[Dx4win] F3 and Update QSO button
When a bring up a contact, either old or new, in the QSO window and hit F3 to open the Callsign /Mgr lookup window, DX4WIN goes to my CD callsign database and put the information in the lookup window fine. Somehow I expected the Update QSO button in the lookup window to copy the address, etc., information into the Notes for this Call field in the QSO window. This action doesn't occur. Is it supposed to? What does the Update button actually update? tnx es 73 - John, W4AU __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 7.06 won't set split on K3
This might might get it going for you. Download and install DX4WIN 7.07. Use the Elecraft K3 X4 rig file that downloads with version 7.07. If you are using LP_Bridge, I have found that something gets out of whack with it at times. When LP_Bridge gets off track, modes on VFO B and split can be wrong after double clicking a DX spot. Restarting LP_Bridge seems to correct the problem. I hope this helps. 73, Bob - N9SF At 08:27 AM 2/3/2009, Robert Naumann wrote: I looked through the archives, and I did not see a response to Steve's question below. I am seeing exact same behavior on my K3 now too. Using 7.07.02. With split being turned off for no reason, it makes one a lid very quickly in a split pileup situation. Is there a resolution to this? 73, Bob W5OV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of inventor_sixty_one Sent: Monday, December 08, 2008 9:59 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] 7.06 won't set split on K3 I wonder what I am doing wrong ... in either the manual 'set frequency' tool, or by selecting a DX spot that is set for split VFO mode, the 'split' indicator on the K3 is activated ... but does not stay in that mode. It just 'clicks' to split mode for a moment and then reverts to VFO A mode. manually going into split mode on the radio works fine. I have tried this at both 4800 and 38400 bps speeds, to see if that made any difference. None. Ideas? Steve KZ1X/4 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 7.06 won't set split on K3
I looked through the archives, and I did not see a response to Steve's question below. I am seeing exact same behavior on my K3 now too. Using 7.07.02. With split being turned off for no reason, it makes one a lid very quickly in a split pileup situation. Is there a resolution to this? 73, Bob W5OV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of inventor_sixty_one Sent: Monday, December 08, 2008 9:59 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] 7.06 won't set split on K3 I wonder what I am doing wrong ... in either the manual 'set frequency' tool, or by selecting a DX spot that is set for split VFO mode, the 'split' indicator on the K3 is activated ... but does not stay in that mode. It just 'clicks' to split mode for a moment and then reverts to VFO A mode. manually going into split mode on the radio works fine. I have tried this at both 4800 and 38400 bps speeds, to see if that made any difference. None. Ideas? Steve KZ1X/4 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 7.06 won't set split on K3
Thanks Bob. I was not using LP Bridge at the time, but I will keep this in mind when I do. I suspect that using the K3 X4 rig definition may resolve it. I saw that, but I did not know what its purpose was so I did not try it. 73, Bob W5OV This might might get it going for you. Download and install DX4WIN 7.07. Use the Elecraft K3 X4 rig file that downloads with version 7.07. If you are using LP_Bridge, I have found that something gets out of whack with it at times. When LP_Bridge gets off track, modes on VFO B and split can be wrong after double clicking a DX spot. Restarting LP_Bridge seems to correct the problem. I hope this helps. 73, Bob - N9SF At 08:27 AM 2/3/2009, Robert Naumann wrote: I looked through the archives, and I did not see a response to Steve's question below. I am seeing exact same behavior on my K3 now too. Using 7.07.02. With split being turned off for no reason, it makes one a lid very quickly in a split pileup situation. Is there a resolution to this? 73, Bob W5OV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of inventor_sixty_one Sent: Monday, December 08, 2008 9:59 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] 7.06 won't set split on K3 I wonder what I am doing wrong ... in either the manual 'set frequency' tool, or by selecting a DX spot that is set for split VFO mode, the 'split' indicator on the K3 is activated ... but does not stay in that mode. It just 'clicks' to split mode for a moment and then reverts to VFO A mode. manually going into split mode on the radio works fine. I have tried this at both 4800 and 38400 bps speeds, to see if that made any difference. None. Ideas? Steve KZ1X/4 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] F3 and Update QSO button
Hi Larry - Thanks for the tip and information, but I must have an option somewhere not set or something. For example, when I type your call into the callsign field and then hit F3, all of your info is shown in the lookup window, but absolutely nothing in the QSO window gets populated when I hit the update button Still trying to figure out what's going on. tnx es 73 - John, W4AU At 08:09 AM 2/3/2009, Larry Gauthier \(K8UT\) wrote: John, Which fields get updated depends on what information is available in the lookup window and what fields are already filled in the QSO window. For example - using your callsign: Pressing Update QSO populates the state, county, grid, and name fields. If any of those fields are already populated, they are not overwritten. -larry K8UT - Original Message - From: John Unger w...@verizon.net To: Dx4win@mailman.qth.net Sent: Tuesday, February 03, 2009 07:48 Subject: [Dx4win] F3 and Update QSO button When a bring up a contact, either old or new, in the QSO window and hit F3 to open the Callsign /Mgr lookup window, DX4WIN goes to my CD callsign database and put the information in the lookup window fine. Somehow I expected the Update QSO button in the lookup window to copy the address, etc., information into the Notes for this Call field in the QSO window. This action doesn't occur. Is it supposed to? What does the Update button actually update? tnx es 73 - John, W4AU __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database: 270.10.17/1931 - Release Date: 2/2/2009 7:21 PM __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 7.06 won't set split on K3
I just tried it with my K3 and all is working fine..guess I should have asked what the difference between the K3 and the K3 X4 settings were. 73's, Bill, AA7X -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of w...@w5ov.com Sent: Tuesday, February 03, 2009 12:07 PM To: Bob Thompson - N9SF Cc: Larry Phipps; Robert Naumann; dx4win@mailman.qth.net Subject: Re: [Dx4win] 7.06 won't set split on K3 Thanks Bob. I was not using LP Bridge at the time, but I will keep this in mind when I do. I suspect that using the K3 X4 rig definition may resolve it. I saw that, but I did not know what its purpose was so I did not try it. 73, Bob W5OV This might might get it going for you. Download and install DX4WIN 7.07. Use the Elecraft K3 X4 rig file that downloads with version 7.07. If you are using LP_Bridge, I have found that something gets out of whack with it at times. When LP_Bridge gets off track, modes on VFO B and split can be wrong after double clicking a DX spot. Restarting LP_Bridge seems to correct the problem. I hope this helps. 73, Bob - N9SF At 08:27 AM 2/3/2009, Robert Naumann wrote: I looked through the archives, and I did not see a response to Steve's question below. I am seeing exact same behavior on my K3 now too. Using 7.07.02. With split being turned off for no reason, it makes one a lid very quickly in a split pileup situation. Is there a resolution to this? 73, Bob W5OV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of inventor_sixty_one Sent: Monday, December 08, 2008 9:59 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] 7.06 won't set split on K3 I wonder what I am doing wrong ... in either the manual 'set frequency' tool, or by selecting a DX spot that is set for split VFO mode, the 'split' indicator on the K3 is activated ... but does not stay in that mode. It just 'clicks' to split mode for a moment and then reverts to VFO A mode. manually going into split mode on the radio works fine. I have tried this at both 4800 and 38400 bps speeds, to see if that made any difference. None. Ideas? Steve KZ1X/4 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] RTTY Spots
No, there is no way. Based on your settings for CW frequency cutoff under File Preferences QSO, any spot that does not include the text RTTY in its comment field will be set as either CW or phone. -larry K8UT - Original Message - From: Harry Williams To: dx4win Sent: Monday, February 02, 2009 16:09 Subject: [Dx4win] RTTY Spots I am trying out RTTY so I have configured Dx4win to interface to MMTTY and it all seems to work well with one small but annoying exception. It appears that Dx4win relies on the remarks column in cluster spots to signal RTTY and if there it sets the mode to RTTY and passes it on to the rig. If it is not there the correct mode does not appear to be set. Is there any way to force the mode to RTTY and have Dx4win just ignore the remarks in the spot? Thanks, Harry W0LS -- __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html__ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 7.06 won't set split on K3
It works perfectly for me now as I have just QSYed to 14094 for FW5RE and my K3 is set to split mode and VFO B is on the correct split frequency. I am also running LP Bridge now too, and everything is working perfectly. 73, Bob W5OV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Bill Eisinger Sent: Tuesday, February 03, 2009 5:45 PM To: w...@w5ov.com; 'Bob Thompson - N9SF' Cc: 'Larry Phipps'; dx4win@mailman.qth.net Subject: Re: [Dx4win] 7.06 won't set split on K3 I just tried it with my K3 and all is working fine..guess I should have asked what the difference between the K3 and the K3 X4 settings were. 73's, Bill, AA7X -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of w...@w5ov.com Sent: Tuesday, February 03, 2009 12:07 PM To: Bob Thompson - N9SF Cc: Larry Phipps; Robert Naumann; dx4win@mailman.qth.net Subject: Re: [Dx4win] 7.06 won't set split on K3 Thanks Bob. I was not using LP Bridge at the time, but I will keep this in mind when I do. I suspect that using the K3 X4 rig definition may resolve it. I saw that, but I did not know what its purpose was so I did not try it. 73, Bob W5OV This might might get it going for you. Download and install DX4WIN 7.07. Use the Elecraft K3 X4 rig file that downloads with version 7.07. If you are using LP_Bridge, I have found that something gets out of whack with it at times. When LP_Bridge gets off track, modes on VFO B and split can be wrong after double clicking a DX spot. Restarting LP_Bridge seems to correct the problem. I hope this helps. 73, Bob - N9SF At 08:27 AM 2/3/2009, Robert Naumann wrote: I looked through the archives, and I did not see a response to Steve's question below. I am seeing exact same behavior on my K3 now too. Using 7.07.02. With split being turned off for no reason, it makes one a lid very quickly in a split pileup situation. Is there a resolution to this? 73, Bob W5OV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of inventor_sixty_one Sent: Monday, December 08, 2008 9:59 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] 7.06 won't set split on K3 I wonder what I am doing wrong ... in either the manual 'set frequency' tool, or by selecting a DX spot that is set for split VFO mode, the 'split' indicator on the K3 is activated ... but does not stay in that mode. It just 'clicks' to split mode for a moment and then reverts to VFO A mode. manually going into split mode on the radio works fine. I have tried this at both 4800 and 38400 bps speeds, to see if that made any difference. None. Ideas? Steve KZ1X/4 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
