Re: [Drakelist] DR-7 board re-install to TR-7
Ken - Good that it was the connector, and not the IC! 73, Garey - K4OAH Glen Allen, VA Drake 2-B, 4-B, C-Line& TR-4/C Service Supplement CDs K Allen wrote: Thanks to all who responded that the coax connection I asked about is a plug-in connection and not soldered. Anyway, after re-seating the pins under the board and the connectors on top of the board the digital display still did not work and I do not have any test equipment. The easiest thing to do was check all 5 of the top of the board connectors again and I found that P3 was apparently still not making good contact with the pins. DeoxIT was applied and the digital display suddenly re-appeared. Low tech miracle. Thanks again to all, Ken - N0VA ___ Drakelist mailing list Drakelist@zerobeat.net http://mailman.zerobeat.net/mailman/listinfo/drakelist
Re: [Drakelist] DR-7 board re-install to TR-7
Thanks to all who responded that the coax connection I asked about is a plug-in connection and not soldered. Anyway, after re-seating the pins under the board and the connectors on top of the board the digital display still did not work and I do not have any test equipment. The easiest thing to do was check all 5 of the top of the board connectors again and I found that P3 was apparently still not making good contact with the pins. DeoxIT was applied and the digital display suddenly re-appeared. Low tech miracle. Thanks again to all, Ken - N0VA ___ Drakelist mailing list Drakelist@zerobeat.net http://mailman.zerobeat.net/mailman/listinfo/drakelist
Re: [Drakelist] DR-7 board re-install to TR-7
It is not supposed to be soldered. You just plug it in. - Ki > Tried to post this yesterday but my attempt was bounced back as spam. Here's > my question: After the digital frequency went blank on my TR-7 I pulled the > DR-7 board and reseated all the connectors. The single coaxial cable that > has to pulled to remove the boardis the center conductor supposed to be > soldered in place on the small board it connects to? It did not feel > soldered in place when I removed it and the thin blue wire initially. > > And unfortunately, when I replaced everything the digital display did not > come back. > > Ken - N0VA *** ___ Drakelist mailing list Drakelist@zerobeat.net http://mailman.zerobeat.net/mailman/listinfo/drakelist
[Drakelist] DR-7 board re-install to TR-7
Tried to post this yesterday but my attempt was bounced back as spam. Here's my question: After the digital frequency went blank on my TR-7 I pulled the DR-7 board and reseated all the connectors. The single coaxial cable that has to pulled to remove the boardis the center conductor supposed to be soldered in place on the small board it connects to? It did not feel soldered in place when I removed it and the thin blue wire initially. And unfortunately, when I replaced everything the digital display did not come back. Ken - N0VA___ Drakelist mailing list Drakelist@zerobeat.net http://mailman.zerobeat.net/mailman/listinfo/drakelist