Re: [SID] VLC : noir et bla nc et étiré
On Thu, Sep 02, 2010 at 11:16:36PM +0200, luc schimpf wrote : Le 02/09/2010 18:38, Aurelien a écrit : On Thu, Sep 02, 2010 at 03:22:25PM +0200, Guy Roussin wrote : Hum, déjà SID c'est pas tous les jours simples, donc experimental, pour l'instant, je vais tenter d'éviter. A la limite, je préfère compiler mon propre noyau 2.6.35, ça, je sais faire ! Rien ne t'obliges à désinstaller ton 2.6.32 ... Il te suffira au démarrage de grub de choisir la 2.6.32 pour retomber sur ta conf. qui marche (presque). Dans ce cas, le risque ne me parait pas bien grand et le test ne va te prendre que quelques minutes. Hum, oui, je sais. Je pensais au fait d'ajouter experimental à mes sources, en fait. Mais en effet, je pourrais me contenter de prendre le .deb et l'installer. Tu peux t'économiser cette peine, j'ai le même problème que toi sur le même type de matériel et je viens d'installer le 2.6.35 d'experimental sans résultat... Arf. Bon, bah j'allais justement redémarrer sur un nouveau noyau... Je vais quand même tenter le coup. Tu n'as pas trouvé de piste, non plus ? A plus tard. -- Aurélien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100903070317.ge2...@sebkhachott.net
Re: [SID] VLC : noir et blanc et étiré
Le 03/09/2010 09:03, Aurelien a écrit : Tu peux t'économiser cette peine, j'ai le même problème que toi sur le même type de matériel et je viens d'installer le 2.6.35 d'experimental sans résultat... Arf. Bon, bah j'allais justement redémarrer sur un nouveau noyau... Je vais quand même tenter le coup. Tu n'as pas trouvé de piste, non plus ? A plus tard. Non pas de piste pour le moment, il faut dire que c'est un vieux portable qu'utilise ma fille de trois ans pour du ludo-éducatif, je ne me suis repenché sur la question que suite à la lecture de ce fil... Luc -- Luc Schimpf www.au-ptit-bon-air.eu -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c80a5b1.6010...@free.fr
Re: [SID] VLC : noir et bla nc et étiré
On Fri, Sep 03, 2010 at 09:37:21AM +0200, luc schimpf wrote : Le 03/09/2010 09:03, Aurelien a écrit : Tu peux t'économiser cette peine, j'ai le même problème que toi sur le même type de matériel et je viens d'installer le 2.6.35 d'experimental sans résultat... Arf. Bon, bah j'allais justement redémarrer sur un nouveau noyau... Je vais quand même tenter le coup. Tu n'as pas trouvé de piste, non plus ? A plus tard. Non pas de piste pour le moment, il faut dire que c'est un vieux portable qu'utilise ma fille de trois ans pour du ludo-éducatif, je ne me suis repenché sur la question que suite à la lecture de ce fil... OK. Bon, j'ai tenté l'install du noyau à jour, mais je n'aurais pas dû car je n'avais pas encore rebooté depuis le passage en mode UUID. Enfin, c'est ce que je crois compte tenu des galères qui sont tombées derrière (lilo qui ne trouve pas root, puis aucune des partitions n'est montées). Bref, toujours est-il que je n'arrive pas à booter sur ce nouveau noyau, il se plaint du manque d'un fichier init Je vais retenter, mais pour l'instant, ça a plutôt tendance à m'emmener vers d'autres problèmes plus que d'en résoudre ! -- Aurélien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100903092559.ga2...@sebkhachott.net
passage aux UUID (was: Re: [SID] VLC : noir et blanc et étiré)
On Fri, Sep 03, 2010 at 11:25:59AM +0200, Aurelien wrote : On Fri, Sep 03, 2010 at 09:37:21AM +0200, luc schimpf wrote : Le 03/09/2010 09:03, Aurelien a écrit : Tu peux t'économiser cette peine, j'ai le même problème que toi sur le même type de matériel et je viens d'installer le 2.6.35 d'experimental sans résultat... Arf. Bon, bah j'allais justement redémarrer sur un nouveau noyau... Je vais quand même tenter le coup. Tu n'as pas trouvé de piste, non plus ? A plus tard. Non pas de piste pour le moment, il faut dire que c'est un vieux portable qu'utilise ma fille de trois ans pour du ludo-éducatif, je ne me suis repenché sur la question que suite à la lecture de ce fil... OK. Bon, j'ai tenté l'install du noyau à jour, mais je n'aurais pas dû car je n'avais pas encore rebooté depuis le passage en mode UUID. Enfin, c'est ce que je crois compte tenu des galères qui sont tombées derrière (lilo qui ne trouve pas root, puis aucune des partitions n'est montées). Bref, toujours est-il que je n'arrive pas à booter sur ce nouveau noyau, il se plaint du manque d'un fichier init Bon, en fait, le pb vient du fait que le disque usuellement appelé sda est appelé sdb quand je boote sur ce nouveau noyau. Du coup, les lignes dans fstab ne correspondent à rien. Est-ce que l'utilisation des UUID pourrait me sortir de cette impasse ? Et si oui, pourquoi ? (parce que, d'après ce que j'ai compris, les UUID sont juste un lien de /dev/disk/by-uuid/UUID vers /dev/sdXX correspondant, donc si c'est mis dans le désordre, comment fait-il pour s'en sortir ?). Merci d'avance. -- Aurélien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100903094324.ga2...@sebkhachott.net
[HS] changer en tant user son password via NIS
Bonjour, désolé pour ce HS. ce n'a pas de rapport avec debian. mais bcp d'entre vous administrent des parcs de machines et donc connaissent NIS. Mon labo a acheté un cluster. dessus il y a oscar et cenOS. Je me retrouve admin de ce cluster. Je commence donc à regarder comment on ajoute un utilisateur...bon ça pas de souci. adduser pouet passwd pouet make -C /var/yp maintenant je me dis que mon utilisateur pouet veut changer tout seul comme un grand sont password. je me logue en tant que pouet et fait un passwd. et mon changement de mot de passe n'est pas pris en compte. Le support me dit vous devez faire un make -C /var/yp pour mettre à jour la base NIS...c'est vrai ça marche. Mais je trouve ça débile: à chaque fois qu'un user veut changer son mot de passe, il doit appeler l'admin. ou sinon une tache cron doit tourner...mais bon je trouve ça pas propre. Qu'en est-il sous debian ? J'aimerai vos avis éclairés... Merci d'avance Guillaume -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/i5qg7j$m9...@dough.gmane.org
Re: passage aux UUID (was: Re: [SID] VLC : noir et blanc et étiré)
Le vendredi 3 septembre 2010 à 11:43:24, Aurelien a écrit : […] Bon, en fait, le pb vient du fait que le disque usuellement appelé sda est appelé sdb quand je boote sur ce nouveau noyau. Du coup, les lignes dans fstab ne correspondent à rien. Est-ce que l'utilisation des UUID pourrait me sortir de cette impasse ? Oui. Et si oui, pourquoi ? (parce que, d'après ce que j'ai compris, les UUID sont juste un lien de /dev/disk/by-uuid/UUID vers /dev/sdXX correspondant, donc si c'est mis dans le désordre, comment fait-il pour s'en sortir ?). Ton fstab (et lilo/grub…) contiendra les UUID. sda et sdb n’apparaissent plus dans les fichiers de conf. Que UUIDxxx1 pointe vers sda ou sdb, ça ne change rien, c’est toujours UUIDxxx1, et c’est toujours le même disque puisque l’UUID est constant et calculé pour le disque, par pour son nom local (sda/sdb), autrement dit, le nom sda/sdb n’intervient pas. -- Sylvain Sauvage -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201009031252.26925.sylvain.l.sauv...@free.fr
Re: passage aux UUID (was : Re: [SID] VLC : noir et blanc et étiré)
On Fri, Sep 03, 2010 at 12:52:26PM +0200, Sylvain L. Sauvage wrote : Le vendredi 3 septembre 2010 à 11:43:24, Aurelien a écrit : […] Bon, en fait, le pb vient du fait que le disque usuellement appelé sda est appelé sdb quand je boote sur ce nouveau noyau. Du coup, les lignes dans fstab ne correspondent à rien. Est-ce que l'utilisation des UUID pourrait me sortir de cette impasse ? Oui. Et si oui, pourquoi ? (parce que, d'après ce que j'ai compris, les UUID sont juste un lien de /dev/disk/by-uuid/UUID vers /dev/sdXX correspondant, donc si c'est mis dans le désordre, comment fait-il pour s'en sortir ?). Ton fstab (et lilo/grub…) contiendra les UUID. sda et sdb n’apparaissent plus dans les fichiers de conf. OK, en effet. Mais en l'occurence, j'ai été obligé de commenter toutes les lignes avec les UUID et de remettre les anciennes car lilo ne s'en sortait pas, pas plus que le montage des partitions derrière (première fois que cela me fait ça, cela dit). Que UUIDxxx1 pointe vers sda ou sdb, ça ne change rien, c’est toujours UUIDxxx1, et c’est toujours le même disque puisque l’UUID est constant et calculé pour le disque, par pour son nom local (sda/sdb), autrement dit, le nom sda/sdb n’intervient pas. OK. Je retenterai tout à l'heure de remettre les fichiers avec les UUID, et on verra si ça veut bien fonctionner. Je vous tiens au courant. -- Aurélien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100903115830.gb2...@sebkhachott.net
Re: [HS] changer en tant user son password via NIS
giggzounet wrote: Bonjour, Bonjour désolé pour ce HS. ce n'a pas de rapport avec debian. mais bcp d'entre vous administrent des parcs de machines et donc connaissent NIS. ... Le support me dit vous devez faire un make -C /var/yp pour mettre à jour la base NIS...c'est vrai ça marche. Mais je trouve ça débile: à chaque fois qu'un user veut changer son mot de passe, il doit appeler l'admin. ou sinon une tache cron doit tourner...mais bon je trouve ça pas propre. Qu'en est-il sous debian ? J'aimerai vos avis éclairés... Sur Debian ou autre : yppasswd A+ -- | M LE BRISSHOM/DO/MGS/INF/BAS Email: pascal.le.b...@shom.fr | | Pascal 13,rue du Chatellier CS92803 Tel : (33) 02 98 22 17 41 | | 29228 BREST CEDEX 2 Fax : (33) 02 98 22 03 66 | -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c80e332.9010...@shom.fr
Re: [HS] changer en tant user son password via NIS
Le vendredi 03 septembre 2010 à 11:47 +0200, giggzounet a écrit : Bonjour, désolé pour ce HS. ce n'a pas de rapport avec debian. mais bcp d'entre vous administrent des parcs de machines et donc connaissent NIS. Mon labo a acheté un cluster. dessus il y a oscar et cenOS. Je me retrouve admin de ce cluster. Je commence donc à regarder comment on ajoute un utilisateur...bon ça pas de souci. adduser pouet passwd pouet make -C /var/yp maintenant je me dis que mon utilisateur pouet veut changer tout seul comme un grand sont password. je me logue en tant que pouet et fait un passwd. De mémoire, il y a une commande yppasswd pour changer le mot de passe nis. et mon changement de mot de passe n'est pas pris en compte. Le support C'est quoi ce support ? me dit vous devez faire un make -C /var/yp pour mettre à jour la base NIS...c'est vrai ça marche. Mais je trouve ça débile: à chaque fois qu'un user veut changer son mot de passe, il doit appeler l'admin. ou sinon une tache cron doit tourner...mais bon je trouve ça pas propre. Qu'en est-il sous debian ? J'aimerai vos avis éclairés... Merci d'avance Guillaume -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/1283515880.15510.1.ca...@cone
Re: [HS] changer en tant user son password via NIS
Re, On Fri, Sep 03, 2010 at 11:47:31AM +0200, giggzounet wrote: désolé pour ce HS. ce n'a pas de rapport avec debian. mais bcp d'entre vous administrent des parcs de machines et donc connaissent NIS. Connaît-on jamais NIS ? :-) maintenant je me dis que mon utilisateur pouet veut changer tout seul comme un grand sont password. je me logue en tant que pouet et fait un passwd. et mon changement de mot de passe n'est pas pris en compte. Il faut que yppasswdd tourne sur le serveur NIS et que le user change son password par la commande yppasswd (sur n'importe quel client NIS, soit dit en passant, pas qu'en local). Je viens de le faire pour être sûr en te répondant et c'est instantanément pris en compte sur une autre machine. Le support me dit vous devez faire un make -C /var/yp pour mettre à jour la base NIS...c'est vrai ça marche. En utilisant les commandes classiques, oui. Faut dire à NIS que la situation a changé et qu'il doit régénérer ses cartes. (Ceci dit, je remarque pendant mon test qu'en ajoutant un user avec les commandes classiques --- directement sur le serveur NIS par hypothèse --- l'appel à make se fait tout seul... Ça semble nouveau depuis lenny (?) parce qu'en etch, j'avais mis l'appel à make dans le script adduser.local qui est exécuté à chaque ajout d'utilisateur s'il existe. Mais ça ne semble plus nécessaire.) Mais je trouve ça débile: à chaque fois qu'un user veut changer son mot de passe, il doit appeler l'admin. D'autres aussi puisqu'on a écrit le démon yppasswdd :-) Hih, A+ -- JFS. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100903121355.ga4...@hermes.jfs.dt
Re: [HS] changer en tant user son password via NIS
Le 03/09/2010 14:11, Julien a écrit : Le vendredi 03 septembre 2010 à 11:47 +0200, giggzounet a écrit : Bonjour, désolé pour ce HS. ce n'a pas de rapport avec debian. mais bcp d'entre vous administrent des parcs de machines et donc connaissent NIS. Mon labo a acheté un cluster. dessus il y a oscar et cenOS. Je me retrouve admin de ce cluster. Je commence donc à regarder comment on ajoute un utilisateur...bon ça pas de souci. adduser pouet passwd pouet make -C /var/yp maintenant je me dis que mon utilisateur pouet veut changer tout seul comme un grand sont password. je me logue en tant que pouet et fait un passwd. De mémoire, il y a une commande yppasswd pour changer le mot de passe nis. ok. merci pour vos 2 réponses. la commande yppasswd fonctionne parfaitement (si yppasswdd tourne) et mon changement de mot de passe n'est pas pris en compte. Le support C'est quoi ce support ? un support technique pas très doué (le gars chez qui on a commandé le cluster)...la debian.user.french est comme d'habitude bcp plus efficace et en passant j'apprends des trucs. Merci à tous les 2 Guillaume -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/i5qpoh$ui...@dough.gmane.org
Re: [HS] changer en tant user son password via NIS
Le 03/09/2010 14:13, JF Straeten a écrit : Re, On Fri, Sep 03, 2010 at 11:47:31AM +0200, giggzounet wrote: désolé pour ce HS. ce n'a pas de rapport avec debian. mais bcp d'entre vous administrent des parcs de machines et donc connaissent NIS. Connaît-on jamais NIS ? :-) maintenant je me dis que mon utilisateur pouet veut changer tout seul comme un grand sont password. je me logue en tant que pouet et fait un passwd. et mon changement de mot de passe n'est pas pris en compte. Il faut que yppasswdd tourne sur le serveur NIS et que le user change son password par la commande yppasswd (sur n'importe quel client NIS, soit dit en passant, pas qu'en local). Je viens de le faire pour être sûr en te répondant et c'est instantanément pris en compte sur une autre machine. Le support me dit vous devez faire un make -C /var/yp pour mettre à jour la base NIS...c'est vrai ça marche. En utilisant les commandes classiques, oui. Faut dire à NIS que la situation a changé et qu'il doit régénérer ses cartes. (Ceci dit, je remarque pendant mon test qu'en ajoutant un user avec les commandes classiques --- directement sur le serveur NIS par hypothèse --- l'appel à make se fait tout seul... Ça semble nouveau depuis lenny (?) parce qu'en etch, j'avais mis l'appel à make dans le script adduser.local qui est exécuté à chaque ajout d'utilisateur s'il existe. Mais ça ne semble plus nécessaire.) intéressant! il est où ce script adduser.local ??? Mais je trouve ça débile: à chaque fois qu'un user veut changer son mot de passe, il doit appeler l'admin. D'autres aussi puisqu'on a écrit le démon yppasswdd :-) :) merci -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/i5qptt$vb...@dough.gmane.org
Re: [HS] changer en tant user son password via NIS
On Fri, Sep 03, 2010 at 11:47:31AM CEST, giggzounet giggzou...@gmail.com said: Bonjour, désolé pour ce HS. ce n'a pas de rapport avec debian. mais bcp d'entre vous administrent des parcs de machines et donc connaissent NIS. Mon labo a acheté un cluster. dessus il y a oscar et cenOS. Je me retrouve admin de ce cluster. Je commence donc à regarder comment on ajoute un utilisateur...bon ça pas de souci. adduser pouet passwd pouet make -C /var/yp maintenant je me dis que mon utilisateur pouet veut changer tout seul comme un grand sont password. je me logue en tant que pouet et fait un passwd. et mon changement de mot de passe n'est pas pris en compte. Le support me dit vous devez faire un make -C /var/yp pour mettre à jour la base NIS...c'est vrai ça marche. Mais je trouve ça débile: à chaque fois qu'un user veut changer son mot de passe, il doit appeler l'admin. ou sinon une tache cron doit tourner...mais bon je trouve ça pas propre. Qu'en est-il sous debian ? J'aimerai vos avis éclairés... Merci d'avance Guillaume ça fait des années que je n'ai pas fait de NIS, mais à l'époque (dans les années 1990) la commande pour changer son mot de passe NIS était yppasswd. -- Erwan -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100903131906.ge27...@trusted-logic.com
Re: [HS] changer en tant user son password via NIS
Re, On Fri, Sep 03, 2010 at 02:33:01PM +0200, giggzounet wrote: [...] Ça semble nouveau depuis lenny (?) parce qu'en etch, j'avais mis l'appel à make dans le script adduser.local qui est exécuté à chaque ajout d'utilisateur s'il existe. Mais ça ne semble plus nécessaire.) intéressant! il est où ce script adduser.local ??? Tu le crées dans /usr/local/sbin ;-) Ici, y avait bêtement ça dedans : oda:~# cat /usr/local/sbin/adduser.local #!/bin/bash # # echo -e \nI: Execution de $0 : echo -e I: (Arguments passes : $@)\n echo -e I: Rafraichissement des cartes NIS :\n make -C /var/yp Mais on y met ce qu'on veut. Il est appelé avec les arguments suivants : nom du compte id du compte id du groupe rep home du user C'est ce que montre la ligne : echo -e I: (Arguments passes : $@)\n Exemple d'exécution : I: Execution de /usr/local/sbin/adduser.local : I: (Arguments passes : tempo 1006 1014 /home/tempo) I: Rafraichissement des cartes NIS : make: entrant dans le répertoire « /var/yp » make[1]: entrant dans le répertoire « /var/yp/jfsdt » make[1]: Rien à faire pour « all ». make[1]: quittant le répertoire « /var/yp/jfsdt » make: quittant le répertoire « /var/yp » Il y a possibilité aussi d'un deluser.local qui est appelé à la destruction d'un compte. (Ici, j'avais un lien deluser.local sur adduser.local pour rafraîchir aussi les maps.) cf. man adduser : Si le fichier /usr/local/sbin/adduser.local existe, il est exécuté une fois que l'utilisateur a été configuré, de façon à réaliser des opérations propres au système. Les paramètres passés à adduser.local sont : nom_utilisateur uid gid répertoire_personnel (Idem dans man deluser). Hih, A+ -- JFS. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100903132106.ga6...@hermes.jfs.dt
Re: [HS] changer en tant user son password via NIS
Le 03/09/2010 15:21, JF Straeten a écrit : Re, On Fri, Sep 03, 2010 at 02:33:01PM +0200, giggzounet wrote: [...] Ça semble nouveau depuis lenny (?) parce qu'en etch, j'avais mis l'appel à make dans le script adduser.local qui est exécuté à chaque ajout d'utilisateur s'il existe. Mais ça ne semble plus nécessaire.) intéressant! il est où ce script adduser.local ??? Tu le crées dans /usr/local/sbin ;-) Ici, y avait bêtement ça dedans : oda:~# cat /usr/local/sbin/adduser.local #!/bin/bash # # echo -e \nI: Execution de $0 : echo -e I: (Arguments passes : $@)\n echo -e I: Rafraichissement des cartes NIS :\n make -C /var/yp Mais on y met ce qu'on veut. Il est appelé avec les arguments suivants : nom du compte id du compte id du groupe rep home du user C'est ce que montre la ligne : echo -e I: (Arguments passes : $@)\n Exemple d'exécution : I: Execution de /usr/local/sbin/adduser.local : I: (Arguments passes : tempo 1006 1014 /home/tempo) I: Rafraichissement des cartes NIS : make: entrant dans le répertoire « /var/yp » make[1]: entrant dans le répertoire « /var/yp/jfsdt » make[1]: Rien à faire pour « all ». make[1]: quittant le répertoire « /var/yp/jfsdt » make: quittant le répertoire « /var/yp » Il y a possibilité aussi d'un deluser.local qui est appelé à la destruction d'un compte. (Ici, j'avais un lien deluser.local sur adduser.local pour rafraîchir aussi les maps.) cf. man adduser : Si le fichier /usr/local/sbin/adduser.local existe, il est exécuté une fois que l'utilisateur a été configuré, de façon à réaliser des opérations propres au système. Les paramètres passés à adduser.local sont : nom_utilisateur uid gid répertoire_personnel (Idem dans man deluser). Hih, A+ merki bien. je note tout ça! -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/i5qthj$er...@dough.gmane.org
SMTP local avec exim4
Bonjour, J'utilise mon client de messagerie thunderbird avec un tunnel de connexion ssh vers un serveur dédié. J'avais pris l'habitude d'utiliser ce réglage car il m'arrivait assez souvent d'utiliser des connexions wifi publiques non-sécurisé. Et je me dis que je pourrais utiliser ce serveur dédié comme serveur smtp pour envoyer mes mails. Je ne voudrais pas ouvrir le serveur smtp sur internet, mais uniquement qu'il soit en mesure de relayer les messages depuis localhost (c'est ainsi que qu'est considérée la provenance les paquets envoyés par un tunnel ssh). J'utilise déjà exim4 qui est surtout utilisé par la commande mail de php, elle fonctionne très bien, j'ai donc essayé de réglé dans mon client thunderbird un smtp local, étrangement thunderbird ne génère pas d'erreur lorsque j'utilise ce smtp local mais bien entendu les mails envoyés ne sont jamais reçu, et d'ailleurs un coup d'œil dans les logs de exim4 ne mentionnent aucune trace des mails que j'ai envoyé. J'ai donc jeté un œil au fichier /etc/exim4/update-exim4.conf.conf pour voir, ainsi qu'au man update-exim4.conf pour essayé d'en savoir un peu plus sur les variables, mais ça reste très superficiel dans la façon d'aborder les choses je trouve. Voici le contenu du fichier. dc_eximconfig_configtype='internet' dc_other_hostnames='none' dc_local_interfaces='127.0.0.1' dc_readhost='HOSTNAME' #(volontairement masqué) dc_relay_domains='none' dc_minimaldns='false' dc_relay_nets='none' dc_smarthost='HOSTNAME' #(volontairement masqué) CFILEMODE='644' dc_use_split_config='false' dc_hide_mailname='true' dc_mailname_in_oh='true' dc_localdelivery='mail_spool' J'ai pensé mettre 127.0.0.1 dans la variable dc_relay_nets, mais d'après le man (si je l'ai bien compris) les relais sont toujours permis depuis 127.0.0.1. Donc pour le coup je ne sais pas si ça sera utile de mettre ça, et je préfère demander conseil avant de casser mon serveur de mail (qui est en prod, donc faut quand même que je fasse attention). Voilà, si quelqu'un pouvait m'apporter un conseil utile Merci d'avance Christophe -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c816836.3030...@goldenfish.info
Re: problem z NAT
On Friday, 3 of September 2010, Mariusz Kruk wrote: Ma szansę działać. Ale: [...] 2) To rozwiązanie nie działa. Tak to jest, jak się zaczyna pisać, potem przemyśli, a na koniec zmieni zdanie. :-D -- Kruk@ -\ | }- epsilon.eu.org | http:// -/ | | -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009031034.55079.mariusz.k...@epsilon.eu.org
Re: problem z NAT
On Fri, Sep 03, 2010 at 10:10:54AM +0200, Mariusz Kruk wrote: On Thursday, 2 of September 2010, Miroslaw Kwasniak wrote: sewer: echo 1 WWW_LOCAL /etc/iproute2/rt_tables ip rule add from all fwmark 1 table WWW_LOCAL ip route add default via $IP_BRAMA dev eth0 table WWW_LOCAL iptables -I OUTPUT -t mangle -d $LOCAL_NET -p tcp --sport 80 -j MARK --set-mark 1 Ma szansę działać. Ale: 1) Jest IMHO bardziej zawiłe niż rozwiązanie ze SNAT (i w dwu miejscach, więc łatwiej coś przeoczyć). (i może być trudniejsze do zaimplementowania, jeśli na serwerze masz coś innego niż normalny linux - na przykład entkę, albo jakiegoś embedded) Jest zawiłe, ale chyba jedyne jak nie chcesz zmieniać innych ustawień serwera (bo ma inne usługi, które w lanie ma obsługiwać bezpośrednio). W innym przypadku ładniejszym rozwiązaniem jest, aby serwer wszystko routował via brama. 2) To rozwiązanie nie działa. W tablicy local masz wpis do lokalnej sieci bezpośrednio. Jest jak jest, ale działanie sprawdziłem ;) : Pakiety wychodziły z serwera z docelowym MAC bramy, a lokalny host nawiązał połączenie z serwerem via brama. U mnie wpis do lokalnej sieci bezpośrednio jest w tablicy main, a nie w local. Jeżeli masz inaczej, to nie wiem skąd się to wzięło, bo ja raczej przy tym nie grzebałem ;) A kolejność tablic jest taka: $ ip rule s 0: from all lookup local 32765: from all fwmark 0x1 lookup WWW_LOCAL 32766: from all lookup main 32767: from all lookup default -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100903103702.ga8...@infrared.zind.ikem.pwr.wroc.pl
Re: problem z NAT
On Friday, 3 of September 2010, Miroslaw Kwasniak wrote: Ma szansę działać. Ale: 1) Jest IMHO bardziej zawiłe niż rozwiązanie ze SNAT (i w dwu miejscach, więc łatwiej coś przeoczyć). (i może być trudniejsze do zaimplementowania, jeśli na serwerze masz coś innego niż normalny linux - na przykład entkę, albo jakiegoś embedded) Jest zawiłe, ale chyba jedyne jak nie chcesz zmieniać innych ustawień serwera (bo ma inne usługi, które w lanie ma obsługiwać bezpośrednio). W czym problem zrobić SNAT tylko na pakiety z sieci wewnętrznej na port 80 na zewnętrzny adres? 2) To rozwiązanie nie działa. W tablicy local masz wpis do lokalnej sieci bezpośrednio. Jest jak jest, ale działanie sprawdziłem ;) : Pakiety wychodziły z serwera z docelowym MAC bramy, a lokalny host nawiązał połączenie z serwerem via brama. Łomatko. Też sprawdziłem, tylko popatrzyłem nie na te pakiety i mi się MAC- adresy nie zgodziły. Działa, działa. U mnie wpis do lokalnej sieci bezpośrednio jest w tablicy main, a nie w local. Jeżeli masz inaczej, to nie wiem skąd się to wzięło, bo ja raczej przy tym nie grzebałem ;) W local też są :-) -- /\-\/\-\/\-\/\-\/\-\/\-\/\ \ k...@epsilon.eu.org / / http://epsilon.eu.org/ \ \/-/\/-/\/-/\/-/\/-/\/-/\/ -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009031326.25333.mariusz.k...@epsilon.eu.org
Re: Ventanita pequeña de KWin
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 El 03/09/10 07:17, jEsuSdA 8) escribió: Prueba a reiniciar el gestor de ventanas a ver si desaparece. Abre una consola y pon: kwin --replace o a cambiar de gestor de ventanas metacity --replace A lo mejor es cosa de KWIN. Nada. Ni con ésas. No hace nada, sólo descuadran las ventanas, y aparece la misma misteriosa ventana. Tiene que ver con la bandeja de sistema, que no hay otra cosa que hace ese efecto. No hay otra. - -- Slds. de Santiago José López Borrazás. -BEGIN PGP SIGNATURE- iQIVAwUBTICZsYFZAuZYtJmMAQoJpQ/+K2+xN+S6+KOKZIwwWXsbPxDpn0xfYFxz IqS1b+ZmcVrDW7/peCGVWZP1pzsfqvobA8VoPlM/vcjPjKw+ZZpnrAkwQHwC8LKV 5FS3menCjQd3XBgT/2shgYtkFIjJjHeU27THCpY6gmeGxog70/624YSG5MpJs3rO lKrUPHdnPgAF4LnW90d3zFV5L7LfcZYhdnp/llysx5S0/ko6AdDC4RjulSYrfH2q pt3/oZ4GITuhiSp/R+/qBHZmk/JvDMfKyF0JhlutgiCmlZ3OKSToXZqMit8Kfxf4 oV+efn9q4o7t3nTU+QtkHHHvpVYiMIR0/6/Ynb968HBsUYHLYhJtHz1NoQ4vbJ5m YSqhm9ASIwUCI6oPDXY9V6WDkW62Vf6ANbt5fyofUWUJXxy9+TYaane+iG+uUN6c xp7l6hihPIzHBU3CMfUCGng3+Rci/tKKCHUUW7IBg5uLb7JCQ/19hRoSaokPTSZf tVGU6q5Uw4p+pmRRKRUuSHtUFqX681hyGs8m90q4Q1U0DLwsNF/RaRSso9IUWPgz 81bTn2Xu6ZUPEkOGMuCUND4yp34NWl4zmWiSlSUpPJaWJU5iGV75uH/367pKl0rA NlmLzC5QdDK6X6HEXHi6AkvEEQRPbCBuAOjVSN7/Pkeq58rL6xlGvHMibStn9zXD YxFlNDK+U/Y= =WaQx -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c8099b1.3050...@sjlopezb.yahoo.es
Re: Consulta sobre placa red usb RJ45
On Fri, 3 Sep 2010, insulae wrote: hola gente estoy viendo que en mercadolibre ( o ebay) venden unas placas de red usb rj45, vienen con chipset realtek aparentemente, alguien a probado si funciona bien en Linux?. Necesito hacer balanceo con un par de ADSL y no consigo mother con 6 o mas ranuras pci/pcie y de funcionar sería una opcion muy barata comparandola con un SWITCH VLAN o las placas PCIE o PCI de 2 puertos. Teoricamente corren a 25mbps nada mas pero seria mas que suficiente para controlar los ADSL. Juraría que estas cosas usan el módulo [1]'usbnet'. Para que te funcionen tienene que estar soportados por el mismo, algo que con los datos proporcionados no podemos adivinar. Saludos --- Angel [1]http://www.linux-usb.org/usbnet/
Re: Consulta sobre placa red usb RJ45
El día Friday 03 September 2010 10:47:45, angeld dijo: [...] placas de red usb rj45, vienen con chipset realtek aparentemente, alguien ha probado si funciona bien en Linux?. Juraría que estas cosas usan el módulo [1]'usbnet'. Nononono. 'usbnet' sirve para utilizar un cable USB como interfaz física para meter TCP/IP por encima. Es decir, cuando usas un cable USB de host a host en vez de un cable ethernet con RJ45. Es bastante típico para conectarte a cacharros: la Zaurus, algunos teléfonos con Linux, o mi Papyre con OpenInkpot. Hay cacharro como al que se refiere Insuae, que tiran automáticamente con el módulo dm9601 y compañía. Pero sin saber el modelo específico no se puede saber. Un saludo, -- Iván Sánchez Ortega i...@sanchezortega.es Un ordenador no es una televisión ni un microondas: es una herramienta compleja. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009031121.28182.i...@sanchezortega.es
Re: Consulta sobre placa red usb RJ45
Genial, gracias por las respuestas, ahora... si no entendi mal, el USB/RJ45 esta soportado en Linux y lo que faltaría ver es si el chipset de la placa es compatible con Linux, esto es así?, despues de buscar en 1000 ventas encontre uno que dice que el chipset es el RTL8150 que buscandolo en los modulos econtre: ./kernel/drivers/net/usb/rtl8150.ko Alguien me confirma que andan correctamente? Saludos y gracias Juan -- Juan Matias Granda http://www.insulae.com.ar GPG FINGERPRINT:459C 4A2D 330C CB8C 0C44 0C3A 572C CBCA 5457 508B -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktik0iagnneozucm-hd_irnlwbamsnsztzlshr...@mail.gmail.com
Re: Consulta sobre placa red usb RJ45
On Fri, Sep 03, 2010 at 09:55:55AM -0300, insulae wrote: Genial, gracias por las respuestas, ahora... si no entendi mal, el USB/RJ45 esta soportado en Linux y lo que faltaría ver es si el chipset de la placa es compatible con Linux, esto es así?, despues de buscar en 1000 ventas encontre uno que dice que el chipset es el RTL8150 que buscandolo en los modulos econtre: ./kernel/drivers/net/usb/rtl8150.ko Alguien me confirma que andan correctamente? Saludos y gracias Juan Yo tengo una con el driver dm9601 y funciona correctamente. Bastante lenta, comprada por cuatro duros en dealextreme. -- Juan Matias Granda http://www.insulae.com.ar GPG FINGERPRINT:459C 4A2D 330C CB8C 0C44 0C3A 572C CBCA 5457 508B -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktik0iagnneozucm-hd_irnlwbamsnsztzlshr...@mail.gmail.com pgpqvhNMt2FF2.pgp Description: PGP signature
direcciones mac y squid
Salud2s colegas le escrbo con una duda que tengo respecto a mi servidor proxy que tiene montado como S.O Debian Lenny y como software para proxy Squid 2.7 con su modulo de ARP para anclar usuarios con su respectivas direcciones MAC. Pero este squid sirve a mi red LAN y todas las demas subredes la cual administro. Sin envargo noto que este modulo trabaja solo en mi red lan, ejemplo de esto ejecuto este comando desde mi red lan, luego el otro desde una de mi subred me da el siguiente error. Pregunto hay que instalar algun paquete mas para esto funcione correctamente. Grcias Red Lan # arp 10.22.4.1 Address HWtype HWaddress Flags Mask Iface 10.22.4.1ether 00:15:f2:0e:6b:70 C eth0 Subred # arp 10.22.8.6 10.22.8.6 (10.22.8.6) -- no entry -- _ / Joan Manuel López \ | Administrador de Red| | Phone: (0121) 383421| | Phone Home: (0121) 382851 | | Phone: (0121) 383465 Ext. 314 | | Jabber: joanman...@jb.elecgtm.une.cu| | Jabber: joanmanue...@yahoo.es | | Linux User# 490001 | \ Web: http://blog-admin.elecgtm.une.cu / - \ \ .--. |o_o | |:_/ | // \ \ (| | ) /'\_ _/`\ \___)=(___/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/50173.10.22.4.1.1283510132.squir...@webmail.elecgtm.une.cu
Re: [¿Solución?] Virtualizando con KVM una impresora USB
On Sat, 31 Jul 2010, AngelD wrote: Tengo una magnífica impresora (Konica Minolta Magicolor 2500W) que no funciona en Linux bajo ningún concepto. Para solucionarlo he optado por instalar una máquina virtual con Windows para que haga de servidor de impresión para esta impresora. Una vez instalada la máquina virtual con KVM, le paso la impresora, enchufada en un puerto USB de la máquina host, por medio del parámetro '-usb -usbdevice host:132b:2045'. En la máquina virtual, la impresora es detectada e instalada correctamente, pero a la hora de imprimir, da un [1]casque, que no soy capaz de solucionar. He probado a virtualizar el usb por dirección (-usb -usbdevice host:2.4), pero con los mismos resultados. ¿Alguien tiene experiencia con un problema similar?. Se admiten ideas. [1]http://img266.imageshack.us/img266/9228/kvmusberror.png No es la solución que me hubiera gustado, pero funciona. Niños intenten no hacer esto en sus casas: Saludos --- Angel http://www.e-ghost.deusto.es/mediawiki/index.php?title=Receta_112
Re: direcciones mac y squid
On Fri, 3 Sep 2010, Joan Manuel wrote: Salud2s colegas le escrbo con una duda que tengo respecto a mi servidor proxy que tiene montado como S.O Debian Lenny y como software para proxy Squid 2.7 con su modulo de ARP para anclar usuarios con su respectivas direcciones MAC. Pero este squid sirve a mi red LAN y todas las demas subredes la cual administro. Sin envargo noto que este modulo trabaja solo en mi red lan, ejemplo de esto ejecuto este comando desde mi red lan, luego el otro desde una de mi subred me da el siguiente error. Pregunto hay que instalar algun paquete mas para esto funcione correctamente. Grcias Red Lan # arp 10.22.4.1 Address HWtype HWaddress Flags Mask Iface 10.22.4.1ether 00:15:f2:0e:6b:70 C eth0 Subred # arp 10.22.8.6 10.22.8.6 (10.22.8.6) -- no entry ¿Te suena de algo las capas [1]OSI?. Porque las direcciones MAC que buscas están dentro de la capa [2]dos, mientras que la IP se encuentra en la capa [3]tres. Si utilizas un 'hub' o 'switch', capa dos. Si utilizas un 'router', capa tres. Son esto te intento decir que la propia división de subredes que tienes, te impide conseguir la MAC de sispositivos que no estén en tu misma subred. Saludos --- Angel [1]http://es.wikipedia.org/wiki/Modelo_OSI [2]http://es.wikipedia.org/wiki/Capa_de_enlace_de_datos [3]http://es.wikipedia.org/wiki/Capa_de_red
Re: Usar Kernel 2.6.30.7 en Debian Lenny
Buen dia...Ok gracias, actualizaré de esta manera que recomiendas. SAludos. 2010/9/2 mariodebian mariodeb...@gmail.com El mié, 01-09-2010 a las 18:37 -0500, Goku. escribió: Hola de nuevo, es recomendable correr esta version de kernel 2.6.30.7 en debian lenny?? ...baje el paquete .deb con sus headers. de una pagina. Suponiendo que lo pueda usarcreen que de esta manera, ya pueda soportar el driver de la tarjeta inalambrica Broadcom BCM4312 que viene con las Dell 1525?? El kernel que trae por defecto debian lenny, o bueno al menos el que instale yo, no tiene el modulo soportado y logré instalarlo con tutoriales. Me gustaria evitar este paso y asi tambien, tener la distro con un kernel mas actual. Gracias. La forma más oficial de actualizar el kernel de lenny (y otros paquetes) es usar backports. Ahora mismo en lenny tienes el 2.6.32: http://packages.debian.org/search?keywords=linux-imagesearchon=namessection=allsuite=lenny-backports Estas son las instrucciones para añadir el repo de backports: http://www.backports.org/dokuwiki/doku.php?id=instructions -- Saludos -- http://mariodebian.com
Re: Problemas con Frostwire.
Buenos dias,,,gracias por contestar...si, antes de lanzar la pregunta a la lista, busco la solucion. (generalmente en Google). no he aprendido a buscar bien jeje. No, no tengo configurado PulseAudioesta es la razon de que se vaya el sonido al abrir frostwire o youtube??. 2010/9/2 angeld ang...@froga.net On Wed, 1 Sep 2010, Goku. wrote: Buenas tardes a todos. Tengo algunos problemas con Frostwire, lo instale en Debian Lenny (auunque tambien pasa en kubuntu 10). La version de Java es la ultima. y ya vi que esta corriendo bien. El problema es este, a veces se traba la lista de reproduccion, parpadea y se mantiene de arriba a abajo entre las canciones. En definitiva, que el problema es de la aplicación. ¿Has pensado en hacerles esta pregunta en sus foros?. Porque esta lista no parece la más adecuada. Otro problema si abro Frostwire, ya no puedo usar youtube por ejemplo. y Viceversa. tengo que reiniciar la maquina, porque se va el sonido. ¿Reiniciar la máquina al quedarte sin sonido?. ¿Tienes configurado pulseaudio?. Saludos --- Angel
Re: Problemas con Frostwire.
On Fri, 3 Sep 2010, Goku. wrote: 2010/9/2 angeld ang...@froga.net On Wed, 1 Sep 2010, Goku. wrote: Buenas tardes a todos. Tengo algunos problemas con Frostwire, lo instale en Debian Lenny (auunque tambien pasa en kubuntu 10). La version de Java es la ultima. y ya vi que esta corriendo bien. El problema es este, a veces se traba la lista de reproduccion, parpadea y se mantiene de arriba a abajo entre las canciones. En definitiva, que el problema es de la aplicación. ¿Has pensado en hacerles esta pregunta en sus foros?. Porque esta lista no parece la más adecuada. Otro problema si abro Frostwire, ya no puedo usar youtube por ejemplo. y Viceversa. tengo que reiniciar la maquina, porque se va el sonido. ¿Reiniciar la máquina al quedarte sin sonido?. ¿Tienes configurado pulseaudio?. Buenos dias,,,gracias por contestar...si, antes de lanzar la pregunta a la lista, busco la solucion. (generalmente en Google). no he aprendido a buscar bien jeje. ¿? ¿Tan mal me explico?. Te sugiero que PREGUNTES EN LOS FOROS DE FROSTWIRE. No, no tengo configurado PulseAudioesta es la razon de que se vaya el sonido al abrir frostwire o youtube??. Hay boletos de que uno acapare el audio, y que por eso el otro no suene. Si utilizas Squeeze, instala pulseaudio. Saludos --- Angel P.D. Intenta no realizar Top-posting.
Re: Dónde está...la base sql...
/etc/mysql/my.cnf es la cosa Lo de copiar el contenido del directorio solo te va a funcionar si el otro server esta corriendo la misma version de la que le hiciste la copia (ojo que si funciona y yo mismo lo he probado) o al menos una version lo mas cercana posible, pero lo mas limpio que puedes hacer es el dump que te dijeron.. basicamente con cualquier cliente lo puedes hacer... lo mismo desde la consola (cliente mas extremo para un usuario end) que de otro... en mi caso me encanta el phpmyadmin dado que hago cositas para la web y bueno.. lo mio primero y siempre tengo un navegador a mano pues... con phpmyadmin que ademas esta incluido como un paquete debian lo puedes hacer de forma muy intuitiva.
Re: Actualizar siempre
Lo que sí debo reconocer, es que Debian es tan estable, que he hecho verdaderos desastres, y nunca me llevó más de una hora volver a dejar todo como estaba. == Amen!!! Jjajaja es lo mas estable que he probado nunca... tambien he metido mis cascos de vez en cuando y casi siempre..(mas del 90% de las veces) puedo arreglar los cascazos.
openvpn host to host
Buenas: Quiero hacer una configuracion host to host con openvpn, bien basica.. Son dos maquinas virtuales, con dos placas en nat. cat server.conf dev tun proto udp ifconfig 10.8.0.1 10.8.0.2 secret secret.key port 1194 user nobody group nobody complzo ping 15 verb 4 stationx:/etc/openvpn# cat client.conf remote 172.16.31.128 port 1194 dev tun tunmtu 1500 ifconfig 10.8.0.2 10.8.0.1 secret /etc/openvpn/secret.key complzo ping 10 verb 4 mute 10 stationx:/etc/openvpn# Pero al querer inicializar la configuracion me tira el siguiente error. serverx:/etc/openvpn# openvpn --config /etc/openvpn/server.conf Options error: Unrecognized option or missing parameter(s) in /etc/openvpn/server.conf:3: ifconfig 10.8.0.1 (2.1_rc11) Use --help for more information. serverx:/etc/openvpn# clientex:/etc/openvpn# /etc/init.d/openvpn start Starting virtual private network daemon: server tun0 failed! clientex:/etc/openvpn# No entiendo que tiene mal la linea del ifconfig, he leido por muchas paginas y todas tienen esa linea asi. Saludos
Re: openvpn host to host (SOLUCIONADO)
Tenia caracteres no visibles en el archivo.. por eso el error :S gracias :) On Fri, Sep 3, 2010 at 6:59 PM, Rino Rondan villadalm...@gmail.com wrote: Buenas: Quiero hacer una configuracion host to host con openvpn, bien basica.. Son dos maquinas virtuales, con dos placas en nat. cat server.conf dev tun proto udp ifconfig 10.8.0.1 10.8.0.2 secret secret.key port 1194 user nobody group nobody complzo ping 15 verb 4 stationx:/etc/openvpn# cat client.conf remote 172.16.31.128 port 1194 dev tun tunmtu 1500 ifconfig 10.8.0.2 10.8.0.1 secret /etc/openvpn/secret.key complzo ping 10 verb 4 mute 10 stationx:/etc/openvpn# Pero al querer inicializar la configuracion me tira el siguiente error. serverx:/etc/openvpn# openvpn --config /etc/openvpn/server.conf Options error: Unrecognized option or missing parameter(s) in /etc/openvpn/server.conf:3: ifconfig 10.8.0.1 (2.1_rc11) Use --help for more information. serverx:/etc/openvpn# clientex:/etc/openvpn# /etc/init.d/openvpn start Starting virtual private network daemon: server tun0 failed! clientex:/etc/openvpn# No entiendo que tiene mal la linea del ifconfig, he leido por muchas paginas y todas tienen esa linea asi. Saludos -- Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! ^^^Transcripcion de la epoca ^^^ http://www.rinorondan.com.ar http://counter.li.org Linux User - #517918
Re: Consulta sobre placa red usb RJ45
El día 2 de septiembre de 2010 22:05, insulae insu...@gmail.com escribió: hola gente estoy viendo que en mercadolibre ( o ebay) venden unas placas de red usb rj45, vienen con chipset realtek aparentemente, alguien a probado si funciona bien en Linux?. Necesito hacer balanceo con un par de ADSL y no consigo mother con 6 o mas ranuras pci/pcie y de funcionar sería una opcion muy barata comparandola con un SWITCH VLAN o las placas PCIE o PCI de 2 puertos. Teoricamente corren a 25mbps nada mas pero seria mas que suficiente para controlar los ADSL. Saludos -- Juan Matias Granda Hola Quizá llega un poco tarde mi respuesta. Y posiblemente sea Off Topic a tu pregunta. ¿No has checado las motherboards de caracter industrial? Yo tengo un appliance, pequeñito, de 5 puertos ethernet de portwell http://www.portwell.com/products/products.asp#ipc que corre Debian de maravilla (Excepto por un problemilla con el driver de video VIA, solucionado genericamente) saludos -- Hector -- El Pic no pudo Iniciar correctamente. Inserte el disco de arranque y presione cualquier pin para continuar... Linux Registered User #467500 http://counter.li.org/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktinrhmskgom9jsd7_9auvxtuokfmj2epemc2g...@mail.gmail.com
hardw antiguo
mande una pregunta a debian-proj...@lists.debian.org y me dieron esta direccion bueno tengo un ordenador viejo de 16bits con 1giga y yo pense en usarlo como servidor dns el problema es el software que tengo etch tenia woody pero lo perdi e igualmente no se podria podriais darme consejo porfa? no quiero tirar el ordenador saludos
Re: athens digital week
Καλησπέρα, Και φέτος θα διεξαχθή στις αρχές Οκτωβρίου (6-10) το Athens Digital Week. Ένα απ' τα panel συζητήσεων που έχει οργανωθει για το Open-Source section θα έχει θέμα Linux Distributions. Μέχρι στιγμής έχουν κληθεί να συμμετάσχουν Fedora, Ubuntu, Gentoo, Arch και φυσικά οι διοργανωτές θα ήθελαν να υπάρχει και εκπρόσωπος του Debian. Οπότε όποιος θέλει λοιπόν να εκπροσωπήσει το Debian στο panel ας σηκώσει το χέρι :) -- Nikos Roussos http://autoverse.net/ http://gr.linkedin.com/in/comzeradd Χμ, δεν βλέπω πολλά χέρια στην τάξη. Ας σηκώσω το δικό μου λοιπόν. Αν και κάποιο άλλο παιδάκι συγκινηθεί ακόμα καλλίτερα :) Μανώλης -- To UNSUBSCRIBE, email to debian-user-greek-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/b4b1fbcbe4e7046e73609cf422067543.squir...@webmail.quad-nrg.net
Re: ATI και compiz
On 09/03/2010 02:29 AM, Klearchos-Angelos Gkountras wrote: με τον 2.6.32-trunk-amd64 και καρτα γραφικων VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics On 09/03/2010 02:16 AM, Alex Ballas wrote: On 09/01/2010 02:48 PM, Klearchos-Angelos Gkountras wrote: το προβλημα ειναι το configuration On 09/01/2010 02:46 PM, George Kiagiadakis wrote: 2010/9/1 Klearchos-Angelos Gkountras gatof...@gmail.com: προσπαθω να βαλω το compiz αλλα θελω τον ανοιχτο driver που υποστηριζετε απο τον .33 out-of-the-box καμια ιδεα για να μπει ? Και ποιο είναι το πρόβλημα? # aptitude install compiz Τουλάχιστον πες μας τι κάρτα γραφικών έχεις, με τι chipset και με ποιον kernel δοκιμάζεις. Grafe an boreis tis apadiseis twn post apo katw kai oxi apo panw, opws akrivws sou ypodeiksan. Oso gia tin ati, bale kapoion new kernel. Den exei nohma na to palepseis me ton 32 an odws i OTB ypostiriksi arxizei apo ton 33 kai meta. Tapini mou apopsi einai na katebaseis kapoion apo tous latest kernels pou dinei to experimental, kratwntas fysika kai ton palio se periptwsh provlimatos me ton new. -- Alex Ballas -- To UNSUBSCRIBE, email to debian-user-greek-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c8151df.7020...@ballas.org
Re: ATI και compiz
On 09/03/2010 11:06 PM, George Kiagiadakis wrote: 2010/9/3 Alex Ballas a...@ballas.org: On 09/03/2010 02:29 AM, Klearchos-Angelos Gkountras wrote: με τον 2.6.32-trunk-amd64 και καρτα γραφικων VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics On 09/03/2010 02:16 AM, Alex Ballas wrote: On 09/01/2010 02:48 PM, Klearchos-Angelos Gkountras wrote: το προβλημα ειναι το configuration On 09/01/2010 02:46 PM, George Kiagiadakis wrote: 2010/9/1 Klearchos-Angelos Gkountras gatof...@gmail.com: προσπαθω να βαλω το compiz αλλα θελω τον ανοιχτο driver που υποστηριζετε απο τον .33 out-of-the-box καμια ιδεα για να μπει ? Και ποιο είναι το πρόβλημα? # aptitude install compiz Τουλάχιστον πες μας τι κάρτα γραφικών έχεις, με τι chipset και με ποιον kernel δοκιμάζεις. Grafe an boreis tis apadiseis twn post apo katw kai oxi apo panw, opws akrivws sou ypodeiksan. Oso gia tin ati, bale kapoion new kernel. Den exei nohma na to palepseis me ton 32 an odws i OTB ypostiriksi arxizei apo ton 33 kai meta. Tapini mou apopsi einai na katebaseis kapoion apo tous latest kernels pou dinei to experimental, kratwntas fysika kai ton palio se periptwsh provlimatos me ton new. O 2.6.32-5-arch exei backported olous tous aparaithtous drivers apo ton .33 kai einai o default kernel tou squeeze. O 2.6.32-trunk-arch (oso ki an mperdeyei to onoma tou) einai arketa palioteros kai kala 8a kaneis na ton anaba8miseis. πως θα τον αναβαθμισω ? -- Klearchos-Angelos Gkountras http://jemadux.wordpress.com -- To UNSUBSCRIBE, email to debian-user-greek-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c81570c.1030...@gmail.com
Re: ATI και compiz
2010/9/3 Klearchos-Angelos Gkountras gatof...@gmail.com: On 09/03/2010 11:06 PM, George Kiagiadakis wrote: 2010/9/3 Alex Ballas a...@ballas.org: On 09/03/2010 02:29 AM, Klearchos-Angelos Gkountras wrote: με τον 2.6.32-trunk-amd64 και καρτα γραφικων VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics On 09/03/2010 02:16 AM, Alex Ballas wrote: On 09/01/2010 02:48 PM, Klearchos-Angelos Gkountras wrote: το προβλημα ειναι το configuration On 09/01/2010 02:46 PM, George Kiagiadakis wrote: 2010/9/1 Klearchos-Angelos Gkountras gatof...@gmail.com: προσπαθω να βαλω το compiz αλλα θελω τον ανοιχτο driver που υποστηριζετε απο τον .33 out-of-the-box καμια ιδεα για να μπει ? Και ποιο είναι το πρόβλημα? # aptitude install compiz Τουλάχιστον πες μας τι κάρτα γραφικών έχεις, με τι chipset και με ποιον kernel δοκιμάζεις. Grafe an boreis tis apadiseis twn post apo katw kai oxi apo panw, opws akrivws sou ypodeiksan. Oso gia tin ati, bale kapoion new kernel. Den exei nohma na to palepseis me ton 32 an odws i OTB ypostiriksi arxizei apo ton 33 kai meta. Tapini mou apopsi einai na katebaseis kapoion apo tous latest kernels pou dinei to experimental, kratwntas fysika kai ton palio se periptwsh provlimatos me ton new. O 2.6.32-5-arch exei backported olous tous aparaithtous drivers apo ton .33 kai einai o default kernel tou squeeze. O 2.6.32-trunk-arch (oso ki an mperdeyei to onoma tou) einai arketa palioteros kai kala 8a kaneis na ton anaba8miseis. πως θα τον αναβαθμισω ? # aptitude install linux-image-2.6.32-5-amd64 -- To UNSUBSCRIBE, email to debian-user-greek-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktindxd+2tcbwurnlozwroebdegxkbyr5gauyk...@mail.gmail.com
RES: OFF: Virtualbox + Guest Multicore
Ola Leonardo, Vlw pela dica, vou pesquisar por la Tb. Obrigado. [.]'s Serial -Mensagem original- De: Leonardo Carneiro [mailto:chesterma...@gmail.com] Enviada em: Thursday, September 02, 2010 10:27 PM Para: Serial Cc: DUP Assunto: Re: OFF: Virtualbox + Guest Multicore Oi de novo Serial. De minha parte, infelizmente as idéias esgotaram =S. Sugiro que vc pergunte na lista do virtualbox (vbox-users-commun...@lists.sourceforge.net - https://lists.sourceforge.net/lists/listinfo/vbox-users-community), da qual participo. A lista também é bem ativa e conta com alguns desenvolvedores do projeto. Boa sorte! 2010/9/2 Serial skr...@gmail.com: Pessoal boa noite, Alguém tem idéia desse problema que possa me ajudar? Fiz alguns testes com VM em Linux e funciona a manipulação de processadores, porém no Windows Server, seja ele 2003 ou 2008, não funciona, o gerenciador de processos lista apenas um CPU, mesmo com o VirtualBox Guest instalado. Vlw [.]'s Serial -Mensagem original- De: Leonardo Carneiro [mailto:chesterma...@gmail.com] Enviada em: Tuesday, August 31, 2010 11:28 PM Para: DUP Assunto: Re: OFF: Virtualbox + Guest Multicore Isso com certeza é estranho Serial. O seu processador definitivamente suporta as extensões de virtualização (é o VMX na linha de flags, no cpuinfo). Eu lí no manual que existe alguns settings no vbox que se alteradas depois da instalação do guest, essas não vão surtir efeito, mas somente com guest windows. Estou sem pc agora pra procurar (to enviando do celular), mas tenho como checar isso amanha no trampo. Se for viável pra vc testar, seria interessante criar uma nova VM já com essas configurações que te passei, e só depois de configurada instalar o SO. Foi assim que deu certo pra mim. Amanhã dou mais um update nesse assunto. 2010/8/31 Serial skr...@gmail.com: Boa noite amigo, Executei o comando com as propriedades que me listou como exemplo, e também não deu certo. O Taskmanager do Windows Server, ainda reconhece apenas um processador. O resultado do comando top, no host, aponta os quatros núcleos e as opção na BIOS conforme descritos, também estão ativos. O servidor é um SuperMicro (não me lembro exatamente o modelo) mas é Server de pequeno porte, HD’s Sata e etc. Como teste também tentei com o Ubuntu 9.04 – Jaunty 64bits, mesmo cenário, mesmo problema. Veja o resultado do comando cat /proc/cpuinfo: processor: 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X3330 @ 2.66GHz stepping : 10 cpu MHz : 2667.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 0 cpu cores: 4 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu: yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm tpr_shadow vnmi flexpriority bogomips : 5320.09 clflush size : 64 power management: processor: 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X3330 @ 2.66GHz stepping : 10 cpu MHz : 2667.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 1 cpu cores: 4 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu: yes fpu_exception : yes cpuid level : 13 wp : Yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm tpr_shadow vnmi flexpriority bogomips : 5320.12 clflush size : 64 power management: processor: 2 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X3330 @ 2.66GHz stepping : 10 cpu MHz : 2660.049 cache size : 3072 KB physical id : 0 siblings : 4 core id
Re: nome da rede em cliente DHCP
2010/9/2 José Figueiredo escreveu: quando vc configura uma interface como iface eth0 inet dhcp, as diretivas que vem depois são ignoradas - e o são porque tudo deve vir pelo DHCP. Pode ser isso, mas não achei isso escrito em nenhum lugar. no servidor DHCP vc deve informar então qual o servidor DNS do seu domínio. O controlador do domínio é que irá informar o sufixo da rede. Caso vc não tenha um servidor DNS então vc informa o sufixo meu.dominio.br no arquivo /etc/hosts - inclui uma nova linha assim: 200.221.x.y maquina maquina.meu.dominio.br Eu ganho um servidor DNS pelo DHCP que está funcionando. Só não ganho a informação do nome da rede. Por exemplo minha máquina é meupc.dominio.br. Eu quero acessar pc_do_lado.dominio.br somente pelo nome da maquina, tipo ssh pc_do_lado para não ter que ficar escrevendo o nome do domínio toda hora. Deve haver alguma forma de configurar isso localmente, sobrepondo a (falta de) configuração do DHCP. Eu não tenho acesso aos servidores DHCP. -- Bruno Schneider http://www.dcc.ufla.br/~bruno/ -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktik5rortrj4caagkqjseek4-codorgjtod4kz...@mail.gmail.com
Resize de disco sem desligar sistema
Pessoal, bom dia pra todo mundo =) Tenho duas máquinas virtuais em um provedor de serviços de internet. Acontece que ele veio particionado de modo que o / aloca todo disco, não havendo outras partições para alocarmos os dados. Eu preciso separar uma partição para o /home, pois irei replica-lo entre as máquinas. O problema: O provedor não fornece nenhuma forma de acessar a máquina com ela desligada, e não realiza o resize do disco! Acredito que não há como, mas, por via das dúvidas: Alguém sabe me indicar alguma forma de fazer resize do disco para criar a outra partição sem desligar o sistema operacional?
Re: OFF: Virtualbox + Guest Multicore
Peraí ... Se eu entendí direito, o seu host é Windows Server ?!?!? Fábio Rabelo
Re: OFF: Virtualbox + Guest Multicore
Nao amigo, eh Debian 5 x86. O guest eh Windows Server 2008. Em 3 de setembro de 2010 10:27, Fábio Rabelo fa...@fabiorabelo.wiki.brescreveu: Peraí ... Se eu entendí direito, o seu host é Windows Server ?!?!? Fábio Rabelo -- [.]´s ..:: S.e.r.i.a.L ::..
Re: Resize de disco sem desligar sistema
Olá Thiago, Sugestão: crie um loop device e monte-o como home. Para sincronizar a partição basta sincronizar o arquivão do loop device, pode usar o rsync. Abraço Gilberto Em 3 de setembro de 2010 09:36, Thiago Henrique cont...@thiagohenrique.com.br escreveu: Pessoal, bom dia pra todo mundo =) Tenho duas máquinas virtuais em um provedor de serviços de internet. Acontece que ele veio particionado de modo que o / aloca todo disco, não havendo outras partições para alocarmos os dados. Eu preciso separar uma partição para o /home, pois irei replica-lo entre as máquinas. O problema: O provedor não fornece nenhuma forma de acessar a máquina com ela desligada, e não realiza o resize do disco! Acredito que não há como, mas, por via das dúvidas: Alguém sabe me indicar alguma forma de fazer resize do disco para criar a outra partição sem desligar o sistema operacional?
Ajuda com Bind
Bom dia pessoal, estou enfrentando alguns problemas com Bind aqui na rede interna, o problema é o seguinte montar um servidor dns com o bind bem simples, vou postar as configurações abaixo, ele está funcionando normalmente, o que ocorre é que as estações linux encontram os endereços normalmente, porém as estações windows simplesmente não os enxergam por exemplo: No Linux: pizo...@magicbox:~$ ping admin.develop.datahealth.com.br PING admin.develop.datahealth.com.br.datahealth.com.br (192.168.2.10) 56(84) bytes of data. 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=1 ttl=64 time=12.8 ms 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=2 ttl=64 time=1.65 ms 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=3 ttl=64 time=1.63 ms No Windows: ele simplesmente diz que o servidor ou caminho não encontrado Alguém já passou por problemas semelhante? Segue a configuração do bind $ORIGIN . $TTL 3600 ; 1 hour datahealth.com.br IN SOA urizen.datahealth.com.br. hostmaster.datahealth.com.br. ( 2010040806 ; serial 3600 ; refresh (1 hour) 900; retry (15 minutes) 604800 ; expire (1 week) 3600 ; minimum (1 hour) ) NS urizen.datahealth.com.br. $ORIGIN datahealth.com.br. urizen A 192.168.2.1 www A 189.126.116.52 develop A 192.168.2.10 admin A 189.126.116.52 server A 192.168.2.1 svn A 192.168.2.212 teste A 189.126.116.16 vpn A 192.168.2.213 xen A 192.168.2.211 *.develop.datahealth.com.br A 192.168.2.10 *.teste.datahealth.com.br A 189.126.116.16 *.admin.datahealth.com.br A 189.126.116.52 * A 189.126.116.52 Eduardo Pizorno -- Software livre sim, trabalho gratuito não.
Re: Ajuda com Bind
Boa tarde ... Me desculpe, mas este problema não tem nada a ver com Debian ou Linux, trata-se de algum problema na configuração das suas estações Windows . Fábio Rabelo Em 3 de setembro de 2010 12:24, Eduardo Pizorno pizo...@gmail.comescreveu: Bom dia pessoal, estou enfrentando alguns problemas com Bind aqui na rede interna, o problema é o seguinte montar um servidor dns com o bind bem simples, vou postar as configurações abaixo, ele está funcionando normalmente, o que ocorre é que as estações linux encontram os endereços normalmente, porém as estações windows simplesmente não os enxergam por exemplo: No Linux: pizo...@magicbox:~$ ping admin.develop.datahealth.com.br PING admin.develop.datahealth.com.br.datahealth.com.br (192.168.2.10) 56(84) bytes of data. 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=1 ttl=64 time=12.8 ms 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=2 ttl=64 time=1.65 ms 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=3 ttl=64 time=1.63 ms No Windows: ele simplesmente diz que o servidor ou caminho não encontrado Alguém já passou por problemas semelhante? Segue a configuração do bind $ORIGIN . $TTL 3600 ; 1 hour datahealth.com.br IN SOA urizen.datahealth.com.br. hostmaster.datahealth.com.br. ( 2010040806 ; serial 3600 ; refresh (1 hour) 900; retry (15 minutes) 604800 ; expire (1 week) 3600 ; minimum (1 hour) ) NS urizen.datahealth.com.br. $ORIGIN datahealth.com.br. urizen A 192.168.2.1 www A 189.126.116.52 develop A 192.168.2.10 admin A 189.126.116.52 server A 192.168.2.1 svn A 192.168.2.212 teste A 189.126.116.16 vpn A 192.168.2.213 xen A 192.168.2.211 *.develop.datahealth.com.br A 192.168.2.10 *.teste.datahealth.com.br A 189.126.116.16 *.admin.datahealth.com.br A 189.126.116.52 * A 189.126.116.52 Eduardo Pizorno -- Software livre sim, trabalho gratuito não.
Re: Ajuda com Bind
Bem só gostaria de uma opinião se o erro é com o bind ou nãoe se for alguma dica de como resolver... Em 3 de setembro de 2010 12:33, Fábio Rabelo fa...@fabiorabelo.wiki.brescreveu: Boa tarde ... Me desculpe, mas este problema não tem nada a ver com Debian ou Linux, trata-se de algum problema na configuração das suas estações Windows . Fábio Rabelo Em 3 de setembro de 2010 12:24, Eduardo Pizorno pizo...@gmail.comescreveu: Bom dia pessoal, estou enfrentando alguns problemas com Bind aqui na rede interna, o problema é o seguinte montar um servidor dns com o bind bem simples, vou postar as configurações abaixo, ele está funcionando normalmente, o que ocorre é que as estações linux encontram os endereços normalmente, porém as estações windows simplesmente não os enxergam por exemplo: No Linux: pizo...@magicbox:~$ ping admin.develop.datahealth.com.br PING admin.develop.datahealth.com.br.datahealth.com.br (192.168.2.10) 56(84) bytes of data. 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=1 ttl=64 time=12.8 ms 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=2 ttl=64 time=1.65 ms 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=3 ttl=64 time=1.63 ms No Windows: ele simplesmente diz que o servidor ou caminho não encontrado Alguém já passou por problemas semelhante? Segue a configuração do bind $ORIGIN . $TTL 3600 ; 1 hour datahealth.com.br IN SOA urizen.datahealth.com.br. hostmaster.datahealth.com.br. ( 2010040806 ; serial 3600 ; refresh (1 hour) 900; retry (15 minutes) 604800 ; expire (1 week) 3600 ; minimum (1 hour) ) NS urizen.datahealth.com.br. $ORIGIN datahealth.com.br. urizen A 192.168.2.1 www A 189.126.116.52 develop A 192.168.2.10 admin A 189.126.116.52 server A 192.168.2.1 svn A 192.168.2.212 teste A 189.126.116.16 vpn A 192.168.2.213 xen A 192.168.2.211 *.develop.datahealth.com.br A 192.168.2.10 *.teste.datahealth.com.br A 189.126.116.16 *.admin.datahealth.com.br A 189.126.116.52 * A 189.126.116.52 Eduardo Pizorno -- Software livre sim, trabalho gratuito não. -- Software livre sim, trabalho gratuito não.
Re: Ajuda com Bind
Não existe dns para Linux ou dns para Windows ou mesmo dns para MAC , existe apenas dns ! Se uma estação rodando Linux e apontada para o seu bind está resolvendo nomes corretamente, então todas as estações TEM que poder resolver nomes corretamente, a não se que haja algum erro de configuração na estação Fábio Rabelo Em 3 de setembro de 2010 12:35, Eduardo Pizorno pizo...@gmail.comescreveu: Bem só gostaria de uma opinião se o erro é com o bind ou nãoe se for alguma dica de como resolver... Em 3 de setembro de 2010 12:33, Fábio Rabelo fa...@fabiorabelo.wiki.brescreveu: Boa tarde ... Me desculpe, mas este problema não tem nada a ver com Debian ou Linux, trata-se de algum problema na configuração das suas estações Windows . Fábio Rabelo Em 3 de setembro de 2010 12:24, Eduardo Pizorno pizo...@gmail.comescreveu: Bom dia pessoal, estou enfrentando alguns problemas com Bind aqui na rede interna, o problema é o seguinte montar um servidor dns com o bind bem simples, vou postar as configurações abaixo, ele está funcionando normalmente, o que ocorre é que as estações linux encontram os endereços normalmente, porém as estações windows simplesmente não os enxergam por exemplo: No Linux: pizo...@magicbox:~$ ping admin.develop.datahealth.com.br PING admin.develop.datahealth.com.br.datahealth.com.br (192.168.2.10) 56(84) bytes of data. 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=1 ttl=64 time=12.8 ms 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=2 ttl=64 time=1.65 ms 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=3 ttl=64 time=1.63 ms No Windows: ele simplesmente diz que o servidor ou caminho não encontrado Alguém já passou por problemas semelhante? Segue a configuração do bind $ORIGIN . $TTL 3600 ; 1 hour datahealth.com.br IN SOA urizen.datahealth.com.br. hostmaster.datahealth.com.br. ( 2010040806 ; serial 3600 ; refresh (1 hour) 900; retry (15 minutes) 604800 ; expire (1 week) 3600 ; minimum (1 hour) ) NS urizen.datahealth.com.br. $ORIGIN datahealth.com.br. urizen A 192.168.2.1 www A 189.126.116.52 develop A 192.168.2.10 admin A 189.126.116.52 server A 192.168.2.1 svn A 192.168.2.212 teste A 189.126.116.16 vpn A 192.168.2.213 xen A 192.168.2.211 *.develop.datahealth.com.br A 192.168.2.10 *.teste.datahealth.com.br A 189.126.116.16 *.admin.datahealth.com.br A 189.126.116.52 * A 189.126.116.52 Eduardo Pizorno -- Software livre sim, trabalho gratuito não. -- Software livre sim, trabalho gratuito não.
Re: Ajuda com Bind
Esse é o grande nó da questão, então se o roteamento está perfeito com as estações linux, a configuração do bind está correta. Em 3 de setembro de 2010 13:05, Fábio Rabelo madt...@gmail.com escreveu: Não existe dns para Linux ou dns para Windows ou mesmo dns para MAC , existe apenas dns ! Se uma estação rodando Linux e apontada para o seu bind está resolvendo nomes corretamente, então todas as estações TEM que poder resolver nomes corretamente, a não se que haja algum erro de configuração na estação Fábio Rabelo Em 3 de setembro de 2010 12:35, Eduardo Pizorno pizo...@gmail.comescreveu: Bem só gostaria de uma opinião se o erro é com o bind ou nãoe se for alguma dica de como resolver... Em 3 de setembro de 2010 12:33, Fábio Rabelo fa...@fabiorabelo.wiki.brescreveu: Boa tarde ... Me desculpe, mas este problema não tem nada a ver com Debian ou Linux, trata-se de algum problema na configuração das suas estações Windows . Fábio Rabelo Em 3 de setembro de 2010 12:24, Eduardo Pizorno pizo...@gmail.comescreveu: Bom dia pessoal, estou enfrentando alguns problemas com Bind aqui na rede interna, o problema é o seguinte montar um servidor dns com o bind bem simples, vou postar as configurações abaixo, ele está funcionando normalmente, o que ocorre é que as estações linux encontram os endereços normalmente, porém as estações windows simplesmente não os enxergam por exemplo: No Linux: pizo...@magicbox:~$ ping admin.develop.datahealth.com.br PING admin.develop.datahealth.com.br.datahealth.com.br (192.168.2.10) 56(84) bytes of data. 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=1 ttl=64 time=12.8 ms 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=2 ttl=64 time=1.65 ms 64 bytes from develop.datahealth.com.br (192.168.2.10): icmp_seq=3 ttl=64 time=1.63 ms No Windows: ele simplesmente diz que o servidor ou caminho não encontrado Alguém já passou por problemas semelhante? Segue a configuração do bind $ORIGIN . $TTL 3600 ; 1 hour datahealth.com.br IN SOA urizen.datahealth.com.br. hostmaster.datahealth.com.br. ( 2010040806 ; serial 3600 ; refresh (1 hour) 900; retry (15 minutes) 604800 ; expire (1 week) 3600 ; minimum (1 hour) ) NS urizen.datahealth.com.br. $ORIGIN datahealth.com.br. urizen A 192.168.2.1 www A 189.126.116.52 develop A 192.168.2.10 admin A 189.126.116.52 server A 192.168.2.1 svn A 192.168.2.212 teste A 189.126.116.16 vpn A 192.168.2.213 xen A 192.168.2.211 *.develop.datahealth.com.br A 192.168.2.10 *.teste.datahealth.com.br A 189.126.116.16 *.admin.datahealth.com.br A 189.126.116.52 * A 189.126.116.52 Eduardo Pizorno -- Software livre sim, trabalho gratuito não. -- Software livre sim, trabalho gratuito não. -- Software livre sim, trabalho gratuito não.
Re: nome da rede em cliente DHCP
Em Fri, 3 Sep 2010 09:22:26 -0300 Bruno Schneider boschnei...@gmail.com escreveu: Deve haver alguma forma de configurar isso localmente, sobrepondo a (falta de) configuração do DHCP. Eu não tenho acesso aos servidores DHCP. Olá, Bruno. Se você usa o arquivo /etc/dhcp3/dhclient.conf, experimente ativar nele a diretiva: supersede domain-search domain.tld; signature.asc Description: PGP signature
Uso de máquinas virtuais
Pessoal, estou com uma pequena dúvida. Pode ser meio primária, mas gostaria de saber se isso é viável. Em uma situação hipotética eu teria um servidor linux (debian) com 4GB de ram. Nesse servidor eu não rodaria nada, além de duas máquinas virtuais. Uma máquina com o servidor Apache e outra máquina com servidor MySQL. Qual seria a configuração mais interessante dessas máquinas virtuais? Eu deveria usar no máximo 2GB (somadas as duas), ou eu poderia usar 3GB, ou até 3,5GB para as máquinas virtuais, considerando que o sistema não rodaria nada além delas? ... Tiago Passos voxtiago ARROBA gmail PONTO com http://tiagopassos.com http://twitter.com/blogtiagopassos http://last.fm/user/tiagopassos [image: http://sfx-images.mozilla.org/firefox/3.6/80x15_orange.png]http://br.mozdev.org/
Realizar RAID 1 em Servidor Debian 4
Boa noite pessoal, Resumindamente, tenho a intenção de fazer RAID 1 em um servidor HP Proliant DL 160 G5 que tem o Debian 4 instalado, e segundo o fabricante dá suporte no hardware para realizar esta operação. Atualmente existe um disco que ja esta em uso, e pretendo colocar outro em RAID 1 (Para Garantir a continuidade e a segurança dos dados), como devo proceder: Devo Formatar o HD atual, instalar o novo HD para posteriormente realizar a configuração do RAID 1 na bios? Como devo proceder? Alguém tem algum material que possa me ajudar nesta tarefa? Obrigado! -- Carlos Drehmer
Re: Uso de máquinas virtuais
Cara .. depende do hypervisor que tu vais usar.. se usar xen e rodar as paquinas paravirtualizadas acho que 600 de ram pro hospedeiro ta tranquilo Em 3 de setembro de 2010 20:24, Tiago Passos voxti...@gmail.com escreveu: Pessoal, estou com uma pequena dúvida. Pode ser meio primária, mas gostaria de saber se isso é viável. Em uma situação hipotética eu teria um servidor linux (debian) com 4GB de ram. Nesse servidor eu não rodaria nada, além de duas máquinas virtuais. Uma máquina com o servidor Apache e outra máquina com servidor MySQL. Qual seria a configuração mais interessante dessas máquinas virtuais? Eu deveria usar no máximo 2GB (somadas as duas), ou eu poderia usar 3GB, ou até 3,5GB para as máquinas virtuais, considerando que o sistema não rodaria nada além delas? ... Tiago Passos voxtiago ARROBA gmail PONTO com http://tiagopassos.com http://twitter.com/blogtiagopassos http://last.fm/user/tiagopassos [image: http://sfx-images.mozilla.org/firefox/3.6/80x15_orange.png]http://br.mozdev.org/
Re: Realizar RAID 1 em Servidor Debian 4
Nao sei se tem uma maneira mais facil e segura... acho que o negocio eh tu tirar o disco que está trabalhando.. tenta montar o raid 1 com o disco novo.. depois boota com um live cd.. faz uma copia do disco antigo para o raid.. testa td e ve se esta td ok com o disco novo no raid.. depois detona com o outro e deixa eles sincronizarem... Em 3 de setembro de 2010 20:38, Carlos Drehmer c.dreh...@gmail.comescreveu: Boa noite pessoal, Resumindamente, tenho a intenção de fazer RAID 1 em um servidor HP Proliant DL 160 G5 que tem o Debian 4 instalado, e segundo o fabricante dá suporte no hardware para realizar esta operação. Atualmente existe um disco que ja esta em uso, e pretendo colocar outro em RAID 1 (Para Garantir a continuidade e a segurança dos dados), como devo proceder: Devo Formatar o HD atual, instalar o novo HD para posteriormente realizar a configuração do RAID 1 na bios? Como devo proceder? Alguém tem algum material que possa me ajudar nesta tarefa? Obrigado! -- Carlos Drehmer
Re: Realizar RAID 1 em Servidor Debian 4
On Fri, 03 Sep 2010, Carlos Drehmer wrote: Resumindamente, tenho a intenção de fazer RAID 1 em um servidor HP Proliant DL 160 G5 que tem o Debian 4 instalado, e segundo o fabricante dá suporte no hardware para realizar esta operação. Atualmente existe um disco que ja esta Qual a placa de RAID por hardware embarcada que você possui no servidor? Se for uma muito porcaria, com menos que 256MB de RAM, use raid por software mesmo. Se for um dos modelos melhores, com pelo menos 256MB, compre a bateria recarregável para poder utilizar como cache de escrita. Sempre use o cache de escrita da RAID (com bateria) e DESLIGUE o cache de escrita dos discos. Provavelmente vai ter que reinstalar, as RAID da HP são mercenárias, sem pagar por licença extra (pelo menos na p410i dos G6 que temos por aqui), não fazem um monte de operações, não fazem RAID6 ou 60, não quebram uma RAID1 em duas, etc. É uma piada de mal gosto :-( ATUALIZE O FIRMWARE INTEIRO DO SERVIDOR ANTES. Particularmente BIOS, firmware da RAID e das baias hot-swap, e se puder, dos discos. Você tem que ir na página do servidor *e* do RAID card para achar todos os firmwares, é um saco. Os CDs prontos da HP não tem um terço do que devem... LEMBRE-SE de particionar o disco lógico da RAID de acordo com o tamanho da stripe que você usar, as partições e os volumes do LVM devem ser alinhados com a stripe size. Isso dá um trabalho danado, o Debian não faz (e nem o RedHat, que eu saiba). Particione na mão, usando os mesmos truques que se usa para SSD: http://thunk.org/tytso/blog/2009/02/20/aligning-filesystems-to-an-ssds-erase-block-size/ A stripe padrão da RAID da HP é 128kB, o mesmo tamanho do erase-block da SSD do Ted Tso, então pode usar os exemplos dele. Aliás, isso vale para QUALQUER raid por hardware, e para quase tudo quanto é volume de storage, etc. Devo Formatar o HD atual, instalar o novo HD para posteriormente realizar a configuração do RAID 1 na bios? Não, use o CD SmartStart mais novo (baixe do site) para seu servidor. Alguém tem algum material que possa me ajudar nesta tarefa? A HP tem um monte de manual... está tudo no site. -- One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie. -- The Silicon Valley Tarot Henrique Holschuh -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100904005417.ga21...@khazad-dum.debian.net
Re: Uso de máquinas virtuais
Exatamente como o Marlon falou: depende do hypervisor. Vários Hypervisors hj suportam um recurso chamado Memory Ballooning. Com esse recurso, na sua situação hipotética de um server físico com 4gb de ram, vc poderia ter, por exemplo, duas máquinas com 3gb de ram cada. Isso por que a memória na máquina física só seria alocada sob demanda (quando fosse realmente utilizada na máquina virtual), e num cenário médio ou ideal, as duas máquinas não iriam ocupar toda a memória ao mesmo tempo. No pior caso, qdo as duas máquinas usassem toda a memória, o sistema físico iria começar a usar swap e ia complicar a performance. Até onde vai minha experiencia em virtualização, não vale a pena rodar o banco de dados em um servidor virtualizado, salvo duas exceções: * o disco onde está armazenado o banco própriamente dito não é virtual * o SGBD roda na máquina virtual, mas o banco está em uma partição remota localizada em um storage via rede, com boa performance. 2010/9/3 Marlon Willrich uala...@gmail.com Cara .. depende do hypervisor que tu vais usar.. se usar xen e rodar as paquinas paravirtualizadas acho que 600 de ram pro hospedeiro ta tranquilo Em 3 de setembro de 2010 20:24, Tiago Passos voxti...@gmail.comescreveu: Pessoal, estou com uma pequena dúvida. Pode ser meio primária, mas gostaria de saber se isso é viável. Em uma situação hipotética eu teria um servidor linux (debian) com 4GB de ram. Nesse servidor eu não rodaria nada, além de duas máquinas virtuais. Uma máquina com o servidor Apache e outra máquina com servidor MySQL. Qual seria a configuração mais interessante dessas máquinas virtuais? Eu deveria usar no máximo 2GB (somadas as duas), ou eu poderia usar 3GB, ou até 3,5GB para as máquinas virtuais, considerando que o sistema não rodaria nada além delas? ... Tiago Passos voxtiago ARROBA gmail PONTO com http://tiagopassos.com http://twitter.com/blogtiagopassos http://last.fm/user/tiagopassos [image: http://sfx-images.mozilla.org/firefox/3.6/80x15_orange.png]http://br.mozdev.org/
Re: How to resume USB hubs
On Fri, 03 Sep 2010 11:40:03 +0800, Gero Putzar wrote: (...) Is there a way to reset the usb hubs or to reinitialise the corresponding kernel drivers or whatever deals with it? (I cannot reboot the computer at the moment.) I tried: # modprobe usbcore FATAL: Module usbcore not found. (...) AFAIK, ehci_hcd and uhci_hcd are the kernel modules for USB stack. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.03.06.18...@gmail.com
Re: Upgrade From 5.02 To 5.05
On 2010-09-03 02:14 +0200, Bob Proulx wrote: This appears to me that you are missing $ cat /etc/apt/apt.conf.d/00trustcdrom APT::Authentication::TrustCDROM true; which instructs apt to trust the cdrom. This assumes that sun-java6-bin and sun-java6-jre are on the cdrom and it is not trusted. This assumption is wrong, because these packages are in non-free and thus official DVDs do not include them. Sven -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/87vd6nwdlr@turtle.gmx.de
Re: Ethernet connection
On Fri, 03 Sep 2010 01:18:57 +0200, Rodolfo Medina wrote: (...) Now, I want to connect the Hyundai with an old desktop PC. How do I know how to properly edit the same file? You can run /sbin/ifconfig in the old desktop PC to find out the IP address in use. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.03.06.25...@gmail.com
Re: Ethernet connection
On 03/09/2010 1:18 a, Rodolfo Medina wrote: Some months ago I managed to connect my Hyundai and Acer laptops with an ethernet cable. I can copy file from one PC to another with rsync. The file `/etc/network/interfaces' is edited on the Acer as follows: auto lo iface lo inet loopback auto eth1 allow-hotplug eth1 iface eth1 inet static address 192.168.0.1 netmask 255.255.255.0 , and on the Hyundai: auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.0.2 netmask 255.255.255.0 Now, I want to connect the Hyundai with an old desktop PC. How do I know how to properly edit the same file? I tried with eth0, eth1, 192.168.0.3, etc..., but they don't connect: $ rsync -vrtul --delete u 192.168.0.2:/home/rodolfo ssh: connect to host 192.168.0.2 port 22: No route to host rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: unexplained error (code 255) at io.c(453) [sender=2.6.9] Please help on this issue. Thanks Rodolfo From laptop to old desktop you need to use a cross network cable, the two laptops are new and can auto detect the cable type used but not the old pc. Get a cross cable or connect through a hub or switch. -- Jangita | +256 76 91 8383 | Y! MSN: jang...@yahoo.com Skype: jangita | GTalk: jangita.nyag...@gmail.com -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c80add1.7070...@jangita.com
Re: ia64? amd64
On 02/09/2010 6:09 p, Michal wrote: It will, but just letting the OP about PAE incase they didn't know. Many people assume you need 64bit if you want to go voer the 4GB mark and not know about PAE Axel has a great email explaining PAE and 32 - 64 bit, for those who need any clarification = quote Yes, you're right: 64bit gives you all you want;-) However, 32bit together with PAE gives you a part of it: - the 32-Bit PAE-Kernels can use 4GB and distribute it to different processes - However, a single running process on the 32bit PAE-Kernel is limited to 4GB of Ram. So, when you have MANY processes running at the same time, each of which uses less then 4GB, a 32bit PAE-Kernel might be sufficient. On the other hand, if you have ONE process which will need more than 4 GB, you NEED 64bit-Kernel -- 32bit and PAE-Kernel won't be a solution for you. However, 64bit operating system is more efficient and flexible than 32bit + PAE-Kernel, as soon as you have 64bit hardware (That's my personal opinion:-)) The main reason why people continue using 32bit + PAE is, that there are some programs which do not exist for 64bit (like the new flash plugin from Adobe, so no Google Maps street view on 64-Bit Firefox;-)). Then you can either install a 64bit Kernel 64bit Debian, and some 32bit programs on top of it, or stay completely on 32bit... However, on a server this shouldn't be a problem for you. Axel /quote -- Jangita | +256 76 91 8383 | Y! MSN: jang...@yahoo.com Skype: jangita | GTalk: jangita.nyag...@gmail.com -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c80aeda.8020...@jangita.com
Re: Ethernet connection
Dne, 03. 09. 2010 10:12:01 je Jangita napisal(a): From laptop to old desktop you need to use a cross network cable, the two laptops are new and can auto detect the cable type used but not the old pc. Get a cross cable or connect through a hub or switch. In my experience, you don't need two autodetecting cards for a straight cable to work, one is enough. You'd need a crossover cable only if you try to connect two oldish machines, both without an autodetecting card. But I guess it may all depend on the particular card and its implementation of 'autodetection'. -- Regards, Klistvud Certifiable Loonix User #481801 http://bufferoverflow.tiddlyspot.com Please reply to the list, not to me. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1283502943.1029...@compax
RE: How to resume USB hubs
Thank you Camaleón for your answer. I found the following suggestion to switch of the autosuspend option for usb devices somewhere: # modprobe usbcore autosuspend=-1 That's why I mentioned this module. It seems that this usbcore is something different than ehci_hcd and uhci_hcd, at least in some conversations with similar topics usbcore and ehci_hcd appear both with usbcore having the autosuspend option. But I don't know. I did not find any information about possible options to ehci_hcd. Hah! Got it! While writing this I tried some more and now I've got my usb hubs back. Simply removed the modules and loaded them back again: # rmmod uhci_hcd # rmmod ehci_hcd # modprobe ehci_hcd # modprobe uhci_hcd (In fact I did it twice, because I read somewhere that the order matters, ehci_hcd should go first, and accidently I did it the other way around first, don't know if that matters.) So now, I know, how to get the usb hubs back again. What I still don't know is why they shut down in the first place. But I try to work that out a little later. There is still no power/autosuspend or power/level file under /sys/bus/usb/devices/... Thank you for pointing me in the right direction, Cheers, Gero. -Original Message- From: Camaleón [mailto:noela...@gmail.com] Sent: Friday, 3 September 2010 2:19 PM To: debian-user@lists.debian.org Subject: Re: How to resume USB hubs On Fri, 03 Sep 2010 11:40:03 +0800, Gero Putzar wrote: (...) Is there a way to reset the usb hubs or to reinitialise the corresponding kernel drivers or whatever deals with it? (I cannot reboot the computer at the moment.) I tried: # modprobe usbcore FATAL: Module usbcore not found. (...) AFAIK, ehci_hcd and uhci_hcd are the kernel modules for USB stack. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.03.06.18...@gmail.com -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/000301cb4b42$6ad6fc30$4084f4...@com.au
RE: How to resume USB hubs
Thanks for your suggestion, Olaf. Unfortunately I can't shutdown the system at the moment, I think in this case changing something in the BIOS is not possible or has no effect, am I right? Or else how could I do that? Btw, I would not know what do change, anyway. I may look at the BIOS parameters when I restart the computer the next time, maybe I find something. Thanks again, Gero. -Original Message- From: Olaf Reitmaier Veracierta [mailto:ola...@gmail.com] Sent: Friday, 3 September 2010 12:31 PM To: debian-user@lists.debian.org Subject: Re: How to resume USB hubs What about looking or turn to defaults your bios? On 02/09/10 23:10, Gero Putzar wrote: Hi, when I tried to log in to my computer today, I realized that the usb ports are not working anymore, therefore I've got no keyboard and no mouse anymore. Logging in via ssh, I checked that besides that everything seems to be running fine. I googled around a bit and assume that the built in usb hubs (there seem to be 4 or 5 of them) shut down maybe as a power saving feature. Does anyone have an idea how to wake them up again? If I plug in anything into one of the usb ports the /var/log/messages doesn't show the usual message that the kernel recognized a new usb device. I tried to write to the /sys/bus/usb/... files but unfortunately: # echo on /sys/bus/usb/devices/1-0\:1.0/power/level bash: /sys/bus/usb/devices/1-0:1.0/power/level: No such file or directory Is there a way to reset the usb hubs or to reinitialise the corresponding kernel drivers or whatever deals with it? (I cannot reboot the computer at the moment.) I tried: # modprobe usbcore FATAL: Module usbcore not found. ... and again without success: # /etc/init.d/udev restart I'm running the current Debian Lenny on a HP desktop with the standard Gnome desktop. Thanks, Gero. I attached some output of how I tried to figure out the reason. Mouse and keyboard were connected (via an external hub in the monitor) but that does not seem to matter. # ls /sys/bus/usb/devices 1-0:1.0 2-0:1.0 3-0:1.0 4-0:1.0 5-0:1.0 usb1 usb2 usb3 usb4 usb5 # ls -R /sys/bus/usb/devices/1-0\:1.0/ /sys/bus/usb/devices/1-0:1.0/: bAlternateSetting bInterfaceSubClass ep_81 uevent bInterfaceClass bNumEndpoints modalias usb_endpoint:usbdev1.1_ep81 bInterfaceNumberbus power bInterfaceProtocol driver subsystem /sys/bus/usb/devices/1-0:1.0/power: wakeup # cat /sys/bus/usb/devices/1-0\:1.0/power/wakeup # echo enable /sys/bus/usb/devices/1-0\:1.0/power/wakeup bash: echo: write error: Invalid argument # lsusb Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub # lsusb -v -s 1: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass9 Hub bDeviceSubClass 0 Unused Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable0x00 PortPwrCtrlMask0xff Hub Port Status: Port 1: .0100 power Port 2: .0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled -- -
Re: WINE in Squeeze taking associations of everything
Le 03/09/2010 à 05:28, GhostlyDeath a écrit : Hello, with the current WINE in Squeeze, all the file associations change and this is very annoying and as such I cannot have WINE installed, which means not testing my programs in a Windows-Like environment. WINE ruins my desktop completely. What I mean by this is that: Any text file now open in notepad.exe instead of gEdit. It might as well open up DosBox with FreeDos' version of EDIT.COM. Any image file opens up in paint instead of eye of gnome or GIMP. Any HTML file opens up in WineBrowser instead of epiphany. It's impossible to change single file associations because even if I use the GNOME association stuff, alot of other things still use WINE stuff regardless and cannot be changed. In lenny, none of this happened and everything worked great, however that changed in Squeeze. Why do WINE associations take priority now instead of in the past when they did not? I use Window Maker with gnome-terminal as my terminal, epiphany as my browser. Any suggestions would be very helpful. Please fill a bug report against wine package :-) Alain -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009031038.16541.alain.baecker...@laposte.net
mount a UDF image on a loop device
Dear all, I want to mount a iso image whose filesystem is UDF on a loop device: sudo mount -o loop -t udf file.iso /tmp/image there's no error from the above command line and `mount' shows the image has been mounted: file.iso on /tmp/image type udf (rw,loop=/dev/loop0) But /tmp/image is empty. I can mount it with iso9660, which is not what I want, for the long path name is truncated in the mount point. I use Debian Lenny. Any idea for this issue? Best regards, Yuwen
Re: (SOLVED) Re: ia64? amd64
On 09/02/2010 10:52 AM, Jangita wrote: On 02/09/2010 3:50 p, Jangita wrote: Hello, Difference between ia64 and amd64? I'm moving to servers with larger memory 4GB so want to move to 64 bit. Google is your friend. When I search it using the string ia64, the first link is: http://en.wikipedia.org/wiki/Itanium -- Seek truth from facts. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c80bbd0.7030...@cox.net
Thunderbird's not unsubscribing me from imap folders
I read all my e-mail via imap using Thunderbird (Icedove). I have several folder hierachies in my personal account, some of which contains mail put their by an exim filter as my .forward file on the server (the mail is put into Maildirs in my account by exim). This Debian Mailing list is one such folder Another folder is spam, with subfolders containing devnull and teergrube which contain messages put there are part of the spam checking process (sa-exim). This at least gives me an opportunity for a while (I have a cron job which expires - ie deletes - the messages) to check if I think I might have a false positive I am looking for. However, although I have had this facility in place for a while, Thunderbird seems to have suddenly found out about them - and when I ask it to go to next unread message its jumping into these folders and returning the messages. Since I get A LOT of these, its very inconvenient. I am definitely NOT subscribed to the folder - and the properties on the folder also say NOT to check for new e-mail. I haven't been able to find how to tell Thunderbird not to put them in my folder list and not to check for new mail. I tried subscribing and unsubscribing. I even tried deleting the folders and re-creating them on the server side. Any ideas of how to proceed. -- Alan Chandler http://www.chandlerfamily.org.uk -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c80c461.2020...@chandlerfamily.org.uk
sid: Console problems after starting X
Hello all, Here's what happening. After boot: normal console font (about 80 characters wide) After startx: small console font (maybe 132 characters?) A little later: no display in console at all (Alt-F7 still gets me back to X) This problem appeared soon after converting to dependency-based boot process using insserv. I've been using a self-compiled amd64 kernel with 32-bit userland. No such problems before insserv. Thanks for any possible leads. I have no idea where to even start. thanks, Joel -- Joel Roth -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100903105821.ga3...@sprite
Re: Thunderbird's not unsubscribing me from imap folders
On 03/09/10 10:48, Alan Chandler wrote: I read all my e-mail via imap using Thunderbird (Icedove). I have several folder hierachies in my personal account, some of which contains mail put their by an exim filter as my .forward file on the server (the mail is put into Maildirs in my account by exim). This Debian Mailing list is one such folder Another folder is spam, with subfolders containing devnull and teergrube which contain messages put there are part of the spam checking process (sa-exim). This at least gives me an opportunity for a while (I have a cron job which expires - ie deletes - the messages) to check if I think I might have a false positive I am looking for. However, although I have had this facility in place for a while, Thunderbird seems to have suddenly found out about them - and when I ask it to go to next unread message its jumping into these folders and returning the messages. Since I get A LOT of these, its very inconvenient. I am definitely NOT subscribed to the folder - and the properties on the folder also say NOT to check for new e-mail. I haven't been able to find how to tell Thunderbird not to put them in my folder list and not to check for new mail. I tried subscribing and unsubscribing. I even tried deleting the folders and re-creating them on the server side. Any ideas of how to proceed. I had a problem with folder subscriptions. I would unsubscribe and get rid of them, then it would come back. I had to restart Thunderbird after doing so to make sure they didn't come back. what version of TB are you using -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c80d522.7010...@sharescope.co.uk
Re: OT Re: mounting samsung galaxy S
Hi, Jordon Bedwell wrote: blah blah blah, anyways here is a link: http://forum.cyanogenmod.com/forum/83-samsung-galaxy-s/ Looking at: http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_Samsung_Galaxy_S_%28International%29 It says: Warning: Rooting the Samsung Galaxy S will void the warranty. Is there any way back from that to get back to a normal warranty situation? -- Kind Regards AndrewM Andrew McGlashan Broadband Solutions now including VoIP Current Land Line No: 03 9912 0504 Mobile: 04 2574 1827 Fax: 03 9012 2178 National No: 1300 85 3804 Affinity Vision Australia Pty Ltd http://www.affinityvision.com.au http://adsl2choice.net.au In Case of Emergency -- http://www.affinityvision.com.au/ice.html -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c80d9ab.2090...@affinityvision.com.au
Re: Ethernet connection
Rodolfo Medina wrote: Some months ago I managed to connect my Hyundai and Acer laptops with an ethernet cable. I can copy file from one PC to another with rsync. The file `/etc/network/interfaces' is edited on the Acer as follows: auto eth1 allow-hotplug eth1 iface eth1 inet static address 192.168.0.1 netmask 255.255.255.0 , and on the Hyundai: auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.0.2 netmask 255.255.255.0 Now, I want to connect the Hyundai with an old desktop PC. How do I know how to properly edit the same file? I tried with eth0, eth1, 192.168.0.3, etc..., but they don't connect: Camaleón noela...@gmail.com writes: You can run /sbin/ifconfig in the old desktop PC to find out the IP address in use. From the old desktop: # ifconfig eth0 Link encap:Ethernet HWaddr 00:19:cb:d7:b6:c5 inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::219:cbff:fed7:b6c5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:21 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:3452 (3.3 KiB) Interrupt:11 Base address:0xb800 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:280 (280.0 B) TX bytes:280 (280.0 B) From the Hyundai: # ifconfig eth1 Link encap:Ethernet HWaddr 00:03:0D:33:02:17 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::203:dff:fe33:217/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:468 (468.0 b) Interrupt:201 Base address:0xd800 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:86 errors:0 dropped:0 overruns:0 frame:0 TX packets:86 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:9358 (9.1 KiB) TX bytes:9358 (9.1 KiB) Note that, strangely, Hyundai lo's address 127.0.0.1 is the same as old desktop main address. I think this generates confusion (see below). From the old desktop: $ ping 192.168.0.1 connect: Network is unreachable From the Hundai: $ ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.050 ms 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.037 ms 64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.038 ms 64 bytes from 127.0.0.1: icmp_seq=4 ttl=64 time=0.039 ms , but I suspect it confuses old desktop address: 127.0.0.1 with the same address of Hyundai's lo. In fact, when I run rsync, it apparently transfer files: $ rsync -vr test 127.0.0.1:/home/rodolfo rodo...@127.0.0.1's password: building file list ... done sent 97 bytes received 20 bytes 33.43 bytes/sec total size is 24934 speedup is 213.11 but not actually, since no directory `test' is present in old desktop. Please help. Thanks Rodolfo -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/877hj3giwf@gmail.com
Out of focus webcam
hi I am trying to find a way to change the focus of my webcam: Philips (or NXP) PCVC730K Webcam [pwc]. what do people recommend ? I am starring at the following cmd line, but I really do not understand what I need to change: $ setpwc -p setpwc v1.2, (C) 2003-2006 by folk...@vanheusden.com Current device: Philips 730 webcam VIDIOCPWCPROBE returns: Philips 730 webcam - 730 Serial number: 01699900 Resolution (x, y): 320, 240 Offset: 0, 0 Framerate: 10 Brightness: 32256 Hue: 65535 Colour: 32441 Contrast: 32768 Whiteness: 32768 Palette: YUV 4:2:0 Planar Compression preference: 1 Automatic gain control: -10273 Whitebalance mode: auto Blinking of LED is not supported by the combination of your webcam and the driver. Sharpness: 37888 Backlight compensation mode: off Anti-flicker mode: off Noise reduction mode: 1 Pan/tilt range is not supported by the combination of your webcam and the driver. Get pan/tilt position is not supported by the combination of your webcam and the driver. $ uvcdynctrl -c Listing available controls for device video0: Noise reduction Flickerless Backlight compensation Contour Auto contour Colour mode Gain Level Auto Gain Enabled Shutter Speed (Exposure) Gamma Blue Gain Red Gain Auto White Balance Saturation Contrast Brightness thanks -- Mathieu Bus 002 Device 005: ID 0471:0310 Philips (or NXP) PCVC730K Webcam [pwc] Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0471 Philips (or NXP) idProduct 0x0310 PCVC730K Webcam [pwc] bcdDevice0.03 iManufacturer 0 iProduct0 iSerial 1 01699900 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 490 bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes1 Transfer TypeIsochronous Synch Type None Usage Type Data wMaxPacketSize 0x 1x 0 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes1 Transfer TypeIsochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c4 1x 196 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 2 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes3 Transfer TypeInterrupt Synch Type None
Re: Ethernet connection
On Fri, 03 Sep 2010 13:34:40 +0200, Rodolfo Medina wrote: Camaleón writes: You can run /sbin/ifconfig in the old desktop PC to find out the IP address in use. From the old desktop: # ifconfig eth0 Link encap:Ethernet HWaddr 00:19:cb:d7:b6:c5 inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0 O.k. so your old desktop is not getting any IP (127.0.0.1 is the loopback address). You have to manually setup one for it. If you need further assintance for configuring your ethernet card on your old desktop, just ask (also, tell us what operating system is running) :-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.03.11.43...@gmail.com
problems with cpufreq utils
Hi I am having problems on my media box, it used to be able to play hd stuff easily, recently it has been having problems. I believe I have tracked down the problem to cpufreq-utils. analyzing CPU 3: driver: powernow-k8 CPUs which run at the same hardware frequency: 3 CPUs which need to have their frequency coordinated by software: 3 maximum transition latency: 8.0 us. hardware limits: 800 MHz - 3.00 GHz available frequency steps: 3.00 GHz, 2.30 GHz, 1.80 GHz, 800 MHz available cpufreq governors: powersave, conservative, userspace, ondemand, performance current policy: frequency should be within 800 MHz and 3.00 GHz. The governor performance may decide which speed to use within this range. current CPU frequency is 800 MHz (asserted by call to hardware). cpufreq stats: 3.00 GHz:89.00%, 2.30 GHz:0.02%, 1.80 GHz:0.07%, 800 MHz:10.91% (3833) I have tried setting the governor to performance and when I did this before this line would be different current CPU frequency is 800 MHz (asserted by call to hardware). I have tried setting the governor to userspace and setting /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed the line stays the same, the stats go up for the rite hz, but I don't think I am getting the performance I should be :( Alex -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikm6sardl4y2s0fxdmmxssq44tbexq3j56j8...@mail.gmail.com
Re: Ethernet connection
Rodolfo Medina wrote: Some months ago I managed to connect my Hyundai and Acer laptops with an ethernet cable. I can copy file from one PC to another with rsync. The file `/etc/network/interfaces' is edited on the Acer as follows: auto eth1 allow-hotplug eth1 iface eth1 inet static address 192.168.0.1 netmask 255.255.255.0 , and on the Hyundai: auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.0.2 netmask 255.255.255.0 Now, I want to connect the Hyundai with an old desktop PC. How do I know how to properly edit the same file? I tried with eth0, eth1, 192.168.0.3, etc..., but they don't connect: Camaleón writes: You can run /sbin/ifconfig in the old desktop PC to find out the IP address in use. From the old desktop: # ifconfig eth0 Link encap:Ethernet HWaddr 00:19:cb:d7:b6:c5 inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0 Camaleón noela...@gmail.com writes: O.k. so your old desktop is not getting any IP (127.0.0.1 is the loopback address). You have to manually setup one for it. If you need further assintance for configuring your ethernet card on your old desktop, just ask (also, tell us what operating system is running) :-) Of course I need further assistance! I have Lenny on old PC and Etch on Hyundai. Thanks Rodolfo -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/87pqwvdnnc@gmail.com
Re: Ethernet connection
Hi Rodolfo, Camaleón writes: You can run /sbin/ifconfig in the old desktop PC to find out the IP address in use. From the old desktop: # ifconfig eth0 Link encap:Ethernet HWaddr 00:19:cb:d7:b6:c5 inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0 Camaleón noela...@gmail.com writes: O.k. so your old desktop is not getting any IP (127.0.0.1 is the loopback address). You have to manually setup one for it. If you need further assintance for configuring your ethernet card on your old desktop, just ask (also, tell us what operating system is running) :-) Of course I need further assistance! I have Lenny on old PC and Etch on Hyundai. On your old PC, ifconfig eth0 192.168.0.3 netmask 255.255.255.0 up should be sufficient to configure its Network -- afterwards, the communication with the laptops should work (This command is not preserved during system restarts -- after each restart, you have to set again the IP adress netmask). Axel -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100903122621.gp15...@axel
HA Debian Setup (2 Nodes)
Hi List, This is probably not the list for this question, but I guess it is a good starting point since I used debian servers for all my deployments. I want a scenario where I have two servers that appear as one server (one IP) to the outside world, with both servers having *exactly* the same data and services. So in case one server falls into a pond somehow, I woun't even loose a ping from my clients. Any help or pointers as to where I can start digging for information? the web speaks about pacemaker, drbd, some even talk about xen with remus, again a flood of information, confusing at best. I want a simple clean solution that works great with debian. I'd prefer a bare metal approach with services/systems running to make sure my setup is always available but transparent to the various client services connecting to it, and also transparent to the services running inside the box(ex). Thanks, -- Jangita | +256 76 91 8383 | Y! MSN: jang...@yahoo.com Skype: jangita | GTalk: jangita.nyag...@gmail.com -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c80edf4.8050...@jangita.com
Re: problems with cpufreq utils
On 09/03/10 13:53, Alexander Samad wrote: Hi I am having problems on my media box, it used to be able to play hd stuff easily, recently it has been having problems. I believe I have tracked down the problem to cpufreq-utils. analyzing CPU 3: driver: powernow-k8 CPUs which run at the same hardware frequency: 3 CPUs which need to have their frequency coordinated by software: 3 maximum transition latency: 8.0 us. hardware limits: 800 MHz - 3.00 GHz available frequency steps: 3.00 GHz, 2.30 GHz, 1.80 GHz, 800 MHz available cpufreq governors: powersave, conservative, userspace, ondemand, performance current policy: frequency should be within 800 MHz and 3.00 GHz. The governor performance may decide which speed to use within this range. current CPU frequency is 800 MHz (asserted by call to hardware). cpufreq stats: 3.00 GHz:89.00%, 2.30 GHz:0.02%, 1.80 GHz:0.07%, 800 MHz:10.91% (3833) I have tried setting the governor to performance and when I did this before this line would be different current CPU frequency is 800 MHz (asserted by call to hardware). I have tried setting the governor to userspace and setting /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed the line stays the same, the stats go up for the rite hz, but I don't think I am getting the performance I should be :( Alex I'd check if preformance does his job. Try set it with # cpufreq-set -g performance and stress the cpu to see if frequency rises, for example by # yes /dev/null Then avoid reboot and try videos. If everything turned fine check if your setting can sourvive a reboot and whether your debian needs a fix in his init scripts. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/i5qqsc$3o...@dough.gmane.org
Re: HA Debian Setup (2 Nodes)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jangita wrote: Hi List, This is probably not the list for this question, but I guess it is a good starting point since I used debian servers for all my deployments. I want a scenario where I have two servers that appear as one server (one IP) to the outside world, with both servers having *exactly* the same data and services. So in case one server falls into a pond somehow, I woun't even loose a ping from my clients. Any help or pointers as to where I can start digging for information? the web speaks about pacemaker, drbd, some even talk about xen with remus, again a flood of information, confusing at best. I want a simple clean solution that works great with debian. I'd prefer a bare metal approach with services/systems running to make sure my setup is always available but transparent to the various client services connecting to it, and also transparent to the services running inside the box(ex). Thanks, take a closer look at 'heartbeat' packages, it works like a treat - -- |_|0|_| | |_|_|0| Heghlu'Meh QaQ jajVam | |0|0|0| kuLa - | gpg --keyserver pgp.mit.edu --recv-keys 0xC100B4CA -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iQEcBAEBAgAGBQJMgO/eAAoJEOqHloDBALTKz+oIAIRNlOIbmrR2+BHQkR6YHNFX BhDD+DL9hsscDcH4bryKPDUV/QzKaps2eJzbcUliUhLLAW6ep2ROrlP5+b5Pp5vL LWghmHg15in7ydxfJPp0/lLKrY9WgOEp2fKFfEa98WPal7Qd/R4quHlQ1dojvdvJ ecc5wRuNNXldLwXTaDqcxMNbMo827zD5u2fF3qwhQmXCvQW+cmqRgcT9MFxiz1Wo CD4hLkzEwuZRlHF5SJUA7tvMiTr+jkio0FHalafs249H0e1wmK8VKxERkHp6nxsi RVZVvSVB4/0HUmctdfBbuN0U8IbkJdi652HyfJNszUuj5xqV9xBwISAUgRup3Wc= =kb7C -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c80efdf.1010...@kulisz.net
[SOLVED] Problems mounting cdrom
On Thu, 02 Sep 2010 19:22:40 -0400 (EDT), Rodolfo Medina wrote: It _seems_ ok now. Thanks to Stephen whose help was definitve. I'm glad it works now. But for the benefit of others who may find your post on the Internet, would you care to share with us exactly what you did to solve the problem? -- .''`. Stephen Powell : :' : `. `'` `- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/2042724685.584195.1283518700100.javamail.r...@md01.wow.synacor.com
Re: Ethernet connection
Camaleón wrote: On Fri, 03 Sep 2010 13:34:40 +0200, Rodolfo Medina wrote: Camaleón writes: You can run /sbin/ifconfig in the old desktop PC to find out the IP address in use. From the old desktop: # ifconfig eth0 Link encap:Ethernet HWaddr 00:19:cb:d7:b6:c5 inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0 O.k. so your old desktop is not getting any IP (127.0.0.1 is the loopback address). [...] And is also on the lo interface where it should be. Not quite sure how you've managed that, but I might be minded to double check that /etc/network/interfaces file (on old desktop). Everything has an lo interface on 127.0.0.1, that's correct; it's not the main address and is inaccessible from outside the host itself. It's called the loopback and is used for where you need to make an ip connection, but fold it back onto a server program running locally (you can do this with an external address too, but lo is there for if you're not running one, or it's not up at the moment, etc.). eth interfaces shouldn't have this address. -- Chris Jackson Shadowcat Systems Ltd. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c80ecdc.20...@shadowcat.co.uk
How to format usb stick ?
Hi, everyone How can I format USB stick with vfat? In system menu, I cannot find the tools for it. Thanks in advance. Best Regards, J.HWan Kim -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c80f33b.4070...@gmail.com
Re: HA Debian Setup (2 Nodes)
On 03/09/10 13:45, Jangita wrote: Hi List, This is probably not the list for this question, but I guess it is a good starting point since I used debian servers for all my deployments. I want a scenario where I have two servers that appear as one server (one IP) to the outside world, with both servers having *exactly* the same data and services. So in case one server falls into a pond somehow, I woun't even loose a ping from my clients. Any help or pointers as to where I can start digging for information? the web speaks about pacemaker, drbd, some even talk about xen with remus, again a flood of information, confusing at best. I want a simple clean solution that works great with debian. I'd prefer a bare metal approach with services/systems running to make sure my setup is always available but transparent to the various client services connecting to it, and also transparent to the services running inside the box(ex). Thanks, Well, what are they hosting? Some setups use dedicated load balencers for things like web traffic et al. There is quite a good guide using DRBD and pacemaker. Why not have a look at this http://clusterlabs.org/doc/Cluster_from_Scratch.pdf First get down what you are hosting and how. Then work out how you want this to be highly avalible. Is data shared or are you using data on a backend NAS/SAN type device. Is it active-active or active-passivethese are all questions you need to answer first of all -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c80efc2.7010...@sharescope.co.uk
Re: How to resume USB hubs
On 09/03/2010 10:32 AM, Gero Putzar wrote: Thanks for your suggestion, Olaf. Unfortunately I can't shutdown the system at the moment, I think in this case changing something in the BIOS is not possible or has no effect, am I right? Or else how could I do that? Btw, I would not know what do change, anyway. I may look at the BIOS parameters when I restart the computer the next time, maybe I find something. Thanks again, Gero. Some BIOS have enable/disable usb keyboard, boot from usb and maybe something else usb related . -- Bye, Goran Dobosevic Hrvatski: www.dobosevic.com English: www.dobosevic.com/en/ Registered Linux User #503414 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c80f466.3030...@dobosevic.com
Re: How to format usb stick ?
Hi, How can I format USB stick with vfat? In system menu, I cannot find the tools for it. I would propose to use a text console. The tool is mkfs.vfat, contained in the debian-package dosfstools (This has to be installed first). HTH, Axel -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100903131628.gs15...@axel
Re: How to format usb stick ?
On Fri, 2010-09-03 at 15:16 +0200, Axel Freyn wrote: Hi, How can I format USB stick with vfat? In system menu, I cannot find the tools for it. I would propose to use a text console. The tool is mkfs.vfat, contained in the debian-package dosfstools (This has to be installed first). You can also try gparted if you'dd prefer GUI based... It also allows you to re-arrange the partitions. cheers jmf HTH, Axel -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1283520200.2351.36.ca...@squeeje.critical.pt
Re: [SOLVED] Problems mounting cdrom
Rodolfo Medina rodolfo.med...@gmail.com writes: I just removed from the case of my PC two old cdrom/dvd devices that were broken. Then I set all the cables as I could but I'm no expert and don't know if I did everything ok. Anyway, all seems ok except that I can't mount the cdrom device that is now in my system. The problem is that I don't manage to organize the cables the right way. Is there on line some pictures where I can learn how to properly set them? It _seems_ ok now. Thanks to Stephen whose help was definitve. Stephen Powell zlinux...@wowway.com writes: I'm glad it works now. But for the benefit of others who may find your post on the Internet, would you care to share with us exactly what you did to solve the problem? That's what I usually do: after coming to the solution, post it to the list that made it possible. However, now, as I wrote, the problem was that I didn't know how to properly plug each cable. How can I describe the way I've plugged them finally right? I wish I could, as a `promemoria' also for me when in future I want to open the case to change cdrom, etc. Only a picture, maybe. Rodolfo -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/874oe6lxo9@gmail.com
Re: [solved] Ethernet connection
Rodolfo Medina wrote: Some months ago I managed to connect my Hyundai and Acer laptops with an ethernet cable. I can copy file from one PC to another with rsync. The file `/etc/network/interfaces' is edited on the Acer as follows: auto eth1 allow-hotplug eth1 iface eth1 inet static address 192.168.0.1 netmask 255.255.255.0 , and on the Hyundai: auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.0.2 netmask 255.255.255.0 Now, I want to connect the Hyundai with an old desktop PC. How do I know how to properly edit the same file? I tried with eth0, eth1, 192.168.0.3, etc..., but they don't connect: Axel Freyn axel-fr...@gmx.de writes: On your old PC, ifconfig eth0 192.168.0.3 netmask 255.255.255.0 up should be sufficient to configure its Network -- afterwards, the communication with the laptops should work (This command is not preserved during system restarts -- after each restart, you have to set again the IP adress netmask). Fantastic!! It works. Then, to make that permanent, on old PC I edited /etc/network/interfaces as follows: auto lo iface lo inet loopback auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 Now I copy files from one to another with rsync. Thanks a lot, and thanks to Debian user mailig list Rodolfo P.S.: but now, suppose that I want, from the laptop, to delete a file that's in the other machine, or viceversa: is it possible, and with what command? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/871v9alxmy.fsf...@gmail.com
Re: Thunderbird's not unsubscribing me from imap folders
On 03/09/10 11:59, Michal wrote: what version of TB are you using Icedove 3.0.6 (ie standard Debian Squeeze) -- Alan Chandler http://www.chandlerfamily.org.uk -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c8106ff.6050...@chandlerfamily.org.uk
Stop dhclient from adding a default gateway
Hello, I have a Debian Lenny box with two NICs, eth0 and eth1. eht1 is a trunking interface and can be put onto any VLAN. Whenever eth1 is put onto a VLAN, I want it to get an address from DHCP but I do *not* want it to set a default gateway. I set up a definition for each interface in dhclient.conf and explicitly requested everything except routers. Here's an example using the interface for VLAN 52: interface vlan52 { request subnet-mask, broadcast-address, time-offset, domain-name, domain-name-servers, host-name; } I deleted everything else from the config file, so it's literally just one big list of interface definitions like the one above. I also set up two shell scripts per VLAN, one to set up a static route and the other to delete the route, and set these scripts to run as post-up/pre-down commands for the respective VLAN interface in /etc/network/interfaces, like so: # VLAN 52 - Library iface vlan52 inet dhcp vlan_raw_device eth1 post-up /etc/network/scripts/vlan52_add_route pre-down /etc/network/scripts/vlan52_del_route The scripts work and I get the static route, but I still get a default route as well: # ifup vlan52 Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config Added VLAN with VID == 52 to IF -:eth1:- Internet Systems Consortium DHCP Client V3.1.2 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/vlan52/00:0d:56:f0:33:5c Sending on LPF/vlan52/00:0d:56:f0:33:5c Sending on Socket/fallback DHCPDISCOVER on vlan52 to 255.255.255.255 port 67 interval 5 DHCPOFFER of 10.5.2.176 from 10.5.2.1 DHCPREQUEST of 10.5.2.176 on vlan52 to 255.255.255.255 port 67 DHCPACK of 10.5.2.176 from 10.5.2.1 bound to 10.5.2.176 -- renewal in 107356 seconds. # netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.5.2.010.5.2.1255.255.255.0 UG0 0 0 vlan52 -- STATIC ROUTE SET BY THE POST-UP SCRIPT 10.5.2.00.0.0.0 255.255.255.0 U 0 0 0 vlan52 -- DEFAULT ROUTE ADDED BY DHCP! 10.3.0.00.0.0.0 255.255.248.0 U 0 0 0 eth0 0.0.0.0 10.3.1.10.0.0.0 UG0 0 0 eth0 Any help would be greatly appreciated. Thanks! Dave -- Dave Parker Systems Administrator Utica College Integrated Information Technology Services (315) 792-3229 Registered Linux User #408177 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c80f901.2040...@utica.edu
Re: Out of focus webcam
On 03/09/10 12:36, Mathieu Malaterre wrote: hi I am trying to find a way to change the focus of my webcam: Philips (or NXP) PCVC730K Webcam [pwc]. what do people recommend ? Turning the front ring. Even today, I doubt that anything described as a webcam (rather than a professional videoconferencing camera) would have a servo-driven focus adjustment. -- Joe -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c8108a5.4080...@jretrading.com
Re: What's the Debian way of disabling suspend to disk?
On Thursday 02 September 2010 21:11:33 Frank Steinmetzger wrote: Am Donnerstag, 2. September 2010 schrieb Camaleón: On Thu, 02 Sep 2010 13:40:56 +0200, Frank Steinmetzger wrote: Am Donnerstag, 2. September 2010 schrieb Camaleón: I meant you can hibernate your computer with any amount of ram available, there are still restoring speed gains in some computers. Your mileage may vary. But you also need as much space on the HDD to store the RAM content, which I don’t really do. Neither do I. I do not use hibernation at all. My point was just stating the fact that it could be useful under some environments/setups regardless the amount of installed memory. OK, then that would belong into the OT realm for this particular thread. This is why on systems with lots of RAM there is no gain in speed by hibernating vs. restarting + session saving. I have 8 GiB of ram and a cold start takes some minutes :-) Booting to the login screeen takes ~35–40 seconds here. Plus another half minute to load the DE. Usually I am using normal standby (aka suspend to RAM). Powerdevil has no function to disable that feature, which is why I want to disable it one level down in the hierarchy. You mean disable at BIOS level? :-? Well, on my old Gentoo system - naturally with my own, laptop-optimised kernel - I only had Sleep available in Powerdevil, so I figured that the kernel has to (not) support it for the button (not) to show up. I just never bothered finding out how to get S2D working. [...] KDE should not trigger power savings unless you configure for doing so. What you can do is hide/remove the icon No, I _can't_. That's the whole reason for my asking here. There is no option to hide the button. I've attached a tiny screenie where you can see the problematic combo box and the hibernation (Tiefschlaf) button right underneath. I'm still not clear why you cannot just remove it. Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009031610.13087.lisi.re...@gmail.com
Re: Out of focus webcam
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Joe wrote: On 03/09/10 12:36, Mathieu Malaterre wrote: hi I am trying to find a way to change the focus of my webcam: Philips (or NXP) PCVC730K Webcam [pwc]. what do people recommend ? Turning the front ring. Even today, I doubt that anything described as a webcam (rather than a professional videoconferencing camera) would have a servo-driven focus adjustment. I can make adjustments with luvcview, and if I then bring up cheese, those adjustments are the same. Not sure if that's what you're looking for. Tom -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkyBEQkACgkQXu0IVO1sqttYEQCgkuXiUqoXWjqU/KLP3W+djRYY 7eAAnjvdhrEQeqD2L1SP8SnOPYcFZ2mY =gc/+ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c811109.2000...@meltel.net
Re: Out of focus webcam
On Fri, Sep 3, 2010 at 4:39 PM, Joe j...@jretrading.com wrote: On 03/09/10 12:36, Mathieu Malaterre wrote: hi I am trying to find a way to change the focus of my webcam: Philips (or NXP) PCVC730K Webcam [pwc]. what do people recommend ? Turning the front ring. lol ! I did not realize that... sorry for the noise... thx ! -- Mathieu -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktinuv8fmjxmtxg=dqw3-3ul9dpqzqvfmqrptn...@mail.gmail.com
Re: Now lost boot dir
On 09/02/2010 12:26 PM, d_ba...@012.net.il wrote: Using the Debian rescue CD, I built a 2.6.34 kernel compiling in more.However, locale issues prevented me from installing it and running lilo.Funny--worked fine last week. I got it to work today. Kernel will still not boot. I am wondering whether to bite the bullet and simply install a stock kernel. Since I need Nouveau, it would needto be a more recent kernel, a 2.6.33,4 or 5. Which is recommended(all are called experimental and many images are simply lacking)?The standard 2.6.32 kernel used by Squeeze (I currently use 2.6.32-5-686 version 2.6.32-20) works fine, and includes the nouveau driver. The nouveau driver seems to work OK in my experience, as long as you don't need interlaced video modes.OK. Does it work with sid xorg-video-nouveau or does it need the version from testing?Heard tell of compatibility problems with various nouveau compilesand its xorg drivers. This would, of course, use th e initrd.I stopped using initrd when the installations ran yaird and this neverworked.Debian has given up on yaird for now. Stock kernels use initramfs-tools, which seems to work fine. I used to use the old mkinitrd and have an obselete conffor it. Now, the update-initramfs serves this. Is this smart enoughto get me running with the newer SATA/PATA drivers (module policydefaults to most)?The 2.6.32-5-686 kernel uses the newer libata drivers. Do I need to specify most everything likein mkinitrd?MODULES=dep in /etc/initramfs-tools/conf.d/driver-policy seems to work fine as long as you don't cross build your initial RAM file systems. I.e. don't build an initial RAM file system for a kernel which uses the old IDE drivers while running a kernel which uses the newer libata drivers, or vice versa.I would run it from the rescue CD which uses the newer libata drivers. (Yaird had a test mode which gave a usable list of whatto include.)If you use the -v switch on update-initramfs it will list the modules that it includes. Can these images be used with lilo or are they alreadytoo large?I don't have any personal experience with the amd64 images, but I can attest that the i386 ones work fine with lilo, especially if you use the large-memory option, and especially if you use MODULES=dep. I don't know if I mentioned this earlier, but you might want to take a look at my kernel-building web page, http://www.wowway.com/~zlinuxman/Kernel.htm. It may have some information that you will find useful, even if you use a stock kernel, and especially if you use lilo.I'll give it a look!This new computer is a two-core intel so I assume it is 64 bit but that does not require me to use 64 bits, especially just to get the thing booting normally again. If you could format the mail so that it would be easier to read,you might get some responses. As it it currently formatted as ONE LINE it is, IMHO, just too hard on the eyes. Wayne -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c81185d.30...@gmail.com
Re: Now lost boot dir
On 09/02/2010 12:26 PM, d_ba...@012.net.il wrote: Using the Debian rescue CD, I built a 2.6.34 kernel compiling in more.However, locale issues prevented me from installing it and running lilo.Funny--worked fine last week. I got it to work today. Kernel will still not boot. I am wondering whether to bite the bullet and simply install a stock kernel. Since I need Nouveau, it would needto be a more recent kernel, a 2.6.33,4 or 5. Which is recommended(all are called experimental and many images are simply lacking)?The standard 2.6.32 kernel used by Squeeze (I currently use 2.6.32-5-686 version 2.6.32-20) works fine, and includes the nouveau driver. The nouveau driver seems to work OK in my experience, as long as you don't need interlaced video modes.OK. Does it work with sid xorg-video-nouveau or does it need the version from testing?Heard tell of compatibility problems with various nouveau compilesand its xorg drivers. This would, of course, use th e initrd.I stopped using initrd when the installations ran yaird and this neverworked.Debian has given up on yaird for now. Stock kernels use initramfs-tools, which seems to work fine. I used to use the old mkinitrd and have an obselete conffor it. Now, the update-initramfs serves this. Is this smart enoughto get me running with the newer SATA/PATA drivers (module policydefaults to most)?The 2.6.32-5-686 kernel uses the newer libata drivers. Do I need to specify most everything likein mkinitrd?MODULES=dep in /etc/initramfs-tools/conf.d/driver-policy seems to work fine as long as you don't cross build your initial RAM file systems. I.e. don't build an initial RAM file system for a kernel which uses the old IDE drivers while running a kernel which uses the newer libata drivers, or vice versa.I would run it from the rescue CD which uses the newer libata drivers. (Yaird had a test mode which gave a usable list of whatto include.)If you use the -v switch on update-initramfs it will list the modules that it includes. Can these images be used with lilo or are they alreadytoo large?I don't have any personal experience with the amd64 images, but I can attest that the i386 ones work fine with lilo, especially if you use the large-memory option, and especially if you use MODULES=dep. I don't know if I mentioned this earlier, but you might want to take a look at my kernel-building web page, http://www.wowway.com/~zlinuxman/Kernel.htm. It may have some information that you will find useful, even if you use a stock kernel, and especially if you use lilo.I'll give it a look!This new computer is a two-core intel so I assume it is 64 bit but that does not require me to use 64 bits, especially just to get the thing booting normally again. A HTML mail. That's why it looks so bad. Sorry I don't do HTML mail. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c8118eb.2050...@gmail.com
Genius e-Messenger 112 webcam and gspca_pac207
Hi, on Debian GNU/Linux Squeeze with kernel linux-image-2.6.32-5-amd64 I have setup modules to load in /etc/modules: gspca_main gspca_pac207 videodev v4l1_compat v4l2_compat_ioctl32 but I have /dev/video0 only if I unplug and plug again the USB cable of my webcam. Then I can use my webcam. Why? -- Regards, Paul Chany You can freely correct me in my English. http://csanyi-pal.info -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/87aanyn76d@debian-asztal.excito