RE: [Declude.JunkMail] Mail Pre-Processor recommendations (ES)
I just installed Alligate in front of my decluded mail server and it certainly cuts down alot of the traffic to the mail server. Previously the cpu on the declude mail server was 60-90% all day, now it rarely goes over 10%. No more backscatter! No more dictionary attacks. Its pretty straightforward to configure and only took me about an hour or so. A small tip though in order to save all the pain of dns changes if you have many domains, to redirect all your smtp traffic to the Alligate server, you can configure your router to send all port 25 traffic to the Alligate server instead of the mail server. Declude is an excellent product, but add Alligate to it and you you are onto a winner. Kindest Regards Craig Edmonds 123 Marbella Internet W: www.123marbella.com E : [EMAIL PROTECTED] LEGAL DISCLAIMER - This message may contain confidential, proprietary or legally privileged information and is intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby informed that you must not use, disseminate, copy it in any form or take any action in reliance on it. If you have received this message in error please delete it and any copies of it and notify it to the sender. AVISO LEGAL - Este mensaje puede contener informacion confidencial, en propiedad o legalmente protegida y esta dirigida unicamente para el uso de la persona destinataria. Si usted no es la persona destinataria de este mensaje, por la presente se le comunica que no debe usar, difundir, copiar de ninguna forma, ni emprender ninguna accion en relacion con ella. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Sent: 28 May 2008 23:32 To: declude.junkmail@declude.com Subject: Re: [Declude.JunkMail] Mail Pre-Processor recommendations Scott, Alligate is a good gateway to use when you have something like Declude behind it. The only reason that I can think of that your Barracuda box is seeing that many messages would be because you might not be validating addresses. Like Andrew said, you can cut your connection traffic by 95% with ease, but a large number of those connections are to bad addresses (backscatter and 'dictionary' attacks). You must validate addresses at your gateway. You can run Alligate on a single core box with 1 GB of memory and a single hard drive. Just make sure to dedicate the box to Alligate in order to avoid issues when resources are that sparse. Matt Scott Fosseen wrote: I believe I have seen some replies to this already, but I though I would put this out again. I am hosting about 30 domains worth of email and filtering for an additional 10 domains. My current configuration is all mail is pre-filtered through a Barracuda 400 box, then forwarded to a Smartermail 4.x server running Declude with Sniffer, Zero Hour, invURIBL. The Smartermail/Declude box is a Dual Quad Core HP server with 2 Gig of RAM. I am currently receiving about 600k email messages a day on the Barracuda box, and it is seeing performance issues. Before I purchase a 2nd Barracuda box I though I would check to see if anyone has a better solution. Declude still catches 40-60% SPAM after the Barracuda box. Thanks _ This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Your are asked to notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Prairie Lakes Area Education Agency. Prairie Lakes Area Education Agency accepts no liability for any damage caused by any virus transmitted by this email. - _ Scott Fosseen - Systems Engineer - Prairie Lakes AEA - http://www.aea8.k12.ia.us/tech _ We live in a world today where lemonade is made from artificial flavors and furniture polish is made from real lemons. - Alfred E.Neumann MAD magazine _ --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an
Re: [Declude.JunkMail] Mail Pre-Processor recommendations
Colbeck, Andrew wrote: I use Alligate from Solid Oak Software, and I like it a lot. as do I. The really slick part is how it reduces bandwidth - it *very* accurately distinguishes spam etal before the DATA command thereby preventing the unwanted emails from ever being received.. Shameless plug - I have a small utility that will allow Declude (for Imail) to run on an Alligate box without Imail being present. If anyone is interested email me off list and I will send you a copy. -Nick On my primary gateway, I received just shy of 500,000 connections in the last 24 hours, and my Declude only had to see 4% of that traffic. Yes, 4%. I'm spending less time doing clever things in Declude, because Alligate is pre-filtering so well for me. Andrew. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Fosseen Sent: Wednesday, May 28, 2008 1:29 PM To: declude.junkmail@declude.com Subject: [Declude.JunkMail] Mail Pre-Processor recommendations I believe I have seen some replies to this already, but I though I would put this out again. I am hosting about 30 domains worth of email and filtering for an additional 10 domains. My current configuration is all mail is pre-filtered through a Barracuda 400 box, then forwarded to a Smartermail 4.x server running Declude with Sniffer, Zero Hour, invURIBL. The Smartermail/Declude box is a Dual Quad Core HP server with 2 Gig of RAM. I am currently receiving about 600k email messages a day on the Barracuda box, and it is seeing performance issues. Before I purchase a 2nd Barracuda box I though I would check to see if anyone has a better solution. Declude still catches 40-60% SPAM after the Barracuda box. Thanks _ This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Your are asked to notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Prairie Lakes Area Education Agency. Prairie Lakes Area Education Agency accepts no liability for any damage caused by any virus transmitted by this email. - _ Scott Fosseen - Systems Engineer - Prairie Lakes AEA - http://www.aea8.k12.ia.us/tech _ We live in a world today where lemonade is made from artificial flavors and furniture polish is made from real lemons. - Alfred E.Neumann MAD magazine _ --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] Mail Pre-Processor recommendations
Nick Hayer said: I have a small utility that will allow Declude (for Imail) to run on an Alligate box without Imail being present. ... and it works. I'm using Nick's utility so that my antispam gateway is Alligate + Nick's utility instead of IMail. Like many people, I bought into Declude as my antispam product, and IMail just happened to be the platform it ran on. I'm much happier paying for Alligate than IMail. Ipswitch never made me happy. Never. Andrew. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nick Hayer Sent: Thursday, May 29, 2008 6:15 AM To: declude.junkmail@declude.com Subject: Re: [Declude.JunkMail] Mail Pre-Processor recommendations Colbeck, Andrew wrote: I use Alligate from Solid Oak Software, and I like it a lot. as do I. The really slick part is how it reduces bandwidth - it *very* accurately distinguishes spam et al before the DATA command thereby preventing the unwanted emails from ever being received.. Shameless plug - I have a small utility that will allow Declude (for Imail) to run on an Alligate box without Imail being present. If anyone is interested email me off list and I will send you a copy. -Nick On my primary gateway, I received just shy of 500,000 connections in the last 24 hours, and my Declude only had to see 4% of that traffic. Yes, 4%. I'm spending less time doing clever things in Declude, because Alligate is pre-filtering so well for me. Andrew. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Fosseen Sent: Wednesday, May 28, 2008 1:29 PM To: declude.junkmail@declude.com Subject: [Declude.JunkMail] Mail Pre-Processor recommendations I believe I have seen some replies to this already, but I though I would put this out again. I am hosting about 30 domains worth of email and filtering for an additional 10 domains. My current configuration is all mail is pre-filtered through a Barracuda 400 box, then forwarded to a Smartermail 4.x server running Declude with Sniffer, Zero Hour, invURIBL. The Smartermail/Declude box is a Dual Quad Core HP server with 2 Gig of RAM. I am currently receiving about 600k email messages a day on the Barracuda box, and it is seeing performance issues. Before I purchase a 2nd Barracuda box I though I would check to see if anyone has a better solution. Declude still catches 40-60% SPAM after the Barracuda box. Thanks _ This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Your are asked to notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Prairie Lakes Area Education Agency. Prairie Lakes Area Education Agency accepts no liability for any damage caused by any virus transmitted by this email. - _ Scott Fosseen - Systems Engineer - Prairie Lakes AEA - http://www.aea8.k12.ia.us/tech _ We live in a world today where lemonade is made from artificial flavors and furniture polish is made from real lemons. - Alfred E.Neumann MAD magazine _ --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com.