Re: Clé3G orange
Souvenirs, souvenirs... J'ai installer une clef 3G bouygues sous squeeze il y a quelques mois, et je n'ai plus l'ordinateur avec moi, mais si je me souviens bien, il n'y a rien à faire. Elle est reconnue par .. qqchose, tu paramêtres ton compte avec les info de orange et ça surf. Thierry -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201009220854.27132.tchate...@free.fr
Unrouteable address
Bonsoir, Depuis ma récente ré-installation de ma sid, j'ai de grosses difficultés à retrouver le parfait amour avec mutt pour recevoir mes emails L'envois des emails fonctionnent très bien. J'utilise mutt/fetchmail/exim4/procmail. Si j'envois un email sur ma messagerie voici le message du rapport : This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: m3t4li...@localhost Unrouteable address Je ne vois pas ce qu'il faut changer pour que les messages soient reçus par mutt. Des pistes svp?? -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/38811.81.66.168.50.1285188521.squir...@lavabit.com
Souci nvidia-kernel-legacy-71xx
Bonjour, Bonjour, j'ai un souci avec nvidia-kernel-legacy-71xx C'est le module nvidia qui correspond à la carte. Je l'ai installé via dkms (nvidia-kernel-legacy-71xx-dkms). Pas eu de souci apparent avec dkms. Voici l'extrait du log de Xorg qui me semble pertinent : (II) LoadModule: nvidia (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so dlopen: /usr/lib/xorg/modules/drivers/nvidia_drv.so: undefined symbol: \ AllocateScreenPrivateIndex (EE) Failed to load /usr/lib/xorg/modules/drivers/nvidia_drv.so (II) UnloadModule: nvidia (EE) Failed to load module nvidia (loader failed, 7) Quelqu'un a une idée ? Une dépenndance manquante ? Où pourrait se trouver ce AllocateScreenPrivateIndex ? Est-ce par exemple une fonction obsolète et en revenant à une version antérieure de la bibliothèque qui va bien, je pallierai au problème ? à tout hasard j'ai essayé les autres modules nvidia-legacy, 96xx et 173xx, ils se chargent sans problème mais ne correspondent pas à cette carte :( à part changer de carte je ne vois pas trop ce que je pourrais faire ;) -- A défaut du pardon, laisse venir l'oubli. -+- Alfred de Musset (1810-1857), Poésie -+- -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100923033343.53672...@jar-ptitsa.bidart.net
Re: Unrouteable address
Bonsoir, Depuis ma récente ré-installation de ma sid, j'ai de grosses difficultés à retrouver le parfait amour avec mutt pour recevoir mes emails L'envois des emails fonctionnent très bien. J'utilise mutt/fetchmail/exim4/procmail. Si j'envois un email sur ma messagerie voici le message du rapport : This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: m3t4li...@localhost Unrouteable address Je ne vois pas ce qu'il faut changer pour que les messages soient reçus par mutt. Des pistes svp?? bonjour, le pb est répertorié et provient de libc6 lien : http://bugs.debian.org/cgi-bin/pkgreport.cgi?pkg=libc6;dist=unstable en conséquence que donne : apt-cache policy libc6 merci de bien vouloir rendre compte slt bernard -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/1736879050.1405941285216654571.javamail.r...@zimbra28-e5.priv.proxad.net
Re: Souci nvidia-kernel-legacy-71xx
Le jeudi 23 septembre 2010 à 03:33:43, Yves Lambert a écrit : Bonjour, Bonjour, ’jour, ’jour, j'ai un souci avec nvidia-kernel-legacy-71xx […] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=596471 En résumé : paquet propriétaire plus maintenu par le propriétaire. Donc il te reste à gueuler auprès du propriétaire pour le convaincre que certains utilisent son vieux matériel avec le nouvel Xorg. (Bon, je ne sais pas quelle est ta carte mais il semble que les autres « legacy » vont chercher vieux quand même…) Tu as essayé nv ? -- Sylvain Sauvage -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201009230724.51343.sylvain.l.sauv...@free.fr
Ostatnie wolne miejsca - szkolenia z laptopem w cenie
Drodzy Pañstwo, Zgodnie z obowi±zuj±cym stanem prawnym* pragnê zapytaæ, czy wyra¿aj± Pañstwo zgodê na przes³anie informacji dotycz±cych szkoleñ organizowanych przez ASAP24. Prowadzone przez nas szkolenia to m.in.: Zarz±dzanie finansami dla niefinansistów z laptopem w cenie szkolenia. Je¿eli wyra¿aj± Pañstwo zgodê na przes³anie informacji, proszê odpisaæ TAK w temacie wiadomo¶ci. W ka¿dej chwili mog± Pañstwo tak± zgodê odwo³aæ. Jeli nie ¿yczycie sobie Pañstwo tego typu korespondencji proszê o przys³anie informacji z wyrazem USUÑ lub NIE w temacie wiadomo¶ci. W takim przypadku przepraszamy za k³opot i zajêcie czasu. Z powa¿aniem Anna Wilczyñska ASAP24 s. c. tel.: +22 654 09 35 mob.: +48 783 225 777 fax.: +22 100 13 24 e-mail: anna.wilczyn...@asap24.pl PS. Proszê o przekazanie tego maila osobom zainteresowanym tym tematem w Pañstwa firmie. Serdecznie dziêkujê. *zgodnie z Ustaw± o ¶wiadczeniu us³ug drog± elektroniczn± oraz dyrektyw± UOKiK: dopuszczalne jest przes³anie na adres e-mail pytania, czy adresat zgadza siê na otrzymywanie drog± elektroniczn± informacji handlowej - materia³y z konferencji nt. Bezpieczeñstwa w sieci Internet, Warszawa 14 marca 2006 -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/11163635186962835521...@jbor
Re: Problem z dyskiem ST32000542AS
Jak sie okazalo dysk w koncu wyzional ducha :) Czekam na nowy. -- Z poważaniem, Paweł Lalewicz _ GG:39211GSM: +48 510 808 000 ICQ:78825643Fax: 0048 41 3108000 Tlen: i-pawelek Skype: i-pawelek IRCnet: Pawelek_ #kielce -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c9a6c33.8070...@tlen.pl
Re: Problemas con Servidor de Pantallas despues de Actualización.
El mar, 21-09-2010 a las 22:54 -0500, Goku. escribió: 2010/9/19 Gonzalo Rivero fishfromsa...@gmail.com El dom, 19-09-2010 a las 10:39 -0700, Goku. escribió: Buenas tardes a todos: Tengo un problema con el servidor de pantallas, al iniciar la maquina, hace su proceso normal, pero al llegar a la pantalla azul de inicio, se regresa al modo texto, y asi lo hace varias veces hasta que aparece este aviso: El servidor de pantallas ha sido detenido unas 9 veces en los ultimos 90 segundos. Es probable que algo este fallando, se va a esperar durante 2 minutos antes de intentarlo otra vez en la pantalla :0. Este fallo vino despues de una actualización, pero unicamente recuerdo que se actualizaría el Google Chrome, y una actualizacion pequeña del kernel, porque pasaría de 2.6.26 a 2.6.27, habian ma cosas a actualizar pero solo eso recuerdo. vas a tener que revisar en los log (/var/log/Xorg.0.log), las líneas que te interesan empiezan con (WW) (de warning) y (EE) (de error) Hola Gonzalo gracias por contestar, revise en log como dijiste pero no supe identificar esas lineas..salian muchas. Utilice el cd de SystemRecovery y le di Xorg...eso me avisa de ciertos modulos inexistentes y habla de (ww) y de(EE). el resultado esta en este enlace: http://pastebin.ubuntu.com/498182/ . Gracias por tu ayuda. ¿usas algun driver propietario para los controladores graficos?, si es asi (NVIDA ATI ...) tendras que reinstalarlo (el controlador), pues normalmente compilan un modulo dependiente del nucleo y si has cambiado de nucleo no tienes el modulo adecuado -- Por favor, NO utilice formatos de archivo propietarios para el intercambio de documentos, como DOC y XLS, sino HTML, RTF, TXT, CSV o cualquier otro que no obligue a utilizar un programa de un fabricante concreto para tratar la información contenida en él. SALUD. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1285139059.2467.11.ca...@trujo.huvn.diraya.sspa.junta-andalucia.es
Instalar impresora Epson LX-300+
Hola amigos :), Debo instalar una impresora Epson LX-300+ en mi Debian GNU/Linux. Accedo a (Sistema + Administración + Imprimiendo), pero no aparece la controladora para esta impresora en específico. Desde ya, muchas gracias. Saludos, Adrián. -- Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas Infomed: http://www.sld.cu/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1285111272.2963.3.ca...@pcdebian
Re: Instalar impresora Epson LX-300+
On Tue, 21 Sep 2010, Adrián Alemán Cruz wrote: Debo instalar una impresora Epson LX-300+ en mi Debian GNU/Linux. Accedo a (Sistema + Administración + Imprimiendo), pero no aparece la controladora para esta impresora en específico. Desde ya, muchas gracias. Vamos a [1]openprinting, en la caja de búsqueda ponemos Epson LX-300, y nos da [2]un resultado, que es una [3]FAQ sobre epson, vamos al capitulo [4]Epson LX-300+ y miramos lo que dice. [1]http://www.openprinting.org/ [2]http://www.linuxfoundation.org/search/node/Epson%20LX-300 [3]http://www.linuxfoundation.org/collaborate/workgroups/openprinting/databaseepsonfaq [4]http://www.linuxfoundation.org/collaborate/workgroups/openprinting/databaseepsonfaq#Epson_LX-300.2B -- Saludos --- Angel
Re: Instalar impresora Epson LX-300+
Hola amigos :), Muchas gracias por responder amigo Angeld. El problema es que no tengo acceso a internet :(. Muchas gracias. Un abrazo. Saludos, Adrián. El mié, 22-09-2010 a las 14:54 +0200, angeld escribió: On Tue, 21 Sep 2010, Adrián Alemán Cruz wrote: Debo instalar una impresora Epson LX-300+ en mi Debian GNU/Linux. Accedo a (Sistema + Administración + Imprimiendo), pero no aparece la controladora para esta impresora en específico. Desde ya, muchas gracias. Vamos a [1]openprinting, en la caja de búsqueda ponemos Epson LX-300, y nos da [2]un resultado, que es una [3]FAQ sobre epson, vamos al capitulo [4]Epson LX-300+ y miramos lo que dice. [1]http://www.openprinting.org/ [2]http://www.linuxfoundation.org/search/node/Epson%20LX-300 [3]http://www.linuxfoundation.org/collaborate/workgroups/openprinting/databaseepsonfaq [4]http://www.linuxfoundation.org/collaborate/workgroups/openprinting/databaseepsonfaq#Epson_LX-300.2B -- Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas Infomed: http://www.sld.cu/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1285117768.2963.7.ca...@pcdebian
Chequeo de conexion adsl
Hola chicos, les comento que tengo instalado un debian como proxy con una conexion adsl de telefonica de argentina, luego de estar googleando bastante, no encuentro la manera de chequear el estado de la conexion, lo que quiero lograr, es que a traves de algun comando de consola, pueda chequear el estado de la conexion para que si: * la conexion se cae por parte de telefonica * el modem adsl este apagado * el modem adsl no sincronize con telefonica Ese comando me avise, ya sea a traves de codigo de error o algo, para que mediante script en bash (o alguna otra manera), hacer que el propio debian, reconecte o trate de restablecer la conexion, debido a que cada vez que pasa algo, el usuario final no sabe que hacer y el edificio donde esta instalado me queda a casi 40 minutos de viaje, entonces debo ir y reiniciar el modem, o llamar a telefonica, etc etc, queda clara la idea de lo que quiero lograr? es decir que en la manera de lo posible el propio debian pueda levantar la conexion. Gracias y besos a todos Nora -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/736776.47417...@web46315.mail.sp1.yahoo.com
Re: Chequeo de conexion adsl
El Wed, 22 Sep 2010 06:37:45 -0700, Nora Lineros escribió: Hola chicos, les comento que tengo instalado un debian como proxy con una conexion adsl de telefonica de argentina, luego de estar googleando bastante, no encuentro la manera de chequear el estado de la conexion, lo que quiero lograr, es que a traves de algun comando de consola, pueda chequear el estado de la conexion para que si: * la conexion se cae por parte de telefonica * el modem adsl este apagado * el modem adsl no sincronize con telefonica (...) Si el problema lo tienes con la línea telefónica (sincronización) Debian no te va a poder levantar la conexión, eso es un problema que tiene que solucionar tu ISP. Si el módem ADSL está apagado, tampoco lo va a poder encender Debian. Lo que puedes hacer (lo más realista) es monitorizar el estado de la conexión a Internet y en caso de error, pues llamar al centro donde tengas el equipo ADSL para que vean de qué se trata. Otra cosa que podría ser interesante sería que el módem tuviera la posibilidad de enviar alertas administrativas (mediante e-mail) o al menos que permita el envío de los registros al syslog de Debian. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.22.13.54...@gmail.com
Re: Instalar impresora Epson LX-300+
El Tue, 21 Sep 2010 21:09:28 -0400, Adrián Alemán Cruz escribió: El mié, 22-09-2010 a las 14:54 +0200, angeld escribió: On Tue, 21 Sep 2010, Adrián Alemán Cruz wrote: Debo instalar una impresora Epson LX-300+ en mi Debian GNU/Linux. Accedo a (Sistema + Administración + Imprimiendo), pero no aparece la controladora para esta impresora en específico. Desde ya, muchas gracias. Vamos a [1]openprinting, en la caja de búsqueda ponemos Epson LX-300, y nos da [2]un resultado, que es una [3]FAQ sobre epson, vamos al capitulo [4]Epson LX-300+ y miramos lo que dice. [1]http://www.openprinting.org/ [2]http://www.linuxfoundation.org/search/node/Epson%20LX-300 [3]http://www.linuxfoundation.org/collaborate/workgroups/ openprinting/databaseepsonfaq [4]http://www.linuxfoundation.org/collaborate/workgroups/ openprinting/databaseepsonfaq#Epson_LX-300.2B Muchas gracias por responder amigo Angeld. El problema es que no tengo acceso a internet :(. Muchas gracias. Un abrazo. Básicamente, lo que dicen los enlaces es que configures la impresora para usar el controlador ibmpro. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.22.13.57...@gmail.com
Re: Chequeo de conexion adsl
2010/9/22 Nora Lineros noraline...@yahoo.com.ar Hola chicos, les comento que tengo instalado un debian como proxy con una conexion adsl de telefonica de argentina, luego de estar googleando bastante, no encuentro la manera de chequear el estado de la conexion, lo que quiero lograr, es que a traves de algun comando de consola, pueda chequear el estado de la conexion para que si: * la conexion se cae por parte de telefonica * el modem adsl este apagado * el modem adsl no sincronize con telefonica Ese comando me avise, ya sea a traves de codigo de error o algo, para que mediante script en bash (o alguna otra manera), hacer que el propio debian, reconecte o trate de restablecer la conexion, debido a que cada vez que pasa algo, el usuario final no sabe que hacer y el edificio donde esta instalado me queda a casi 40 minutos de viaje, entonces debo ir y reiniciar el modem, o llamar a telefonica, etc etc, queda clara la idea de lo que quiero lograr? es decir que en la manera de lo posible el propio debian pueda levantar la conexion. Gracias y besos a todos Lo máximo que puedes hacer es reiniciar el router vía telnet/ssh/web cuando no haya conexión con el exterior. Algo así como: IP_DE_CONFIANZA=8.8.8.8 IP_GATEWAY=192.168.1.1 if [[ $(ping -c1 $IP_DE_CONFIANZA|grep 0 received) ]]; then # No hay conexión a internet if [[ $(ping -c1 $IP_GATEWAYA|grep 1 received) ]]; then # Problema con ADSL # reinciiar el router con telnet, ssh, o llamando a un script (en python p.e) que se conecte a la interfaz web. fi; fi; Dejo como deberes investigar como se reinicia tu router remotamente To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/736776.47417...@web46315.mail.sp1.yahoo.com -- Marc
Re: Chequeo de conexion adsl
Creo que con un ping recursivo bastaria Saludos, José 2010/9/22 Marc Aymerich glicer...@gmail.com 2010/9/22 Nora Lineros noraline...@yahoo.com.ar Hola chicos, les comento que tengo instalado un debian como proxy con una conexion adsl de telefonica de argentina, luego de estar googleando bastante, no encuentro la manera de chequear el estado de la conexion, lo que quiero lograr, es que a traves de algun comando de consola, pueda chequear el estado de la conexion para que si: * la conexion se cae por parte de telefonica * el modem adsl este apagado * el modem adsl no sincronize con telefonica Ese comando me avise, ya sea a traves de codigo de error o algo, para que mediante script en bash (o alguna otra manera), hacer que el propio debian, reconecte o trate de restablecer la conexion, debido a que cada vez que pasa algo, el usuario final no sabe que hacer y el edificio donde esta instalado me queda a casi 40 minutos de viaje, entonces debo ir y reiniciar el modem, o llamar a telefonica, etc etc, queda clara la idea de lo que quiero lograr? es decir que en la manera de lo posible el propio debian pueda levantar la conexion. Gracias y besos a todos Lo máximo que puedes hacer es reiniciar el router vía telnet/ssh/web cuando no haya conexión con el exterior. Algo así como: IP_DE_CONFIANZA=8.8.8.8 IP_GATEWAY=192.168.1.1 if [[ $(ping -c1 $IP_DE_CONFIANZA|grep 0 received) ]]; then # No hay conexión a internet if [[ $(ping -c1 $IP_GATEWAYA|grep 1 received) ]]; then # Problema con ADSL # reinciiar el router con telnet, ssh, o llamando a un script (en python p.e) que se conecte a la interfaz web. fi; fi; Dejo como deberes investigar como se reinicia tu router remotamente To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/736776.47417...@web46315.mail.sp1.yahoo.com -- Marc -- Jose Perez O.
Re: Instalar impresora Epson LX-300+
Hola :), Muchas Gracias amigos, en especial a Camaleón :). Saludos, Adrián. El mié, 22-09-2010 a las 13:57 +, Camaleón escribió: El Tue, 21 Sep 2010 21:09:28 -0400, Adrián Alemán Cruz escribió: El mié, 22-09-2010 a las 14:54 +0200, angeld escribió: On Tue, 21 Sep 2010, Adrián Alemán Cruz wrote: Debo instalar una impresora Epson LX-300+ en mi Debian GNU/Linux. Accedo a (Sistema + Administración + Imprimiendo), pero no aparece la controladora para esta impresora en específico. Desde ya, muchas gracias. Vamos a [1]openprinting, en la caja de búsqueda ponemos Epson LX-300, y nos da [2]un resultado, que es una [3]FAQ sobre epson, vamos al capitulo [4]Epson LX-300+ y miramos lo que dice. [1]http://www.openprinting.org/ [2]http://www.linuxfoundation.org/search/node/Epson%20LX-300 [3]http://www.linuxfoundation.org/collaborate/workgroups/ openprinting/databaseepsonfaq [4]http://www.linuxfoundation.org/collaborate/workgroups/ openprinting/databaseepsonfaq#Epson_LX-300.2B Muchas gracias por responder amigo Angeld. El problema es que no tengo acceso a internet :(. Muchas gracias. Un abrazo. Básicamente, lo que dicen los enlaces es que configures la impresora para usar el controlador ibmpro. Saludos, -- Camaleón -- Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas Infomed: http://www.sld.cu/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1285080696.3053.7.ca...@pcdebian
Re: Problemas con Servidor de Pantallas despues de A ctualización.
2010/9/22 Trujillo Carmona, Antonio antonio.trujillo.s...@juntadeandalucia.es El mar, 21-09-2010 a las 22:54 -0500, Goku. escribió: 2010/9/19 Gonzalo Rivero fishfromsa...@gmail.com El dom, 19-09-2010 a las 10:39 -0700, Goku. escribió: Buenas tardes a todos: Tengo un problema con el servidor de pantallas, al iniciar la maquina, hace su proceso normal, pero al llegar a la pantalla azul de inicio, se regresa al modo texto, y asi lo hace varias veces hasta que aparece este aviso: El servidor de pantallas ha sido detenido unas 9 veces en los ultimos 90 segundos. Es probable que algo este fallando, se va a esperar durante 2 minutos antes de intentarlo otra vez en la pantalla :0. Este fallo vino despues de una actualización, pero unicamente recuerdo que se actualizaría el Google Chrome, y una actualizacion pequeña del kernel, porque pasaría de 2.6.26 a 2.6.27, habian ma cosas a actualizar pero solo eso recuerdo. vas a tener que revisar en los log (/var/log/Xorg.0.log), las líneas que te interesan empiezan con (WW) (de warning) y (EE) (de error) Hola Gonzalo gracias por contestar, revise en log como dijiste pero no supe identificar esas lineas..salian muchas. Utilice el cd de SystemRecovery y le di Xorg...eso me avisa de ciertos modulos inexistentes y habla de (ww) y de(EE). el resultado esta en este enlace: http://pastebin.ubuntu.com/498182/ . Gracias por tu ayuda. ¿usas algun driver propietario para los controladores graficos?, si es asi (NVIDA ATI ...) tendras que reinstalarlo (el controlador), pues normalmente compilan un modulo dependiente del nucleo y si has cambiado de nucleo no tienes el modulo adecuado Buen dia...no ningun driver propietario. mi tarjeta grafica es la que viene integrada con la placa. y es una : *VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter. * Tambien dice ahi en el informe que, El nuevo controlador es SIS. no se si al actualizarse el sistema, tambien actualizo el driver de la tarjeta de video * * -- Por favor, NO utilice formatos de archivo propietarios para el intercambio de documentos, como DOC y XLS, sino HTML, RTF, TXT, CSV o cualquier otro que no obligue a utilizar un programa de un fabricante concreto para tratar la información contenida en él. SALUD. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1285139059.2467.11.ca...@trujo.huvn.diraya.sspa.junta-andalucia.es
Re: [OT] cifrar correos archivdos con enigma y pgp en thunderbird
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Total, que voy a probar con tu receta_111 [1] a crearme el contenedor donde esta la carpeta personal ( solo la personal) y crear los enlaces pertinentes. Como tendrán mi login, lo protegere con otra contraseña diferente y cada día me tocara montar la carpeta, logarme manualmente. Un pequeño pago, que gustosamente haré. Creo que con esto ya tengo para entretenerme y que cubre mis necesidades, GRACIAS. PD: *Camaleon: Menudo currazo eso de reenviarme todo para cifrarlo ( aunk seria perfectamente valido) [1]http://www.e-ghost.deusto.es/mediawiki/index.php/Receta_111 Salu2, comentare avances. Buenas. Ya tengo todo funcionando, gracias a todos por los comentarios. Una cosa mas relacionada con esto: Tengo la ruta por defecto del thunderbird con todas las carpetas de correo, menos la de mi correo personal que esta en ~/PERSONALES/cuentapersonal/buzon ( cifrada con encfs) Tengo unas reglas creadas en esta cuenta personal las cuales me dan un error al ejecutarse: Ha sucedido un error al truncar la bandeja de entrada tras filtrar un mensaje a la carpeta 'DEBIAN'. Puede que necesite cerrar Thunderbird y eliminar INBOX.msf. Pero todo sale corretamente, mueve el correo y se almacena, incluso cerrando la aplicacion y volviéndola a abrir. Todo esta como debe estar. El unico error que veo es en la consola de errores del thunderbird Error: DEBIAN is not defined Archivo de origen: javascript:%20DEBIAN Línea: 1 Antes de buscar una lista de thunderbird para realizar la pregunta y al ser culpa de la modificacion realizada. He preferido preguntar por aquí primero. ¿Alguna idea? Un saludo - -- This is Unix-Land. In quiet nights, you can hear the Windows machines reboot Si los tontos volaran, el cielo se oscurecería No me envie correos en formatos propietarios http://www.gnu.org/philosophy/no-word-attachments.es.html Please DO NOT send me emails in proprietary formats (doc, ppt) http://www.gnu.org/philosophy/no-word-attachments.es.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJMmiE8AAoJEOWNzQnqy+fzS8YIAJeTXb6xI0MW41abmV0FbFI/ Kk0DWCU7mpDmzv80NaZIa8AF1jHo5dqisR0BrU3xRG8MZlSDl7VgJ370N5Zv4WrJ /HoIsUskAL41S6YKAk/Rq0F/gShRSKAQ40R9OwCtMjKzHBBdRlBRI1YCbYiJybxu /xW1KXGzeDUh/xDilfzGQO5pi/7dBdLti7HBi9Ss752VLiyu/CqWTbPAY04nsSOX L5C8eNAvdv8tU4hrgmN5LyfXLO6CgTlD94s95oyQEx5UgaZzrh/sTxRL394K/4b3 K6owyHHYyh+GwfbuHoqHfEXUkpoQubchcDCz9fbTFcRvQfEJTTODr+Kw5aYg1t4= =v6zC -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/blu0-smtp180eb55481314480a4a0cb3b1...@phx.gbl
Re: [OT] cifrar correos archivdos con enigma y pgp en thunderbird
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Total, que voy a probar con tu receta_111 [1] a crearme el contenedor donde esta la carpeta personal ( solo la personal) y crear los enlaces pertinentes. Como tendrán mi login, lo protegere con otra contraseña diferente y cada día me tocara montar la carpeta, logarme manualmente. Un pequeño pago, que gustosamente haré. Creo que con esto ya tengo para entretenerme y que cubre mis necesidades, GRACIAS. PD: *Camaleon: Menudo currazo eso de reenviarme todo para cifrarlo ( aunk seria perfectamente valido) [1]http://www.e-ghost.deusto.es/mediawiki/index.php/Receta_111 Salu2, comentare avances. Buenas. Ya tengo todo funcionando, gracias a todos por los comentarios. Una cosa mas relacionada con esto: Tengo la ruta por defecto del thunderbird con todas las carpetas de correo, menos la de mi correo personal que esta en ~/PERSONALES/cuentapersonal/buzon ( cifrada con encfs) Tengo unas reglas creadas en esta cuenta personal las cuales me dan un error al ejecutarse: Ha sucedido un error al truncar la bandeja de entrada tras filtrar un mensaje a la carpeta 'DEBIAN'. Puede que necesite cerrar Thunderbird y eliminar INBOX.msf. Pero todo sale corretamente, mueve el correo y se almacena, incluso cerrando la aplicacion y volviéndola a abrir. Todo esta como debe estar. El unico error que veo es en la consola de errores del thunderbird Error: DEBIAN is not defined Archivo de origen: javascript:%20DEBIAN Línea: 1 Antes de buscar una lista de thunderbird para realizar la pregunta y al ser culpa de la modificacion realizada. He preferido preguntar por aquí primero. ¿Alguna idea? Un saludo Ains. He quitado la regla y la he creado de nuevo y parece que ya ha dejado de salir el mensaje de error. No se porque no lo probé primero :p Saludetes -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJMmiOpAAoJEOWNzQnqy+fz5XMH/i5Zfrl/+mxPW5lWgNhVWlSU o/IySBQooIyqmigpinF5tvTG+333G/XnGYt+A/yKRsL7PzTzRXyxVjKoimrN39dI DACRZpjavHIppB9MMAC2rcJ/raq2dH8D6GVWiaLc9IVO3zjHo8InBQccEhp8k4J3 fA9p/kGLi2EKwdXSU8695jOXaFmg5QLGiqjpEbmHBPw93dX/9vz152e6BoKwvqJ8 ZJ9SyX87YmanoeDoUIvIGEeON6E11iG9AXw0wOee24JNMe+5fWNIcyb3js4o9S99 XVekIIXoIzwE2uSzwS+c17sKdVIrTUU+/twpl5Ro9Yr3FvYga5c4eQZhIXcNiNk= =1uyj -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/blu0-smtp167992bd427c692bce0356bb1...@phx.gbl
Re: Chequeo de conexion adsl
On Wed, 22 Sep 2010 06:37:45 -0700 (PDT), Nora Lineros noraline...@yahoo.com.ar wrote: Hola chicos, les comento que tengo instalado un debian como proxy con una conexion adsl de telefonica de argentina, luego de estar googleando bastante, no encuentro la manera de chequear el estado de la conexion, lo que quiero lograr, es que a traves de algun comando de consola, pueda chequear el estado de la conexion para que si: * la conexion se cae por parte de telefonica * el modem adsl este apagado * el modem adsl no sincronize con telefonica Ese comando me avise, ya sea a traves de codigo de error o algo, para que mediante script en bash (o alguna otra manera), hacer que el propio debian, reconecte o trate de restablecer la conexion, debido a que cada vez que pasa algo, el usuario final no sabe que hacer y el edificio donde esta instalado me queda a casi 40 minutos de viaje, entonces debo ir y reiniciar el modem, o llamar a telefonica, etc etc, queda clara la idea de lo que quiero lograr? es decir que en la manera de lo posible el propio debian pueda levantar la conexion. Gracias y besos a todos Nora No se si te sirve, pero si estas usando pppoe yo me hice este script: seguramente se puede mejorar y agregar funciones, pero bueno asi me sirve, yo lo tengo croneado cada 1 minuto #!/bin/bash PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin SALIDA=$(ping 8.8.8.8 -W 20 -q -c10|grep packets transmitted|awk '{print $4}') if [ $SALIDA -ge 5 ]; then VPN=$(ping 10.0.1.1 -W 10 -q -c1|grep 1 packets transmitted|awk '{print $4}') if [ $VPN -eq 0 ]; then echo Se reinicia la vpn /etc/init.d/openvpn restart fi else echo Se reinicia la conexion poff sleep 10 pkill -9 pppd pon dsl-provider sleep 10 echo Se asigna la nueva ip al DNS /etc/init.d/noip2 restart echo Se reinicia la VPN /etc/init.d/openvpn restart fi Saludos -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/181783e308e4ad2563d1bddd586ae...@localhost
Re: Problemas con Servidor de Pantallas despues de A ctualización.
El 22 de septiembre de 2010 00:54, Goku. 5.46...@gmail.com escribió: 2010/9/19 Gonzalo Rivero fishfromsa...@gmail.com El dom, 19-09-2010 a las 10:39 -0700, Goku. escribió: Buenas tardes a todos: Tengo un problema con el servidor de pantallas, al iniciar la maquina, hace su proceso normal, pero al llegar a la pantalla azul de inicio, se regresa al modo texto, y asi lo hace varias veces hasta que aparece este aviso: El servidor de pantallas ha sido detenido unas 9 veces en los ultimos 90 segundos. Es probable que algo este fallando, se va a esperar durante 2 minutos antes de intentarlo otra vez en la pantalla :0. Este fallo vino despues de una actualización, pero unicamente recuerdo que se actualizaría el Google Chrome, y una actualizacion pequeña del kernel, porque pasaría de 2.6.26 a 2.6.27, habian ma cosas a actualizar pero solo eso recuerdo. vas a tener que revisar en los log (/var/log/Xorg.0.log), las líneas que te interesan empiezan con (WW) (de warning) y (EE) (de error) Hola Gonzalo gracias por contestar, revise en log como dijiste pero no supe identificar esas lineas..salian muchas. Utilice el cd de SystemRecovery y le di Xorg...eso me avisa de ciertos modulos inexistentes y habla de (ww) y de(EE). el resultado esta en este enlace: http://pastebin.ubuntu.com/498182/ . Me llama la atención esto: (EE) Failed to load module extmod (module doesnot exist,0) Failed to load module dbe (module doesnot exist,0) Failed to load module glx (module doesnot exist,0) Failed to load module record (module doesnot exist,0) Failed to load module dri (module doesnot exist,0) Failed to load module vga (module doesnot exist,0) es como si tendrías rota tu instalación de xorg (no tengo un debian a mano, así que no me acuerdo el nombre exacto del metapaquete, era algo de xserver-xorg o algo así).. además del chrome instalaste algo mas? (tipo un upgrade/dist-upgrade). ¿es posible que los módulos que no existen hayan estado en los sectores fallados del disco? (EE) Open /dev/fb0 No such file or directory y aparentemente está intentado levantar X con el framebuffer... ¿tendrás un /etc/xorg/xorg.conf? si tenés, decile que use sis (o si no funciona, vesa). Si no lo tenés vas a tener que crearlo a mano -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktinnvwtrq55hbgbcrv-vm2mvgywqpre0docod...@mail.gmail.com
Re: Ayuda con Lenny Resolucion
El Tue, 21 Sep 2010 21:39:34 + (UTC) Camaleón noela...@gmail.com escribió: El Tue, 21 Sep 2010 16:18:45 -0500, rantis cares escribió: Cuando escribi, me falto una hache, y me refiero a debian ETCH. O.k, no caí, sorry :-) El mensaje que me sale es OUT OF RANGE Ugh. Bueno, le puse el ratio de 60 hz y una resolucion de 800x600 # /etc/X11/xorg.conf Section Device Identifier Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller Driver i810 BusID PCI:0:2:0 EndSection Oye, no estoy segura pero me parece que tienes que cambiar el driver i810 (el antiguo) por el de intel (que es el moderno). Que te confirme alguien de por aquí, pero al menos en openSUSE el driver i810 está consideracomo legacy vamos, que ya no se usa :-? La otra respuesta es que nautilus es un gestor de ventanas, que comparado con icewm es muy pesado en tama;o, yo no necesito tanto. Lo que sucede con nautilus, en la configuracion grafica, me da la opcion de modificar la pantalla, y cuando cambio el tamano de pantalla, entonces se quita el mensaje de OUT OF RANGE, pero veo el archivo xorg.conf y ese sigue igual, sin ningun valor agregado, me imagino que xorg.conf debe estar leyendo los valores pero directamente de otro archivo. O quizá los cambios los ejecuta al vuelo, como hace xrandr :-? La verdad es que no se que significa xrandr, pero cuando cierro sesion y apago la maquina, vuelvo a ingresar y la configuracion que modifique, la sigue guardando. xrandr es una utilidad que te permite configurar en tiempo real las pantallas. Tienes buena documentación y ejemplos de uso en la wiki de Debian: http://wiki.debian.org/XStrikeForce/HowToRandR12 Quizá nautilus (supongo que te refieres al explorador de archivos de gnome) guarde la configuración bajo algún archivo en /etc/X11/ Xsession.d o lo tienes configurado para que te guarde la sesión :-? Saludos, De todas formas sería muy de agradecer el /var/log/Xorg.0.log. Normalmente las X toman la información del monitor a través de DDC o EDID, y a partir de esta configuran la resolución, profundidad de color, etc -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100922174053.2bfb3...@multimensaje.es
Protocolo de autenticacion
Protocolo de autenticacion Tengo un PC con Debian Lenny y necesito conectarme por modem a mi ISP que usa Windows 2003 Server. El tema es que hasta donde se linux por lo menos Debian usa protocolos de autenticacion PAP, CHAP y Windows 2003 Server usa MS-CHAP V2. Yno puedo conectarme a mi ISP ya que no usan el mismo protocolo de autenticacion, Que puedo hacer para que mi Debian use MS-CHAP V2 y pueda conectarse a mi ISP???. Saludos Cosme -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/d75451bf8f484f0baa406b79b48eb...@esid.gecgr.co.cu
Conectar a una red Ad-hoc
Hola gente, me compre un celu y quiero compartir la conexión 3G con la portatil. En el celu puedo armar una red Ad-hoc, en la portatil la veo, pero al tratar de conectar me tira error de que no puede obtener la IP, si pongo una IP estática me dice Imposible conectar con el punto de acceso. Las conexiones las manejo con el WiCD y el cliente DHCP que estoy usando es el dhcpcd. Tienen idea que puede estar fallando o si falta instalar algún paquete? -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009221328.40905.the.ab...@yahoo.com.ar
Duda con Mrtg y snmpd
hola gente tengo un problema estuve instalando en un server con linux y monte los servicios mrtg y snmpd pero cuando voy agregar las ip que quiero supervisar me da el siguiente error SNMP Error: no response received SNMPv1_Session (remote host: 192.168.100.5 [192.168.100.5].161) community: moxamax request ID: 277057394 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at /usr/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.1 on moxa...@192.168.100.5::v4only at /usr/bin/cfgmaker line 918 WARNING: Skipping moxa...@192.168.100.5: as no info could be retrieved es necesario que las maquinas a supervisar tengan instaladas el sevicio snmpd disculpen la pregunta.. jorgito -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1285172903.18291.15.ca...@aprendiz.localdomain
Re: [OT] acceso remoto para editar archivos
On Tue, 21 Sep 2010, Juan Manuel Acuña wrote: El 21/09/10 16:25, angeld escribió: On Tue, 21 Sep 2010, Juan Manuel Acuña wrote: Tengo un problemilla entre manos y quisiera ver si alguien puede iluminarme con alguna idea o experiencia. Les comento la situación: Por cuestiones de sobrecarga de trabajo, me piden que permita acceso por ssh o sftp a un servidor (debian lenny con apache2, php5 y mysql) a un desarrollador externo (un freelance) para que pueda leer, editar y hasta crear nuevos archivos en ciertas carpetas de un subdominio, que pueda solamente leer los archivos de otras y unas terceras directamente que no pueda ni leer, y si se puede, que ni siquiera vea la carpeta. Obviamente, los archivos de todas esas carpetas se deben poder seguir ejecutando para que este desarrollador pueda ver el resultado de sus cambios. Los demás dominios y subdominios que maneja el servidor deben seguir trabajando normalmente. La idea es que dicho desarrollador no descargue los archivos a su máquina, sino que los edite directamente en el servidor. El desarrollador ocupa eclipse con pdt y tiene un plugin que se llama Remote System Explorer para editar remotamente. Dado el caso podría pedirle al desarrollador que usara otra cosa que no fuera el eclipse. Alguna idea de por donde podré empezar? Por lo que leo el [1]Remote System Explorer sólo necesita acceso por ssh o ftp para trabajar, aunque no creo que edite los archivos en local, sino que los descargará y volverá a cargar automágicamente. Para editar en local sólo existe vi o similares :-) Respecto a lo de leer unas, no otras, ejecutar otras, ..., si con el sistema de permisos no das abasto, puedes usar [2]ACL, o si necesitas hilar muy muy fino, puedes [3]chrootar ssh, y montar los directorios necesarios por medio de la opción [4]bind para que sólo vea lo que tu quieras y no más. [1]http://tmober.blogspot.com/2006/11/remote-system-explorer-10-is-released.html [2]http://wiki.debian.org/HelpOnAccessControlLists [3]http://www.debian.org/doc/manuals/securing-debian-howto/ap-chroot-ssh-env.en.html [4]http://linux.die.net/man/8/mount Angel, primero que nada, muchas gracias por responder. Efectivamente tienes razón, el remote system explorer baja el archivo y lo sube de nuevo automágicamente. Yo no lo sabía. El sistema de permisos no me da abasto, y de hecho, si necesito hilar fino. Creo que te haré caso y voy a chrootar :) Nunca lo he hecho, pero, siempre es bueno meterse a algo nuevo. Me acabo de acordar de como tenía montado algo para la misma o parecida tarea. Si el usuario sólo necesita editar, y no necesita nada del sistema, puedes montar un ftp que haga automágicamente chroot (proftpd, vsftpd), y para que el tráfico no vaya en claro, que utilice [1]ssl. Tuve algo parecido montado, en el que el fichero passwd del ftp era independiente del del sistema (vía pam), para así tener totalmente separados unas cosas de otras, y que no permitía conexiones que no fueran cifradas. Clientes ftp con ssl hay [2]unos cuantos, y espero que eclipse pueda también realizarlo. Crear y mantener un chroot para conexiones ssh es matador, pero si puedes implementar algo como lo descrito, te ahorras muchos trabajo y problemas. [1]http://wiki.vpslink.com/Configuring_vsftpd_for_secure_connections_%28TLS/SSL/SFTP%29 [1]http://www.proftpd.org/docs/howto/TLS.html [2]http://filezilla-project.org/ [2]http://gftp.seul.org/ -- Saludos --- Angel
Re: Conectar a una red Ad-hoc
On Wed, 22 Sep 2010, Abejo wrote: Hola gente, me compre un celu y quiero compartir la conexión 3G con la portatil. En el celu puedo armar una red Ad-hoc, en la portatil la veo, pero al tratar de conectar me tira error de que no puede obtener la IP, si pongo una IP estática me dice Imposible conectar con el punto de acceso. Las conexiones las manejo con el WiCD y el cliente DHCP que estoy usando es el dhcpcd. Tienen idea que puede estar fallando o si falta instalar algún paquete? Dudo mucho que el celular disponga de un servidor DHCP, por lo que sospecho tendrás que poner la ip a mano. ¿Cuando colocas una ip estática, es del mismo rango en el portátil y el celular?. Puedes probar a montar la red a mano: iwconfig wlanX Ad-Hoc iwconfig wlanX essid CELULAR iwconfig wlanX key s:PASS para confirmar que la conexión la realizas correctamente, y luego probar con diferentes ipes, o con el demonio dhcpd, pero ya seguro que la conexión está realizada. -- Saludos --- Angel
Re: Duda con Mrtg y snmpd
El mié, 22-09-2010 a las 12:28 -0400, jorge cruz fraga escribió: es necesario que las maquinas a supervisar tengan instaladas el sevicio snmpd disculpen la pregunta.. Si, tiene que haber un demonio snmpd que conteste a las peticiones. Por si te sirve de ayuda, hay un artículo bastante viejo, pero que quizá te oriente en http://libertonia.escomposlinux.org/story/2003/1/17/224253/241 Un saludo JulHer signature.asc Description: Esta parte del mensaje está firmada digitalmente
Re: Protocolo de autenticacion
El día 22 de septiembre de 2010 13:49, cosme co...@gecgr.co.cu escribió: Protocolo de autenticacion Tengo un PC con Debian Lenny y necesito conectarme por modem a mi ISP que usa Windows 2003 Server. El tema es que hasta donde se linux por lo menos Debian usa protocolos de autenticacion PAP, CHAP y Windows 2003 Server usa MS-CHAP V2. Yno puedo conectarme a mi ISP ya que no usan el mismo protocolo de autenticacion, Que puedo hacer para que mi Debian use MS-CHAP V2 y pueda conectarse a mi ISP???. fijate en man pppd como hacerlo, porque hay una opción require-mschap-v2. Mas no puedo decirte porque hace años no me conecto por teléfono y esa opción la encontré buscando pppd+ms-chap v2 en google. Y si el resultado fue la página de manual, seguramente ya la tenés en tu sistema -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktimtenfrhvywjxgk+m6ot3bgqo3aeo9w9eks3...@mail.gmail.com
Re: Problemas con Servidor de Pantallas despues de A ctualización.
2010/9/22 Gonzalo Rivero fishfromsa...@gmail.com El 22 de septiembre de 2010 00:54, Goku. 5.46...@gmail.com escribió: 2010/9/19 Gonzalo Rivero fishfromsa...@gmail.com El dom, 19-09-2010 a las 10:39 -0700, Goku. escribió: Buenas tardes a todos: Tengo un problema con el servidor de pantallas, al iniciar la maquina, hace su proceso normal, pero al llegar a la pantalla azul de inicio, se regresa al modo texto, y asi lo hace varias veces hasta que aparece este aviso: El servidor de pantallas ha sido detenido unas 9 veces en los ultimos 90 segundos. Es probable que algo este fallando, se va a esperar durante 2 minutos antes de intentarlo otra vez en la pantalla :0. Este fallo vino despues de una actualización, pero unicamente recuerdo que se actualizaría el Google Chrome, y una actualizacion pequeña del kernel, porque pasaría de 2.6.26 a 2.6.27, habian ma cosas a actualizar pero solo eso recuerdo. vas a tener que revisar en los log (/var/log/Xorg.0.log), las líneas que te interesan empiezan con (WW) (de warning) y (EE) (de error) Hola Gonzalo gracias por contestar, revise en log como dijiste pero no supe identificar esas lineas..salian muchas. Utilice el cd de SystemRecovery y le di Xorg...eso me avisa de ciertos modulos inexistentes y habla de (ww) y de(EE). el resultado esta en este enlace: http://pastebin.ubuntu.com/498182/ . Me llama la atención esto: (EE) Failed to load module extmod (module doesnot exist,0) Failed to load module dbe (module doesnot exist,0) Failed to load module glx (module doesnot exist,0) Failed to load module record (module doesnot exist,0) Failed to load module dri (module doesnot exist,0) Failed to load module vga (module doesnot exist,0) es como si tendrías rota tu instalación de xorg (no tengo un debian a mano, así que no me acuerdo el nombre exacto del metapaquete, era algo de xserver-xorg o algo así).. además del chrome instalaste algo mas? (tipo un upgrade/dist-upgrade). Hola, Gonzalo, aparte del chrome, se hizo una pequeña actualizacion del kernel, pero creo que nunca se llego a completar por que en el GRUB no cambio la version, ni tengo otro kernel disponible, ¿es posible que los módulos que no existen hayan estado en los sectores fallados del disco? Respecto a esto, te comento que este disco, tiene sectores dañados, hace dias, intente instalar Ubuntu 9 y me arrojo varios sectores dañados y lo mismo ocurrio al salir de una sesion live de Debian, me decia que el HD estaba dañado. Probablemente, sea mejor ya deshacerme de este HD, (EE) Open /dev/fb0 No such file or directory y aparentemente está intentado levantar X con el framebuffer... ¿tendrás un /etc/xorg/xorg.conf? si tenés, decile que use sis (o si no funciona, vesa). Si no lo tenés vas a tener que crearlo a mano Como se hace esto??. Gracias por contestar. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktinnvwtrq55hbgbcrv-vm2mvgywqpre0docod...@mail.gmail.com
Consulta montar particion remota
Hola gente! Queria hacerles una consulta porque estuve googleando y no di con la respuesta. Quiero montar una particion Ext3 remotamente. Tengo mi servidor con samba y una serie de usuarios definidos.. entre ellos el usuario:usuario y quiero en las maquinas clientes montar una carpeta que esta dentro de archivo raiz del servidor, bajo el dominio del usuario user y del grupo sambashare Esto lo hice porque desde samba puedo entrar sin ningun problema, pero si quiero guardar un archivo desde OpenOffice se cuelga la aplicacion porque no sabe que hacer con la direccion del archivo. entonces edito el fstab y agrego //192.168.0.250/123 /media/Servidor cifs username=usuario,password=,workgroup=OFICINA,file_mode=0777,dire_mode=0777,user,owner,exec,rw,auto 0 0 asi logro montar la particion, pero pierdo todos los privilegios sobre los directorios.. La particion queda bajo el usuario 1002 que es el UID del usuario usuario dentro del servidor y el grupo propietario es users. Donde puedo estar pifiando??? Saludos! Javier Lujan Bahia Blanca http://ar.linkedin.com/in/javierjlujan -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktim+_-err3gpoa6tvr=_c71mk0pe8sviqk3sw...@mail.gmail.com
Re: Protocolo de autenticacion
El mié, 22-09-2010 a las 11:49 -0500, cosme escribió: Que puedo hacer para que mi Debian use MS-CHAP V2 y pueda conectarse a mi ISP???. Con la opción require-mschap-v2 en /etc/ppp/provider o como se llame el archivo donde configuras los datos de tu proveedor (teléfono al que se llama...) Un saludo JulHer signature.asc Description: Esta parte del mensaje está firmada digitalmente
Re: Conectar a una red Ad-hoc
El Miércoles 22 Septiembre 2010 13:46:06 angeld escribió: On Wed, 22 Sep 2010, Abejo wrote: Hola gente, me compre un celu y quiero compartir la conexión 3G con la portatil. En el celu puedo armar una red Ad-hoc, en la portatil la veo, pero al tratar de conectar me tira error de que no puede obtener la IP, si pongo una IP estática me dice Imposible conectar con el punto de acceso. Las conexiones las manejo con el WiCD y el cliente DHCP que estoy usando es el dhcpcd. Tienen idea que puede estar fallando o si falta instalar algún paquete? Dudo mucho que el celular disponga de un servidor DHCP, por lo que sospecho tendrás que poner la ip a mano. ¿Cuando colocas una ip estática, es del mismo rango en el portátil y el celular?. Puedes probar a montar la red a mano: iwconfig wlanX Ad-Hoc iwconfig wlanX essid CELULAR iwconfig wlanX key s:PASS para confirmar que la conexión la realizas correctamente, y luego probar con diferentes ipes, o con el demonio dhcpd, pero ya seguro que la conexión está realizada. En este momento no tengo la PC a mano, a la noche pruebo conectar a la red en forma manual (eso no lo probé), en un rato ando por un cliente asi que también voy a probar si desde un vista puedo conectarme al celu, en teoría en programa tiene un servidor DHCP (por lo menos en las opciones esta) el programa que instale para generar la red es este http://www.appbrain.com/app/net.szym.barnacle el celu usa android 2.1 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009221411.07245.the.ab...@yahoo.com.ar
Re: Problemas con Servidor de Pantallas despues de A ctualización.
El día 22 de septiembre de 2010 13:53, Goku. 5.46...@gmail.com escribió: 2010/9/22 Gonzalo Rivero fishfromsa...@gmail.com El 22 de septiembre de 2010 00:54, Goku. 5.46...@gmail.com escribió: 2010/9/19 Gonzalo Rivero fishfromsa...@gmail.com El dom, 19-09-2010 a las 10:39 -0700, Goku. escribió: Buenas tardes a todos: Tengo un problema con el servidor de pantallas, al iniciar la maquina, hace su proceso normal, pero al llegar a la pantalla azul de inicio, se regresa al modo texto, y asi lo hace varias veces hasta que aparece este aviso: El servidor de pantallas ha sido detenido unas 9 veces en los ultimos 90 segundos. Es probable que algo este fallando, se va a esperar durante 2 minutos antes de intentarlo otra vez en la pantalla :0. Este fallo vino despues de una actualización, pero unicamente recuerdo que se actualizaría el Google Chrome, y una actualizacion pequeña del kernel, porque pasaría de 2.6.26 a 2.6.27, habian ma cosas a actualizar pero solo eso recuerdo. vas a tener que revisar en los log (/var/log/Xorg.0.log), las líneas que te interesan empiezan con (WW) (de warning) y (EE) (de error) Hola Gonzalo gracias por contestar, revise en log como dijiste pero no supe identificar esas lineas..salian muchas. Utilice el cd de SystemRecovery y le di Xorg...eso me avisa de ciertos modulos inexistentes y habla de (ww) y de(EE). el resultado esta en este enlace: http://pastebin.ubuntu.com/498182/ . Me llama la atención esto: (EE) Failed to load module extmod (module doesnot exist,0) Failed to load module dbe (module doesnot exist,0) Failed to load module glx (module doesnot exist,0) Failed to load module record (module doesnot exist,0) Failed to load module dri (module doesnot exist,0) Failed to load module vga (module doesnot exist,0) es como si tendrías rota tu instalación de xorg (no tengo un debian a mano, así que no me acuerdo el nombre exacto del metapaquete, era algo de xserver-xorg o algo así).. además del chrome instalaste algo mas? (tipo un upgrade/dist-upgrade). Hola, Gonzalo, aparte del chrome, se hizo una pequeña actualizacion del kernel, pero creo que nunca se llego a completar por que en el GRUB no cambio la version, ni tengo otro kernel disponible, ¿es posible que los módulos que no existen hayan estado en los sectores fallados del disco? Respecto a esto, te comento que este disco, tiene sectores dañados, hace dias, intente instalar Ubuntu 9 y me arrojo varios sectores dañados y lo mismo ocurrio al salir de una sesion live de Debian, me decia que el HD estaba dañado. Probablemente, sea mejor ya deshacerme de este HD, (EE) Open /dev/fb0 No such file or directory y aparentemente está intentado levantar X con el framebuffer... ¿tendrás un /etc/xorg/xorg.conf? si tenés, decile que use sis (o si no funciona, vesa). Si no lo tenés vas a tener que crearlo a mano Como se hace esto??. man xorg.conf :P A mi me lo hizo debian, aunque yo vengo usando testing (y el mismo xorg.conf) desde hace dos estables atrás mas o menos, y en esa época SI era necesario, ahora X.org intenta configurar al vuelo. Me parece que había algún comando para generar el archivo de configuración (en mi época era dpkg-reconfigure xserver-xfree86/xorg y contestar las preguntas) pero te toca investigarlo -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlkti�lycfggnxudyqscrejgyjhqdbsindd7wf...@mail.gmail.com
Re: Consulta montar particion remota
El 22/09/10, Javier Lujan javier.ce...@gmail.com escribió: Hola gente! Queria hacerles una consulta porque estuve googleando y no di con la respuesta. Quiero montar una particion Ext3 remotamente. Tengo mi servidor con samba y una serie de usuarios definidos.. entre ellos el usuario:usuario y quiero en las maquinas clientes montar una carpeta que esta dentro de archivo raiz del servidor, bajo el dominio del usuario user y del grupo sambashare Esto lo hice porque desde samba puedo entrar sin ningun problema, pero si quiero guardar un archivo desde OpenOffice se cuelga la aplicacion porque no sabe que hacer con la direccion del archivo. entonces edito el fstab y agrego //192.168.0.250/123 /media/Servidor cifs username=usuario,password=,workgroup=OFICINA,file_mode=0777,dire_mode=0777,user,owner,exec,rw,auto 0 0 asi logro montar la particion, pero pierdo todos los privilegios sobre los directorios.. La particion queda bajo el usuario 1002 que es el UID del usuario usuario dentro del servidor y el grupo propietario es users. Donde puedo estar pifiando??? Saludos! Javier Lujan Bahia Blanca http://ar.linkedin.com/in/javierjlujan -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktim+_-err3gpoa6tvr=_c71mk0pe8sviqk3sw...@mail.gmail.com Quiero montar una particion Ext3 remotamente. quiero en las maquinas clientes montar una carpeta que esta dentro de archivo raiz del servidor, bajo el dominio del usuario user y del grupo sambashare Preguntontas: ¿El servidor donde está el disco es GNU/Linux? ¿Los clientes son GNU/Linux? Si ambos son verdaderos, ¿para qué usás samba? Corriendo OpenSSH server en el servidor, los clientes acceden por ssh sin inconvenientes a donde quieras. De hecjho, la red de mi casa está montada así, compartiendo carpetas e impresoras. Sambca/CIFS es EXCLUSIVAMENTE para acceder / dar acceso (ma' non troppo) a una red de Windows. JAP -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikuzgz3bnxkz_x-adtbclze9u0eËot+xyo...@mail.gmail.com
Re: Consulta montar particion remota
On Wed, 22 Sep 2010, Javier Lujan wrote: Queria hacerles una consulta porque estuve googleando y no di con la respuesta. Quiero montar una particion Ext3 remotamente. Tengo mi servidor con samba y una serie de usuarios definidos.. entre ellos el usuario:usuario y quiero en las maquinas clientes montar una carpeta que esta dentro de archivo raiz del servidor, bajo el dominio del usuario user y del grupo sambashare Esto lo hice porque desde samba puedo entrar sin ningun problema, pero si quiero guardar un archivo desde OpenOffice se cuelga la aplicacion porque no sabe que hacer con la direccion del archivo. entonces edito el fstab y agrego //192.168.0.250/123 /media/Servidor cifs username=usuario,password=,workgroup=OFICINA,file_mode=0777,dire_mode=0777,user,owner,exec,rw,auto 0 0 asi logro montar la particion, pero pierdo todos los privilegios sobre los directorios.. La particion queda bajo el usuario 1002 que es el UID del usuario usuario dentro del servidor y el grupo propietario es users. Donde puedo estar pifiando??? Te has leído un montón de cosas del man 'mount.cifs', pero te has olvidado un par. :-) * uid= * gid= juraría que había alguna otra forma de hacerlo, pero en estos momentos no estoy muy lúcido. Si me acuerdo, más. -- Saludos --- Angel
Re: Consulta montar particion remota
On Wed, 22 Sep 2010, Javier Argentina wrote: El 22/09/10, Javier Lujan javier.ce...@gmail.com escribió: Hola gente! Queria hacerles una consulta porque estuve googleando y no di con la respuesta. Quiero montar una particion Ext3 remotamente. Tengo mi servidor con samba y una serie de usuarios definidos.. entre ellos el usuario:usuario y quiero en las maquinas clientes montar una carpeta que esta dentro de archivo raiz del servidor, bajo el dominio del usuario user y del grupo sambashare Esto lo hice porque desde samba puedo entrar sin ningun problema, pero si quiero guardar un archivo desde OpenOffice se cuelga la aplicacion porque no sabe que hacer con la direccion del archivo. entonces edito el fstab y agrego //192.168.0.250/123 /media/Servidor cifs username=usuario,password=,workgroup=OFICINA,file_mode=0777,dire_mode=0777,user,owner,exec,rw,auto 0 0 asi logro montar la particion, pero pierdo todos los privilegios sobre los directorios.. La particion queda bajo el usuario 1002 que es el UID del usuario usuario dentro del servidor y el grupo propietario es users. Donde puedo estar pifiando??? Saludos! Javier Lujan Bahia Blanca http://ar.linkedin.com/in/javierjlujan Quiero montar una particion Ext3 remotamente. quiero en las maquinas clientes montar una carpeta que esta dentro de archivo raiz del servidor, bajo el dominio del usuario user y del grupo sambashare Preguntontas: ¿El servidor donde está el disco es GNU/Linux? ¿Los clientes son GNU/Linux? Si ambos son verdaderos, ¿para qué usás samba? ¿Por que no?. No es la primera, ni será la última vez que use directorios compartidos por samba en mis máquinas, ya sea para poder acceder a lo mismo desde Linux y Win, ya sea para no montar nfs en una máquina, para no abrir más políticas en un firewal, ..., o simplemente, porque puedo, porque quiero o me apetece. Corriendo OpenSSH server en el servidor, los clientes acceden por ssh sin inconvenientes a donde quieras. De hecjho, la red de mi casa está montada así, compartiendo carpetas e impresoras. No entender. Usar ssh, con herramientas tipo 'sshfs' sobre 'fuse' puede ser tu solución, pero no creo que sea LA SOLUCIÓN. Sambca/CIFS es EXCLUSIVAMENTE para acceder / dar acceso (ma' non troppo) a una red de Windows. Creo que andas un poco perdido. Cada situación requiere una solución, y no existen recetas universales. Como era el dicho, manolete, si no sabes torear, pa'que te metes. -- Saludos --- Angel
RE: Consulta montar particion remota
On Wed, 22 Sep 2010, Javier Argentina wrote: El 22/09/10, Javier Lujan javier.ce...@gmail.com escribió: Hola gente! Queria hacerles una consulta porque estuve googleando y no di con la respuesta. Quiero montar una particion Ext3 remotamente. Tengo mi servidor con samba y una serie de usuarios definidos.. entre ellos el usuario:usuario y quiero en las maquinas clientes montar una carpeta que esta dentro de archivo raiz del servidor, bajo el dominio del usuario user y del grupo sambashare Esto lo hice porque desde samba puedo entrar sin ningun problema, pero si quiero guardar un archivo desde OpenOffice se cuelga la aplicacion porque no sabe que hacer con la direccion del archivo. Buenas... Por aportar mi granito y entretenerme un rato Lo mismo una solucion rapida puede ser usar sshfs como han comentado por aqui. por lo que yo entiendo tu usuario es generico usuario por lo que tendra un password mas o menos sabida. Si todos los que se conectan son linux, puedes ponerla en el fstab apuntando al fichero con la clave en /root ( o no) y listo. Todo se guardara con el usuario usuario XD Es una idea, lo tuyo deberia funcionar. No se donde falla Un saludo y suerte
Re: CLAMAV
El mar, 21-09-2010 a las 14:49 -0400, Felix Perez escribió: El día 21 de septiembre de 2010 12:04, J. Alejandro Martinez Linare alejan...@fcmec.sld.cu escribió: y ahora si funciono, pero luego me da el error que les puse , el primero es decir este r...@ubuntu:/home/juan# clamd clamd: error while loading shared libraries: libclamav.so.6: cannot open shared object file: No such file or directory r...@ubuntu:/home/juan# Veo que usas ubuntu, ¿no será un problema especifico de ubuntu? ¿consutaste en una lista de ubuntu? gracias a todos de antemano , si alguien pudiece facilitar el poder bajar las actualizaciones del mismo se lo agradeceria, es que solo tengo infomed, pero no hay un lugar de aca de cuba del que pueda bajar esas actualizaciones,el main y el daily, gracias a todos. No sé si se podrá bajar así como así una actualización, pero me huele a que no estas usando debian, ya que lenny, squeeze y sid en sus repos tienen clamav, y si estas en lenny debes apuntar a los repos de volatile para mantenerlos actualizados, para ello si no cuentas con acceso internet nada más que para el correo, lo veo difícil a no ser que montes un repo local. Y como monta un repo loca sin internet?? como lo actualiza, si el fresclam baja updates cada hora? me parece que la utilizacion de clamav ( o cualquier antivirus) sin acceso internet no es muy util Suerte. -- usuario linux #274354 normas de la lista: http://wiki.debian.org/NormasLista como hacer preguntas inteligentes: http://www.sindominio.net/ayuda/preguntas-inteligentes.html -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1285191248.2484.1.ca...@gabita2.angel-alvarez.com.ar
Re: Instalar impresora Epson LX-300+
El mar, 21-09-2010 a las 19:21 -0400, Adrián Alemán Cruz escribió: Hola amigos :), Debo instalar una impresora Epson LX-300+ en mi Debian GNU/Linux. Accedo a (Sistema + Administración + Imprimiendo), pero no aparece la controladora para esta impresora en específico. Desde ya, muchas gracias. de nada Saludos, Adrián. -- Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas Infomed: http://www.sld.cu/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1285191330.2484.2.ca...@gabita2.angel-alvarez.com.ar
error update-rc.d
Buenas noches a t...@s, Espero que me podáis ayudar a resolver este pequeño problema que tengo con el comando update-rc.d. Tengo la versión squeeze instalada. En primer lugar explicar un poco la situación. Quiero utilizar update-rc.d para cambiar el orden de ejecucion de un script, concretamente el relacionado con el mldonkey-server, actualmente su configuración es la siguiente: S16mldonkey-server en rc2.d, rc3.d, rc4.d y rc5.d K01mldonkey-server en rc0.d, rc1.d y rc6.d Al ejecutar los comandos: # update-rc.d -f mldonkey-server remove (elimina los distintos enlaces al script mldonkey-server) esto lo hace bien. El siguiente comando es el que no funciona # update-rc.d mldonkey-server defaults 20 también he probado su equivalente # update-rc.d mldonkey-server start 20 2 3 4 5 . stop 20 0 1 6 . Una vez ejecutado cualquiera de estos comandos genera los distintos enlaces en los distintos rcX.d pero con el mismo número de orden S16 y K01, no lo cambia a S20 y K20. La pregunta es, ¿estoy haciendo algo mal, me estoy equivocando con los parámetros del comando o se me ha pasado algo por alto?. He mirado el man de updadte-rc.d y buscando por internet pero no he encontrado nada al respecto y estoy un poco perdido. Agradecería cualquier tipo de ayuda. Gracias. Un saludo Fran. -- ~º~ ~ºO0oº~~ ~~o0ºO0º~~ ~~~ ~oºO0ºo~~~ ~o0ºo~ ~~oO0o~ Fran ~~~~~ ~~~ ~ \ ~ _~ /~~~ Linux user #483867 ~ ~~ ~ ~ \_/ \_/~ http://www.debian.org ~~~ ~~ ~ |_º_| ~ http://www.gnupg.org ~~~~~ ~ /~|X| \ ~ http://www.ubuntu.com ~~ ~ ~ ~~ / |X| \~~ ~ http://www.pfsense.org ~~ |\ ~ ~ / ~ |X| ~ \~ http://freenas.org~~ ___|_\_ ~~ /~ //|\\ ~\ ~ -^--^--^--^--^--^--^--^--\º-º-º/--^--^--@--^--^-- signature.asc Description: Esto es una parte de mensaje firmado digitalmente
Re: error update-rc.d
On Wed, 22 Sep 2010, Francisco Manuel Acibo Carballeira wrote: Buenas noches a t...@s, Espero que me podáis ayudar a resolver este pequeño problema que tengo con el comando update-rc.d. Tengo la versión squeeze instalada. En primer lugar explicar un poco la situación. Quiero utilizar update-rc.d para cambiar el orden de ejecucion de un script, concretamente el relacionado con el mldonkey-server, actualmente su configuración es la siguiente: S16mldonkey-server en rc2.d, rc3.d, rc4.d y rc5.d K01mldonkey-server en rc0.d, rc1.d y rc6.d Al ejecutar los comandos: Sólo he podido probar con un Squeeze con dependency based boot sequencing, pero aquí mis resultados # update-rc.d -f mldonkey-server remove (elimina los distintos enlaces al script mldonkey-server) esto lo hace bien. # update-rc.d-insserv -f ssh remove Esto también lo hace bien El siguiente comando es el que no funciona # update-rc.d mldonkey-server defaults 20 # update-rc.d-insserv ssh defaults 66 update-rc.d: warning: ssh stop runlevel arguments (0 1 6) do not match LSB Default-Stop values (none) Adding system startup for /etc/init.d/ssh ... /etc/rc0.d/K66ssh - ../init.d/ssh /etc/rc1.d/K66ssh - ../init.d/ssh /etc/rc6.d/K66ssh - ../init.d/ssh /etc/rc2.d/S66ssh - ../init.d/ssh /etc/rc3.d/S66ssh - ../init.d/ssh /etc/rc4.d/S66ssh - ../init.d/ssh /etc/rc5.d/S66ssh - ../init.d/ssh parece que este funciona también he probado su equivalente # update-rc.d mldonkey-server start 20 2 3 4 5 . stop 20 0 1 6 . # update-rc.d-insserv ssh start 66 2 3 4 5 . stop 66 0 1 6 . update-rc.d: warning: ssh stop runlevel arguments (0 1 6) do not match LSB Default-Stop values (none) Adding system startup for /etc/init.d/ssh ... /etc/rc0.d/K66ssh - ../init.d/ssh /etc/rc1.d/K66ssh - ../init.d/ssh /etc/rc6.d/K66ssh - ../init.d/ssh /etc/rc2.d/S66ssh - ../init.d/ssh /etc/rc3.d/S66ssh - ../init.d/ssh /etc/rc4.d/S66ssh - ../init.d/ssh /etc/rc5.d/S66ssh - ../init.d/ssh Este también parece que va bien. Una vez ejecutado cualquiera de estos comandos genera los distintos enlaces en los distintos rcX.d pero con el mismo número de orden S16 y K01, no lo cambia a S20 y K20. La pregunta es, ¿estoy haciendo algo mal, me estoy equivocando con los parámetros del comando o se me ha pasado algo por alto?. He mirado el man de updadte-rc.d y buscando por internet pero no he encontrado nada al respecto y estoy un poco perdido. Agradecería cualquier tipo de ayuda. Gracias. Creo que estas haciendo todo bien. A ver si pillo una Lenny en la que pueda hacer pruebas para ver si el resultado es el mismo, pero tanto la página man como mis pruebas confirman que es correcto Solo se me ocurre que 'update-rc.d' sea tan listo como para mirar que 'mldonkey' necesita la red, y no te deje poner números inferiores al arranque de la red, que en mi caso es 19. En mi caso no es el caso, y en el tuyo tampoco porque intentas poner números mayores: # update-rc.d-insserv ssh defaults 1 update-rc.d: warning: ssh stop runlevel arguments (0 1 6) do not match LSB Default-Stop values (none) Adding system startup for /etc/init.d/ssh ... /etc/rc0.d/K01ssh - ../init.d/ssh /etc/rc1.d/K01ssh - ../init.d/ssh /etc/rc6.d/K01ssh - ../init.d/ssh /etc/rc2.d/S01ssh - ../init.d/ssh /etc/rc3.d/S01ssh - ../init.d/ssh /etc/rc4.d/S01ssh - ../init.d/ssh /etc/rc5.d/S01ssh - ../init.d/ssh En último caso, generas los enlaces a mano. :-( -- Saludos --- Angel
Re: CLAMAV
El día 22 de septiembre de 2010 17:34, Angel Claudio Alvarez an...@angel-alvarez.com.ar escribió: El mar, 21-09-2010 a las 14:49 -0400, Felix Perez escribió: El día 21 de septiembre de 2010 12:04, J. Alejandro Martinez Linare alejan...@fcmec.sld.cu escribió: y ahora si funciono, pero luego me da el error que les puse , el primero es decir este r...@ubuntu:/home/juan# clamd clamd: error while loading shared libraries: libclamav.so.6: cannot open shared object file: No such file or directory r...@ubuntu:/home/juan# Veo que usas ubuntu, ¿no será un problema especifico de ubuntu? ¿consutaste en una lista de ubuntu? gracias a todos de antemano , si alguien pudiece facilitar el poder bajar las actualizaciones del mismo se lo agradeceria, es que solo tengo infomed, pero no hay un lugar de aca de cuba del que pueda bajar esas actualizaciones,el main y el daily, gracias a todos. No sé si se podrá bajar así como así una actualización, pero me huele a que no estas usando debian, ya que lenny, squeeze y sid en sus repos tienen clamav, y si estas en lenny debes apuntar a los repos de volatile para mantenerlos actualizados, para ello si no cuentas con acceso internet nada más que para el correo, lo veo difícil a no ser que montes un repo local. Y como monta un repo loca sin internet?? como lo actualiza, si el fresclam baja updates cada hora? Él que consulta supongo que depende de una organización y supongo que si le plantea al jefe el problema en cuestión este podrá ver la posibilidad de crear en algún equipo con acceso a internet un repo local y así mantener los equipos actualizados. De no ser el caso y utilizar solo linux como estación de trabajo sin acceso a internet no veo la utilidad de un antivirus. me parece que la utilizacion de clamav ( o cualquier antivirus) sin acceso internet no es muy util Si necesita clamav o algún otro antivirus pues debe explicar a sus jefes o superiores que necesita acceso a internet por lo menos esa aplicación. Si le dicen que no, pues a usar solo linux y adiós windows. Saludos. Suerte. -- usuario linux #274354 normas de la lista: http://wiki.debian.org/NormasLista como hacer preguntas inteligentes: http://www.sindominio.net/ayuda/preguntas-inteligentes.html -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1285191248.2484.1.ca...@gabita2.angel-alvarez.com.ar -- usuario linux #274354 normas de la lista: http://wiki.debian.org/NormasLista como hacer preguntas inteligentes: http://www.sindominio.net/ayuda/preguntas-inteligentes.html -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktik+yu6mxj5tnptntrdmutgwxrk1u6y8udarb...@mail.gmail.com
Re: Consulta montar particion remota
El día 22 de septiembre de 2010 12:56, Javier Lujan javier.ce...@gmail.com escribió: Hola gente! Queria hacerles una consulta porque estuve googleando y no di con la respuesta. Quiero montar una particion Ext3 remotamente. Tengo mi servidor con samba y una serie de usuarios definidos.. entre ellos el usuario:usuario y quiero en las maquinas clientes montar una carpeta que esta dentro de archivo raiz del servidor, bajo el dominio del usuario user y del grupo sambashare Esto lo hice porque desde samba puedo entrar sin ningun problema, pero si quiero guardar un archivo desde OpenOffice se cuelga la aplicacion porque no sabe que hacer con la direccion del archivo. entonces edito el fstab y agrego //192.168.0.250/123 /media/Servidor cifs username=usuario,password=,workgroup=OFICINA,file_mode=0777,dire_mode=0777,user,owner,exec,rw,auto 0 0 asi logro montar la particion, pero pierdo todos los privilegios sobre los directorios.. La particion queda bajo el usuario 1002 que es el UID del usuario usuario dentro del servidor y el grupo propietario es users. Donde puedo estar pifiando??? Y nfs no te vale? supongo los clientes son windows, porque yo desde testing a una carpeta ext3 y otra ntfs utilizando el menu Lugares conectar con el servidor... Y seleccionado la opción adecuada (ftp, ssh, webdav, samba, etc) y luego usando nautilus nunca he tenido problemas para acceder a archivos del servidor en forma remota. Solo que algunos archivos (no recuerdo en fs) los abre como solo lectura. El server que sistema tiene? Los clientes que sistemas tienen? Saludos. -- usuario linux #274354 normas de la lista: http://wiki.debian.org/NormasLista como hacer preguntas inteligentes: http://www.sindominio.net/ayuda/preguntas-inteligentes.html -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlkti7eucvw49o92m=gupp0lsepcb8npq9u2n...@mail.gmail.com
Sincronizar agenda entre Debian y Android
Hola a todos, Acabo de adquirir un móvil que lleva Android. Quisiera saber cómo poder sincronizar los datos de la Agenda, Notas, Tareas y contactos con el teléfono. Uso Kontact, pero si fuese necesario no me importaría usar otras aplicaciones mientras la sincronizaciones sean posibles. He buscado información por internet, pero parece ser que tódo se reduce a usar los servicios de Google (y para asuntos personales no me gusta mucho la idea). Me gustaría más una solución más parecida a lo que llevo haciendo muchos años con mi agenda electrónica Palm: usar Kpilot para sincronizar PC y agenda directamente, sin más complicaciones. ¿Alguna sugerencia? ¿Qué aplicacion existe para manejar tareas en Android? Salu2 de jEsuSdA 8) -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009230732.55916.lis...@jesusda.com
Re: Apt-get kan ikke finde packages
Tak, til Peter og Jonas. Det betyder vel også at det ikke hjælper at forsøge at compilere fra kildekoden. flem #uname -m armv5tejl # dpkg --print-architecture arm flem On 22-09-2010 07:48, Peter Makholm wrote: Flemming Bjerke flemm...@bjerke.dk writes: Jeg var slet ikke klar over at der er noget der hedder arm-arkitektur. Det er der. Jeg har smækket linux ind på en dns-323 nasserver fordi den forlængst var hacket, og ganske mange tilsynelandende bruger den. Nåh, men jeg må bare se om pakkerne dur i alle tilfælde. http://wiki.dns323.info/ Her står der tydeligt at der er en ARM cpu i. ARM er meget udbredt på embedded-hardware, PDA'er og telefoner. Men hvor findes oplysningen om at apt-get skal bruge arm-packages eller i386-packages? Hvad sker der hvis jeg lige midlertidigt snyder og skriver i386? Kan man det? Du kan se hvilken arkitektur Debian er installeret med med kommandoen 'dpkg --print-architecture', med 'uname -m' kan man se hvilken arkitektur kernen tror det er. I begge tilfælde vil du sikkert få noget med 'arm' på din dns323. //Makholm -- To UNSUBSCRIBE, email to debian-user-danish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c9a388e.8000...@bjerke.dk
Re: Apt-get kan ikke finde packages
2010/9/22 Flemming Bjerke flemm...@bjerke.dk: Tak, til Peter og Jonas. Det betyder vel også at det ikke hjælper at forsøge at compilere fra kildekoden. Det burde da kunne virke, men jeg synes du skulle starte med at hente en .deb og installere med dpkg -i. Den .deb du kan hente herfra, burde virke på arm: http://downloads.slimdevices.com/SqueezeboxServer_v7.5.1/ Hvis ikke den dur, kan du prøve en herfra: http://downloads.slimdevices.com/nightly/index.php?ver=7.5 Mvh Frederik -- To UNSUBSCRIBE, email to debian-user-danish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikcq7qgk-zjneqvxbtcyup+8gpywuoucdp33...@mail.gmail.com
Bug da Locaweb está presente em alguma versão do D ebian?
Salve todos, Estive de férias nas últimas semanas e agora é que estou me interando do assunto e uma das notícias que li hoje no site da INFO [1] menciona o bug RHSA-2010:0704-1 e também há um comentário de um leitor que sugeriu o link [2] onde tem uma ferramenta para [supostamente] confirmar se este bug está presente em outras distros e que também menciona o bug com outro código, desta vez o CVE-2010-3081. Alguém já rodou este utilitário em um Debian para verificar se (e em quais) versões o bug está presente? O link [3] possui a descrição completa do bug e a correção para os RH-Like. No link [4], tam a mesma descrição (só que forma mais genérica, com link para o download da ferramenta de testes e ainda uma gambiarra para remendar o problema sem precisar implementar o patch. Ainda tenho uns servidores antigos (Sarge) que não posso atualizar. Será que esta gambiarra resolveria mesmo o problema? ps: Para quem ainda não se interou sobre o assunto neste link [5] tam uma bela explicação sobre ele e o procedimneto para explorá-lo. [1] http://info.abril.com.br/noticias/seguranca/locaweb-rebate-afirmacoes-da-red-hat-21092010-54.shl [2] https://www.ksplice.com/uptrack/cve-2010-3081.ssi.xhtml [3] http://rhn.redhat.com/errata/RHSA-2010-0704.html [4] http://isc.sans.edu/diary.html?storyid=9574 [5] http://sota.gen.nz/compat1/ -- Welington Rodrigues Braga -- Web: http://www.welrbraga.eti.br MSN: welrbraga[*]msn·com Gtalk: welrbraga[*]gmail·com Yahoo / Skype: welrbraga PGP Key: 0x6C7654EB Linux User #253605 Em tudo somos atribulados, porém não angustiados; perplexos, porém não desanimados; perseguidos, porém não desamparados; abatidos, porém não destruídos; - 2Co 4:8,9 -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlkti=_6ffzzc-fsptgvwqrp43wf6ufhswr8y4dt...@mail.gmail.com
Re: Bug da Locaweb está p resente em alguma versão do Debian?
On Wed, 22 Sep 2010, Welington R. Braga wrote: Estive de férias nas últimas semanas e agora é que estou me interando do assunto e uma das notícias que li hoje no site da INFO [1] menciona o bug RHSA-2010:0704-1 e também há um comentário de um leitor que sugeriu o link [2] onde tem uma ferramenta para [supostamente] confirmar se este bug está presente em outras distros e que também menciona o bug com outro código, desta vez o CVE-2010-3081. Atualize seu Debian, e nunca rode nada publicado pela ksplice. Uma empresa tem que ser muito irresponsável para sugerir que usuário rode uma exploit com payload e obfuscada. Outros publicaram exploits exemplo para o 2010-3081 sem o payload, e sem obfuscação. Já a ksplice publicou uma exploit de verdade, e fez o maior alarde para vender seus serviços. Alguém já rodou este utilitário em um Debian para verificar se (e em quais) versões o bug está presente? http://security-tracker.debian.org/tracker/CVE-2010-3081 Ainda tenho uns servidores antigos (Sarge) que não posso atualizar. Você está com problemas, então. E não é por causa do 2010-3081 (que só atinge kernel amd64, de qualquer forma). É por ele, e todos os outros bugs, de kernel e aplicação, que existem e nunca serão consertados no Sarge. Se vai precisar de servidores que não podem ser mexidos por mais de três anos, use RedHat Enterprise, e nunca instale nenhum pacote fora da distro. Será que esta gambiarra resolveria mesmo o problema? Em tese. Mas não vai resolver de forma alguma os OUTROS problemas. -- One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie. -- The Silicon Valley Tarot Henrique Holschuh -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100922122513.ga5...@khazad-dum.debian.net
Re: Computador nao desliga
Rodolfo, estou usando o kernel [rona...@ppgcbix ~]$ uname -a Linux PPGCBix 2.6.32-5-686 #1 SMP Sat Sep 18 02:14:45 UTC 2010 i686 GNU/Linux Oficial da unstable, não foi compilado por mim. Valeu Inte Em 21-09-2010 23:59, Rodolfo escreveu: Qual kernel que você está utilizando ? esse kernel foi compilado por você mesmo ? Em 20 de setembro de 2010 18:50, Ronaldo Reis Junior chrys...@gmail.com mailto:chrys...@gmail.com escreveu: Pessoal, estou com um Compaq 510, aparentemente tudo funciona perfeito, mas ao mandar desligar ele faz tudo e para na frase Power off, mas não desliga automaticamente, tenho que desligar no botão. Ja tentei as seguintes soluções: colocar na inicialização: apci=force no=apm apci=force acpi=off apm=power_off e neste caso coloquei no /etc/modules: apm power_off=1 Mas nada disto funcionou, o sistema continua não desligando automaticamente. Alguem tem alguma dica? Valeu Inte Ronaldo -- 10ª lei - Seu orientador espera que a sua produtividade seja baixa inicialmente e esteja acima da média após um ano. --Herman, I. P. 2007. Following the law. NATURE, Vol 445, p. 228. Prof. Ronaldo Reis Júnior | .''`. UNIMONTES/DBG/Lab. Ecologia Comportamental e Computacional | : :' : Campus Universitário Prof. Darcy Ribeiro, Vila Mauricéia | `. `'` CP: 126, CEP: 39401-089, Montes Claros - MG - Brasil | `- Fone: (38) 3229-8192 | ronaldo.r...@unimontes.br mailto:ronaldo.r...@unimontes.br | http://www.ppgcb.unimontes.br/lecc | LinuxUser#: 205366 -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org mailto:debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org mailto:listmas...@lists.debian.org Archive: http://lists.debian.org/4c97e52e.6070...@gmail.com -- 1ª lei - Suas férias começam após a defesa e entrega de sua dissertação. --Herman, I. P. 2007. Following the law. NATURE, Vol 445, p. 228. Prof. Ronaldo Reis Júnior | .''`. UNIMONTES/DBG/Lab. Ecologia Comportamental e Computacional | : :' : Campus Universitário Prof. Darcy Ribeiro, Vila Mauricéia | `. `'` CP: 126, CEP: 39401-089, Montes Claros - MG - Brasil | `- Fone: (38) 3229-8192 | ronaldo.r...@unimontes.br | http://www.ppgcb.unimontes.br/lecc | LinuxUser#: 205366 -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c9a7706.4090...@gmail.com
Re: Computador nao desliga
2010/9/22 Ronaldo Reis Junior chrys...@gmail.com Rodolfo, estou usando o kernel [rona...@ppgcbix ~]$ uname -a Linux PPGCBix 2.6.32-5-686 #1 SMP Sat Sep 18 02:14:45 UTC 2010 i686 GNU/Linux Oficial da unstable, não foi compilado por mim. Ele está mostrando alguma mensagem de erro? Tu tá usando Gnome ou KDE ou ... ? Tá usando GDM ou KDM ou ? Valeu Inte Em 21-09-2010 23:59, Rodolfo escreveu: Qual kernel que você está utilizando ? esse kernel foi compilado por você mesmo ? Em 20 de setembro de 2010 18:50, Ronaldo Reis Junior chrys...@gmail.commailto: chrys...@gmail.com escreveu: Pessoal, estou com um Compaq 510, aparentemente tudo funciona perfeito, mas ao mandar desligar ele faz tudo e para na frase Power off, mas não desliga automaticamente, tenho que desligar no botão. Ja tentei as seguintes soluções: colocar na inicialização: apci=force no=apm apci=force acpi=off apm=power_off e neste caso coloquei no /etc/modules: apm power_off=1 Mas nada disto funcionou, o sistema continua não desligando automaticamente. Alguem tem alguma dica? Valeu Inte Ronaldo -- 10ª lei - Seu orientador espera que a sua produtividade seja baixa inicialmente e esteja acima da média após um ano. --Herman, I. P. 2007. Following the law. NATURE, Vol 445, p. 228. Prof. Ronaldo Reis Júnior | .''`. UNIMONTES/DBG/Lab. Ecologia Comportamental e Computacional | : :' : Campus Universitário Prof. Darcy Ribeiro, Vila Mauricéia | `. `'` CP: 126, CEP: 39401-089, Montes Claros - MG - Brasil | `- Fone: (38) 3229-8192 | ronaldo.r...@unimontes.br mailto:ronaldo.r...@unimontes.br | http://www.ppgcb.unimontes.br/lecc | LinuxUser#: 205366 -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org mailto:debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org mailto:listmas...@lists.debian.org Archive: http://lists.debian.org/4c97e52e.6070...@gmail.com -- 1ª lei - Suas férias começam após a defesa e entrega de sua dissertação. --Herman, I. P. 2007. Following the law. NATURE, Vol 445, p. 228. Prof. Ronaldo Reis Júnior | .''`. UNIMONTES/DBG/Lab. Ecologia Comportamental e Computacional | : :' : Campus Universitário Prof. Darcy Ribeiro, Vila Mauricéia | `. `'` CP: 126, CEP: 39401-089, Montes Claros - MG - Brasil | `- Fone: (38) 3229-8192 | ronaldo.r...@unimontes.br | http://www.ppgcb.unimontes.br/lecc | LinuxUser#: 205366 -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c9a7706.4090...@gmail.com -- Robson Roberto Souza Peixoto Robinho robsonpeix...@gmail.com Computer Science Master's degree student, University of Campinas Linux Counter #395633 IRC: robsonpeixoto Twitter: http://twitter.com/rrspba
Re: Ajuda com migração de Firewall
Caros, consegui resolver o problema era configuração dos alias das placas de rede, estava configurando slackwaremente e nao conforme o debian exige, além de ter tido que alterar a tahg allow-hotplug para auto nas minhas interfaces de rede. Att. Leandro Moreira. Em 10 de setembro de 2010 09:00, Leandro Moreira lean...@leandromoreira.eti.br escreveu: Caros, Consegui finalmente convencer meu chefe a migrar o firewall de nossa empresa do slackware para o debian, instalei o SO, migrei os scritps instalaei os serviços que funcionavam no hosts (proxy e dns) e na hora de colcocar a maquina em produção, aconteceu uma coisa muito estranha, segue abaixo a minha topologia: REDE MAN | | GW VPN | | INTERNET --- FW BORDA --- FW Interno --- REDE REDE O firewal que eu tentei substitui foi o firewall de borda, para a REDE SEDE tudo funcinou normalment, internet e sistemas, para quem vinha da REDE MAN ou da INERNET os serviços estavam inacesiveis, por exemplo, não conseguia acessar o servidor web nem por ip e nem por nome, o mais estranho é que no sysclt.conf o o ipv4 esta ativado: net.ipv4.ip_forward=1 sysctl -a | grep net.ipv4.conf.eth0.forwarding net.ipv4.conf.eth0.forwarding = 1 sysctl -a | grep net.ipv4.conf.eth1.forwarding net.ipv4.conf.eth1.forwarding = 1 sysctl -a | grep net.ipv4.conf.eth2.forwarding net.ipv4.conf.eth2.forwarding = 1 sysctl -a | grep net.ipv4.conf.eth3.forwarding net.ipv4.conf.eth3.forwarding = 1 Ao que tudo indica o forward esta ativado entre as interfaces. Realizei um teste coloquei a segmente uma rede e coloquei apenas o meu desktop atraz desse seguimento e fiz uma constatação interessante, consigo acessar normalmente o firewall de borda, mas o firewall interno nao consigo acessar me retorna time out. Abaixo segue a configuração do meu serividor HP ML 150 G6 XEON E5504 @ 2.00GHz 4 GB RAM 2 interfaces de Rede dualpotr HP NC382T (chipset broadcom) Será que há mais alguma coisa a habilitar além do net.ipv4.ip_forward no sysctl. Att. -- Leandro Moreira Network Administrator LPIC1 - Linux Professional Institute Certified e-mail/msn: lean...@leandromoreira.eti.br Tel.: + 55(32) 9906-5713 -- Leandro Moreira Network Administrator LPIC1 - Linux Professional Institute Certified e-mail/msn: lean...@leandromoreira.eti.br Tel.: + 55(32) 9906-5713
Re: gdm3 exclude certain usernames
On Tue, 21 Sep 2010 11:36:46 -0400, Rob Owens wrote: On Wed, Sep 22, 2010 at 01:18:21AM +1000, Scott Ferguson wrote: Disclaimer - I know nothing of gnome, but no one else has answered... I suspect you want the front-end (greeter) not the daemon but - see disclaimer :-) schema is possibly similar to 2.2, see:- http://live.gnome.org/GDM/2.22/Configuration Thanks! That website gave me the syntax I needed. All I had to do was make /etc/gdm3/daemon.conf look like this: [greeter] Exclude=myuser All that talk of schemas had me confused. I think I must speak a different language than the Gnome developers... That remebembers me... there used to be a GUI app to handle that (in gdm 2.x) that one could launch with gksu /usr/sbin/gdmsetup but the same app under gdm3 lacks for many of its features (in fact, it's pretty minimal). Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.22.07.04...@gmail.com
Re: directly install RH packages using rpm instead of alien
On Wed, 22 Sep 2010 04:16:55 +, T o n g wrote: We all know that, ,- | On Debian and derived systems it is recommended to use alien to | convert RPM packages into .deb format instead of bypassing the Debian | package management system by installing them directly with rpm. `- However, I'm wondering if it OK to install RH packages directly using rpm instead of going through alien convention. (...) Smart package manager¹ was developed having that in mind, but I think there is no direct (and clean) way to install rpm on deb systems (and viceversa), so, why not follow the alien path being the recommended one? :-? ¹ Does Smart's wide support for packaging systems mean I can install .rpm packages on my Debian system? Or .deb packages on my RPM-based system? http://labix.org/smart/faq#head-15e431ff69330db0ad3f078e2139c58ba7b00a4b Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.22.07.27...@gmail.com
Re: gdm3 exclude certain usernames
On 22/09/10 17:04, Camaleón wrote: On Tue, 21 Sep 2010 11:36:46 -0400, Rob Owens wrote: On Wed, Sep 22, 2010 at 01:18:21AM +1000, Scott Ferguson wrote: Disclaimer - I know nothing of gnome, but no one else has answered... I suspect you want the front-end (greeter) not the daemon but - see disclaimer :-) schema is possibly similar to 2.2, see:- http://live.gnome.org/GDM/2.22/Configuration Thanks! That website gave me the syntax I needed. All I had to do was make /etc/gdm3/daemon.conf look like this: [greeter] Exclude=myuser All that talk of schemas had me confused. I think I must speak a different language than the Gnome developers... That remebembers me... there used to be a GUI app to handle that (in gdm 2.x) that one could launch with gksu /usr/sbin/gdmsetup but the same app under gdm3 lacks for many of its features (in fact, it's pretty minimal). Greetings, Which remembers me - When I was doing a bit of a search last night I came across comments to the effect that gdm-setup(?) functionality will become part of the new Gnome shell. ...and my claim to know nothing of Gnome is not entirely correct - I am given to understand that it's some sort of a mouse house that you get if you install the stock Debian using the Enter key ;-p Cheers -- *In case you never receive this mail, please notify me immediately* -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c99b155.6090...@gmail.com
Strange behaviour in Debian Lenny
Dear, I have a strange behaviour in Debian Lenny. In /etc/rc2.d (default runlevel), some startup scripts run tice when booting. I've made a test script in /etc/init.d/echo.sh like: #!/bin/bash ### BEGIN INIT INFO # Provides: # Required-Start: # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Deferred execution scheduler # Description: Debian init script #scheduler ### END INIT INFO echo xxx /home/me/text With a softlink: lrwxrwxrwx 1 root root 17 2010-08-10 13:55 S30echo.sh - ../init.d/echo.sh The file /home/me/text exists and is empty. When I reboot the system /home/me/text looks like: xxx xxx So, the script runs twice. Any explanation for that? P. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktinvvco+pbappeib5i_c-lz7-deq5vm9sxkmj...@mail.gmail.com
Re: directly install RH packages using rpm instead of alien
T o n g wrote: Hi, We all know that, ,- | On Debian and derived systems it is recommended to use alien to | convert RPM packages into .deb format instead of bypassing the Debian | package management system by installing them directly with rpm. `- However, I'm wondering if it OK to install RH packages directly using rpm instead of going through alien convention. The reason that I'm asking is that, - I'm installing a preparatory sw. It is only available in RH/Suse rpm packages. - There is a complicated installation script (think of being more complicated than VMWare), and rpm installation is just one of its single line. - The only dependencies of the sw is actually JRE, so I'm hope I would avoid the infamous RH dependency hell. But there is still one dependency there, and I don't know how to satisfy that. Do you have any similar experiences? Thanks Yes - don't do it. ;-) Consider putting the application in a virtual machine, or asking the supplier for a proper Debian port? Berni -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c99b25b.7000...@elbournb.fsnet.co.uk
Re: Strange behaviour in Debian Lenny
On 22/09/10 17:35, polloxx wrote: Dear, I have a strange behaviour in Debian Lenny. In /etc/rc2.d (default runlevel), some startup scripts run tice when booting. I've made a test script in /etc/init.d/echo.sh like: #!/bin/bash ### BEGIN INIT INFO # Provides: # Required-Start: # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Deferred execution scheduler # Description: Debian init script #scheduler ### END INIT INFO echo xxx /home/me/text With a softlink: lrwxrwxrwx 1 root root 17 2010-08-10 13:55 S30echo.sh - ../init.d/echo.sh The file /home/me/text exists and is empty. When I reboot the system /home/me/text looks like: xxx xxx So, the script runs twice. Any explanation for that? P. If the script is run twice whack a timestamp in and see what it says. Do you have insserv installed?? Cheers -- *In case you never receive this mail, please notify me immediately* -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c99b504.6010...@gmail.com
Re: wireless adapters
Am Dienstag, 21. September 2010 schrieb Geoff Simmons: Hi Bill, On Mon, Sep 20, 2010 at 11:12:48PM -0500, William Kindler wrote: I have a USB device which is a D-Link DWA-130, and a PCI adapter which is a Netgear WN311T. [...] Does anyone know if either or both of these devices are supported with Debian? The D-Link DWA-130 has had a number of hardware revisions: - Revision A1 (USB ID 07d1:3b11) contains a Marvell 88W8360 chipset, which has no native driver available. You would need to use NDISwrapper[1] for device support. - Revision B (USB ID 07d1:3c13) is supported by the rt2800usb driver, which is included in the mainline Linux kernel since 2.6.31. For Lenny, you can acquire backported 2.6.32 linux-image packages from Debian Backports[2]. The firmware-ralink package from lenny-backports will also need to be installed. - Revision C1 (USB ID 2001:3301) is supported by the rtl8192u[3] driver. - Revision C2 (USB ID 07d1:3302) and revision E (USB ID 07d1:3300) are supported by the rtl8192su[3] driver. - Revision D (USB ID 07d1:3a0f) contains an Atheros AR9001U chipset, which is not currently claimed by the ar9170usb[4] driver in Debian Linux kernel images. After using modprobe to insert ar9170usb, you can try executing echo 07d1 3a0f /sys/bus/usb/drivers/ar9170usb/new_id to inform the driver of this device. The Netgear WN311T (PCI ID 11ab:2a02) contains a Marvell 88W8361 chipset, which has no native driver available; NDISwrapper[1] would be required for device support. If so could you tell me where the drivers can be obtained, and where to install them, if they are not native to the Debian distribution? For your DWA-130 device, determine its USB ID (you can use lsusb from the usbutils package), then refer to the respective page on the Debian wiki. Geoff [1] http://wiki.debian.org/NdisWrapper [2] http://wiki.debian.org/Backports [3] http://wiki.debian.org/rtl819x [4] http://wiki.debian.org/ar9170usb Hi, maybe this one might help: http://wiki.ubuntuusers.de/WLAN/Karten/D-Link Since I have been trying in vain to get my Squeeze 2.6.32-5-686 run one of those adaptors: {USB_DEVICE(0x07D1,0x3c09)}, /* D-Link System DWA-140 RangeBooster N Adapter(rev.B1) [Ralink RT2870] */ {USB_DEVICE(0x0DF6,0x0040)}, /* Sitecom WL-344 Wireless USB Adapter 300N X2*/ I would like to ask the question the other way round. Is anybody out there running Squeeze 2.6.32-5-686 on a desktop using a wlan- usb-adaptor at 54 or better at 300 N successfully? Which brand of USB-adaptor? Configuration? I'll go out and buy this one instead of fooling around with the above mentioned. Reason why: a friend of mine told me, that these parts of the kernel are older than the adaptors and so don't support recent adaptors. True? Thanks and regards Bernd http://wiki.debian.org/rt2860sta http://www.ralinktech.com/support.php?s=2 http://wiki.ubuntuusers.de/WLAN/Ralink#RT28xx-Draft-N http://forum.ubuntuusers.de/topic/d-link-dwa-140-wir-nicht- erkannt/3/#post-2382139 http://forum.ubuntuusers.de/topic/usb-wlan-adapter-wird-nicht- erkannt-1/#post-2542588 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009220958.32454.b_kl...@web.de
Empathy + theme ?
Hello all debians.. i;m using debian squeeze... with LXDE desktop. running on kernel 2.6.34 i'm still a newbies. i d0nt know where to ask this question.. then i decide to ask in my mailing list of debian. can i change my empathy theme ? i found only 4 theme avalable as default. - blue - classic - clean - simple it's another way that i can add another theme ? thanks for read.. hope someone will teach me :) -- * HTTP://WWW.MASOKIS.COM *
Re: gdm3 exclude certain usernames
On Wednesday 22 September 2010 08:33:41 Scott Ferguson wrote: Which remembers me Scott, That's not fair. :-( Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009220954.21969.lisi.re...@gmail.com
Re: Empathy + theme ?
On Wed, 22 Sep 2010 16:43:55 +0800, Masokis Programmer wrote: can i change my empathy theme ? i found only 4 theme avalable as default. (...) Check out this: http://live.gnome.org/Empathy/Themes Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.22.08.59...@gmail.com
20% rabatt: Visitkort, dekaler och banderoller!
20% rabatt: Visitkort, dekaler och banderoller! Kan du inte läsa mailet? Klicka här http://events.maildirect.se/30/Show.aspx?AccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96för att visa det som webbsida http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2fAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Visitkort Trycksaker Almanackor http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fvisitkort.se%2falmanacka.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Brevpapper http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2fbrevpapper.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 CD/DVD/VHS Omslag http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2fomslag.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Efterbehandling http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2flaminering_spiralbindning_limning.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Konferensblock http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2fkonferensblock.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Kort http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2fkort.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Kuvert http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2fkuvert.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Logotypedesign http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2fdesign-logotyp-logotype-logo-logga-loga.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Reklamblad http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2freklamblad_flygblad.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Tejp med tryck http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2ftejp_med_tryck.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Tryck kopiering http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fvisitkort.se%2ftryckeri-tryck-tryckerier-kopiering-fargkopiering.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Visitkort http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2fvisitkort.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Isskrapor http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2fisskrapor.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 T-shirts http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2ft-shirt.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Storbild Rollup http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2frollup_roll_up_rollups_display_massa.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Banderoller http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2fbanderoll_banderoller_billiga.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Affischer http://events.maildirect.se/30/Click.aspx?Url=http%3a%2f%2fwww.visitkort.se%2fposter_affisch_posters_reklam.shtmlAccountId=3c6d46cf-bcc5-47ae-8eb0-0f5faf13ed3bIssueId=4be6f2a4-5678-40ff-be7c-dcbd2dd10142ContactId=6d7a62f3-00e3-4517-a784-27d4b077ab96 Vepor
OpenIPMI in Lenny is mysterious to me.
Hello list, I am admittedly hopelessly noob with IPMI, though I don't think I'm too noob with Linux in general, I apologise if any of my questions are elementary. I've googled this ad nauseum so I've come here for some help with this. After installing ipmitool and openipmi in Lenny I am faced with a perplexing issue. From the get-go, I could not achieve the results I was seeking. Time to start ipmi: # modprobe -a ipmi-si ipmi-devintf which results with the following STDERR: WARNING: Error inserting ipmi_devintf (/lib/modules/2.6.26-2-amd64/kernel/drivers/char/ipmi/ipmi_devintf.ko): Unknown symbol in module, or unknown parameter (see dmesg) Then, in dmesg I see this: [1012115.045436] ipmi message handler version 39.2 [1012115.048311] IPMI System Interface driver. [1012115.048315] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [1012115.227703] ipmi: Found new BMC (man_id: 0x000157, prod_id: 0x003e, dev_id: 0x21) [1012115.227703] IPMI kcs interface initialized [1012115.235704] ipmi_devintf: Unknown symbol compat_alloc_user_space # lsmod|grep ipmi returns: ipmi_si43628 0 ipmi_msghandler38520 1 ipmi_si It looks like ipmi_devintf doesn't get loaded and from what I've seen in the scarce examples that I've found, it should be loaded in order for IPMI to function, as it creates the related device under /dev. Running ipmitool to test functionality returns this: # ipmitool sdr Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory Get Device ID command failed Unable to open SDR for reading At this point, I sit confused, as the documentation is sparse and I'm unsure if this is a problem with hardware detection that the module is attempting to run the ipmi layer on or if there is a problem with the kernel in Lenny. Though, I'm surprised that the keywords debian ipmi and lenny ipmi returns almost nothing useful or relevant in google. Oh I suppose I should shoot out some facts: Running Debian Lenny amd64, on an Intel S5520HCR motherboard. If anyone has any experience with ipmi, I would certainly appreciate some feedback. TIA. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c99c449@lodgingcompany.com
Re: OpenIPMI in Lenny is mysterious to me.
On 22/09/10 18:54, Dan Serban wrote: Hello list, I am admittedly hopelessly noob with IPMI, though I don't think I'm too noob with Linux in general, I apologise if any of my questions are elementary. I've googled this ad nauseum so I've come here for some help with this. After installing ipmitool and openipmi in Lenny I am faced with a perplexing issue. From the get-go, I could not achieve the results I was seeking. Time to start ipmi: # modprobe -a ipmi-si ipmi-devintf which results with the following STDERR: WARNING: Error inserting ipmi_devintf (/lib/modules/2.6.26-2-amd64/kernel/drivers/char/ipmi/ipmi_devintf.ko): Unknown symbol in module, or unknown parameter (see dmesg) Then, in dmesg I see this: [1012115.045436] ipmi message handler version 39.2 [1012115.048311] IPMI System Interface driver. [1012115.048315] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [1012115.227703] ipmi: Found new BMC (man_id: 0x000157, prod_id: 0x003e, dev_id: 0x21) [1012115.227703] IPMI kcs interface initialized [1012115.235704] ipmi_devintf: Unknown symbol compat_alloc_user_space # lsmod|grep ipmi returns: ipmi_si43628 0 ipmi_msghandler38520 1 ipmi_si It looks like ipmi_devintf doesn't get loaded and from what I've seen in the scarce examples that I've found, it should be loaded in order for IPMI to function, as it creates the related device under /dev. Running ipmitool to test functionality returns this: # ipmitool sdr Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory Get Device ID command failed Unable to open SDR for reading At this point, I sit confused, as the documentation is sparse and I'm unsure if this is a problem with hardware detection that the module is attempting to run the ipmi layer on or if there is a problem with the kernel in Lenny. Though, I'm surprised that the keywords debian ipmi and lenny ipmi returns almost nothing useful or relevant in google. Oh I suppose I should shoot out some facts: Running Debian Lenny amd64, on an Intel S5520HCR motherboard. If anyone has any experience with ipmi, I would certainly appreciate some feedback. TIA. No recent experience - and none configuring or installing it (IBM in-house system) - so if that doesn't qualify, read no further. My first thought would be to try load the modules separately:- #modprobe ipmi-si #dmesg | tail #modprobe ipmi-devintf etc.. for more clues also try the same approach with the --show-depends or -f if you're game. Have you been through the IBM documentation? I'm presuming you've been through the projects bug tracker (http://sourceforge.net/tracker/?group_id=36127atid=416298) and support requests for clues (also see their forums) (http://sourceforge.net/tracker/?group_id=36127atid=416299) By sparse documentation are you referring to the man or the projects pdf? IBM have/had a lot of documentation - don't know how much is available online (I don't have Red Book access here). Cheers -- *In case you never receive this mail, please notify me immediately* -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c99d4a5.5020...@gmail.com
Lenny: howto install other packages then the default ones ???
Hi, I have a pretty anoying problem. We have just installed a new server to replace an older one. For this one, we have chosen Deian Lenny instead of Debian Etch Now we have a problem with mrtg, more specially the rrd-part of it. The bug is know. It exists in rrdtool 1.3.1-4 and seams to be solved in 1.3.7-1. So how do I upgrade Lenny to this new version of rrd-tool? Remove it and create it from source? The packages impacted are librrd4 linrrds-perl rrdtool (all running 1.3.1-4). Cheerio! Kr. Bonne. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/i7cjnr$4b...@dough.gmane.org
Re: Lenny: howto install other packages then the default ones ???
Kristoff Bonne wrote: Hi, I have a pretty anoying problem. We have just installed a new server to replace an older one. For this one, we have chosen Deian Lenny instead of Debian Etch Now we have a problem with mrtg, more specially the rrd-part of it. The bug is know. It exists in rrdtool 1.3.1-4 and seams to be solved in 1.3.7-1. So how do I upgrade Lenny to this new version of rrd-tool? Remove it and create it from source? The packages impacted are librrd4 linrrds-perl rrdtool (all running 1.3.1-4). Cheerio! Kr. Bonne. Try the shiny new official Debian backports service: http://packages.debian.org/search?keywords=rrdtool http://wiki.debian.org/Backports Berni -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c99d88e.6040...@elbournb.fsnet.co.uk
Re: Strange behaviour in Debian Lenny
On Wed, Sep 22, 2010 at 9:49 AM, Scott Ferguson prettyfly.producti...@gmail.com wrote: On 22/09/10 17:35, polloxx wrote: Dear, I have a strange behaviour in Debian Lenny. In /etc/rc2.d (default runlevel), some startup scripts run tice when booting. I've made a test script in /etc/init.d/echo.sh like: #!/bin/bash ### BEGIN INIT INFO # Provides: # Required-Start: # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Deferred execution scheduler # Description: Debian init script # scheduler ### END INIT INFO echo xxx /home/me/text With a softlink: lrwxrwxrwx 1 root root 17 2010-08-10 13:55 S30echo.sh - ../init.d/echo.sh The file /home/me/text exists and is empty. When I reboot the system /home/me/text looks like: xxx xxx So, the script runs twice. Any explanation for that? P. If the script is run twice whack a timestamp in and see what it says. The result is: Wed Sep 22 12:15:44 CEST 2010 Wed Sep 22 12:16:52 CEST 2010 Do you have insserv installed?? No. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktin6mfaoqyfnoczeyopehqzpggweoxntrxzv5...@mail.gmail.com
Re: Lenny: howto install other packages then the default ones ???
Hi Berni, Works like a charm. Thanks! Cheerio! Kr. Bonne. Op 22-09-10 12:21, Berni Elbourn schreef: Kristoff Bonne wrote: Hi, I have a pretty anoying problem. We have just installed a new server to replace an older one. For this one, we have chosen Deian Lenny instead of Debian Etch Now we have a problem with mrtg, more specially the rrd-part of it. The bug is know. It exists in rrdtool 1.3.1-4 and seams to be solved in 1.3.7-1. So how do I upgrade Lenny to this new version of rrd-tool? Remove it and create it from source? The packages impacted are librrd4 linrrds-perl rrdtool (all running 1.3.1-4). Cheerio! Kr. Bonne. Try the shiny new official Debian backports service: http://packages.debian.org/search?keywords=rrdtool http://wiki.debian.org/Backports Berni -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c99db97.3090...@skypro.be
Re: Strange behaviour in Debian Lenny
On 22/09/10 20:26, polloxx wrote: On Wed, Sep 22, 2010 at 9:49 AM, Scott Ferguson prettyfly.producti...@gmail.com wrote: On 22/09/10 17:35, polloxx wrote: Dear, I have a strange behaviour in Debian Lenny. In /etc/rc2.d (default runlevel), some startup scripts run tice when booting. /snip If the script is run twice whack a timestamp in and see what it says. The result is: Wed Sep 22 12:15:44 CEST 2010 Wed Sep 22 12:16:52 CEST 2010 Do you have insserv installed?? No. K. So some scripts do run twice. (1x1) Give me half an hour or so to finish dinner and have a dig through my old boot timing logs. I've seen something similar when I was working on making a laptop boot up faster turned out it was normal. Just need to check whether it is the same scripts running twice. Cheers -- *In case you never receive this mail, please notify me immediately* -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c99dfe2.9050...@gmail.com
Release File Expired on: csclub.uwaterloo.ca
Hello, I am not really sure to whom I should inform, but it is my understanding that mirror.csclub.waterloo.ca is (or at least was) an official Debian mirror in Canada. I am in no way affiliated with the Waterloo university or aware of a contact for the mirror. It appears as if their apt-repo has expired in some way? After changing my sources to point to http.us.debian.org, the error went away immediately. I thought I should mention it hear, as I am hoping at least one of the more enlighten Debian user might know whats going on, or what can be done to get the mirror back up! Thanks -M attachment: csclub.uwaterloo.ca.png
Re: Strange behaviour in Debian Lenny
On 22/09/10 20:26, polloxx wrote: On Wed, Sep 22, 2010 at 9:49 AM, Scott Ferguson prettyfly.producti...@gmail.com wrote: On 22/09/10 17:35, polloxx wrote: Dear, I have a strange behaviour in Debian Lenny. In /etc/rc2.d (default runlevel), some startup scripts run tice when booting. /snip Mea culpa - I may have given you bum steer earlier. I managed to locate boottimes05 chart but can see no duplicated services in it - (though I would have fixed those in runs 00 through 02), *and* those charts were done with Debian4 :-( I think one of the scripts that was run twice was hwclocksomething. I used boottimes (pulled from Xandros), though Lenny provides bootchart which has similar functionality, and should allow you to (at least) find the duplicated services a little easier than digging through run levels. Cheers -- *In case you never receive this mail, please notify me immediately* -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c99f119.2040...@gmail.com
Re: directly install RH packages using rpm instead of alien
On Tue, Sep 21, 2010 at 11:16 PM, T o n g mlist4sunt...@yahoo.com wrote: However, I'm wondering if it OK to install RH packages directly using rpm instead of going through alien convention. Do you have any similar experiences? Yes, one time my girlfriend put diesel into our gasoline powered car. I didn't think this was possible, but she managed to find a way. Regardless of whether you can or cannot do the same with your car, I would advise against it. The results were not pretty. Best, AM -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktinvsvfp1fk+bil-it899ssb7ynfymez5ppnj...@mail.gmail.com
Re: OpenIPMI in Lenny is mysterious to me.
Sorry for top post, I'm on a mobile. My experience is with HP Proliant G4 and G5 servers. In the G4 seriers IMPI compatible HW interface is not present on the BIOS then also not present in operating system. While in G5 servers, in the BIOS you can active the Health Interface and it is detected by the devintf kernel module. To use the MPI devintf module (I'm almost sure) you have to be sure that in your BIOS is present a compatible IMPI interface for monitoring low level system resources. Bye. You don't know where your shadow will fall, Somebody.- Olaf Reitmaier Veracierta (BB) ola...@gmail.com http://olafrv.googlepages.com -Original Message- From: Scott Ferguson prettyfly.producti...@gmail.com Date: Wed, 22 Sep 2010 20:04:21 To: debian-user@lists.debian.org Subject: Re: OpenIPMI in Lenny is mysterious to me. On 22/09/10 18:54, Dan Serban wrote: Hello list, I am admittedly hopelessly noob with IPMI, though I don't think I'm too noob with Linux in general, I apologise if any of my questions are elementary. I've googled this ad nauseum so I've come here for some help with this. After installing ipmitool and openipmi in Lenny I am faced with a perplexing issue. From the get-go, I could not achieve the results I was seeking. Time to start ipmi: # modprobe -a ipmi-si ipmi-devintf which results with the following STDERR: WARNING: Error inserting ipmi_devintf (/lib/modules/2.6.26-2-amd64/kernel/drivers/char/ipmi/ipmi_devintf.ko): Unknown symbol in module, or unknown parameter (see dmesg) Then, in dmesg I see this: [1012115.045436] ipmi message handler version 39.2 [1012115.048311] IPMI System Interface driver. [1012115.048315] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [1012115.227703] ipmi: Found new BMC (man_id: 0x000157, prod_id: 0x003e, dev_id: 0x21) [1012115.227703] IPMI kcs interface initialized [1012115.235704] ipmi_devintf: Unknown symbol compat_alloc_user_space # lsmod|grep ipmi returns: ipmi_si43628 0 ipmi_msghandler38520 1 ipmi_si It looks like ipmi_devintf doesn't get loaded and from what I've seen in the scarce examples that I've found, it should be loaded in order for IPMI to function, as it creates the related device under /dev. Running ipmitool to test functionality returns this: # ipmitool sdr Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory Get Device ID command failed Unable to open SDR for reading At this point, I sit confused, as the documentation is sparse and I'm unsure if this is a problem with hardware detection that the module is attempting to run the ipmi layer on or if there is a problem with the kernel in Lenny. Though, I'm surprised that the keywords debian ipmi and lenny ipmi returns almost nothing useful or relevant in google. Oh I suppose I should shoot out some facts: Running Debian Lenny amd64, on an Intel S5520HCR motherboard. If anyone has any experience with ipmi, I would certainly appreciate some feedback. TIA. No recent experience - and none configuring or installing it (IBM in-house system) - so if that doesn't qualify, read no further. My first thought would be to try load the modules separately:- #modprobe ipmi-si #dmesg | tail #modprobe ipmi-devintf etc.. for more clues also try the same approach with the --show-depends or -f if you're game. Have you been through the IBM documentation? I'm presuming you've been through the projects bug tracker (http://sourceforge.net/tracker/?group_id=36127atid=416298) and support requests for clues (also see their forums) (http://sourceforge.net/tracker/?group_id=36127atid=416299) By sparse documentation are you referring to the man or the projects pdf? IBM have/had a lot of documentation - don't know how much is available online (I don't have Red Book access here). Cheers -- *In case you never receive this mail, please notify me immediately* -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c99d4a5.5020...@gmail.com
Re: wireless adapters
On Wednesday 22 September 2010 03:58:32 Bernd Kloss wrote: Am Dienstag, 21. September 2010 schrieb Geoff Simmons: Hi Bill, On Mon, Sep 20, 2010 at 11:12:48PM -0500, William Kindler wrote: I have a USB device which is a D-Link DWA-130, and a PCI adapter which is a Netgear WN311T. [...] As others have suggested, if you can't get it working with a native linux driver, try installing ndiswrapper and a WinXP driver. It's pretty straightforward. FWIW, I recently bought a used laptop from a colleague, and bought a D- Link WNA 1330 (pcmcia) for about $18 US. The linux driver would detect and initialize the card, but it wouldn't recognize any wireless networks. (I spent quite a bit of time trying to get it to work). It works fine with ndiswrapper, though. -Chris | Christopher Judd, Ph. D. | | Research Scientist III | | NYS Dept. of Health j...@wadsworth.org | | Wadsworth Center - ESP | | P. O. Box 509518 486-7829 | | Albany, NY 12201-0509 | IMPORTANT NOTICE: This e-mail and any attachments may contain confidential or sensitive information which is, or may be, legally privileged or otherwise protected by law from further disclosure. It is intended only for the addressee. If you received this in error or from someone who was not authorized to send it to you, please do not distribute, copy or use it or any attachments. Please notify the sender immediately by reply e-mail and delete this from your system. Thank you for your cooperation. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201009220847.10237.j...@wadsworth.org
Re: gdm3 exclude certain usernames
On Wed, Sep 22, 2010 at 3:54 AM, Lisi lisi.re...@gmail.com wrote: On Wednesday 22 September 2010 08:33:41 Scott Ferguson wrote: Which remembers me Scott, That's not fair. :-( Lisi Yes, to which I would add that even though Scott's command of the English language is far superior, or so I am given to understand, as the only people I know who use such phrases as I am given to understand are scholars or pretentious or both, however the OP can take solace in the fact that he was able to more clearly communicate his meaning, despite his apparent disadvantage to the learned scholar Scott, whose mouse house comments remain a mystery to me. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktin6kges8n1wndc+h1qvrthc7m0_2mzz=crw4...@mail.gmail.com
Re: Release File Expired on: csclub.uwaterloo.ca
On Wed, 22 Sep 2010 07:38:42 -0400 (EDT), Mike Viau wrote: I am not really sure to whom I should inform, but it is my understanding that mirror.csclub.waterloo.ca is (or at least was) an official Debian mirror in Canada. I am in no way affiliated with the Waterloo university or aware of a contact for the mirror. It appears as if their apt-repo has expired in some way? After changing my sources to point to http.us.debian.org, the error went away immediately. I thought I should mention it hear, as I am hoping at least one of the more enlighten Debian user might know whats going on, or what can be done to get the mirror back up! The official list of all public Debian mirrors is published here: http://www.debian.org/mirrors/list If the mirror is listed here, which it does not appear to be, then you should report problems with official public Debian mirrors on the debian-mirrors mailing list. If the mirror is not listed, then choose another one that is. It appears that the correct domain name is mirror.csclub.uwaterloo.ca (Note the u in front of waterloo, which is missing in your original post.) I'm not sure if you made a typo when posting or if you left off the u when actually trying to access the archive. -- .''`. Stephen Powell : :' : `. `'` `- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1030173881.181996.1285162443560.javamail.r...@md01.wow.synacor.com
Problem browsing samba shares in Squeeze
I've recently installed Debian Squeeze and copied my old working smb.conf over. I can add my samba share directly (using \\Desktop-2\share) , I can't browse for the share or find it in my Network Places. Any ideas what might be wrong? # cat /etc/samba/smb.conf [global] workgroup = Linux netbios name = Desktop security = share log level = 3 [share] path = /share read only = No guest only = Yes # smbclient -L Desktop-2 Domain=[LINUX] OS=[Unix] Server=[Samba 3.4.8] Sharename Type Comment - --- IPC$IPC IPC Service (Samba 3.4.8) share Disk Domain=[LINUX] OS=[Unix] Server=[Samba 3.4.8] Server Comment ---- DESKTOPSamba 3.4.8 WorkgroupMaster ---- LINUX -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikohfk4y-rxe_7tjvkw47zbdxunnu2qysea1...@mail.gmail.com
Re: OpenIPMI in Lenny is mysterious to me.
On Wed, 22 Sep 2010, Dan Serban wrote: [1012115.235704] ipmi_devintf: Unknown symbol compat_alloc_user_space This module and the running kernel are not compatible with each other. The CVE-2010-3081 fixes added to every distro kernel (and also to the latest stable kernels) changed the internal API and ABI. Anything that uses compat_alloc_user_space() needs to be recompiled, possibly with some source fixes (header file moved from asm/compat.h to linux/compat.h). -- One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie. -- The Silicon Valley Tarot Henrique Holschuh -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100922145428.gb5...@khazad-dum.debian.net
installing a kernel on other than the current partition
Hi, I may be all wet on this, but anyway: I have an exterior disk attached to my laptop from another system. On that disk I booted successfully a partition that has Debian kernel 2.6.32 installed on it. But I want to boot yet another partition that has my homegrown kernel on it. It won't boot because of the kernel CPU parameters that have 3dnow and that will not boot on this laptop. So I want to install a Debian kernel on that unbootable partition. But how to install a kernel on a partition that is not booted? With chroot? Is that ever done? I can copy files over but how to run initramfs? The 2 systems are Sid and similar except for a dist-upgrade. Thanks Hugo -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/i7d7v1$3k...@dough.gmane.org
Re: installing a kernel on other than the current partition
Hugo Vanwoerkom hvw59...@care2.com writes: So I want to install a Debian kernel on that unbootable partition. But how to install a kernel on a partition that is not booted? With chroot? Is that ever done? I've done it with chroot a few times. Should work generally just fine. If you are really desperate, boot it with qemu and install the package there. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/84vd5xzqr9@sauna.l.org
Newer kernels?
It seems that we (Debian) is falling further and further behind. The latest kernel in sid is 2.6.32+28, and I didn't see anything in experimental. Are we going to see any of the more recent kernels any time soon in Debian? Thanks, --b
protolo de autenticacion
Protocolo de autenticacion Tengo un PC con Debian Lenny y necesito conectarme por modem a mi ISP que usa Windows 2003 Server. El tema es que hasta donde se linux por lo menos Debian usa protocolos de autenticacion PAP, CHAP y Windows 2003 Server usa MS-CHAP V2. Yno puedo conectarme a mi ISP ya que no usan el mismo protocolo de autenticacion, Que puedo hacer para que mi Debian use MS-CHAP V2 y pueda conectarse a mi ISP???. Saludos Cosme -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/71693688f1084924b315b8fd5a9e7...@esid.gecgr.co.cu
Re: Newer kernels?
On Wed, Sep 22, 2010 at 1:35 PM, B. Alexander stor...@gmail.com wrote: It seems that we (Debian) is falling further and further behind. The latest kernel in sid is 2.6.32+28, and I didn't see anything in experimental. Are we going to see any of the more recent kernels any time soon in Debian? In experimental has this linux-2.6 (2.6.35-1~experimental.3) experimental; urgency=low Thanks, --b -- Robson Roberto Souza Peixoto Robinho robsonpeix...@gmail.com Computer Science Master's degree student, University of Campinas Linux Counter #395633 IRC: robsonpeixoto Twitter: http://twitter.com/rrspba
Restarting Networking in Debian
What is the deal now with 'restarting' networking services in Debian 5 Squeeze? I use to be able to run the command: /etc/init.d/networking restart Now when I do so in Debian, I get a strange error: Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces ... (warning). Reconfiguring network interfaces...done. Not to mention any changes I made to my static IP address in '/etc/network/interfaces' didn't take effect which leads me to believe the command I ran above didn't restart the network daemon or is not forcing it to look for changes. I asked on the forums and I can't get a straight answer as to what is the official command in Debian to restart the networking daemon? There can't be six different answers and someone on the dev team has to have a official correct command to do something as simple as restarting networking. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktin_c9ofyx_dfjs8ai3nj+nk8a6ybckug26gt...@mail.gmail.com
Re: Strange behaviour in Debian Lenny
On Wed, 22 Sep 2010 09:40:02 +0200 polloxx wrote: I have a strange behaviour in Debian Lenny. In /etc/rc2.d (default runlevel), some startup scripts run tice when booting. I've made a test script in /etc/init.d/echo.sh like: [...] So, the script runs twice. Any explanation for that? Wild guess: There is also a symlink in /etc/rc6.d, so when rebooting the script is in fact run twice: once from /etc/rc6.d, once from /etc/rc2.d. Cheers, Simon -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/i7dbfk$vch$0...@news.t-online.com
Re: Restarting Networking in Debian
On Wed, 22 Sep 2010 12:41:31 -0400, Carlos Mennens wrote: What is the deal now with 'restarting' networking services in Debian 5 Squeeze? I use to be able to run the command: /etc/init.d/networking restart Now when I do so in Debian, I get a strange error: Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces ... (warning). Reconfiguring network interfaces...done. Yep, I noticed in Squeeze yesterday. Not to mention any changes I made to my static IP address in '/etc/network/interfaces' didn't take effect which leads me to believe the command I ran above didn't restart the network daemon or is not forcing it to look for changes. I asked on the forums and I can't get a straight answer as to what is the official command in Debian to restart the networking daemon? There can't be six different answers and someone on the dev team has to have a official correct command to do something as simple as restarting networking. The only two available options seem to be stop|start, so... /etc/init.d/networking stop /etc/init.d/networking start ...should do the trick. It would be nice to know the reason for the restart deprecation, though. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.09.22.17.05...@gmail.com
Re: Restarting Networking in Debian
On 09/22/2010 12:41 PM, Carlos Mennens wrote: What is the deal now with 'restarting' networking services in Debian 5 Squeeze? I use to be able to run the command: /etc/init.d/networking restart Now when I do so in Debian, I get a strange error: Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces ... (warning). Reconfiguring network interfaces...done. It has been discussed here before. You might want to go, as many do, to the list archives for the complete story. Google would have found your answer as well invoke-rc.d networking restart apt-cache search invoke-rc.d /usr/sbin/invoke-rc.d dpkg -S /usr/sbin/invoke-rc.d sysv-rc dpkg -l sysv-rc ii sysv-rd 2.88dsf-12 System-V-like runlevel change mechanism Wayne -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c9a383d.7000...@gmail.com
mrtg does not change mtime (was: Lenny: howto install other packages then the default ones ???)
Hi, Well, the package upgrade worked like a charm; but the problem itself is not gone. It's very strange. We are using this server for mrtg, which creates .rrd files in the background. The first time we run mrtg with a new configuration-file, it creates the .rrd file correctly. So far, so good. However, when we run mrtg a second time, the file is not changed. At least, that how it looks. A stat and 'ls-' says that the mtime and ctime of the file has not changed. However, when we loook inside the .rrd file (rrdtool dump ...) and look at the last changed information; that does is changed. And also the new data in inserted into the rrd database. When we try it with other applications (like echo or vi) we do not have this problem. Now, for us, it is a real problem as we also have some scripts that do a cleanup from time to time (i.e. remove all .rrd files that have not changed in the last 2 months using a find) and all these scripts no will fail. Very strange!!! :-( Cheerio! Kr. Bonne. Op 22-09-10 12:33, Kristoff Bonne schreef: Hi Berni, Works like a charm. Thanks! Cheerio! Kr. Bonne. Op 22-09-10 12:21, Berni Elbourn schreef: Kristoff Bonne wrote: Hi, I have a pretty anoying problem. We have just installed a new server to replace an older one. For this one, we have chosen Deian Lenny instead of Debian Etch Now we have a problem with mrtg, more specially the rrd-part of it. The bug is know. It exists in rrdtool 1.3.1-4 and seams to be solved in 1.3.7-1. So how do I upgrade Lenny to this new version of rrd-tool? Remove it and create it from source? The packages impacted are librrd4 linrrds-perl rrdtool (all running 1.3.1-4). Cheerio! Kr. Bonne. Try the shiny new official Debian backports service: http://packages.debian.org/search?keywords=rrdtool http://wiki.debian.org/Backports Berni -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/i7dgl3$fp...@dough.gmane.org
[bash] script (redirect output) to file and email
Hi folks! :-) I try to redirect output of this script to file (using tee) and also send it to mail the script deletes files older than 150days: find /share/.trash/ -type f -atime +150 -exec rm -fr {} \; how can I do this? thanks! Pol -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/6da1b68db66a3b6a377091b6f170e6ad.squir...@fuckaround.org
Will Multi-Monitor work with my setup?
Off-and-on for the past two years I've had multi-display working; for the past year, nada. It worked until an update on my Sid box. Since then, I've tried wiping my drive and reinstalling Stable, and swapping out between my three available cards. A lot of the problem is that I don't know what's the current way to do things; I used to use Xinerama, but that's been deprecated, and the docs I've found on xRandR don't answer the questions I have, etc. Another part of the problem may be that I've got old video cards (but they used to work!!!). Here's what I've got: we...@westek:~$ lspci | grep VGA 00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2) 04:06.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000] (rev c1) I've tried every variation of xorg.conf I can think of (nv, vesa, nouveau as the drivers; blacklisting nouveau in /etc/modules/blacklist; Xinerama on; Xinerama off; etc etc etc), and I get one of four results: * first monitor displays a working X session (at various resolution capabilities, depending on the driver used) and the second monitor stays dark * first monitor displays a working X session (at various resolution capabilities, depending on the driver used) and the second monitor shows the video card's splash screen but doesn't participate otherwise as an X screen. * same as above until I open an app a half minute after the screen appears (or maybe it's just a half-minute after the screen appears) and the machine locks up hard (at console; I can still get to it via ssh usually) * the machine locks up hard before an X screen shows (at console - I can still get to it via ssh usually) Can anyone give me a definitive answer that this hardware will work in multi-display format? Can anyone give me a definitive answer how to make it work? When I get the first monitor working, I can run xrandr -1, and the screen goes blank for 3 or 5 seconds, and then reports: we...@westek:~$ xrandr -q Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 4096 x 4096 VGA-1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x60075.0 60.3 640x48075.0 60.0 720x40070.1 DVI-D-1 disconnected (normal left inverted right x axis y axis) TV-1 disconnected (normal left inverted right x axis y axis) As far as I can tell, xrandr only sees one card, only sees one monitor. Thanks for any help! -- Kent West*))) http://kentwest.blogspot.com Praise Yah! \o/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c9a46f3.2010...@acu.edu
Re: installing a kernel on other than the current partition
Timo Juhani Lindfors wrote: Hugo Vanwoerkom hvw59...@care2.com writes: So I want to install a Debian kernel on that unbootable partition. But how to install a kernel on a partition that is not booted? With chroot? Is that ever done? I've done it with chroot a few times. Should work generally just fine. If you are really desperate, boot it with qemu and install the package there. I hadn' t thought of using qemu. Interesting. Thanks Hugo -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/i7dh1o$ho...@dough.gmane.org
Re: Restarting Networking in Debian
On 09/22/2010 12:09 PM, Wayne Topa wrote: On 09/22/2010 12:41 PM, Carlos Mennens wrote: What is the deal now with 'restarting' networking services in Debian 5 Squeeze? I use to be able to run the command: /etc/init.d/networking restart Now when I do so in Debian, I get a strange error: Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces ... (warning). Reconfiguring network interfaces...done. It has been discussed here before. You might want to go, as many do, to the list archives for the complete story. Google would have found your answer as well invoke-rc.d networking restart But I'm glad it was asked here. I had noticed the same behavior several months ago, but just worked around it. I'm glad to see an answer fly by me when I wasn't looking for it. However, when I run this command: we...@westek:~$ sudo invoke-rc.d networking restart [sudo] password for westk: Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces ... (warning). Reconfiguring network interfaces...done. Seems like we still get a deprecation message. And, I'm still curious about why the change, and why when something is deprecated, the coders will bother to say the instruction is deprecated but don't give any clue as to what to use instead. I also found the /etc/init.d/foo method to be semi-intuitive, in that you just had to look in /etc/init.d to see what scripts were available to run. How am I supposed to know what to feed to invoke-rc.d? Does this take the same scripts in /etc/init.d/ as its parameter? And lastly, a .d at the end of a name makes me think of a directory rather than an executable; whereas I can see that the name of this executable refers to the scripts in a rc.d directory perhaps, it's not an intuitive thing, to me at least. -- Kent West*))) http://kentwest.blogspot.com Praise Yah! \o/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c9a4932.8050...@acu.edu
Re: [bash] script (redirect output) to file and email
Pol Hallen: I try to redirect output of this script to file (using tee) and also send it to mail the script deletes files older than 150days: find /share/.trash/ -type f -atime +150 -exec rm -fr {} \; - atime finds files *last accessed* 150 days ago. You probably need mtime instead. I am not even sure whether running the script will change the atime of all files in the directory and thus prevent anything in it to be deleted. You should make sure that the filesystem is not mounted with relatime or noatime as well when using atime. - You are starting an rm process for every file to delete. You can end the command with + instead of \; to make find pass as many files to rm as possible. If you delete many files that way, that may make a big difference spped-wise. - Do you want to have the list mailed as an attachment? -Then I would just redirect the output to a file and use mutt's batch mode to send the file (mutt -x -a $file). - Otherwise, I would still redirect first and then send the mail as an additional step: find … file mail -s $subject $recipient file - If you insist: find … | tee [-a] file | mail -s $subject $recipient tee -a appends to file, leaving out -a will overwrite file. J. -- I wish I had been aware enough to enjoy my time as a toddler. [Agree] [Disagree] http://www.slowlydownward.com/NODATA/data_enter2.html signature.asc Description: Digital signature
Re: Will Multi-Monitor work with my setup?
On 09/22/2010 01:37 PM, Andreas Ronnquist wrote: On Wed, 22 Sep 2010 13:12:03 -0500 Kent Westwe...@acu.edu wrote: Off-and-on for the past two years I've had multi-display working; for the past year, nada. It worked until an update on my Sid box. Since then, I've tried wiping my drive and reinstalling Stable, and swapping out between my three available cards. A lot of the problem is that I don't know what's the current way to do things; I used to use Xinerama, but that's been deprecated, and the docs I've found on xRandR don't answer the questions I have, etc. Another part of the problem may be that I've got old video cards (but they used to work!!!). Hi! I have a fully working dual-screen setup, but I am using the closed-source binary blob, downloaded directly from Nvidia - I don't know if that is an option for you. Also, I am on testing, and not unstable, but the differences shouldn't be very big nowadays if I understand things correctly. I have an xorg.conf setup that I have used on several cards - currently on an 7950GT, previously on an 8600gts, and if my memory serves me well, I used it for dualscreen on my previos Geforce 4Ti also. I attach my xorg.conf, maybe you can get something useful out of it. xrandr -q reports only one screen, even if it is a dual screen setup: xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 2560 x 1024, maximum 2560 x 1024 default connected 2560x1024+0+0 0mm x 0mm 2560x1024 50.0* 1280x1024 51.0 2048x768 52.0 1024x768 53.0 1600x600 54.0 800x60055.0 640x48056.0 (and the frequencies all wrong). Hope this helps somewhat. Take a look at my xorg.conf and you might get something useful out of it. best regards No; I tried copying/pasting some of your config into mine (making necessary changes, as far as I can tell), but I can't even get X to start with that config. Now that I'm responding to your post, I almost have a vague recollection of seeing somewhere that the current X drivers no longer support more than one video card, so it may be that I'll have to replace my two cards with a single dual-head card in order to get multi-display support back. If that's true, it frustrates me, because it seems like Debian thus is losing capability. (Although I fully understand the need to sometimes just cut the cord on old legacy technology.) But it does help that you told me that xrandr -q only reports one screen even in a dual-screen setup. Thanks! -- Kent West*))) http://kentwest.blogspot.com Praise Yah! \o/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c9a592a.1020...@acu.edu
Re: Debian not running in Windoof 7 Virtual PC (in VirtualBox)
On 9/21/2010 6:51 AM, Scott Ferguson wrote: To satisfy my curiosity I have been trying (without success) to get Debian installed and running in Windoof 7 Virtual PC. What I have discovered is that:- 1. If you run Windoof 7 in VirtualBox (under Debian) it runs fine - given an inordinate amount of RAM. However it immediately freezes when I attempt to start the W7VPC. H... I am probably way late on this one, but that maneuver is a nonstarter. Nested Virtualization is very difficult and kind of pointless. A few security researchers[0] have done it, mostly as a stunt to prove a technical point, but it is very unstable. You *can* run DOSbox in a VM, but generally the question is, why would you? 0. Google Joanna Rutkowska, Blue Pill -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c9a5937.1030...@allums.com
Re: installing a kernel on other than the current partition
Hugo Vanwoerkom wrote: Timo Juhani Lindfors wrote: Hugo Vanwoerkom hvw59...@care2.com writes: So I want to install a Debian kernel on that unbootable partition. But how to install a kernel on a partition that is not booted? With chroot? Is that ever done? I've done it with chroot a few times. Should work generally just fine. That was surprisingly easy! I put linux-base_2.6.32-23_all.deb and linux-image-2.6.32-5-686_2.6.32-23_i386.deb in the root directory of the partition in question and then chrooted into it. Then I dpkg -i linux-base_2.6.32-23_all.deb and dpkg -i linux-image-2.6.32-5-686_2.6.32-23_i386.deb. They installed without a hitch and I was able to boot the partition! Hugo -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/i7dll9$8h...@dough.gmane.org
Re: Debian not running in Windoof 7 Virtual PC (in VirtualBox)
On 9/21/2010 6:51 AM, Scott Ferguson wrote: Someone with more knowledge of the history of Virtual PC may be able to explain those similarities. Microsoft did not create VPC, they bought it from Connectix. It's provenance probably includes a lot of old code from various places. I used to know more, but I can't recall, and I can't be bothered to Google it. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c9a5a57.3090...@allums.com
Squeeze. What is current hibernation mechanism?
Hello, list! If somebody please to explain current hibernation mechanism in Squeeze? If there are links to web docs about all this stuff? 1. Do I need a separate unformatted partition, which size is swap + RAM amount? 2. Do I need to install an additional util and any way to configure it? 3. Something else? Thanks in advance! --- Sincerely Yours' Mark Goldshtein -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktimmhsm_nknhcym_rrn3hg-m+i-wyabg71t1u...@mail.gmail.com