Problems with Gnome2
Hi, I finally have gotten a clean install of gnome2 for my unstable dist laptop, and I'm having some strange problems with gnome2 and was wondering if anyone else is having them 1. I have a 1.7 Ghz p4m laptop with 512megs mem. However, gnome feels extreamly sluggish. An example of this would be working in one terminal for an extended period of time and then try to highlight the 5 desktop icons. It will take a noticable amount of time for the icons to be highlighted, and there will be no shadow box appearing showing that area of the desktop I'm trying to highlight. However, if I immediatly try to do the same thing, it appears to work fine and the performance is much better. I am noticing this in several places doing different things. 2. When I try to launch gnome stuff from the menu or from a launcher icon and there is the afore mentioned sluggishness, it causes xmms to pause for a brief period of time. I have had top running during the problems, but there is never a load on my machine. I am hoping that these are problems with gnome or the packaging that will be fixed and not a standard feature. It seems that gnome should just fly on a machine like mine since I have both the memory and the horsepower. Any ideas, thoughts, comments would be appreciated. Thanks, Chris -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Problems with X and unstable
I am in need of some help. It appears that the X packages in the unstable distribution where updated and now I can not get into X. I am attaching the log from trying to run a startx to show what the problem is. Before this happened on Friday, I was running X without a problem on my Dell Inspiron 8200. Any ideas on what has changed would greatly be appreciated. Thanks, Chris X: warning; process set to priority -11 instead of requested priority -10 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.2.1.1 (Debian 4.2.1-6 20030225230350 [EMAIL PROTECTED]) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 18 October 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.20-586tsc i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Fri Feb 28 22:13:57 2003 (==) Using config file: /etc/X11/XF86Config-4 (EE) Failed to load module pex5 (module does not exist, 0) Skipping /usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o: No symbols found (EE) Failed to load module xie (module does not exist, 0) Symbol FontFilePriorityRegisterRenderer from module /usr/X11R6/lib/modules/fonts/libxtt.a is unresolved! (II) [GLX]: Initializing GLX extension This should not happen! An unresolved function was called! Fatal server error: When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED] XIO: fatal IO error 104 (Connection reset by peer) on X server :0.0 after 0 requests (0 known processed) with 0 events remaining.
Re: Problems with X and unstable
On Sun, Mar 02, 2003 at 12:46:16PM -0500 or thereabouts, andyrew wrote: Chris Hoover wrote: (EE) Failed to load module pex5 (module does not exist, 0) Skipping /usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o: No symbols found (EE) Failed to load module xie (module does not exist, 0) Symbol FontFilePriorityRegisterRenderer from module /usr/X11R6/lib/modules/fonts/libxtt.a is unresolved! (II) [GLX]: Initializing GLX extension This should not happen! An unresolved function was called! Fatal server error: If you're managing your /etc/X11/XF86Config-4 with debconf, try: [EMAIL PROTECTED]:]# dpkg-reconfigure xserver-xfree and make sure that [ ] pex5 [ ] xie [ ] glx extensions don't have 'x' in their boxes (you _might_ want to do the same for speedo, too, while you're at it). Do a [EMAIL PROTECTED]:~]$ startx to see if that helped. If your editing /etc/X11/XF86Config-4 yourself, just comment-out those lines (add a '#' to the beginning of the line), and [EMAIL PROTECTED]:]~$ startx Check-out /usr/share/doc/xfree86-common ;-) hth -- ah -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Thanks, that fix worked. However, is this not a bug with the latest unstable packaging? I mean, my X config was working perfect, X packages updated and then my X is broken??? If this is a bug as I think, how do I properly report it? thanks, Chris -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Apt-get/ Dansguardian problem
Berdt van der Lingen wrote: Since I installed dansguardian on my Squid-proxy box I wasn't able to use apt-get properly. When I add the IP address of my debian box to the excluded ip list of Dansguardian apt-get is working fine again. Does anyone know about this problem? I couldn't find any information about it on the web. Btw, I was able to reproduce the problem by installing a fresh debian woody box in VMware. I am getting the following results after apt-get update behind my dansguardian / transparant proxy: debian:/etc/apt# apt-get update Get:1 http://security.debian.org stable/updates/main Packages [437kB] 99% [Waiting for file] [Connecting to security.debian.org (194.109.137.218)] gzip: stdin: not in gzip format Err http://security.debian.org stable/updates/main Packages Sub-process gzip returned an error code (1) Get:2 http://security.debian.org stable/updates/main Release [110B] Get:3 http://http.us.debian.org stable/main Packages [6538kB] 99% [Working] 771kB/s 0s gzip: stdin: not in gzip format Err http://http.us.debian.org stable/main Packages Sub-process gzip returned an error code (1) Get:4 http://http.us.debian.org stable/main Release [96B] Err http://http.us.debian.org stable/main Release Error reading from server - read (104 Connection reset by peer) [IP: 208.185.25.38 80] Get:5 http://http.us.debian.org stable/contrib Packages [163kB] 99% [Working] 771kB/s 0s gzip: stdin: not in gzip format Err http://http.us.debian.org stable/contrib Packages Sub-process gzip returned an error code (1) Get:6 http://http.us.debian.org stable/contrib Release [99B] Get:7 http://http.us.debian.org stable/non-free Packages [220kB] 99% [7 Packages gzip 0] 771kB/s 0s gzip: stdin: not in gzip format Err http://http.us.debian.org stable/non-free Packages Sub-process gzip returned an error code (1) Get:8 http://http.us.debian.org stable/non-free Release [100B] Fetched 7359kB in 23s (314kB/s) Failed to fetch http://http.us.debian.org/debian/dists/stable/main/binary-i386/Packages Sub-process gzip returned an error code (1) Failed to fetch http://http.us.debian.org/debian/dists/stable/main/binary-i386/Release Error reading from server - read (104 Connection reset by peer) [IP: 208.185.25.38 80] Failed to fetch http://http.us.debian.org/debian/dists/stable/contrib/binary-i386/Packag es Sub-process gzip returned an error code (1) Failed to fetch http://http.us.debian.org/debian/dists/stable/non-free/binary-i386/Packa ges Sub-process gzip returned an error code (1) Failed to fetch http://security.debian.org/dists/stable/updates/main/binary-i386/Package s Sub-process gzip returned an error code (1) Reading Package Lists... Done Building Dependency Tree... Done W: Couldn't stat source package list http://http.us.debian.org stable/main Packages (/var/lib/apt/lists/http.us.debian.org_debian_dists_stable_main_binary-i 386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list http://http.us.debian.org stable/contrib Packages (/var/lib/apt/lists/http.us.debian.org_debian_dists_stable_contrib_binar y-i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list http://http.us.debian.org stable/non-free Packages (/var/lib/apt/lists/http.us.debian.org_debian_dists_stable_non-free_bina ry-i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list http://security.debian.org stable/updates/main Packages (/var/lib/apt/lists/security.debian.org_dists_stable_updates_main_binary -i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list http://http.us.debian.org stable/main Packages (/var/lib/apt/lists/http.us.debian.org_debian_dists_stable_main_binary-i 386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list http://http.us.debian.org stable/contrib Packages (/var/lib/apt/lists/http.us.debian.org_debian_dists_stable_contrib_binar y-i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list http://http.us.debian.org stable/non-free Packages (/var/lib/apt/lists/http.us.debian.org_debian_dists_stable_non-free_bina ry-i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list http://security.debian.org stable/updates/main Packages (/var/lib/apt/lists/security.debian.org_dists_stable_updates_main_binary -i386_Packages) - stat (2 No such file or directory) W: You may want to run apt-get update to correct these problems E: Some index files failed to download, they have been ignored, or old ones used instead. When I put the ip address of my debian box in the Dansguardian exceptionlist everything runs fine: debian:/etc/apt# apt-get update Get:1 http://security.debian.org stable/updates/main Packages [96.7kB] Get:2 http://http.us.debian.org stable/main Packages [1777kB] Hit http://security.debian.org stable/updates/main Release Get:3 http://http.us.debian.org stable/main Release [96B] Get:4 http://http.us.debian.org stable/contrib Packages
Package Depedency Problems/Conficts
Please forgive if this is not the proper forum for this posting, but I'm not exactly sure where it should go. There is a dependency problem with wterm. I just tried to install it on my laptop that is running debian unstable with WindowMaker as my windowmanager. However an apt-get install wterm comes back saying that it wants to remove libwraster2 wmaker wmakerconf! How can this be seeing as wterm is a terminal emulator designed for windowmaker? Any help on how to get the two working together, or who to pass this on to would be appreciated. Thanks, Chris -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: wine and IE
Robin Putters wrote: On Tue, 2003-02-18 at 21:43, Matthew Weier O'Phinney wrote: Has anybody on the list gotten IE to work under a normal wine install? Is it possible to get different versions to work under different install directories (this would be IDEAL!)? Would you be willing to give me some pointers? Okay: from somewhere deep down in my memory: - Get a IE5 complete setup from somewhere (I got it of the Office2000 CD's). - run 'wine DCOM98.EXE' (can be found on MS site somewhere) - run 'wine WINSOCK2.EXE' (can also be found on MS site somewhere) - run 'wine IE5SETUP.EXE' and select the typical installation Wine will crash a couple of times, but just keep repeating the last step until it's finally installed. After that, I even ended up with a nice little shortcut on my desktop to IE (with nautilus that is). After that, it's possible to upgrade to IE6. Installing IE6 from scratch is not possible (at least I haven't found out how yet), it gives you an error that it needs at least win98. And, like some other user mentioned here, your fonts will look ugly, but there might be some tweaking possible. I just did it to show someone you can run (some) win32 programs with linux. Have fun! PS: check also appdb.codeweavers.com.. You will find a lot of usefull tips there (and also a lot of outdated ones). Just go to codeweavers.com and purchase a copy of crossover office. This is a version of wine that will run IE, Quicken, Office 2000, etc on linux. It is the same code base as wine, just more advanced. Definetly worth the money and will probably be perfect for you. Chris -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Help with Coldfusion Server
Hello Everyone, I'm trying to get Coldfusion server version 5 to install on my debian system (unstable). However, the install is abending with the following error: /opt/coldfusion/bin/cfexec: error while loading shared libraries: libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory ERROR: Unable to initialize the Cold Fusion settings. ERROR: Aborting installation. Can anyone help me get around this? I really need to get this running on my laptop so I can get some development work done for my job (and I really don't want to have to reinstall with RedHat). Thanks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Problems running Gnome
Hello Everyone, I am having some problems running Gnome. I have just built my new Dell Inspiron 8200 laptop with Debian 3.0 and used the unstable tree for the install of packages. I know that the unstable tree is a moving target, but it has several things that I wanted (such as gnome 2). Well, when I try to launch gnome using gdm, I get the following error in a popup window: --- There was an error starting the GNOME Setting Daemon. Some things, such as themes, sounds, or background settings may not work correctly. The Settings Daemon restarted too many times. The Last error message was: Failed to activate 'OAFIID:GNOME_SettingsDaemon' GNOME will still try to restart the Settings Daemon next time you log in. - When I click ok, I only get the desktop icons. I do not get the panel or anything else. I am able to left and middle click on the background to get the two associated menus. Does anyone know what is going on and what I need to do to fix it and get a working version of gnome2? Thanks Chris -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Is Woody installable at this time????
But I don't think I'm releasing it on my users yet, what do mean by in a state to do a apt-get dist-upgrade? -Jon I want to upgrade that way. However, if the libraries and other main components are not stable, it will totaly hose my system (as far as I know, an apt-get dist-upgrade is unrecoverable w/o a good backup). So, I want to be sure it will be successfull before I try. Thanks
How to setup rsync system to keep copy of packages locally????
Can someone help me and/or point me to a doc that describes how to setup a local debian package mirror using rsync? I have looked at the man page for rsync, but am still clueless as to how to do it. TIA
Is Woody installable at this time????
Is woody/unstable currently in a state to do a apt-get dist-upgrade to? If not, is there a eta on that time frame? Thanks, maillst
Re: How to setup rsync system to keep copy of packages locally????
Ok, I really want to keep a full i386 mirror of the unstable distribution that I will be able to use apt to install the packages from. Thanks, Chris - Original Message - From: Otto Wyss [EMAIL PROTECTED] To: Chris Hoover [EMAIL PROTECTED] Cc: debian-user@lists.debian.org Sent: Wednesday, June 06, 2001 1:38 PM Subject: Re: How to setup rsync system to keep copy of packages locally Can someone help me and/or point me to a doc that describes how to setup a local debian package mirror using rsync? I have looked at the man page for rsync, but am still clueless as to how to do it. Well it depends on want you want. If you want just to mirror a few known packages, the rsync command is enough. Tell what packages you want and anyone can show you the correct syntax. If you want to mirror a distribution you need to get a partial mirror script. A search on the debian-cd list will give you severals or have a look at http://www.problemlos.ch/~otti/;. If you want to build a full debian mirror, go to the mirror page of debian.org. O. Wyss -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Which Kernel should I use????
I'm looking for some help. I need to install a new kernel on my nat machine, but I'm not sure which kernel to go for. I must have a kernel that can run pppoe (for my adsl) and I also need to be able to nat vpn connections (I have a vpn client that I need to use to connect into work). What kernel should I use 2.2.x or 2.4.x (I know 2.2.x has a vpn patch, but what about pppoe. Also, 2.4.x has pppoe, but what about vpn masq)? Also, to accomplish this, will Ihave to add any additional patches?Thanks,Revoohc
Properly Installing Java
I just downloaded the java 1.2.2 files from a blackdown.org mirror. What .debs do I need to install so that it will be properly installed on my woody system? Thanks, chris
Multiple Mail Accounts?????
Hello, I have multiple mail accounts with my isp. How can I setup linux so I can have my 1 login into my linux box and be able to handle all of the accounts? What I really want is to be able to use 1 mail program and be able to see all of the mail I get. Then I would like to have it setup so it sends out mail via the proper account name (or give me the option of choosing the sending address to use). Is this at all possible? If not, are there any other ideas on how to handle this (preferably w/o using multiple linux accounts)? Thanks, Chris
setting up x terminal workstation
Can someone point me to some sites that explain how to get an older computer working as a remote x-term/workstation. Here is what I currently have: 1 486DX/2 50 laptop w/ 20 megs - This has a complete potato install with a working X server. I would like to convert this laptop into a remote X workstation with everything possible (X wise) running off of my local server. How can I do this? Thanks, Chris
Major Network Issues
I'm having major network problems since switching to my new ISP (road runner). I know that the problem is on my side and need some help figuring out what is wrong and how to fix it. Problem 1: I am unable to ping/connect any of my isp's servers (pop/smtp/nntp/etc) from any box on my network other than my ipmasq box. Of course, the ipmasq box has the nic for the rr cable modem in it. Problem 2: Due to problem 1, I can't send e-mail from my lan. I'm using exim. I tried on a reconfig to set the smart host smtp server to the ip address of the smtp server of rr. However, when I tried to send a test message, I recieved the following error: lookup of host 24.93.67.176 failed in smarthost router. Problem 3: I'm running dhcp for my internal network. How can I get machines that are given dhcp address to be dns-able for my lan (not worried about being able to see them from the internet). Please let me know any specific information you might need to help diagnose and solve this problem, and I will try to provide it. Thanks, Chris [EMAIL PROTECTED] __ Do You Yahoo!? Kick off your party with Yahoo! Invites. http://invites.yahoo.com/
Re: Road Runner DNS Problems
On Sat, 10 Jun 2000, Bob Bernstein wrote: On Sat, Jun 10, 2000 at 02:56:07PM -0500, Chris Hoover wrote: internet | | debian-wall (Firewall box) | | Hub---(debian-server - DNS server for the network) | | (Multiple PC's) You have 'debian-wall' set as the default gw route for every machine, and you have 'debian-server' listed as the first nameserver in every /etc/resolv.conf? Yes? Yes, debian-server is in the /etc/resolv.conf of the other machines. In fact, it is given as the only name server. Then does 'nslookup' appear to working correctly on 'debian-server'? Yes it appears to be working fine. Here is it's output. [EMAIL PROTECTED]:~$ nslookup www.bellsouth.net Server: localhost Address: 127.0.0.1 Non-authoritative answer: Name:www.bellsouth.net Address: 205.152.0.46 [EMAIL PROTECTED]:~$ I did directly connect my windows box to the cable modem and looked at the dhcp address. I then added what it said where the dns servers to the named.conf file on debian-server, but still no help. What do you mean? You added forwarders to named.conf? Yes. Here is what I did (showing only relevent part): // generated by named-bootconf.pl options { directory /var/named; forwarders { 24.31.195.64; ##I added this 24.31.195.65; ##and this 167.7.10.131; 205.152.0.20; 205.152.0.5; }; --- I have since rebooted the box. Be aware that for such as pop and smtp hosts you should use FQDN's; stuff like mail and news might not work. They gave me the following names for use when on their network: pop-server, smtp-server, nntp-server. When I need to connect to the mail server from a non-rr site, I have an FQDN. Also, I can connect to the pop server using that. Finally, I forgot to mention that debian-server is running dhcp for my internal network. However, both debian-server and debian-wall have static ip's (don't use dhcp for internal net). TIA, Chris
Road Runner DNS Problems
I'm having some problems with my Road Runner Cable modem and getting the DNS to properly work. Hopefully, someone can help me get this straight. Here is my current setup: internet | | debian-wall (Firewall box) | | Hub---(debian-server - DNS server for the network) | | (Multiple PC's) The problem I'm having is that I'm unable to access pop/smtp/nntp servers that Road runner provides from anywhere on my network except debian-wall. Road Runner is using dhcp to assign me the ip-addr and I have that working. I also have ipmasq working so all of my networked machines can get in and out to the internet. I did directly connect my windows box to the cable modem and looked at the dhcp address. I then added what it said where the dns servers to the named.conf file on debian-server, but still no help. Can someone help me resolve this problem? I've come up with a couple possible solutions: 1. Run DNS on debian-wall. This is possible, but I really don't want any extranous programs running on that box to help prevent holes as I setup my firewall. 2. Get debian-wall to update the dns on debian-server. I have no idea if this is even possible, much less how to implement it. Other/better ideas? Thanks for any and all help, Chris Hoover [EMAIL PROTECTED]
dhcp cable modem (somewhat urgent)
I'm in need of a little help. Tomorrow the cable company is coming to hook up my cable modem (HURRAY). Anyway, I have been told that they (road runner) use dhcp to assign the ip addresses. I know from some pages I have seen that linux will work with road runners dhcp, but I have a different problem. I'm running dhcp on my home network. Question: How do you get the dhcp client on my firewall computer to grab the cable modem address and not an address from my internal dhcp? Thanks for any help, chris -- Your aims are high, and you are capable of much.
Good Imap mail server?
I think I want to install an imap mail server on my linux server. Can someone recommend a good one that is debianized? Here is why I want one. I'm using several different computers on my home network, and want to be able to read my any of my e-mail from any computer here. I believe this is what imap will allow, along with allowing folders to be made on the server. Am I correct? If not, then what do I want? TIA, chris -- Your aims are high, and you are capable of much.
dhcp docs
I'm looking for information on setting up a dhcp server. Does anyone know if a howto or something like that exists? I went to linuxdoc.org and did not see one, but it might be named something else. TIA, chris -- Your aims are high, and you are capable of much.
Outlook Type email/pim
I don't want to cause a flame war or be called a heretic, but after using Microsoft outlook at my new job, I have found I really like some of it's features. I especially like the tight integration it has with all of the features (mail, calander, etc.). Is there an equivelent email type client available for linux? TIA, chris Access your e-mail anywhere, at any time. Get your FREE BellSouth Web Mail account today! http://webmail.bellsouth.net
HELP - Screwed Up Package Listings
HELP - I've royally screwed up my dselect package listing. I was working in dselect to get rid of packages that I never use on my server (games, xemacs, etc) and had a finger slip that removed a required package and exited to the menu. Now almost every package is set to remove. How can I get the packages list rebuilt? If this has to be done manually, is there a way to force apt/dselect to downgrade to slink (the slink cd is in the cd changer on the machine and the machine is currently running potato)? TIA, chris -- Your aims are high, and you are capable of much.
Re: Slink - Frozen = No Internet
There is nothing in the /var/lock after a clean reboot. Also, if I drop back to the old 2.0.36 kernel, the problem clears. This is very perplexing since my other 3 linux boxes are all running the same type of setup (potato/2.2.14). Any other ideas? On Fri, 11 Feb 2000, Eric G . Miller wrote: On Fri, Feb 11, 2000 at 10:30:55AM -0800, Chris HOOVER wrote: HELP, I finally took the plunge and upgraded my linux server from slink to frozen last night. After running apt-get dist-upgrade and moving from 2.0.36 to 2.2.14, I can no longer dial out to the internet. When I try to run pon, syslog reports that /dev/ttyS2 (my modem) is locked. I tried doing another reboot, but that did not clear up the problem. Can someone help me fix this problem. Did you check for a stale lock in /var/lock/ ? If there's one, rm it and retry. -- ++ | Eric G. Milleregm2@jps.net | | GnuPG public key: http://www.jps.net/egm2/gpg.asc | ++ -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Your aims are high, and you are capable of much.
Slink - Frozen = No Internet
HELP, I finally took the plunge and upgraded my linux server from slink to frozen last night. After running apt-get dist-upgrade and moving from 2.0.36 to 2.2.14, I can no longer dial out to the internet. When I try to run pon, syslog reports that /dev/ttyS2 (my modem) is locked. I tried doing another reboot, but that did not clear up the problem. Can someone help me fix this problem. TIA, Chris P.S. Please be sure to reply back to this e-mail account as I'm not sure if the subscription to debian-user went through. __ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com
slink diald problems
Can someone help me with a diald problem? I have a full slink install on my server and was trying to get diald setup on it. I have setup the diald.options file to connect using the pon method. It seems to connect fine, but hangs on makeing the link. Ive attached a syslog output of diald and my diald.options. Can someone help me get this to work. This machine is still running a 2.0.36 kernel. Thanks, chris -- Your aims are high, and you are capable of much. Jan 25 14:11:16 debian-server diald[190]: Running connect (pid = 477). Jan 25 14:11:16 debian-server chat[477]: abort on (BUSY) Jan 25 14:11:16 debian-server chat[477]: abort on (NO CARRIER) Jan 25 14:11:16 debian-server chat[477]: abort on (VOICE) Jan 25 14:11:16 debian-server chat[477]: abort on (NO DIALTONE) Jan 25 14:11:16 debian-server chat[477]: abort on (NO ANSWER) Jan 25 14:11:16 debian-server chat[477]: send (ATZ^M) Jan 25 14:11:16 debian-server chat[477]: expect (OK) Jan 25 14:11:16 debian-server chat[477]: ATZ^M^M Jan 25 14:11:16 debian-server chat[477]: OK Jan 25 14:11:16 debian-server chat[477]: -- got it Jan 25 14:11:16 debian-server chat[477]: send (ATDT2528294^M) Jan 25 14:11:16 debian-server chat[477]: expect (CONNECT) Jan 25 14:11:16 debian-server chat[477]: ^M Jan 25 14:11:44 debian-server chat[477]: ATDT2528294^M^M Jan 25 14:11:44 debian-server chat[477]: CONNECT Jan 25 14:11:44 debian-server chat[477]: -- got it Jan 25 14:11:44 debian-server chat[477]: send (^M) Jan 25 14:11:44 debian-server chat[477]: expect (name:) Jan 25 14:11:44 debian-server chat[477]: 32000 V42bis^M Jan 25 14:11:44 debian-server chat[477]: ^M Jan 25 14:11:44 debian-server chat[477]: NAS08CAE line 84 ^M Jan 25 14:11:44 debian-server chat[477]: ^M Jan 25 14:11:44 debian-server chat[477]: ^M Jan 25 14:11:44 debian-server chat[477]: User Access Verification^M Jan 25 14:11:44 debian-server chat[477]: ^M Jan 25 14:11:44 debian-server chat[477]: Username: Jan 25 14:11:44 debian-server chat[477]: -- got it Jan 25 14:11:44 debian-server chat[477]: send (??) Jan 25 14:11:46 debian-server chat[477]: expect (ssword:) Jan 25 14:11:46 debian-server chat[477]: wax_man^M Jan 25 14:11:46 debian-server chat[477]: Password: Jan 25 14:11:46 debian-server chat[477]: -- got it Jan 25 14:11:46 debian-server chat[477]: send (??) Jan 25 14:11:46 debian-server chat[477]: send (\d) Jan 25 14:11:47 debian-server diald[190]: Running pppd (pid = 480). Jan 25 14:11:47 debian-server diald[480]: Running pppd: /usr/sbin/pppd -detach modem crtscts mtu 1500 mru 1500 netmask 255.255.255.0 Jan 25 14:11:47 debian-server pppd[480]: pppd 2.3.5 started by root, uid 0 Jan 25 14:11:47 debian-server pppd[480]: Using interface ppp0 Jan 25 14:11:47 debian-server pppd[480]: Connect: ppp0 -- /dev/ttyS2 Jan 25 14:12:17 debian-server pppd[480]: Connection terminated. Jan 25 14:12:18 debian-server pppd[480]: Exit. Jan 25 14:12:20 debian-server diald[190]: Delaying 30 seconds before clear to dial. # /etc/diald/diald.options # # $Id: diald.options,v 1.19 1998/08/10 06:27:44 phil Exp $ # # Sample diald.options -- works for PPP links and fixed IP # # Edit to match your set up. # # This is the port the modem is connected to. # *** MODIFY to match your set up *** # See the file /usr/doc/diald/debian.device.gz for discussion about # the use of /dev/ttyS? instead of /dev/cua?. ##device /dev/ttyS1 device /dev/modem # diald log file: do not change. accounting-log /var/log/diald.log # diald monitoring pipe: do not change. fifo /var/run/diald.fifo # This turns on full debugging. #debug 31 # We have PPP mode ppp # IP number for debian-server.foo.bar local 192.168.0.1 # IP number for the provider's machine. This is different each time we connect. # This is not a problem, but it'll make the routine table look funny. remote 192.168.0.2 netmask 255.255.255.0 # If the connection gets broken from the ISP, redial only # if there's outgoing traffic from our side. two-way # When the link's up, change routes to point to the real link # instead of the proxy. reroute # diald should set a default route to the proxy SLIP link. defaultroute # These two scripts must be executable. #ip-up /etc/diald/ip-up #ip-down /etc/diald/ip-down # Scripts used to bring up/shut down the serial line. connect chat -v -f /etc/chatscripts/provider ##connect /etc/diald/connect ##disconnect /etc/ppp/ppp-disconnect # Do UUCP locking. lock # We connect through a modem. modem crtscts # Local tweaking connect-timeout 90 dial-fail-limit 2 died-retry-count 0 # Dutch PTT timetable: same charge for 2.5 (peak) 5 (night) minutes. #impulse 280,20 #restrict 08:00:00 18:00:00 1-5 * * #impulse 130,20 include /etc/diald/standard.filter
Alan Cox's Portaloo
Sorry to be some what off topic, but does anyone know where the cvs archive for Alan Cox's Portaloo is? TIA, chris
2.2.x modules
Is there a good document on how to setup a 2.2.x kernel to use modules? I went to the ldp home page, but the only kernel modules howto I saw was dated from 1997. Thanks, chris
quake2 installation help
I need help getting quake2 to install on potato. when I use the quake2/quake2-bin packages, I get errors (see below). Is there a doc that details how to get it installed with debian (preferably using the deb packages)? I really want to start playing quake2 again. Thanks, chris errors: When I try to install quake2-bin, I get the following messages: Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: Sorry, but the following packages have unmet dependencies: quake2-bin: Depends: libgl1 but it is not installable E: Sorry, broken packages When I try to install quake2 I get these errors: Setting up quake2 (3.20-4) ... ln: cannot create symbolic link `/usr/lib/games/quake2/opengl32' to `/usr/lib/libGL.so.1': No such file or directory dpkg: error processing quake2 (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: quake2 E: Sub-process returned an error code (1)
Installing Quake2 with potato
I'm trying to get quake 2 to install. However there seems to be some packages missing. When I try to install quake2-bin, I get the following messages: Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: Sorry, but the following packages have unmet dependencies: quake2-bin: Depends: libgl1 but it is not installable E: Sorry, broken packages When I try to install quake2 I get these errors: Setting up quake2 (3.20-4) ... ln: cannot create symbolic link `/usr/lib/games/quake2/opengl32' to `/usr/lib/libGL.so.1': No such file or directory dpkg: error processing quake2 (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: quake2 E: Sub-process returned an error code (1) What do I need to do differently to get quake2 installed? thanks, chris
OT: Need Good HTML/Javascript Book
Sorry for a some what off topic posting, but I have a friend who is looking for a good book(s) that cover html and javascript. Since I'm not up on books in this area, I was wondering if maybe one of you could suggest a couple good ones. Thanks, chris -- The Government just announced today the creation of the Neutron Bomb II. Similar to the Neutron Bomb, the Neutron Bomb II not only kills people and leaves buildings standing, but also does a little light housekeeping.
MAKEDEV
I'm having problems with MAKEDEV. It will not create the devices for my scsi tape. In fact, it won't seem to create any devices. I've tried running it with scsi, st, nst, etc, and it does not seem to do anything. Is there a problem with the slink ver? If not, how am I supposed to run it to create the devices I need? Thanks, chris -- A fool must now and then be right by chance.
kde problems
When I run kde as a normal user and change the panel settings, it is not saving them. Is there a way to kde to remember the changes I make the next time I login? Thanks, chris -- Where there's a will, there's an Inheritance Tax.
GMT ntp servers
Does anyone know the ip's of some ntp servers that are on gmt? I'm trying to get my computer time correctly set to gmt so it will display the correct time. thanks, chris
vmware
I'm starting to use vmware, and I love it. However, I can only get 16 colors with it. Does anyone know how to get the color depth to increase (win98)? I'm running it on an amd k6-2 300 with a creative labs RIVATNT card (which it does not seem to see). It tells me that I have a Standard Display Adapter (VGA). When I d/l'd the tnt drivers, it warned me that they were not designed for this adapter. Thanks, chris
win98 and samba
Is there anything special I have to setup to allow win98 to access my samba shares? It keeps failing to authenticate my password. I tried turning on encrypted passwords, but that did not seem to work. The encrypted passwords gave me the no permission to access resource error. This was all working fine under win95. Thanks, chris ([EMAIL PROTECTED])
Samba Problems
I've had samba working on my network, allowing my nt box to see my unix home directories. However, I had to reorganize my NT box (server) and ended up reinstalling to free up a hd. When I did this, I changed the domain from PRI_NT_DOMAIN to WINDOWS. I changed the appropriate line in the /etc/smb.conf, but I'm unable to connect from winnt. I get the following error when I try: \\Debian2 is not accessible. Network path not found. Does anyone know how to fix this, and/or what it means? It seems to make no since since debian2 is showing up in the neighorhood network. Thanks, chris
KDE mail client problems
I'm having problems getting KDE's mail client to delete mail that are in folders. I currently have my system set up to sort my mail using exim's filtering capablity. All of the filtered mail goes into various folders in my ~/Mail dir. KDE see's the files with the mail fine, and I'm able to read the mail, and supposedly delete the mail. However, when I close the mail client, and restart it, the mail is still there. So does anyone know how to make the mail client really delete the mail? Thanks, chris
getting kde
does anyone know of a http site that I can get debian debs of kde 1.1.1 from? thanks, chris
Sound Card Config/Kernel Compile Problems
I'm having some problems with my yamaha pci sound card that I just installed. After reading the kernel documentation, I compiled in every thing it said to for the olp3-sa stuff. However, on the reboot of my system, it looks like some of the sound card parameters are wrong, and I'm not sure what they should be. Here is what the kernel said: OSS: OPL3-SA chip not found Found OPL3-SAx (YMF719) MSS: I/O port conflict Sound initialization complete Alright, the kernel found my card and called thinks it's a YMF719, although it really is a YMF724E-V. Anyway, how can I tell what the MSS i/o port should be? Here is some other information I've found while snooping around the proc dir. /proc/sound: OSS/Free:3.8s2++-971130 Load type: Driver compiled into kernel Kernel: Linux debian 2.3.1 #2 Sun May 23 23:48:52 EST 1999 i586 Config options: 0 Installed drivers: Type 10: MS Sound System Type 27: Compaq Deskpro XL Type 42: OPL3SA2 Type 43: OPL3SA2 MIDI Type 1: OPL-2/OPL-3 FM Type 5: Roland MPU-401 Type 26: MPU-401 (UART) Type 38: Yamaha OPL3-SA Type 40: OPL3-SA MIDI Type 36: SoftOSS Virtual Wave Table Card config: (Yamaha OPL3-SA at 0x530 irq 11 drq 0,3) (OPL3-SA MIDI at 0x330 irq 9 drq 0) SoftOSS Virtual Wave Table (OPL3SA2 MIDI at 0x330 irq 9 drq 0) OPL3SA2 at 0x530 irq 9 drq 0,1 (Compaq Deskpro XL at 0x530 irq 11 drq 3) (Roland MPU-401 at 0x330 irq 9 drq 0) (OPL-2/OPL-3 FM at 0x388 drq 0) Audio devices: Synth devices: 0: SoftOSS Midi devices: Timers: 0: System clock 1: SoftOSS Mixers: /proc/pci: PCI devices found: Bus 0, device 0, function 0: Host bridge: VIA Technologies VT 82C585 Apollo VP1/VPX (rev 35). Medium devsel. Fast back-to-back capable. Master Capable. Latency=32. Bus 0, device 7, function 0: ISA bridge: VIA Technologies VT 82C586 Apollo ISA (rev 39). Medium devsel. Master Capable. No bursts. Bus 0, device 7, function 1: IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 6). Medium devsel. Fast back-to-back capable. Master Capable. Latency=32. I/O at 0x6000 [0x6001]. Bus 0, device 8, function 0: Multimedia audio controller: Unknown vendor Unknown device (rev 5). Vendor id=1073. Device id=4. Medium devsel. IRQ 11. Master Capable. Latency=32. Min Gnt=5.Max Lat=25. Non-prefetchable 32 bit memory at 0xe200 [0xe200]. Bus 0, device 10, function 0: Ethernet controller: 3Com 3C595 100bTX (rev 0). Medium devsel. IRQ 10. Master Capable. Latency=248. Min Gnt=3.Max Lat=8. I/O at 0x6200 [0x6201]. Bus 0, device 11, function 0: VGA compatible controller: NVidia Unknown device (rev 4). Vendor id=10de. Device id=20. Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. Latency=32. Min Gnt=5.Max Lat=1. Non-prefetchable 32 bit memory at 0xe000 [0xe000]. Prefetchable 32 bit memory at 0xe100 [0xe108]. Thanks for any help you can provide. Chris
Wierd PPP Problems
I'm having some strange problems with ppp on my dial out server. Everything has been working fine for quite some time (over 51 days of uptime on 2.2.2), and then tonight I started having problems connecting. Does anyone know what is going on, and how to fix it? May 11 22:01:46 debian2 diald[138]: Running pppd (pid = 4673). May 11 22:01:46 debian2 diald[4673]: Running pppd: /usr/sbin/pppd -detach modem crtscts mtu 1500 mru 1500 netmask 255.255.255.0 noauth May 11 22:01:47 debian2 pppd[4673]: pppd 2.3.5 started by root, uid 0 May 11 22:01:47 debian2 pppd[4673]: Using interface ppp0 May 11 22:01:47 debian2 pppd[4673]: Connect: ppp0 -- /dev/ttyS2 May 11 22:02:17 debian2 pppd[4673]: LCP: timeout sending Config-Requests May 11 22:02:17 debian2 pppd[4673]: Connection terminated. May 11 22:02:17 debian2 pppd[4673]: Receive serial link is not 8-bit clean: May 11 22:02:17 debian2 pppd[4673]: Problem: all had bit 7 set to 0 May 11 22:02:18 debian2 pppd[4673]: Hangup (SIGHUP) May 11 22:02:18 debian2 pppd[4673]: Exit. May 11 22:02:20 debian2 modprobe: can't locate module net-pf-5 May 11 22:02:21 debian2 diald[138]: Nonzero exit status (7) on command '/sbin/route add 192.168.0.2 metric 1 dev sl0' May 11 22:02:21 debian2 diald[138]: Nonzero exit status (7) on command '/sbin/route add default metric 1 netmask 0.0.0.0 dev s l0' May 11 22:02:26 debian2 modprobe: can't locate module net-pf-5 May 11 22:02:27 debian2 diald[138]: Nonzero exit status (7) on command '/sbin/route add 192.168.0.2 metric 1 dev sl0' May 11 22:02:28 debian2 diald[138]: Nonzero exit status (7) on command '/sbin/route add default metric 1 netmask 0.0.0.0 dev s l0' May 11 22:02:29 debian2 diald[138]: Delaying 30 seconds before clear to dial. TIA, Chris -- E-Mail: Chris Hoover [EMAIL PROTECTED] Date: 11-May-99 Time: 22:47:23 This message was sent by XFMail --
Looking for Mail Information
I've decided that I'm going to try and write an e-mail program for X, since I have not been able to find a good one yet. However, I'm not sure what to do. Does anyone know of some good site that document how and/or what a mail client should handle and do? TIA, Chris -- E-Mail: Chris Hoover [EMAIL PROTECTED] Date: 10-May-99 Time: 22:29:13 This message was sent by XFMail --
Setting Up Netscape Mail
I guess I'm going to have to use the mail program in Netscape, since I can't find any other descent X mail programs. However, I'm not sure how to set it up. I have exim filters running that are sorting all of my mail into the appropriate folders. I've set it up so that no mail should be left in the /var/spool/mail folders. So, do I need to still tell Netscape to use the movemail program? If so, what is the best way to set it up. If not, what should I tell the system to use for the incoming mail? Thanks, Chris
Exim Filter
Hello all, I'm working on setting up my exim filter to filter all my mail and have run into a couple of questions for which I have not found an answer. 1. Is it possible to have the filter check all incoming fields w/o specifically spelling them out? (something similar to procmails ^TO) 2. How can I have exim dump any mail that passes through all my filters into a special misc folder? I don't want any mail to end up in my /var/spool/mail/user file. Thanks, Chris -- E-Mail: Chris Hoover [EMAIL PROTECTED] Date: 26-Apr-99 Time: 21:41:38 This message was sent by XFMail --
Fw: Mail delivery failed: returning message to sender
First off, let me say thanks to those of you who replied to my other posting about my mail system being hosed. I ended up having to reinstall since it looked more an more like the first install did not go well. After that I applied what you guys said and I now have a working email system. However, there is still one kink. When I just tried to email myself, it was bounced back by exim. How can I prevent this? Below is the bouned email message. Thanks, chris On Sun, 11 Apr 1999 00:08:42 Mail Delivery System wrote: This message was created automatically by mail delivery software. A message that you sent could not be delivered to all of its recipients. The following address(es) failed: [EMAIL PROTECTED]: unknown local-part wax_man in domain bellsouth.net -- This is a copy of the message, including all the headers. -- Return-path: [EMAIL PROTECTED] Received: from choover by debian.foo.bar with local (Exim 2.05 #1 (Debian)) id 10WCU6-00089B-00; Sun, 11 Apr 1999 00:08:42 -0500 Date: Sun, 11 Apr 1999 00:08:42 -0500 From: Chris Hoover [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: test test test test test Message-ID: [EMAIL PROTECTED] Reply-To: Chris Hoover [EMAIL PROTECTED] Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: x-unknown X-Mailer: Balsa 0.4.9 Sender: Chris Hoover [EMAIL PROTECTED] test test test abcdefg this is a test
Windows NT Samba
I was wondering if it was possible to use samba and have my linux box be able to read/write on my NT box. I would like to do this since my NT box has more hd space right now, and I'm in need of a place to store my mp3's. Thanks, chris
Re: URL for gnome staging area?
deb http://www.debian.org/~jim/debian-gtk-gnome/gnome-stage-slink unstable main On Sun, 11 Apr 1999 00:20:27 Ian Keith Setford wrote: What is the URL for the Gnome staging area? I am going to give it a try after years with AfterStep. TIA. -Ian __ Ian Setford [EMAIL PROTECTED] PGP = F2 92 50 E3 CD D7 A2 D9 C4 CE 08 A6 98 E0 0F 58 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
2 Questions
I have two hopefully quick questions. 1. How can I get my machine to automatically start fetchmail after a reboot? Also, how do I have it ran by a user other than root (it is only setup to run as me right now)? 2. Is there a way to script the startup of a remote program? I want to have wmmon and wmppp start up every time I log into my machine. However they are located on my other linux box. Thanks, Chris
/dev/nst0 hosed
Somehow my /dev/nst0 device has become messed up. Could someone please tell me what it should be? Also, how do I use /dev/MAKEDEV to recreate it. Thanks, chris
Printing from Netscape
I'm having problems printing from Netscape. When I try to print, all I get is either a blank page or a page that has the following printed on it: Error: /invalidfont in findfont Operand stack: F0 Times-Roman Font Times I'm trying to print to a remote printer running on another linux box. Printing from other sources like xemacs, mail, command line lp commnds, etc. work fine. Also, printing via samba from my NT box works fine. Any ideas why this is happening? This is the same sort of error I was getting when I was trying to use true type fonts. However, since then, I have done a clean install of slink from cd, and am not using the true type fonts. How do I fix this? Thanks, chris
Mail system all f*cked up
Well, after doing a clean install of Slink from cd's, it appears that the mail system is not working. Last night, I did a clean install of slink, and setup fetchmail and exim and tested them. Fetchmail pulled down my mail, and eventually exim delivered it (over an hour later). Well, today I ran them for real (told fetchmail to fetchall instead of keep). Fetchmail worked fine, but the mail has never been delivered. I can see it sitting in my /var/spool/exim/incoming dir, but exim won't deliver it. Now it has been close to 3 hours since the initial run. Also, I went to send this message out from tkrat and was given this error: 550 relaying to debian-user@lists.debian.org prohibited by administrator. What the hell is going on, and how do I fix it. I desperatily need to get my e-mail system working again. Thanks, Chris P.S. I'm attaching my /etc/exim.conf Access your e-mail anywhere, at any time. Get your FREE BellSouth Web Mail account today! http://webmail.bellsouth.net exim.conf Description: Binary data
Re:RE: Mail system all fouled up
exim is running from inet.d and is being ran as exim -bs. Chris At Sat, 10 Apr 1999 18:02:40 - (UTC), you wrote: On 10-Apr-99 Chris Hoover wrote: Well, after doing a clean install of Slink from cd's, it appears that the mail system is not working. Last night, I did a clean install of slink, and setup fetchmail and exim and tested them. Fetchmail pulled down my mail, and eventually exim delivered it (over an hour later). Well, today I ran them for real (told fetchmail to fetchall instead of keep). Fetchmail worked fine, but the mail has never been delivered. I can see it sitting in my /var/spool/exim/incoming dir, but exim won't deliver it. Now it has been close to 3 hours since the initial run. Also, I went to send this message out from tkrat and was given this error: 550 relaying to debian-user@lists.debian.org prohibited by administrator. What the hell is going on, and how do I fix it. I desperatily need to get my e-mail system working again. Have you tried the command 'exim -bt -M mail-id-number' ? To get these numbers, do a 'exim -bp' Also, do 'ps ax' and find out from the exim entry how often Exim is delivering mail. -- Andrew [PGP5.0 Key ID 0x5EE61C37] -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null Access your e-mail anywhere, at any time. Get your FREE BellSouth Web Mail account today! http://webmail.bellsouth.net
Re:RE: Mail system all fouled up
Andrew, Here is the exim.conf file. Please take a look and let me know if you see anything out of the ordinary. Thanks for the help,] chris # This is the main exim configuration file. # It was originally generated by `eximconfig', part of the exim package # distributed with Debian, but it may edited by the mail system administrator. # This file originally generated by eximconfig at Fri Apr 9 20:06:46 EST 1999 # See exim info section for details of the things that can be configured here. # Please see the manual for a complete list # of all the runtime configuration options that can be included in a # configuration file. # This file is divided into several parts, all but the last of which are # terminated by a line containing the word end. The parts must appear # in the correct order, and all must be present (even if some of them are # in fact empty). Blank lines, and lines starting with # are ignored. ## #MAIN CONFIGURATION SETTINGS # ## smtp_accept_queue_per_connection = 0 # Specify the domain you want to be added to all unqualified addresses # here. Unqualified addresses are accepted only from local callers by # default. See the receiver_unqualified_{hosts,nets} options if you want # to permit unqualified addresses from remote sources. If this option is # not set, the primary_hostname value is used for qualification. qualify_domain = bellsouth.net # If you want unqualified recipient addresses to be qualified with a different # domain to unqualified sender addresses, specify the recipient domain here. # If this option is not set, the qualify_domain value is used. # qualify_recipient = # Specify your local domains as a colon-separated list here. If this option # is not set (i.e. not mentioned in the configuration file), the # qualify_recipient value is used as the only local domain. If you do not want # to do any local deliveries, uncomment the following line, but do not supply # any data for it. This sets local_domains to an empty string, which is not # the same as not mentioning it at all. An empty string specifies that there # are no local domains; not setting it at all causes the default value (the # setting of qualify_recipient) to be used. local_domains = bellsouth.net:localhost # Allow mail addressed to our hostname, or to our IP address. local_domains_include_host = true local_domains_include_host_literals = true # Domains we relay for; that is domains that aren't considered local but we # accept mail for them. #relay_domains = # If this is uncommented, we accept and relay mail for all domains we are # in the DNS as an MX for. #relay_domains_include_local_mx = true # No local deliveries will ever be run under the uids of these users (a colon- # separated list). An attempt to do so gets changed so that it runs under the # uid of nobody instead. This is a paranoic safety catch. Note the default # setting means you cannot deliver mail addressed to root as if it were a # normal user. This isn't usually a problem, as most sites have an alias for # root that redirects such mail to a human administrator. never_users = root # The setting below causes Exim to do a reverse DNS lookup on all incoming # IP calls, in order to get the true host name. If you feel this is too # expensive, you can specify the networks for which a lookup is done, or # remove the setting entirely. host_lookup_nets = 0.0.0.0/0 # Exim contains support for the Realtime Blocking List (RBL) that is being # maintained as part of the DNS. See http://maps.vix.com/rbl/ for background. # Uncommenting the following line will make Exim reject mail from any # host whose IP address is blacklisted in the RBL at maps.vix.com. #rbl_domains = rbl.maps.vix.com #rbl_reject_recipients = false #rbl_warn_header = true # The setting below locks out the use of your host as a mail relay by any # other host. See the section of the manual entitled Control of relaying # for more info. sender_host_reject_relay = * # If you want Exim to support the percent hack for all your local domains, # uncomment the following line. This is the feature by which mail addressed # to [EMAIL PROTECTED] (where z is one of your local domains) is locally rerouted to # [EMAIL PROTECTED] and sent on. Otherwise x%y is treated as an ordinary local part. # percent_hack_domains=* # If this option is set, then any process that is running as one of the # listed users may pass a message to Exim and specify the sender's # address using the -f command line option, without Exim's adding a # Sender header. trusted_users = mail # If this option is true, the SMTP command VRFY is supported on incoming # SMTP connections; otherwise it is not. smtp_verify = false # Some operating systems use the gecos field in the system password file # to hold other information in addition to users'
Slink mail
I just did a minor upgrade of my system to slink (I had done a major upgrade before it was officially released), and am now having problems with mail. Everytime runq or in.smtpd run, they are going balistic, and taking up all of my processor (causing loads 2 or 3). Does anyone know what is going on and/or how to fix it? Everything was running perfectly until I did that minor upgrade yesturday (and I'm not sure what all was upgraded). Thanks, chris
CD-R/RW Question
I'm looking at purchasing a cd-r /cd-rw in the near future, and was looking for some advice as to what to purchase. My main linux box has both ide and scsi in it, so I can go either way. I was wondering if there were advantages to going either with scsi or ide. I'm looking more at ease of operating and installing under linux, not the inherent advantages/disadvantages of ide vs scsi. Also, does linux handle the cd-rw's? If so, are they worth the extra money to get? TIA, chris Access your e-mail anywhere, at any time. Get your FREE BellSouth Web Mail account today! http://webmail.bellsouth.net
diald and ip address
I was wondering what file I should modify so that diald will email me my ip address when it goes on line? I've tried adding it to the /etc/diald/ip-up file (I believe that is where it is, but I'm not at my machine right now), and it did not work. Is there another file I can modify so it will do this? Thanks, Chris lsouth.net
Re: Auto Login at Boot?
Setup diald, then you don't have to worry about starting up ppp. It will do it anytime you try to access the net. Chris Lance Hoffmeyer wrote: IN trying to find out if there was a way to automatically login during boot or to login to different terminals at boot I ran across this program. Not being a C programmer I don't really understand what is happening in this program. It looks as if a password can be accepted as an argument but in the example there is no password mentioned dboot tty userid command Can this be used to auto login under numerous terminal under different user id's and passwords. i.e. dboot tty userid password command I usually keep three terminal open. One as root, one as user under a command shell and one as user under an X terminal. I use root because I haven't found out which files I need to give user rights to in order to PPP. /* dboot.c - program for inittab to execute and start processes. Arguments are: tty to use for console program to run (most likely login) [any program args] example: c1:respawn:/usr/local/bin/dboot tty1 login -f sysadmin will startup user 'sysadmin' on console 1 By Dave Bennet, from Linux Journal Issue 33 January 1997 o Modified by Jeremy Impson, to take one more argument, a uid that will be changed to. It is optional, assuming that the userid doesn't start with a '/', and assuming that the command does. July 10, 1997 usage is now /* dboot.c - program for inittab to execute and start processes. Arguments are: tty to use for console program to run (most likely login) [any program args] example: c1:respawn:/usr/local/bin/dboot tty1 login -f sysadmin will startup user 'sysadmin' on console 1 By Dave Bennet, from Linux Journal Issue 33 January 1997 o Modified by Jeremy Impson, to take one more argument, a uid that will be changed to. It is optional, assuming that the userid doesn't start with a '/', and assuming that the command does. July 10, 1997 usage is now dboot tty userid command -or- dboot tty command Also, added syslogging facility. Jul 10, 1997 */ #include stdlib.h #include string.h #include sys/types.h #include sys/stat.h #include fcntl.h #include errno.h #include unistd.h #include pwd.h #include syslog.h int main(int argc, char **argv) { charcdev[50]; charbuf[50]; int fd, whicharg; pid_t pid; struct passwd *pw_ptr; openlog(dboot, LOG_PID, LOG_USER); if ( argv[2][0] == '/') { whicharg = 2; } else { whicharg = 3; } strcpy(cdev,/dev/); strcat(cdev,argv[1]); /* console device */ if (-1 == (fd = open(cdev, O_RDWR))) { syslog(LOG_ERR,open failure\n); /* perror(open failure); */ exit(0); } close(0); if (-1 == (dup(fd))) { syslog(LOG_ERR,dup 0 failure\n); /* perror(dup 0 failure); */ exit(0); } close(1); if (-1 == (dup(fd))) { syslog(LOG_ERR,dup 1 failure\n); /* perror(dup 1 failure); */ exit(0); } close(2); if (-1 == (dup(fd))) { syslog(LOG_ERR,dup 2 failure\n); /* perror(dup 2 failure); */ exit(0); } if (3 == whicharg) { if (NULL == (pw_ptr = getpwnam(argv[2]))) { syslog(LOG_ERR,no pwent for %s\n,argv[2]); /* sprintf(buf,no pwent for %s,argv[2]); perror(buf); */ exit(0); } if (-1 == setuid(pw_ptr-pw_uid)) { syslog(LOG_ERR,setuid failure\n); perror(setuid failure); exit(0); } } closelog(); if (-1 == execvp(argv[whicharg], argv[whicharg])) { syslog(LOG_ERR,execvp failure\n); /* perror(execvp failure); */ exit(0); } } /* end of main */ -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: fetchmail problem
Andrew, I believe you can put set daemon 600 in your .fetchmailrc, and it will do the same thing. Chris Pollywog wrote: I am having a problem with Fetchmail. I can get mail if I connect to the Internet and then use the command 'fetchmail', but when I was using OpenLinux, I just put: /usr/local/bin/fetchmail -d 600 in my /etc/ppp/ip-up and I could get my mail whenever I went online with diald. I am unable to do that now and need to enter the command manually. Is there a way to do in Debian what I did in OpenLinux? thanks -- Andrew -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Auto Login at Boot?
Lance Hoffmeyer wrote: I usually keep three terminal open. One as root, one as user under a command shell and one as user under an X terminal. I use root because I haven't found out which files I need to give user rights to in order to PPP. Lance, If I remember correctly, the faq-o-matic on the debian home page, lists the steps to go through to modify ppp so users other than root can start it. (assuming you don't want diald). Chris
System Load
I'm a little concerned about my system load. Top is registering a load average of 1.35 1.24 1.01, but my system is more than 90%. How can this be? There is no disk activity, and lots of free memory. I'm running 2.2.1. This is the first time I've noticed it, and am not doing anything out of the ordinary. Chris
tkrat problems
I'm trying to get tkrat (and the rest of my mail system) setup for mail. Right now I'm using netscape mail, and really want to quit using it. Anyway, my email address is [EMAIL PROTECTED] and my linux login in choover. I've setup fetchmail to pull down my mail, and that seems to be working. However, when I try to send mail with tkrat, I get the following error: 550 '[EMAIL PROTECTED]' wax_man@(nodomain) not matched: (ERR_100) unknown user. Does anyone know how to fix this error? I've tried adding [EMAIL PROTECTED] to the Use from address: field under the sending preferences. I've put bellsouth.net in the Masquerade host as: field on the same screen, and put bellsouth.net in the Domain: field. None of these have fixed the problem. TIA, Chris
Modem Commands
Does anyone know the command to tell a modem to turn the sound off? Also, is there a page somewhere that lists the hayes/at modem commands? I've been looking for one, but no luck so far. Thanks, Chris
Netscape Fonts
Somehow, my fonts in Netscape have become all messed up. Could someone be so kind as to tell me what the original fonts where? Thanks, Chris
System Freaking out
I'm kind of at a loss as to what is going on with my system. I am running a slink/potatoe machine with 2.2.1. I was playing x11amp off of my cd changer (scsi) when I had a hard lockup (still a mystery as to why, but something with the changer). Anyway, this is not the first time for a lock up, but it had been almost 7 days. Anyway, I sync'd and unmounted my drives (with the sysrq stuff), and the system rebooted. Now, wmmount is segfaulting, x11amp won't run, fonts seem to be missing etc. Any idea on what to look for or what the problem might be? There is nothing in the logs about the lock up. Tia, chris
Ejecting scsi tape
Is there a way to have my system automatically eject a tape from my scsi tape drive? I'm wanting to add this to my backup script, so I don't forget to change to tape and overwrite a backup. thanks
2.2.X Printing
I'm having problems getting my printer to work with the 2.2.x kernels. I've added the parport stuff into the kernel and my lilo.conf, but still no go. Here is what I've done so far: Kernel config: CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PRINTER=y CONFIG_PRINTER_READBACK=y Lilo.conf: ... append=parport=auto lp=parport0 ... /etc/printcap: ascii|lp0|cdeskjet-letter-ascii-mono|cdeskjet ascii mono:\ :lp=/dev/lp0:\ :sd=/var/spool/lpd/cdeskjet-letter-ascii-mono:\ :lf=/var/spool/lpd/cdeskjet-letter-ascii-mono/log:\ :af=/var/spool/lpd/cdeskjet-letter-ascii-mono/acct:\ :if=/usr/lib/apsfilter/filter/aps-cdeskjet-letter-ascii-mono:\ :mx#0:\ :sh: # lp|lp2|cdeskjet-letter-auto-mono|cdeskjet auto mono:\ :lp=/dev/lp0:\ :sd=/var/spool/lpd/cdeskjet-letter-auto-mono:\ :lf=/var/spool/lpd/cdeskjet-letter-auto-mono/log:\ :af=/var/spool/lpd/cdeskjet-letter-auto-mono/acct:\ :if=/usr/lib/apsfilter/filter/aps-cdeskjet-letter-auto-mono:\ :mx#0:\ :sh: # lp3|cdeskjet-letter-ascii-color|cdeskjet ascii color:\ :lp=/dev/lp0:\ :sd=/var/spool/lpd/cdeskjet-letter-ascii-color:\ :lf=/var/spool/lpd/cdeskjet-letter-ascii-color/log:\ :af=/var/spool/lpd/cdeskjet-letter-ascii-color/acct:\ :if=/usr/lib/apsfilter/filter/aps-cdeskjet-letter-ascii-color:\ :mx#0:\ :sh: # lp4|cdeskjet-letter-auto-color|cdeskjet auto color:\ :lp=/dev/lp0:\ :sd=/var/spool/lpd/cdeskjet-letter-auto-color:\ :lf=/var/spool/lpd/cdeskjet-letter-auto-color/log:\ :af=/var/spool/lpd/cdeskjet-letter-auto-color/acct:\ :if=/usr/lib/apsfilter/filter/aps-cdeskjet-letter-auto-color:\ :mx#0:\ :sh: # raw|lp5|cdeskjet-letter-raw|cdeskjet auto raw:\ :lp=/dev/lp0:\ :sd=/var/spool/lpd/cdeskjet-raw:\ :lf=/var/spool/lpd/cdeskjet-raw/log:\ :af=/var/spool/lpd/cdeskjet-raw/acct:\ :if=/usr/lib/apsfilter/filter/aps-cdeskjet-letter-raw:\ :mx#0:\ :sh: Any ideas on what is wrong? It's a HP DeskJet 672C that I have had working in the past. I have a list of installed packages that I can supply if that would be of some help. TIA, Chris
apt for hamm
Can someone tell me where I can find the version of apt that works for hamm? TIA
Mail Users
I have a simple mail question. Is it possible for me to use my local mail server on my debian box for my mail? Here is why I'm asking: I'm [EMAIL PROTECTED] Adduser tells me that wax_man is a bad name, so I created a user called choover. So, if I use fetchmail or what ever to get mail, and send it out through my local mail, I need to let everyone know that choover = wax_man for all outgoing/incoming mail. I know that fetchmail can handle this pretty easily, but I have no idea how to handle it on the outgoing side. Any ideas and/or stuff I should read on it? I'm now running debian-slink. TIA, chris
Re: Samba 2.0.0 - are there any deb's?
I just d/l'd the samba packages from the stated directory and installed/configured them with dpkg. But it appears that sambaconfig was removed. What am I supposed to use to configure samba? Chris Remco van de Meent wrote: Björn Elwhagen wrote: I'm interested in knowing wheather there is a debian-package of Samba 2.0.0. If there isn't any and if there is gonna take time for it to be available i might just install the tar-ball instead. Perhaps at bit more hassle but... They are in the project/experimental/ directory on the ftp-site. bye, -Remco -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Program to setup network
Is there a program that will setup my network? I'm looking for a program like the one that the debian install runs. TIA
Re: Program to setup network
lan Craig R. Hodges wrote: network? Do you mean modem or LAN? On Sun, 24 Jan 1999, Chris Hoover wrote: Date: Sun, 24 Jan 1999 23:37:50 -0500 From: Chris Hoover [EMAIL PROTECTED] To: debian-user@lists.debian.org Subject: Program to setup network Resent-Date: 25 Jan 1999 04:41:25 - Resent-From: debian-user@lists.debian.org Resent-cc: recipient list not shown: ; Is there a program that will setup my network? I'm looking for a program like the one that the debian install runs. TIA -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Leafnode
How do I setup leafnode for reading news? I've read the documents, but can't find anything listed about telling leafnode which groups I want to read. TIA
Re: 16 MB STB nVidia TNT 3D AGP
Jeremy, I have the exact same card, and can say that it performs beautifully under linux. As someone else has already stated, the default XF86_SVGA server does not support it in debian. However, you can get the new 3.3.3 version or go to http://www.d128.com/ and get the version for 3.3.2. Chris Jeremy Gunter wrote: I am looking at a purchasing a new Dell. Does anyone have any experience with the 16 MB STB nVidia TNT 3D AGP cards that Dell is offering. More specificly, does anyone happen to know if the card is well supported uder X, and would you recommed it? Jeremy - Jeremy Gunter Network Support Specialist Wabash College EMAIL [EMAIL PROTECTED] -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Verifying backup
First off, I want to say thanks to those who answered my question about block size. I have been able to get dump to backup to my tape drive. Now, I was wondering if there was anyway to verify the integrity the backup that dump did. TIA
Setting up diald.
I'm having to reset up my system after a hard drive crash, and am having a hard time getting diald setup. I've tried to set it up using the provides scripts and examples, but they don't seem to be working. I remember when I first set it up, I was directed to a good page on the web where someone detailed how they set it up. Does anyone know where that page or one like it might be? Thanks, Chris
Re: Help with 2 LAN Cards
[EMAIL PROTECTED] wrote: Thanks for reading this e.mail. I am looking for some help. I currently have 2 LAN cards, using the lance driver. How do I get the 2nd card to configure? I am missing the step required to set up eth1, I believe I can get tcp/ip running after that. This is part of an exercise I am doing to set up a firewall. Any help will be acknowledged, if the answer is RTFM, which manual/man page ?? Thanks Nigel Todd -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null Don't know the specifics about your card and it's drivers. But, when I run two 3Com 3c509's, I have to add the following line to my lilo.conf so it will see both cards: append=ether=3,0x210,eth1 (irq,mem,ethX). If you know that information, you might add it, and see if that helps. To configure it you would just use ifconfig. Look in the /etc/init.d/network file, and see how you are ifconfing'n the first card, and duplicate for the second. Chris
Tape Backup And Block Size
Does anyone know how to find out what the proper block size is for a tape drive? I have an Exabyte 8200 scsi tape drive (8mm 2.5 gig), that I bought used with no documentation. I've looked at the exabyte home page, but did not see any mention of block size. I've tried to backup with dump, but it is not getting the right block size. This is causing it to tell me I need multiple tapes when everything should fit on one. I've been working on this for a while, and haven't gotten it right yet. And to make matters worse, I lost my 5.1 gig maxtor about 2 weeks ago w/o a good backup. So I really want to get this figured out to prevent any more catastrophic data loss. Thanks, Chris Access your e-mail anywhere, at any time. Get your FREE BellSouth Web Mail account today! http://webmail.bellsouth.net
irc.debian.org - No DNS
It appears that the dns for irc.debian.org is fscked up. When I try to ping it, I get unknown host. Does anyone know of another irc server I can use to get on the #debian channel?
[OFFTOPIC]Gnu Utils For AIX
I was wondering if anyone knows if there are any GNU (or other no cost) utils that work with AIX. Specifically, I'm hoping to find something like top. So we can find out which process is trying to kill the machine here at work. TIA, Chris
Setting Up Newsgroups
How do I go about setting up newsgroups on my hamm box? I installed the news servers, but I'm unsure of what to do next. I just want to pull maybe 10 groups down to my local box. Thanks
Slink/Potatoe libc6
I'm trying to upgrade to and/or install either slink or potatoe, but keep running into a problem with libc6. Several programs keep saying they depend on libc6 = 2.0.7u. However, this is not an available package. Does anyone know where I can find this package? Thanks, Chris -
burning debian cd from win95
I have the opportunity to burn a debian cd at my job. However, I have to do it in win95. Has anyone done this? Is there anything I need to be careful of? I'm planning on burning a slink cd so I can take it to my fathers house and install linux there for him. Thanks, Chris
Tv grabbers
I have just gotten a wintv card, and it appears to be working fine. However, I can't seem to find a screen grabber for it. I'm looking for one that can be ran from the command line, and grab what ever is on the device without requiring any user interface. Does anyone know if a program like this exists? Thanks, Chris llsouth.net
PPP Problems cont.
I still can not get my linux box to connect to my isp (bellsouth.net), and am looking for ideas and help. Attached is a copy of my /etc/ppp/peers/provider, /etc/chatscripts/provider, and /var/log/ppp.log. Can someone tell me what is going on here? I've used pppconfig to set it all up, and it dials out fine, but it ppp dies right after connecting. Thanks, Chris /etc/ppp/peers/provider # This file was generated by pppconfig. You can edit the following lines # but please do not delete lines or the change the comments or you will # confuse pppconfig. noauth #pppconfig_noauth connect /usr/sbin/chat -v -f /etc/chatscripts/provider #pppconfig_connect debug #pppconfig_debug /dev/ttyS2 #pppconfig_dev 115200 #pppconfig_speed defaultroute #pppconfig_route noipdefault #pppconfig_ipdefault user wax_man #pppconfig_user # End of pppconfig controlled lines. You can add lines below here without # confusing pppconfig. /var/log/ppp.log Nov 9 20:58:18 tux pppd[480]: pppd 2.3.5 started by root, uid 0 Nov 9 20:58:19 tux chat[481]: abort on (BUSY) Nov 9 20:58:19 tux chat[481]: abort on (NO CARRIER) Nov 9 20:58:19 tux chat[481]: abort on (VOICE) Nov 9 20:58:19 tux chat[481]: abort on (NO DIALTONE) Nov 9 20:58:19 tux chat[481]: abort on (NO ANSWER) Nov 9 20:58:19 tux chat[481]: send (ATZ^M) Nov 9 20:58:19 tux chat[481]: expect (OK) Nov 9 20:58:38 tux chat[481]: ATZ^M^M Nov 9 20:58:38 tux chat[481]: OK Nov 9 20:58:38 tux chat[481]: -- got it Nov 9 20:58:38 tux chat[481]: send (ATDT2528294^M) Nov 9 20:58:38 tux chat[481]: expect (CONNECT) Nov 9 20:58:38 tux chat[481]: ^M Nov 9 20:59:18 tux chat[481]: ATDT2528294^M Nov 9 20:59:23 tux chat[481]: alarm Nov 9 20:59:23 tux chat[481]: Failed Nov 9 20:59:23 tux pppd[480]: Connect script failed Nov 9 20:59:24 tux pppd[480]: Exit. /etc/chatscripts/provider ABORT BUSY ABORT NO CARRIER ABORT VOICE ABORT NO DIALTONE ABORT NO ANSWER ATZ OK ATDT2528294 CONNECT '' sername: \d\qwax_man ssword: \qpassword \d\c
bellsouth.net
Does anyone know what bellsouth.net is using for connect strings? I tried to connect with the standard pppconfig stuff, but it is exiting out right after dialing the number. The ppp.log file has a line with alarm followed by the line(s) stating that it is exiting. Any ideas on what to do next? Thanks, Chris
dbf Program
I'm in need of a program that can convert csv (comma seperated values) files into a dbf format file. Does anyone know of a program or script that can do this? I really don't care what operating system it runs on although linux/unix is prefered. Thanks, Chris
scripting cvs updates
I'd like to develop a script that will automatically d/l the E cvs source each night. However, I have to login to the cvs server and provide it with a password (password is just pressing the return key). Is there a way to have the script send the return key w/o human interaction? Thanks, Chris
Setting up Samba
I've just installed the samba .deb package, and was wondering what I need to do next as far as setting up the rest of the config files? Is there a good doc on how to do this (debian specific)? Thanks, Chris
Samba Questions
I have a question about samba and it's capabilities. I have two systems on a network in my house. One I use as a production server which has my connection to the internet, and then my play machine. The play machine is a dual boot between linux and win95. Anyway, I'm in need of more space for win95, and wanted to put the drive in my production server. But, I don't really want to format the drive as a vfat drive. Can samba serve the drive to win95 if it is an ext2 partition? Also are there any limitations or problems doing this (i.e. read only)? Thanks, Chris
.xsession and xdm
I have linked my working .xinitrc file to .xsession so that I could run xdm. However, every time I log in, xdm does not seem to execute the .xsession file as stated in the man pages. Could someone tell me what is going on, and how to fix it? Thanks, chris
Re: .xsession and xdm
Eric, Thanks for the help. It turned out that my .xinitrc file did not have the executable bit set. Thanks, chris E.L. Meijer (Eric) wrote: I have linked my working .xinitrc file to .xsession so that I could run xdm. However, every time I log in, xdm does not seem to execute the .xsession file as stated in the man pages. Could someone tell me what is going on, and how to fix it? Things to check: - is your .xinitrc executable as .xsession should be? - do you get any clues written in ~/.xsession-errors? - do you have a line 'allow-user-xsession' in /etc/X11/config? HTH, Eric -- E.L. Meijer ([EMAIL PROTECTED]) | tel. office +31 40 2472189 Eindhoven Univ. of Technology | tel. lab. +31 40 2475032 Lab. for Catalysis and Inorg. Chem. (TAK) | tel. fax+31 40 2455054 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: cable modem
Russ, You should have no problem using the @home modem with linux. I'm using it right now, and it really flies. The only thing I have left to do is to set up dhcp, but for the time being, I'm using the static ip they gave me. chris Russ Cook wrote: My local cable company is now offering high-speed cable modem service. The following excerpt is from their web page QA section. I am running Slink with IPV4 (I believe). from Cable web page Can I use any TCP/IP stack with @Home? At this time, @Home supports the following: Windows 95, NT workstations, and MacOS 7.5.3 with open Transport v. 1.1 or greater TCP/IP stacks. from Cable web page Does anyone think I would have an insurmountable problem using this service? Thanks, Russ Russell Cook, Engineering Branch WSR-88D Operational Support Facility (405)366-6520 x4237 [EMAIL PROTECTED], [EMAIL PROTECTED] -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Naming machines on network.
I need some advise on how to name the machines on my network. Here is the current setup: internet---machine1---hubmachine2 My isp has given me a name of ci1000135-a.grnvle1.sc.home.com with a static ip. I also have aquired the name choover.ml.org for the same ip. Is it possible for a machine to have more than one name (i.e. I'd like to know machine 1 as waxman.choover.ml.org). Also, what should I name machine2 (I'd like tux.choover.ml.org). I'm using ip masq. on machine 1 to hide my network which consists of private ip's (192.168.1.1 192.168.1.2). So far, everything is working as far as internet access from both machines. However machine 2's mail is screwed up, and from comments an a previous question, it looks like a naming issue. Also, is it possible for me to set up the network where I can access either machine from the internet? TIA, Chris
Re: cable-modem woes (TCI/@HOME)
Stuart: I also have a cable modem with @HOME. They are relativley easy to get working. Set the ip of the nic they gave you to 24.1.106.xxx. Then set the netmask to 255.255.255.0. The gateway is 24.1.106.1. Then use the DNS servers they gave you. They should have given you a name for your machine (mine is ci1000135-a.grnvle1.sc.home.com) . Your HOSTNAME = the first part (ci1000135-a in my case). In /etc/resolv.conf add the line search = grnvle1.sc.home.com - substitute the grnvle1.sc.home.com for what ever yours is. Then add nameserver 24.1.64.zzz. You can have as many name servers as you need, but only 1 per line. Make sure your kernel is compiled with support for your card (it appears that it is). If this does not make it work, you might need to compile ip-forwarding into your kernel. Also, make sure that you setup ipfwadm with firewall rules, since you have a static IP. Best of luck, Chris From: Stuart Marshall [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 15, 1998 1:39 AM To: debian-user@lists.debian.org Subject: cable-modem woes (TCI/@HOME) Hi, I am having trouble getting my cable-modem working and I am wondering if somebody out there knows the right way. Here is the info: - works in win98 - looks like a subnet of a class A network (this could be my problem) - ip address is 24.1.106.xxx (xxx not shown) - netmask from provider is 255.255.240.0 - gateway is 24.1.104.1 - dns server is 24.1.64.zzz - domain set in resolv.conf I am really unsure about the network address I should use. From the HOWTO's it looks like I should use 24.1.96.0 since the is the result of ANDing the ip address and netmask. I tried lots of things but none seem to work. Win98 only asks for ip address and netmask -- I guess it figures out the network address. I also don't know if I should try a broadcast address either. I can bring eth0 up with no errors and set the routing but I can't connect to anything. Any ideas? Am I doing something stupid? thanks very much, Stuart -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Problems with Mail
I'm having some preplexing mail problems, and was wondering if someone could help me resolve the problem. I have 2 linux boxes networked together. My production box also has the connection to the internet. It is running all of my servers, and pulling mail down from my isp with fetchmail. I'm wanting to be able to d/l my mail from my production box to my development box, but am not able to get it to work. My first attempt was to use fetchmail. It seemed to pull the mail down, but it never showed up in my /var/spool/mail/user file. After examining the system, it appears that is is stuck in /var/spool/smail/incoming. Does anyone have any idea why smail is not delivering it? My temp solution is to use netscape mail program to d/l the mail to my development box. But I really don't want to be stuck with this as the solution. BTW, I really don't want to directly d/l the mail to my development box, since I can't reach it from outside my house (it's on a private network, using ipmasq to get out). Ideas? Thanks, Chris
Re: Fonts for Gimp
Thanks for the help. I went and installed both of these font packages, but it did not seem to solve the problem. I still seem to be missing the fonts that gimp wants to run many of the xtns. Especially the ones under script-fu. Is anyone else having the same problem? Are there any other font packages that I need to install? Please help me solve this problem. Thanks. On 02-Sep-98 Frank Barknecht wrote: Chris Hoover hat gesagt: // Chris Hoover wrote: Can someone tell me where to get the fonts for use with gimp? I've tried to use several of the built in xtns, and they all seem to die because I don't have the font(s) they need. Install the freefont and sharefont packages. sharefont lives in non-free. -- ____ Frank Barknecht __ __ trip\ \ / /wire __ / __// __ /__/ __// // __ \ \/ / __ \\ ___\ / / / / / / / // // /\ \\ ___\\ \ /_/ /_/ /_/ /_//_// / \ \\_\\_\ /_/\_\ -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- E-Mail: Chris Hoover [EMAIL PROTECTED] Date: 02-Sep-98 Time: 19:10:14 This message was sent by XFMail --
Fonts for Gimp
Can someone tell me where to get the fonts for use with gimp? I've tried to use several of the built in xtns, and they all seem to die because I don't have the font(s) they need. Thanks -- E-Mail: Chris Hoover [EMAIL PROTECTED] Date: 02-Sep-98 Time: 04:50:22 This message was sent by XFMail --
making mp3's
I'd like to make some mp3 off of my favorite cd's and was wondering if someone could direct me as how to go about doing this. Which programs do you use, and how to do it. Thanks, Chris -- E-Mail: Chris Hoover [EMAIL PROTECTED] Date: 27-Aug-98 Time: 07:13:01 This message was sent by XFMail --