Re: Partitioning problem on ACER ASPIRE 5672WLMi during installation process
Hi. I've tryed this way but nothing is possible. I didn't find anything where I can set the partition manually and preserve the old one. Any new advice? I've tested the same netinstallation for another machine with IDE disks and all was ok. It seems that the problem is using the SATA disks. Best Regards. Gabriele Clive Menzies ha scritto: On (16/01/07 17:06), Gabriele Cicala wrote: I while I try to install Debian Etch using the actual net-installation CD I encounter some problem for the partition already present on the laptop. This machine is a dual-boot computer with windows and another Debian installation that I want to re-install. None of these partiotion is visible when I try to set the manual partitioning but I have to choose between the guided partition or else to use the entire disk. Is there a work-around? The ata_piix module is loaded. If you choose guided partitioning, you still get a chance to make manual adjustments before writing the partition table. Regards Clive -- www.clivemenzies.co.uk ... ...strategies for business -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Partitioning problem on ACER ASPIRE 5672WLMi during installation process
Hi. I I try this way the guided partitioning try to use all my disk and in the other steps there isn't a way to use a manual partiotioning. Any other advice? Best Regards. Gabriele Clive Menzies ha scritto: On (16/01/07 17:06), Gabriele Cicala wrote: I while I try to install Debian Etch using the actual net-installation CD I encounter some problem for the partition already present on the laptop. This machine is a dual-boot computer with windows and another Debian installation that I want to re-install. None of these partiotion is visible when I try to set the manual partitioning but I have to choose between the guided partition or else to use the entire disk. Is there a work-around? The ata_piix module is loaded. If you choose guided partitioning, you still get a chance to make manual adjustments before writing the partition table. Regards Clive -- www.clivemenzies.co.uk ... ...strategies for business -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Partitioning problem on ACER ASPIRE 5672WLMi during installation process
On (17/01/07 03:38), glycerin wrote: I've tryed this way but nothing is possible. I didn't find anything where I can set the partition manually and preserve the old one. Any new advice? What medium are you using to boot? If sarge (3.1) try typing expert26 at the boot prompt; this should give you the option to load particular modules to handle the SATA disk. Alternatively, you could download etch (soon to be stable release) and try with that; it deals with later hardware better: http://cdimage.debian.org/cdimage/etch_di_rc1/i386/iso-cd/debian-testing-i386-netinst.iso HTH Regards Clive -- www.clivemenzies.co.uk ... ...strategies for business -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Partitioning problem on ACER ASPIRE 5672WLMi during installation process
On (17/01/07 03:57), glycerin wrote: I I try this way the guided partitioning try to use all my disk and in the other steps there isn't a way to use a manual partiotioning. Any other advice? On (16/01/07 17:06), Gabriele Cicala wrote: I while I try to install Debian Etch using the actual net-installation CD I encounter some problem for the partition already present on the laptop. This machine is a dual-boot computer with windows and another Debian installation that I want to re-install. None of these partiotion is visible when I try to set the manual partitioning but I have to choose between the guided partition or else to use the entire disk. Is there a work-around? The ata_piix module is loaded. oops sorry... ignore previous post! brain not in gear :) If the module is loaded I'm not sure where to go from here: File an installation report giving detail of the steps you took and the problems you've encountered Regards Clive -- www.clivemenzies.co.uk ... ...strategies for business -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Partitioning problem on ACER ASPIRE 5672WLMi during installation process
I while I try to install Debian Etch using the actual net-installation CD I encounter some problem for the partition already present on the laptop. This machine is a dual-boot computer with windows and another Debian installation that I want to re-install. None of these partiotion is visible when I try to set the manual partitioning but I have to choose between the guided partition or else to use the entire disk. Is there a work-around? The ata_piix module is loaded. In attachment I enclose the dmesg output and also the lspci -nn output is the following: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE [8086:27c4] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility X1400 [1002:7145] 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02) 04:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5789 Gigabit Ethernet PCI Express [14e4:169d] (rev 21) 0a:09.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039] 0a:09.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] 0a:09.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] Thank you in advance for whom that can solve this problem. Best regards. Gabriele sbcore: registered new driver usbfs usbcore: registered new driver hub SCSI subsystem initialized ACPI: PCI Interrupt :00:1d.7[A] - GSI 23 (level, low) - IRQ 66 PCI: Setting latency timer of device :00:1d.7 to 64 ehci_hcd :00:1d.7: EHCI Host Controller ehci_hcd :00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd :00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device :00:1d.7 ehci_hcd :00:1d.7: irq 66, io mem 0xc8004000 ehci_hcd :00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected libata version 1.20 loaded. USB Universal Host Controller Interface driver v3.0 Yenta: ISA IRQ mask 0x0cf8, PCI irq 201 Socket status: 3006 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff cs: IO port probe 0x3000-0x3fff: clean. pcmcia: parent PCI bridge Memory window: 0xc840 - 0xc84f pcmcia: parent PCI bridge Memory window: 0x5000 - 0x51ff ata_piix :00:1f.2: version 1.05 ata_piix :00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt :00:1f.2[B] - GSI 19 (level, low) - IRQ 193 PCI: Setting latency timer of device :00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14 cs: IO port probe 0x100-0x3af: excluding 0x370-0x377 cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. ata1: dev 0 cfg 49:2f00 82:346b 83:7d09 84:6003 85:3469 86:3c09 87:6003 88:207f ata1: dev 0 ATA-7, max UDMA/133, 195371568 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix Vendor: ATA Model: ST9100824AS Rev: 3.06 Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma
Re: Partitioning problem on ACER ASPIRE 5672WLMi during installation process
On (16/01/07 17:06), Gabriele Cicala wrote: I while I try to install Debian Etch using the actual net-installation CD I encounter some problem for the partition already present on the laptop. This machine is a dual-boot computer with windows and another Debian installation that I want to re-install. None of these partiotion is visible when I try to set the manual partitioning but I have to choose between the guided partition or else to use the entire disk. Is there a work-around? The ata_piix module is loaded. If you choose guided partitioning, you still get a chance to make manual adjustments before writing the partition table. Regards Clive -- www.clivemenzies.co.uk ... ...strategies for business -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
