Re: Quel outil pour transformer les coordonnées cartographiques ?
voir ogr2ogr du paquet gdal-bin ... Quelqu'un pourrait il me dire s'il existe sous Linux un outil permettant de transformer les coordonnées cartographiques Lambert II + en degrés décimaux de latitude et longitude ? -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c946cc8.1060...@teledetection.fr
Re: freerunner
Le 17/09/2010 à 16:31:40, Mouarf a écrit : Le vendredi 17 septembre 2010 13:10:28, Pierre Allken-Bernard a écrit : Bonjour, Bonjour, J'aimerais installer Debian sur un Freerunner (que j'ai depuis peu). C'est plutôt bien expliqué sur le net, mais on doit supposer le Freerunner connecté à internet, or actuellement je ne sais pas le connecter à l'internet (pas de wifi proposé apparemment). Si quelqu'un est passé par là avec succès, je suis preneur de conseils. Je sais pas si tu veux installer une debian de a à z par toi même, mais jette tout de même un oeil la dessus http://wiki.openmoko.org/wiki/Distributions tu as une liste des distris spécialisée/adaptées ou non, et un certain nombre sont basées sur debian, comme QTmoko. C'est une debian pure et dure avec la couche QTopia pour l'interface.Et ça marche tres bien :) Merci, j'ai installé QTmoko, et c'est en effet très bien ! (sans comparaison avec le système livré au départ) Pierre -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100918074436.ga11...@allken-bernard.org
Re: recherche serveur web
On Fri, Sep 17, 2010 at 02:39:14PM +0200, mess-mate wrote: machines : win32 Tu es sur une liste Debian, ici, hein... Chatoulleux... nouveau venu ? Les anciens le sont moins. Bof, (je me considère comme assez ancien pour répondre ;) ), autant j'ai ignoré la question, autant demander _ici_ quel serveur Web utiliser sur Windows a autant de chance d'apporter une réponse que de de demander comment cuire un steak sur un forum végétarien. C'est clairement pas le bon endroit. Y. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100918101921.gk21...@naryves.com
Renommer récursivement
Bonjour à tous,
J'imagine que cette question a du être maintes fois soulevée mais j'ai
beau googeliser, je ne trouve pas de réponse satisfaisante...
Je dispose d'une grande collection de musique organisée en sous
répertoires (Artiste/Albums/titre ou Artiste/Albums/disque-n/Titre). Or
je voudrais remplacer dans tous les répertoires et fichiers, les espaces
par des underscores.
J'ai tenté : find /opt/audio -exec rename 's/\s+/_/g' {} \;
Mais évidemment, ça me répond /opt/audio/un artiste/un album/ Aucun
fichier ou répertoire de ce type vu que le répertoire un artiste est
devenu un_artiste. J'espère me faire bien comprendre.
Donc je cherche une commande, un script qui pourrait remplacer tous les
espaces en underscores en une seule fois.
Vous auriez ça sous le coude ?
Cordialement,
Nicolas Roudninski
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe
vers debian-user-french-requ...@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org
Archive: http://lists.debian.org/4c94a56f.1070...@tycho.fr
probleme webcam nc10
Bonjour, J'utilise le noyau 2.6.34 sous unstable et la webcam est fréquemment déconnectée. J'ai l'impression que ça vient de l'USB. Est-ce qu'un autre utilisateur a ce pb ? Je crois que je ne l'avais pas sous le noyau 2.6.28. [5.189041] usb 1-8: new high speed USB device using ehci_hcd and address 3 [5.345184] usb 1-8: New USB device found, idVendor=0ac8, idProduct=c326 [5.345275] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [5.345358] usb 1-8: Product: Namuga 1.3M Webcam [5.345432] usb 1-8: Manufacturer: Vimicro Corp. [6.126480] uvcvideo: Found UVC 1.00 device Namuga 1.3M Webcam (0ac8:c326) [6.128523] input: Namuga 1.3M Webcam as /devices/pci:00/:00:1d.7/usb1/1-8/1-8:1.0/input/input8 [6.128775] usbcore: registered new interface driver uvcvideo [6.128861] USB Video Class driver (v0.1.0) [ 30.097869] usb 1-8: USB disconnect, address 3 [ 30.360085] usb 1-8: new high speed USB device using ehci_hcd and address 4 [ 30.429292] hub 1-0:1.0: unable to enumerate USB device on port 8 [ 30.820093] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 30.964079] usb 5-2: not running at top speed; connect to a high speed hub [ 31.003079] usb 5-2: New USB device found, idVendor=0ac8, idProduct=c326 [ 31.003096] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 31.003109] usb 5-2: Product: Namuga 1.3M Webcam [ 31.003118] usb 5-2: Manufacturer: Vimicro Corp. [ 31.008362] uvcvideo: Found UVC 1.00 device Namuga 1.3M Webcam (0ac8:c326) [ 31.013261] input: Namuga 1.3M Webcam as /devices/pci:00/:00:1d.3/usb5/5-2/5-2:1.0/input/input9 [ -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c94a6d0.9080...@free.fr
Re: Renommer récursivemen t
ton commande find, en y ajoutant l'option -depth ... ? -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100918123631.ga3...@chorion.ath.cx
Re: Pause de l' affichage au demarrage
Le vendredi 17 septembre 2010 à 17:55:39, daniel huhardeaux a écrit : […] Ctrl/S est très bien, c' est ce que je cherchai. Maintenant pourquoi SysReq ne fonctionne pas reste un mystère ... Parce que SysRq n’a jamais servi à arrêter un défilement. En revanche, ScrollLock… (= ArrêtDéfilement ou approchant en FR, ne pas confondre avec Pause/Break|Attn) Et, au passage, kernel.sysrq, c’est pour activer la « touche magique » → http://fr.wikipedia.org/wiki/Magic_SysRq_key -- Sylvain Sauvage -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201009181558.29246.sylvain.l.sauv...@free.fr
probleme carte wifi dell latitude E6400
Bonjour, J'ai installé debian version 64 bits sur un dell. J'ai un problème de wifi. Je n'arrive pas a voir le wifi de chez moi. Quand je fais ifconfig -a j'ai vu mon wlan0 par contre qd j'essaie de lui attribuer une adresse manuellement, il me jette avec un message device non configuré. Je suis allé sur le site de dell, il n'y pas de pilotes pour linux. Avez-vous une idee pour resoudre ce probleme? Merci
Re: probleme carte wifi dell latitude E6400
Le 18/09/2010 16:20, Maurice Guerrier a écrit : Bonjour, Bonsoir J'ai installé debian version 64 bits sur un dell. J'ai un problème de wifi. [...] Avez-vous une idee pour resoudre ce probleme? [...] Aller sur bugs.debian.org? par exemple #592971 J' ai la même machine et n' ai plus de wifi depuis quelques mois (SID) -- Daniel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c94eb44.6090...@tootai.net
Re: probleme carte wifi dell latitude E6400
On Saturday 18 September 2010 16:20:32 Maurice Guerrier wrote: Bonjour, J'ai installé debian version 64 bits sur un dell. J'ai un problème de wifi. Je n'arrive pas a voir le wifi de chez moi. Quand je fais ifconfig -a j'ai vu mon wlan0 par contre qd j'essaie de lui attribuer une adresse manuellement, il me jette avec un message device non configuré. Je suis allé sur le site de dell, il n'y pas de pilotes pour linux. Avez-vous une idee pour resoudre ce probleme? Merci Nous donner le résultat de lspci? Thierry -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201009181845.20871.tchate...@free.fr
Fwd: Re: probleme carte wifi dell latitude E6400
Le 18/09/2010 16:20, Maurice Guerrier a écrit : Bonjour, Bonsoir J'ai installé debian version 64 bits sur un dell. J'ai un problème de wifi. [...] Avez-vous une idee pour resoudre ce probleme? [...] Aller sur bugs.debian.org? par exemple #592971 J' ai la même machine et n' ai plus de wifi depuis quelques mois (SID) Pardon, mauvaise lecture. C' est un Inspiron 6400 que j' ai. Parcontre, mon latitude E5510 avec le driver iwlagn fonctionne parfaitement, toujours SID Désolé pour le stress causé ;-) -- Daniel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c94ec9a.9070...@tootai.net
Re: Renommer récursivement
Le Sat, 18 Sep 2010 13:41:35 +0200, Nicolas Roudninski a écrit : Bonjour à tous, Bonsoir, [...] Vous auriez ça sous le coude ? Essaie avec detox, avec quelque chose comme: $ detox -r * Je t'invite à lire man detoxrc où il est dit que l'underscore remplace les caractères suivants : space ` ! @ $ * \ | : ; ' ? / @+ -- Px -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100918195607.1bfed...@lucifer
ISO update 5.0.6
Bonjour la liste, J'ai téléchargé un ISO sur le site Debian, celui de lenny update-5.0.6, et impossible de booter dessus. Il ne semble pourtant pas que l'image soit altérée... Si cela dit quelque chose à quelqu'un. Merci!
Re: Renommer récursivement
Le 18/09/2010 13:41, Nicolas Roudninski a écrit :
Bonjour à tous,
J'imagine que cette question a du être maintes fois soulevée mais j'ai
beau googeliser, je ne trouve pas de réponse satisfaisante...
Je dispose d'une grande collection de musique organisée en sous
répertoires (Artiste/Albums/titre ou Artiste/Albums/disque-n/Titre). Or
je voudrais remplacer dans tous les répertoires et fichiers, les espaces
par des underscores.
J'ai tenté : find /opt/audio -exec rename 's/\s+/_/g' {} \;
Mais évidemment, ça me répond /opt/audio/un artiste/un album/ Aucun
fichier ou répertoire de ce type vu que le répertoire un artiste est
devenu un_artiste. J'espère me faire bien comprendre.
Donc je cherche une commande, un script qui pourrait remplacer tous les
espaces en underscores en une seule fois.
Vous auriez ça sous le coude ?
Cordialement,
Nicolas Roudninski
Le script que j'ai fais n'est pas forcément le plus simple, mais je
l'avais déjà pour une autre tâche et il s'avère que j'ai pu l'adapter
pour renommer des fichiers. La difficulté en fait c'est de travailler
sur plusieurs dossiers sur plusieurs niveaux tout en les renommant.
Le script travaille avec un dossier temporaire dans lequel seront copiés
les fichiers et dossiers renommé pour ensuite être recopiés dans le
dossier d'origine.
Il faut juste éditer les deux premières variables avec le dossier cible
ainsi qu'un dossier temporaire vide (si possible sur la même partition),
et exécuter le script. Tu peux faire un essai sur un dossier de test
avant comprenant des fichiers avec espaces et d'autres sans, mais j'ai
testé et ça fonctionne bien.
#!/bin/bash
#indiquer le dossier à traiter dans cette variable
dir_from=/home/user/dossier/
#indiquer un dossier temporaire
tmp_dir=/home/user/dossier_tmp/
#variable init (ne pas éditer)
array_dir_count1=1
array_dir_count2=0
error=0
dir_array[$array_dir_count2]=$dir_from
dir_to_array[$array_dir_count2]=$tmp_dir
if [ $tmp_dir != ]
then
ls_tmp_dir=`ls ${dir_to_array[$array_dir_count2]}`
if [ $ls_tmp_dir != ]
then
echo Le répertoire temporaire n'est pas vide
error=5
fi
else
echo pas de répertoire temporaire configuré
error=7
fi
if [ ! -w ${dir_to_array[$array_dir_count2]} ]
then
echo Le répertoire temporaire n'est pas accessible en écriture
error=6
fi
until [ ${dir_array[$array_dir_count2]} == ]
do
if [ $error -eq 0 ]
then
ls_dir=`ls ${dir_array[$array_dir_count2]}`
ls_dir=${ls_dir// /}
for file in $ls_dir
do
file_org=${file/// }
file_des=${file///_}
input=${dir_array[$array_dir_count2]}/$file_org
output=${dir_to_array[$array_dir_count2]}/$file_des
if [ -d $input ]
then
echo $input is a directory
dir_array[$array_dir_count1]=$input
dir_to_array[$array_dir_count1]=$output
if [ ! -d $output ]
then
if mkdir $output
then
echo $output created
else
error=4
fi
fi
(( array_dir_count1++ ))
fi
if [ -f $input ]
then
echo $input is a file
if [ -e $output ]
then
output=$output.1
fi
if mv $input $output
then
echo file $input renemaded as $output
else
error=1
fi
fi
done
#incrémente l'array
(( array_dir_count2++ ))
else
echo Error $error
exit $error
fi
done
if [ $error -eq 0 ]
then
if rm -rf $dir_from/*
then
if mv $tmp_dir/* $dir_from/
then
echo Done
else
erro=3
fi
else
error=2
fi
fi
exit $error
Si jamais tu as dans le même dossier deux fichiers ayant le même nom,
mais un avec des underscores et l'autre avec des espaces, le script en
renommera un avec .1 à la fin (par exemple piste_01.ogg et piste
01.ogg deviendront piste_01.ogg et piste_01.ogg.1, avec les dossiers
par contres, les contenues seront fusionnés (par exemple avec deux
dossiers The Doors et The_Doors). Le code utilisé pour remplacer les
espaces dans le script est , change le si tu as des fichiers
contenant quatre arobases dans leur nom (ce qui est peu probable).
Si tu en as la possibilité, fait un backup quand même avant, j'ai bien
testé le script, mais on est pas à l'abri d'une situation d'erreur à
laquelle je n'aurais pas pensé. Et si tu es paranos comme moi et que tu
as l'espace disque suffisant, remplace le mv par un cp à la ligne 71 et
efface ou commente le code entre les lignes 87 et 100 (incluses), tu
auras une copie des fichiers renommés dans le dossier temporaire que tu
pourra vérifier avant d'effacer les autres.
Je joins le script en pièce jointe pour éviter les erreurs de copier coller.
Cordialement
Christophe
#!/bin/bash
#indiquer le dossier à traiter dans cette variable
dir_from=/home/user/dossier/
#indiquer un dossier temporaire
tmp_dir=/home/user/dossier_tmp/
#variable init (ne pas éditer)
array_dir_count1=1
Re: ISO update 5.0.6
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Le 18/09/2010 17:41, cazzaniga.san...@gmail.com a écrit : Bonjour la liste, Salut, J'ai téléchargé un ISO sur le site Debian, celui de lenny update-5.0.6, Comme son nom l'indique, c'est une image de mise à jour. et impossible de booter dessus. Si tu veux une image amorçable, prend plutôt une image d'installation. Amicalement David -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) iEYEARECAAYFAkyVNdEACgkQ18/WetbTC/q9MgCeKc5hXPlv6ZlizWq2GBoLHckS WNYAnRlJBbyWkKzHDSMykAz07/086N68 =dGmz -END PGP SIGNATURE- -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/i73ckj$au...@dough.gmane.org
Re: ISO update 5.0.6
C'est donc ça le soucis.. Enfin, ce n'est pas vrainenr un soucis :) Merci de ton aide! -Original Message- From: David Prévot dav...@altern.org Date: Sat, 18 Sep 2010 17:57:38 To: debian-user-french@lists.debian.org Subject: Re: ISO update 5.0.6 -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Le 18/09/2010 17:41, cazzaniga.san...@gmail.com a écrit : Bonjour la liste, Salut, J'ai téléchargé un ISO sur le site Debian, celui de lenny update-5.0.6, Comme son nom l'indique, c'est une image de mise à jour. et impossible de booter dessus. Si tu veux une image amorçable, prend plutôt une image d'installation. Amicalement David -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) iEYEARECAAYFAkyVNdEACgkQ18/WetbTC/q9MgCeKc5hXPlv6ZlizWq2GBoLHckS WNYAnRlJBbyWkKzHDSMykAz07/086N68 =dGmz -END PGP SIGNATURE- -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/i73ckj$au...@dough.gmane.org
Re: Renommer récursivemen t
Re, On Sat, Sep 18, 2010 at 07:56:07PM +0200, Papinux wrote: Essaie avec detox [...] Excellent. Connaissais pas, merci beaucoup ! A+ -- JFS. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100918230846.ga11...@hohenhole.jfs.dt
Re: Renommer récursivement
Le 18/09/2010 23:47, Goldy a écrit :
Le 18/09/2010 13:41, Nicolas Roudninski a écrit :
Bonjour à tous,
J'imagine que cette question a du être maintes fois soulevée mais j'ai
beau googeliser, je ne trouve pas de réponse satisfaisante...
Je dispose d'une grande collection de musique organisée en sous
répertoires (Artiste/Albums/titre ou Artiste/Albums/disque-n/Titre). Or
je voudrais remplacer dans tous les répertoires et fichiers, les espaces
par des underscores.
J'ai tenté : find /opt/audio -exec rename 's/\s+/_/g' {} \;
Mais évidemment, ça me répond /opt/audio/un artiste/un album/ Aucun
fichier ou répertoire de ce type vu que le répertoire un artiste est
devenu un_artiste. J'espère me faire bien comprendre.
Donc je cherche une commande, un script qui pourrait remplacer tous les
espaces en underscores en une seule fois.
Vous auriez ça sous le coude ?
Cordialement,
Nicolas Roudninski
J'y vais de mon petit script à moi, invoqué seul, il remplace les
espaces par des underscores, invoqué avec un paramètre quelconque, il
remplace les underscores par des espaces.
--
Luc Schimpf
www.au-ptit-bon-air.eu
#! /bin/bash
[ $# -eq 0 ] command=removspace || command=restorspace
echo command = $command
explor () {
for file in $1/*; do
[ -f $file ] $2 $file
[ -d $file ] $2 $file
done
}
removspace () {
a=`echo $1 | tr [:blank:] _`
mv $1 $a /dev/null
[ -d $a ] explor $a removspace
}
restorspace () {
b=$(echo $1 | sed 's/_/ /g')
mv $1 $b /dev/null
[ -d $b ] explor $b restorspace
}
for repert in * ; do
[ -d $repert ] $command $repert
[ -f $repert ] $command $repert
done
Configurar paquete
Tengo 2 problemas o más bien dudas: 1- Instalé Firebird 2.1.4 desde el código fuente (funciona perfecto), pero después instalé flamerobin_0.9.2-2_i386.deb pero me da un error al instalar diciéndome que falta por instalar la librería libfbclient2, la cual si está instalada y aunque da el error funciona perfecto pero synaptic me lo reporta como paquete roto y cada vez que voy a instalar algo me lo desinstala y tengo que estar desinstalando y volviendo a instalar cada vez que quiero configurar algo. Ahora mi pregunta como yo podría ver donde es que me pide poner la librería libfbclient2 para crearle un enlace en ese lugar y así evitarme tener que estar reinstalando a cada rato. 2- Como puedo configurar una aplicación a que se inicie cuando se inicie la sección de usuario, esto lo quiero para que se me inicie automáticamente Pidgin y no tener que estar levantándola cada vez que encienda la Pc. Saludos a to2s = || ISMAEL || = -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1b4e01d0b0f246dbafa94df552842...@virpc05
Re: Configurar paquete
On Fri, Sep 17, 2010 at 08:55:25AM -0400, Ismael L. Donis García wrote: Tengo 2 problemas o más bien dudas: 1- Instalé Firebird 2.1.4 desde el código fuente (funciona perfecto), pero después instalé flamerobin_0.9.2-2_i386.deb pero me da un error al instalar diciéndome que falta por instalar la librería libfbclient2, la cual si está instalada y aunque da el error funciona perfecto pero synaptic me lo reporta como paquete roto y cada vez que voy a instalar algo me lo desinstala y tengo que estar desinstalando y volviendo a instalar cada vez que quiero configurar algo. Ahora mi pregunta como yo podría ver donde es que me pide poner la librería libfbclient2 para crearle un enlace en ese lugar y así evitarme tener que estar reinstalando a cada rato. 2- Como puedo configurar una aplicación a que se inicie cuando se inicie la sección de usuario, esto lo quiero para que se me inicie automáticamente Pidgin y no tener que estar levantándola cada vez que encienda la Pc. Hola, Lo primero, abre un nuevo hilo para hacer una pregunta nueva, Contestar un correo de otro hilo, aunque hayas modificado el asunto, no rompe el hilo original. Segundo, tienes que darnos algo de contexto: ¿qué usas? potato? sarge? :) ¿Alguna razón para compilar la fuente y no instalar el paquete del repo? ¿has usado checkinstall? Para la pregunta, y suponiendo squeeze: http://packages.debian.org/squeeze/i386/libfbclient2/filelist /usr/lib/libfbclient.so.2 /usr/lib/libfbclient.so.2.5.0 /usr/share/doc/libfbclient2 Puedes hacer dpkg -L libfbclient2 para comprobar que sea así. Para la segunda pregunta es necesario saber qué DE usas. Saludos. -- Huella de clave primaria: 0FDA C36F F110 54F4 D42B D0EB 617D 396C 448B 31EB signature.asc Description: Digital signature
Cómo iniciar una aplicación al encender el PC (era: Configurar paquete)
El Fri, 17 Sep 2010 08:55:25 -0400, Ismael L. Donis García escribió: (...) 2- Como puedo configurar una aplicación a que se inicie cuando se inicie la sección de usuario, esto lo quiero para que se me inicie automáticamente Pidgin y no tener que estar levantándola cada vez que encienda la Pc. Si el entorno gráfico que usas se basa en freedesktop, lee este documento: Autostart Of Applications During Startup http://standards.freedesktop.org/autostart-spec/autostart-spec-latest.html#startup En GNOME creo que usan ~/.config/autostart para cada usuario y /etc/xdg/autostart/ para que la aplicación se inicie en todos los usuarios. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.18.10.12...@gmail.com
Ejabberd+AD
Saludos a todos los amigos listeros:
Necesito autenticar mi ejabberd contra un AD corriendo en un Win2003
server.. esto es lo que le pongo:
%% Authentication using LDAP
%%
{auth_method, ldap}.
%%
%% List of LDAP servers:
{ldap_servers, [someip]}.
%%
%% Encryption of connection to LDAP servers (LDAPS):
%%{ldap_encrypt, tls}.
%%
%% Port connect to LDAP server:
{ldap_port, 389}.
%%
%% LDAP manager:
{ldap_rootdn, administra...@x.y.zz}.
%%
%% Password to LDAP manager:
{ldap_password, *}.
%%
%% Search base of LDAP directory:
{ldap_base, dc=x,dc=y,dc=zz}.
%%
%% LDAP attribute that holds user ID:
%%{ldap_uids, [{mail, %...@example.domain.com}]}.
%%
%% LDAP filter:
%%{ldap_filter, (objectClass=shadowAccount)}.
{ldap_uidattr, sAMAccountName}.
Y esto es lo que me da el ejabberd.log
=INFO REPORT 2010-09-17 16:39:13 ===
I(0.270.0:eldap:897) : LDAP connection on someip :389
=INFO REPORT 2010-09-17 16:39:13 ===
I(0.260.0:eldap:897) : LDAP connection on someip:389
=ERROR REPORT 2010-09-17 16:39:13 ===
E(0.260.0:eldap:914) : LDAP connection failed on someip:389
Reason: esslconnect
=ERROR REPORT 2010-09-17 16:39:13 ===
E(0.270.0:eldap:914) : LDAP connection failed on someip:389
Reason: esslconnect
A lo mejor me estoy perdiendo de alguna parte y lo digo porque solo he
agregado en el DNS un alias jabber. a mi server linux. pero no un
record SRV (puede esto influir al menos en el error??? lo cual no creo
porque instale ldap-utils y hago consultas normalmente al AD con
ldapsearch).
Si alguien que lo haya resuelto me puede echar una luz en esta oscuridad que
se me ha levantado delante, le estaria agradecido como un niño al que le
regalan un caramelo.
--
Success in life is a matter no so much of talent and opportunity as of
concentration and perseverance
Re: Ejabberd+AD
Ojalá tengas suerte en eso estube un buen tiempo pero nada no di pie con
bola, solo recuerdo que la primera vez que probé lo hize con una pc Virtual
y resultó pero después de eso me aparté y cuando volví nada de nada.
Espero que tengas suerte, te digo algo solo sé que si trabaja.
Si das con la solución espero tu ayuda
Salu2
Cosme
-Original Message-
From: Mägo de Oz magodeoz.virt...@gmail.com
To: Lista Debian debian-user-spanish@lists.debian.org
Date: Sat, 18 Sep 2010 09:29:57 -0500
Subject: Ejabberd+AD
Saludos a todos los amigos listeros:
Necesito autenticar mi ejabberd contra un AD corriendo en un Win2003
server.. esto es lo que le pongo:
%% Authentication using LDAP
%%
{auth_method, ldap}.
%%
%% List of LDAP servers:
{ldap_servers, [someip]}.
%%
%% Encryption of connection to LDAP servers (LDAPS):
%%{ldap_encrypt, tls}.
%%
%% Port connect to LDAP server:
{ldap_port, 389}.
%%
%% LDAP manager:
{ldap_rootdn, administra...@x.y.zz}.
%%
%% Password to LDAP manager:
{ldap_password, *}.
%%
%% Search base of LDAP directory:
{ldap_base, dc=x,dc=y,dc=zz}.
%%
%% LDAP attribute that holds user ID:
%%{ldap_uids, [{mail, % u...@example.domain.com}]}.
%%
%% LDAP filter:
%%{ldap_filter, (objectClass=shadowAccount)}.
{ldap_uidattr, sAMAccountName}.
Y esto es lo que me da el ejabberd.log
=INFO REPORT 2010-09-17 16:39:13 ===
I(0.270.0:eldap:897) : LDAP connection on someip :389
=INFO REPORT 2010-09-17 16:39:13 ===
I(0.260.0:eldap:897) : LDAP connection on someip :389
=ERROR REPORT 2010-09-17 16:39:13 ===
E(0.260.0:eldap:914) : LDAP connection failed on someip:389
Reason: esslconnect
=ERROR REPORT 2010-09-17 16:39:13 ===
E(0.270.0:eldap:914) : LDAP connection failed on someip:389
Reason: esslconnect
A lo mejor me estoy perdiendo de alguna parte y lo digo porque solo he
agregado en el DNS un alias jabber. a mi server linux. pero no un
record SRV (puede esto influir al menos en el error??? lo cual no creo
porque instale ldap-utils y hago consultas normalmente al AD con
ldapsearch).
Si alguien que lo haya resuelto me puede echar una luz en esta oscuridad que
se me ha levantado delante, le estaria agradecido como un niño al que le
regalan un caramelo.
--
Success in life is a matter no so much of talent and opportunity as of
concentration and perseverance
Re: Ejabberd+AD
On Sat, 18 Sep 2010, Mägo de Oz wrote:
Saludos a todos los amigos listeros:
Necesito autenticar mi ejabberd contra un AD corriendo en un Win2003
server.. esto es lo que le pongo:
%% Authentication using LDAP
%%
{auth_method, ldap}.
%%
%% List of LDAP servers:
{ldap_servers, [someip]}.
%%
%% Encryption of connection to LDAP servers (LDAPS):
%%{ldap_encrypt, tls}.
%%
%% Port connect to LDAP server:
{ldap_port, 389}.
%%
%% LDAP manager:
{ldap_rootdn, administra...@x.y.zz}.
%%
%% Password to LDAP manager:
{ldap_password, *}.
%%
%% Search base of LDAP directory:
{ldap_base, dc=x,dc=y,dc=zz}.
%%
%% LDAP attribute that holds user ID:
%%{ldap_uids, [{mail, %...@example.domain.com}]}.
%%
%% LDAP filter:
%%{ldap_filter, (objectClass=shadowAccount)}.
{ldap_uidattr, sAMAccountName}.
Y esto es lo que me da el ejabberd.log
Me imagino que has intentado utilizar los ejemplos de los
manuales:
http://www.process-one.net/en/ejabberd/guide_en#ad
porque algunas opciones difieren (ldap_filter). Utiliza también
registros de DNS o alias del '/etc/hosts' en vez de IPes (ldap_servers),
porque algunos programas son muy suyos con el tratamiento de estas.
=INFO REPORT 2010-09-17 16:39:13 ===
I(0.270.0:eldap:897) : LDAP connection on someip :389
=INFO REPORT 2010-09-17 16:39:13 ===
I(0.260.0:eldap:897) : LDAP connection on someip:389
=ERROR REPORT 2010-09-17 16:39:13 ===
E(0.260.0:eldap:914) : LDAP connection failed on someip:389
Reason: esslconnect
=ERROR REPORT 2010-09-17 16:39:13 ===
E(0.270.0:eldap:914) : LDAP connection failed on someip:389
Reason: esslconnect
A lo mejor me estoy perdiendo de alguna parte y lo digo porque solo he
agregado en el DNS un alias jabber. a mi server linux. pero no un
record SRV (puede esto influir al menos en el error??? lo cual no creo
porque instale ldap-utils y hago consultas normalmente al AD con
ldapsearch).
Si alguien que lo haya resuelto me puede echar una luz en esta oscuridad que
se me ha levantado delante, le estaria agradecido como un niño al que le
regalan un caramelo.
Siento no poder ayudar más, pero nunca he montado una
configuración parecida, pero intuyo que en sus foros es posible te
alumbren con más fuerza:
http://www.ejabberd.im/forum
http://www.ejabberd.im/forum/es
--
Saludos --- Angel
Re: ext4
2010/9/17 Adauto Serpa adautose...@gmail.com: Se não me engano quando estava testando o Ext4 eu utilizei esse tutorial abaixo: https://ext4.wiki.kernel.org/index.php/Ext4_Howto Outra coisa você consegue montar a partição com o comando sudo mount -t ext4 /dev/ /mnt ? abs, Adauto Serpa Olá, Sim consigo mountar sistema de ficheiros ext4, já utilizo no home, usr, tmp e var. Correu mal :) foi com a raiz e a boot por causa do grub. Mesmo com o cdrom de instalação do squeeze se optar por criar todo o sistema em ext4 ele dá um erro quando chega ao ponto de instalar o grub. Abraço, Silvino -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlkti=h7pgzhkrjpvpogve7j3g7cnkqtwcyffpy_...@mail.gmail.com
Xen usar partição existente
Pessoal, Estou estudando um pouco sobre o Xen e achei ele bem interessante, porém ainda estou com algumas dúvidas e recorro a vocês. A máquina que vou utilizar é meu notebook e acho que não suporta virtualização por hardware, vai funcionar bem o Xen ou vai ficar com o desempenho muito inferior ao Virtualbox ou VmWare ? Posso utilizar uma partição do Windows já instalado ? Pelo que li pode ser usado um arquivo de imagem ou uma partição(/dev) para montar máquinas virtuais. obrigado ! -- Adauto Serpa Tecnólogo em Informática Jabber: adautose...@jabber.org Email: adautose...@gmail.com MSN: junio...@hotmail.com -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktinouyrzbp1cbnahhbogjdcy6vnte4u81oy2g...@mail.gmail.com
Re: ext4
Silvino, A imagem do seu Squeeze é atual ? Porque no inicio eu também tive problemas para formatar um sistema do zero com Ext4. abs, Adauto Serpa Em 18 de setembro de 2010 08:48, Debiminho debimi...@gmail.com escreveu: 2010/9/17 Adauto Serpa adautose...@gmail.com: Se não me engano quando estava testando o Ext4 eu utilizei esse tutorial abaixo: https://ext4.wiki.kernel.org/index.php/Ext4_Howto Outra coisa você consegue montar a partição com o comando sudo mount -t ext4 /dev/ /mnt ? abs, Adauto Serpa Olá, Sim consigo mountar sistema de ficheiros ext4, já utilizo no home, usr, tmp e var. Correu mal :) foi com a raiz e a boot por causa do grub. Mesmo com o cdrom de instalação do squeeze se optar por criar todo o sistema em ext4 ele dá um erro quando chega ao ponto de instalar o grub. Abraço, Silvino -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktih7pgzhkrjpvpogve7j3g7cnkqtwcyffpy_...@mail.gmail.com -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktimcx0u6kfaoq0rf4hqdp2ujowygzu2i5kbpb...@mail.gmail.com
Re: erro no postgis - could not load library /opt/pgsql/lib/postgis-1.5.so
On Saturday 18 September 2010 02:27:42 Sorocaos . wrote: instalei primeiro o postgresql8.4 e depois o postgis1.5, e todas lib ficou em /opt/pgsql/lib $ ls /opt/pgsql/lib/postgis* /opt/pgsql/lib/postgis-1.5.so esta lá mas se tento rodar um : pg...@micro$ /opt/pgsql/bin/psql -f share/contrib/postgis-1.5/postgis.sql --port=5800 --host=localhost -d geomapas WARNING: nonstandard use of \\ in a string literal at character 263 HINT: Use the escape string syntax for backslashes, e.g., E'\\'. FATAL: database pgsql does not exist FATAL: database maas does not exist *ERROR: could not load library /opt/pgsql/lib/postgis-1.5.so: /opt/pgsql/lib/postgis-1.5.so: undefined symbol: GEOSHausdorffDistance* STATEMENT: CREATE OR REPLACE FUNCTION st_spheroid_in(cstring) RETURNS spheroid AS '$libdir/postgis-1.5','ellipsoid_in' LANGUAGE 'C' IMMUTABLE STRICT; ERROR: current transaction is aborted, commands ignored until end of transaction block STATEMENT: CREATE OR REPLACE FUNCTION st_spheroid_out(spheroid) RETURNS cstring tenho que fazer ldconfig /opt/pgsql/lib pra rodar ok? como faço que lib que estão ali seja usadas perfeitamente? isso esta sobre um debian lenny. Opa tchê, tudo beleza? Tens algum motivo em específico pra não usar o postgresql 8.4 e o postgis 1.5 do repositório lenny-backports ? http://packages.debian.org/lenny-backports/postgis http://packages.debian.org/lenny-backports/postgresql Sobre esse erro, já tentou editar o arquivo '/etc/ld.so.conf', colocar o diretório '/opt/pgsql/lib' e depois rodar o ldconfig de novo? [ ]'s e boa sorte. -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009181729.52358.fcann...@gmail.com
Re: software para videoconferência
não acredito muito nisso, uma coisa é aplicativo outra é sistema operacional. tem aplicativos que por não se codigo aberto não tem pra todos sistemas. mas bem. https://www.ekiga.net/ http://mumble.sourceforge.net/Main_Page conferencia com varias pessoas e com áudio e vídeo? tem que ver que procura, achar os aplicativos e ver se tem pra todos as plataformas ou codigo aberto pra poder rodar no sistema que quer.
Re: erro no postgis - could not load library /opt/pgsql/lib/postgis-1.5.so
já estou com postgresql8.3 rodando instalado via apt-get install o postgresql8.4 no /opt/pgsql e o postgresql9.0.rc1 /opt/pgsql9rc1 e todos com postgis...e portas diferentes...então tenho pois estou usando pra geo/gis. no phppgadmin esta ate configurado os 3 postgresql listados lá. hoje prestei mais atenção ao INSTALL do fonte. -- Post-Installation Setup Shared Libraries On some systems with shared libraries you need to tell the system how to find the newly installed shared libraries. The systems on which this is *not* necessary include BSD/OS, FreeBSD, HP-UX, IRIX, Linux, NetBSD, OpenBSD, Tru64 UNIX (formerly Digital UNIX), and Solaris. The method to set the shared library search path varies between platforms, but the most widely-used method is to set the environment variable LD_LIBRARY_PATH like so: In Bourne shells (sh, ksh, bash, zsh): *LD_LIBRARY_PATH=/usr/local/pgsql/lib export LD_LIBRARY_PATH* or in csh or tcsh: *setenv LD_LIBRARY_PATH /usr/local/pgsql/lib* Replace /usr/local/pgsql/lib with whatever you set --libdir to in step 1. You should put these commands into a shell start-up file such as */etc/profile or ~/.bash_profile*. Some good information about the caveats associated with this method can be found at http://xahlee.org/UnixResource_dir/_/ldpath.html. On some systems it might be preferable to set the environment variable LD_RUN_PATH *before* building. On Cygwin, put the library directory in the PATH or move the .dll files into the bin directory. If in doubt, refer to the manual pages of your system (perhaps ld.so or rld). If you later get a message like: psql: error in loading shared libraries libpq.so.2.1: cannot open shared object file: No such file or directory then this step was necessary. Simply take care of it then. If you are on BSD/OS, Linux, or SunOS 4 and you have root access you can run: */sbin/ldconfig /usr/local/pgsql/lib* (or equivalent directory) after installation to enable the run-time linker to find the shared libraries faster. Refer to the manual page of ldconfig for more information. On FreeBSD, NetBSD, and OpenBSD the command is: */sbin/ldconfig -m /usr/local/pgsql/lib* instead. Other systems are not known to have an equivalent command. -- alem disso tenho criado grupo e usuario pra rodar cada postgresql diferente: *groupadd pgsql9 useradd -g pgsql9 -s /bin/sh -d /opt/pgsql9rc1/ pgsql9* mas o chato é que fica com senha se colocar --disabled-password *useradd -g pgsql9 -s /bin/sh -d /opt/pgsql9rc1/ pgsql9 --disabled-password* seria o mais correto? outra viagem que me veio a foi a seguinte: -s /bin/sh por um /bin/pgsql9 com *LD_LIBRARY_PATH=/opt/pgsql9rc1/lib export LD_LIBRARY_PATH *pra cada versão de postgresql e postgis que estou usando seria melhor? se colocar este caminhos de cada postgresql/postgis dentro do mesmo /bin/sh não pode ter risco de dar problemas com libs?* * valeu pela respostas. 2010/9/18 Fabricio Cannini fcann...@gmail.com On Saturday 18 September 2010 02:27:42 Sorocaos . wrote: instalei primeiro o postgresql8.4 e depois o postgis1.5, e todas lib ficou em /opt/pgsql/lib $ ls /opt/pgsql/lib/postgis* /opt/pgsql/lib/postgis-1.5.so esta lá mas se tento rodar um : pg...@micro$ /opt/pgsql/bin/psql -f share/contrib/postgis-1.5/postgis.sql --port=5800 --host=localhost -d geomapas WARNING: nonstandard use of \\ in a string literal at character 263 HINT: Use the escape string syntax for backslashes, e.g., E'\\'. FATAL: database pgsql does not exist FATAL: database maas does not exist *ERROR: could not load library /opt/pgsql/lib/postgis-1.5.so: /opt/pgsql/lib/postgis-1.5.so: undefined symbol: GEOSHausdorffDistance* STATEMENT: CREATE OR REPLACE FUNCTION st_spheroid_in(cstring) RETURNS spheroid AS '$libdir/postgis-1.5','ellipsoid_in' LANGUAGE 'C' IMMUTABLE STRICT; ERROR: current transaction is aborted, commands ignored until end of transaction block STATEMENT: CREATE OR REPLACE FUNCTION st_spheroid_out(spheroid) RETURNS cstring tenho que fazer ldconfig /opt/pgsql/lib pra rodar ok? como faço que lib que estão ali seja usadas perfeitamente? isso esta sobre um debian lenny. Opa tchê, tudo beleza? Tens algum motivo em específico pra não usar o postgresql 8.4 e o postgis 1.5 do repositório lenny-backports ? http://packages.debian.org/lenny-backports/postgis http://packages.debian.org/lenny-backports/postgresql Sobre esse erro, já tentou editar o arquivo '/etc/ld.so.conf', colocar o diretório '/opt/pgsql/lib' e depois rodar o ldconfig de novo? [
Re: Iceape/Seamonkey and Iceweasel/Firefox - was Re: Straw poll: What browser do you use?
On a slightly (more) off-topic question - does any one know how fnord Ubuntu gets around the Mozilla Corp. restrictions with Firefox? I know that Ubuntu's Firefox install comes with an addon named Ubuntu Firefox Modifications - I assume they just use that for all their changes. IIRC the FF branding is also in a seperate package.
Re: Debian VServer in Germany
On Sb, 18 sep 10, 01:21:32, Klistvud wrote: Dne, 17. 09. 2010 23:12:29 je Andrei Popescu napisal(a): Just out of curiosity, how would you tell you haven't lost e-mail? Assumptions that the sender will retry do not count[1] ;) Dead simple -- accompany every mail with a signture, such as: *In case you never receive this mail, please notify me immediately* LOL Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Re: wireless quits every few hours
On Vi, 17 sep 10, 16:30:06, John wrote: Hardware: IBM T30 laptop with internal Cisco Airo type of wireless card. In other words, support is built into the kernel. Please post the relevant line from 'lspci' So, question 1, what happens during reboot, that doesn't happen during ifdown/ ifup Loading the module ;) Or, putting it another way, what can I type from the command line to do the same network restart as if I was rebooting. Remove and reinsert the module. This works for me with iwlagn (on recent firmware versions the wireless can disconnect under heavy loads, it works fine otherwise) Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Re: Iceape/Seamonkey and Iceweasel/Firefox - was Re: Straw poll: What browser do you use?
On 18/09/10 12:52, Bret Busby wrote: On Fri, 17 Sep 2010, Scott Ferguson wrote: (a pyrrhic victory!) What? Rebirth from the ashes - Phoenix had complications so Firefox was chosen to symbolise the victorious rebirth of, um, - the spirit/ghost of Netscape(?). Supposedly the revenge of Netscape on fnord Microsoft. (anecdote) The story of the rising from the ashes (the nature of a phoenix), is unrelated to a Pyrrhic Victory. A Pyrrhic Victory is when one side wins a battle but loses the war. fnord Microsoft drives Netscape out of business to give greater market share to IE. Netscape releases source code which eventually contributes to IE losing market share... to which it could be said - that another such victory (by Microsoft) would bring them undone. I'm paraphrasing Another such victory and I am undone. - which is (one of) the quotes attributed to Pyrrhus. Disclaimer:- if I'm right it's because I remember the quotes of others correctly. Not trying to be argumentative - just trying to give the correct meaning of the term Pyrrhic Victory. No offence or argument taken. A little learning is a dangerous thing. Drink deep, or drink not, from the Pierian Spring - Alexander Pope; An Essay On Criticsm (1709) ( More official (?) version: A little learning is a dangerous thing; drink deep, or taste not the Pierian spring: there shallow draughts intoxicate the brain, and drinking largely sobers us again. ) We're going back 30+ years, but, when I was studying (and I don't remember much Pope) we had to learn the Satyricon (a little earlier than Pope), and this much I do remember This is the armour of genius–, Drink deep or taste not the Pierian spring, Only then pour out your heart (apropos of nothing). Either way - Macedonia is a hell of a long way from the USA ;-p -- Bret Busby Armadale West Australia .. So once you do know what the question actually is, you'll know what the answer means. - Deep Thought, Chapter 28 of Book 1 of The Hitchhiker's Guide to the Galaxy: A Trilogy In Four Parts, written by Douglas Adams, published by Pan Books, 1992 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c945d23.70...@gmail.com
wireless quits every few hours
On Sat, Sep 18, 2010 at 2:30 AM, Andrei Popescu andreimpope...@gmail.com wrote: Please post the relevant line from 'lspci' At the moment, it's still working, but here's the line from lspci: 02:02.0 Network controller: AIRONET Wireless Communications Cisco Aironet Wireless 802.11b -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlkti=ymspcdqug5uz_=ohhrh64znht2=sdkjh2n...@mail.gmail.com
Re: wireless quits every few hours
On Sat, Sep 18, 2010 at 3:25 AM, John nesre...@gmail.com wrote: On Sat, Sep 18, 2010 at 2:30 AM, Andrei Popescu andreimpope...@gmail.com wrote: Please post the relevant line from 'lspci' At the moment, it's still working, but here's the line from lspci: 02:02.0 Network controller: AIRONET Wireless Communications Cisco Aironet Wireless 802.11b Ok, Andrei, I finally get it now. I just removed the module called airo from the kernel (networking died), and replaced it, and did the networking start thing and, indeed, the networking came back to life. If that works when I run into the random network death, I can quickly revive things. Thanks. I wonder why the linux driver for one of the oldest standard wifi cards (Cisco aironet) doesn't work properly, but Windows does. Don't see that too often. John -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikzsnp0omvm1_jwqzqpgkffnnpa81yimyckh...@mail.gmail.com
Re: Does the HDCP crack have any implications for Debian?
On Sat, 18 Sep 2010 10:51:21 +1000 Scott Ferguson prettyfly.producti...@gmail.com wrote: The key is legitimate (confirmed by Intel) - what has been misreported is that the key is used for encrypting the contents of the disk... the disks are encrypted using AACS, it's the stream from the player to the screen that is encrypted with HDCP. The key (I want it printed on a bedsheet) is most likely to turn up in a FPGA board, to be used by people wanting to rip the stream (need fast RAID and a few TB of space). You would need around about 1TB of space for 1 movie uncompressed and the FPGA/raid would need to be able to sustain around about 120-200MB/s. So it would need to be a highend FPGA/Raid, but the whole thing could probs be had for around about £1000 + disks. -- Regards, Angus Hedger Debian GNU/Linux User PGP Public Key 0xEE6A4B97 signature.asc Description: PGP signature
Re: Printing Long Edge (Standard) with HP DeskJet 990C - CUPS+Gutenprint v5.0.2 does not work
On Fri, 17 Sep 2010 21:20:39 +0200, Merciadri Luca wrote: Amongst two printers, I've got an Hp Deskjet 990Cxi, and I use `CUPS+Gutenprint v5.0.2' as a driver for this printer. I would like to print both sides, e.g. using long edge mode (standard). The problem is that this seems not to be communicated to the printer, despite of the invokated command: == lpr -P Deskjet -o Resolution=300dpi -o PageSize=Letter -o Duplex=DuplexNoTumble == The command above lacks the file/document to print? :-? where `Deskjet' is the name of the printer for CUPS. Any idea? You can first check that duplex printing is an available option for your driver: *** lpoptions -p printername -l | grep -i duplex *** If it is listed there and you get no output when calling lpr, take a look into CUPS logs (/var/log/cups/*), maybe there is any error there. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.18.09.29...@gmail.com
Re: Does the HDCP crack have any implications for Debian?
On 18/09/10 19:10, Angus Hedger wrote: On Sat, 18 Sep 2010 10:51:21 +1000 Scott Ferguson prettyfly.producti...@gmail.com wrote: The key is legitimate (confirmed by Intel) - what has been misreported is that the key is used for encrypting the contents of the disk... the disks are encrypted using AACS, it's the stream from the player to the screen that is encrypted with HDCP. The key (I want it printed on a bedsheet) is most likely to turn up in a FPGA board, to be used by people wanting to rip the stream (need fast RAID and a few TB of space). You would need around about 1TB of space for 1 movie uncompressed and the FPGA/raid would need to be able to sustain around about 120-200MB/s. So it would need to be a highend FPGA/Raid, but the whole thing could probs be had for around about £1000 + disks. -- Regards, Angus Hedger Debian GNU/Linux User PGP Public Key 0xEE6A4B97 Agreed (though I've no idea what a UK (?) pound is worth. 1920 x 1080 x 24 bits per pixel x 24 fps = 145MB/sec (not allowing for audio) I suspect there would only be two types of user for the key - vendors of home entertainment systems might become a market (though they already use a system to bypass restrictions on projectors), and commercial pirating operations (the ones who actually press disks). Though the articles I've read all talk about pirates I suspect the reporters are just *cough* wrong (pre-release pirate material is copied from studio prior to encryption). I recall reading an article by a Google engineer where he spoke of a (Linux) system using multiple off-the-shelf computers with software (?) RAID to achieve near-RAM speed disk access - and an evaluation FPGA card from www.xilinx.com is fairly cheap... With reference to the original posters question - maybe, just maybe, the key might become part of a driver to allow any display to display a stream from a blueray player... but I won't be writing it. I'm very happy with the performance I get by simply copying the bluerays I buy to hard drive, and I prefer keep my media on hdd. Cheers -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c948ca2.9070...@gmail.com
Re: RS232-to-USB adapter with dial-up modem
On Fri, 17 Sep 2010 13:28:52 -0700, S D wrote: --- On Fri, 9/17/10, Camaleón wrote: Nonthing special. Well, just that you can establish a dialog with your modem by sending AT commands and even place calls. And minicom is perfect for that :-) (...) Tried minicom. Minicom doesn't seem to allow me to type any commands and seemingly responds only to Ctrl A Z. Here's what I see when minicom starts. Welcome to minicom 2.3 OPTIONS: I18n Compiled on Feb 24 2008, 16:35:15. Port /dev/ttyUSB0 Press CTRL-A Z for help on special keys Any ideas? Thanks Before you throw out your adapater :-), just be sure you cannot even communicate with minicom. It's years since I've not played with minicom, but IIRC, it required to be properly setup before running commands (minicom -s). Take a look into this manual and if you still fail to dialog with your modem, just look for a replacement: http://www.linux.org/docs/ldp/howto/Remote-Serial-Console-HOWTO/modem-minicom.html Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.18.10.00...@gmail.com
Re: wireless quits every few hours
On Sat September 18 2010, John wrote: Ok, Andrei, I finally get it now. I just removed the module called airo from the kernel (networking died), and replaced it, and did the networking start thing and, indeed, the networking came back to life. I have had a similar problem in the past.. but I'm not aware of how to load/unload these modules. Could you explain exactly what you did?? If that works when I run into the random network death, I can quickly revive things. Thanks. thanks -- Paul Cartwright Registered Linux user # 367800 Registered Ubuntu User #12459 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009180633.32735.deb...@pcartwright.com
Re: Printing Long Edge (Standard) with HP DeskJet 990C - CUPS+Gutenprint v5.0.2 does not work
Camaleón wrote: On Fri, 17 Sep 2010 21:20:39 +0200, Merciadri Luca wrote: Amongst two printers, I've got an Hp Deskjet 990Cxi, and I use `CUPS+Gutenprint v5.0.2' as a driver for this printer. I would like to print both sides, e.g. using long edge mode (standard). The problem is that this seems not to be communicated to the printer, despite of the invokated command: == lpr -P Deskjet -o Resolution=300dpi -o PageSize=Letter -o Duplex=DuplexNoTumble == The command above lacks the file/document to print? :-? Well, this is what Adobe indicates me as the sent command. I assume it appends the name of the stuff to print! where `Deskjet' is the name of the printer for CUPS. Any idea? You can first check that duplex printing is an available option for your driver: *** lpoptions -p printername -l | grep -i duplex *** == # lpoptions -p printername -l | grep -i duplex Duplex/2-Sided Printing: *None DuplexNoTumble DuplexTumble == If it is listed there and you get no output when calling lpr, take a look into CUPS logs (/var/log/cups/*), maybe there is any error there Calling `lpr' gives simply nothing, but a blinking cursor. I checked log files, but there seems to be nothing indicated, be it in error_log*, page_log*, access_log*. -- Merciadri Luca See http://www.student.montefiore.ulg.ac.be/~merciadri/ I use PGP. If there is an incompatibility problem with your mail client, please contact me. It pays to pay attention. signature.asc Description: OpenPGP digital signature
Mini system...What image to use?
Hi, I'm looking at buying a mini system with a VIA 1.5 GHz C7 processor (VIA CN700 northbridge VIA VT8237RP high bandwith vlink client southbridge). The debian site doesn't mention this processor. What image would I use to install debian on this system? Thanks, Mark -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009180731.35561.m...@neidorff.com
test
test -- bye, pabs http://wiki.debian.org/PaulWise -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1284809607.7334.35.ca...@chianamo
Re: Mini system...What image to use?
Hi, The debian site mentions i386, the net mentions the Via C7 is an x86. Try netinst, or maybe DamnSmallLinux or another microdistro. Bye -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktimxhidg_q81dtuv-q=r7vxhldvmjprdmat1a...@mail.gmail.com
Re: Mini system...What image to use?
On 18/09/10 21:31, Mark Neidorff wrote: Hi, I'm looking at buying a mini system with a VIA 1.5 GHz C7 processor (VIA CN700 northbridge VIA VT8237RP high bandwith vlink client southbridge). The debian site doesn't mention this processor. What image would I use to install debian on this system? Thanks, Mark image? your choice - I suspect you mean architecture... it's i386. Nice little board. Cheers -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c94a829.5050...@gmail.com
Re: test
On Sat, Sep 18, 2010 at 12:33, Paul Wise p...@debian.org wrote: test -- bye, pabs http://www.debian.org/MailingLists/#codeofconduct - point 4. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlkti=m9ivg+uz9rfa5akxoiakfl-kfsud=_ddw_...@mail.gmail.com
Re: Debian VServer in Germany
Andrei Popescu on 18/09/10 07:17, wrote: On Sb, 18 sep 10, 01:21:32, Klistvud wrote: Dne, 17. 09. 2010 23:12:29 je Andrei Popescu napisal(a): Just out of curiosity, how would you tell you haven't lost e-mail? Assumptions that the sender will retry do not count[1] ;) Dead simple -- accompany every mail with a signture, such as: *In case you never receive this mail, please notify me immediately* LOL Regards, Andrei I received a manual virus recently. It told me to delete all the files on my harddrive, and then forward it to all my contacts. Fortunately I realised, and didn't do it. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c94a9b1.8000...@cyberspaceroad.com
Re: Debian VServer in Germany
On 18/09/10 21:59, Adam Hardy wrote: Andrei Popescu on 18/09/10 07:17, wrote: On Sb, 18 sep 10, 01:21:32, Klistvud wrote: Dne, 17. 09. 2010 23:12:29 je Andrei Popescu napisal(a): Just out of curiosity, how would you tell you haven't lost e-mail? Assumptions that the sender will retry do not count[1] ;) Dead simple -- accompany every mail with a signture, such as: *In case you never receive this mail, please notify me immediately* LOL Regards, Andrei I received a manual virus recently. It told me to delete all the files on my harddrive, and then forward it to all my contacts. Fortunately I realised, and didn't do it. Damn. I tried following the same instructions, but couldn't get the icedove to start for the forwarding step First thing tomorrow I'm adding the suggested signature to all my accounts. Thanks :-D -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c94ab16.6040...@gmail.com
Re: wireless quits every few hours
On Sat, Sep 18, 2010 at 6:33 AM, Paul Cartwright deb...@pcartwright.com wrote: On Sat September 18 2010, John wrote: Ok, Andrei, I finally get it now. I just removed the module called airo from the kernel (networking died), and replaced it, and did the networking start thing and, indeed, the networking came back to life. I have had a similar problem in the past.. but I'm not aware of how to load/unload these modules. Could you explain exactly what you did?? Sure. I figured out what the module is called by doing: lsmod For my wireless card, the module is called airo Remove the module, add the module back, and (re)start the network: modprobe -r airo modprobe -a airo /etc/init.d/networking start I'm on another machine right now so I'm going by memory; let me know if that doesn't work. John -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikn3u9smzl-xn0s+nj+dsap6ybu1vfdveqx-...@mail.gmail.com
Re: test
On 18.09.2010 13:53, Nuno Magalhães wrote: On Sat, Sep 18, 2010 at 12:33, Paul Wisep...@debian.org wrote: test -- bye, pabs http://www.debian.org/MailingLists/#codeofconduct - point 4. What if he was not determining if the client was working ? Maybe a change in that point ( #6 ) is required. d -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/blu0-smtp19064a711f515c80ee2e482dc...@phx.gbl
Re: Proposed Fluxbox style for Debian
Hi All, I have done some more work and now have 2 styles going so people can choose either the light or the dark. All can be found on the wiki[1] at the the usual place. Comments and/or suggestions more than welcome :-) Regards Dale [1] http://wiki.debian.org/DebianArt/Themes/Debian_LibStick On 17 September 2010 14:01, Dale quail.li...@gmail.com wrote: Hi All, I have done some fixing and theses are the fixes I have done, * Fixed the fade on the menu * Adjusted toolbar, window title bar, menu bar heights from 14 to 18 * Adjusted font sizes to suit. I have also added and overlay example to the wiki page[1] of some overrides to the theme, and updated the screenshots. Comments and/or suggestions more than welcome Regards Dale [1] http://wiki.debian.org/DebianArt/Themes/Debian_LibStick On 16 September 2010 18:35, Dale quail.li...@gmail.com wrote: Hi All, I have been working on a new Fluxbox style[1] for Debian and hopefully come the default theme for a release like squeeze, or the next the next Debian release. Comments and/or suggestions more than welcome Regards Dale [1] http://wiki.debian.org/DebianArt/Themes/Debian_LibStick -- [WWW] http://quail.southernvaleslug.org/ The significant problems we face cannot be solved at the same level of thinking we were at when we created them - Albert Einstein -- [WWW] http://quail.southernvaleslug.org/ The significant problems we face cannot be solved at the same level of thinking we were at when we created them - Albert Einstein -- [WWW] http://quail.southernvaleslug.org/ The significant problems we face cannot be solved at the same level of thinking we were at when we created them - Albert Einstein -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktik=q6dumwmvq+t7a1z5zm9uhpqaranwbd4bz...@mail.gmail.com
Re: wireless quits every few hours
On Sat September 18 2010, John wrote: Sure. I figured out what the module is called by doing: lsmod For my wireless card, the module is called airo Remove the module, add the module back, and (re)start the network: modprobe -r airo modprobe -a airo /etc/init.d/networking start that sounds about right, thanks! -- Paul Cartwright Registered Linux user # 367800 Registered Ubuntu User #12459 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009180939.27980.deb...@pcartwright.com
Re: RS232-to-USB adapter with dial-up modem
Camaleón wrote: Before you throw out your adapater :-), just be sure you cannot even communicate with minicom. It's years since I've not played with minicom, but IIRC, it required to be properly setup before running commands (minicom -s). Take a look into this manual and if you still fail to dialog with your modem, just look for a replacement: I'd echo that. If you don't have your bit rate, parity, and stop bits set right, there's a very good chance that nothing you type will get any response. Some pieces of the chain may auto-adapt, but as long as one step doesn't, things won't work. Miles -- In theory, there is no difference between theory and practice. Infnord practice, there is. Yogi Berra -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c94c4ee.4000...@meetinghouse.net
Blu-ray status in Linux (was: Does the HDCP crack have any implications for Debian?)
On Fri, 17 Sep 2010 22:29:49 +0100, Angus Hedger wrote: On Fri, 17 Sep 2010 16:12:47 -0500 Mark Allums wrote: (...) I'm not interested in that, but I wondered if that meant that we would eventually be able to play Blu-Ray on Debian machines. Do you suppose we will see Blu-Ray support in VLC anytime soon? (...) It means that BR playback on linux is closer, for example windows has a protected content layer that passes the content from the player to the screen, with this key you could build something like that for windows. Mmmm, just out of curiosity (as I don't own a BD player neither have Blu- ray discs to play) but, do you mean there is currently no way to play Blu- ray in Linux? :-? Or just to put it in other words, what is the current status of the Blu- ray technology in Linux? It seems there is a project¹ that allows viewing such media type, but does it work nice, has any drawbacks...? ¹ http://themediaviking.com/software/bluray-linux/ Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.18.14.39...@gmail.com
ANSWERED Re: Mini system...What image to use?
On Saturday 18 September 2010 07:53 am, Scott Ferguson wrote: I'm looking at buying a mini system with a VIA 1.5 GHz C7 processor (VIA CN700 northbridge VIA VT8237RP high bandwith vlink client southbridge). The debian site doesn't mention this processor. What image would I use to install debian on this system? image? your choice - I suspect you mean architecture... it's i386. Nice little board. Thanks. Exactly what I needed to know. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009181055.16383.m...@neidorff.com
Re: searching inside files with find, cat and grep as a oneliner ...
On Fri, Sep 17, 2010 at 11:07:53PM -0600, Bob Proulx wrote:
Albretch Mueller wrote:
But newer POSIX standard find can use a {} + to launch grep once and
to pass as many files on the command line as the system allows. That
is faster since grep is launched only as many times as needed.
Usually only once.
$ find -name '*.extension' -exec grep -H 'pattern' {} +
Wow! I thought that such things can be done only by xargs. Thank you very much!
--
Regards,
Alexander Batischev
1024D/69093C81
F870 A381 B5F5 D2A1 1B35 4D63 A1A7 1C77 6909 3C81
signature.asc
Description: Digital signature
Re: Debian VServer in Germany
Adam Hardy writes: I received a manual virus recently. It told me to delete all the files on my harddrive, and then forward it to all my contacts. Fortunately I realised, and didn't do it. Wouldn't have worked anyway as it contains an obvious bug. -- John Hasler -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/877hijyu7o@thumper.dhh.gt.org
Re: wireless quits every few hours
John wrote: I wonder why the linux driver for one of the oldest standard wifi cards (Cisco aironet) doesn't work properly, but Windows does. Don't see that too often. John If there is room for experimentation, I'd install a newer kernel and see if the problem goes away. -- Kamaraju S Kusumanchi http://malayamaarutham.blogspot.com/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/i72lua$he...@dough.gmane.org
Re: RS232-to-USB adapter with dial-up modem
--- On Sat, 9/18/10, Camaleón noela...@gmail.com wrote: Before you throw out your adapater :-), just be sure you cannot even communicate with minicom. I recalled that there was a way to send a command to the modem without minicom, so I tried: # echo ATDTtest-phone-number-here /dev/ttyUSB0 The modem does successfully dial the test number when connected through the USB adapter. The ATH command (hangup) also appears to be working: # echo ATH /dev/ttyUSB0 Strange, not sure why it doesn't dial out as a part of my pppd setup that works with RS-232: ## cat /etc/chatscripts/provider # This is the chat script used to dial out to your default service provider. # Please customize the entries enclosed in parenthesis to match your setup. # Only the provider file will be handled by poff and pon (unless with # extra command line arguments). # # Remember to edit /etc/ppp/peers/provider accordingly. # # ATZW2 as a default init string # - On all hayes compatible modems, W2 will correctly report the connect # speed. # ABORTBUSY ABORTNO CARRIER ABORTVOICE ABORTNO DIALTONE ATZW2 OKATDT12345678900 ogin idhere word passwordhere ppp ## cat /etc/ppp/peers/provider # These are the options to dial out to your default service provider. # Please customize them correctly. Only the provider file will be # handled by poff and pon (unless with extra command line arguments). # You usually need this if there is no PAP authentication noauth # The chat script (be sure to edit that file, too!) connect /usr/sbin/chat -v -f /etc/chatscripts/provider # Set up routing to go through this PPP link defaultroute # Default modem (you better replace this with /dev/ttySx!) /dev/ttyUSB0 # Speed 115200 # Keep modem up even if connection fails # persist -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/316004.59543...@web45812.mail.sp1.yahoo.com
What tool would convert map coordinates ?
Hi to Everyone, I need to convert map coordinates from Lambert II + to decimal degrees. I found a tool which works online on a web site, but the results lack precision : it gives degrees, minutes and integer seconds (no decimal after the seconds, while one second is about 30 meters of distance). More accurate tools are available for MSWIN, but I wish to use Linux resources. I have installed the gdal package, which I have successfully used for other purposes, but I don't know whether or not this would fit my present purpose. I don't have access to the GDAL doc, since it is provided on a strange format (dox), that I don't know how to use. Thanks in advance for your help -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c94f0a1.3080...@teaser.fr
Re: Printing Long Edge (Standard) with HP DeskJet 990C - CUPS+Gutenprint v5.0.2 does not work
I assume that you are using an Xwindows system and have a web browser installed. Try http://localhost:631/ to pull up the Cups aministration page. Set your printer defaults there and lp will follow. I find lp too arcane for my tastes being lazy. At the main page select: Add printer classesmanage printersClick on que name for your printerAdministrationSet default options. I would suggest setting draft mode and draft resolution as well as long edge. Your lp or lpr printing will use these defaults. This is much easier that messing around with the command line and stays set. Gary R On Fri, 17 Sep 2010 21:20:39 +0200, Merciadri Luca wrote: Amongst two printers, I've got an Hp Deskjet 990Cxi, and I use `CUPS+Gutenprint v5.0.2' as a driver for this printer. I would like to print both sides, e.g. using long edge mode (standard). The problem is that this seems not to be communicated to the printer, despite of the invokated command: == lpr -P Deskjet -o Resolution=300dpi -o PageSize=Letter -o Duplex=DuplexNoTumble == -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c94e1b2.7060...@verizon.net
Re: RS232-to-USB adapter with dial-up modem
On Sat, 18 Sep 2010 10:12:48 -0700, S D wrote: --- On Sat, 9/18/10, Camaleón wrote: Before you throw out your adapater :-), just be sure you cannot even communicate with minicom. I recalled that there was a way to send a command to the modem without minicom, so I tried: # echo ATDTtest-phone-number-here /dev/ttyUSB0 The modem does successfully dial the test number when connected through the USB adapter. The ATH command (hangup) also appears to be working: # echo ATH /dev/ttyUSB0 Well, that's good. But I would be more relaxed if you can also get it to work with minicom :-) Strange, not sure why it doesn't dial out as a part of my pppd setup that works with RS-232: Mmm, I cannot help you here (as I'm not using pppd) but maybe the initilization string for your modem (ATZW2) is not the correct one. Also, try to lower the modem speed to 56000 bps (instead those 115200 bps). Bellow is an excerpt of the log from your first e-mail: *** Sep 17 02:45:11 testbox chat[32626]: send (ATZW2^M) Sep 17 02:45:11 testbox chat[32626]: expect (OK) Sep 17 02:45:56 testbox chat[32626]: alarm Sep 17 02:45:56 testbox chat[32626]: Failed Sep 17 02:45:56 testbox pppd[32625]: Connect script failed Sep 17 02:46:36 testbox pppd[32625]: tcsetattr: Interrupted system call (line 1010) *** Is there any way you can use a flag in pppd configuration file to get a more verbose log? :-? Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.18.17.48...@gmail.com
Re: What tool would convert map coordinates ?
On 09/18/2010 01:02 PM, Bernard wrote: Hi to Everyone, I need to convert map coordinates from Lambert II + to decimal degrees. I found a tool which works online on a web site, but the results lack precision : it gives degrees, minutes and integer seconds (no decimal after the seconds, while one second is about 30 meters of distance). More accurate tools are available for MSWIN, but I wish to use Linux resources. I have installed the gdal package, which I have successfully used for other purposes, but I don't know whether or not this would fit my present purpose. I don't have access to the GDAL doc, since it is provided on a strange format (dox), that I don't know how to use. Thanks in advance for your help May I suggest you try apt-cache search coordinates libgeo-coordinates-utm-perl - Perl extension for Latitiude Longitude conversions libgeo-helmerttransform-perl - Transformations between coordinates in different datums -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c95009c.1060...@gmail.com
Re: Printing Long Edge (Standard) with HP DeskJet 990C - CUPS+Gutenprint v5.0.2 does not work
Gary Roach wrote: I assume that you are using an Xwindows system and have a web browser installed. Try http://localhost:631/ to pull up the Cups aministration page. Set your printer defaults there and lp will follow. I find lp too arcane for my tastes being lazy. At the main page select: Add printer classesmanage printersClick on que name for your printerAdministrationSet default options. I would suggest setting draft mode and draft resolution as well as long edge. Your lp or lpr printing will use these defaults. This is much easier that messing around with the command line and stays set. This is what I had already configured, at the beginning, and it changed nothing! I never use CLI for printing with CUPS, but the (localhost) web interface, as you suggest. The aforementioned command was simply Adobe Acrobat's interpretation of the options I had set when printing a PDF doc. On Fri, 17 Sep 2010 21:20:39 +0200, Merciadri Luca wrote: Amongst two printers, I've got an Hp Deskjet 990Cxi, and I use `CUPS+Gutenprint v5.0.2' as a driver for this printer. I would like to print both sides, e.g. using long edge mode (standard). The problem is that this seems not to be communicated to the printer, despite of the invokated command: == lpr -P Deskjet -o Resolution=300dpi -o PageSize=Letter -o Duplex=DuplexNoTumble == -- Merciadri Luca See http://www.student.montefiore.ulg.ac.be/~merciadri/ I use PGP. If there is an incompatibility problem with your mail client, please contact me. signature.asc Description: OpenPGP digital signature
Re: Blu-ray status in Linux
On 9/18/2010 7:39 AM, Camaleón wrote: On Fri, 17 Sep 2010 22:29:49 +0100, Angus Hedger wrote: On Fri, 17 Sep 2010 16:12:47 -0500 Mark Allums wrote: (...) I'm not interested in that, but I wondered if that meant that we would eventually be able to play Blu-Ray on Debian machines. Do you suppose we will see Blu-Ray support in VLC anytime soon? (...) It means that BR playback on linux is closer, for example windows has a protected content layer that passes the content from the player to the screen, with this key you could build something like that for windows. Mmmm, just out of curiosity (as I don't own a BD player neither have Blu- ray discs to play) but, do you mean there is currently no way to play Blu- ray in Linux? :-? Or just to put it in other words, what is the current status of the Blu- ray technology in Linux? It seems there is a project¹ that allows viewing such media type, but does it work nice, has any drawbacks...? ¹ http://themediaviking.com/software/bluray-linux/ Greetings, I don't know about mplayer or VLC, but MythTV 0.24 now has support for playback of BluRay discs, although I believe it's currently limited to AACS-protected discs, and not BD+. I hear that the libbdplus BD+ decryption library is maturing as well. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c95076a.9080...@familyross.net
[Resolved] badblocks: No such file or directory while trying to determine device size
On Fri, 17 Sep 2010 14:09:22 +, T o n g wrote: $ badblocks -p 99 -c 9 -wv /dev/$tdev badblocks: No such file or directory while trying to determine device size The keyword here is newly created partition. that was lenny, rebooted into squeeze and all are fine: The key here is reboot. No all tools realize the change in partition without a reboot, badblocks being one of them. -- Tong (remove underscore(s) to reply) http://xpt.sourceforge.net/techdocs/ http://xpt.sourceforge.net/tools/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/i7324j$uk...@dough.gmane.org
Re: Intel Corporation 82801BA/BAM AC'97 Audio Controller (rev 02)
On 9/17/2010 1:19 AM, Brian Ryans wrote: Quoting Doug on 2010-09-16 21:52:00, in Message-Id 4c92d7d0.4000...@optonline.net I have a medium-age Fry's computer that I bought new but on the cheap with Lindows, or something like that instead of Win. It was a real Linux without any aps, and you had to _buy_ any aps you wanted. It got SuSE 9.x in jig time, and then on up to 11.1, when I gave up SuSE because I could never get any sound out of it. The MOBO and the case both have the same model number, GQ3121. I once had one of those machines, a Fry's GQ3121. if I recall, it has an SiS700 series chipset; I'd have to contact the new owner and let me see if he'll let me run lspci on it, or still has the folder with lspci, etc printouts. I don't know what kind of sound processor it has. If you know of a Linux command that will tell me what the sound chip is, lspci | grep audio I ran the command on the machine and got this result: Multimedia audio controller: Silicon Integrated Circuits [SiS] AC'97 Sound Controller (rev a0) PS: I have not tried SuSE on any of the other machines, but I do have a live CD of 11.3. Perhaps I'll give that a try and see what happens. --doug --doug -- Blessed are the peacemakers...for they shall be shot at from both sides. --A.M. Greeley -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c95197c.1090...@optonline.net
Re: Does the HDCP crack have any implications for Debian?
On 9/18/2010 4:55 AM, Scott Ferguson wrote: I'm very happy with the performance I get by simply copying the bluerays I buy to hard drive, and I prefer keep my media on hdd. This bears some explanation. Are you watching stuff from Blu-Ray on a Debian machine? How? What is the process? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c951b6b.9080...@allums.com
Re: Blu-ray status in Linux
On 9/18/2010 1:39 PM, Kevin Ross wrote: On 9/18/2010 7:39 AM, Camaleón wrote: Or just to put it in other words, what is the current status of the Blu- ray technology in Linux? It seems there is a project¹ that allows viewing such media type, but does it work nice, has any drawbacks...? ¹ http://themediaviking.com/software/bluray-linux/ I don't know about mplayer or VLC, but MythTV 0.24 now has support for playback of BluRay discs, although I believe it's currently limited to AACS-protected discs, and not BD+. I hear that the libbdplus BD+ decryption library is maturing as well. AACS is broken, but few discs are protected using it. All recent discs ad BD+, AFAIK. Decrypting BD+ works when you have a key, but every time a BD+ key becomes known, they just switch to a new key. It's a losing game. I'm not interested in cracking protection, I just want to watch the movie, and do it under Debian, not Win/OS X/etc. (I have some old HD-DVD discs I would like to watch, as well. My optical drive can read those discs. The AACS crack works here, but the discs are not ISO standard, or at least they are not *nix-friendly. They can only be read under root, but VLC won't run as root. It's catch-22. Any advice?) -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c951dca.7050...@allums.com
Re: Mini system...What image to use?
On Sat, Sep 18, 2010 at 09:53:13PM +1000, Scott Ferguson wrote: On 18/09/10 21:31, Mark Neidorff wrote: Hi, I'm looking at buying a mini system with a VIA 1.5 GHz C7 processor (VIA CN700 northbridge VIA VT8237RP high bandwith vlink client southbridge). The debian site doesn't mention this processor. What image would I use to install debian on this system? image? your choice - I suspect you mean architecture... it's i386. Nice little board. If you decide to compile your own kernel, you can choose a more specific processor option: CONFIG_MVIAC7 -- Joel Roth -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100918201825.ga20...@sprite
Iomega 2TB USB drive
Hi All I am still trying to get this USB drive to show up as an icon on the desktop and to show up under the toolbar 'Places' like my 8GB USB memory stick and my /new-disk hdb (115GB internal drive). I am using Debian Lenny with Gnome as a desktop. Here is my 'mount' display /dev/sda1 on / type ntfs (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) fusectl on /sys/fs/fuse/connections type fusectl (rw) /dev/hdb on /new-disk type ext3 (rw,errors=remount-ro) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) /dev/sdb1 on /media/KINGSTON type vfat (rw,nosuid,nodev,uhelper=hal,shortname=lower,uid=1000) After I type 'mount /dev/sda1 /mnt here is my mount display /dev/sda1 on / type ntfs (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) fusectl on /sys/fs/fuse/connections type fusectl (rw) /dev/hdb on /new-disk type ext3 (rw,errors=remount-ro) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) /dev/sdb1 on /media/KINGSTON type vfat (rw,nosuid,nodev,uhelper=hal,shortname=lower,uid=1000) /dev/sda1 on /mnt type ntfs (rw) So if I read this right the device is mounted. Here is my 'fstab' # /etc/fstab: static file system information. # # file system mount point type options dump pass proc/proc procdefaults0 0 /dev/hda1 / ext3errors=remount-ro 0 1 /dev/hda5 noneswapsw 0 0 /dev/hdc/media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/hdd/media/cdrom1 udf,iso9660 user,noauto 0 0 /dev/fd0/media/floppy0 autorw,user,noauto 0 0 /dev/hdb/new-diskext3defaults,errors=remount-ro01 /dev/sda1/ntfsdefaults,errors=remount-ro01 And here is my 'mtab' /dev/sda1 / ntfs rw,errors=remount-ro 0 0 tmpfs /lib/init/rw tmpfs rw,nosuid,mode=0755 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 procbususb /proc/bus/usb usbfs rw 0 0 udev /dev tmpfs rw,mode=0755 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=620 0 0 fusectl /sys/fs/fuse/connections fusectl rw 0 0 /dev/hdb /new-disk ext3 rw,errors=remount-ro 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 /dev/sdb1 /media/KINGSTON vfat rw,nosuid,nodev,uhelper=hal,shortname=lower,uid=1000 0 0 /dev/sda1 /mnt ntfs rw 0 0 /dev/sda1 is present in both. I noticed that I don't have a 'label' for sda1. How do I 'label' it without reformatting the drive? I don't know if this has anything to do with displaying the icon but it doesn't hurt to ask those who are more proficient in things like this. Secondly when I tried to follow the advice give to me by previous respondents I 'lost' Kingston USB stick display. The only way I can get it to show up is to select an earlier boot option. How do I 'delete' the first boot option or at least move the last option to the top of the list. Thirdly -- is there somewhere or somehow of capturing the messages that flash across the screen when booting up -- I see something that tells me that USB port 1 cant be enumerated and several other messages that may have something to do with my problem. I do not believe it is a hardware problem because booting a live distro on this computer such as Ubuntu shows the USB drive and it is accessible. Last thing -- what would I use to change the permissions on the sda1? My /dev/sdb1 (Kingston) shows 'user' as owner and group as root -- is 'permissions' a possible cause of my problem? Also looking at /mnt shows 'root' can access files only, group is root without access and others have no access. chmod 700 /mnt says 'read only file system' ls -ld /mnt shows dr-x-- 1 root root 4096 2010-09-17 08:53 /mnt Sorry is this is overly long but I would really like to resolve this problem so I can use this drive as storage. Thanks John -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c95340d.7020...@sentex.net
Re: Iomega 2TB USB drive
On 9/18/2010 4:50 PM, John Lindsay wrote: Secondly when I tried to follow the advice give to me by previous respondents I 'lost' Kingston USB stick display. The only way I can get it to show up is to select an earlier boot option. How do I 'delete' the first boot option or at least move the last option to the top of the list. Edit your GRUB options. Which options depends on whether you are using GRUB legacy or GRUB2. is 'permissions' a possible cause of my problem? Conceivably. Also looking at /mnt shows 'root' can access files only, group is root without access and others have no access. chmod 700 /mnt says 'read only file system' ls -ld /mnt shows dr-x-- 1 root root 4096 2010-09-17 08:53 /mnt You *might* want chmod 777 while troubleshooting, and then possibly something like 755 depending on your needs later. 700 locks normal users out. The order goes user, group, world If root is the owner, then non-root can't read, write, or execute from that directory. In fact, just doing an ls inside a directory requires execute privileges on that directory. 700 for owner root is probably not what you want. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c95397f.2000...@allums.com
Re: Re: Can't locate ndiswrapper module!
Thanks for all the replies. Yes, I'm running Lenny with standard Debian kernel 2.6.26-2-486, and in doing so was hoping to avoid having to compile ndiswrapper. However, I have now done so. (It was not fast!) Chris Bannister's comment about PCcard v. Cardbus may be an issue - the card is Cardbus, the laptop recognises the card with lspci, but I don't yet know if the laptop is fully Cardbus compatible. If I read Geoff Simmons correctly, the pre-compiled modules do not exist any more. My reference was to 'stable' distribution package of ndiswrapper-source on Debian website which suggests that the modules do exist. Seems as though that page needs updating to remove the reference. I note that the corresponding page for Squeeze has no reference to pre-compiled modules. Thanks again. I still have some work to do to see if I can get this card working. Bruce -- === Bruce Ward, Nelson, New Zealand -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c954caa.3070...@orcon.net.nz
Re: What tool would convert map coordinates ?
Wayne Topa wrote: On 09/18/2010 01:02 PM, Bernard wrote: I need to convert map coordinates from Lambert II + to decimal degrees. May I suggest you try apt-cache search coordinates libgeo-coordinates-utm-perl - Perl extension for Latitiude Longitude conversions libgeo-helmerttransform-perl - Transformations between coordinates in different datums You might also try asking on the osgeo (open source geo) email list. -- In theory, there is no difference between theory and practice. Infnord practice, there is. Yogi Berra -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c9566d1.4000...@meetinghouse.net
