Re: tentative de DOS sur DNS, réponses?
Le Thu, 06 Feb 2014 22:09:49 +0100 David S ml+deb...@davidsanchez.fr a écrit: 1/ C'est l'attaque à la mode, avec NTP, les enfants jouent facilement avec hélas... 2/ Si tu sais quelles machines ont besoin du ntp/dns/autre_service_en_udp de ton serveur, le plus simple est de limiter via iptables/filter quelles ip ont le droit de causer sur les ports 53/123/etc, ainsi la requête ne finit pas au niveau de ton démon qui logue... Un article de Stéphane Bortzmeyer pour NTP : http://www.bortzmeyer.org/ntp-reflexion.html et DNS : http://www.bortzmeyer.org/dns-attaque-ns-point.html Pour NTP, je connaissais (j'ai 3 machines dans le pool NTP et j'essaye de faire attention) et je n'ai pas de souci,. Pour le DNS, j'avais pourtant fouillé le blog de Stéphane (j'ai même failli directement lui demander) pour retrouver cet article dont je me rappelais. L'attaque évoquée n'est pas celle là car les demandes concernent des machines exotiques et non la racine «.». Du coup j'ai épluché les logs car tout de même, j'ai du mal à croire que cela suffise à écrouler ma machine. Je me suis aperçu que le souci constaté sur le serveur NTP, que j'avais attribué à un délai dans la réponse, était en fait un crash noyau dans l'interruption correspondant à l'horloge système (sombre histoire de 32 bits, uptime et nombre de1/250 ième de seconde dans cet uptime). J'ai changé de noyau (c'était un vieux lenny 2.6.26 de toute façon). Ça devrait être réglé. Merci des réponses, ça m'a incité à éplucher les (longs) logs. François Boisson -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20140208102550.ace3ca6f408c7241e215e...@maison.homelinux.net
Re: exit Libre Office 3 pour Libre Office 4.1.4 sur squeeze
Le Fri, 07 Feb 2014 19:39:33 +0100 maderios mader...@gmail.com a écrit: Gnome n'est pas une dépendance indispensable pour Libreoffice. Par contre, un certain paquet de Libreoffice, libreoffice-gnome est sans doute dépendant de gnome. Je pense que gnome a un metapaquet ayant libreoffice dans ses dépendances. Virer libreofficie vire ce metpaquet et suggère de supprimer tous les autrespaquets en dépendances soit gnome. La solution consiste à passer les paquets dépendant de ce metapaquet en dépendance manuelle, en clair à faire un apt-get install de ces paquets avant de virer libreoffice. François Boisson -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20140208102934.b5e5ab1b0048a8d75ca05...@maison.homelinux.net
Re: Wayland sur Debian
Le 07/02/2014 23:00, RHATAY Sami a écrit : Hello tout le monde, je suis tombé sur cet article de linuxFR ( http://linuxfr.org/news/wayland-et-weston-1-4 ) à propos de la sortie récente de Wayland et Weston. Décrit dans l'article comme corrigeant pas mal de défauts de l'ancien et vieillissant X , j'étais curieux de savoir si des membres de la communauté avaient décidé de passer à Wayland ? Merci et bon début de weekend à tous! Bonjour, Wayland n'est pas vraiment une solution utilisable quotidiennement... Ce qu'il manque le plus, ce ne sont pas ses fonctionnalités, c'est surtout la compatibilité des grands environnement de bureau... Gnome et KDE travaillent à cette compatibilité... Pour les autres, c'est encore très divers, du support complet au travaux à peine commencé... Donc wait and see, je pense qu'il faut encore une petite année pour voir une possibilité d'utilisation quotidienne sur une machine de bureau ! Mes 2 cents Mourad -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/52f6049a.4060...@nativobject.net
Re: Wayland sur Debian
On 02/08/2014 11:19 AM, C. Mourad Jaber wrote: Wayland n'est pas vraiment une solution utilisable quotidiennement... Ce qu'il manque le plus, ce ne sont pas ses fonctionnalités, c'est surtout la compatibilité des grands environnement de bureau... Gnome et KDE travaillent à cette compatibilité... Pour les autres, c'est encore très divers, du support complet au travaux à peine commencé... Bonjour E18 et E19 (Enlightenment) ont intégré Wayland. Les dev y travaillent depuis E17. http://enlightenment.fr/2013/12/23/sortie-enlightenment-0-18-0/ https://fosdem.org/2014/schedule/event/enlightenment_standalone_wayland_compositor/ http://www.phoronix.com/scan.php?page=news_itempx=MTU3MTc http://www.phoronix.com/scan.php?page=news_itempx=MTQ0MzA -- Maderios -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/52f60c34.1060...@gmail.com
Re: exit Libre Office 3 pour Libre Office 4.1.4 sur squeeze
Le vendredi 07 février 2014 à 23:37 +0100, Samy Mezani a écrit : Salut, le 07/02/2014 18:48, nono a écrit: Salut J'ai installé Libre Office 4.1.4 sur squeeze en récupérant le soft ici : http://fr.libreoffice.org/telecharger/ Et pourquoi rester en squeeze alors que la stable actuelle dispose de LO 4.1.4 dans ses backports ? http://packages.debian.org/wheezy-backports/libreoffice Samy Non je suis en Wheezy. Oulala je n'étais pas réveillé ce matin. (désolé) Donc par défaut sur la wheezy c'est LO en version 3. J'aurai peut-être dû passer par les backports pour installer la version 4. Mais mon problème reste le même. Comment virer la V3 sans que l'on me demande de retirer Gnome ? nono signature.asc Description: This is a digitally signed message part
Re: exit Libre Office 3 pour Libre Office 4.1.4 sur squeeze
Le samedi 8 février 2014 12:22:07 nono a écrit : […] Mais mon problème reste le même. Comment virer la V3 sans que l'on me demande de retirer Gnome ? Tu as déjà reçu plusieurs solutions. 1. La solution de François Boisson : — cherche quel paquet dépend du paquet libreoffice (au hasard : task-gnome-desktop, merci 'apt-cache rdepends') ; — regarde de quoi dépend ce paquet (ou que ce paquet recommande) ; — marque tous ces paquets comme installés manuellement ('m' dans la NUI d’aptitude, ou 'aptitude unmarkauto', ou 'apt-get install') ; — enlève libreoffice. b. Autre solution (sous-entendue par Charles Plessy) : utiliser equivs pour créer un paquet qui fournisse libreoffice sans rien installer. iii. Encore une autre solution (Samy) : utiliser les paquets de backports qui ont des chances de correctement fournir libreoffice et ainsi remplir de joie le paquet task-gnome- desktop. δ. Et une dernière solution : enlever l’option d’installation des recommandations comme si c’était des dépendances, c’est ce qui force la désinstallation de task-gnome-desktop et donc de Gnome. -- Sylvain Sauvage -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/3361236.Q8O5dQBLx9@earendil
Re: exit Libre Office 3 pour Libre Office 4.1.4 sur squeeze
Le samedi 8 février 2014 12:22:07 nono a écrit : […] Mais mon problème reste le même. Comment virer la V3 sans que l'on me demande de retirer Gnome ? Pour wheezy , c'est simple: Tu ajoutes le dépôt debian backport qui te permettra d'installer Libreofice-4.1.4 en .deb deb http://ftp.debian.org/debian/ wheezy-backports main contrib non-free Tu fais une mise à jour, puis tu forces (1) Synaptic à installer la version backport de Libreoffice et ça roule. (1) synaptic menu - package - force version - 4.1.4 -- Maderios -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/52f62c4f.6020...@gmail.com
[HS] Avez-vous un Thinkpad à vendre ?
Bonjoir ! Je cherche à nouveau un Thinkpad, pour une amie. Budget à 250-300 EURO environ ! Quelqu'un-e a-t-ille ça ? Merci ! Gaël -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/CAGKqBrmvi=RwFyEzN9QEK+FxtaEimw=9y5vvdg7zkedv5op...@mail.gmail.com
Re: [HS] Avez-vous un Thinkpad à vendre ?
Le samedi 8 février 2014, 19:07:34 Gaël a écrit : Bonjoir ! Je cherche à nouveau un Thinkpad, pour une amie. Budget à 250-300 EURO environ ! Quelqu'un-e a-t-ille ça ? Merci ! Gaël http://www.ordinateur-occasion.com/pc-portable-d-occasion/gamme-performance-102-1.html
Re: exit Libre Office 3 pour Libre Office 4.1.4 sur squeeze
On Saturday 08 February 2014 14:08:31 maderios wrote: Le samedi 8 février 2014 12:22:07 nono a écrit : […] Mais mon problème reste le même. Comment virer la V3 sans que l'on me demande de retirer Gnome ? Pour wheezy , c'est simple: Tu ajoutes le dépôt debian backport qui te permettra d'installer Libreofice-4.1.4 en .deb deb http://ftp.debian.org/debian/ wheezy-backports main contrib non-free Tu fais une mise à jour, puis tu forces (1) Synaptic à installer la version backport de Libreoffice et ça roule. (1) synaptic menu - package - force version - 4.1.4 Sous Wheezy, j'ai rajouté dans sources.list : deb http://ftp.debian.org/debian/ wheezy-backports main contrib non-free, # apt-get update Lancé synaptic et aucun Libreoffice 4.1.4 n'apparait, même en tapant backport. Seuls les paquets libreoffice 3.5.4 sont affichés. André -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201402081947.36477.andre_deb...@numericable.fr
Systemd on Debian
Bonsoir, Suite aux messages parlant du débat concernant le futur système d'init utilisé par Debian. J'ai décidé d'expérimenter systemd. Je ne sais pas si ce sera le choix des DD. Il demande de profonds changements dans les scripts, il brise la compatibilité avec Unix et son auteur est quelqu'un de contre versé. Il y a quelques années, j'ai assisté à une superbe conférence sur systemd. Déjà à l'époque, j'avais trouvé les principes très intéressants. J'ai installé une Debian testing minimaliste, serveur SSH et outils standards. Installation de 2 paquets : Systemd et systemd-sysv Mise en hold de systemd-sysv et update-grub. Le boot et le shutdown est extrêmement rapide. Je suis bluffé. Maintenant, je sais que ce test n'est pas exhautif et je devrai tester plus en avant de me faire une idée définitive. Quelqu'un d'autre a-t-il fait des essais similaires ? Bien à vous. -- Thierry Leurent -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/1f93242f7b59529ae5616fd986e0240e.squir...@ssl0.ovh.net
[testing] migration 32 vers 64 bits
Bonjour, Maintenant que debian est multiarch est-il possible et simple de migrer une installation 32 bits existante en 64 bits ? Gaëtan -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20140208232011.12ebe72a9949d9a33c3b3...@neuf.fr
Re: [HS] Avez-vous un Thinkpad à vendre ?
Le samedi 8 février 2014, 19:07:34 Gaël a écrit : Bonjoir ! Je cherche à nouveau un Thinkpad, pour une amie. Budget à 250-300 EURO environ ! Quelqu'un-e a-t-il ça ? Merci ! Gaël Le 8 février 2014 19:25, laurent Trinques scor...@qelectrotech.org a écrit : http://www.ordinateur-occasion.com/pc-portable-d-occasion/gamme-performance-102-1.html Bonjour, cet article de l'Aful https://aful.org/metamorphose/se-proteger-informatique-ere-post-snowden mène à ceci, un Thinkpad libéré à ~218£ : http://www.fsf.org/resources/hw/endorsement/gluglug Bon dimanche. SL -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/cafpklmkdwa2yt7gk7aznmmdjp93d6vfhqqs4gvv8pz5hpyc...@mail.gmail.com
11 Sesja Linuxowa-2014.
Witam. Duzo obecnie jest jednoczesnie przygotowywanych spotkan w pierwszej polowie tego roku. Tym razem opowiem o 11 Sesji Linuxowej-2014 we Wroclawiu. Witryna pod nowym linkiem http://11.sesja.linuksowa.pl Termin. 5 i 6 kwietnia t.j. sobota i niedziela. Miejsce. Politechnika Wroclawska ul. Wybrzeże Wyspiańskiego 27. Trwa przyjmowanie zgloszen przezentacji. Ostateczny termin przyjmowania zgłoszeń to 23 marzec 2014. Zgłoszenia prosimy wysyłać na adres: prelek...@sesja.linuksowa.pl Wiecej o Call for papers pod http://11.sesja.linuksowa.pl/cfp Propozycja noclegu dla przyjezdnych. Poniewaz tego roku pobliski Hotel Asystencki niestety idzie do remontu proponuje The One Hostel. Jego witryna pod http://www.theonehostel.pl Najtaniej w nim tuba noclegowa po 45 zl/doba, lub pokoj 2-osobowy 2 x 65 = 130 zl. Adres. The One Hostel Rynek 30. 50-102 Wrocław. Do Politechniki dojazd tramwajem. Open Source jest dziś największym i najważniejszym nurtem w sektorze IT - albo dasz się ponieść na fali, albo utoniesz próbując płynąć pod prąd... -- Konczac Pozdrawiam. Krzysztof. Registered Linux User: 253243 Powered by Aurox 11.0, Ubuntu Studio 8.04 i Fedora 9.0 Krzysztof Zubik. | kzu...@netglob.com.pl | krzysztof.zu...@gmail.com http://www.kzubik.cba.pl http://wpolsce.it -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/52f6a524.5060...@netglob.com.pl
Mi Inicio en Debian
Hola, espero que este haciendo todo bien.. Quiero aprender sobre Linux Debian. -Instale el SO(Sist.Oper.) -Configure mi cuenta de email dentro de Debian Ahora como empiezo a conocerlo? -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391862335.4631.5.ca...@debian.cab
Re: Mi Inicio en Debian
El día 8 de febrero de 2014, 13:25, Carlos cab.s...@gmail.com escribió: Hola, espero que este haciendo todo bien.. Quiero aprender sobre Linux Debian. -Instale el SO(Sist.Oper.) -Configure mi cuenta de email dentro de Debian Ahora como empiezo a conocerlo? Welcome to the jungle www.debian.org ;) -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391862335.4631.5.ca...@debian.cab -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAJs4OpuFRKE1ite-5p37cKW=hbtehg_+h-3yrw03l7qp7aa...@mail.gmail.com
Re: [OT] Permisos de usuarios en MySQL.
El Fri, 07 Feb 2014 20:19:39 +0100, Ramses escribió: El 07/02/2014, a las 19:58, Camaleón noela...@gmail.com escribió: (...) Hum... dos apuntes: 1/ Tengo mis dudas en la sintaxis que usas para seleccionar la base de datos (`encuesta`.*), comprueba que sea la correcta. Estoy leyendo el manual pero no me queda claro el uso de esas comillas simples invertidas ni si la base de datos se llama así, exactamente. (supongo que la sintaxis estará bien porque si no te daría un error al ejecutar el comando pero el nombre de la base de datos sobre la que quieres aplicar los privilegios sí tiene que coincidir) Camaleón, esas son las salidas del comando show grants; habiendo entrado en mysql con cada usuario. Realmente la base de datos es encuesta_db, sólo que al pegar los datos aquí, se ha perdido el _db. Vale, era sólo para confirmar. 2/ No has especificado contraseña para el usuario pepe (no hay IDENTIFIED BY PASSWORD) ¿es correcto? Eso es lo que aparece al entrar en MySQL con el usuario pepe, con su contraseña, y ejecutar el comando show grants;. Entiendo pero ¿debe estar así? :-? (...) El comando que quieres ejecutar necesita de permisos concretos, según parece. Ahora, si estoy en lo cierto del permiso FILE, parece que lo más viable, en cuanto a seguridad se refiere, es ejecutar ese comando con el usuario root. ¿Estoy en lo cierto?. Según entiendo, FILE es un privilegio que tendrías que activar/ habilitar sobre tu usuario para que pueda realizar la acción que pides. No es un comando. http://dev.mysql.com/doc/refman/5.1/en/privileges- provided.html#priv_file No he dicho que sea un comando, digo que es un permiso. A lo que me refería con lo de ejecutar el comando con el usuario root, es a ejecutar el mysql -u root --pass.. No entiendo lo que dices de ejecutar el comando pero bueno, que lo que sugiere el manual de MySQL es que es necesario activar el privilegio FILE sobre el usuario para que pueda ejecutar el volcado de datos. No todos los servicios de hospedaje permiten esta opción precisamente por motivos de seguridad (p. ej., en los servidores que tengo bajo Solaris está desactivado pero en linux suelen habilitarlo para facilitar la gestión de las bdd a los usuarios a través de phpMyAdmin). Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2014.02.08.14.29...@gmail.com
Re: Mi Inicio en Debian
On Sat, 08 Feb 2014 09:25:35 -0300, Carlos wrote: (has secuestrado un hilo, abro uno nuevo...) Hola, espero que este haciendo todo bien.. Quiero aprender sobre Linux Debian. -Instale el SO(Sist.Oper.) -Configure mi cuenta de email dentro de Debian Ahora como empiezo a conocerlo? ¿Usándolo? :-) Tienes manuales excelentes disponibles en: http://www.debian.org/doc/user-manuals Encuentro particularmente útil el Manual de referencia. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2014.02.08.14.33...@gmail.com
Re: ssh dudas
El Fri, 07 Feb 2014 19:26:54 -0430, Edward Villarroel (EDD) escribió: buenas noche lista disculpen mi ignorancia saben si me conecto como root aun servidor de linux ejecuto una tarea q tarda como 30 min puedo revisar como va desde otro terminal y ver lo mismo q esta viendo mi primera sesion abierta?? tengo un servidor A un terminal B Desde Un terminal C puedo ver lo que esta haciendo B O pasar la sesion de B a C porque B debe reiniciar y no puedo dejar de ver el avance de mi respaldo Estaba pensando que además de la multiplexación y dependiendo de la herramienta que uses para hacer la copia de seguridad (p. ej., tar) si ésta lo permite podrías decirle a la aplicación que envíe la salida del progreso de la copia a un archivo de texto al que puedas acceder desde cualquier otro equipo iniciando una segunda sesión. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2014.02.08.15.01...@gmail.com
Re: ssh dudas
camaleon no c muy bien que aplicacion es pero ella va imprimiendo el progreso en la pantalla! hay alguna forma de decirle al terminal q me imprima la salida del progreso en un archivo de texto plano? Edward Villarroel: @Agentedd El día 8 de febrero de 2014, 10:31, Camaleón noela...@gmail.com escribió: El Fri, 07 Feb 2014 19:26:54 -0430, Edward Villarroel (EDD) escribió: buenas noche lista disculpen mi ignorancia saben si me conecto como root aun servidor de linux ejecuto una tarea q tarda como 30 min puedo revisar como va desde otro terminal y ver lo mismo q esta viendo mi primera sesion abierta?? tengo un servidor A un terminal B Desde Un terminal C puedo ver lo que esta haciendo B O pasar la sesion de B a C porque B debe reiniciar y no puedo dejar de ver el avance de mi respaldo Estaba pensando que además de la multiplexación y dependiendo de la herramienta que uses para hacer la copia de seguridad (p. ej., tar) si ésta lo permite podrías decirle a la aplicación que envíe la salida del progreso de la copia a un archivo de texto al que puedas acceder desde cualquier otro equipo iniciando una segunda sesión. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2014.02.08.15.01...@gmail.com -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CADfsJo0ovAzBs00b=tls3wowk8xbk-isxzvovdpvayaxho7...@mail.gmail.com
Re: ssh dudas
El Sat, 08 Feb 2014 12:26:21 -0430, Edward Villarroel (EDD) escribió: El día 8 de febrero de 2014, 10:31, Camaleón noela...@gmail.com escribió: (...) tengo un servidor A un terminal B Desde Un terminal C puedo ver lo que esta haciendo B O pasar la sesion de B a C porque B debe reiniciar y no puedo dejar de ver el avance de mi respaldo Estaba pensando que además de la multiplexación y dependiendo de la herramienta que uses para hacer la copia de seguridad (p. ej., tar) si ésta lo permite podrías decirle a la aplicación que envíe la salida del progreso de la copia a un archivo de texto al que puedas acceder desde cualquier otro equipo iniciando una segunda sesión. camaleon no c muy bien que aplicacion es pero ella va imprimiendo el progreso en la pantalla! hay alguna forma de decirle al terminal q me imprima la salida del progreso en un archivo de texto plano? Sin saber de qué aplicación se trata (!) , obviamente no te puedo responder a eso ;-) Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2014.02.08.17.03...@gmail.com
Re: Mi Inicio en Debian
El sáb, 08-02-2014 a las 14:33 +, Camaleón escribió: On Sat, 08 Feb 2014 09:25:35 -0300, Carlos wrote: (has secuestrado un hilo, abro uno nuevo...) Hola, espero que este haciendo todo bien.. Quiero aprender sobre Linux Debian. -Instale el SO(Sist.Oper.) -Configure mi cuenta de email dentro de Debian Ahora como empiezo a conocerlo? ¿Usándolo? :-) Tienes manuales excelentes disponibles en: http://www.debian.org/doc/user-manuals Encuentro particularmente útil el Manual de referencia. Saludos, -- Camaleón - Camaleon, tengo el Navegador Iceweasel No tengo funcionando el Flash, es por eso que no puedo ver ningun Video de YouTube? se queda como cargando el video y nunca carga. No conosco los comandos de la Terminal se como funciona ;) pero no se los comandos, tenme paciencia y ayudame por favor. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391883019.7079.9.ca...@debian.cab
Problemas con YouTube/FlashPlayer (era: Mi Inicio en Debian)
El Sat, 08 Feb 2014 15:10:19 -0300, Carlos escribió: El sáb, 08-02-2014 a las 14:33 +, Camaleón escribió: On Sat, 08 Feb 2014 09:25:35 -0300, Carlos wrote: (has secuestrado un hilo, abro uno nuevo...) Y vuelves a secuestrarlo, esta vez tu propio hilo. Carlos, esto es una lista de correo, no un foro. En las listas de correos los mensajes se agrupan por hilos donde se habla de un asunto concreto. Cuando tengas un problema nuevo del que hablar en lugar de RESPONDER a un mensaje ENVÍA un correo nuevo a la lista. Camaleon, tengo el Navegador Iceweasel No tengo funcionando el Flash, es por eso que no puedo ver ningun Video de YouTube? se queda como cargando el video y nunca carga. Será por eso. YouTube necesita Flash Player. No conosco los comandos de la Terminal se como funciona ;) pero no se los comandos, tenme paciencia y ayudame por favor. ¿Y para qué ibas a necesitar una terminal? :-? Puedes ir a la página de Adobe¹ y descarga flashplayer (archivo .tar.gz para tu sistema de 32 o 64 bits, ojo con eso), lo descomprimes en el escritorio y copias únicamente el archivo libflashplayer.so dentro de la carpeta plugins de tu perfil de Iceweasel. Comprueba que te funciona desde este enlace² y/o entrando en YouTube. ¹http://get.adobe.com/es/flashplayer ²http://www.adobe.com/software/flash/about Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2014.02.08.18.22...@gmail.com
Re: Problemas con YouTube/FlashPlayer (era: Mi Inicio en Debian)
O instalar flash plugin non free en sinaptyc. Desde mi ONE TOUCH M'POP Camaleón noela...@gmail.com escribió: El Sat, 08 Feb 2014 15:10:19 -0300, Carlos escribió: El sáb, 08-02-2014 a las 14:33 +, Camaleón escribió: On Sat, 08 Feb 2014 09:25:35 -0300, Carlos wrote: (has secuestrado un hilo, abro uno nuevo...) Y vuelves a secuestrarlo, esta vez tu propio hilo. Carlos, esto es una lista de correo, no un foro. En las listas de correos los mensajes se agrupan por hilos donde se habla de un asunto concreto. Cuando tengas un problema nuevo del que hablar en lugar de RESPONDER a un mensaje ENVÍA un correo nuevo a la lista. Camaleon, tengo el Navegador Iceweasel No tengo funcionando el Flash, es por eso que no puedo ver ningun Video de YouTube? se queda como cargando el video y nunca carga. Será por eso. YouTube necesita Flash Player. No conosco los comandos de la Terminal se como funciona ;) pero no se los comandos, tenme paciencia y ayudame por favor. ¿Y para qué ibas a necesitar una terminal? :-? Puedes ir a la página de Adobe¹ y descarga flashplayer (archivo .tar.gz para tu sistema de 32 o 64 bits, ojo con eso), lo descomprimes en el escritorio y copias únicamente el archivo libflashplayer.so dentro de la carpeta plugins de tu perfil de Iceweasel. Comprueba que te funciona desde este enlace² y/o entrando en YouTube. ¹http://get.adobe.com/es/flashplayer ²http://www.adobe.com/software/flash/about Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2014.02.08.18.22...@gmail.com
Primeros tropiezos... :)
Espero que me tengas paciencia y me ayudes Camaleon.. ASI TENGO QUE ENVIAS LOS MENSAJES? Descargue el archivo: install_flash_player_11_linux.i386.tar.gz Lo descomprimí supuestamente en mi escritorio pero no lo veo. De todos modos en las opciones, entre a: HerramientaComplementos Se abrio una solapa Administrador de complementos Y a la Izquierda figura Plugins Esta es la carpeta que decias? -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391885546.7079.20.ca...@debian.cab
Como hacer cambios en mi escritorio?
Poner accesos directos, cambiar el wallpaper, gadgets, etc -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391887768.7079.23.ca...@debian.cab
Re: Como hacer cambios en mi escritorio?
El Dissabte, 8 Febrer de 2014, a les 16:29:28, Carlos va escriure: Poner accesos directos, cambiar el wallpaper, gadgets, etc Que escritorio? KDE, Gnome... Toni -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1720239.etLcMX3Oh2@alba
Re: [OT] Permisos de usuarios en MySQL. (SOLUCIONADO)
El 08/02/2014, a las 15:28, Camaleón noela...@gmail.com escribió: El Fri, 07 Feb 2014 20:19:39 +0100, Ramses escribió: El 07/02/2014, a las 19:58, Camaleón noela...@gmail.com escribió: (...) Hum... dos apuntes: 1/ Tengo mis dudas en la sintaxis que usas para seleccionar la base de datos (`encuesta`.*), comprueba que sea la correcta. Estoy leyendo el manual pero no me queda claro el uso de esas comillas simples invertidas ni si la base de datos se llama así, exactamente. (supongo que la sintaxis estará bien porque si no te daría un error al ejecutar el comando pero el nombre de la base de datos sobre la que quieres aplicar los privilegios sí tiene que coincidir) Camaleón, esas son las salidas del comando show grants; habiendo entrado en mysql con cada usuario. Realmente la base de datos es encuesta_db, sólo que al pegar los datos aquí, se ha perdido el _db. Vale, era sólo para confirmar. 2/ No has especificado contraseña para el usuario pepe (no hay IDENTIFIED BY PASSWORD) ¿es correcto? Eso es lo que aparece al entrar en MySQL con el usuario pepe, con su contraseña, y ejecutar el comando show grants;. Entiendo pero ¿debe estar así? :-? (...) El comando que quieres ejecutar necesita de permisos concretos, según parece. Ahora, si estoy en lo cierto del permiso FILE, parece que lo más viable, en cuanto a seguridad se refiere, es ejecutar ese comando con el usuario root. ¿Estoy en lo cierto?. Según entiendo, FILE es un privilegio que tendrías que activar/ habilitar sobre tu usuario para que pueda realizar la acción que pides. No es un comando. http://dev.mysql.com/doc/refman/5.1/en/privileges- provided.html#priv_file No he dicho que sea un comando, digo que es un permiso. A lo que me refería con lo de ejecutar el comando con el usuario root, es a ejecutar el mysql -u root --pass.. No entiendo lo que dices de ejecutar el comando pero bueno, que lo que sugiere el manual de MySQL es que es necesario activar el privilegio FILE sobre el usuario para que pueda ejecutar el volcado de datos. No todos los servicios de hospedaje permiten esta opción precisamente por motivos de seguridad (p. ej., en los servidores que tengo bajo Solaris está desactivado pero en linux suelen habilitarlo para facilitar la gestión de las bdd a los usuarios a través de phpMyAdmin). Bien, pues como yo también he leído por ahí que no es recomendable darle permiso / privilegio FILE en MySQL a otro usuario que no sea root, por temas de seguridad, ejecutaré la exportación con el usuario root. Lo que está claro es que el usuario pepe no podía realizar la exportación a fichero .csv, porque no tenía el permiso / privilegio FILE. Saludos y gracias a todos, Ramses -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/5abdae01-71a3-445a-9dda-662889d77...@gmail.com
Re: Primeros tropiezos... :)
El día 8 de febrero de 2014, 12:52, Carlos cab.s...@gmail.com escribió: Espero que me tengas paciencia y me ayudes Camaleon.. ASI TENGO QUE ENVIAS LOS MENSAJES? Descargue el archivo: install_flash_player_11_linux.i386.tar.gz Debes saber bien donde los descomprimes o será dificil ayudarte. Supongo lo descargaste en downloads o en Descargas, ¿es así?, depende del idioma de tu escritorio. Ahora, al descomprimir, si quieres descomprimilo ahí mismo, el punto es que ubiques bien dode lo descomprimes. Lo descomprimí supuestamente en mi escritorio pero no lo veo. De todos modos en las opciones, entre a: HerramientaComplementos Se abrio una solapa Administrador de complementos Y a la Izquierda figura Plugins Esta es la carpeta que decias? No se puede tratar de ésta sección, el copiado del archivo lo debes hacer desde nautilus o dolphin, no sé cual tengas instalado. ¿Ubicas tu carpeta de usuario, o tu carpeta personal? Hago la pregunta porque si vienes de windows, pues es algo distinto la estructura de tus carpetas personales. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391885546.7079.20.ca...@debian.cab Saludos. Ricardo C. N. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/caobz3siscc_dc_1pm+pc+saf2ta1jz1pgjfbarao-zrzvuh...@mail.gmail.com
Re: Primeros tropiezos... :)
El Sat, 08 Feb 2014 15:52:26 -0300, Carlos escribió: Espero que me tengas paciencia y me ayudes Camaleon.. ASI TENGO QUE ENVIAS LOS MENSAJES? Pues NO. Primero, el asunto Primeros tropiezos no indica el problema que tienes (salvo que vayas caminando por la calle y hayas tropezado con algún pedrusco...), por lo que cuanto más preciso sea el asunto más gente de la lista podrá saber lo que te sucede, se interesará por tu mensaje, lo leerá y te ayudará. Si no sabe de qué va el tema, pasará al siguiente correo. Segundo, tenías que haber respondido al mensaje que he enviado yo, no crear un hilo nuevo (no ahora, eso tenías que haberlo hecho antes). Qué lío, ¿eh? :-) Descargue el archivo: install_flash_player_11_linux.i386.tar.gz Pues mal hecho. Ese archivo no es que tienes que descargar, es una versión antigua ¿de dónde lo has bajado? Te mandé una página ¿has ido ahí? Lo descomprimí supuestamente en mi escritorio pero no lo veo. Mejor porque esa versión no me convence. De todos modos en las opciones, entre a: HerramientaComplementos Se abrio una solapa Administrador de complementos Y a la Izquierda figura Plugins Esta es la carpeta que decias? No, sigue los pasos que te indiqué en el correo anterior y pon exactamente lo que haces, no dejes que nos inventemos las cosas que por aquí tenemos mucha imaginación :-) Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2014.02.08.20.07...@gmail.com
Re: Como hacer cambios en mi escritorio?
El Sat, 08 Feb 2014 16:29:28 -0300, Carlos escribió: ¡Bieeen! Este correo lo has mandado estupendamente :-D Poner accesos directos, cambiar el wallpaper, gadgets, etc Pues como en cualquier escritorio: botón derecho y propiedades/ configuración, crear lanzador... tienes varias opciones. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2014.02.08.20.09...@gmail.com
Crontab no ejecuta tarea a la hora programada.
Hola a todos, Me he encontrado una cosa algo extraña... Tengo un contenedor OpenVZ sobre un Server PROXMOX. En dicho contenedor configuro una tarea en crontab para que se ejecute, por ejemplo, a las 22:00, pero la tarea no se ejecuta a esa hora, sino que lo hace una hora más tarde, a las 23:00. He mirado la hora, tanto en el Contenedor como en el Server PROXMOX, con el comando date, y en ambos casos es correcta. ¿De dónde está sacando la hora de ejecución crontab? Saludos y gracias, Ramses -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4beaf999-c8f4-4459-b285-ce2fe0a05...@gmail.com
Re: Primeros tropiezos... :)
El Sat, 08 Feb 2014 20:07:17 +, Camaleón escribió: El Sat, 08 Feb 2014 15:52:26 -0300, Carlos escribió: (...) Descargue el archivo: install_flash_player_11_linux.i386.tar.gz Pues mal hecho. Ese archivo no es que tienes que descargar, es una versión antigua ¿de dónde lo has bajado? Te mandé una página ¿has ido ahí? Hummm, espera que tienes razón, es la correcta (no sé por qué pensaba que iba ya por la 12). Lo descomprimí supuestamente en mi escritorio pero no lo veo. Mejor porque esa versión no me convence. Ahora sí me convence :-) Pero si no lo encuentras el archivo mal andamos. Mira a ver si lo tienes dentro de /home/tu_usuario/Descargas. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2014.02.08.20.17...@gmail.com
Re: Crontab no ejecuta tarea a la hora programada.
El Sat, 08 Feb 2014 21:11:55 +0100, Ramses escribió: Me he encontrado una cosa algo extraña... Tengo un contenedor OpenVZ sobre un Server PROXMOX. En dicho contenedor configuro una tarea en crontab para que se ejecute, por ejemplo, a las 22:00, pero la tarea no se ejecuta a esa hora, sino que lo hace una hora más tarde, a las 23:00. He mirado la hora, tanto en el Contenedor como en el Server PROXMOX, con el comando date, y en ambos casos es correcta. Bueno, eso sí que es raro. ¿La hora del registro de ejecución de la tarea es correcta? ¿Has comprobado la zona horaria, que sea la adecuada? ¿De dónde está sacando la hora de ejecución crontab? Pues te diría que del anfitrión/nodo, o al menos la mayoría de soluciones de virtualización usan su propio sistema de sincronización con la máquina que hace de host pero no está de más añadir tu propia solución en el contenedor que pasa por usar ntpd o algún paquete ligero que mantenga la hora de la VM ajustada. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2014.02.08.20.31...@gmail.com
Re: Como hacer cambios en mi escritorio?
El sáb, 08-02-2014 a las 20:32 +0100, Antoni Bella Pérez escribió: El Dissabte, 8 Febrer de 2014, a les 16:29:28, Carlos va escriure: Poner accesos directos, cambiar el wallpaper, gadgets, etc Que escritorio? KDE, Gnome... Toni No se si es KDE o Gnome.. a la izquierda arriba entre a Configuracion del sistema-Fondo Y cambie el Papel Tapiz. Como puedo ver que Escritorio tengo? -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391895563.4398.1.ca...@debian.cab
Re: Como hacer cambios en mi escritorio?
El sáb, 08-02-2014 a las 20:09 +, Camaleón escribió: El Sat, 08 Feb 2014 16:29:28 -0300, Carlos escribió: ¡Bieeen! Este correo lo has mandado estupendamente :-D Poner accesos directos, cambiar el wallpaper, gadgets, etc Pues como en cualquier escritorio: botón derecho y propiedades/ configuración, crear lanzador... tienes varias opciones. Saludos, -- Camaleón _ Yo quise usar el boton derecho pero no muestra nada -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391895673.4398.3.ca...@debian.cab
Re: Primeros tropiezos... :)
El sáb, 08-02-2014 a las 13:39 -0600, Ricardo C. N. escribió: El día 8 de febrero de 2014, 12:52, Carlos cab.s...@gmail.com escribió: Espero que me tengas paciencia y me ayudes Camaleon.. ASI TENGO QUE ENVIAS LOS MENSAJES? Descargue el archivo: install_flash_player_11_linux.i386.tar.gz Debes saber bien donde los descomprimes o será dificil ayudarte. Supongo lo descargaste en downloads o en Descargas, ¿es así?, depende del idioma de tu escritorio. Ahora, al descomprimir, si quieres descomprimilo ahí mismo, el punto es que ubiques bien dode lo descomprimes. Lo descomprimí supuestamente en mi escritorio pero no lo veo. De todos modos en las opciones, entre a: HerramientaComplementos Se abrio una solapa Administrador de complementos Y a la Izquierda figura Plugins Esta es la carpeta que decias? No se puede tratar de ésta sección, el copiado del archivo lo debes hacer desde nautilus o dolphin, no sé cual tengas instalado. ¿Ubicas tu carpeta de usuario, o tu carpeta personal? Hago la pregunta porque si vienes de windows, pues es algo distinto la estructura de tus carpetas personales. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391885546.7079.20.ca...@debian.cab Saludos. Ricardo C. N. ___ Tengo el idioma en Español. Si, tengo los 3 archivos localizados, ya descomprimidos en una carpeta Escritorio ;) es que yo lo buscaba en mi escritorio y no se ve. Ahora debo copiar ese archivo install_flash_p...tar.gz y pegarlo donde? -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391896678.4398.17.ca...@debian.cab
Re: Primeros tropiezos... :)
On Sat, 08 Feb 2014 18:57:58 -0300 Carlos cab.s...@gmail.com wrote: _ Tengo el idioma en Español. Si, tengo los 3 archivos localizados, ya descomprimidos en una carpeta Escritorio ;) es que yo lo buscaba en mi escritorio y no se ve. Ahora debo copiar ese archivo install_flash_p...tar.gz y pegarlo donde? Debes copiar libflashplayer.so en /usr/lib/mozilla/plugins/ quedando así el resultado final /usr/lib/mozilla/plugins/libflashplayer.so si lees el manual dice exactamente todo esto. Saludos -- Servicios:. http://mamalibre.com.ar/servicios.php MamaLibre, Casa en Lincoln, Ituzaingo 1085 CP6070, Buenos Aires, Argentina pgpxVyBNvdKXg.pgp Description: PGP signature
Re: Primeros tropiezos... :)
El 08/02/14 23:12, Fabián Bonetti escribió: Debes copiar libflashplayer.so en /usr/lib/mozilla/plugins/ quedando así el resultado final /usr/lib/mozilla/plugins/libflashplayer.so si lees el manual dice exactamente todo esto. No importa donde lo coloques. Puedes hacerlo en tu usuario con el de Mozilla o Iceweasel dejándolo en: /home/tuusuario/.mozilla/plugins Sin más. Si eres único en la máquina, pero si tienes más usuarios en entornos gráficos, entonces mejor es esa la que comentas, pero si es la única persona que lo usa no lo veo sentido ponerlo en /usr/lib/mozilla/plugins a no ser que tengas más usuarios necesarios. -- Saludos de Santiago José López Borrazás. signature.asc Description: OpenPGP digital signature
Re: Primeros tropiezos... :)
El sáb, 08-02-2014 a las 19:12 -0300, Fabián Bonetti escribió: On Sat, 08 Feb 2014 18:57:58 -0300 Carlos cab.s...@gmail.com wrote: _ Tengo el idioma en Español. Si, tengo los 3 archivos localizados, ya descomprimidos en una carpeta Escritorio ;) es que yo lo buscaba en mi escritorio y no se ve. Ahora debo copiar ese archivo install_flash_p...tar.gz y pegarlo donde? Debes copiar libflashplayer.so en /usr/lib/mozilla/plugins/ quedando así el resultado final /usr/lib/mozilla/plugins/libflashplayer.so si lees el manual dice exactamente todo esto. Saludos _ Tengo localizada la carpeta Escritorio donde esta descomprimido el archivo. Y la carpeta plugins /usr/lib/mozilla/plugins/ dentro de esta carpeta tengo: 2 archivos *.so - libgnome-shell-browser-plugin.so - librhythmbox-itms-detection-plugin.so 1 archivo *.so pero con la flechita que tienen los accesos directos - flash-mozilla.so El archivo lo puedo copiar en la carpeta Escritorio pero no me deja pegarlo en la carpeta plugins /usr/lib/mozilla/plugins/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391898583.4398.23.ca...@debian.cab
Re: Primeros tropiezos... :)
El 08/02/14 21:16, Camaleón escribió: El Sat, 08 Feb 2014 20:07:17 +, Camaleón escribió: (...) Descargue el archivo: install_flash_player_11_linux.i386.tar.gz Pues mal hecho. Ese archivo no es que tienes que descargar, es una versión antigua ¿de dónde lo has bajado? Te mandé una página ¿has ido ahí? Hummm, espera que tienes razón, es la correcta (no sé por qué pensaba que iba ya por la 12). Lo pensabas porque tienes razón ;) Va por la 12, pero en Linux es sólo para Chrome. Para el resto de navegadores, según la Web de FlashPlayer, dice esto: Mozilla, Firefox, SeaMonkey (Flash Player 11.2 is the last supported Flash Player version for Linux. Adobe will continue to provide security updates.) Y la última versión para estos, es la 11.2.202.336 http://www.adobe.com/software/flash/about/ -- www.LinuxCounter.net Registered user #558467 has 1 linux machines Registered Linux machine #2003003 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/ld6bt9$tqd$1...@ger.gmane.org
Re: Primeros tropiezos... :)
On Sat, 08 Feb 2014 19:29:43 -0300 Carlos cab.s...@gmail.com wrote: _ Tengo localizada la carpeta Escritorio donde esta descomprimido el archivo. Y la carpeta plugins /usr/lib/mozilla/plugins/ dentro de esta carpeta tengo: 2 archivos *.so - libgnome-shell-browser-plugin.so - librhythmbox-itms-detection-plugin.so 1 archivo *.so pero con la flechita que tienen los accesos directos - flash-mozilla.so solo necesitas libflashplayer.so ni mas ni menos, lo demás es irrelevante. El archivo lo puedo copiar en la carpeta Escritorio pero no me deja pegarlo en la carpeta plugins /usr/lib/mozilla/plugins/ Es que tu usuario no tiene privilegios intenta entrar al usuario con mas privilegios root usa una terminal y as $su root [enter] te darás cuenta que estas en root por # o poniendo el comando whoami [enter] Si te complicas as como dice Santiago José López Borrazás No importa donde lo coloques. Puedes hacerlo en tu usuario con el de Mozilla o Iceweasel dejándolo en: /home/tuusuario/.mozilla/plugins -- Servicios:. http://mamalibre.com.ar/servicios.php MamaLibre, Casa en Lincoln, Ituzaingo 1085 CP6070, Buenos Aires, Argentina pgpMsqsa5BFn1.pgp Description: PGP signature
Re: Primeros tropiezos... :)
El día 8 de febrero de 2014, 16:29, Carlos cab.s...@gmail.com escribió: Tengo localizada la carpeta Escritorio donde esta descomprimido el archivo. Y la carpeta plugins /usr/lib/mozilla/plugins/ dentro de esta carpeta tengo: 2 archivos *.so - libgnome-shell-browser-plugin.so - librhythmbox-itms-detection-plugin.so 1 archivo *.so pero con la flechita que tienen los accesos directos - flash-mozilla.so El archivo lo puedo copiar en la carpeta Escritorio pero no me deja pegarlo en la carpeta plugins /usr/lib/mozilla/plugins/ No te deja pegarlo en /usr/lib/mozilla/plugins/ porque para poderla pegar ahí necesitas permisos root: Puedes entrar a terminal y: Te ubicas desde la terminal en la carpeta donde tengas el libgnome-shell-browser-plugin.so Sí tienes activado el sudo (debe ser que sí): $sudo cp libgnome-shell-browser-plugin.so /usr/lib/mozilla/plugins/ si no pues entras con su y aplicas $su #cp libgnome-shell-browser-plugin.so /usr/lib/mozilla/plugins/ Saludos. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAOBz3shArqErZZURckNAHu_oCxSCYm2jPx9T+Xr8dVutw=q...@mail.gmail.com
Re: Primeros tropiezos... :)
El archivo lo puedo copiar en la carpeta Escritorio pero no me deja pegarlo en la carpeta plugins /usr/lib/mozilla/plugins/ Es que tu usuario no tiene privilegios intenta entrar al usuario con mas privilegios root usa una terminal y as $su root [enter] te darás cuenta que estas en root por # o poniendo el comando whoami [enter] Si te complicas as como dice Santiago José López Borrazás No importa donde lo coloques. Puedes hacerlo en tu usuario con el de Mozilla o Iceweasel dejándolo en: /home/tuusuario/.mozilla/plugins Entre a Terminal de Root INGRESE: whoami [enter] DEVOLVIO: root root@DEBIAN:/home/carlosab# ahora que comando uso para copiarlo? En cuanto a: /home/tuusuario/.mozilla/plugins seria: /home/carlosab/.mozilla/plugins PERO No tengo .mozilla -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391900964.4398.28.ca...@debian.cab
Re: Crontab no ejecuta tarea a la hora programada.
El 08/02/2014, a las 21:31, Camaleón noela...@gmail.com escribió: El Sat, 08 Feb 2014 21:11:55 +0100, Ramses escribió: Me he encontrado una cosa algo extraña... Tengo un contenedor OpenVZ sobre un Server PROXMOX. En dicho contenedor configuro una tarea en crontab para que se ejecute, por ejemplo, a las 22:00, pero la tarea no se ejecuta a esa hora, sino que lo hace una hora más tarde, a las 23:00. He mirado la hora, tanto en el Contenedor como en el Server PROXMOX, con el comando date, y en ambos casos es correcta. Bueno, eso sí que es raro. ¿La hora del registro de ejecución de la tarea es correcta? ¿Has comprobado la zona horaria, que sea la adecuada? Programo la tarea a las 23:00, se ejecuta a las 00:00, el el syslog aparece ejecutada a las 00:00, y ambos sistemas, tanto el Host como el OpenVZ tienen la hora correcta, las 00:00. ¿De dónde está sacando la hora de ejecución crontab? Pues te diría que del anfitrión/nodo, o al menos la mayoría de soluciones de virtualización usan su propio sistema de sincronización con la máquina que hace de host pero no está de más añadir tu propia solución en el contenedor que pasa por usar ntpd o algún paquete ligero que mantenga la hora de la VM ajustada. Están en hora, el tema es que lo que programe en el crontab se ejecuta una hora después. ¿A alguien le ha pasado algo parecido?. Saludos y gracias, Ramses -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/a688a33c-1e7f-4c15-bc26-549a6eda4...@gmail.com
Re: Primeros tropiezos... :)
El 09/02/14 00:09, Carlos escribió: En cuanto a: /home/tuusuario/.mozilla/plugins seria: /home/carlosab/.mozilla/plugins PERO No tengo .mozilla Seguro que si lo tienes, lo que ocurre es que en linux, los archivos y directorios que empiezan por punto (.) son ocultos y no se ven por defecto. Prueba ls -a /home/carlosab verás como aparece ;) -- www.LinuxCounter.net Registered user #558467 has 1 linux machines Registered Linux machine #2003003 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/ld6dtd$m1d$1...@ger.gmane.org
Re: Primeros tropiezos... :)
On Sat, 08 Feb 2014 20:09:24 -0300 Carlos cab.s...@gmail.com wrote: Entre a Terminal de Root INGRESE: whoami [enter] DEVOLVIO: root root@DEBIAN:/home/carlosab# ahora que comando uso para copiarlo? En cuanto a: /home/tuusuario/.mozilla/plugins seria: /home/carlosab/.mozilla/plugins PERO No tengo .mozilla Comando cp mas información root@DEBIAN:/home/carlosab#man cp [enter] -- Servicios:. http://mamalibre.com.ar/servicios.php MamaLibre, Casa en Lincoln, Ituzaingo 1085 CP6070, Buenos Aires, Argentina pgptu7Va6kqyi.pgp Description: PGP signature
Re: Crontab no ejecuta tarea a la hora programada.
El 09/02/2014, a las 00:14, Ramses ramses.sevi...@gmail.com escribió: El 08/02/2014, a las 21:31, Camaleón noela...@gmail.com escribió: El Sat, 08 Feb 2014 21:11:55 +0100, Ramses escribió: Me he encontrado una cosa algo extraña... Tengo un contenedor OpenVZ sobre un Server PROXMOX. En dicho contenedor configuro una tarea en crontab para que se ejecute, por ejemplo, a las 22:00, pero la tarea no se ejecuta a esa hora, sino que lo hace una hora más tarde, a las 23:00. He mirado la hora, tanto en el Contenedor como en el Server PROXMOX, con el comando date, y en ambos casos es correcta. Bueno, eso sí que es raro. ¿La hora del registro de ejecución de la tarea es correcta? ¿Has comprobado la zona horaria, que sea la adecuada? Programo la tarea a las 23:00, se ejecuta a las 00:00, el el syslog aparece ejecutada a las 00:00, y ambos sistemas, tanto el Host como el OpenVZ tienen la hora correcta, las 00:00. Lo que acabo de darme cuenta es que al pedirle la fecha, en vez de darme la UTC me da la CET. ¿De dónde está sacando la hora de ejecución crontab? Pues te diría que del anfitrión/nodo, o al menos la mayoría de soluciones de virtualización usan su propio sistema de sincronización con la máquina que hace de host pero no está de más añadir tu propia solución en el contenedor que pasa por usar ntpd o algún paquete ligero que mantenga la hora de la VM ajustada. Están en hora, el tema es que lo que programe en el crontab se ejecuta una hora después. ¿A alguien le ha pasado algo parecido?. Saludos, Ramses -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/88c6a822-aa01-4702-8092-16390eb06...@gmail.com
Re: Crontab no ejecuta tarea a la hora programada.
El día 8 de febrero de 2014, 21:11, Ramses ramses.sevi...@gmail.com escribió: Hola a todos, Me he encontrado una cosa algo extraña... Tengo un contenedor OpenVZ sobre un Server PROXMOX. En dicho contenedor configuro una tarea en crontab para que se ejecute, por ejemplo, a las 22:00, pero la tarea no se ejecuta a esa hora, sino que lo hace una hora más tarde, a las 23:00. He mirado la hora, tanto en el Contenedor como en el Server PROXMOX, con el comando date, y en ambos casos es correcta. ¿De dónde está sacando la hora de ejecución crontab? Saludos y gracias, Ramses Hola. Es muy extraño. Manda a la lista la salida de los comandos date y crontab- l S2. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAGw=rHiwsp4Zhp2XpsADmUp5gWOB+ofw+MxTcJ7fNq¼qj...@mail.gmail.com
Copiar libflashplayer.so en .mozilla
GENTE GRACIAS, vamos a arrancar de CERO. Mi Iceweasel no tiene el Flash Player. Tengo el archivo: libflashplayer.so (ya lo descomprimi) Lo quise copiar en: /usr/lib/mozilla/plugins/ No me deja. Porque no tengo permiso. En: /home/carlosab/.mozilla/plugins .mozilla -no lo veo porque esta oculto.- Que comando debería usar para que sea visible? Creo que me sera mas facil copiar y pegar con el mouse ;) (se puede?) Es que tengo que ir conociendo de apoco los comandos, eh usado la Terminal con el ubuntu hace un tiempo atras pero no me acuerdo nada. :( (mejor ayudenme en este hilo que creo que es mas claro para todos -por el titulo/asunto-) Carlos Gracias: Santiado J. Lopez B. Ricardo C.N. Eduardo R. Fabian B. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391903086.4398.37.ca...@debian.cab
Re: Crontab no ejecuta tarea a la hora programada.
El 09/02/14 00:29, Ramses escribió: Lo que acabo de darme cuenta es que al pedirle la fecha, en vez de darme la UTC me da la CET. ¡Aaaamigo! Ahora te das cuenta del fallo... :) -- Saludos de Santiago José López Borrazás. signature.asc Description: OpenPGP digital signature
Re: Copiar libflashplayer.so en .mozilla
El 09/02/14 00:44, Carlos escribió: GENTE GRACIAS, vamos a arrancar de CERO. Mi Iceweasel no tiene el Flash Player. Tengo el archivo: libflashplayer.so (ya lo descomprimi) Lo quise copiar en: /usr/lib/mozilla/plugins/ Debes copiarlo bajo root para poder hacer eso. No me deja. Porque no tengo permiso. En: /home/carlosab/.mozilla/plugins .mozilla -no lo veo porque esta oculto.- Si tu home estás haz esto: cd .mozilla Y verás que entrarás. Aunque, puedes verlo con ls -l como te han sugerido anteriormente. Que comando debería usar para que sea visible? ls -l Creo que me sera mas facil copiar y pegar con el mouse ;) (se puede?) No. Tienes que programar el Nautilus para que te muestren los ocultos que empiezan con un '.'. Sino, no te va a dejar. Es que tengo que ir conociendo de apoco los comandos, eh usado la Terminal con el ubuntu hace un tiempo atras pero no me acuerdo nada. :( Como hemos dicho arriba, si quieres descomprimido ya: cp libflashplayer.so /home/carlosab/.mozilla/plugins ¡Acabarás mucho antes! ¡Ya descubrirás muchas cosas aún poco a poco! :) (mejor ayudenme en este hilo que creo que es mas claro para todos -por el titulo/asunto-) :-) Con el tiempo verás que es muy fácil tener el Linux para tu mejor experiencia como novato. Luego es cuando tendrás que lidiar con otras cosas nuevas poco a poco. :) ¡Con paciencia! -- Saludos de Santiago José López Borrazás. signature.asc Description: OpenPGP digital signature
Re: Copiar libflashplayer.so en .mozilla
El 09/02/14 01:00, Santiago José López Borrazás escribió: Que comando debería usar para que sea visible? ls -l No es correcto. La orden para listar los archivos y directorios ocultos es ls -a -- www.LinuxCounter.net Registered user #558467 has 1 linux machines Registered Linux machine #2003003 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/ld6hfc$o22$1...@ger.gmane.org
Re: Copiar libflashplayer.so en .mozilla
El 09/02/14 01:18, Eduardo Rios escribió: No es correcto. La orden para listar los archivos y directorios ocultos es ls -a Bueno, el -a. :þ Gracias por corregirme. :) -- Saludos de Santiago José López Borrazás. signature.asc Description: OpenPGP digital signature
Re: Copiar libflashplayer.so en .mozilla
Eduardo Rios eduri...@yahoo.es ESCRIBIO: No es correcto. La orden para listar los archivos y directorios ocultos es ls -a _ ESCRIBI: carlosab@DEBIAN:~$ ls -a DEVOLVIO: -listado, CELESTE = carpetas LILA = archivos - ES CORRECTO? Mi pregunta era: que comando usar para que todo .NAME sea visible dentro de la Carpeta personal Carlos -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391906496.4398.43.ca...@debian.cab
Re: [OT] varias ip en varias ethernet de serv pro hp
El Fri, 7 Feb 2014 23:51:11 +0100 Czm Ext czm@gmail.com escribió: Te das cuenta de que no aportas nada?. Ni un comentario a la persona que solicita ayuda y te atreves encima a juzgar. Esto es un blau, blau 1 No te solicite que me envies nada en forma privada. LEO la lista 2 En este caso caso mi aporte es dejar en descubierto a gente que con el solo afan de querer figurar, pone cualquier cosa que NO SIRVE a la solucion del problema planteado. 3 segui participando... otra vez sera El 07/02/2014 23:30, Angel Claudio Alvarez an...@angel-alvarez.com.ar escribió: El Fri, 7 Feb 2014 02:36:04 +0100 Czm Ext czm@gmail.com escribió: compañero intenta construir y deja las criticas destructivas para tu casa ;) Error, no son destructivas, son para mantener el nivel de la lista Si cualquiera postea cualquier cosa como solucion no sirve para nada Y el postear por el solo hecho de hacerlo sin un argumento tecnico valido tambien habla de la baja calidad de los componentes de la lista. Lamento mucho que te molesten las correcciones, pero si vas a dar una solucion que sea eficiente, si no caemos en la mediocridad El 07/02/2014 01:25, Angel Claudio Alvarez an...@angel-alvarez.com.ar escribió: El Thu, 06 Feb 2014 00:59:52 +0100 czm.ext czm@gmail.com escribió: On 05/02/14 23:51, Angel Claudio Alvarez wrote: El Wed, 5 Feb 2014 15:18:55 +0100 Czm Ext czm@gmail.com escribió: recuerda que para asignar varias ips a un mismo interfaz debes usar alias. busca en google ip alias linux. y que tiene que ver este recordatorio con el asunto?? Suena a qué está haciendo un doble uso de eth1, ya sea por el programa que usa, el uso de alias si debe mantener la configuración de ese interfaz puede ayudarle. Suena?? nunca aprobaste comprension de textos no? El asunto es claro, y en el cuerpo el compañero aclara que quiere poner ips distintas en las CUATRO placas ethernet que tiene. Lo tuyo no es aporte es ruido. Si nos puedes enviar la salida de los comandos, ip ad;ip link Tendremos más información con la que poder ayudarte. suerte El 05/02/2014 15:16, Gonzalo Rivero fishfromsa...@gmail.com escribió: El mié, 05-02-2014 a las 10:09 -0400, l...@ida.cu escribió: Buenos días a todos Tengo instalado debian 7 64bit en un server pro HP, este posee 4 interfaces de red En el administrador de red solo me deja configurar una sola, detectando las 4 posibilidades de red. Cuando tecleo otra ip para otra interface, no me trabaja. Si tecleo esto por etc/network/interfaces la coge pero cuando reinicio el servicio me da esto: /network# /etc/init.d/networking restart [warn] Running /etc/init.d/networking restart is deprecated because it may not re-enable some interfaces ... (warning). [] Reconfiguring network interfaces...RTNETLINK answers: File exists Failed to bring up eth1. done. alguna idea agradezco toda ayuda ifdown ethX; ifup ethX donde X es el número de interface -- (-.(-.(-.(-.(-.(-.-).-).-).-).-).-) -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391609775.2505.0.ca...@eeepc.ucasal.ar -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/52f2d078.6090...@gmail.com -- Angel Claudio Alvarez an...@angel-alvarez.com.ar -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20140206212504.02777c95ed04f9eb3337a...@angel-alvarez.com.ar -- Angel Claudio Alvarez an...@angel-alvarez.com.ar -- Angel Claudio Alvarez an...@angel-alvarez.com.ar -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20140208221457.eb4e16bd0f11ef90b403e...@angel-alvarez.com.ar
Re: Primeros tropiezos... :)
El día 8 de febrero de 2014, 20:19, Fabián Bonetti mama21m...@riseup.net escribió: On Sat, 08 Feb 2014 20:09:24 -0300 Carlos cab.s...@gmail.com wrote: Entre a Terminal de Root INGRESE: whoami [enter] DEVOLVIO: root root@DEBIAN:/home/carlosab# ahora que comando uso para copiarlo? En cuanto a: /home/tuusuario/.mozilla/plugins seria: /home/carlosab/.mozilla/plugins PERO No tengo .mozilla Comando cp mas información Carlos te recomiendo que visites el siguiente enlace [1], ya que hasta ahora solo has estado repitiendo lo que todos te dicen que hagas, y tengo la impresión que no estas entendiendo nada, ni de nivel de jerarquía de usuarios, ni permisos, ni jerarquía de archivos, etc. Luego puedes revisar el resto de la documentación en [2], baja el doc del [3] y tenlo a mano cuando trabajes con Debian. [1] https://wiki.debian.org/es/FrontPage [2] http://www.debian.org/doc/ [3] http://www.debian.org/doc/manuals/refcard/refcard.es.pdf Todo lo anterior hará que tu experiencia de aprendizaje sea más placentera. suerte. -- usuario linux #274354 normas de la lista: http://wiki.debian.org/es/NormasLista como hacer preguntas inteligentes: http://www.sindominio.net/ayuda/preguntas-inteligentes.html -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/caaizax7ytwv+9fhutsurjjoebeytgrkvxxeftfm+ais5rwk...@mail.gmail.com
Re: Copiar libflashplayer.so en .mozilla
Santiago José López Borrazás sjlop...@gmail.com ESCRIBIO Como hemos dicho arriba, si quieres descomprimido ya: cp libflashplayer.so /home/carlosab/.mozilla/plugins ¡Acabarás mucho antes! ¡Ya descubrirás muchas cosas aún poco a poco! :) Usando Terminal porque me figura también Terminal de Root ESCRIBI: carlosab@DEBIAN:~$ cp libflashplayer.so /home/carlosab/.mozilla/plugins DEVOLVIO: carlosab@DEBIAN:~$ Supongo que ya copio libflashplayer.so dentro de la carpeta plugins -- /home/carlosab/.mozilla/plugins Y AHORA? Abri el Iceweasel entre a YouTube y nada. No anda el Flash -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391909230.4398.50.ca...@debian.cab
Re: Primeros tropiezos... :)
Me parece que estamos ante un troll. -- Servicios:. http://mamalibre.com.ar/servicios.php MamaLibre, Casa en Lincoln, Ituzaingo 1085 CP6070, Buenos Aires, Argentina pgpM1nqDRpwDF.pgp Description: PGP signature
Re: Primeros tropiezos... :)
El 09/02/14 02:28, Fabián Bonetti escribió: Me parece que estamos ante un troll. Ay, ay, ay... -- Saludos de Santiago José López Borrazás. signature.asc Description: OpenPGP digital signature
Re: Primeros tropiezos... :)
CREO QUE TENDRE QUE ARREGLARMELAS COMO PUEDA, MIL DISCULPA POR LO QUE VOY A DECIR, Y MIL GRACIAS A LOS QUE LO RE-INTENTARON.. PERO NO SOY UN TROLL, DEBEN COMPRENDER QUE SOY NUEVO. Y NO ME SALE, PERO DE ALGO SE PUEDE ESTAR SEGURO... INSISTO PORQUE QUIERO APRENDER. LA PAGINA: www.debian.org no se me hizo facil acceder a los manuales, o no le entiendo como llegar a descargar algo concreto. Los Links parecen no darme el manual. EN FIN.. NI EL YOUTUBE PUEDO USAR PARA ORIENTARME PORQUE NO TENGO EL FLASH P. Carlos PD: GRACIAS NUEVAMENTE POR INTENTAR AYUDARME Y DISCULPEN. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391910411.4398.59.ca...@debian.cab
Re: Primeros tropiezos... :)
On Sat, 08 Feb 2014 22:46:51 -0300 Carlos cab.s...@gmail.com wrote: Carlos disculpa. Vamos a intentarlo de nuevo. Aquí tienes la forma de tu navegador https://wiki.debian.org/Iceweasel A mi con seamonkey http://www.seamonkey-project.org/ seamonkey lo bajo y lo coloco en /opt/seamonkey Me anda todo super bien todo. Con los pasos anteriores SAludos -- Servicios:. http://mamalibre.com.ar/servicios.php MamaLibre, Casa en Lincoln, Ituzaingo 1085 CP6070, Buenos Aires, Argentina pgpj0wH3l7RSa.pgp Description: PGP signature
Re: Copiar libflashplayer.so en .mozilla
El día 8 de febrero de 2014, 22:27, Carlos cab.s...@gmail.com escribió: Santiago José López Borrazás sjlop...@gmail.com ESCRIBIO Como hemos dicho arriba, si quieres descomprimido ya: cp libflashplayer.so /home/carlosab/.mozilla/plugins ¡Acabarás mucho antes! ¡Ya descubrirás muchas cosas aún poco a poco! :) Usando Terminal porque me figura también Terminal de Root ESCRIBI: carlosab@DEBIAN:~$ cp libflashplayer.so /home/carlosab/.mozilla/plugins DEVOLVIO: carlosab@DEBIAN:~$ Supongo que ya copio libflashplayer.so dentro de la carpeta plugins -- /home/carlosab/.mozilla/plugins Y AHORA? Abri el Iceweasel entre a YouTube y nada. No anda el Flash Creo que has equivocado la pregunta, según entiendo lo que quieres es tener instalado el flash player de adobe (nonfree). Para eso: a) debes tener habilitado el repositorio non-free en tu fichero sources.list b) refrescar el listado de paquetes disponibles: # apt-get update c) instalar el paquete: flashplugin-nonfree # apt-get install flashplugin-nonfree Observación: algunas veces me ha pasado que deja de funcionar tras alguna actualización, entonces podrías ver si está configurado en el sistema de alternativas como el valor por omisión: * Para ver como se llama la alternativa relacionada a flash: $ update-alternatives --get-selections | grep flash flash-mozilla.so auto /usr/lib/flashplugin-nonfree/libflashplayer.so * Para listar las opciones disponibles de esa alternativa: $ update-alternatives --list flash-mozilla.so /usr/lib/flashplugin-nonfree/libflashplayer.so /usr/lib/gnash/libgnashplugin.so * Para configurar la opción para una alternativa: $ update-alternatives --config flash-mozilla.so Existen 2 opcioens para la alternativa flash-mozilla.so (que provee /usr/lib/mozilla/plugins/flash-mozilla.so). Selección RutaPrioridad Estado * 0/usr/lib/flashplugin-nonfree/libflashplayer.so 50 modo automático 1/usr/lib/flashplugin-nonfree/libflashplayer.so 50 modo manual 2/usr/lib/gnash/libgnashplugin.so 10 modo manual Pulse Intro para mantener el valor por omisión [*] o pulse un número de selección: Y con eso creo que ya tienes para divertirte, un abrazo, -- §~^Calabaza^~§ from Villa Elisa, Paraguay http://calablogbaza.blogspot.com/ http://es.wikipedia.org/wiki/Top-posting http://es.wikipedia.org/wiki/Netiquette | http://www.ietf.org/rfc/rfc1855.txt http://www.sindominio.net/ayuda/preguntas-inteligentes.html -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cada3qfzhu0bujf_xnpf6qlakqjohhnnj4qntwxs0rndtuwp...@mail.gmail.com
Re: Primeros tropiezos... :)
Fabián Bonetti escribió: On Sat, 08 Feb 2014 22:46:51 -0300 Carlos cab.s...@gmail.com wrote: Carlos disculpa. Vamos a intentarlo de nuevo. Aquí tienes la forma de tu navegador https://wiki.debian.org/Iceweasel A mi con seamonkey http://www.seamonkey-project.org/ seamonkey lo bajo y lo coloco en /opt/seamonkey Me anda todo super bien todo. Con los pasos anteriores SAludos -- Servicios:. http://mamalibre.com.ar/servicios.php MamaLibre, Casa en Lincoln, Ituzaingo 1085 CP6070, Buenos Aires, Argentina Empezemos con algo sencillo, no escibas en mayúsculas, eso se deja entender como si estuvieras gritando. Segundo navegar por una página es tan sencillo como leer y darle clic al link de tu interés. Tercero en Google si colocas manual de debian encontrarás lo que buscas. Cuarto que seas novato no te exime de analizar las cosas que aquí te digamos, de nada valdrán nuestros esfuerzos por ayudarte si tu no te esfuerzas un poco en comprender lo que decimos y buscar por tu propio pue un poco más. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391918280065.f9ecf44131be28@mozgaia
Re: Primeros tropiezos... :)
El día 8 de febrero de 2014, 21:16, Carlos cab.s...@gmail.com escribió: CREO QUE TENDRE QUE ARREGLARMELAS COMO PUEDA, MIL DISCULPA POR LO QUE VOY A DECIR, Y MIL GRACIAS A LOS QUE LO RE-INTENTARON.. PERO NO SOY UN TROLL, DEBEN COMPRENDER QUE SOY NUEVO. Y NO ME SALE, PERO DE ALGO SE PUEDE ESTAR SEGURO... INSISTO PORQUE QUIERO APRENDER. Que bien que insistas por querer aprender eso denota interés, pero el interés por si solo no es suficiente, hay que razonar en pro de ese interés. LA PAGINA: www.debian.org no se me hizo facil acceder a los manuales, o no le entiendo como llegar a descargar algo concreto. Los Links parecen no darme el manual. ¿Esto es en serio? ¿Te resulta dificil navegar en Debian.org para llegar los manuales? Pues en la parte de arriba hay algo que dice Soporte si das clic te consigues con los manuales, mas sencillo imposible. EN FIN.. NI EL YOUTUBE PUEDO USAR PARA ORIENTARME PORQUE NO TENGO EL FLASH P. No puedes instalar flash, pero con una simple busqueda en google que diga: instalar flash player en debian Te consigues con 108.000 resultados que te dicen exactamente como hacerlo, y ni pensar que el primero que aparece resulta la forma mas fácil de hacerlo. http://www.forosla.com/como-instalar-flash-player-en-debian/ Carlos PD: GRACIAS NUEVAMENTE POR INTENTAR AYUDARME Y DISCULPEN. No hay de que :) -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391910411.4398.59.ca...@debian.cab -- Dios en su Cielo, todo bien en la Tierra *** -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAGGkdu=6OTPU6z4mOFMYAojJzDd0FbX7bVc9Oqo1BAfDp+q...@mail.gmail.com
Re: Primeros tropiezos... :)
El día 8 de febrero de 2014, 22:46, Carlos cab.s...@gmail.com escribió: CREO QUE TENDRE QUE ARREGLARMELAS COMO PUEDA, MIL DISCULPA POR LO QUE VOY A DECIR, Y MIL GRACIAS A LOS QUE LO RE-INTENTARON.. PERO NO SOY UN TROLL, DEBEN COMPRENDER QUE SOY NUEVO. Y NO ME SALE, PERO DE ALGO SE PUEDE ESTAR SEGURO... INSISTO PORQUE QUIERO APRENDER. LA PAGINA: www.debian.org no se me hizo facil acceder a los manuales, o no le entiendo como llegar a descargar algo concreto. Los Links parecen no darme el manual. EN FIN.. NI EL YOUTUBE PUEDO USAR PARA ORIENTARME PORQUE NO TENGO EL FLASH P. Carlos PD: GRACIAS NUEVAMENTE POR INTENTAR AYUDARME Y DISCULPEN. !Calle boca, calle boca...¡ mm ¿Y los enlaces que te dejé tampoco los pudiste abrir o descargar el pdf? Para eso no necesitas el flash player. Mira más fácil, abre synaptic busca flash y selecciona flashplugin-nonfree pincha en aplicar y voila, listo el flash player directo de adobe. Suerte. -- usuario linux #274354 normas de la lista: http://wiki.debian.org/es/NormasLista como hacer preguntas inteligentes: http://www.sindominio.net/ayuda/preguntas-inteligentes.html -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/caaizax6geug4awouo1jf1vrm0pf_saiamf0k83v6wufxbbo...@mail.gmail.com
FREENAS 9.2
Olá pessoal! Estou com problemas na configuração de pasta base e quota para usuarios no freenas 9.2. Nao estou conseguindo configurar o usuario para usar sua pasta apenas e definir quanto de disco ele usará no storage. Qualquer ajuda será muito bem vinda. Obrigado.
Re: [Off Tipic] Livro LDAP
O livro do Marcos Sungalia tá desatualizado, mas dá para usar. Att, Tobias http://gnu.eti.br -BEGIN GEEK CODE BLOCK- Version: 3.12 GCS/CM/G/H/IT/L/SS d?(--) s++:+ a-- C+++ UL++ P+ L !E@W+++ !N o? K- w !O !M@ !V@ PS PE-- !Y@ PGP t+ 5? X? R+ !tv b+ DI+ !D@ G e- h+ r-- y? --END GEEK CODE BLOCK-- 2014-01-27 13:15 GMT-02:00 Fabricio Cannini fcann...@gmail.com: O Anahuac lançou um livro faz pouco : http://www.brasport.com.br/e-books/informatica-e-tecnologia-br/openldap- extreme-ebook.html O livro da zytrax ( em inglês ) eu uso com frequência : http://www.zytrax.com/books/ldap/ [ ]'s -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/52e67801.5010...@gmail.com
Re: harddrives with built-in NAND fkash
On Feb 7, 2014, at 1:25 PM, Ric Moore wayward4...@gmail.com wrote: Do they require any special formating or partitioning to take advantage of the 8 gigs of built-in NAND flash? I'm looking at a Seagate Solid State Hybrid drive - ST2000DX001 Thanks for any info and/or suggestions. Ric Fabrice Vaillant replied: I have used the same kind of drive as a main drive on my laptop. While I have no proof that the extra nand where used, I tend to think they were. There wasn't any extra drive showing in gparted or other tool. Plus those nand are used by the drive to store most used file and quicken the loading of them, so I don't think it's the OS job to deal with them. Fabrice I just bought a pair of the Seagate drives to use as system drives for a couple of servers. As I read the specs, Fabrice is correct: The drive itself will figure out what to put in flash based on usage -- the user doesn't get a say. I'm hoping that it will decide to put the interesting parts of root and /usr there (to speed up booting), along with the database indexes for the servers (to speed up normal production use). It would be fun to have some kind of an ioctl to figure out what actually happens... Not much chance of that, I'm guessing, but it sure would be interesting! Anybody who works for Seagate on this list? Rick -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/8f9f2216-36c3-4be4-bb6c-cca5ab96c...@pobox.com
Re: harddrives with built-in NAND fkash
On 02/08/2014 02:45 AM, Ric Moore wrote: On 02/07/2014 04:39 PM, Fabrice Vaillant wrote: I have used the same kind of drive as a main drive on my laptop. While I have no proof that the extra nand where used, I tend to think they were. There wasn't any extra drive showing in gparted or other tool. Plus those nand are used by the drive to store most used file and quicken the loading of them, so I don't think it's the OS job to deal with them. Thanks! I was wondering about that and didn't want to jump into deep water without looking first. Do you see any improvement ...like boot times? I'd hate for the darn thing to be looking for a Windows file system to be installed. Ric I did find it quick to boot but I was coming from a hold hdd on different system, so I can't directly compare. On the other hand now I have repalced it by a ssd and the boot time seems the same whereas big application like gimp, that I barely use, seems faster, so I'd say this NAND were put to a good use. Don't worry about it needing a windows though. Fabrice -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/52f5ec53.10...@gmail.com
Re: How to block kernel updates
On Sat, 8 Feb 2014 15:10:09 +1300 Chris Bannister cbannis...@slingshot.co.nz wrote: On Fri, Feb 07, 2014 at 10:07:34PM +, Joe wrote: You can also remove any kernel metapackage e.g. linux-image-amd64. Apt will not normally attempt to replace whatever kernel you have installed, as it is a bit risky, and as you say, needs quite a chunk How is it risky? I run three or four sid installations. Occasionally a new kernel does not boot, often due to a grub problem. There was a year or so when someone forgot that a separate boot partition is possible three times. The second and third occasions were at least easy to fix once I knew what was happening. Anyway, you're forgetting about security updates. Yes, it wasn't intentional, I forgot to return things to normal once the problem had been fixed. -- Joe -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20140208085550.76675...@jretrading.com
Re: How to block kernel updates
On Sat, Feb 08, 2014 at 08:55:50AM +, Joe wrote: On Sat, 8 Feb 2014 15:10:09 +1300 Chris Bannister cbannis...@slingshot.co.nz wrote: On Fri, Feb 07, 2014 at 10:07:34PM +, Joe wrote: You can also remove any kernel metapackage e.g. linux-image-amd64. Apt will not normally attempt to replace whatever kernel you have installed, as it is a bit risky, and as you say, needs quite a chunk How is it risky? I run three or four sid installations. Occasionally a new kernel does not boot, often due to a grub problem. AFAIUI, if the package has a different name, as newer releases of kernels do, then APT won't consider it an update, it is just another package. Hopefully, the average newbie to this list does not run Sid, but giving the impression that APT won't replace kernels as it is a bit risky is incorrect and misleading. APT will happily replace any package you tell it too, including kernels. Of course, for a security patch, the package name doesn't change, just the version -- If you're not careful, the newspapers will have you hating the people who are being oppressed, and loving the people who are doing the oppressing. --- Malcolm X -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20140208094042.GA14729@tal
Re: How to block kernel updates
On Sat, Feb 08, 2014 at 07:57:51AM +, Roelof Wobben wrote: Oke, I will do a re-install of my 80G box. What will be a good partition scheme for normal desktop use? Did you read my previous post? I'd just give it the whole disk - one partition. Although, you may want a separate home partion, your choice, now that you know the pitfalls of choosing the wrong sizes. :) BTW, there is probably more wisdom in the results of a Google search than I could post with just a few minutes thought. -- If you're not careful, the newspapers will have you hating the people who are being oppressed, and loving the people who are doing the oppressing. --- Malcolm X -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20140208095049.GB14729@tal
RE: How to block kernel updates
Date: Sat, 8 Feb 2014 22:40:43 +1300 From: cbannis...@slingshot.co.nz To: debian-user@lists.debian.org Subject: Re: How to block kernel updates On Sat, Feb 08, 2014 at 08:55:50AM +, Joe wrote: On Sat, 8 Feb 2014 15:10:09 +1300 Chris Bannister cbannis...@slingshot.co.nz wrote: On Fri, Feb 07, 2014 at 10:07:34PM +, Joe wrote: You can also remove any kernel metapackage e.g. linux-image-amd64. Apt will not normally attempt to replace whatever kernel you have installed, as it is a bit risky, and as you say, needs quite a chunk How is it risky? I run three or four sid installations. Occasionally a new kernel does not boot, often due to a grub problem. AFAIUI, if the package has a different name, as newer releases of kernels do, then APT won't consider it an update, it is just another package. Hopefully, the average newbie to this list does not run Sid, but giving the impression that APT won't replace kernels as it is a bit risky is incorrect and misleading. Im not the average newbie and Im running jessie now. Can anyone tell me a good partition scheme for a 80G disk so im not running again in problems. Roelof -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/dub121-w31a238505241730cf42c9ae...@phx.gbl
Re: How to block kernel updates
On Sat, 8 Feb 2014 22:40:43 +1300 Chris Bannister cbannis...@slingshot.co.nz wrote: On Sat, Feb 08, 2014 at 08:55:50AM +, Joe wrote: On Sat, 8 Feb 2014 15:10:09 +1300 Chris Bannister cbannis...@slingshot.co.nz wrote: On Fri, Feb 07, 2014 at 10:07:34PM +, Joe wrote: You can also remove any kernel metapackage e.g. linux-image-amd64. Apt will not normally attempt to replace whatever kernel you have installed, as it is a bit risky, and as you say, needs quite a chunk How is it risky? I run three or four sid installations. Occasionally a new kernel does not boot, often due to a grub problem. AFAIUI, if the package has a different name, as newer releases of kernels do, then APT won't consider it an update, it is just another package. Hopefully, the average newbie to this list does not run Sid, but giving the impression that APT won't replace kernels as it is a bit risky is incorrect and misleading. APT will happily replace any package you tell it too, including kernels. Of course, for a security patch, the package name doesn't change, just the version Yes, which is why the metapackage is necessary if you want to keep up with the latest kernel automatically. The risk is about having that happen without noticing. Generally, I keep an eye on what sid is updating, but even this long after a release, it's still tens of megabytes a day. I don't check all of them, but hopefully listbugs shows the worst problems, and I can deal with trouble with minor packages. I do look carefully at new kernels, and have a quick check on the Net to see if anyone else has had problems, so I consider it a risk to upgrade a kernel in sid, or even testing, automatically, given the chance that I will be distracted and fail to notice it. Yes, I realise I should carefully scrutinise every single package before upgrading it, not just kernels, but if you use sid in anger, and there's no point in just keeping it around as a curiosity, then life is too short. -- Joe -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20140208100250.33264...@jretrading.com
Re: How to block kernel updates
On Sat, 8 Feb 2014 09:52:17 + Roelof Wobben rwob...@hotmail.com wrote: Im not the average newbie and Im running jessie now. Can anyone tell me a good partition scheme for a 80G disk so im not running again in problems. As Chris and others have said elsewhere, one partition is generally OK on a workstation. You might keep /home on a separate one, to make reinstallation a little easier if it becomes necessary, but if you're keeping valuable data in /home, you should be backing it up anyway. On a server, there is a risk that /var will suddenly explode in size or just enlarge slowly without being managed properly. This cannot be allowed to choke the system and kill it, so at least /var will have a separate partition. The chance of this happening on a workstation, generally rebooted every day and not running external services, is very small. Also, a workstation will normally have a human sitting at the screen most of the time, and a warning of low disc space can be dealt with. I run several partitions on my main workstation, because I experiment a bit, but my mobile installations are single-partition. The main workstation has LVM installed, so I can resize the partitions if necessary. -- Joe -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20140208101311.7623e...@jretrading.com
Re: About to format the whole laptop, need some partitioning advice.
Something really bad happened. I went to format all my partitions from the windows 8 installation menu (Bootable usb) and when I went to format boot partition of windows 100 mb,the installer hanged (typical of windows) After waiting for say half an hour, I hard-rebooted the laptop and it was stuck on the bios splash screen. I could do nothing, could not enter bios,nor could enter the boot menu. So I took my laptop to the Asus service center. They connected my hardisk to a casing and the hardisk was not even detected on their computers. So they confidently said that your hardisk has been damaged and no matter what you do, you cannot revive it. You can get a new hardisk for blah blah money. I am so badly screwed. After waiting for two months to get my laptop back (motherboard replacement) I am so badly screwed. I so badly wanted to prepare for gsoc, literally cried. Thanks a lot everyone for taking out their precious time and replying so beautifully to me. So thankful to everyone! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/ca+jf9ahgztwygvevd42fantoega-15rl+6hrybi_rznaywc...@mail.gmail.com
Re: How to block kernel updates
On Sat, 2014-02-08 at 10:02 +, Joe wrote: The risk is about having that happen without noticing. Generally, I keep an eye on what sid is updating, but even this long after a release, it's still tens of megabytes a day. I don't check all of them I always read all package names before updating, for each distro I use. For Arch in addition I should read the news on the homepage, but often I don't do it. Newbies are unable to evaluate what package updates could be very risky, so for Debian they should stay with stable and for Arch they always should read the news first. And they never ever should update Ubuntu :D. Btw. backups are a nice invention ;). A tidy packages cache is useful too. IIRC there's a roll back archive/repository for Debian too, but I don't remember the URL. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391855057.7009.14.camel@archlinux
Re: How to block kernel updates
On 02/08/2014 11:52 AM, Roelof Wobben wrote: Date: Sat, 8 Feb 2014 22:40:43 +1300 From: cbannis...@slingshot.co.nz To: debian-user@lists.debian.org Subject: Re: How to block kernel updates On Sat, Feb 08, 2014 at 08:55:50AM +, Joe wrote: On Sat, 8 Feb 2014 15:10:09 +1300 Chris Bannister cbannis...@slingshot.co.nz wrote: On Fri, Feb 07, 2014 at 10:07:34PM +, Joe wrote: You can also remove any kernel metapackage e.g. linux-image-amd64. Apt will not normally attempt to replace whatever kernel you have installed, as it is a bit risky, and as you say, needs quite a chunk How is it risky? I run three or four sid installations. Occasionally a new kernel does not boot, often due to a grub problem. AFAIUI, if the package has a different name, as newer releases of kernels do, then APT won't consider it an update, it is just another package. Hopefully, the average newbie to this list does not run Sid, but giving the impression that APT won't replace kernels as it is a bit risky is incorrect and misleading. Im not the average newbie and Im running jessie now. Can anyone tell me a good partition scheme for a 80G disk so im not running again in problems. Roelof Hi Roelof, My workstation uses Debian GNU/Linux 7 (amd64), and my partition scheme is : Filesystem 1K-blocks Used Available Use% Mounted on rootfs 48059932 19464828 26153756 43% / /dev/md2 1872874484 833246124 944491852 47% /home As you can see the root file system is about 50GB and only 20GB are used. On the other hand directories what are supposed to contains a lot of data are linked to /home like /var/lib/postgresql - /home/postgresql, but you can do the same for valuable data such as git repositories, SVN, etc. Because your disk is only 80GB you may prefer single root partition, but do not forger to make backup when you are going to make a fresh install on the disk. HTH Best regards Georgi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/52f6071f.8090...@oles.biz
Re: How to block kernel updates
On Sat, 2014-02-08 at 10:13 +, Joe wrote: As Chris and others have said elsewhere, one partition is generally OK on a workstation. You might keep /home on a separate one, to make reinstallation a little easier if it becomes necessary, but if you're keeping valuable data in /home, you should be backing it up anyway. Yes, one partition has got the advantage that you don't need to care about how to allocate HDD space. Even a separated /home partition isn't needed, _but_ if you e.g. need to read/write data for real-time usage, it might be useful to have a separated drive for this data. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391855378.7009.18.camel@archlinux
Re: About to format the whole laptop, need some partitioning advice.
Someone asked how much RAM you have. How much? 1G is not enough with Gnome 3. More than 4G is more than is necessary under many normal loads, but if you don't have 4G, 4G is reasonable. If you can add memory or replace what you have and have the money to spare. I have 8 GB ram :) What are Neo and Workstation for? (May I ask?) They contained movies and PDF and were windows partitions and will be going off. Did that tool also have diagnostics? Was it the ASUS provided tool? Did you run some tool to check that your HD is not having smartdrive issues? (Ergo, not dying an untimely death.) No it just gave me the copying speed of HDD. Its a standard linux utility but I forgot the name. Suggestions from me (and no reasons to trust me more than anyone else, perhaps): / (root partition) should be at least large enough to handle a /var gone out of control if /var doesn't mount, or if you don't have a separate /var. Minimum 4G (base ten or base two, either way). I'd go with 8G, since you're starting with a drive bigger than 120G. Larger if you do choose to combine /usr and /var, and so forth, with the root partition. /etc? I've seen recommendations to separate /etc as a partition. It's a bit of a trap for a home-use machine, don't do it this time around. Keep /etc with /. /bin? /sbin? /ilb? Keep these combined with / unless you like to confuse the kernel when it i trying to boot and can't find any of the standard tools or even some of the libraries it needs to boot even to single-user mode these days. /usr? There are strange things that happen to Red Hat (Fedora, etc.) style machines during boot that indicate against /usr being separate. I've been bitten by them on Fedora, which is one of the reasons I am using Debian now. I keep /usr separate because it tends to change a lot when you install and remove packages. It's that simple. However, you don't need more than 32G for /usr unless you really go crazy installing (literally) every package available, and installing a lot of packages is one good way to slow your machine down on boot and login. (Of course, if you don't install lots of stuff, you never get to play with it and discover new tools. :-/) Well, be a bit careful what you install beyond what you know you need, but not too careful. Anyway, 32G for /usr should not be overkill, and won't be too time consuming when it has to be fsck-ed. fsck demonstrates one good reason to keep partitions small. Large partitions take longer on fsck and similar maintenance. And if you ever have to search for lost text files with testdisk or such, larger than 32G can be a real, serious show stopper. (I gave up when I lost two-days' work to a bad Makefile just two weeks back, because the files were text files and too small for testdisk to see in the partition they were in. Could have resorted to lower-level techniques like grep /dev/sda3 or hexdump -C | grep, but I decided it would be faster to use my gray-matter and type the stuff in from scratch. It was. (First time took two days to produce the files, second time took four hours, and was good for checking my work. Programming is like that in a lot of cases. 8-o) I also like to be a good programmer :) Unfortunately, /usr/bin, /usr/sbin, and /usr/lib may contain stuff that the boot-up process wants to use, and may thus cause problems if they can't be mounted. As I say, I saw that on Fedora. Not on Debian. That says something about the differences between the two, I think. (Fedora folks keep themselves busy inventing solutions to problems of their own making, it seems to me. That's okay for them. Maybe someday in the distant future, the side-tour on systemd will bear meaningful fruit. I don't expect it to happen this year or next, and that's another reason I'm using Debian now. They can have their fun. I need to focus on other things, myself.) So, for Debian, I recommend a separate /usr, 32G since you have it. /tmp? Some say it is not used any more. I say give it at least 8G. 16G since you have a big HD to start with. I've used it on odd occasions, and making it too small is bad news. Keeping it separate, so that you can separate the stuff that changes from the stuff that doesn't is still a good idea. /var? Similar to my advice on /tmp, separate partition to separate the stuff that changes a lot from the stuff that doesn't change as much. But /var tends to stay around, where /tmp is supposed to be cleared (or clear-able) on boot. So, I'd recommend 16G or even 32G for /var. /var gets really hammered on system updates. /var/log gets filled up quickly when things go south. And there is /var/tmp which gets used more than /tmp these days. (Both still get used, even though there are those who claim that ramdisk temporary files make more sense. Such arguments tend to ignore certain real-world issues and practices.) Why is it that all partitions you are recommending are multiples of 2? Any
Re: How to block kernel updates
On Saturday 08 February 2014 09:40:43 Chris Bannister wrote: AFAIUI, if the package has a different name, as newer releases of kernels do, then APT won't consider it an update, it is just another package. aptitude has just upgraded me automatically from 3.10-x bpo to 3.11-x bpo then to 3.12-0 bpo. I imagine it depends on what it has been told to do: safe-upgrade or full-upgrade. Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201402081132.30613.lisi.re...@gmail.com
Re: How to block kernel updates
On Sat, Feb 8, 2014 at 6:32 AM, Lisi Reisz lisi.re...@gmail.com wrote: On Saturday 08 February 2014 09:40:43 Chris Bannister wrote: AFAIUI, if the package has a different name, as newer releases of kernels do, then APT won't consider it an update, it is just another package. aptitude has just upgraded me automatically from 3.10-x bpo to 3.11-x bpo then to 3.12-0 bpo. I imagine it depends on what it has been told to do: safe-upgrade or full-upgrade. Irrespective of upgrade/safe-upgrade and dist-upgrade/full-upgrade, linux-image won't be bumped up to a later kernel version if you don't have linux-image-arch installed. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAOdo=szzbg5ifwg6fh7ho4tknmompofuix0vuuvgwfj_73h...@mail.gmail.com
Re: How to block kernel updates
On Sat, 2014-02-08 at 07:29 -0500, Tom H wrote: linux-image won't be bumped up to a later kernel version if you don't have linux-image-arch installed. Let's make a real job of it. Metapackage: http://packages.debian.org/sid/linux-image-amd64 dep: linux-image-3.12-1-amd64 If you don't install the metapackage, but linux-image-3.12-1-amd64 only, than the kernel will not be automatically upgraded. There is no kernel part of this package: File list of package linux-image-amd64 in sid of architecture amd64 /usr/share/bug/linux-image-amd64/presubj /usr/share/doc/linux-image-amd64/NEWS.Debian.gz /usr/share/doc/linux-image-amd64/changelog.gz /usr/share/doc/linux-image-amd64/copyright Only the dependency is important. If you install http://packages.debian.org/sid/linux-image-3.12-1-amd64 without the metapackage, then it never will be upgraded, excepted there should be a version 3.12-2. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391863615.7009.25.camel@archlinux
Re: How to block kernel updates
On Sat, Feb 8, 2014 at 5:24 AM, Ralf Mardorf ralf.mard...@alice-dsl.net wrote: On Sat, 2014-02-08 at 10:02 +, Joe wrote: The risk is about having that happen without noticing. Generally, I keep an eye on what sid is updating, but even this long after a release, it's still tens of megabytes a day. I don't check all of them I always read all package names before updating, for each distro I use. For Arch in addition I should read the news on the homepage, but often I don't do it. Newbies are unable to evaluate what package updates could be very risky, so for Debian they should stay with stable and for Arch they always should read the news first. And they never ever should update Ubuntu :D. My parents upgrade their Ubuntu laptops, iPads, and iPhones the way that most non-technical do, when they're prompted to do so. They don't have any problems and there's no way that they'd be interested in checking package names - or understanding these names if they read them. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAOdo=SxPC2qfV2taff52LQdgdDL_K1zGxrvppP-fzLJ=dfp...@mail.gmail.com
Re: How to block kernel updates
On Sat, 2014-02-08 at 13:46 +0100, Ralf Mardorf wrote: On Sat, 2014-02-08 at 07:29 -0500, Tom H wrote: linux-image won't be bumped up to a later kernel version if you don't have linux-image-arch installed. Let's make a real job of it. Metapackage: http://packages.debian.org/sid/linux-image-amd64 dep: linux-image-3.12-1-amd64 If you don't install the metapackage, but linux-image-3.12-1-amd64 only, than the kernel will not be automatically upgraded. There is no kernel part of this package: File list of package linux-image-amd64 in sid of architecture amd64 /usr/share/bug/linux-image-amd64/presubj /usr/share/doc/linux-image-amd64/NEWS.Debian.gz /usr/share/doc/linux-image-amd64/changelog.gz /usr/share/doc/linux-image-amd64/copyright Only the dependency is important. If you install http://packages.debian.org/sid/linux-image-3.12-1-amd64 without the metapackage, then it never will be upgraded, excepted there should be a version 3.12-2. Perhaps I'm wrong ;). However, a there would be no upgrade to 3.13. I'm not sure about the -2 build of the same kernel. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391863769.7009.27.camel@archlinux
Re: How to block kernel updates
On Sat, 2014-02-08 at 07:48 -0500, Tom H wrote: On Sat, Feb 8, 2014 at 5:24 AM, Ralf Mardorf ralf.mard...@alice-dsl.net wrote: On Sat, 2014-02-08 at 10:02 +, Joe wrote: The risk is about having that happen without noticing. Generally, I keep an eye on what sid is updating, but even this long after a release, it's still tens of megabytes a day. I don't check all of them I always read all package names before updating, for each distro I use. For Arch in addition I should read the news on the homepage, but often I don't do it. Newbies are unable to evaluate what package updates could be very risky, so for Debian they should stay with stable and for Arch they always should read the news first. And they never ever should update Ubuntu :D. My parents upgrade their Ubuntu laptops, iPads, and iPhones the way that most non-technical do, when they're prompted to do so. They don't have any problems and there's no way that they'd be interested in checking package names - or understanding these names if they read them. I also had good luck with *buntus, but it's good luck, it could go wrong, I read it all the times on *buntu lists and I definitively disagree regarding to iOS upgrades for my iPad 2. I won the iPad, if I would have bought the iPad, I would be pissed off. And AFAIK it's impossible to downgrade to the last release of iOS that was stable on my iPad. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391864045.7009.31.camel@archlinux
Re: How to block kernel updates
On Sat, 2014-02-08 at 13:54 +0100, Ralf Mardorf wrote: On Sat, 2014-02-08 at 07:48 -0500, Tom H wrote: On Sat, Feb 8, 2014 at 5:24 AM, Ralf Mardorf ralf.mard...@alice-dsl.net wrote: On Sat, 2014-02-08 at 10:02 +, Joe wrote: The risk is about having that happen without noticing. Generally, I keep an eye on what sid is updating, but even this long after a release, it's still tens of megabytes a day. I don't check all of them I always read all package names before updating, for each distro I use. For Arch in addition I should read the news on the homepage, but often I don't do it. Newbies are unable to evaluate what package updates could be very risky, so for Debian they should stay with stable and for Arch they always should read the news first. And they never ever should update Ubuntu :D. My parents upgrade their Ubuntu laptops, iPads, and iPhones the way that most non-technical do, when they're prompted to do so. They don't have any problems and there's no way that they'd be interested in checking package names - or understanding these names if they read them. I also had good luck with *buntus, but it's good luck, it could go wrong, I read it all the times on *buntu lists and I definitively disagree regarding to iOS upgrades for my iPad 2. I won the iPad, if I would have bought the iPad, I would be pissed off. And AFAIK it's impossible to downgrade to the last release of iOS that was stable on my iPad. A little bit Linux related: There was jackd available for the iPad, but when Apple switched from iOS 6 to iOS 7, they changed something and it's impossible to use jackd now and also impossible for the coders to make jackd available for the iPad again. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391864613.7009.34.camel@archlinux
Re: Vertical sync in GNOME 3
On Fri, 7 Feb 2014 18:00:12 + David Glover-Aoki da...@gloveraoki.net wrote: I'm having problems with tearing. When you drag windows around quickly, or play any video, severe vertical tearing is obvious. I have significantly improved, if not solved, the problem. I created the directory /etc/X11/xorg.conf.d (which is not present by default) and created a .conf file inside it containing the following: Section Device Identifier nvidia card Driver nouveau Option GLXVBlank true EndSection The completely solves the tearing problem for dragging windows around, and very nearly solves the problem when playing videos, though they tear a lot less than they used to. -- David Glover-Aoki http://david.gloveraoki.net/contact signature.asc Description: PGP signature
Re: Vertical sync in GNOME 3
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 02/08/2014 08:59 AM, David Glover-Aoki wrote: I have significantly improved, if not solved, the problem. I created the directory /etc/X11/xorg.conf.d (which is not present by default) and created a .conf file inside it containing the following: Section Device Identifier nvidia card Driver nouveau Option GLXVBlank true EndSection The completely solves the tearing problem for dragging windows around, and very nearly solves the problem when playing videos, though they tear a lot less than they used to. would running dpkg-reconfigure xserver-xorg create that file?? - -- Paul Cartwright Registered Linux User #367800 and new counter #561587 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQEcBAEBAgAGBQJS9jtwAAoJEFOC6wwM39g1AKgIAIvgdfyyUkynzI+U8HV0CbDD X55qJ6GYbvhVx1lqfbE5f4QmyHl7XyC6q1Tr8LFRz37sDD2aP+B7Yfo/wlM3X82B BFIUYvYVOp+55659yDufcWn/rwoOAi0O6+YNXEDhyJl9PrUgDBDm7fW0XFGrb7V9 zEFhnsoAeFMOCKvaWtsgNAL0+TrvH0VBOr5DHJGcVnunDjYG74niOJ3LSdmdixCy 7uKzLkn0JEQ3Y8gpE7xmifNU6aCrwkLHGlXevfZ7J8S4h5F2CCxEOpkP6Yg313Xo qnVgDWTE1HsbqRZisau9uVXQbQmvsQllk6ddc49Zt5nWomu24v3DRgYVjMhKWTk= =wgUS -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/52f63b70.1060...@gmail.com
more than 12G of RAM
I'm running Jessie on an AMD64 Gigabyte 970A-D3P board with an FX6100 processor. I had 2x4G DDR3 sticks in it but some of the programs I use were causing excessive thrashing. I added a 1x8G DDR3 stick (got a good price on it, much cheaper than adding 2x4G) which resolved the thrashing problem. The BIOS shows I have 16G but free shows only 12G. I also ran free on a machine with 2x8G DDR3 running Wheezy and it showed 16G when I ran free. This suggests that the kernel is handling 16G (as one would expect) in the general case and the issue is likely due to my setup. Since the BIOS shows the full 16G, the problem doesn't seem to be on the mainboard. Is there an issue with running interleaved and non-interleaved RAM together on the Jessie kernels? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/52f64b51.4000...@torfree.net
what are the names in Debian
Hello, I liket the elegance-colors theme for gnome and as far as I know it it's not avaible for debian, So i try to compile it myself. But it has three dependencies which I cannot find the appropiate name in Debian. gtk3-devel vala glib2-devel Can anyone tell me what the names in Debian are so I can try that theme ? Roelof
Re: what are the names in Debian
On 8 February 2014 16:32, Roelof Wobben rwob...@hotmail.com wrote: Hello, I liket the elegance-colors theme for gnome and as far as I know it it's not avaible for debian, So i try to compile it myself. But it has three dependencies which I cannot find the appropiate name in Debian. gtk3-devel vala glib2-devel Can anyone tell me what the names in Debian are so I can try that theme ? Roelof libgtk-3-dev libglib2.0-dev libvala-$VERSION-dev -- rob -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAOZWb-puhbUsEtr01g-GK=dxw2-lewt9-9lceyzur7cfkak...@mail.gmail.com
Re: How to block kernel updates
On Saturday 08 February 2014 12:29:30 Tom H wrote: On Sat, Feb 8, 2014 at 6:32 AM, Lisi Reisz lisi.re...@gmail.com wrote: On Saturday 08 February 2014 09:40:43 Chris Bannister wrote: AFAIUI, if the package has a different name, as newer releases of kernels do, then APT won't consider it an update, it is just another package. aptitude has just upgraded me automatically from 3.10-x bpo to 3.11-x bpo then to 3.12-0 bpo. I imagine it depends on what it has been told to do: safe-upgrade or full-upgrade. Irrespective of upgrade/safe-upgrade and dist-upgrade/full-upgrade, linux-image won't be bumped up to a later kernel version if you don't have linux-image-arch installed. quote lisi@Tux-II:~$ aptitude show linux-image-amd64 Package: linux-image-amd64 State: installed Automatically installed: no Version: 3.12+55~bpo70+1 Priority: extra Section: kernel Maintainer: Debian Kernel Team debian-ker...@lists.debian.org Architecture: amd64 Uncompressed Size: 6,144 Depends: linux-image-3.12-0.bpo.1-amd64 Conflicts: linux-image-amd64 Provides: linux-latest-modules-3.12-0.bpo.1-amd64 Description: Linux for 64-bit PCs (meta-package) This package depends on the latest Linux kernel and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. This kernel also runs on a Xen hypervisor. It supports both privileged (dom0) and unprivileged (domU) operation. lisi@Tux-II:~$# /quote But recently (maybe a week or two?) I did have the earlier kernels installed, so it must upgrade the linux-image it uses - which surely comes in the end to the same thing? I did not install the metapackage deliberately, in fact I didn't know it was there before this thread. I installed kernel 3.10 from backports, which updated automatically first to to 3.11 and then to 3.12. Had I wanted it not to upgrade, would I have needed to search out the metapackage and remove it? Or hold it, of course. Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201402081655.31085.lisi.re...@gmail.com
Updating not working as expected
Hi, I installed Jessie on a new computer about 2 months ago. I needed Jessie to support my network interface. Since then I noticed that I seeing almost no updates in Synaptic, or when using apt-get. During the same period on my old computer (also running Jessie) see packages almost constantly updating. I did look at a few things on both systems previously and didn't see anything I could recognize as causing the difference. Today however I opened the preferences in Synaptic and changed the preferred distribution from 'Always prefer highest' to 'Prefer versions from Testing'. Low and behold I now have a very large number of updates waiting. But, I don't think I should have to make that change to get normal updates. I'm thinking this has something to do with the repositories, which are different between the 2 computers. Here is my repositories list: deb http://security.debian.org/ jessie/updates main contrib non-free deb-src http://security.debian.org/ jessie/updates non-free contrib main deb http://ftp.us.debian.org/debian/ jessie main non-free contrib deb-src http://ftp.us.debian.org/debian/ jessie main non-free contrib deb http://ftp.us.debian.org/debian/ jessie-updates non-free contrib main deb-src http://ftp.us.debian.org/debian/ jessie-updates non-free contrib main deb http://ftp.us.debian.org/debian/ jessie-backports main contrib non-free deb-src http://ftp.us.debian.org/debian/ jessie-backports main contrib non-free deb http://www.deb-multimedia.org/ jessie main non-free deb http://packages.mate-desktop.org/repo/debian/ jessie main # deb http://linux.dropbox.com/debian/ wheezy main My guess is the behavior I'm seeing is related to either the 'jessie-backports' or 'jessie-updates' repositories, but I don't know why I ended up with them or why I would (or would not) want them. Should I just change them to 'jessie'? Thanks, Jon -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CANcvmg3o_3JwQfswfrRmqyGuW_B+_Wewfn7CF=5m2gpb13g...@mail.gmail.com
USB wireless network adaptor
Hi, I'm having a HP laptop running wheezy. The built-in wireless adaptor wasn't working fine. So bought a Asus usb-n10 wireless adaptor. installed the drivers and it works fine. But once i shutdown or restart my laptop, its not working. The lsusb command shows the wireless adaptor, but the adaptor is not working (not getting detected in network manager in gnome). only way to make it work is to restart. Has anyone faced a similar situation and is there any fix for this issue. Thanks in advance. Regards, Mani
Re: How to block kernel updates
On Sat, 2014-02-08 at 16:55 +, Lisi Reisz wrote: Had I wanted it not to upgrade, would I have needed to search out the metapackage and remove it? Or hold it, of course. No need to hold the package, removing it should be all that's needed. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1391882424.7009.49.camel@archlinux
Re: How to block kernel updates
On Sat, Feb 8, 2014 at 11:55 AM, Lisi Reisz lisi.re...@gmail.com wrote: On Saturday 08 February 2014 12:29:30 Tom H wrote: On Sat, Feb 8, 2014 at 6:32 AM, Lisi Reisz lisi.re...@gmail.com wrote: On Saturday 08 February 2014 09:40:43 Chris Bannister wrote: AFAIUI, if the package has a different name, as newer releases of kernels do, then APT won't consider it an update, it is just another package. aptitude has just upgraded me automatically from 3.10-x bpo to 3.11-x bpo then to 3.12-0 bpo. I imagine it depends on what it has been told to do: safe-upgrade or full-upgrade. Irrespective of upgrade/safe-upgrade and dist-upgrade/full-upgrade, linux-image won't be bumped up to a later kernel version if you don't have linux-image-arch installed. But recently (maybe a week or two?) I did have the earlier kernels installed, so it must upgrade the linux-image it uses - which surely comes in the end to the same thing? I did not install the metapackage deliberately, in fact I didn't know it was there before this thread. I installed kernel 3.10 from backports, which updated automatically first to to 3.11 and then to 3.12. Had I wanted it not to upgrade, would I have needed to search out the metapackage and remove it? Or hold it, of course. What I meant by kernel version was 3.2, 3.10, 3.11, 3.12. So linux-image-am64 in wheezy, wheezy-updates, wheezy/updates, will only pull in minor versions of 3.2. For example the latest upgrade is from 3.2.51-1 to 3.2.54-2. And linux-image-amd64 in wheezy-backports will pull in 3.10, 3.11, 3.12, ... You're given a choic in d-i to install the metapackage or a specific linux-image (perhaps only in expert mode). I'd remove linux-image-amd64 rather than hold it if you don't want your kernel to be upgraded to 3.13 when it becomes available, but I'd check first whether 3.12 will keep on receiving security patches. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAOdo=SzrFFL=e9=miyjr2u8lsxjx+ogb-ylha30psigunqp...@mail.gmail.com
Re: USB wireless network adaptor
On 2/8/14, Manikandan M mani@gmail.com wrote: I'm having a HP laptop running wheezy. The built-in wireless adaptor wasn't working fine. So bought a Asus usb-n10 wireless adaptor. installed the drivers and it works fine. But once i shutdown or restart my laptop, its not working. The lsusb command shows the wireless adaptor, but the adaptor is not working (not getting detected in network manager in gnome). only way to make it work is to restart. Has anyone faced a similar situation and is there any fix for this issue. Thanks in advance. While you're waiting for others with more tech knowledge to chime in, one thought occurs to me. Are you using a persistent name for your [devices]? That's all I know to say to you at this point outside of that it's awesomeness defined. It's where you give your devices a specifically defined name that will always be there regardless of where you plug it into USB, for example. It replaces where you might something like sda1, sdb5, etc. Those change on us all the time depending on how we connect externally via USB. If the concept's new to you, try searching the archives for threads using the word persistent, for example. I'm just not sure myself how to set it up just yet and will be doing the same VERY SOON. :) Hope this helps (someone).. Once mastered, can guarantee it's a major headache AND time saver down the road :) Cindy -- Cindy-Sue Causey Talking Rock, Pickens County, Georgia, USA * runs with duct tape * -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cao1p-kdpcr7o7bm8jy-z+-n3umx5gwuig4-0ugz4mnobh1e...@mail.gmail.com
Re: About to format the whole laptop, need some partitioning advice.
On 02/08/2014 02:21 AM, Anubhav Yadav wrote: Something really bad happened. ... No problem. Part of the FOSS hobby is breaking your toy and then having to fix it. :-) First, looking back on this thread, I see a meta-problem. Please read these (adjust for context): http://www.emailreplies.com/ https://www.freebsd.org/doc/en/articles/freebsd-questions/ http://www.freebsd.org/doc/en/articles/mailing-list-faq/article.html#bikeshed Have you done this? On 02/05/2014 12:11 AM, David Christensen wrote: Most major hard drive manufacturers offer drive diagnostic tools. Download the tool for your brand of HDD and use it to check your drive. (I prefer a stand-alone bootable ISO image that I can burn to CD.) David -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/52f69b17.7090...@holgerdanske.com