[Dx4win] Hawai'i
Hi Jim, You had it right the first er second time. The name of the State is Hawai'i. The name of the Big Island is Hawai'i. The name of the county is Hawai'i. These are locations in the United States and the language is English. Hawaii is commonly used but is not the correct name for any of the above. The state maps and signs are gradually being changed. I do not call this a part of the set of so called culturally sensitive issues. The use of the word Hawaii without the glottal stop is just a mistake that is slowly being corrected. It is too bad that some so called experts wish to continue with errors. This reminds me that when the US renamed a famous area to honor Jack Northrop the founder of the Northrop Aircraft Corporation and father of the flying wing aircraft design. They got it wrong and named it Northrup Field. And kept it wrong on the maps. Aloha, John KH7T
[Dx4win] Hawaii Per DXCC List Please
Jim, Please eliminate potential for confusion and follow the DXCC spelling. Hawaii should be Hawaii. Thanks, Tony N2SS
[Dx4win] MicroHam, SteppIR and DX4WIN
Yes, I have that setup in the shack. It is not stable in that the SteppIR box mis-reads the radio frequency once every few minutes and sends the antenna slewing. The typicall mis-read is in the 50 to 60 mHz range. While I have not proven to myself that the same misread does not occur with Writelog or DXBase 2006, but I have never observed it mis-reading with either of those programs. I am in the process of adding an audio alert to the slewing antenna to continue testing. This is mis-read does not seem like it should be software program related and will require additional testing to conclude one way or the other. 73s Ken N5TY - Original Message - From: Jim Reisert AD1C [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Sunday, August 06, 2006 23:41 Subject: [Dx4win] MicroHam, SteppIR and DX4WIN Does anyone have a similar configuration running but using DX4WIN instead of DXBase? In my case, the radio would be an Orion instead of the Yaesu. Thanks 73 - Jim AD1C To: [EMAIL PROTECTED] From: Joe Subich, W4TV [EMAIL PROTECTED] Date: Sun, 6 Aug 2006 09:00:45 -0400 Subject: RE: [microHAM] steppir wye cable Reply-To: [EMAIL PROTECTED] Page 20 of the BigIR manual shows the SteppIR RS-232 Y cable: www.steppir.com/pdf/biggir%20instruction%20manual%2024%20pages.pdf I would use that in the CAT line between the microKEYER and the FT-1000MP. The SteppIR connector labeled Computer will connect to the FT-1000MP, the SteppIR connector labeled Radio will connect to the DB9 from the microHAM cable. Under normal conditions the SteppIR controller will not track automatically when using DXBase logging software because DXBase does not continuously poll the radio. microKEYER's polling will enable tracking with DXBase and the SteppIR. 73, ... Joe Subich, W4TV microHAM America http://www.microHAM-USA.com http://groups.yahoo.com/group/microHAM [EMAIL PROTECTED] -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] various
Hello gang, I am working my way through a huge box of QSL cards, and I have two questions. * A KL7 station in 'Kenai Peninsula County', although this is not one of the 4 possbile counties according to DX4WIN. Does anyone know what county this represents? * Printing labels. I get a QSL from a station whom I QSO'ed two times, but the QSL is only for one of those two contacts. I confirm the QSL'ed contact and put both label fields to 'yes'. Then it prints two labels: one with the confirmed and another with the unconfirmed QSO. How do I get ALL contacts on ONE label regardless of confirmation status? TNX / 73 de Franki ON5ZO
[Dx4win] various
Hi Franki, I used to live there and operated as WL7M. That's considered South Central by DX4WIN. 73, Joe WD?M (ex-WL7M) At 12:08 PM 8/8/2006, Franki ON5ZO wrote: Hello gang, I am working my way through a huge box of QSL cards, and I have two questions. * A KL7 station in 'Kenai Peninsula County', although this is not one of the 4 possbile counties according to DX4WIN. Does anyone know what county this represents? * Printing labels. I get a QSL from a station whom I QSO'ed two times, but the QSL is only for one of those two contacts. I confirm the QSL'ed contact and put both label fields to 'yes'. Then it prints two labels: one with the confirmed and another with the unconfirmed QSO. How do I get ALL contacts on ONE label regardless of confirmation status? TNX / 73 de Franki ON5ZO From [EMAIL PROTECTED] Tue Aug 8 14:13:13 2006 From: [EMAIL PROTECTED] (Ken Kopp) Date: Tue Aug 8 14:26:49 2006 Subject: [Dx4win] Keni Penensula County Message-ID: [EMAIL PROTECTED] Does the QSL show a town? If so, I have a USPS directory that shows the county for ALL US towns. 73! Ken Kopp - K0PP [EMAIL PROTECTED] or [EMAIL PROTECTED]
[Dx4win] various
Franki The reason that you have the problem is that you are requesting 2 labels I suspect; one that says Tnx QSL, and the other that says PSE QSL !! I try to confirm all QSO's when people request extra QSO's with MD4K, of which I am the manager! If I receive a card (I am dealing with a buro drop of about 1000 now!); I confirm all QSO's be selecting yes; actually using the F2 key. This only prints to one label. 73 Dave -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Franki ON5ZO Sent: 08 August 2006 19:08 To: dx4win@mailman.qth.net Subject: [Dx4win] various Hello gang, I am working my way through a huge box of QSL cards, and I have two questions. * A KL7 station in 'Kenai Peninsula County', although this is not one of the 4 possbile counties according to DX4WIN. Does anyone know what county this represents? * Printing labels. I get a QSL from a station whom I QSO'ed two times, but the QSL is only for one of those two contacts. I confirm the QSL'ed contact and put both label fields to 'yes'. Then it prints two labels: one with the confirmed and another with the unconfirmed QSO. How do I get ALL contacts on ONE label regardless of confirmation status? TNX / 73 de Franki ON5ZO ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] various
The reason that you have the problem is that you are requesting 2 labels I suspect; one that says Tnx QSL, and the other that says PSE QSL !! Errr, not that I know. At least I didn't set it up like that. How can I check that? If I receive a card (I am dealing with a buro drop of about 1000 now!); I confirm all QSO's be selecting yes; actually using the F2 key. This only prints to one label. I have F2 set to 'mark QSO as confirmed and set print flag to Y' - so I set the print flag manually for other QSOs that are unconfirmed. Confirmed QSOs are printed on a label, unconfirmed printed on another label. - Franki
[Dx4win] Alaskan Judicial Districts
See: http://www.qsl.net/kl7j/county.htm 73, Roger -- Remember the USS Liberty (AGTR-5) http://ussliberty.org/ From [EMAIL PROTECTED] Wed Aug 9 16:00:02 2006 From: [EMAIL PROTECTED] (Dave Sharred) Date: Wed Aug 9 16:13:48 2006 Subject: [Dx4win] Alaskan Judicial Districts In-Reply-To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Hey Roger Many thanks , that looks to have wrapped it up well I'll dig out my KL7 QSL's now; and finally see what I have ... 73 Dave -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Roger D Johnson Sent: 09 August 2006 01:51 To: Dx4win@Mailman.Qth.Net Subject: [Dx4win] Alaskan Judicial Districts See: http://www.qsl.net/kl7j/county.htm 73, Roger -- Remember the USS Liberty (AGTR-5) http://ussliberty.org/ ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
