Re: [dev] StarOffice3.1 executing macros from the command line
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello Mathias, thanks a lot for your help. I will try to execute the macro as you mentioned. Kind regards Markus Mathias Bauer schrieb: Markus Daniel wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello Mathias, Markus Daniel schrieb: In case that doesn't work, please ask again. It does not work. Better: It works but SO5.2 interprets the layout not like SO3.1. E.g. page breaks are different and while SO31 shows ? SO52 sorry, encoding goes wrong, not ?, the EURO-Sign should be there since no other version of staroffice or openoffice can handle the layout like staroffice 3.1 I tried to print pdfs by using a macro which is called on the command prompt. The command prompt call of a maro doesn't seemed to work in stareoffice3.1. Is there any other way to load and print a few thousand documents with staroffice 3.1? You could try to bind your macro to the StartApplication event (this should work in 3.1 IIRC) so that SO automatically starts it when SO starts. If you wanted to pass arguments to it you could try to pass them via environment variables, in case SO Basic supported access to the program's environment (I don't recall that). Another alternative would be passing these arguments via a text file that the SO Basic macro reads in before doing its work. Regards, Mathias - -- /** * Markus Daniel * Bachelor of Science * * Synyx GmbH Co. KG * OpenSource Solutions * Karlstr. 68 * 76137 Karlsruhe * * phone +49(0)721 66 48 79 31 * fax +49(0)721 66 48 877 * eMail markus.dan...@synyx.de * www http://www.synyx.de * skype synyx_daniel * irc irc.synyx.de * * Sitz der Gesellschaft: Karlsruhe * Registergericht: Mannheim * Handelsregisternummer: HRA 4793 * USt-IdNr.: DE249264296 * * Komplementärin: Elatech Verwaltungs GmbH * Sitz der Gesellschaft: Karlsruhe * Geschäftsführer: Markus Daniel * Registergericht: Mannheim * Handelsregisternummer: HRB 7250 */ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFLaDC3A6KmbVkuXQkRAtHqAKCRHgisowS+e5yANZcKhVI+BixVBwCgtxkU 3499q7bwYf6UlJXRGuR4v1A= =1DPu -END PGP SIGNATURE- - To unsubscribe, e-mail: dev-unsubscr...@openoffice.org For additional commands, e-mail: dev-h...@openoffice.org
Re: [dev] StarOffice3.1 executing macros from the command line
Markus Daniel wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello Mathias, Markus Daniel schrieb: In case that doesn't work, please ask again. It does not work. Better: It works but SO5.2 interprets the layout not like SO3.1. E.g. page breaks are different and while SO31 shows ? SO52 sorry, encoding goes wrong, not ?, the EURO-Sign should be there since no other version of staroffice or openoffice can handle the layout like staroffice 3.1 I tried to print pdfs by using a macro which is called on the command prompt. The command prompt call of a maro doesn't seemed to work in stareoffice3.1. Is there any other way to load and print a few thousand documents with staroffice 3.1? You could try to bind your macro to the StartApplication event (this should work in 3.1 IIRC) so that SO automatically starts it when SO starts. If you wanted to pass arguments to it you could try to pass them via environment variables, in case SO Basic supported access to the program's environment (I don't recall that). Another alternative would be passing these arguments via a text file that the SO Basic macro reads in before doing its work. Regards, Mathias -- Mathias Bauer (mba) - Project Lead OpenOffice.org Writer OpenOffice.org Engineering at Sun: http://blogs.sun.com/GullFOSS Please don't reply to nospamfor...@gmx.de. I use it for the OOo lists and only rarely read other mails sent to it. - To unsubscribe, e-mail: dev-unsubscr...@openoffice.org For additional commands, e-mail: dev-h...@openoffice.org
Re: [dev] StarOffice3.1 executing macros from the command line
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello Mathias, Markus Daniel schrieb: In case that doesn't work, please ask again. It does not work. Better: It works but SO5.2 interprets the layout not like SO3.1. E.g. page breaks are different and while SO31 shows ? SO52 sorry, encoding goes wrong, not ?, the EURO-Sign should be there since no other version of staroffice or openoffice can handle the layout like staroffice 3.1 I tried to print pdfs by using a macro which is called on the command prompt. The command prompt call of a maro doesn't seemed to work in stareoffice3.1. Is there any other way to load and print a few thousand documents with staroffice 3.1? Thanks in advance Markus - -- /** * Markus Daniel * Bachelor of Science * * Synyx GmbH Co. KG * OpenSource Solutions * Karlstr. 68 * 76137 Karlsruhe * * phone +49(0)721 66 48 79 31 * fax +49(0)721 66 48 877 * eMail markus.dan...@synyx.de * www http://www.synyx.de * skype synyx_daniel * irc irc.synyx.de * * Sitz der Gesellschaft: Karlsruhe * Registergericht: Mannheim * Handelsregisternummer: HRA 4793 * USt-IdNr.: DE249264296 * * Komplementärin: Elatech Verwaltungs GmbH * Sitz der Gesellschaft: Karlsruhe * Geschäftsführer: Markus Daniel * Registergericht: Mannheim * Handelsregisternummer: HRB 7250 */ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFLK5veA6KmbVkuXQkRAvbtAJ464CxLC5VUkzZXzzqcDLF4f1px7gCbBAWT eRjtSptpd9lBOH4pdRaHPbU= =Gz0F -END PGP SIGNATURE- - To unsubscribe, e-mail: dev-unsubscr...@openoffice.org For additional commands, e-mail: dev-h...@openoffice.org
Re: [dev] StarOffice3.1 executing macros from the command line
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Markus Daniel schrieb: Hiho, Mathias Bauer schrieb: Markus Daniel wrote: I tried to load the documents with OpenOffice, this works fine, but the layout was not like the original sdw-Files and the pdf-export in early OpenOffice-Versions is not so good as needed. Perhaps you can find an SO5 copy somewhere (as this was available as a free download at some point in time) and - if you are lucky - this version handles your SO3 documents properly. I will try this approach, thank you for the tipp. Can you tell me if the command promt call of a macro works or not? soffice3.exe macro:///lib.module.macro1 Sorry, I don't remember. My recommendation would be to use SO5 (if you can find one) for conversion to the latest sdw format (that OOo can hopefully import better) and then use OOo1 and your macro to export to PDF. I found SO5, installed it and tried to open the SO3-Documents in SO5 but the layout of the Documents in SO5 is broken, looks like the documents look in OpenOffice103. In case that doesn't work, please ask again. It does not work. Better: It works but SO5.2 interprets the layout not like SO3.1. E.g. page breaks are different and while SO31 shows ? SO52 sorry, encoding goes wrong, not ?, the EURO-Sign should be there and OpenOffice103 shows DM. Any ideas? Thanks in advance Markus - - To unsubscribe, e-mail: dev-unsubscr...@openoffice.org For additional commands, e-mail: dev-h...@openoffice.org - -- /** * Markus Daniel * Bachelor of Science * * Synyx GmbH Co. KG * OpenSource Solutions * Karlstr. 68 * 76137 Karlsruhe * * phone +49(0)721 66 48 79 31 * fax +49(0)721 66 48 877 * eMail markus.dan...@synyx.de * www http://www.synyx.de * skype synyx_daniel * irc irc.synyx.de * * Sitz der Gesellschaft: Karlsruhe * Registergericht: Mannheim * Handelsregisternummer: HRA 4793 * USt-IdNr.: DE249264296 * * Komplementärin: Elatech Verwaltungs GmbH * Sitz der Gesellschaft: Karlsruhe * Geschäftsführer: Markus Daniel * Registergericht: Mannheim * Handelsregisternummer: HRB 7250 */ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFLKLLAA6KmbVkuXQkRAlCFAJ4nG03YWaz/uSV9mqJjpOckzqHzCQCfSb+x erkfbTbXD1DFvAB0uUcBLmA= =j0RF -END PGP SIGNATURE- - To unsubscribe, e-mail: dev-unsubscr...@openoffice.org For additional commands, e-mail: dev-h...@openoffice.org
Re: [dev] StarOffice3.1 executing macros from the command line
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hiho, Mathias Bauer schrieb: Markus Daniel wrote: I tried to load the documents with OpenOffice, this works fine, but the layout was not like the original sdw-Files and the pdf-export in early OpenOffice-Versions is not so good as needed. Perhaps you can find an SO5 copy somewhere (as this was available as a free download at some point in time) and - if you are lucky - this version handles your SO3 documents properly. I will try this approach, thank you for the tipp. Can you tell me if the command promt call of a macro works or not? soffice3.exe macro:///lib.module.macro1 Sorry, I don't remember. My recommendation would be to use SO5 (if you can find one) for conversion to the latest sdw format (that OOo can hopefully import better) and then use OOo1 and your macro to export to PDF. I found SO5, installed it and tried to open the SO3-Documents in SO5 but the layout of the Documents in SO5 is broken, looks like the documents look in OpenOffice103. In case that doesn't work, please ask again. It does not work. Better: It works but SO5.2 interprets the layout not like SO3.1. E.g. page breaks are different and while SO31 shows ? SO52 and OpenOffice103 shows DM. Any ideas? Thanks in advance Markus - -- /** * Markus Daniel * Bachelor of Science * * Synyx GmbH Co. KG * OpenSource Solutions * Karlstr. 68 * 76137 Karlsruhe * * phone +49(0)721 66 48 79 31 * fax +49(0)721 66 48 877 * eMail markus.dan...@synyx.de * www http://www.synyx.de * skype synyx_daniel * irc irc.synyx.de * * Sitz der Gesellschaft: Karlsruhe * Registergericht: Mannheim * Handelsregisternummer: HRA 4793 * USt-IdNr.: DE249264296 * * Komplementärin: Elatech Verwaltungs GmbH * Sitz der Gesellschaft: Karlsruhe * Geschäftsführer: Markus Daniel * Registergericht: Mannheim * Handelsregisternummer: HRB 7250 */ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFLJmC/A6KmbVkuXQkRApchAKDQKrm1vdNXTaDABfMNOzwk7HB6WgCgmIEh jjgwcalmD5eewQQnGVj5fxc= =odHv -END PGP SIGNATURE- - To unsubscribe, e-mail: dev-unsubscr...@openoffice.org For additional commands, e-mail: dev-h...@openoffice.org
Re: [dev] StarOffice3.1 executing macros from the command line
Markus Daniel wrote: I tried to load the documents with OpenOffice, this works fine, but the layout was not like the original sdw-Files and the pdf-export in early OpenOffice-Versions is not so good as needed. Perhaps you can find an SO5 copy somewhere (as this was available as a free download at some point in time) and - if you are lucky - this version handles your SO3 documents properly. I will try this approach, thank you for the tipp. Can you tell me if the command promt call of a macro works or not? soffice3.exe macro:///lib.module.macro1 Sorry, I don't remember. My recommendation would be to use SO5 (if you can find one) for conversion to the latest sdw format (that OOo can hopefully import better) and then use OOo1 and your macro to export to PDF. In case that doesn't work, please ask again. Regards. Mathias -- Mathias Bauer (mba) - Project Lead OpenOffice.org Writer OpenOffice.org Engineering at Sun: http://blogs.sun.com/GullFOSS Please don't reply to nospamfor...@gmx.de. I use it for the OOo lists and only rarely read other mails sent to it. - To unsubscribe, e-mail: dev-unsubscr...@openoffice.org For additional commands, e-mail: dev-h...@openoffice.org
Re: [dev] StarOffice3.1 executing macros from the command line
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello Matthias, thank you for the quick response. Mathias Bauer schrieb: Markus Daniel wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello, this is not really an OpenOffice-Issue but I am running out of ideas... I am trying to convert old StarOffice3.1 Documents in PDFs. I cannot use OpenOffice because the formatting of the documents will be destroid (tested with OpenOffice 1.0.3). With OpenOffice I called a macro from the commandline like (all on Windows) soffice.exe macro:///lib.module.macro1 this works fine but soffice3.exe macro:///lib.module.macro1 with StarOffice3.1 doesn't work I tried a lot of possibilities nothing works. It looks like StarOffice3 was not able to execute macros from the commandline. Is this true? Is a install version of StarOffice3.1 somewhere available? I don't think so, at least not if you want to avoid illegal copies. Besides that, AFAIR there was no PDF export in SO3, so all you can do with it is converting the documents into SO5 binary format. This can be done in batch processing using the built-in document converter. Then you can use OOo1.x to load the SO5 documents and export to PDF. OOo1.x is the closest match for the SO binary format. I tried to load the documents with OpenOffice, this works fine, but the layout was not like the original sdw-Files and the pdf-export in early OpenOffice-Versions is not so good as needed. Perhaps you can find an SO5 copy somewhere (as this was available as a free download at some point in time) and - if you are lucky - this version handles your SO3 documents properly. I will try this approach, thank you for the tipp. Can you tell me if the command promt call of a macro works or not? soffice3.exe macro:///lib.module.macro1 Thanks a lot. Kind regards Markus - -- /** * Markus Daniel * Bachelor of Science * * Synyx GmbH Co. KG * OpenSource Solutions * Karlstr. 68 * 76137 Karlsruhe * * phone +49(0)721 66 48 79 31 * fax +49(0)721 66 48 877 * eMail markus.dan...@synyx.de * www http://www.synyx.de * skype synyx_daniel * irc irc.synyx.de * * Sitz der Gesellschaft: Karlsruhe * Registergericht: Mannheim * Handelsregisternummer: HRA 4793 * USt-IdNr.: DE249264296 * * Komplementärin: Elatech Verwaltungs GmbH * Sitz der Gesellschaft: Karlsruhe * Geschäftsführer: Markus Daniel * Registergericht: Mannheim * Handelsregisternummer: HRB 7250 */ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFLInl7A6KmbVkuXQkRAgWsAJ9aeZuOX+3l1gveWjF7BGH6zys06gCfXuMe TBkY5gFJ/xSK5KEeEFj9Ggk= =vYgI -END PGP SIGNATURE- - To unsubscribe, e-mail: dev-unsubscr...@openoffice.org For additional commands, e-mail: dev-h...@openoffice.org
Re: [dev] StarOffice3.1 executing macros from the command line
Markus Daniel wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello, this is not really an OpenOffice-Issue but I am running out of ideas... I am trying to convert old StarOffice3.1 Documents in PDFs. I cannot use OpenOffice because the formatting of the documents will be destroid (tested with OpenOffice 1.0.3). With OpenOffice I called a macro from the commandline like (all on Windows) soffice.exe macro:///lib.module.macro1 this works fine but soffice3.exe macro:///lib.module.macro1 with StarOffice3.1 doesn't work I tried a lot of possibilities nothing works. It looks like StarOffice3 was not able to execute macros from the commandline. Is this true? Is a install version of StarOffice3.1 somewhere available? I don't think so, at least not if you want to avoid illegal copies. Besides that, AFAIR there was no PDF export in SO3, so all you can do with it is converting the documents into SO5 binary format. This can be done in batch processing using the built-in document converter. Then you can use OOo1.x to load the SO5 documents and export to PDF. OOo1.x is the closest match for the SO binary format. Perhaps you can find an SO5 copy somewhere (as this was available as a free download at some point in time) and - if you are lucky - this version handles your SO3 documents properly. Regards, Mathias -- Mathias Bauer (mba) - Project Lead OpenOffice.org Writer OpenOffice.org Engineering at Sun: http://blogs.sun.com/GullFOSS Please don't reply to nospamfor...@gmx.de. I use it for the OOo lists and only rarely read other mails sent to it. - To unsubscribe, e-mail: dev-unsubscr...@openoffice.org For additional commands, e-mail: dev-h...@openoffice.org
[dev] StarOffice3.1 executing macros from the command line
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello, this is not really an OpenOffice-Issue but I am running out of ideas... I am trying to convert old StarOffice3.1 Documents in PDFs. I cannot use OpenOffice because the formatting of the documents will be destroid (tested with OpenOffice 1.0.3). With OpenOffice I called a macro from the commandline like (all on Windows) soffice.exe macro:///lib.module.macro1 this works fine but soffice3.exe macro:///lib.module.macro1 with StarOffice3.1 doesn't work I tried a lot of possibilities nothing works. It looks like StarOffice3 was not able to execute macros from the commandline. Is this true? Is a install version of StarOffice3.1 somewhere available? Thanks a lot. Kind regards. Markus - -- /** * Markus Daniel * Bachelor of Science * * Synyx GmbH Co. KG * OpenSource Solutions * Karlstr. 68 * 76137 Karlsruhe * * phone +49(0)721 66 48 79 31 * fax +49(0)721 66 48 877 * eMail markus.dan...@synyx.de * www http://www.synyx.de * skype synyx_daniel * irc irc.synyx.de * * Sitz der Gesellschaft: Karlsruhe * Registergericht: Mannheim * Handelsregisternummer: HRA 4793 * USt-IdNr.: DE249264296 * * Komplementärin: Elatech Verwaltungs GmbH * Sitz der Gesellschaft: Karlsruhe * Geschäftsführer: Markus Daniel * Registergericht: Mannheim * Handelsregisternummer: HRB 7250 */ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFLH9GzA6KmbVkuXQkRAis1AJ4zJdXG9CPoENs471f9CrBcgWFC/wCdGroR 1hFMSmSyhj98364PLjtvhxw= =Zenc -END PGP SIGNATURE- - To unsubscribe, e-mail: dev-unsubscr...@openoffice.org For additional commands, e-mail: dev-h...@openoffice.org