques options disponibles dans les propriétés de l’icône sous KDE. Les permissions ne sont accessibles que lorsque le périphérique est monté. Mais là, il y a un problème de droits d’accès… -- Sylvain Sauvage -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
mozilla-plugin-vlc
Après avoir réussi à refaire marcher vlc pour les divx (vlc --reset-plugin-cache), j'aimerais que son plugin pour mozilla fonctionne aussi... Quand j'ouvre un site qui l'utilise, je me retrouve avec un cadre noir où il est écrit (no video)... J'ai bien essayé iceweasel --reset-plugin -on sait jamais- , ça a reseté mais le problème reste entier... Je précise que je ne souhaite pas utiliser d'autre lecteur (xine, mplayer,...) Quelqu'un a-t-il eu ce problème, une solution? Salutations, Jean-Christophe -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
pedant recitative
Saluton, *** Warning! This letter contains a virus which has been successfully detected and cured. *** It. I therefore, ask thee, o king, with what feelings exterior of the splendid mansion had challenged and knowing the nature of virtue, he worshipped shape of a wild boar fond of sporting in water. Lips have babbled it. Let them babble it nowif not run very fast, for the axletree, deprived chase away the recollection of that awful sight. Me to be invincible is a fortunate circumstance,.
Re: Problema con la creación de un paquete...
El sáb, 07-06-2008 a las 21:07 +, Omar Murray escribió: Hola lista: Estoy intentando hacer un paquete .deb con las fuentes del blender, siguiendo como referencia un tutorial que encontré aquí como guía: http://www.juanjoconti.com.ar/files/paquetes-debian.html El problema es que al final de la compilación se genera este mensaje de error, y se detiene el proceso: ** #docbook-to-man debian/blender.sgml blender.1 touch build-stamp dh_testdir dh_testroot dh_clean -k dh_installdirs # Add here commands to install the package into debian/blender. /usr/bin/make DESTDIR=/home/crux/debian/blender-2.46/debian/blender install make[1]: se ingresa al directorio `/home/crux/debian/blender-2.46' make[1]: *** No hay ninguna regla para construir el objetivo `install'. Alto. make[1]: se sale del directorio `/home/crux/debian/blender-2.46' make: *** [install] Error 2 *** Hasta ahora estoy buscando en los manuales del gnumake y algunas guías de debian pero no encuentro que es lo que me falta. Si alguno me puede echar una mano le estaré muy agradecido. Saludos -- oM Omar G. Murray [Crux_] [EMAIL PROTECTED] JID: [EMAIL PROTECTED] Ekiga: [EMAIL PROTECTED] http://mysteriouswaystg.blogspot.com * Powered by Debian Lenny GNU-Linux - kernel 2.6.24.1 Powereb by Ubuntu Gutsy Gibbon 7.10 GNU-Linux - kernel 2.6.22-14 __ Enviado desde Correo Yahoo! La bandeja de entrada más inteligente. Hola, Has probado a compilar las fuentes antes de intentar hacer el paquete? Si tienes dependencias, no vas a poder empaqueta. Un saludo. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
arranque GRUB
buenos días, quiero seleccionar en el arranque de mi máquina que initlevel quiero usar, ¿Como se lo puedo indicar al GRUB?. quiero que por defecto arranque en el nivel 2, pero cuando yo quiera arrancar la máquina en otro nivel indicarlo al arrancar. Saludos. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: arranque GRUB
El lun, 30-06-2008 a las 13:01 +0200, burum escribió: buenos días, quiero seleccionar en el arranque de mi máquina que initlevel quiero usar, ¿Como se lo puedo indicar al GRUB?. quiero que por defecto arranque en el nivel 2, pero cuando yo quiera arrancar la máquina en otro nivel indicarlo al arrancar. Saludos. Hola En el archivo /boot/grub/menu.lst hay un parámetro como este: default 0 Esto indica cual de las entradas usara grub para arrancar. hay que añadir el numero de la entrada que quieras arrancar teniendo en cuanta que la primera entrada sera la 0, la segunda la 1 ... Un saludo. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: arranque GRUB
burum escribió: buenos días, quiero seleccionar en el arranque de mi máquina que initlevel quiero usar, ¿Como se lo puedo indicar al GRUB?. quiero que por defecto arranque en el nivel 2, pero cuando yo quiera arrancar la máquina en otro nivel indicarlo al arrancar. Saludos. Para indicar el arranque por defecto no tienes que hacerlo en el grub, sería en el /etc/inittab, una línea parecida( o igual): id:2:initdefault: Por otro lado, cuando necesites arrancar en en un nivel particular , editas la linea del grub en tiempo real y le pones el nivel en el que necesitas que arranque. Para editarlo te pones encima y pulsas e y luego editas, al final de todo pones el nivel. Saludos. --To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: kileando conexiones
On Sun, Jun 29, 2008 at 3:21 PM, nx [EMAIL PROTECTED] wrote: Hola que tal. Los que os dediqueis a la administración de sistemas conocereis de buena mano el programa de systernals TCPview, una maravilla que te permite ver todas las conexiones que tu equipo realiza con otros equipos al exterior, el estado de las conexiones ... y lo que es mejor aun .. permite terminar con una conexión, osea, matarla. He probado muy buenos programas que te dan esta información en linux, uno de ellos es el archiconocido netstat, por no hablar de iftop y nethogs que aunque no muestran el estado de las conexiones si es algo aproximado a lo que busco que no es ni mas ni menos el poder matar conexiones por consola tipo tcp view. Algo como htop, pero para las conexiones :) ... conoceis algun programa de este tipo?¿? Un saludo y gracias. iptraf? Saludos -- - Adrián Boubeta [EMAIL PROTECTED] C.T.I. TEGNIX, S.L. www.tegnix.com -
Autentificar usuarios en Samba para carpetas diferentes
Hola Listeros... Como Podría en samba en un servidor samba habilitar cuentas de usuarios para carpetas diferentes, Para que cada usuario acceda solo la carpeta correspondiente. Carezco de Internet y de manuales podrían ser específicos con sus respuestas... Gracias de antemano. ___ Servicio de E-MAIL Dirección Municipal de Educación Río Cauto - Granma - Cuba -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Generar Estadísticas de DansGuardian
[EMAIL PROTECTED] wrote: Holas: Alguno de ustedes tiene un manual de instalación de squid + dansguardian? Gracias, Paul 2008/6/23 Carlos Eduardo Velásquez Chaves [EMAIL PROTECTED]: Francisco Santos escribió: Que tal amigo... Yo lo he logrado con webmin pero tengo entendido que desde consola tambien se puede.. Al parecer es algo asi pero no estoy seguro sarg -l /var/log/squid/access.log Para mas informacion Man sarg Gracias Francisco, En el webmin como lo manejas? Tuviste que instalar un módulo para las estadísticas del DansGuardian? Saludos... Paul, aquí tienes algo de info: http://www.linux-os.com.ar/linuxos/servidor-socks-proxy-squid-25/ Cualquier cosa consulta, aquí estamos! Salu2. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: arranque GRUB
El día 30 de junio de 2008 6:04, Emilio [EMAIL PROTECTED] escribió: El lun, 30-06-2008 a las 13:01 +0200, burum escribió: buenos días, quiero seleccionar en el arranque de mi máquina que initlevel quiero usar, ¿Como se lo puedo indicar al GRUB?. quiero que por defecto arranque en el nivel 2, pero cuando yo quiera arrancar la máquina en otro nivel indicarlo al arrancar. Saludos. Hola En el archivo /boot/grub/menu.lst hay un parámetro como este: default 0 Esto indica cual de las entradas usara grub para arrancar. hay que añadir el numero de la entrada que quieras arrancar teniendo en cuanta que la primera entrada sera la 0, la segunda la 1 ... Un saludo. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Revisa en este enlace: http://www.xinug.org/drupal/upstart-runlevel-boot-time Es para Ubuntu, pero en Sid esta disponible upstart; ve si te sirve. Saludos. Marcos Delgado. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: arranque GRUB
El lun, 30-06-2008 a las 13:01 +0200, burum escribió: buenos días, quiero seleccionar en el arranque de mi máquina que initlevel quiero usar, ¿Como se lo puedo indicar al GRUB?. quiero que por defecto arranque en el nivel 2, pero cuando yo quiera arrancar la máquina en otro nivel indicarlo al arrancar. Saludos. Hola, Esta mañana debí leer mal la pregunta con mi consecuente contestación :) Con eso de que gano España la Eurocopa, estaba un poco empanado. Ya te han contestado los compañero. Un saludo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Configuracion de las Xs
El día 29 de junio de 2008 23:39, consultores [EMAIL PROTECTED] escribió: On Mon, 2008-06-30 at 02:19 +0200, Jorge Barreiro Gonzalez wrote: O Domingo 29 Xuño 2008 20:54, consultores escribiu: On Sun, 2008-06-29 at 10:02 +0200, BasaBuru wrote: El Domingo 29 Junio 2008 04:00:56 consultores escribió: Hola Alguien sabe y quiere describir, como configurar con el modulo libre para las tarjetas NVidia, por favor? Por lo que cuentas de debe faltar el driver nv. apt-get install xserver-xorg-video-nv Esta instalado, pero es como si no estuviese. Ya lo reinstale y nada cambia. Ya probe con module-assistant y solo aparecen kernel y kernel L, he instalado todo lo relacionado con nvidia y nada. Gracias. No hay un módulo del kernel para el driver 'nv'. Simplemente con que tengas instalado el paquete y pongas nv como driver en el xorg.conf ya vale. Si no funciona tendrás que comentarnos qué es lo que falla. Busca mensajes de error en el log del servidor X. ( /var/log/Xorg.0.log ). Si puedes péga lo que veas en tu respuesta. Ver como tienes la sección device de tu xorg.conf también podría ayudar. xorg.conf: Section InputDevice Identifier Generic Keyboard Driver kbd Option XkbRules xorg Option XkbModel pc104 Option XkbLayout us EndSection Section InputDevice Identifier Configured Mouse Driver mouse EndSection Section Device Identifier Configured Video Device EndSection Section Monitor Identifier Configured Monitor EndSection Section Screen Identifier Default Screen Monitor Configured Monitor EndSection PD: Lo pongo completo, por que tampoco me configura correctamente el touchpad de la portatil. Segun yo deberia de ser psmouse y no mouse. Luego es muy sencillo. Tienes centenares de howtos sobre esto. Es tirar de yahoo. Un saludo BasaBuru -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] En ningún lugar aparece el driver, en mi compu aparece así: -- Section Device Identifier Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller Driver i810 Option DRI true EndSection -- En tu caso cambia i810 por nv si usas el paquete de Debian; nvidia si usas el paquete oficial de Nvidia. Para el touchpad lo tengo así: --- Section InputDevice Identifier Synaptics Touchpad Driver synaptics Option SendCoreEventstrue Option Device/dev/psaux Option Protocol auto-dev Option HorizScrollDelta 0 EndSection Suerte Marcos Delgado. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bash history
Buenas Lista. Donde se especifica cada cuanto tiempo se limpia el bash_history de un usuario? Una vez borrado queda almacenado en algun historico? Muchas Gracias. Salu2. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Bash history
2008/6/30 ciracusa [EMAIL PROTECTED]: Buenas Lista. Donde se especifica cada cuanto tiempo se limpia el bash_history de un usuario? En la variable de entorno $HISTSIZE, por defecto son 500 comandos que registra. Una vez borrado queda almacenado en algun historico? Hasta donde se no. -- シャカ mbrenes.blogspot.com | sibu.homelinux.org debian gnu/linux Para que no se me olvide http://wiki.debian.org/Normas_Lista_Gmail -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
freeradius ssl recompilar
Necesito conectar el freeradius con un AD, para eso se necesitan peap que depende de openssl, pero el paquete de debian esta compilado sin ssl. Puedo instalar del tgz original de freeradius, pero prefiero no dejar sucio el sistema, por lo que he pensado en dos opciones. A) recompilar con apt-build el paquete añadiendo las librerias ssl. B) como el paquete trae un directorio /debian generar un paquete con dpkg-buldpackage. ¿Cual opción es mejor?, ¿Como aprender a hacerlo? ¿Hay otra forma? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
freeradius ssl recompilar
Necesito conectar el freeradius con un AD, para eso se necesitan peap que depende de openssl, pero el paquete de debian esta compilado sin ssl. Puedo instalar del tgz original de freeradius, pero prefiero no dejar sucio el sistema, por lo que he pensado en dos opciones. A) recompilar con apt-build el paquete añadiendo las librerias ssl. B) como el paquete trae un directorio /debian generar un paquete con dpkg-buldpackage. ¿Cual opción es mejor?, ¿Como aprender a hacerlo? ¿Hay otra forma? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: sais con soporte linux
El lun, 23-06-2008 a las 13:46 +0200, Luis Miguel R. escribió: Buenas, estoy buscando una marca de sais (UPS) que tengan soporte en linux (para el tema del shutdown), y que lo hagan por puerto serie, he visto alguna utilidad en debian, pero no se que marcan soportan. Un saludo. Fabricante APC, y paquete apcupsd, lo mejor que he visto hasta ahora para servidores, se puede programar para que segun criterios de tiempo o carga apague el servidor, checks de estado de la bateria, etc... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Autentificar usuarios en Samba para carpetas diferentes
Copio y pego de mi smb.conf [homes] comment = Home Directories browseable = no # By default, the home directories are exported read-only. Change next # parameter to 'yes' if you want to be able to write to them. writable = yes # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. create mask = 0700 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. directory mask = 0700 *# Restrict access to home directories # to the one of the authenticated user* # This might need tweaking when using external authentication schemes valid users = %S La parte en negrita es para que los usuarios sólo puedan acceder a su home directory. Una vez creados los usuarios en el propio sistema, los creas también en samba con: smbpasswd -a username El prompt te pedirá la pass y su correspondiente verificación. El día 30 de junio de 2008 15:20, Rafael Pérez Saborit [EMAIL PROTECTED] escribió: Hola Listeros... Como Podría en samba en un servidor samba habilitar cuentas de usuarios para carpetas diferentes, Para que cada usuario acceda solo la carpeta correspondiente. Carezco de Internet y de manuales podrían ser específicos con sus respuestas... Gracias de antemano. ___ Servicio de E-MAIL Dirección Municipal de Educación Río Cauto - Granma - Cuba -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
de cisco a iptables
hola, bueno les comento que hoy utilizo como firewall un cisco que viene funcionando bien, pero que me da cada tanto problemas de hardware, por lo que estoy interesado en pasar a un equipo con linux e iptables, para hacerlo funcionar como firewall. El tema es que no tengo bien claro como traducir las reglas que tengo configuradas en el cisco a iptables. Alguno tiene idea donde puedo conseguir información acerca d esto? gracias -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: de cisco a iptables
On Mon, Jun 30, 2008 at 4:10 PM, Carlos Moreira [EMAIL PROTECTED] wrote: hola, bueno les comento que hoy utilizo como firewall un cisco que viene funcionando bien, pero que me da cada tanto problemas de hardware, por lo que estoy interesado en pasar a un equipo con linux e iptables, para hacerlo funcionar como firewall. El tema es que no tengo bien claro como traducir las reglas que tengo configuradas en el cisco a iptables. Alguno tiene idea donde puedo conseguir información acerca d esto? gracias Y... lo mas simple es hacer una copia de tu running-config pasandola a un archivo de texto y alli ponerte a ver que es lo que esta haciendo. Saludos -- La Voluntad es el unico motor de nuestros logros Mstaaravin / http://www.mstaaravin.com.ar/
Re: de cisco a iptables
2008/6/30 Carlos Moreira [EMAIL PROTECTED]: Ok, pero el problema que yo tengo es cuando leo una regla en cisco, y la intento escribir con iptables, no se bien como hacerlo... Entonces lo que tienes que hacer es aprender iptables, asi de simple Y por favor no respondas al privado, hazlo a la lista. Cuando des reply/responder cambia el destino y pon el mail de la lista -- La Voluntad es el unico motor de nuestros logros Mstaaravin / http://www.mstaaravin.com.ar/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
RE: de cisco a iptables
Y si probas escribir una linea y te ayudamos todos ? -Mensaje original- De: Carlos Miranda [mailto:[EMAIL PROTECTED] Enviado el: Lunes, 30 de Junio de 2008 17:15 Para: Lista Debian Asunto: Re: de cisco a iptables 2008/6/30 Carlos Moreira [EMAIL PROTECTED]: Ok, pero el problema que yo tengo es cuando leo una regla en cisco, y la intento escribir con iptables, no se bien como hacerlo... Entonces lo que tienes que hacer es aprender iptables, asi de simple Y por favor no respondas al privado, hazlo a la lista. Cuando des reply/responder cambia el destino y pon el mail de la lista -- La Voluntad es el unico motor de nuestros logros Mstaaravin / http://www.mstaaravin.com.ar/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
[Fwd: Re: de cisco a iptables]
Carlos Miranda escribió: On Mon, Jun 30, 2008 at 4:10 PM, Carlos Moreira [EMAIL PROTECTED] wrote: hola, bueno les comento que hoy utilizo como firewall un cisco que viene funcionando bien, pero que me da cada tanto problemas de hardware, por lo que estoy interesado en pasar a un equipo con linux e iptables, para hacerlo funcionar como firewall. El tema es que no tengo bien claro como traducir las reglas que tengo configuradas en el cisco a iptables. Alguno tiene idea donde puedo conseguir información acerca d esto? gracias Y... lo mas simple es hacer una copia de tu running-config pasandola a un archivo de texto y alli ponerte a ver que es lo que esta haciendo. Saludos Ok, pero el problema que yo tengo es cuando leo una regla en cisco, y la intento escribir con iptables, no se bien como hacerlo... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Limitar a un usuario a que solo pueda ejecutar telnet en su sesión?
2008/6/29 adriancito [EMAIL PROTECTED]: Buenas lista. Como podría hacer para que un determinado usuario, luego de conectarse vía SSH a un server Linux solo tenga disponible el comando telnet? Es mas, quisiera que solo pueda hacer telnet a una determinada ip de la red exclusivamente. Muchas Gracias. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Yo diría que el .profile llame a un shell que presente un menu y solo le permita hacer el telnet o salir. Tienes que atrapar los signals para que no se salga o suspenda Manuel Soto
Re: de cisco a iptables
2008/6/30 Carlos Moreira [EMAIL PROTECTED]: hola, bueno les comento que hoy utilizo como firewall un cisco que viene funcionando bien, pero que me da cada tanto problemas de hardware, por lo que estoy interesado en pasar a un equipo con linux e iptables, para hacerlo funcionar como firewall. El tema es que no tengo bien claro como traducir las reglas que tengo configuradas en el cisco a iptables. Alguno tiene idea donde puedo conseguir información acerca d esto? gracias -- La mejor documentación sobre iptables en: http://www.netfilter.org/ Suerte...!!! -- Gonzalo L. Campos Medina http://www.ubuntu.com | http://www.ubuntu-es.org | http://www.ubuntu-pe.org L.R.U. #344192 | U.R.U. #161 Freenode #ubuntu-es #edubuntu-es #ubuntu-pe -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Control de Tráfico en Linux - Traffic Shapping
Hola compañeros. Dado un equipo con Debian Lenny haciendo las veces de proxy/router, y actualmente corriendo Squid/Dansguardian perfectamente, que me recomiendan ir leyendo para implementar control de tráfico: - delay pools - tc - ambos? Muchas Gracias a todos! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Control de Tráfico en Linux - Traff ic Shapping
tq escribió: Hola compañeros. Dado un equipo con Debian Lenny haciendo las veces de proxy/router, y actualmente corriendo Squid/Dansguardian perfectamente, que me recomiendan ir leyendo para implementar control de tráfico: - delay pools - tc - ambos? No conozco delay pools por lo que te recomiendo iproute (utilidades ip y tc). Con tc puedes hacer mucho. http://www.linuxfoundation.org/en/Net:Iproute2_examples http://ornellas.apanela.com/dokuwiki/pub:firewall_and_adv_routing -- Kevin Josue Zambrano Chavez Linux Counter #395394 - http://counter.li.org/ Si la base de la sociedad es ayudar a los demas, porque decir no a la libertad de modificar y compartir el software? (Richard Stallman) La imaginacion es mas importante que el conocimiento (Albert Einstein) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
¡Ven y únete a Moneybookers en Networkers Community...!
Networkers Community: Rompiendo las barreras de la comunicacion... Pablo has invited you to join Moneybookers on Networkers Community Pague con moneybookers.com! Nos complace ofrecerle una nueva y simple manera de pagar: Check out Moneybookers on Networkers Community: http://www.networkerscommunity.com/group/moneybookers?xgi=fZDrQQv If your email program doesn't recognize the web address above as an active link, please copy and paste it into your web browser About Moneybookers on Networkers Community Pague con moneybookers.com! Nos complace ofrecerle una nueva y simple manera de pagar en la WEB 1 miembro Creado por: Pablo About Networkers Community... Networkers Community es la alternativa real de construir una lista de contactos... 2319 miembros 160 videos 286 discussions 39 events 194 blog posts To control which emails you receive on the corner, or to opt-out, go to: http://www.networkerscommunity.com/profiles/profile/emailSettings
Re: Ajuda com rede wireless doméstica
tah olha soh: primeiro: tua rede de ve usar criptografia, kual eh ? WPA ou WEP ? segundo: qual a tua placa wireless? falouu... 2008/6/30 Sergio Pereira [EMAIL PROTECTED]: Sávio Ramos escreveu: Olá, Meu sogro Instalou o OpenSuse no notebook dele e não teve sucesso em conectar-se à rede sem fio que já está instalada em sua casa. Me pediu ajuda, mas não entendo nadica_de_nada de rede sem fio e nada consegui. Qual é o procedimento para fazer funcionar a trapizonga? Grato. P.S. Desnecessário dizer que no winblows tudo funciona... Supondo que a placa wi-fi foi reconhecida e que ele está usando o Gnome: SistemaAdministraçãoRede No menu de administração de rede, basta selecionar a placa em questão, clicar no botão Propriedades e preencher os campos: nome de rede (ESSID), Tipo de senha, Senha da rede, Configuração (IP estático ou DHCP). Se for estático, preencher os campos IP, máscara ou gw. Se for DHCP, dispensa maiores comentários. No link a seguir tem um tutorial bem simples: http://www.guiadohardware.net/tutoriais/configurando-rede-wireless-linux/ Grande abraço e boa sorte. Sérgio -- Soluções em Automação e Controle Integrador Autorizado: Metaltex - Atos - Dexter - AllConverge - Dakol - Elipse - Conversoft Linux User #426387 Linux: A liberdade da escolha. A escolha da liberdade. The freedom of the choice. The choice of the freedom. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (GNU/Linux) iD8DBQFF9vhuJ+YDTomMwA8RAvSAAJoDwkzHJK3P98vEDx5pJxeyT3xyzgCg22/u W/MTldaxqdeNLjlWF49wpig= =MVB7 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- []'s ..:: Andi || Gaúcho ::..
RES: Modsecurity do apache - liberar [RESOLVIDO]
Olá pessoal. Achei o problema no forum em ingles do modsecurity. Não sei ao certo o porque, mas o pessoal disse que a nova versão do modsecurity corrigiria este problema. Substitui apenas o arquivo de http policy do antigo para o novo (versão 2.4) e consegui acessar a ferramenta sem problemas. []'s Daniel -Mensagem original- De: Allison Vollmann [mailto:[EMAIL PROTECTED] Enviada em: sexta-feira, 27 de junho de 2008 12:02 Para: debian-user-portuguese@lists.debian.org Assunto: Re: Modsecurity do apache - liberar Parece que você está tentando acessar outro host através de http requests, eu nunca utilizei esse JCE, mas você o configurou certinho com o mesmo nome de host que a página está hospedada, use um debbuger no browser para monitorar estes requests (recomendo o firebug)? Abraços. Daniel escreveu: Olé pessoal. Com relação ao modsecurity, eu uma vez há muito tempo atrás instalei no meu server e utilizei as confs defaults. Hoje, o pessoal do serviço está querendo utilizar o joomla com o editor JCE que possibilita upload de arquivos pelo frontend do site. Porém, ao clicar no browser file, o sistema acusa um erro e descobri que o modsecurity está bloqueando a exibição da informação, mas não sei muito bem como lidar com isso. O erro é o seguinte (do log do apache): ModSecurity: Access denied with code 501 (phase 1). Match of rx (?:^(?:application/x-www-form-urlencoded$|multipart/form-data;)|text/xml) against REQUEST_HEADERS:Content-Type required. [id 960010] [msg Request content encoding is not allowed by policy] [severity WARNING] [hostname meu site] [uri /pasta//index.php?option=com_jcetask=pluginplugin=browserfile=br owsertype=file150beta4] [unique_id CtIFP49r7sIAAAwR-DQC] Como eu faço pra habilitar que o jce funcione legal sem que eu deixe pra trás a segurança do site? Obrigado e um abraço a todos. Daniel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Debian em Placa DG33BU
Olá pessoal, Instalei o Debian versão amd64 em uma máquina com placa DG33BU. Ele não detecta a placa de rede de forma alguma. Na verdade, usando o comando lspci, aparece o seguinte: 00:19.0 Ethernet controller: Intel Corporation Unknown device 294c (rev 02) 06:00.0 Ethernet controller: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY (rev 31) A primeira é a placa onboard. A segunda placa é uma placa extra que coloquei e essa funciona blza. O módulo dessa placa onboard tb é carregado (e1000) mas nenhuma interface de rede é montada para essa placa. No arquivo /prod/net/dev aparece o seguinte: Inter-| Receive| Transmit face |bytespackets errs drop fifo frame compressed multicast|bytespackets errs drop fifo colls carrier compressed lo: 16309 36000 0 0 0 16309 36000 0 0 0 eth1: 34796 374000 0 0 0 35004 257000 0 0 0 eth2: 0 0000 0 0 0 0 0000 0 0 0 sit0: 0 0000 0 0 0 0 0000 0 0 0 Penso que essa placa deveria ser montada na interface eth0. A interface eth2 é um dispositivo firewire, que pelo que vi não tem nada a ver com interface de rede. Olhando os dados gerados pelo dmesg: debian:~# dmesg | grep eth eth0: IC Plus Corporation IP100A FAST Ethernet Adapter at 00011400, 00:06:4f:55:ee:63, IRQ 58. eth0: MII PHY found at address 0, status 0x786d advertising 01e1. eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) eth1: Link changed: 100Mbps, full duplex eth1: no IPv6 routers present eth1: no IPv6 routers present Isso que é montado em eth0 é esse dispositivo firewire (vi pelo mac address). O que poderia ser? Abs Fernando -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian em Placa DG33BU
Fernando Xavier escreveu: Ele não detecta a placa de rede de forma alguma. Na verdade, usando o comando lspci, aparece o seguinte: 00:19.0 Ethernet controller: Intel Corporation Unknown device 294c (rev 02) É muito estranho essa placa intel não ser reconhecida. Tente executar o comando update-pciids, pois no meu Debian Lenny o ID 294c consta como sendo da Intel, modelo 82566DC-2 Gigabit Network Connection. Att, Renato -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian em Placa DG33BU
Valeu pela resposta Renato. Executei o comando e ele atualizou a lista. Mas a interface eth0 ainda não é liberada. Instalei uma placa D-link dge 530T e o debian reconheceu na hora. Nem precisei instalar driver. Abs Fernando On Mon, Jun 30, 2008 at 11:50 AM, Renato S. Yamane [EMAIL PROTECTED] wrote: Fernando Xavier escreveu: Ele não detecta a placa de rede de forma alguma. Na verdade, usando o comando lspci, aparece o seguinte: 00:19.0 Ethernet controller: Intel Corporation Unknown device 294c (rev 02) É muito estranho essa placa intel não ser reconhecida. Tente executar o comando update-pciids, pois no meu Debian Lenny o ID 294c consta como sendo da Intel, modelo 82566DC-2 Gigabit Network Connection. Att, Renato -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
[assunto paralelo] como doar hardware para o projeto debian
Olá, Tenho alguns itens de hardware um tanto velhos que eu gostaria de doar ao projeto debian e gostaria de saber como posso fazê-lo. Não tenho muito tempo agora, e não vou ter pelos próximos meses, por isso não posso ajudar com testes e quetais e gostaria que o equipamento pudesse servir a uma causa nobre, por assim dizer.. A lista é a seguinte: um AppleMacintoshPerforma 6230CD oldworld PowerPC; um par de Performas baseados na arquitetura 68k com disco mas sem monitor; e um iMac Newworld PowerPC (500Mhz) (sem gaveta para cd) com a placa lógica queimada e sem HD. Moro em Curitiba, qualquer proximidade facilitaria muito a entrega. Sugestões? Grato, -- Gunther Furtado [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian em Placa DG33BU
Fernando Xavier escreveu: Renato S. Yamane wrote: Fernando Xavier escreveu: Ele não detecta a placa de rede de forma alguma. Na verdade, usando o comando lspci, aparece o seguinte: 00:19.0 Ethernet controller: Intel Corporation Unknown device 294c (rev 02) Tente executar o comando update-pciids, pois no meu Debian Lenny o ID 294c consta como sendo da Intel, modelo 82566DC-2 Gigabit Network Connection. Executei o comando e ele atualizou a lista. Mas a interface eth0 ainda não é liberada. . Como assim não é liberada? Já tentou executar o /etc/init.d/network restart?? Informe o resultado de: #ifconfig E o conteúdo de: /etc/udev/rules.d/z25_persistent-net.rules /etc/network/interfaces Att, Renato -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Recuperar Diretório Removido
Pessoal Não tenho beackup. Mas equivocadamente removi (rm -rf) um diretorio com varios arquivos. Há como recuperá-lo??? grato Novos endereços, o Yahoo! que você conhece. Crie um email novo com a sua cara @ymail.com ou @rocketmail.com. http://br.new.mail.yahoo.com/addresses -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Recuperar Diretório Removido
Não. Só com aquelas ferramentas de recuperação de HD, se você estiver com sorte. On Mon, Jun 30, 2008 at 2:02 PM, Adriano [EMAIL PROTECTED] wrote: Pessoal Não tenho beackup. Mas equivocadamente removi (rm -rf) um diretorio com varios arquivos. Há como recuperá-lo??? grato Novos endereços, o Yahoo! que você conhece. Crie um email novo com a sua cara @ymail.com ou @rocketmail.com. http://br.new.mail.yahoo.com/addresses -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian em Placa DG33BU
Oi Renato,
seguem os dados no final.
se eu tento configurar a eth0 no /etc/network/interfaces ele dá no such device
abs
fernando
ifconfig
eth1 Link encap:Ethernet HWaddr 00:06:4F:55:EE:63
inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:4fff:fe55:ee63/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:146 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:18602 (18.1 KiB) TX bytes:708 (708.0 b)
Interrupt:58 Base address:0x1400
eth3 Link encap:Ethernet HWaddr 00:1C:F0:15:45:31
inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21c:f0ff:fe15:4531/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1440 errors:0 dropped:0 overruns:0 frame:0
TX packets:1429 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:247242 (241.4 KiB) TX bytes:724476 (707.4 KiB)
Interrupt:74
loLink encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6042 errors:0 dropped:0 overruns:0 frame:0
TX packets:6042 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2144864 (2.0 MiB) TX bytes:2144864 (2.0 MiB)
debian:/home# more /etc/udev/rules.d/z25_persistent-net.rules
# Firewire device 0090270002044488 (ohci1394)
#SUBSYSTEM==net, DRIVERS==?*,
ATTRS{address}==00:90:27:00:02:04:44:88, NAME=eth0
# PCI device 0x13f0:0x0200 (sundance)
SUBSYSTEM==net, DRIVERS==?*, ATTRS{address}==00:06:4f:55:ee:63,
NAME=eth1
# Firewire device 0090270002044488 (ohci1394)
SUBSYSTEM==net, DRIVERS==?*,
ATTRS{address}==00:90:27:00:02:04:44:88, NAME=eth2
# PCI device 0x1186:0x4b01 (skge)
SUBSYSTEM==net, DRIVERS==?*, ATTRS{address}==00:1c:f0:15:45:31,
NAME=eth3
/etc/network/interfaces
# The loopback network interface
auto lo
iface lo inet loopback
allow-hotplug eth3
iface eth3 inet static
address 192.168.1.6
netmask 255.255.255.0
network 192.168.1.0
gateway 192.168.1.1
auto eth3
allow-hotplug eth1
iface eth1 inet static
address 192.168.1.5
netmask 255.255.255.0
network 192.168.1.0
gateway 192.168.1.1
auto eth1
On Mon, Jun 30, 2008 at 1:23 PM, Renato S. Yamane
[EMAIL PROTECTED] wrote:
Fernando Xavier escreveu:
Renato S. Yamane wrote:
Fernando Xavier escreveu:
Ele não detecta a placa de rede de forma alguma. Na verdade, usando o
comando lspci, aparece o seguinte:
00:19.0 Ethernet controller: Intel Corporation Unknown device 294c (rev 02)
Tente executar o comando update-pciids, pois no meu Debian Lenny o ID
294c consta como sendo da Intel, modelo 82566DC-2 Gigabit Network
Connection.
Executei o comando e ele atualizou a lista.
Mas a interface eth0 ainda não é liberada.
.
Como assim não é liberada?
Já tentou executar o /etc/init.d/network restart??
Informe o resultado de:
#ifconfig
E o conteúdo de:
/etc/udev/rules.d/z25_persistent-net.rules
/etc/network/interfaces
Att,
Renato
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Recuperar Diretório Removido
Boa tarde, Alguns dias atrás, um amigo postou aqui na lista, uma ferramento que o ajudou em recuperar o /home de um disco que havia sido formatado e instalado MS Windows. Guardei o link, pois achei interessante. Veja se pode ajudar: http://www.cgsecurity.org/wiki/TestDisk 2008/6/30 Rafael Gomes Dantas [EMAIL PROTECTED]: Não. Só com aquelas ferramentas de recuperação de HD, se você estiver com sorte. On Mon, Jun 30, 2008 at 2:02 PM, Adriano [EMAIL PROTECTED] wrote: Pessoal Não tenho beackup. Mas equivocadamente removi (rm -rf) um diretorio com varios arquivos. Há como recuperá-lo??? grato Novos endereços, o Yahoo! que você conhece. Crie um email novo com a sua cara @ymail.com ou @rocketmail.com. http://br.new.mail.yahoo.com/addresses -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- [.]´s ..:: S.e.r.i.a.L ::..
RES: Modsecurity do apache - liberar [RESOLVIDO]
Leandro, Segue o link para download do modsecurity para debian http://etc.inittab.org/~agi/debian/libapache-mod-security2/ Fonte http://www.modsecurity.org/download/index.html []'s Daniel -Mensagem original- De: Leandro Moreira [mailto:[EMAIL PROTECTED] Enviada em: segunda-feira, 30 de junho de 2008 09:03 Para: Daniel Assunto: Re: RES: Modsecurity do apache - liberar [RESOLVIDO] Caros, Como vocês estão instalando o modsecurity, por pacote ou compilação, se for por pacote onde consigo já que nos repositórios oficiais não há mais. Att. Leandro Moreira On Mon, 30 Jun 2008 08:20:06 -0300, Daniel [EMAIL PROTECTED] wrote: Olá pessoal. Achei o problema no forum em ingles do modsecurity. Não sei ao certo o porque, mas o pessoal disse que a nova versão do modsecurity corrigiria este problema. Substitui apenas o arquivo de http policy do antigo para o novo (versão 2.4) e consegui acessar a ferramenta sem problemas. []'s Daniel -Mensagem original- De: Allison Vollmann [mailto:[EMAIL PROTECTED] Enviada em: sexta-feira, 27 de junho de 2008 12:02 Para: debian-user-portuguese@lists.debian.org Assunto: Re: Modsecurity do apache - liberar Parece que você está tentando acessar outro host através de http requests, eu nunca utilizei esse JCE, mas você o configurou certinho com o mesmo nome de host que a página está hospedada, use um debbuger no browser para monitorar estes requests (recomendo o firebug)? Abraços. Daniel escreveu: Olé pessoal. Com relação ao modsecurity, eu uma vez há muito tempo atrás instalei no meu server e utilizei as confs defaults. Hoje, o pessoal do serviço está querendo utilizar o joomla com o editor JCE que possibilita upload de arquivos pelo frontend do site. Porém, ao clicar no browser file, o sistema acusa um erro e descobri que o modsecurity está bloqueando a exibição da informação, mas não sei muito bem como lidar com isso. O erro é o seguinte (do log do apache): ModSecurity: Access denied with code 501 (phase 1). Match of rx (?:^(?:application/x-www-form-urlencoded$|multipart/form-data;)|text/xml) against REQUEST_HEADERS:Content-Type required. [id 960010] [msg Request content encoding is not allowed by policy] [severity WARNING] [hostname meu site] [uri /pasta//index.php?option=com_jcetask=pluginplugin=browserfile=b r owsertype=file150beta4] [unique_id CtIFP49r7sIAAAwR-DQC] Como eu faço pra habilitar que o jce funcione legal sem que eu deixe pra trás a segurança do site? Obrigado e um abraço a todos. Daniel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] !DSPAM:1,4868c2b323991025213504! -- Leandro Moreira Linux Networks e-mail: [EMAIL PROTECTED] Tel.: + 55(32) 9956-4732 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Resp.: Recuperar Diretório Removido
procure também pelo ext3grep, segue a mesma metodologia do testdisk, porém um método mais baixo nível. Em 30/06/08, ..:: S.e.r.i.a.L ::..[EMAIL PROTECTED] escreveu: Boa tarde, Alguns dias atrás, um amigo postou aqui na lista, uma ferramento que o ajudou em recuperar o /home de um disco que havia sido formatado e instalado MS Windows. Guardei o link, pois achei interessante. Veja se pode ajudar: http://www.cgsecurity.org/wiki/TestDisk 2008/6/30 Rafael Gomes Dantas [EMAIL PROTECTED]: Não. Só com aquelas ferramentas de recuperação de HD, se você estiver com sorte. On Mon, Jun 30, 2008 at 2:02 PM, Adriano [EMAIL PROTECTED] wrote: Pessoal Não tenho beackup. Mas equivocadamente removi (rm -rf) um diretorio com varios arquivos. Há como recuperá-lo??? grato Novos endereços, o Yahoo! que você conhece. Crie um email novo com a sua cara @ymail.com ou @rocketmail.com. http://br.new.mail.yahoo.com/addresses -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- [.]´s ..:: S.e.r.i.a.L ::.. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian em Placa DG33BU
2008/6/30 Fernando Xavier [EMAIL PROTECTED]:
[...]
Não sei se esta é a causa de todos seus males mas...
debian:/home# more /etc/udev/rules.d/z25_persistent-net.rules
[...]
ATTRS{address}==00:90:27:00:02:04:44:88, NAME=eth0
[...]
ATTRS{address}==00:90:27:00:02:04:44:88, NAME=eth2
Significa que uma mesma placa está recebendo dois endereços.
Experimente comentar a segunda entrada e veja o que acontece.
[...]
Abraços,
--
Gunther Furtado
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian em Placa DG33BU
Fernando Xavier escreveu:
se eu tento configurar a eth0 no /etc/network/interfaces ele dá no such
device
# cat /etc/udev/rules.d/z25_persistent-net.rules
# Firewire device 0090270002044488 (ohci1394)
#SUBSYSTEM==net, DRIVERS==?*,
ATTRS{address}==00:90:27:00:02:04:44:88, NAME=eth0
É porque a eth0 está sendo atribuida a interface firmware conforme
listado no arquivo z25_persistent-net.rules
Tente rodar o script que está em:
/lib/udev/write_net_rules
Creio que isso resolverá a questão levantada pelo Gunther também.
Do contrário, eu acho que você terá que editar manualmente o
/etc/udev/rules.d/z25_persistent-net.rules inserindo as informações da
sua placa de rede e eliminando a duplicidade da eth0/eth2
Att,
Renato
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian em Placa DG33BU
Na verdade a linha que atribui para a eth0 está comentada.
Eu comentei essa antes para tirar essa atribuição mas quando reiniciei
ele criou essa linha com atribuição para a eth2.
Abs
Fernando
2008/6/30 Renato S. Yamane [EMAIL PROTECTED]:
Fernando Xavier escreveu:
se eu tento configurar a eth0 no /etc/network/interfaces ele dá no such
device
# cat /etc/udev/rules.d/z25_persistent-net.rules
# Firewire device 0090270002044488 (ohci1394)
#SUBSYSTEM==net, DRIVERS==?*,
ATTRS{address}==00:90:27:00:02:04:44:88, NAME=eth0
É porque a eth0 está sendo atribuida a interface firmware conforme
listado no arquivo z25_persistent-net.rules
Tente rodar o script que está em:
/lib/udev/write_net_rules
Creio que isso resolverá a questão levantada pelo Gunther também.
Do contrário, eu acho que você terá que editar manualmente o
/etc/udev/rules.d/z25_persistent-net.rules inserindo as informações da
sua placa de rede e eliminando a duplicidade da eth0/eth2
Att,
Renato
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Recuperar Diretório Removido
Lembrando que é bom você evitar ao máximo a escrita nesse hd, pois quanto mais você escrever nele, maior é a chance de sobreescrever os dados. [Sempre esqueço de dar Replay All, desculpe a mensagem errada, Lucas]
Re: Ajuda com rede wireless doméstica
Em Mon, 30 Jun 2008 08:14:41 -0300 ..:: Andi || Gaucho ::.. [EMAIL PROTECTED] escreveu: primeiro: tua rede de ve usar criptografia, kual eh ? WPA ou WEP ? Como vejo isto? Lembre-se que a rede só está funcionando no winblows. segundo: qual a tua placa wireless? Qual o comando para descobrir? lspci? Grato. -- Sávio M Ramos Arquiteto, Rio, RJ Só uso Linux desde 2000 www.debian.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian em Placa DG33BU
Em Mon, 30 Jun 2008 11:29:51 -0300 Fernando Xavier [EMAIL PROTECTED] escreveu: Instalei o Debian versão amd64 em uma máquina com placa DG33BU. Instalei em uma placa DG33FB e tive que colocar o driver que veio no CD da Intel. Feito isto atualizei o núcleo e a placa de rede foi reconhecida automaticamente. -- Sávio M Ramos Arquiteto, Rio, RJ Só uso Linux desde 2000 www.debian.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian em Placa DG33BU
2008/6/30 Sávio Ramos [EMAIL PROTECTED]: Em Mon, 30 Jun 2008 11:29:51 -0300 Fernando Xavier [EMAIL PROTECTED] escreveu: Instalei o Debian versão amd64 em uma máquina com placa DG33BU. Instalei em uma placa DG33FB e tive que colocar o driver que veio no CD da Intel. Feito isto atualizei o núcleo e a placa de rede foi reconhecida automaticamente. Desculpe a ignorância, mas qual é exatamente o procedimento de atualização do núcleo? -- Sávio M Ramos Arquiteto, Rio, RJ Só uso Linux desde 2000 www.debian.org Abraço, -- Gunther Furtado [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Portas para acesso ao Bind9
Instalei em um servidor o Bind9 apenas para cadastrar um DNS Reverso, esse servidor esta como Master na delegação de DNS Reverso junto ao Registro.BR. Gostaria de saber qual porta devo deixar aberta no iptable para que funcione corretamente? Devo deixar a 43(UDP/TCP) e 53(UDP/TCP) ou posso bloquear alguma? Obrigado, Rogério Naressi -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Portas para acesso ao Bind9
Em Seg, 2008-06-30 às 17:13 -0300, Rogério Oliveira Naressi escreveu: Instalei em um servidor o Bind9 apenas para cadastrar um DNS Reverso, esse servidor esta como Master na delegação de DNS Reverso junto ao Registro.BR. Gostaria de saber qual porta devo deixar aberta no iptable para que funcione corretamente? Devo deixar a 43(UDP/TCP) e 53(UDP/TCP) ou posso bloquear alguma? a porta 53 udp serve para que clientes acessem o seu DNS ( seja ele master/slave ou qualquer outro) a porta 53 tcp serve principalmente para a transferência de arquivos entre zonas. porta 43 desconheço80))) []s Obrigado, Rogério Naressi -- Paulo Ricardo Bruck - consultor tel 011 3596-4881 011 3596-4882 cel 011 9235-4327 Contato Global Solutions http://www.contato.com.br -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Portas para acesso ao Bind9
Olá Rogério, Deixando apenas a 53(udp) aberta já se o suficiente. -- Atenciosamente, Rafael Balbino Rogério Oliveira Naressi escreveu: Instalei em um servidor o Bind9 apenas para cadastrar um DNS Reverso, esse servidor esta como Master na delegação de DNS Reverso junto ao Registro.BR. Gostaria de saber qual porta devo deixar aberta no iptable para que funcione corretamente? Devo deixar a 43(UDP/TCP) e 53(UDP/TCP) ou posso bloquear alguma? Obrigado, Rogério Naressi -- Assine agora mesmo a melhor Internet do RN !!! ACT Provedor de Internet http://www.act.psi.br -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Recomendações de Multifuncional para uso com o Debian SID (e Etch tb)
Pessoal, comprei uma HP Photosmart c4280. Muito boa. Usei o hplip pra configurar, com meia duzia de comandos tá tudo funcionando blza. recomendo, impressora boa, bunita e barata. :) abs 2008/5/5 Still [EMAIL PROTECTED]: * Konnichiwa Guilherme Rocha-sama: Pessoal, eu estou pesquinsando uma multifuncional para aquisição (para meu uso pessoal), dessas baratas, que fazem tudo por um custo inicial de aprox R$ 400,00. Olhei alguns modelos EPSON e HP bem em conta, ambos próximos de 300 reais, a questão é saber se ela vai realmente funcionar no Debian, com todos os recursos... Eu uso o Debian SID com os kerneis, 2.6.22-3 e 2.6.24-1. (mas tem máquinas com Etch que deveriam rodar tudo blza tb.) Uso aqui uma Epson CX4500 e estou muito satisfeito com ela. Imprime normal, inclusive fotos, embora nunca tenha testado a qualidade máxima e utilizo o scanner com o xsane numa boa. Os cartuchos são baratos e individuais. Comprei hj 5 jogos de 4 cartuchos por 98 reais. Claro que são alternativos, mas funcionam muito bem. Eu recomendo. []'s, Still -- Nelson Luiz Campos Engenheiro Eletricista Linux User #89621 UIN 11464303 gnupgID: 55577339 Skype Still_by_Still -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFIH5rTvfbs9VVXczkRAoGDAJ9wovpF9y1X1EXko6ilzx36zCsCLQCfW0mN diVSoSBu5SSGEyUkhuCN/r0= =6+cC -END PGP SIGNATURE- -- Guilherme Rocha Mobile 55 71 82032195 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Fw: driver nvidia transformou letras em quadros verdes
Iníciando encaminhamento de mensagem: Data: Mon, 30 Jun 2008 08:20:20 -0300 De: Eduardo Peters [EMAIL PROTECTED] Para: Gunther Furtado [EMAIL PROTECTED] Assunto: Re: driver nvidia transformou letras em quadros verdes Quais as opções de boot vc está usando? Seria legal vc mandar os parametros de /boot/grub/menu.lst pra gente. Elias Diniz escreveu: quando tento acessar o terminal (Ctrl+Alt+F1), no lugar das letras tem quadrados verdes, não dá pra ler nada. Com isso não consigo reinstalar o driver da Nvidia -- Eduardo Peters @ Canoinhas - SC - Brazil +55 47 9652 6661 msn: eduardo at peters.eng.br -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Fw: driver nvidia transformou letras em quadros verdes
2008/6/30 Gunther Furtado [EMAIL PROTECTED]:
Iníciando encaminhamento de mensagem:
Data: Mon, 30 Jun 2008 08:20:20 -0300
De: Eduardo Peters [EMAIL PROTECTED]
Para: Gunther Furtado [EMAIL PROTECTED]
Assunto: Re: driver nvidia transformou letras em quadros verdes
Quais as opções de boot vc está usando?
Seria legal vc mandar os parametros de /boot/grub/menu.lst pra gente.
Vou passar mais informações:
Gerenciador de boot: Grub2
Parametros de boot:
menuentry Debian GNU/Linux, linux 2.6.25esd {
linux /vmlinuz-2.6.25esd
root=UUID=b78c9dc8-0439-4d9a-b5f2-68b9f20bd364 ro vga=792 splash
GRUB_CMDLINE_LINUX=
initrd /initrd.img-2.6.25esd
}
Versão do xorg: 7.3
Driver da Nvidia: NVIDIA-Linux-x86-173.14.09-pkg1.run
Resumo do problema: Atualmente a interface gráfica sobe normalmente e a
acerelação de hardware funciona perfeitamente, entretanto, não consigo
acessar nenhum dos consoles através dos atalhos Ctrl+Alt+F1 a F6. (terminais
gráficos como o gnome-terminal, ou konsole abrem normalmente).
Quando pressiono essas teclas, a tela fica preta e em vez de aparecer as
letras do terminal, aparecem quadrados verdes.
Procedimentos executados:
- Reinstalação do driver da Nvidia;
- Alteração do driver do vídeo para vesa;
- Inserção da opção single no boot;
Nenhum dos procedimentos acima surtiu efeito.
Outras obsevações:
- Sempre executei a instalação do driver do Video através do arquivo
disponível no site da Nvidia.
- O problema começou depois que houve uma atualização do xorg.
LDAP addressbook/contacts
Hi guys, At work I have to connect to an Exchange server for mail. I use Kmail mostly, but'I've tried this in Thunderbird too, just to check. In both these, I have LDAP addressbooks configured, and this works well enough, except for one thing. Consider the following: Joe Soap [EMAIL PROTECTED] for some reason, both apps use the cn to get the Joe Soap part. In the LDAP repo, cn is actually joe.soap. Joe Soap is found in displayName Does anyone know how to make Kmail look at the displayName instead of cn? Thanks --kj -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: debian-user-digest Digest V2008 #1217
On Mon, Jun 30, 2008 at 05:38:43AM +0200, Gregg Jansen van Vuren wrote: i have asked this before a couple of months ago but procastinated a bit, and now can't seem to find the email with reply, so want to ask again, There are probably archives, but I tend to use a mail filter (procmail) and all my debian-user mails go to a debian-user folder, so all emails from this list are very easy to find an access, using grep, mutt and other useful tools. Perhaps you could look into that. basically what version of debian will suit my setup, foxconn motherboard, and intel pentium 4 processor, i think, i was suggeseted i686, but not sure anymore, Yeah [1][alpha] [[2]amd64] [[3]arm] [[4]hppa] [[5]i386] [[6]ia64] [[7]mips] Yes, i386 is probably what you want to get. Cheers, -- Daniel Dalton http://members.iinet.net.au/~ddalton/ [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Any idea why chroot temporarily cannot find name for group ID 0?
Ok, here it is. I apologize for its length, I want to include everything so you don't think I'm just doing some magic change without reporting it. First, I ssh into the server and try to chroot in, and lucky us, we're experiencing it right away. I cat /etc/group as requested: Last login: Sun Jun 29 02:31:35 2008 from 99-204-40-118.area1.spcsdns.net [EMAIL PROTECTED] ~]# chroot /svn/staging/ [EMAIL PROTECTED] ~]# cd /svn [EMAIL PROTECTED] svn]# chroot staging/www id: cannot find name for group ID 0 id: cannot find name for group ID 1 id: cannot find name for group ID 2 id: cannot find name for group ID 3 id: cannot find name for group ID 4 id: cannot find name for group ID 6 id: cannot find name for group ID 10 I have no [EMAIL PROTECTED]:/# cat /etc/group root:x:0: daemon:x:1: bin:x:2: sys:x:3: adm:x:4: tty:x:5: disk:x:6: lp:x:7: mail:x:8: news:x:9: uucp:x:10: man:x:12: proxy:x:13: kmem:x:15: dialout:x:20: fax:x:21: voice:x:22: cdrom:x:24: floppy:x:25: tape:x:26: sudo:x:27: audio:x:29: dip:x:30: www-data:x:33: backup:x:34: operator:x:37: list:x:38: irc:x:39: src:x:40: gnats:x:41: shadow:x:42: utmp:x:43: video:x:44: sasl:x:45: plugdev:x:46: staff:x:50: games:x:60: users:x:100: nogroup:x:65534: libuuid:x:101: I have no [EMAIL PROTECTED]:/# date Mon Jun 30 05:55:48 UTC 2008 I have no [EMAIL PROTECTED]:/# exit After that I exit the chroot and go right back in: [EMAIL PROTECTED] svn]# chroot staging/www I have no [EMAIL PROTECTED]:/# date Mon Jun 30 05:58:33 UTC 2008 I have no [EMAIL PROTECTED]:/# exit Note that even though only 3 minutes have passed, now for some reason it doesn't complain about the missing group names. This is a direct session copy -- I haven't done anything on the server whatsoever. I keep logging out and back in several times to see if it fixes itself: [EMAIL PROTECTED] svn]# chroot staging/www I have no [EMAIL PROTECTED]:/# date Mon Jun 30 06:02:37 UTC 2008 I have no [EMAIL PROTECTED]:/# exit [EMAIL PROTECTED] svn]# chroot staging/www I have no [EMAIL PROTECTED]:/# date Mon Jun 30 06:06:07 UTC 2008 I have no [EMAIL PROTECTED]:/# exit No luck. 10 minutes have passed and it's still busted. Just for grins, here's a look at the group permissions: [EMAIL PROTECTED] svn]# chroot staging/www I have no [EMAIL PROTECTED]:/# ls -latr /etc/group -rw-r--r-- 1 0 root 461 Jun 13 00:58 /etc/group I have no [EMAIL PROTECTED]:/# date Mon Jun 30 06:11:04 UTC 2008 I have no [EMAIL PROTECTED]:/# Note that the user is still 0, but it correctly recognizes the user group to be '0'. So, the mapping between group IDs and group names seems to be working, but the mapping for user IDs to names is still broken. Here's the passwd file: (In retrospect I should have checked the permissions of the passwd file, oops.) I have no [EMAIL PROTECTED]:/etc# cat passwd root:x:0:0:root:/root:/bin/bash daemon:x:1:1:daemon:/usr/sbin:/bin/sh bin:x:2:2:bin:/bin:/bin/sh sys:x:3:3:sys:/dev:/bin/sh sync:x:4:65534:sync:/bin:/bin/sync games:x:5:60:games:/usr/games:/bin/sh man:x:6:12:man:/var/cache/man:/bin/sh lp:x:7:7:lp:/var/spool/lpd:/bin/sh mail:x:8:8:mail:/var/mail:/bin/sh news:x:9:9:news:/var/spool/news:/bin/sh uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh proxy:x:13:13:proxy:/bin:/bin/sh www-data:x:33:33:www-data:/var/www:/bin/sh backup:x:34:34:backup:/var/backups:/bin/sh list:x:38:38:Mailing List Manager:/var/list:/bin/sh irc:x:39:39:ircd:/var/run/ircd:/bin/sh gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh nobody:x:65534:65534:nobody:/nonexistent:/bin/sh libuuid:x:100:101::/var/lib/libuuid:/bin/sh I have no [EMAIL PROTECTED]:/etc# exit During this time the chroot'd lighttpd webserver is hosting pages fine, but can't send emails. I try to restart it -- no luck. The init.d script contains chown www-data:www-data /var/run/lighttpd and fails on that line: [EMAIL PROTECTED] svn]# chroot staging/www I have no [EMAIL PROTECTED]:/# /etc/init.d/lighttpd stop chown: invalid user: `www-data:www-data' I have no [EMAIL PROTECTED]:/# /etc/init.d/lighttpd start chown: invalid user: `www-data:www-data' I have no [EMAIL PROTECTED]:/# exit I have the great idea of switching from usernames to user IDs: this solves the chown problem, but lighttpd.conf has a username. I switch to a user ID in lighttpd.conf but that doesn't work either, so I back out those changes. Note, I've made no changes to /etc/group or /etc/passwd I have no [EMAIL PROTECTED]:/# /etc/init.d/lighttpd start * Starting web server lighttpd 2008-06-30 06:17:39: (server.c.727) can't find username www-data [fail] I have no [EMAIL PROTECTED]:/# /etc/init.d/lighttpd start * Starting web server lighttpd 2008-06-30 06:18:22: (server.c.727) can't find username 33 [fail] I have no [EMAIL PROTECTED]:/# exit Also note, despite these changes, the chroot is still broken. More time passes and I try one more time: [EMAIL PROTECTED] svn]# chroot staging/www [EMAIL PROTECTED]:/# date Mon Jun 30
Re: how to install flash plugin for
On 06/29/2008 11:53 PM, Jonathan Jacobs wrote: [...] Ps. On a second note similar to the first. The reason why I am going to www.lexmark.com is to download an updated driver for my printer. I have a lex T630 printer and the box recognizes it as such. But, when I try to pick out the driver for it. The numbers do not match with what I have. I go do the site and download the latest. The box still does not have the correct numbers. Before I try lex support, I thought I would try you wonderful people lol. I don't know quite what you mean when you say the numbers do not match, but this may help you: http://search.yahoo.com/search?p=site%3Alexmark.com+T630+driverei=UTF-8fr=moz2 Click the first link. Lexmark's website is suboptimal at both searching and finding relevant information, but Yahoo does search for a living. http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:359:0:0searchLang=enos_group=DebianGNUtarget= I certainly hope this helps. BTW, I went to www.lexmark.com with both Javascript and Flash turned off. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: how to install flash plugin for iceweasel on leny amd64?
On 30 Jun 2008, at 01:02, Star Liu wrote: I installed ia32-libs, then nspluginwrapper, but it seems nothing changes, iceweasel still says no suitable plugin found for flash. thank you! please don't top post my original suggestion had one more step - install (a 32 bit) flash plugin. my AMD64 Debian isn't booted but it would be something like libflash-mozplugin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: where are __amd64 and __i386 defined?
On 30 Jun 2008, at 05:48, Star Liu wrote: I read this line in a c source file: #if defined (__sun) (defined(__i386) || defined(__amd64)) I'm wondering where are __sun __amd and 64 __i386 defined? I'd guess arch-specific C header files -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: how to install flash plugin for iceweasel on leny amd64?
yes, there is libflash-mozplugin, i have just installed it, its effect is to close iceweasel when there is a flash on the page, so i then purged it. :) does it mean this solution won't work for amd64? On Mon, Jun 30, 2008 at 4:36 PM, michael [EMAIL PROTECTED] wrote: On 30 Jun 2008, at 01:02, Star Liu wrote: I installed ia32-libs, then nspluginwrapper, but it seems nothing changes, iceweasel still says no suitable plugin found for flash. thank you! please don't top post my original suggestion had one more step - install (a 32 bit) flash plugin. my AMD64 Debian isn't booted but it would be something like libflash-mozplugin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- - Homepage: http://starliu.9966.org, about Buddha, x86_64 CPU, Debian GNU/Linux Lenny AMD64, UEFI/BIOS -
Re: how to install flash plugin for iceweasel on leny amd64?
On Mon, Jun 30, 2008 at 16:55:31 +0800, Star Liu ([EMAIL PROTECTED]) wrote: yes, there is libflash-mozplugin, i have just installed it, its effect is to close iceweasel when there is a flash on the page, so i then purged it. :) does it mean this solution won't work for amd64? On Mon, Jun 30, 2008 at 4:36 PM, michael [EMAIL PROTECTED] wrote: On 30 Jun 2008, at 01:02, Star Liu wrote: I installed ia32-libs, then nspluginwrapper, but it seems nothing changes, iceweasel still says no suitable plugin found for flash. thank you! please don't top post my original suggestion had one more step - install (a 32 bit) flash plugin. Which bit of please don't top post don't you understand? It really does make it very difficult for other people reading this thread. Also, it is best if you use plain text only. Please lose the html part. Thank you. A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? -- Bob Cox. Stoke Gifford, near Bristol, UK. Registered user #445000 with the Linux Counter - http://counter.li.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Thanks to all the devs and maintainers of Debian
+1 user staunch of Debian. -- Gérard -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Linux-image-2.6.25 won't boot - target filesystem error
I just installed linux-image-2.6.25-2 from Sid. Boot fails with a mwwage: target filesystem doesn't have bootarg This is followed by: /bin/sh: can't access tty; job control turned off 2.6.23 still boots normally. Google shows a number of people with similar problems, mainly on Ubuntu. I also found a Debian recommendation to modify /etc/fstab in order to get the file systems recognized, but I'm reluctant to do so for fear of losing the ability to boot any kernel at all. Any ideas about this one? -- Anthony Campbell - [EMAIL PROTECTED] Microsoft-free zone - Using Debian GNU/Linux http://www.acampbell.org.uk (blog, book reviews, and sceptical articles) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Linux-image-2.6.25 won't boot - target filesystem error
On Mon, Jun 30, 2008 at 10:14:02AM +0100, Anthony Campbell wrote: I just installed linux-image-2.6.25-2 from Sid. Boot fails with a mwwage: target filesystem doesn't have bootarg This is followed by: /bin/sh: can't access tty; job control turned off Mine works here, but was there any errors with dpkg when installing? Also, did you get the right one for your computer? Eg. x86 for x86 machines. I also found a Debian recommendation to modify /etc/fstab in order to get the file systems recognized, but I'm reluctant to do so for fear of losing the ability to boot any kernel at all. err... just get a rescue cd, if it won't boot, put it in the cd drive, boot it mount your linux partition open /mntp/to/linux/partition/etc/fstab And remove those lines, reboot back into your linux 2.6.23 kernel... -- Daniel Dalton http://members.iinet.net.au/~ddalton/ [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Linux-image-2.6.25 won't boot - target filesystem error
On 30 Jun 2008, Daniel Dalton wrote: On Mon, Jun 30, 2008 at 10:14:02AM +0100, Anthony Campbell wrote: I just installed linux-image-2.6.25-2 from Sid. Boot fails with a mwwage: target filesystem doesn't have bootarg This is followed by: /bin/sh: can't access tty; job control turned off Mine works here, but was there any errors with dpkg when installing? Also, did you get the right one for your computer? Eg. x86 for x86 machines. I also found a Debian recommendation to modify /etc/fstab in order to get the file systems recognized, but I'm reluctant to do so for fear of losing the ability to boot any kernel at all. err... just get a rescue cd, if it won't boot, put it in the cd drive, boot it mount your linux partition open /mntp/to/linux/partition/etc/fstab And remove those lines, reboot back into your linux 2.6.23 kernel... No error messages. I do get: aetting up linux-image-2.6.25-2-amd64 (2.6.25-6) ... Running depmod. Finding valid ramdisk creators. Using mkinitramfs-kpkg to build the ramdisk. Other valid candidates: mkinitramfs-kpkg mkinitrd.yaird The kernel is correct; I'm currently using linux-image-2.6.23-amd64. I take the point about using a rescue disk but I'm not sure of what to try for /etc/fstab. I know that a fresh installation of linux uses different syntax but I don't remember what it is or how it works. Currently I have: /dev/hdb10 / ext3errors=remount-ro 0 1 /dev/hda5 noneswapsw 0 0 proc/proc procdefaults0 0 # none /proc/bus/usb/ usbdevfs user,noauto 0 0 none /proc/bus/usb usbfs defaults 0 0 /dev/fd0/media/floppy autouser,noauto,rw 0 0 /dev/hdc/media/cdromiso9660 ro,user,noauto,unhide 0 0 /dev/hdb6 noneswapsw 0 0 /dev/hdb7 /usr/local ext3defaults0 2 /dev/hdb8 /home ext3defaults0 2 /dev/hda1/backupext3 user,defaults0 2 ~ ~ Anthony -- Anthony Campbell - [EMAIL PROTECTED] Microsoft-free zone - Using Debian GNU/Linux http://www.acampbell.org.uk (blog, book reviews, and sceptical articles) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: wireless with atheros
So all atheros cards are supported in linux? For what it's worth, I'm using a Netgear WG511T and it works great for me. It replaced some barely supported So, does this use the atheros chipset? Or how did you get it working. Since you mentioned an exact model, I might get this, because I will be able to find it easier, but would like a little more info, like, how did you get it working under linux? Just with madwifi? Thanks for all the help, greatly appreciated. (and thanks to everyone else for all the other replies) -- Daniel Dalton http://members.iinet.net.au/~ddalton/ [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Linux-image-2.6.25 won't boot - target filesystem error
On Mon, Jun 30, 2008 at 10:50:03AM +0100, Anthony Campbell wrote: On 30 Jun 2008, Daniel Dalton wrote: No error messages. I do get: aetting up linux-image-2.6.25-2-amd64 (2.6.25-6) ... Running depmod. Finding valid ramdisk creators. should be fine The kernel is correct; I'm currently using linux-image-2.6.23-amd64. indeed I take the point about using a rescue disk but I'm not sure of what to try for /etc/fstab. I know that a fresh installation of linux uses Erm, didn't you say you found this on google earlier? Isn't that how we got started talking about rescue cds? Or have I mistaken... You know you can also backup your fstab before you touch it so it is just a matter of doing this when in the rescue cd: cp /path/to/backup/fstab /etc (that will restore your backup) different syntax but I don't remember what it is or how it works. Currently I have: Don't ask me about fstab, I haven't read up on this much, perhaps others can help with this. -- Daniel Dalton http://members.iinet.net.au/~ddalton/ [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: how to install flash plugin for iceweasel on leny amd64?
In fact, I didn't do anything else, I just reply it in gmail, I don't know why it's top posted, or in html format. On Mon, Jun 30, 2008 at 5:06 PM, Bob Cox [EMAIL PROTECTED] wrote: On Mon, Jun 30, 2008 at 16:55:31 +0800, Star Liu ([EMAIL PROTECTED]) wrote: yes, there is libflash-mozplugin, i have just installed it, its effect is to close iceweasel when there is a flash on the page, so i then purged it. :) does it mean this solution won't work for amd64? On Mon, Jun 30, 2008 at 4:36 PM, michael [EMAIL PROTECTED] wrote: On 30 Jun 2008, at 01:02, Star Liu wrote: I installed ia32-libs, then nspluginwrapper, but it seems nothing changes, iceweasel still says no suitable plugin found for flash. thank you! please don't top post my original suggestion had one more step - install (a 32 bit) flash plugin. Which bit of please don't top post don't you understand? It really does make it very difficult for other people reading this thread. Also, it is best if you use plain text only. Please lose the html part. Thank you. A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? -- Bob Cox. Stoke Gifford, near Bristol, UK. Registered user #445000 with the Linux Counter - http://counter.li.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- - Homepage: http://starliu.9966.org, about Buddha, x86_64 CPU, Debian GNU/Linux Lenny AMD64, UEFI/BIOS -
Re: Linux-image-2.6.25 won't boot - target filesystem error
On 30 Jun 2008, Daniel Dalton wrote: On Mon, Jun 30, 2008 at 10:50:03AM +0100, Anthony Campbell wrote: On 30 Jun 2008, Daniel Dalton wrote: No error messages. I do get: aetting up linux-image-2.6.25-2-amd64 (2.6.25-6) ... Running depmod. Finding valid ramdisk creators. should be fine The kernel is correct; I'm currently using linux-image-2.6.23-amd64. indeed I take the point about using a rescue disk but I'm not sure of what to try for /etc/fstab. I know that a fresh installation of linux uses Erm, didn't you say you found this on google earlier? Isn't that how we got started talking about rescue cds? Or have I mistaken... You know you can also backup your fstab before you touch it so it is just a matter of doing this when in the rescue cd: cp /path/to/backup/fstab /etc (that will restore your backup) different syntax but I don't remember what it is or how it works. Currently I have: Don't ask me about fstab, I haven't read up on this much, perhaps others can help with this. Yes, I do know about rescue CDs, backing up /etc/fstab etc. But I didn't really want to go down that route unless it's necessary and I really don't know where to begin sorting this one out. None of the Goggle stuff is very helpful. I'm not at all sure that messing about with /etc/fstab would help. I don't seem to be alone with this one. There was a recent (June 21) post with almost identical errors: Begin: Running /scripts/init-bottom ... mount: No such file or directory mount: No such file or directory Target file system doesn't have /sbin/init No init found. Try passing init= bootarg. BusyBox v1.10.2 (Debian 1:1.10.2-1) built-in shell (ash) Enter 'help' for alist of built-in commands /bin/sh: can't access tty; job control off (initramfs) I have no idea where to start debugging from. I think that the problem is more about the kernel, not about the mdadm. I suppose I somehow did not comiped in the kernel something needed for finding the sATA devices, but I used the default kernel configuration and I was thinking that this should work. Morover, I cannot boot the LinuxOLD image (which was working perfectly before), since it ends in a kernel panic message. Any idea on how to boot this machine and bring back in a working condition is welcome. This is: http://www.mail-archive.com/debian-user@lists.debian.org/msg519211.html Time for a bug report, I think. Anthony -- Anthony Campbell - [EMAIL PROTECTED] Microsoft-free zone - Using Debian GNU/Linux http://www.acampbell.org.uk (blog, book reviews, and sceptical articles) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
install (k)ubuntu on external hard drives
hello i know it is possible to install linux on external usb hd's; this is fairly easy if the bios supports the BOOT FROM USB option but in older hardware this is not true and so i need to know if it may be done in another way around thank you very much -- roberto OS: GNU/Linux, Debian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: how to install flash plugin for iceweasel on leny amd64?
On Mon, Jun 30, 2008 at 2:31 AM, Star Liu [EMAIL PROTECTED] wrote: In fact, I didn't do anything else, I just reply it in gmail, I don't know why it's top posted, or in html format. On Mon, Jun 30, 2008 at 5:06 PM, Bob Cox [EMAIL PROTECTED] wrote: On Mon, Jun 30, 2008 at 16:55:31 +0800, Star Liu ([EMAIL PROTECTED]) wrote: yes, there is libflash-mozplugin, i have just installed it, its effect is to close iceweasel when there is a flash on the page, so i then purged it. :) does it mean this solution won't work for amd64? On Mon, Jun 30, 2008 at 4:36 PM, michael [EMAIL PROTECTED] wrote: On 30 Jun 2008, at 01:02, Star Liu wrote: I installed ia32-libs, then nspluginwrapper, but it seems nothing changes, iceweasel still says no suitable plugin found for flash. thank you! please don't top post my original suggestion had one more step - install (a 32 bit) flash plugin. Which bit of please don't top post don't you understand? It really does make it very difficult for other people reading this thread. Also, it is best if you use plain text only. Please lose the html part. Thank you. A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? Snipped I use gmail too and this message is neither a top post nor in html format :) Senthil -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Linux-image-2.6.25 won't boot - target filesystem error
On Mon, Jun 30, 2008 at 10:50:03 +0100, Anthony Campbell wrote: On 30 Jun 2008, Daniel Dalton wrote: On Mon, Jun 30, 2008 at 10:14:02AM +0100, Anthony Campbell wrote: I just installed linux-image-2.6.25-2 from Sid. Boot fails with a mwwage: target filesystem doesn't have bootarg This is followed by: /bin/sh: can't access tty; job control turned off [...] The kernel is correct; I'm currently using linux-image-2.6.23-amd64. I take the point about using a rescue disk but I'm not sure of what to try for /etc/fstab. I know that a fresh installation of linux uses different syntax but I don't remember what it is or how it works. Currently I have: /dev/hdb10 / ext3errors=remount-ro 0 1 /dev/hda5 noneswapsw 0 0 proc/proc procdefaults0 0 # none /proc/bus/usb/ usbdevfs user,noauto 0 0 none /proc/bus/usb usbfs defaults 0 0 /dev/fd0/media/floppy autouser,noauto,rw 0 0 /dev/hdc/media/cdromiso9660 ro,user,noauto,unhide 0 0 /dev/hdb6 noneswapsw 0 0 /dev/hdb7 /usr/local ext3defaults0 2 /dev/hdb8 /home ext3defaults0 2 /dev/hda1/backupext3 user,defaults0 2 You can use UUIDs or labels to refer to the partitions. This is robust if a newer kernel changes the device nodes (e.g. from /dev/hda to /dev/sda). You can use the blkid utility to find out the UUIDs of your partitions, or you can set your own labels with e2label (and mkswap -L for the swap partition). To give you an example, I labeled my root partition root and this is the corresponding fstab entry: LABEL=root / ext3defaults,errors=remount-ro 0 1 If you want to use UUIDs then the syntax is UUID=. You can try this with only your backup partition first to see if it works, i.e. if the 2.6.23 kernel mounts it correctly if the fstab entry refers to the label or UUID instead of /dev/hda1. The corresponding syntax for /boot/grub/menu.lst is # kopt=root=LABEL=root ro (plus other boot options that you might want to pass to the kernel) I would first try to switch to labels or UUIDs completely (including root) with 2.6.23. If you subsequently run into a problem with 2.6.25 then you may have to boot into 2.6.23 once more and change every reference in /boot/grub/device.map from /dev/hdX to /dev/sdX. (I have no idea how this works with LILO.) -- Regards,| http://users.icfo.es/Florian.Kulzer Florian | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: CPU Frequencies Don't scale independently
Hi, On Sun, 29 Jun 2008, Hakan BAYINDIR [EMAIL PROTECTED] writes: I'm running debian testing on a Intel Core2Quad Q6600 CPU with 4 gigabytes of RAM for 7 months. Until 2.6.22, the kernel was scaling each of my cores independently of each other but starting with 2.6.22, every core is running in the same frequency. While this doesn't pose any stability or performance issues, causes higher temprature and noise when I run a single threaded computing intensive job. I tracked the cause a bit. I was able to dig upto /sys/devices/system/cpu/cpuX/cpufreq/affected_cpus. This file says which CPUs should scale together. Since file is read only even to root I think it's an unconfigurable option. I also found that cpu frequencies are adjusted by cpufreq_acpi module and I cannot find any configuration related to it files in my system (with my current knowledge). The weird thing is I'm running an exact clone of this system in my office with a core2duo system which scales its cores independently. I cloned my home system to the office when I was running an Athlon64, approximately 1.5 years ago. If anybody can say what is wrong, is it the expected behavior, where should I look further, or whom I can talk to? BTW, I'm running 2.6.24-1-686-bigmem kernel prepackaged from debian testing. Did you solve your problem? I may recommend you to read files under linux/Documentation/cpu-freq directory. BTW, sending your /proc/config.gz might be helpful. Regards. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: project: wired/wireless router
On Mon, Jun 30, 2008 at 6:18 AM, Alex Samad [EMAIL PROTECTED] wrote: On Sun, Jun 29, 2008 at 11:41:58PM +0100, j t wrote: Having said that, I run openwrt on a couple of asus routers: one wl-hdd and one asus wl-500g and they have the same issue with regards there has been some changes to openwrt, the latest trunk version from the svn repo has b43 driver which lets you use 2.6 on the broadcom based routers, like asus + wrt5x's. the same is true for 2.4 but not with b43 driver. Apologies if this is starting to veer slightly offtopic. Alex, are you running current openrt svn yourself on any asus boxes at the moment? If so, what mode is your wireless running in (ap, sta, ...)? Thanks, Jaime -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: where are __amd64 and __i386 defined?
On Mon, Jun 30, 2008 at 4:37 PM, michael [EMAIL PROTECTED] wrote: On 30 Jun 2008, at 05:48, Star Liu wrote: I read this line in a c source file: #if defined (__sun) (defined(__i386) || defined(__amd64)) I'm wondering where are __sun __amd and 64 __i386 defined? I'd guess arch-specific C header files not needed. check this: $ echo | strace -f -o 1.log cpp -E -x c -dM | grep -i i386 #define __i386 1 #define __i386__ 1 #define i386 1 and no header file is opened(check it in 1.log) -- Best Regards, LI Daobing -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
wireless with Netgear WG511T
Hi, I'm looking to buy a Netgear WG511T. I see it has an atheros chipset in it, so assume linux supports it. So, does the madwifi driver support it? And, where can I find instructions on how to set it up, including installing any drivers, configuration and then of course connecting to networks. Does anyone know where this info can be found? I didn't find much with google. Thanks, -- Daniel Dalton http://members.iinet.net.au/~ddalton/ [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Linux-image-2.6.25 won't boot - target filesystem error
On Mon, Jun 30, 2008 at 10:14:02AM +0100, Anthony Campbell wrote: I just installed linux-image-2.6.25-2 from Sid. Boot fails with a mwwage: target filesystem doesn't have bootarg This is followed by: /bin/sh: can't access tty; job control turned off 2.6.23 still boots normally. Google shows a number of people with similar problems, mainly on Ubuntu. I also found a Debian recommendation to modify /etc/fstab in order to get the file systems recognized, but I'm reluctant to do so for fear of losing the ability to boot any kernel at all. Any ideas about this one? How large is your initrd? Assuming that you run lilo, you may be experiencing http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=479607 Regards, Andrei -- If you can't explain it simply, you don't understand it well enough. (Albert Einstein) signature.asc Description: Digital signature
Gigabit Notebook Adaptor for networking Debian
I have an antique Gateway Solo 1100 laptop, in mint condition, running Debian Linux. I would like to use it to administer my headless internet server (also running Debian). However, it needs an ethernet card. The Linksys network adaptors I've seen for sale in stores require you to be running Windows. At the Linksys website, I found the the Gigabit Notebook Adaptor (PCM1000) which, it says, is supported by all major operating systems. Here's the link: http://www.linksys.com/servlet/Satellite?c=L_Product_C2childpagename=US%2FLayoutcid=1124916752477pagename=Linksys%2FCommon%2FVisitorWrapperlid=5247745472B03 I am wondering if this would do the trick. I would be greatful for any insights Thanks Best Regards, Vwaju, New York City -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
desktop icons disappear and file browser doesn't work
recently, on both my etch and lenny, desktop icons often disappear and file browser doesn't work, i think it should be a known bug, though i can still operate by terminal commands, i wonder is there any easy method to restart the desktop icons display and make the file browser work? thanks! -- - Homepage: http://starliu.9966.org, about Buddha, x86_64 CPU, Debian GNU/Linux Lenny AMD64, UEFI/BIOS -
Re: Linux-image-2.6.25 won't boot - target filesystem error
On 30 Jun 2008, Andrei Popescu wrote: On Mon, Jun 30, 2008 at 10:14:02AM +0100, Anthony Campbell wrote: I just installed linux-image-2.6.25-2 from Sid. Boot fails with a mwwage: target filesystem doesn't have bootarg This is followed by: /bin/sh: can't access tty; job control turned off 2.6.23 still boots normally. Google shows a number of people with similar problems, mainly on Ubuntu. I also found a Debian recommendation to modify /etc/fstab in order to get the file systems recognized, but I'm reluctant to do so for fear of losing the ability to boot any kernel at all. Any ideas about this one? How large is your initrd? Assuming that you run lilo, you may be experiencing http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=479607 No, I'm using grub. -- Anthony Campbell - [EMAIL PROTECTED] Microsoft-free zone - Using Debian GNU/Linux http://www.acampbell.org.uk (blog, book reviews, and sceptical articles) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: wireless with atheros
Daniel Dalton: So could someone please see if they could show me an online add of an atheros pcmcia card supported by linux? Madiwif cards: http://madwifi.org/wiki/Compatibility J. -- I am no longer prepared to give you the benefit of the doubt. [Agree] [Disagree] http://www.slowlydownward.com/NODATA/data_enter2.html signature.asc Description: Digital signature
Re: desktop icons disappear and file browser doesn't work
On Mon, Jun 30, 2008 at 08:45:28PM +0800, Star Liu wrote: recently, on both my etch and lenny, desktop icons often disappear and file browser doesn't work, i think it should be a known bug, though i can still operate by terminal commands, i wonder is there any easy method to restart the desktop icons display and make the file browser work? I don't see this, what desktop? gnome? If it is gnome alt+control+back space will restart the whole of gnome... -- Daniel Dalton http://members.iinet.net.au/~ddalton/ [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Linux-image-2.6.25 won't boot - target filesystem error
On Mon, Jun 30, 2008 at 13:45:44 +0100, Anthony Campbell wrote: On 30 Jun 2008, Andrei Popescu wrote: On Mon, Jun 30, 2008 at 10:14:02AM +0100, Anthony Campbell wrote: I just installed linux-image-2.6.25-2 from Sid. Boot fails with a mwwage: target filesystem doesn't have bootarg This is followed by: /bin/sh: can't access tty; job control turned off 2.6.23 still boots normally. Google shows a number of people with similar problems, mainly on Ubuntu. I also found a Debian recommendation to modify /etc/fstab in order to get the file systems recognized, but I'm reluctant to do so for fear of losing the ability to boot any kernel at all. Any ideas about this one? How large is your initrd? Assuming that you run lilo, you may be experiencing http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=479607 No, I'm using grub. Uh-oh, speaking of initrds: I forgot that in my previous message; you should probably rebuild it if you change your fstab to labels or UUIDs. -- Regards,| http://users.icfo.es/Florian.Kulzer Florian | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
