Re: [libreoffice-documentation] Calc Guide 7.0, Covers and master document
Jean, Must say, that was awesome! That kind of feedback would take me at least two weeks!! Thank you very much for that! As soon as I manage to take a look at the guide and apply your suggestions I will let everyone know! Best regards, Felipe Viggiano Em seg., 2 de nov. de 2020 às 04:48, Jean Weber escreveu: > Errors found in PDF on first pass through: > Figure 27 (page 47) is missing. > Top of page 92: the 3) does not line up with other numbers. > Page 94, under Find toolbar: the kust numbers do not line up. > Page 100: list does not restart at 1). > Page 104, bottom: style of intro sentence ("The data ranges may > include:") should be changed to keep with next paragraph so it goes to > top of next page. > Page 120, top: For consistency in headings, change D and P on "Data > Points" to d and p. > Page 138: Under "Method Two" the 1) does not line up with other list > numbers. > Page 142: The 3) does not line up with other list numbers. > Page 190: the bullet symbol for the first "Distributed" item is not > the same as all the other bullet symbols in that list. > Page 208, bottom: 6) is not in line with other numbers in the list. > Page 210, bottom: list numbers do not line up. > Page 213, bottom: list numbers do not line up. > Page 216-217, under Aligning images: list numbers do not line up. > Page 225, top: heading should probably be "More Printing Options dialog". > Page 225: list does not restart at 1. > Page 226, below Note: list item 1) does not line up with others. > Page 232: first list item 3) does not line up with others. > Page 253: Table 6 caption is not in Caption style. > Page 327, Figure 308 and its caption are missing from the PDF. > Page 334: list number 1) does not line up with others. > Page 336: Figure 317 and its caption are missing from the PDF. > Page 368 has a green symbol and a line under the figure. Need to remove. > Page 385: list numbers do not line up. > Page 403: list number 3) does not line up. > Page 421: list does not restart at 1. List numbers do not line up. > Page 427: Figure 432 is missing in PDF > Page 428:: The paragraph at the bottom should probably be in Numbered > List style and have a number. > Page 432-433: list numbers do not line up. > Page 435: list numbers before and after Fig 443 do not line up. > Page 450-451, 458-459, 465, 469: several figures (and captions) are > missing in PDF. > Pages 471-489 are blank in PDF, except for footers. > Page 490-491: Indentation of paragraphs, and space between Definition > term and first paragraph, are inconsistent. > Page 530: list numbers do not line up. > > Recommendations (not actually errors): > Page 107: I recommend moving some text from next 2 pages (paragraph at > bottom of p 108 and Tip, paragraph, and Note at top of page 109) to > the bottom of this page, to avoid the big blank space. > Page 150-151: I recommend moving steps 3) and 4) from page 151 to page > 150. If you do that, make some of the list items at the top of page > 152 "keep with next" . > Page 189, bottom: make first bullet point under Alignment tab "keep > with next" to move to next page. > Page 267, bottom: make paragraph "do no break" so it moves to the next > page. > Page 387: move steps 7,8,9 (and Note) to page 386. > Page 424: move steps from bottom of page to page 423, to avoid large > blank space. > Page 520: start macOS keyboard shortcuts on next page, so it's easier > for someone to print out if they want the list. Also, delete the H3 > repeat of the heading that's in the H2 just above. > > Jean > > > > On Mon, Nov 2, 2020 at 3:22 PM Jean Weber wrote: > > > > Felipe, > > I will take a look. I almost always find problems in the compiled > > version that everyone else missed. > > Jean > > > > On Mon, Nov 2, 2020 at 11:23 AM Felipe Viggiano > > wrote: > > > > > > Hello everyone, > > > > > > Just uploaded CG7012-Macros in the Published folder. > > > > > > Kees: > > > Thanks again for the effort, all of your suggestions were incorporated, > > > including the new Note paragraph. > > > > > > Steve: > > > Regarding Olivier's contribution to the chapter, I was able to > understand > > > everything that was explained, so I did not make any major > suggestions. The > > > only thing I did was adding a link to the Macro help page on the end > (the > > > previous link points straight to VBASupport Statement). > > > > > > About the Calc Guide: > > > Just uploaded a first version of the compiled Calc Guide on the > feedback > > > folder based. There are three versions: .odm, .odt, and .pdf. > > > I'm still working on it, but I put there in case anyone wants to take a > > > look and give some comments before the final version. > > > > > > Olivier: > > > The cover images on the .odm file were very heavy on my computer, so I > > > exported them to .png and re-inserted them back, but I don if this is > the > > > right way to manage this, is there any suggestion? > > > > > > Have a great week everyone! > > > > > > Best regards, > > > Felipe Viggiano > >
Re: [libreoffice-documentation] Calc Guide 7.0, Covers and master document
Errors found in PDF on first pass through: Figure 27 (page 47) is missing. Top of page 92: the 3) does not line up with other numbers. Page 94, under Find toolbar: the kust numbers do not line up. Page 100: list does not restart at 1). Page 104, bottom: style of intro sentence ("The data ranges may include:") should be changed to keep with next paragraph so it goes to top of next page. Page 120, top: For consistency in headings, change D and P on "Data Points" to d and p. Page 138: Under "Method Two" the 1) does not line up with other list numbers. Page 142: The 3) does not line up with other list numbers. Page 190: the bullet symbol for the first "Distributed" item is not the same as all the other bullet symbols in that list. Page 208, bottom: 6) is not in line with other numbers in the list. Page 210, bottom: list numbers do not line up. Page 213, bottom: list numbers do not line up. Page 216-217, under Aligning images: list numbers do not line up. Page 225, top: heading should probably be "More Printing Options dialog". Page 225: list does not restart at 1. Page 226, below Note: list item 1) does not line up with others. Page 232: first list item 3) does not line up with others. Page 253: Table 6 caption is not in Caption style. Page 327, Figure 308 and its caption are missing from the PDF. Page 334: list number 1) does not line up with others. Page 336: Figure 317 and its caption are missing from the PDF. Page 368 has a green symbol and a line under the figure. Need to remove. Page 385: list numbers do not line up. Page 403: list number 3) does not line up. Page 421: list does not restart at 1. List numbers do not line up. Page 427: Figure 432 is missing in PDF Page 428:: The paragraph at the bottom should probably be in Numbered List style and have a number. Page 432-433: list numbers do not line up. Page 435: list numbers before and after Fig 443 do not line up. Page 450-451, 458-459, 465, 469: several figures (and captions) are missing in PDF. Pages 471-489 are blank in PDF, except for footers. Page 490-491: Indentation of paragraphs, and space between Definition term and first paragraph, are inconsistent. Page 530: list numbers do not line up. Recommendations (not actually errors): Page 107: I recommend moving some text from next 2 pages (paragraph at bottom of p 108 and Tip, paragraph, and Note at top of page 109) to the bottom of this page, to avoid the big blank space. Page 150-151: I recommend moving steps 3) and 4) from page 151 to page 150. If you do that, make some of the list items at the top of page 152 "keep with next" . Page 189, bottom: make first bullet point under Alignment tab "keep with next" to move to next page. Page 267, bottom: make paragraph "do no break" so it moves to the next page. Page 387: move steps 7,8,9 (and Note) to page 386. Page 424: move steps from bottom of page to page 423, to avoid large blank space. Page 520: start macOS keyboard shortcuts on next page, so it's easier for someone to print out if they want the list. Also, delete the H3 repeat of the heading that's in the H2 just above. Jean On Mon, Nov 2, 2020 at 3:22 PM Jean Weber wrote: > > Felipe, > I will take a look. I almost always find problems in the compiled > version that everyone else missed. > Jean > > On Mon, Nov 2, 2020 at 11:23 AM Felipe Viggiano > wrote: > > > > Hello everyone, > > > > Just uploaded CG7012-Macros in the Published folder. > > > > Kees: > > Thanks again for the effort, all of your suggestions were incorporated, > > including the new Note paragraph. > > > > Steve: > > Regarding Olivier's contribution to the chapter, I was able to understand > > everything that was explained, so I did not make any major suggestions. The > > only thing I did was adding a link to the Macro help page on the end (the > > previous link points straight to VBASupport Statement). > > > > About the Calc Guide: > > Just uploaded a first version of the compiled Calc Guide on the feedback > > folder based. There are three versions: .odm, .odt, and .pdf. > > I'm still working on it, but I put there in case anyone wants to take a > > look and give some comments before the final version. > > > > Olivier: > > The cover images on the .odm file were very heavy on my computer, so I > > exported them to .png and re-inserted them back, but I don if this is the > > right way to manage this, is there any suggestion? > > > > Have a great week everyone! > > > > Best regards, > > Felipe Viggiano > > > > Em sáb., 31 de out. de 2020 às 16:59, Felipe Viggiano < > > felipeviggi...@gmail.com> escreveu: > > > > > Thanks once again Steve, > > > > > > So I'm going to proceed in that direction and start to compile the > > > chapters in one using Olivier's .odm file. > > > As soon as I manage to get all the chapters together I let you know. > > > > > > Best regards, > > > Felipe Viggiano > > > > > > Em sex., 30 de out. de 2020 às 06:54, Steve Fanning < > > > stevefann...@libreoffice.org> escreveu: > > > > > >> Hi Felipe, > > >>
Re: [libreoffice-documentation] Calc Guide 7.0, Covers and master document
Felipe, I will take a look. I almost always find problems in the compiled version that everyone else missed. Jean On Mon, Nov 2, 2020 at 11:23 AM Felipe Viggiano wrote: > > Hello everyone, > > Just uploaded CG7012-Macros in the Published folder. > > Kees: > Thanks again for the effort, all of your suggestions were incorporated, > including the new Note paragraph. > > Steve: > Regarding Olivier's contribution to the chapter, I was able to understand > everything that was explained, so I did not make any major suggestions. The > only thing I did was adding a link to the Macro help page on the end (the > previous link points straight to VBASupport Statement). > > About the Calc Guide: > Just uploaded a first version of the compiled Calc Guide on the feedback > folder based. There are three versions: .odm, .odt, and .pdf. > I'm still working on it, but I put there in case anyone wants to take a > look and give some comments before the final version. > > Olivier: > The cover images on the .odm file were very heavy on my computer, so I > exported them to .png and re-inserted them back, but I don if this is the > right way to manage this, is there any suggestion? > > Have a great week everyone! > > Best regards, > Felipe Viggiano > > Em sáb., 31 de out. de 2020 às 16:59, Felipe Viggiano < > felipeviggi...@gmail.com> escreveu: > > > Thanks once again Steve, > > > > So I'm going to proceed in that direction and start to compile the > > chapters in one using Olivier's .odm file. > > As soon as I manage to get all the chapters together I let you know. > > > > Best regards, > > Felipe Viggiano > > > > Em sex., 30 de out. de 2020 às 06:54, Steve Fanning < > > stevefann...@libreoffice.org> escreveu: > > > >> Hi Felipe, > >> > >> With regards to a possible Toolbars appendix, I'm not sure much has > >> changed since August 31st, when I wrote: "I have concluded that at this > >> stage, including such an appendix in the guide might do more harm than > >> good. Consequently, my current intention is to progress the 7.0 Calc > >> Guide without a Toolbars appendix.". I would still be in favour of NOT > >> trying to include it in the CG at this time. > >> > >> I am in favour of publishing now, with one review as you suggest. My > >> only slight concern might be Chapter 12 (Macros), only because I believe > >> that Olivier made some significant changes (including new material) at > >> first review. If it would help, I would be happy to review the new > >> material before issue. > >> > >> Regards, > >> > >> Steve > >> > >> > >> On 30/10/2020 04:23, Felipe Viggiano wrote: > >> > Thank you very much for that Olivier! > >> > > >> > Updates on the Calc Guide 7.0: > >> > > >> > The chapters CG7010-LinkingData and CG-7011-SharingAndReviewing are now > >> on > >> > the Published folder after 2 reviews. > >> > The chapters CG-7015-KeyboardShortcuts and CG7016-ErrorCodes are now on > >> the > >> > Draft folder ready for a second review. > >> > > >> > > >> > I would like to raise a few questions about the Calc Guide publishing: > >> > > >> > i. How are we on the Toolbar appendix? Are they already mandatory for > >> the > >> > guides in this 7.0? > >> > ii. Considering Steve's fine job in the previous version, and that we > >> are > >> > closer to a LO 7.1 release, I'm thinking in start publishing the > >> chapters > >> > with at least one review. In this case, we can start working on the 7.1 > >> > Calc Guide immediately. If anyone could comment on this matter would be > >> > great! > >> > > >> > Best regards, > >> > Felipe Viggiano > >> > > >> > > >> > Em qui., 29 de out. de 2020 às 19:18, Olivier Hallot < > >> > olivier.hal...@libreoffice.org> escreveu: > >> > > >> >> Hello Team > >> >> > >> >> I added the file CG70-CalcGuide-Master-OH.odm in the Feedback folder > >> for > >> >> further work. > >> >> > >> >> * The covers were updated tp 7.0 > >> >> * new 7.0 template applied to master document. > >> >> > >> >> On opening the file, LO will ask to update the links. As master > >> >> document, the links must be reworked at publication time. I'll refrain > >> >> to update fields, ToCs, Indexes and links until all chapters are in > >> >> published folder. > >> >> > >> >> Cheers > >> >> -- > >> >> Olivier Hallot > >> >> LibreOffice Documentation Coordinator > >> >> Rio de Janeiro - Brasil - Local Time: UTC-03:00 > >> >> LibreOffice – free and open source office suite: > >> >> https://www.libreoffice.org > >> >> Respects your privacy, and gives you back control over your data > >> >> http://tdf.io/joinus > >> >> -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
Re: [libreoffice-documentation] Calc Guide 7.0, Covers and master document
Hello everyone, Just uploaded CG7012-Macros in the Published folder. Kees: Thanks again for the effort, all of your suggestions were incorporated, including the new Note paragraph. Steve: Regarding Olivier's contribution to the chapter, I was able to understand everything that was explained, so I did not make any major suggestions. The only thing I did was adding a link to the Macro help page on the end (the previous link points straight to VBASupport Statement). About the Calc Guide: Just uploaded a first version of the compiled Calc Guide on the feedback folder based. There are three versions: .odm, .odt, and .pdf. I'm still working on it, but I put there in case anyone wants to take a look and give some comments before the final version. Olivier: The cover images on the .odm file were very heavy on my computer, so I exported them to .png and re-inserted them back, but I don if this is the right way to manage this, is there any suggestion? Have a great week everyone! Best regards, Felipe Viggiano Em sáb., 31 de out. de 2020 às 16:59, Felipe Viggiano < felipeviggi...@gmail.com> escreveu: > Thanks once again Steve, > > So I'm going to proceed in that direction and start to compile the > chapters in one using Olivier's .odm file. > As soon as I manage to get all the chapters together I let you know. > > Best regards, > Felipe Viggiano > > Em sex., 30 de out. de 2020 às 06:54, Steve Fanning < > stevefann...@libreoffice.org> escreveu: > >> Hi Felipe, >> >> With regards to a possible Toolbars appendix, I'm not sure much has >> changed since August 31st, when I wrote: "I have concluded that at this >> stage, including such an appendix in the guide might do more harm than >> good. Consequently, my current intention is to progress the 7.0 Calc >> Guide without a Toolbars appendix.". I would still be in favour of NOT >> trying to include it in the CG at this time. >> >> I am in favour of publishing now, with one review as you suggest. My >> only slight concern might be Chapter 12 (Macros), only because I believe >> that Olivier made some significant changes (including new material) at >> first review. If it would help, I would be happy to review the new >> material before issue. >> >> Regards, >> >> Steve >> >> >> On 30/10/2020 04:23, Felipe Viggiano wrote: >> > Thank you very much for that Olivier! >> > >> > Updates on the Calc Guide 7.0: >> > >> > The chapters CG7010-LinkingData and CG-7011-SharingAndReviewing are now >> on >> > the Published folder after 2 reviews. >> > The chapters CG-7015-KeyboardShortcuts and CG7016-ErrorCodes are now on >> the >> > Draft folder ready for a second review. >> > >> > >> > I would like to raise a few questions about the Calc Guide publishing: >> > >> > i. How are we on the Toolbar appendix? Are they already mandatory for >> the >> > guides in this 7.0? >> > ii. Considering Steve's fine job in the previous version, and that we >> are >> > closer to a LO 7.1 release, I'm thinking in start publishing the >> chapters >> > with at least one review. In this case, we can start working on the 7.1 >> > Calc Guide immediately. If anyone could comment on this matter would be >> > great! >> > >> > Best regards, >> > Felipe Viggiano >> > >> > >> > Em qui., 29 de out. de 2020 às 19:18, Olivier Hallot < >> > olivier.hal...@libreoffice.org> escreveu: >> > >> >> Hello Team >> >> >> >> I added the file CG70-CalcGuide-Master-OH.odm in the Feedback folder >> for >> >> further work. >> >> >> >> * The covers were updated tp 7.0 >> >> * new 7.0 template applied to master document. >> >> >> >> On opening the file, LO will ask to update the links. As master >> >> document, the links must be reworked at publication time. I'll refrain >> >> to update fields, ToCs, Indexes and links until all chapters are in >> >> published folder. >> >> >> >> Cheers >> >> -- >> >> Olivier Hallot >> >> LibreOffice Documentation Coordinator >> >> Rio de Janeiro - Brasil - Local Time: UTC-03:00 >> >> LibreOffice – free and open source office suite: >> >> https://www.libreoffice.org >> >> Respects your privacy, and gives you back control over your data >> >> http://tdf.io/joinus >> >> >> >> -- >> >> To unsubscribe e-mail to: >> documentation+unsubscr...@global.libreoffice.org >> >> Problems? >> >> https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ >> >> Posting guidelines + more: >> https://wiki.documentfoundation.org/Netiquette >> >> List archive: >> https://listarchives.libreoffice.org/global/documentation/ >> >> Privacy Policy: https://www.documentfoundation.org/privacy >> >> >> >> -- >> To unsubscribe e-mail to: >> documentation+unsubscr...@global.libreoffice.org >> Problems? >> https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ >> Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette >> List archive: https://listarchives.libreoffice.org/global/documentation/ >> Privacy Policy: https://www.documentfoundation.org/privacy >> > -- To unsubscribe e-mail
Re: [libreoffice-documentation] Calc Guide 7.0, Covers and master document
Thanks once again Steve, So I'm going to proceed in that direction and start to compile the chapters in one using Olivier's .odm file. As soon as I manage to get all the chapters together I let you know. Best regards, Felipe Viggiano Em sex., 30 de out. de 2020 às 06:54, Steve Fanning < stevefann...@libreoffice.org> escreveu: > Hi Felipe, > > With regards to a possible Toolbars appendix, I'm not sure much has > changed since August 31st, when I wrote: "I have concluded that at this > stage, including such an appendix in the guide might do more harm than > good. Consequently, my current intention is to progress the 7.0 Calc > Guide without a Toolbars appendix.". I would still be in favour of NOT > trying to include it in the CG at this time. > > I am in favour of publishing now, with one review as you suggest. My > only slight concern might be Chapter 12 (Macros), only because I believe > that Olivier made some significant changes (including new material) at > first review. If it would help, I would be happy to review the new > material before issue. > > Regards, > > Steve > > > On 30/10/2020 04:23, Felipe Viggiano wrote: > > Thank you very much for that Olivier! > > > > Updates on the Calc Guide 7.0: > > > > The chapters CG7010-LinkingData and CG-7011-SharingAndReviewing are now > on > > the Published folder after 2 reviews. > > The chapters CG-7015-KeyboardShortcuts and CG7016-ErrorCodes are now on > the > > Draft folder ready for a second review. > > > > > > I would like to raise a few questions about the Calc Guide publishing: > > > > i. How are we on the Toolbar appendix? Are they already mandatory for the > > guides in this 7.0? > > ii. Considering Steve's fine job in the previous version, and that we are > > closer to a LO 7.1 release, I'm thinking in start publishing the chapters > > with at least one review. In this case, we can start working on the 7.1 > > Calc Guide immediately. If anyone could comment on this matter would be > > great! > > > > Best regards, > > Felipe Viggiano > > > > > > Em qui., 29 de out. de 2020 às 19:18, Olivier Hallot < > > olivier.hal...@libreoffice.org> escreveu: > > > >> Hello Team > >> > >> I added the file CG70-CalcGuide-Master-OH.odm in the Feedback folder for > >> further work. > >> > >> * The covers were updated tp 7.0 > >> * new 7.0 template applied to master document. > >> > >> On opening the file, LO will ask to update the links. As master > >> document, the links must be reworked at publication time. I'll refrain > >> to update fields, ToCs, Indexes and links until all chapters are in > >> published folder. > >> > >> Cheers > >> -- > >> Olivier Hallot > >> LibreOffice Documentation Coordinator > >> Rio de Janeiro - Brasil - Local Time: UTC-03:00 > >> LibreOffice – free and open source office suite: > >> https://www.libreoffice.org > >> Respects your privacy, and gives you back control over your data > >> http://tdf.io/joinus > >> > >> -- > >> To unsubscribe e-mail to: > documentation+unsubscr...@global.libreoffice.org > >> Problems? > >> https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ > >> Posting guidelines + more: > https://wiki.documentfoundation.org/Netiquette > >> List archive: > https://listarchives.libreoffice.org/global/documentation/ > >> Privacy Policy: https://www.documentfoundation.org/privacy > >> > > -- > To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org > Problems? > https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ > Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette > List archive: https://listarchives.libreoffice.org/global/documentation/ > Privacy Policy: https://www.documentfoundation.org/privacy > -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
Re: [libreoffice-documentation] Calc Guide 7.0, Covers and master document
Hi Felipe, With regards to a possible Toolbars appendix, I'm not sure much has changed since August 31st, when I wrote: "I have concluded that at this stage, including such an appendix in the guide might do more harm than good. Consequently, my current intention is to progress the 7.0 Calc Guide without a Toolbars appendix.". I would still be in favour of NOT trying to include it in the CG at this time. I am in favour of publishing now, with one review as you suggest. My only slight concern might be Chapter 12 (Macros), only because I believe that Olivier made some significant changes (including new material) at first review. If it would help, I would be happy to review the new material before issue. Regards, Steve On 30/10/2020 04:23, Felipe Viggiano wrote: Thank you very much for that Olivier! Updates on the Calc Guide 7.0: The chapters CG7010-LinkingData and CG-7011-SharingAndReviewing are now on the Published folder after 2 reviews. The chapters CG-7015-KeyboardShortcuts and CG7016-ErrorCodes are now on the Draft folder ready for a second review. I would like to raise a few questions about the Calc Guide publishing: i. How are we on the Toolbar appendix? Are they already mandatory for the guides in this 7.0? ii. Considering Steve's fine job in the previous version, and that we are closer to a LO 7.1 release, I'm thinking in start publishing the chapters with at least one review. In this case, we can start working on the 7.1 Calc Guide immediately. If anyone could comment on this matter would be great! Best regards, Felipe Viggiano Em qui., 29 de out. de 2020 às 19:18, Olivier Hallot < olivier.hal...@libreoffice.org> escreveu: Hello Team I added the file CG70-CalcGuide-Master-OH.odm in the Feedback folder for further work. * The covers were updated tp 7.0 * new 7.0 template applied to master document. On opening the file, LO will ask to update the links. As master document, the links must be reworked at publication time. I'll refrain to update fields, ToCs, Indexes and links until all chapters are in published folder. Cheers -- Olivier Hallot LibreOffice Documentation Coordinator Rio de Janeiro - Brasil - Local Time: UTC-03:00 LibreOffice – free and open source office suite: https://www.libreoffice.org Respects your privacy, and gives you back control over your data http://tdf.io/joinus -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
Re: [libreoffice-documentation] Calc Guide 7.0, Covers and master document
Thank you very much for that Olivier! Updates on the Calc Guide 7.0: The chapters CG7010-LinkingData and CG-7011-SharingAndReviewing are now on the Published folder after 2 reviews. The chapters CG-7015-KeyboardShortcuts and CG7016-ErrorCodes are now on the Draft folder ready for a second review. I would like to raise a few questions about the Calc Guide publishing: i. How are we on the Toolbar appendix? Are they already mandatory for the guides in this 7.0? ii. Considering Steve's fine job in the previous version, and that we are closer to a LO 7.1 release, I'm thinking in start publishing the chapters with at least one review. In this case, we can start working on the 7.1 Calc Guide immediately. If anyone could comment on this matter would be great! Best regards, Felipe Viggiano Em qui., 29 de out. de 2020 às 19:18, Olivier Hallot < olivier.hal...@libreoffice.org> escreveu: > Hello Team > > I added the file CG70-CalcGuide-Master-OH.odm in the Feedback folder for > further work. > > * The covers were updated tp 7.0 > * new 7.0 template applied to master document. > > On opening the file, LO will ask to update the links. As master > document, the links must be reworked at publication time. I'll refrain > to update fields, ToCs, Indexes and links until all chapters are in > published folder. > > Cheers > -- > Olivier Hallot > LibreOffice Documentation Coordinator > Rio de Janeiro - Brasil - Local Time: UTC-03:00 > LibreOffice – free and open source office suite: > https://www.libreoffice.org > Respects your privacy, and gives you back control over your data > http://tdf.io/joinus > > -- > To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org > Problems? > https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ > Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette > List archive: https://listarchives.libreoffice.org/global/documentation/ > Privacy Policy: https://www.documentfoundation.org/privacy > -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
[libreoffice-documentation] Calc Guide 7.0 Coordination
Hello everyone, Sorry but I've been a little busy in the past weeks and I was not able to contribute more with the team. About the Calc Guide 7.0, I can see that we do not have a new coordinator since Steve, in that case, can I volunteer myself for the job at least until the publication of this version? As I can see the work to be done is to finish the reviews and change the template for the reviewed chapters. Am I missing something? Best regards, Felipe Viggiano -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
Re: [libreoffice-documentation] Calc Guide 7.0
Thank you, Steve, I'll send it further. Milos On 7/6/20 11:42 PM, Steve (GMail) wrote: > Hi Milos, > > I have added an extra zip file in the 6.4 Calc Guide's Archive folder. > This file contains spreadsheets that could be used to generate many of > the figures in Chapter 3 that show examples of different chart types. > > It is possible that these spreadsheets may be useful to you (or your > colleagues) if you wish to localize any of those figures. > > Regards, > > Steve > > > -- Original Message -- > From: "Milos Sramek" <mailto:sramek.mi...@gmail.com>> > To: "Steve (GMail)" <mailto:stevemfanning...@gmail.com>>; "Documentation Team" > <mailto:Documentation@global.libreoffice.org>> > Sent: 02/07/2020 11:38:48 > Subject: Re: [libreoffice-documentation] Calc Guide 7.0 > >> Hi Steve, >> thank you! >> I will send the zip file to the guy who is going to prepare the >> screenshots >> >> I have uploaded a new version VG64-2.tgz of the cleaned odt files. In >> translation we have noticed that incorrect quotation marks were used >> in the text (the machine ones "" instead of the typographic ones “” >> ). The "machine" ones should be used only in the code snippets. >> Regards >> Milos >> >> >> On 7/2/20 11:12 AM, Steve (GMail) wrote: >>> Hi Milos, >>> >>> I am finding it hard to anticipate exactly which spreadsheet files >>> you might need but have placed a ZIP file in your SK community >>> folder within Nextcloud. This archive file contains 27 of the >>> spreadsheets that you might need. I assume that you will be able to >>> move the spreadsheet files somewhere suitable and then delete the >>> ZIP. (For the record, I have also placed it in the relevant Archive >>> folder in the Documentation Team's part of Nextcloud.) >>> >>> Please let me know if there are any other significant spreadsheets >>> used in the Calc Guide that are needed to help with translation >>> activities. >>> >>> Regards, >>> >>> Steve >>> >>> >>> -- Original Message -- >>> From: "Milos Sramek" >>> To: "Steve (GMail)" >>> Sent: 01/07/2020 18:02:09 >>> Subject: Re: [libreoffice-documentation] Calc Guide 7.0 >>> >>>> Thank you Steve! I did no know that there a such groups. I added bot. >>>> Milos >>>> >>>> On 7/1/20 2:35 PM, Steve (GMail) wrote: >>>>> Hi Milos, “” >>>>> >>>>> I'm sorry but I still can't see the folder containing the updated >>>>> files. For what it's worth, I am a member of the "odfauthors" and >>>>> "users" groups in Nextcloud. >>>>> >>>>> With regards to the ODS spreadsheets used for generating Calc Guide >>>>> figures, I definitely have some of them, and there will be others in >>>>> NextCloud. Please give me a few days and I'll collect together as >>>>> many >>>>> of them as I can. >>>>> >>>>> Regards, >>>>> >>>>> Steve >>>>> >>>>> >>>>> >>>>> >>>>> -- Original Message -- >>>>> From: "Milos Sramek" >>>>> To: "Steve (GMail)" >>>>> Cc: "Gordon Bates" ; "Documentation Team" >>>>> >>>>> Sent: 01/07/2020 11:53:35 >>>>> Subject: Re: [libreoffice-documentation] Calc Guide 7.0 >>>>> >>>>>> Hi Steve, >>>>>> I forgot to share the folder with you, sorry. I've just shared >>>>>> it with >>>>>> the group tdf-members, and I hope the rights are inherited, please >>>>>> check. >>>>>> The original ODS files would be great. I ho[ped that you have >>>>>> them, if >>>>>> not I will ask in a new post. >>>>>> thanks >>>>>> Milos >>>>>> >>>>>> On 7/1/20 9:44 AM, Steve (GMail) wrote: >>>>>>> Hi Milos, >>>>>>> Many thanks for that work. >>>>>>> Unfortunately I have logged into Nextcloud and couldn't find a >>>>>>> subfolder called SK community within the Shared folder. So I >>>>>>> can't see >>>>&
Re[2]: [libreoffice-documentation] Calc Guide 7.0
Hi Milos, I have added an extra zip file in the 6.4 Calc Guide's Archive folder. This file contains spreadsheets that could be used to generate many of the figures in Chapter 3 that show examples of different chart types. It is possible that these spreadsheets may be useful to you (or your colleagues) if you wish to localize any of those figures. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" ; "Documentation Team" Sent: 02/07/2020 11:38:48 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi Steve, thank you! I will send the zip file to the guy who is going to prepare the screenshots I have uploaded a new version VG64-2.tgz of the cleaned odt files. In translation we have noticed that incorrect quotation marks were used in the text (the machine ones "" instead of the typographic ones “” ). The "machine" ones should be used only in the code snippets. Regards Milos On 7/2/20 11:12 AM, Steve (GMail) wrote: Hi Milos, I am finding it hard to anticipate exactly which spreadsheet files you might need but have placed a ZIP file in your SK community folder within Nextcloud. This archive file contains 27 of the spreadsheets that you might need. I assume that you will be able to move the spreadsheet files somewhere suitable and then delete the ZIP. (For the record, I have also placed it in the relevant Archive folder in the Documentation Team's part of Nextcloud.) Please let me know if there are any other significant spreadsheets used in the Calc Guide that are needed to help with translation activities. Regards, Steve -- Original Message -- From: "Milos Sramek" <mailto:sramek.mi...@gmail.com> To: "Steve (GMail)" <mailto:stevemfanning...@gmail.com> Sent: 01/07/2020 18:02:09 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Thank you Steve! I did no know that there a such groups. I added bot. Milos On 7/1/20 2:35 PM, Steve (GMail) wrote: Hi Milos, “” I'm sorry but I still can't see the folder containing the updated files. For what it's worth, I am a member of the "odfauthors" and "users" groups in Nextcloud. With regards to the ODS spreadsheets used for generating Calc Guide figures, I definitely have some of them, and there will be others in NextCloud. Please give me a few days and I'll collect together as many of them as I can. Regards, Steve -- Original Message -- From: "Milos Sramek" <mailto:sramek.mi...@gmail.com> To: "Steve (GMail)" <mailto:stevemfanning...@gmail.com> Cc: "Gordon Bates" <mailto:berrykevin...@gmail.com>; "Documentation Team" <mailto:Documentation@global.libreoffice.org> Sent: 01/07/2020 11:53:35 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi Steve, I forgot to share the folder with you, sorry. I've just shared it with the group tdf-members, and I hope the rights are inherited, please check. The original ODS files would be great. I ho[ped that you have them, if not I will ask in a new post. thanks Milos On 7/1/20 9:44 AM, Steve (GMail) wrote: Hi Milos, Many thanks for that work. Unfortunately I have logged into Nextcloud and couldn't find a subfolder called SK community within the Shared folder. So I can't see the updated files. When I can access the updated files, then I intend to use them as the basis for the 7.0 update. I also don't have a problem using them to replace the published 6.4 files. With regards to the screenshots, I assume that you would like the original ODS files that were used? If so, I'll investigate. Regards, Steve -- Original Message -- From: "Milos Sramek" <mailto:sramek.mi...@gmail.com> To: "Steve (GMail)" <mailto:stevemfanning...@gmail.com>; "Gordon Bates" <mailto:berrykevin...@gmail.com>; "Documentation Team" <mailto:Documentation@global.libreoffice.org> Sent: 01/07/2020 08:12:00 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi, the cleaned files are on Nextcloud in Shared/SK community/Cleaned/CG64.tgz https://nextcloud.documentfoundation.org/apps/files/?dir=/Shared/SK community/Cleaned I've changed a few direct formattings to styles and removed all direct formatting by my script. Then, I've compared the cleaned documents to the originals for any accidental changes (none found). It would be good if the published CG files were replaced by the cleaned ones and also if they were used as a start for CG70. In the text there are numerous screen shots which show content of example spreadsheets. It would help the translators if these were available, too. Would it be possible? cheers Milos On 6/26/20 9:37 AM, Steve (GMail) wrote: Hi Milos, Tha
Re: [libreoffice-documentation] Calc Guide 7.0
Hi Steve, sure, let them be as they are. From the point of view of English the change is nearly invisible. I will fix it again once the 7.0 version is finished regards Milos n 7/2/20 1:39 PM, Steve (GMail) wrote: > Hi Milos, > > I'm a little worried about updating the published 6.4 Calc Guide files > again, because I've already taken a copy and started making some 7.0 > changes to the "cleaned" files that you sent yesterday! (I assumed you > had finished cleaning them) > > Would it be possible to leave the published files as they are now? If > you tell me which files contained the wrong quotation marks, I’ll make > sure they are put right in the 7.0 versions of the files. And I'll do > the same for any other translation-related issues that you highlight > later. > > Meantime, you can translate whichever versions of the 6.4 files are > appropriate for your purpose. > > Regards, > > Steve > > > -- Original Message -- > From: "Milos Sramek" > To: "Steve (GMail)" ; "Documentation Team" > > Sent: 02/07/2020 11:38:48 > Subject: Re: [libreoffice-documentation] Calc Guide 7.0 > >> Hi Steve, >> thank you! >> I will send the zip file to the guy who is going to prepare the >> screenshots >> >> I have uploaded a new version VG64-2.tgz of the cleaned odt files. In >> translation we have noticed that incorrect quotation marks were used >> in the text (the machine ones "" instead of the typographic ones “” >> ). The "machine" ones should be used only in the code snippets. >> Regards >> Milos >> >> >> On 7/2/20 11:12 AM, Steve (GMail) wrote: >>> Hi Milos, >>> >>> I am finding it hard to anticipate exactly which spreadsheet files >>> you might need but have placed a ZIP file in your SK community >>> folder within Nextcloud. This archive file contains 27 of the >>> spreadsheets that you might need. I assume that you will be able to >>> move the spreadsheet files somewhere suitable and then delete the >>> ZIP. (For the record, I have also placed it in the relevant Archive >>> folder in the Documentation Team's part of Nextcloud.) >>> >>> Please let me know if there are any other significant spreadsheets >>> used in the Calc Guide that are needed to help with translation >>> activities. >>> >>> Regards, >>> >>> Steve >>> >>> >>> -- Original Message -- >>> From: "Milos Sramek" >>> <mailto:sramek.mi...@gmail.com> >>> To: "Steve (GMail)" >>> <mailto:stevemfanning...@gmail.com> >>> Sent: 01/07/2020 18:02:09 >>> Subject: Re: [libreoffice-documentation] Calc Guide 7.0 >>> >>>> Thank you Steve! I did no know that there a such groups. I added bot. >>>> Milos >>>> >>>> On 7/1/20 2:35 PM, Steve (GMail) wrote: >>>>> Hi Milos, “” >>>>> >>>>> I'm sorry but I still can't see the folder containing the updated >>>>> files. For what it's worth, I am a member of the "odfauthors" and >>>>> "users" groups in Nextcloud. >>>>> >>>>> With regards to the ODS spreadsheets used for generating Calc Guide >>>>> figures, I definitely have some of them, and there will be others in >>>>> NextCloud. Please give me a few days and I'll collect together as >>>>> many >>>>> of them as I can. >>>>> >>>>> Regards, >>>>> >>>>> Steve >>>>> >>>>> >>>>> >>>>> >>>>> -- Original Message -- >>>>> From: "Milos Sramek" >>>>> <mailto:sramek.mi...@gmail.com> >>>>> To: "Steve (GMail)" >>>>> <mailto:stevemfanning...@gmail.com> >>>>> Cc: "Gordon Bates" >>>>> <mailto:berrykevin...@gmail.com>; "Documentation Team" >>>>> >>>>> <mailto:Documentation@global.libreoffice.org> >>>>> Sent: 01/07/2020 11:53:35 >>>>> Subject: Re: [libreoffice-documentation] Calc Guide 7.0 >>>>> >>>>>> Hi Steve, >>>>>> I forgot to share the folder with you, sorry. I've just shared >>>>>> it with >>>>>> the group tdf-members, and I hope the rights are inherited, please >>>>>>
Re: [libreoffice-documentation] Calc Guide 7.0
Hi Steve, thank you! I will send the zip file to the guy who is going to prepare the screenshots I have uploaded a new version VG64-2.tgz of the cleaned odt files. In translation we have noticed that incorrect quotation marks were used in the text (the machine ones "" instead of the typographic ones “” ). The "machine" ones should be used only in the code snippets. Regards Milos On 7/2/20 11:12 AM, Steve (GMail) wrote: > Hi Milos, > > I am finding it hard to anticipate exactly which spreadsheet files you > might need but have placed a ZIP file in your SK community folder > within Nextcloud. This archive file contains 27 of the spreadsheets > that you might need. I assume that you will be able to move the > spreadsheet files somewhere suitable and then delete the ZIP. (For the > record, I have also placed it in the relevant Archive folder in the > Documentation Team's part of Nextcloud.) > > Please let me know if there are any other significant spreadsheets > used in the Calc Guide that are needed to help with translation > activities. > > Regards, > > Steve > > > -- Original Message -- > From: "Milos Sramek" > To: "Steve (GMail)" > Sent: 01/07/2020 18:02:09 > Subject: Re: [libreoffice-documentation] Calc Guide 7.0 > >> Thank you Steve! I did no know that there a such groups. I added bot. >> Milos >> >> On 7/1/20 2:35 PM, Steve (GMail) wrote: >>> Hi Milos, “” >>> >>> I'm sorry but I still can't see the folder containing the updated >>> files. For what it's worth, I am a member of the "odfauthors" and >>> "users" groups in Nextcloud. >>> >>> With regards to the ODS spreadsheets used for generating Calc Guide >>> figures, I definitely have some of them, and there will be others in >>> NextCloud. Please give me a few days and I'll collect together as many >>> of them as I can. >>> >>> Regards, >>> >>> Steve >>> >>> >>> >>> >>> -- Original Message -- >>> From: "Milos Sramek" >>> To: "Steve (GMail)" >>> Cc: "Gordon Bates" ; "Documentation Team" >>> >>> Sent: 01/07/2020 11:53:35 >>> Subject: Re: [libreoffice-documentation] Calc Guide 7.0 >>> >>>> Hi Steve, >>>> I forgot to share the folder with you, sorry. I've just shared it >>>> with >>>> the group tdf-members, and I hope the rights are inherited, please >>>> check. >>>> The original ODS files would be great. I ho[ped that you have >>>> them, if >>>> not I will ask in a new post. >>>> thanks >>>> Milos >>>> >>>> On 7/1/20 9:44 AM, Steve (GMail) wrote: >>>>> Hi Milos, >>>>> Many thanks for that work. >>>>> Unfortunately I have logged into Nextcloud and couldn't find a >>>>> subfolder called SK community within the Shared folder. So I >>>>> can't see >>>>> the updated files. >>>>> When I can access the updated files, then I intend to use them >>>>> as the >>>>> basis for the 7.0 update. I also don't have a problem using them to >>>>> replace the published 6.4 files. >>>>> With regards to the screenshots, I assume that you would like the >>>>> original ODS files that were used? If so, I'll investigate. >>>>> Regards, >>>>> Steve >>>>> >>>>> -- Original Message -- >>>>> From: "Milos Sramek" >>>>> To: "Steve (GMail)" ; "Gordon Bates" >>>>> ; "Documentation Team" >>>>> >>>>> Sent: 01/07/2020 08:12:00 >>>>> Subject: Re: [libreoffice-documentation] Calc Guide 7.0 >>>>> >>>>>> Hi, >>>>>> the cleaned files are on Nextcloud in Shared/SK >>>>>> community/Cleaned/CG64.tgz >>>>>> https://nextcloud.documentfoundation.org/apps/files/?dir=/Shared/SK >>>>>> community/Cleaned >>>>>> >>>>>> I've changed a few direct formattings to styles and removed all >>>>>> direct >>>>>> formatting by my script. Then, I've compared the cleaned >>>>>> documents to >>>>>> the originals for any accidental changes (none found). &g
Re[2]: [libreoffice-documentation] Calc Guide 7.0
Hi Milos, I'm a little worried about updating the published 6.4 Calc Guide files again, because I've already taken a copy and started making some 7.0 changes to the "cleaned" files that you sent yesterday! (I assumed you had finished cleaning them) Would it be possible to leave the published files as they are now? If you tell me which files contained the wrong quotation marks, I’ll make sure they are put right in the 7.0 versions of the files. And I'll do the same for any other translation-related issues that you highlight later. Meantime, you can translate whichever versions of the 6.4 files are appropriate for your purpose. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" ; "Documentation Team" Sent: 02/07/2020 11:38:48 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi Steve, thank you! I will send the zip file to the guy who is going to prepare the screenshots I have uploaded a new version VG64-2.tgz of the cleaned odt files. In translation we have noticed that incorrect quotation marks were used in the text (the machine ones "" instead of the typographic ones “” ). The "machine" ones should be used only in the code snippets. Regards Milos On 7/2/20 11:12 AM, Steve (GMail) wrote: Hi Milos, I am finding it hard to anticipate exactly which spreadsheet files you might need but have placed a ZIP file in your SK community folder within Nextcloud. This archive file contains 27 of the spreadsheets that you might need. I assume that you will be able to move the spreadsheet files somewhere suitable and then delete the ZIP. (For the record, I have also placed it in the relevant Archive folder in the Documentation Team's part of Nextcloud.) Please let me know if there are any other significant spreadsheets used in the Calc Guide that are needed to help with translation activities. Regards, Steve -- Original Message -- From: "Milos Sramek" <mailto:sramek.mi...@gmail.com> To: "Steve (GMail)" <mailto:stevemfanning...@gmail.com> Sent: 01/07/2020 18:02:09 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Thank you Steve! I did no know that there a such groups. I added bot. Milos On 7/1/20 2:35 PM, Steve (GMail) wrote: Hi Milos, “” I'm sorry but I still can't see the folder containing the updated files. For what it's worth, I am a member of the "odfauthors" and "users" groups in Nextcloud. With regards to the ODS spreadsheets used for generating Calc Guide figures, I definitely have some of them, and there will be others in NextCloud. Please give me a few days and I'll collect together as many of them as I can. Regards, Steve -- Original Message -- From: "Milos Sramek" <mailto:sramek.mi...@gmail.com> To: "Steve (GMail)" <mailto:stevemfanning...@gmail.com> Cc: "Gordon Bates" <mailto:berrykevin...@gmail.com>; "Documentation Team" <mailto:Documentation@global.libreoffice.org> Sent: 01/07/2020 11:53:35 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi Steve, I forgot to share the folder with you, sorry. I've just shared it with the group tdf-members, and I hope the rights are inherited, please check. The original ODS files would be great. I ho[ped that you have them, if not I will ask in a new post. thanks Milos On 7/1/20 9:44 AM, Steve (GMail) wrote: Hi Milos, Many thanks for that work. Unfortunately I have logged into Nextcloud and couldn't find a subfolder called SK community within the Shared folder. So I can't see the updated files. When I can access the updated files, then I intend to use them as the basis for the 7.0 update. I also don't have a problem using them to replace the published 6.4 files. With regards to the screenshots, I assume that you would like the original ODS files that were used? If so, I'll investigate. Regards, Steve -- Original Message -- From: "Milos Sramek" <mailto:sramek.mi...@gmail.com> To: "Steve (GMail)" <mailto:stevemfanning...@gmail.com>; "Gordon Bates" <mailto:berrykevin...@gmail.com>; "Documentation Team" <mailto:Documentation@global.libreoffice.org> Sent: 01/07/2020 08:12:00 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi, the cleaned files are on Nextcloud in Shared/SK community/Cleaned/CG64.tgz https://nextcloud.documentfoundation.org/apps/files/?dir=/Shared/SK community/Cleaned I've changed a few direct formattings to styles and removed all direct formatting by my script. Then, I've compared the cleaned documents to the originals for any accidental changes (none found). It would be good if the published CG files were replaced by the cleaned ones and al
Re[2]: [libreoffice-documentation] Calc Guide 7.0
Hi Milos, I am finding it hard to anticipate exactly which spreadsheet files you might need but have placed a ZIP file in your SK community folder within Nextcloud. This archive file contains 27 of the spreadsheets that you might need. I assume that you will be able to move the spreadsheet files somewhere suitable and then delete the ZIP. (For the record, I have also placed it in the relevant Archive folder in the Documentation Team's part of Nextcloud.) Please let me know if there are any other significant spreadsheets used in the Calc Guide that are needed to help with translation activities. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" Sent: 01/07/2020 18:02:09 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Thank you Steve! I did no know that there a such groups. I added bot. Milos On 7/1/20 2:35 PM, Steve (GMail) wrote: Hi Milos, I'm sorry but I still can't see the folder containing the updated files. For what it's worth, I am a member of the "odfauthors" and "users" groups in Nextcloud. With regards to the ODS spreadsheets used for generating Calc Guide figures, I definitely have some of them, and there will be others in NextCloud. Please give me a few days and I'll collect together as many of them as I can. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" Cc: "Gordon Bates" ; "Documentation Team" Sent: 01/07/2020 11:53:35 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi Steve, I forgot to share the folder with you, sorry. I've just shared it with the group tdf-members, and I hope the rights are inherited, please check. The original ODS files would be great. I ho[ped that you have them, if not I will ask in a new post. thanks Milos On 7/1/20 9:44 AM, Steve (GMail) wrote: Hi Milos, Many thanks for that work. Unfortunately I have logged into Nextcloud and couldn't find a subfolder called SK community within the Shared folder. So I can't see the updated files. When I can access the updated files, then I intend to use them as the basis for the 7.0 update. I also don't have a problem using them to replace the published 6.4 files. With regards to the screenshots, I assume that you would like the original ODS files that were used? If so, I'll investigate. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" ; "Gordon Bates" ; "Documentation Team" Sent: 01/07/2020 08:12:00 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi, the cleaned files are on Nextcloud in Shared/SK community/Cleaned/CG64.tgz https://nextcloud.documentfoundation.org/apps/files/?dir=/Shared/SK community/Cleaned I've changed a few direct formattings to styles and removed all direct formatting by my script. Then, I've compared the cleaned documents to the originals for any accidental changes (none found). It would be good if the published CG files were replaced by the cleaned ones and also if they were used as a start for CG70. In the text there are numerous screen shots which show content of example spreadsheets. It would help the translators if these were available, too. Would it be possible? cheers Milos On 6/26/20 9:37 AM, Steve (GMail) wrote: Hi Milos, That's great, I was intending to do the same but there's no point duplicating effort. Please advise when you are finished with the files. By the way, I am hoping that the re-introduction of the alphabetical index does not complicate translation. Please advise if this will cause any translation issues. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" ; "Gordon Bates" ; "Documentation Team" Sent: 26/06/2020 08:26:01 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi, now that CG64 is finished, I would like to check style usage and to do my job with direct formatting cleaning. It is necessary for translation. It will not introduce any content changes. So, please, wait for the fixed files a few days before you start with the CG 7.0 guide. Milos On 6/23/20 9:52 AM, Steve (GMail) wrote: Hi Gordon, Thanks again for your help with the 6.4 Calc Guide, it is much appreciated. I'm delighted to hear that you are interested in helping out with the 7.0 Calc Guide. If you visit the The Document Foundation’s wiki you will find that the planned software release date for LibreOffice 7.0.0 final is August 6th 2020. Have you downloaded a version of 7.0 to try out? If not it would be worth doing so, possibly as a parallel installation so that you don't need to delete your current vers
Re[2]: [libreoffice-documentation] Calc Guide 7.0
All, I have moved the 6.4 chapter ODT files that were originally published last week to a suitably (and obviously) named sub-folder of the Archive folder. I have also copied the "clean" versions of the files received from Milos into the Published folder. I will utilise these as the starting point for the 7.0 edits. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" Sent: 01/07/2020 18:02:09 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Thank you Steve! I did no know that there a such groups. I added bot. Milos On 7/1/20 2:35 PM, Steve (GMail) wrote: Hi Milos, I'm sorry but I still can't see the folder containing the updated files. For what it's worth, I am a member of the "odfauthors" and "users" groups in Nextcloud. With regards to the ODS spreadsheets used for generating Calc Guide figures, I definitely have some of them, and there will be others in NextCloud. Please give me a few days and I'll collect together as many of them as I can. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" Cc: "Gordon Bates" ; "Documentation Team" Sent: 01/07/2020 11:53:35 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi Steve, I forgot to share the folder with you, sorry. I've just shared it with the group tdf-members, and I hope the rights are inherited, please check. The original ODS files would be great. I ho[ped that you have them, if not I will ask in a new post. thanks Milos On 7/1/20 9:44 AM, Steve (GMail) wrote: Hi Milos, Many thanks for that work. Unfortunately I have logged into Nextcloud and couldn't find a subfolder called SK community within the Shared folder. So I can't see the updated files. When I can access the updated files, then I intend to use them as the basis for the 7.0 update. I also don't have a problem using them to replace the published 6.4 files. With regards to the screenshots, I assume that you would like the original ODS files that were used? If so, I'll investigate. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" ; "Gordon Bates" ; "Documentation Team" Sent: 01/07/2020 08:12:00 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi, the cleaned files are on Nextcloud in Shared/SK community/Cleaned/CG64.tgz https://nextcloud.documentfoundation.org/apps/files/?dir=/Shared/SK community/Cleaned I've changed a few direct formattings to styles and removed all direct formatting by my script. Then, I've compared the cleaned documents to the originals for any accidental changes (none found). It would be good if the published CG files were replaced by the cleaned ones and also if they were used as a start for CG70. In the text there are numerous screen shots which show content of example spreadsheets. It would help the translators if these were available, too. Would it be possible? cheers Milos On 6/26/20 9:37 AM, Steve (GMail) wrote: Hi Milos, That's great, I was intending to do the same but there's no point duplicating effort. Please advise when you are finished with the files. By the way, I am hoping that the re-introduction of the alphabetical index does not complicate translation. Please advise if this will cause any translation issues. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" ; "Gordon Bates" ; "Documentation Team" Sent: 26/06/2020 08:26:01 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi, now that CG64 is finished, I would like to check style usage and to do my job with direct formatting cleaning. It is necessary for translation. It will not introduce any content changes. So, please, wait for the fixed files a few days before you start with the CG 7.0 guide. Milos On 6/23/20 9:52 AM, Steve (GMail) wrote: Hi Gordon, Thanks again for your help with the 6.4 Calc Guide, it is much appreciated. I'm delighted to hear that you are interested in helping out with the 7.0 Calc Guide. If you visit the The Document Foundation’s wiki you will find that the planned software release date for LibreOffice 7.0.0 final is August 6th 2020. Have you downloaded a version of 7.0 to try out? If not it would be worth doing so, possibly as a parallel installation so that you don't need to delete your current version of 6.4 yet. I use the Separate Install GUI to achieve this - see https://wiki.documentfoundation.org/SI-GUI. The Calc section of the Release Notes at https://wiki.documentfoundation.org/ReleaseNotes/7.0 will give you an idea of what's changing at
Re[4]: [libreoffice-documentation] Calc Guide 7.0
Thanks, I now have access to the files. Regards, Steve -- Original Message -- From: "Pulkit Krishna" To: "Steve (GMail)" Sent: 01/07/2020 13:44:16 Subject: Re: Re[2]: [libreoffice-documentation] Calc Guide 7.0 Hello Steve, I can access the file shared by Milos. I have copied it to the Calc Guide Folder. I hope now you can access it. Pulkit Krishna On Wed, Jul 1, 2020 at 6:08 PM Steve (GMail) wrote: Hi Milos, I'm sorry but I still can't see the folder containing the updated files. For what it's worth, I am a member of the "odfauthors" and "users" groups in Nextcloud. With regards to the ODS spreadsheets used for generating Calc Guide figures, I definitely have some of them, and there will be others in NextCloud. Please give me a few days and I'll collect together as many of them as I can. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" Cc: "Gordon Bates" ; "Documentation Team" Sent: 01/07/2020 11:53:35 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 >Hi Steve, >I forgot to share the folder with you, sorry. I've just shared it with >the group tdf-members, and I hope the rights are inherited, please check. >The original ODS files would be great. I ho[ped that you have them, if >not I will ask in a new post. >thanks >Milos > >On 7/1/20 9:44 AM, Steve (GMail) wrote: >> Hi Milos, >> Many thanks for that work. >> Unfortunately I have logged into Nextcloud and couldn't find a >> subfolder called SK community within the Shared folder. So I can't see >> the updated files. >> When I can access the updated files, then I intend to use them as the >> basis for the 7.0 update. I also don't have a problem using them to >> replace the published 6.4 files. >> With regards to the screenshots, I assume that you would like the >> original ODS files that were used? If so, I'll investigate. >> Regards, >> Steve >> >> -- Original Message ------ >> From: "Milos Sramek" >> To: "Steve (GMail)" ; "Gordon Bates" >> ; "Documentation Team" >> >> Sent: 01/07/2020 08:12:00 >> Subject: Re: [libreoffice-documentation] Calc Guide 7.0 >> >>> Hi, >>> the cleaned files are on Nextcloud in Shared/SK >>> community/Cleaned/CG64.tgz >>>https://nextcloud.documentfoundation.org/apps/files/?dir=/Shared/SK >>> community/Cleaned >>> >>> I've changed a few direct formattings to styles and removed all direct >>> formatting by my script. Then, I've compared the cleaned documents to >>> the originals for any accidental changes (none found). >>> >>> It would be good if the published CG files were replaced by the cleaned >>> ones and also if they were used as a start for CG70. >>> >>> In the text there are numerous screen shots which show content of >>> example spreadsheets. It would help the translators if these were >>> available, too. Would it be possible? >>> >>> cheers >>> Milos >>> >>> On 6/26/20 9:37 AM, Steve (GMail) wrote: >>>> Hi Milos, >>>> >>>> That's great, I was intending to do the same but there's no point >>>> duplicating effort. Please advise when you are finished with the >>>> files. >>>> >>>> By the way, I am hoping that the re-introduction of the alphabetical >>>> index does not complicate translation. Please advise if this will >>>> cause any translation issues. >>>> >>>> Regards, >>>> >>>> Steve >>>> >>>> >>>> -- Original Message -- >>>> From: "Milos Sramek" >>>> To: "Steve (GMail)" ; "Gordon Bates" >>>> ; "Documentation Team" >>>> >>>> Sent: 26/06/2020 08:26:01 >>>> Subject: Re: [libreoffice-documentation] Calc Guide 7.0 >>>> >>>>> Hi, >>>>> now that CG64 is finished, I would like to check style usage and >>>>> to do >>>>> my job with direct formatting cleaning. It is necessary for >>>>> translation. >>>>> It will not introduce any content changes. >>>>> >>>>> So, please, wait for the fixed files a few days before you start with >>>>> the CG 7.0 guide. >>>>> >>>>> Milos >>>>>
Re[2]: [libreoffice-documentation] Calc Guide 7.0
Hi Milos, I'm sorry but I still can't see the folder containing the updated files. For what it's worth, I am a member of the "odfauthors" and "users" groups in Nextcloud. With regards to the ODS spreadsheets used for generating Calc Guide figures, I definitely have some of them, and there will be others in NextCloud. Please give me a few days and I'll collect together as many of them as I can. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" Cc: "Gordon Bates" ; "Documentation Team" Sent: 01/07/2020 11:53:35 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi Steve, I forgot to share the folder with you, sorry. I've just shared it with the group tdf-members, and I hope the rights are inherited, please check. The original ODS files would be great. I ho[ped that you have them, if not I will ask in a new post. thanks Milos On 7/1/20 9:44 AM, Steve (GMail) wrote: Hi Milos, Many thanks for that work. Unfortunately I have logged into Nextcloud and couldn't find a subfolder called SK community within the Shared folder. So I can't see the updated files. When I can access the updated files, then I intend to use them as the basis for the 7.0 update. I also don't have a problem using them to replace the published 6.4 files. With regards to the screenshots, I assume that you would like the original ODS files that were used? If so, I'll investigate. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" ; "Gordon Bates" ; "Documentation Team" Sent: 01/07/2020 08:12:00 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi, the cleaned files are on Nextcloud in Shared/SK community/Cleaned/CG64.tgz https://nextcloud.documentfoundation.org/apps/files/?dir=/Shared/SK community/Cleaned I've changed a few direct formattings to styles and removed all direct formatting by my script. Then, I've compared the cleaned documents to the originals for any accidental changes (none found). It would be good if the published CG files were replaced by the cleaned ones and also if they were used as a start for CG70. In the text there are numerous screen shots which show content of example spreadsheets. It would help the translators if these were available, too. Would it be possible? cheers Milos On 6/26/20 9:37 AM, Steve (GMail) wrote: Hi Milos, That's great, I was intending to do the same but there's no point duplicating effort. Please advise when you are finished with the files. By the way, I am hoping that the re-introduction of the alphabetical index does not complicate translation. Please advise if this will cause any translation issues. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" ; "Gordon Bates" ; "Documentation Team" Sent: 26/06/2020 08:26:01 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi, now that CG64 is finished, I would like to check style usage and to do my job with direct formatting cleaning. It is necessary for translation. It will not introduce any content changes. So, please, wait for the fixed files a few days before you start with the CG 7.0 guide. Milos On 6/23/20 9:52 AM, Steve (GMail) wrote: Hi Gordon, Thanks again for your help with the 6.4 Calc Guide, it is much appreciated. I'm delighted to hear that you are interested in helping out with the 7.0 Calc Guide. If you visit the The Document Foundation’s wiki you will find that the planned software release date for LibreOffice 7.0.0 final is August 6th 2020. Have you downloaded a version of 7.0 to try out? If not it would be worth doing so, possibly as a parallel installation so that you don't need to delete your current version of 6.4 yet. I use the Separate Install GUI to achieve this - see https://wiki.documentfoundation.org/SI-GUI. The Calc section of the Release Notes at https://wiki.documentfoundation.org/ReleaseNotes/7.0 will give you an idea of what's changing at 7.0. However that won't be the full story as not all software changes find their way into the release notes - we will only discover some changes by comparing the appearance and behaviour of the 6.4 and 7.0 Calc software. If you do experiment with the 7.0 version of Calc, please keep a note of any differences that you notice. When I've finished publishing the 6.4 document, we'll be able to move forward to the 7.0 update. Regards, Steve -- Milos Sramek, msrame...@gmail.com -- Milos Sramek, msrame...@gmail.com -- email & jabber: sramek.mi...@gmail.com -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/
Re: [libreoffice-documentation] Calc Guide 7.0
Hi, the cleaned files are on Nextcloud in Shared/SK community/Cleaned/CG64.tgz https://nextcloud.documentfoundation.org/apps/files/?dir=/Shared/SK community/Cleaned I've changed a few direct formattings to styles and removed all direct formatting by my script. Then, I've compared the cleaned documents to the originals for any accidental changes (none found). It would be good if the published CG files were replaced by the cleaned ones and also if they were used as a start for CG70. In the text there are numerous screen shots which show content of example spreadsheets. It would help the translators if these were available, too. Would it be possible? cheers Milos On 6/26/20 9:37 AM, Steve (GMail) wrote: > Hi Milos, > > That's great, I was intending to do the same but there's no point > duplicating effort. Please advise when you are finished with the files. > > By the way, I am hoping that the re-introduction of the alphabetical > index does not complicate translation. Please advise if this will > cause any translation issues. > > Regards, > > Steve > > > -- Original Message -- > From: "Milos Sramek" > To: "Steve (GMail)" ; "Gordon Bates" > ; "Documentation Team" > > Sent: 26/06/2020 08:26:01 > Subject: Re: [libreoffice-documentation] Calc Guide 7.0 > >> Hi, >> now that CG64 is finished, I would like to check style usage and to do >> my job with direct formatting cleaning. It is necessary for translation. >> It will not introduce any content changes. >> >> So, please, wait for the fixed files a few days before you start with >> the CG 7.0 guide. >> >> Milos >> >> On 6/23/20 9:52 AM, Steve (GMail) wrote: >>> Hi Gordon, >>> >>> Thanks again for your help with the 6.4 Calc Guide, it is much >>> appreciated. >>> >>> I'm delighted to hear that you are interested in helping out with the >>> 7.0 Calc Guide. If you visit the The Document Foundation’s wiki you >>> will find that the planned software release date for LibreOffice 7.0.0 >>> final is August 6th 2020. >>> >>> Have you downloaded a version of 7.0 to try out? If not it would be >>> worth doing so, possibly as a parallel installation so that you don't >>> need to delete your current version of 6.4 yet. I use the Separate >>> Install GUI to achieve this - see >>> https://wiki.documentfoundation.org/SI-GUI. >>> >>> The Calc section of the Release Notes at >>> https://wiki.documentfoundation.org/ReleaseNotes/7.0 will give you an >>> idea of what's changing at 7.0. However that won't be the full story >>> as not all software changes find their way into the release notes - we >>> will only discover some changes by comparing the appearance and >>> behaviour of the 6.4 and 7.0 Calc software. If you do experiment with >>> the 7.0 version of Calc, please keep a note of any differences that >>> you notice. >>> >>> When I've finished publishing the 6.4 document, we'll be able to move >>> forward to the 7.0 update. >>> >>> Regards, >>> >>> Steve >>> >>> >>> >> >> -- >> Milos Sramek, msrame...@gmail.com >> > > -- Milos Sramek, msrame...@gmail.com -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
Re[2]: [libreoffice-documentation] Calc Guide 7.0
Hi Milos, Many thanks for that work. Unfortunately I have logged into Nextcloud and couldn't find a subfolder called SK community within the Shared folder. So I can't see the updated files. When I can access the updated files, then I intend to use them as the basis for the 7.0 update. I also don't have a problem using them to replace the published 6.4 files. With regards to the screenshots, I assume that you would like the original ODS files that were used? If so, I'll investigate. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" ; "Gordon Bates" ; "Documentation Team" Sent: 01/07/2020 08:12:00 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi, the cleaned files are on Nextcloud in Shared/SK community/Cleaned/CG64.tgz https://nextcloud.documentfoundation.org/apps/files/?dir=/Shared/SK community/Cleaned I've changed a few direct formattings to styles and removed all direct formatting by my script. Then, I've compared the cleaned documents to the originals for any accidental changes (none found). It would be good if the published CG files were replaced by the cleaned ones and also if they were used as a start for CG70. In the text there are numerous screen shots which show content of example spreadsheets. It would help the translators if these were available, too. Would it be possible? cheers Milos On 6/26/20 9:37 AM, Steve (GMail) wrote: Hi Milos, That's great, I was intending to do the same but there's no point duplicating effort. Please advise when you are finished with the files. By the way, I am hoping that the re-introduction of the alphabetical index does not complicate translation. Please advise if this will cause any translation issues. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" ; "Gordon Bates" ; "Documentation Team" Sent: 26/06/2020 08:26:01 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi, now that CG64 is finished, I would like to check style usage and to do my job with direct formatting cleaning. It is necessary for translation. It will not introduce any content changes. So, please, wait for the fixed files a few days before you start with the CG 7.0 guide. Milos On 6/23/20 9:52 AM, Steve (GMail) wrote: Hi Gordon, Thanks again for your help with the 6.4 Calc Guide, it is much appreciated. I'm delighted to hear that you are interested in helping out with the 7.0 Calc Guide. If you visit the The Document Foundation’s wiki you will find that the planned software release date for LibreOffice 7.0.0 final is August 6th 2020. Have you downloaded a version of 7.0 to try out? If not it would be worth doing so, possibly as a parallel installation so that you don't need to delete your current version of 6.4 yet. I use the Separate Install GUI to achieve this - see https://wiki.documentfoundation.org/SI-GUI. The Calc section of the Release Notes at https://wiki.documentfoundation.org/ReleaseNotes/7.0 will give you an idea of what's changing at 7.0. However that won't be the full story as not all software changes find their way into the release notes - we will only discover some changes by comparing the appearance and behaviour of the 6.4 and 7.0 Calc software. If you do experiment with the 7.0 version of Calc, please keep a note of any differences that you notice. When I've finished publishing the 6.4 document, we'll be able to move forward to the 7.0 update. Regards, Steve -- Milos Sramek, msrame...@gmail.com -- Milos Sramek, msrame...@gmail.com -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
Re: [libreoffice-documentation] Calc Guide 7.0
Hi Milos Em 26/06/2020 05:40, Milos Sramek escreveu: > Hi Steve, > an index is not a problem, but the entries should be added in the right > way. > > LO "helps" in adding index entries - if the cursor is placed inside a > word or directly next to it, when adding an entry the field Item (the > second one from top) in the dialog is prefilled with that word. After > pressing OK the whole word is highligted (if field highlighting is on). > This is the wrong way, since in the ODF code the higlighted word is both > displayed and used as the index entry. If translated in a language which > uses inflection, this would add the inflected form to the index. > > The correct way is to add the index entry one word before or after. In > that case and entry is created which is independent from the displayed > text and can be translated. For example, if I would like to add the > word "search" in the sentence " enter the text that you want to search > for", I would add it before "to". The entry is then displayed only as a > gray rectangle without any text. Thanks for this tip. Actually if you place the cursor before "to", then "to" is brought to the index entry dialog, so you must change it manually to "search" before pressing OK. Olivier > > Cheers, > Milos > > On 6/26/20 9:37 AM, Steve (GMail) wrote: >> Hi Milos, >> >> That's great, I was intending to do the same but there's no point >> duplicating effort. Please advise when you are finished with the files. >> >> By the way, I am hoping that the re-introduction of the alphabetical >> index does not complicate translation. Please advise if this will >> cause any translation issues. >> >> Regards, >> >> Steve >> >> >> -- Original Message -- >> From: "Milos Sramek" >> To: "Steve (GMail)" ; "Gordon Bates" >> ; "Documentation Team" >> >> Sent: 26/06/2020 08:26:01 >> Subject: Re: [libreoffice-documentation] Calc Guide 7.0 >> >>> Hi, >>> now that CG64 is finished, I would like to check style usage and to do >>> my job with direct formatting cleaning. It is necessary for translation. >>> It will not introduce any content changes. >>> >>> So, please, wait for the fixed files a few days before you start with >>> the CG 7.0 guide. >>> >>> Milos >>> >>> On 6/23/20 9:52 AM, Steve (GMail) wrote: >>>> Hi Gordon, >>>> >>>> Thanks again for your help with the 6.4 Calc Guide, it is much >>>> appreciated. >>>> >>>> I'm delighted to hear that you are interested in helping out with the >>>> 7.0 Calc Guide. If you visit the The Document Foundation’s wiki you >>>> will find that the planned software release date for LibreOffice 7.0.0 >>>> final is August 6th 2020. >>>> >>>> Have you downloaded a version of 7.0 to try out? If not it would be >>>> worth doing so, possibly as a parallel installation so that you don't >>>> need to delete your current version of 6.4 yet. I use the Separate >>>> Install GUI to achieve this - see >>>> https://wiki.documentfoundation.org/SI-GUI. >>>> >>>> The Calc section of the Release Notes at >>>> https://wiki.documentfoundation.org/ReleaseNotes/7.0 will give you an >>>> idea of what's changing at 7.0. However that won't be the full story >>>> as not all software changes find their way into the release notes - we >>>> will only discover some changes by comparing the appearance and >>>> behaviour of the 6.4 and 7.0 Calc software. If you do experiment with >>>> the 7.0 version of Calc, please keep a note of any differences that >>>> you notice. >>>> >>>> When I've finished publishing the 6.4 document, we'll be able to move >>>> forward to the 7.0 update. >>>> >>>> Regards, >>>> >>>> Steve >>>> >>>> >>>> >>> >>> -- >>> Milos Sramek, msrame...@gmail.com >>> >> >> > -- Olivier Hallot LibreOffice Documentation Coordinator Comunidade LibreOffice Rio de Janeiro - Brasil - Local Time: UTC-03:00 http://tdf.io/joinus -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
Re: [libreoffice-documentation] Calc Guide 7.0
Hi Steve, an index is not a problem, but the entries should be added in the right way. LO "helps" in adding index entries - if the cursor is placed inside a word or directly next to it, when adding an entry the field Item (the second one from top) in the dialog is prefilled with that word. After pressing OK the whole word is highligted (if field highlighting is on). This is the wrong way, since in the ODF code the higlighted word is both displayed and used as the index entry. If translated in a language which uses inflection, this would add the inflected form to the index. The correct way is to add the index entry one word before or after. In that case and entry is created which is independent from the displayed text and can be translated. For example, if I would like to add the word "search" in the sentence " enter the text that you want to search for", I would add it before "to". The entry is then displayed only as a gray rectangle without any text. Cheers, Milos On 6/26/20 9:37 AM, Steve (GMail) wrote: > Hi Milos, > > That's great, I was intending to do the same but there's no point > duplicating effort. Please advise when you are finished with the files. > > By the way, I am hoping that the re-introduction of the alphabetical > index does not complicate translation. Please advise if this will > cause any translation issues. > > Regards, > > Steve > > > -- Original Message -- > From: "Milos Sramek" > To: "Steve (GMail)" ; "Gordon Bates" > ; "Documentation Team" > > Sent: 26/06/2020 08:26:01 > Subject: Re: [libreoffice-documentation] Calc Guide 7.0 > >> Hi, >> now that CG64 is finished, I would like to check style usage and to do >> my job with direct formatting cleaning. It is necessary for translation. >> It will not introduce any content changes. >> >> So, please, wait for the fixed files a few days before you start with >> the CG 7.0 guide. >> >> Milos >> >> On 6/23/20 9:52 AM, Steve (GMail) wrote: >>> Hi Gordon, >>> >>> Thanks again for your help with the 6.4 Calc Guide, it is much >>> appreciated. >>> >>> I'm delighted to hear that you are interested in helping out with the >>> 7.0 Calc Guide. If you visit the The Document Foundation’s wiki you >>> will find that the planned software release date for LibreOffice 7.0.0 >>> final is August 6th 2020. >>> >>> Have you downloaded a version of 7.0 to try out? If not it would be >>> worth doing so, possibly as a parallel installation so that you don't >>> need to delete your current version of 6.4 yet. I use the Separate >>> Install GUI to achieve this - see >>> https://wiki.documentfoundation.org/SI-GUI. >>> >>> The Calc section of the Release Notes at >>> https://wiki.documentfoundation.org/ReleaseNotes/7.0 will give you an >>> idea of what's changing at 7.0. However that won't be the full story >>> as not all software changes find their way into the release notes - we >>> will only discover some changes by comparing the appearance and >>> behaviour of the 6.4 and 7.0 Calc software. If you do experiment with >>> the 7.0 version of Calc, please keep a note of any differences that >>> you notice. >>> >>> When I've finished publishing the 6.4 document, we'll be able to move >>> forward to the 7.0 update. >>> >>> Regards, >>> >>> Steve >>> >>> >>> >> >> -- >> Milos Sramek, msrame...@gmail.com >> > > -- email & jabber: sramek.mi...@gmail.com -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
Re: [libreoffice-documentation] Calc Guide 7.0
Hi, now that CG64 is finished, I would like to check style usage and to do my job with direct formatting cleaning. It is necessary for translation. It will not introduce any content changes. So, please, wait for the fixed files a few days before you start with the CG 7.0 guide. Milos On 6/23/20 9:52 AM, Steve (GMail) wrote: > Hi Gordon, > > Thanks again for your help with the 6.4 Calc Guide, it is much > appreciated. > > I'm delighted to hear that you are interested in helping out with the > 7.0 Calc Guide. If you visit the The Document Foundation’s wiki you > will find that the planned software release date for LibreOffice 7.0.0 > final is August 6th 2020. > > Have you downloaded a version of 7.0 to try out? If not it would be > worth doing so, possibly as a parallel installation so that you don't > need to delete your current version of 6.4 yet. I use the Separate > Install GUI to achieve this - see > https://wiki.documentfoundation.org/SI-GUI. > > The Calc section of the Release Notes at > https://wiki.documentfoundation.org/ReleaseNotes/7.0 will give you an > idea of what's changing at 7.0. However that won't be the full story > as not all software changes find their way into the release notes - we > will only discover some changes by comparing the appearance and > behaviour of the 6.4 and 7.0 Calc software. If you do experiment with > the 7.0 version of Calc, please keep a note of any differences that > you notice. > > When I've finished publishing the 6.4 document, we'll be able to move > forward to the 7.0 update. > > Regards, > > Steve > > > -- Milos Sramek, msrame...@gmail.com -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
Re[2]: [libreoffice-documentation] Calc Guide 7.0
Hi Milos, That's great, I was intending to do the same but there's no point duplicating effort. Please advise when you are finished with the files. By the way, I am hoping that the re-introduction of the alphabetical index does not complicate translation. Please advise if this will cause any translation issues. Regards, Steve -- Original Message -- From: "Milos Sramek" To: "Steve (GMail)" ; "Gordon Bates" ; "Documentation Team" Sent: 26/06/2020 08:26:01 Subject: Re: [libreoffice-documentation] Calc Guide 7.0 Hi, now that CG64 is finished, I would like to check style usage and to do my job with direct formatting cleaning. It is necessary for translation. It will not introduce any content changes. So, please, wait for the fixed files a few days before you start with the CG 7.0 guide. Milos On 6/23/20 9:52 AM, Steve (GMail) wrote: Hi Gordon, Thanks again for your help with the 6.4 Calc Guide, it is much appreciated. I'm delighted to hear that you are interested in helping out with the 7.0 Calc Guide. If you visit the The Document Foundation’s wiki you will find that the planned software release date for LibreOffice 7.0.0 final is August 6th 2020. Have you downloaded a version of 7.0 to try out? If not it would be worth doing so, possibly as a parallel installation so that you don't need to delete your current version of 6.4 yet. I use the Separate Install GUI to achieve this - see https://wiki.documentfoundation.org/SI-GUI. The Calc section of the Release Notes at https://wiki.documentfoundation.org/ReleaseNotes/7.0 will give you an idea of what's changing at 7.0. However that won't be the full story as not all software changes find their way into the release notes - we will only discover some changes by comparing the appearance and behaviour of the 6.4 and 7.0 Calc software. If you do experiment with the 7.0 version of Calc, please keep a note of any differences that you notice. When I've finished publishing the 6.4 document, we'll be able to move forward to the 7.0 update. Regards, Steve -- Milos Sramek, msrame...@gmail.com -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy
[libreoffice-documentation] Calc Guide 7.0
Hi Gordon, Thanks again for your help with the 6.4 Calc Guide, it is much appreciated. I'm delighted to hear that you are interested in helping out with the 7.0 Calc Guide. If you visit the The Document Foundation’s wiki you will find that the planned software release date for LibreOffice 7.0.0 final is August 6th 2020. Have you downloaded a version of 7.0 to try out? If not it would be worth doing so, possibly as a parallel installation so that you don't need to delete your current version of 6.4 yet. I use the Separate Install GUI to achieve this - see https://wiki.documentfoundation.org/SI-GUI. The Calc section of the Release Notes at https://wiki.documentfoundation.org/ReleaseNotes/7.0 will give you an idea of what's changing at 7.0. However that won't be the full story as not all software changes find their way into the release notes - we will only discover some changes by comparing the appearance and behaviour of the 6.4 and 7.0 Calc software. If you do experiment with the 7.0 version of Calc, please keep a note of any differences that you notice. When I've finished publishing the 6.4 document, we'll be able to move forward to the 7.0 update. Regards, Steve -- To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette List archive: https://listarchives.libreoffice.org/global/documentation/ Privacy Policy: https://www.documentfoundation.org/privacy