[Dx4win] CW keying issue v8.03
I have the same problem here. I am using v8.03, Windows XP, SP3 , USB interface RigExpert Tiny, virtuale: COM1 - CAT; COM2, PTT delay 0, DTR = CW keying, RTS = PTT. When I start a CW keyboard message the FT1000MP locks on key down. Changes and values DTR and RTS do not give positive result. Ver 8.02 with the specified adjustments - CW works perfectly (CW device type DX4WIN - not WinKey) 73 de Alex, RA1QX __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] CW Keying Issue w/8.03
OS:XP Brand of Desktop =Dell B110 Real serial on boardTo be sure check in control panel|system|device manager if the comport is installed ok normally it should be Yes it is and it works with V7.05/7.04 9600 = Baud 8 bits None=parity 1 stopbit None=flow control DX4WIN SETUP COMPORT = COM1 (on board)DELAY = 1 CW = DTR PTT = RTS CW keying via com port 1 works with ver V7.05/7.04, not with V8.03 with same everything.Cw just hangs and I have to select NO com port to turn it off with V8.03Now, I have tried the LPT Port and I like to run 2 radio's and key via the keyboard. V8.03 keys radio #1 CW Good but on radio #2 it just sends ditdah ditdah ditdahditdah ditdah no matter what I send via the keyboard. Also the LPT driver seems to slow the computer downI have tried it on 2 computers (p4's 2.5g w/2g Ram )and I had to uninstall the driver to speed up my computers. Is anyone else having keying issues with XPI have setup and run LPT port with V7.04 in the past with 2 radio's and had no porblem with my SO2R box. I don't know what is going on with V8.03??I have spent 2 days trying to find a solution. Like I stated before I can run the older versions with no trouble.Other programs WL/N1MM work fine so I have to say at this point it's DX4WIN V 8.03.Any help is appreciated,HNY Wayne N2WK __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] CW keying issue?
>Hello >I have also the same problem : locks on key down (cw via virtual serial >ports) >Equipement here : >Windows XP SP3 >micro keyer II >Icom 7700 >All work on 8.02 but not on 8.03 >The solution for me, is use now winkey via micro keyer II and all work ! >Best 73 >HNY >Yann F5NBU >www.f5nbu.org Hello Same problem here Key down all the time until com port is deselected in 8.03 preferences Works no problem on 8.02 Windows XP SP3 Com port 3 DTR on PCI Vscom dual port board FT2000 Solution is use other software at the moment, which I don't want to do. Thanks Andrew GM0UDL __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] CW keying issue
Kostas I am using Windows 7 and always log on as an administrator. Right clicking the DX4WIN logo and clicking run as administrator makes no difference as far as I can see. I still cannot get the CW keying to work with DX4WIN. 73 Ian, G3RVM > -Original Message- > From: dx4win-boun...@mailman.qth.net > [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Kostas Stamatis > Sent: 05 January 2010 12:57 > To: REFLECTOR dx4win > Subject: Re: [Dx4win] CW keying issue > > Maybe someone with the problem can try this to tell me if it > works (it worked in one of my friends). > Do a right click on dx4win icon and in properties choose to > run it always as administrator (if you have 7 or vista). > I wonder if XP users with the problem have administrator rights? > Just an idea. > 73 Kostas sv1dpi > > - Original Message - > From: "ON4AOI" > To: > Sent: Monday, January 04, 2010 6:02 PM > Subject: [Dx4win] CW keying issue > > > > HNY All, > > Like I asked before I like the following info > >>From those that have the keying problem > > > > Example > > OS: VISTA HOME > > Brand of LAPTOP = HP DV9700 > > Real Serial on MB = NO > > Real serial via add on board = NO > > USB to serial = YES brand GEMBIRD > > To be sure check in control panel|system|devicemanager > > if the comport is installed ok > > normally it should be > > 9600 = Baud > > 8 bits > > None=parity > > 1 stopbit > > None=flow control > > > > DX4WIN SETUP > > COMPORT = COM1 (my case) > > DELAY = 1 > > CW = DTR > > PTT = RTS (can be set to none if using vox or full break in) > > > > Guy ON4AOI > > > > > > > > > > > > __ > > Dx4win mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Dx4win@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] CW keying issue
Maybe someone with the problem can try this to tell me if it works (it worked in one of my friends). Do a right click on dx4win icon and in properties choose to run it always as administrator (if you have 7 or vista). I wonder if XP users with the problem have administrator rights? Just an idea. 73 Kostas sv1dpi - Original Message - From: "ON4AOI" To: Sent: Monday, January 04, 2010 6:02 PM Subject: [Dx4win] CW keying issue > HNY All, > Like I asked before I like the following info >>From those that have the keying problem > > Example > OS: VISTA HOME > Brand of LAPTOP = HP DV9700 > Real Serial on MB = NO > Real serial via add on board = NO > USB to serial = YES brand GEMBIRD > To be sure check in control panel|system|devicemanager > if the comport is installed ok > normally it should be > 9600 = Baud > 8 bits > None=parity > 1 stopbit > None=flow control > > DX4WIN SETUP > COMPORT = COM1 (my case) > DELAY = 1 > CW = DTR > PTT = RTS (can be set to none if using vox or full break in) > > Guy ON4AOI > > > > > > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] CW keying issue
HNY All, Like I asked before I like the following info >From those that have the keying problem Example OS: VISTA HOME Brand of LAPTOP = HP DV9700 Real Serial on MB = NO Real serial via add on board = NO USB to serial = YES brand GEMBIRD To be sure check in control panel|system|devicemanager if the comport is installed ok normally it should be 9600 = Baud 8 bits None=parity 1 stopbit None=flow control DX4WIN SETUP COMPORT = COM1 (my case) DELAY = 1 CW = DTR PTT = RTS (can be set to none if using vox or full break in) Guy ON4AOI __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] CW keying issue?
Mel, I did a ton of testing off-list with Guy, Paul, and Jim and reported pretty much all of the info that you've mentioned, as well as doing low-level traces showing the actual calls to the OS to manipulate the status of the control lines.. As Guy said, the tough part is that neither Guy nor Paul can reproduce the issue which makes it difficult to troubleshoot. I don't want to flood the list with reports, but I do agree that it would make sense for folks who are having the issue to report in so that maybe some kind of pattern can be found. On 1/4/2010 6:58 AM, Mel wrote: > Perhaps all having this issue could report EXACT details about OS > hardware and drivers being used as well as version numbers if possible. > Even information about the MB and BIOS might help find a common thread. > It's one of those times where pedantic detail is called for. I have > tried it on 2 computers with 2 OS's without issue. I have others if I > knew what we are looking for. > > BTW, just for general interest, this is why most commercial enterprises > try to standardize their computer assets as much as possible. Tracking > down hardware dependent issues can be time consuming! > > ON4AOI wrote: > >> Hi Ian, >> The discussion did not end behind screen but the biggest problem >> Is that we (Paul and myself) can not duplicate the problem. >> Paul has tested on W7 and couldn´t reproduce the problem, CW and PTT are >> working ok >> I have tested with real comports, microKEYERII with virtual ports and also >> USB to serial(brand is Gembird) >> on the following systems. >> Vista home laptop (no real serials) with USB to Serial with FT920 >> (cat+cw+ptt) all ok >> Vista Ultimate Quad PC (6 real serials, 3LPT ports, 10 virtual serial >> ports(MKII) and 2 USB to Serial >> Tested all possibilities out one by one and all is acting OK >> EEEPC1000H XPHOME SP3 (no real serials) with USB to Serial to FT920 >> (cat+cw+ptt) all ok >> Also tested with 10 virtual serial ports(MKII) to IC7800 and all is working >> OK. >> >> So I hope you understand that this is hard to find out what is going wrong >> since Paul didn´t change anything to this part of the software, he only >> added a protection >> when the comport is not there or changed when the program is running to a >> port that does not exist >> >> GUY ON4AOI >> >> >> >>> -----Oorspronkelijk bericht- >>> Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- >>> boun...@mailman.qth.net] Namens Ian Trusson >>> Verzonden: maandag 4 januari 2010 3:17 >>> Aan: dx4win@mailman.qth.net >>> Onderwerp: [Dx4win] CW keying issue? >>> >>> I have been following the "CW Keying Issue" thread in the archive, but >>> the >>> thread seemed to come to an end on 28 Dec 2009 without a resolution. >>> >>> I have the same problem here. I am using v8.03, Windows 7, USB to >>> serial >>> converter, COM1, PTT delay 1, DTR = CW keying, RTS = PTT. When I start >>> a CW >>> keyboard message the FT1000MP locks on key down. >>> >>> Is there any more info on this problem? >>> >>> 73, Ian G3RVM >>> >>> __ >>> Dx4win mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/dx4win >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Dx4win@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> >> __ >> Dx4win mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Dx4win@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- David, K2DBK http://k2dbk.blogspot.com http://k2dbk.com __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] CW keying issue?
Hello I have also the same problem : locks on key down (cw via virtual serial ports) Equipement here : Windows XP SP3 micro keyer II Icom 7700 All work on 8.02 but not on 8.03 The solution for me, is use now winkey via micro keyer II and all work ! Best 73 HNY Yann F5NBU www.f5nbu.org -Message d'origine- De : dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] De la part de ON4AOI Envoyé : lundi 4 janvier 2010 08:50 À : 'Ian Trusson' Cc : dx4win@mailman.qth.net Objet : Re: [Dx4win] CW keying issue? Hi Ian, The discussion did not end behind screen but the biggest problem Is that we (Paul and myself) can not duplicate the problem. Paul has tested on W7 and couldn´t reproduce the problem, CW and PTT are working ok I have tested with real comports, microKEYERII with virtual ports and also USB to serial(brand is Gembird) on the following systems. Vista home laptop (no real serials) with USB to Serial with FT920 (cat+cw+ptt) all ok Vista Ultimate Quad PC (6 real serials, 3LPT ports, 10 virtual serial ports(MKII) and 2 USB to Serial Tested all possibilities out one by one and all is acting OK EEEPC1000H XPHOME SP3 (no real serials) with USB to Serial to FT920 (cat+cw+ptt) all ok Also tested with 10 virtual serial ports(MKII) to IC7800 and all is working OK. So I hope you understand that this is hard to find out what is going wrong since Paul didn´t change anything to this part of the software, he only added a protection when the comport is not there or changed when the program is running to a port that does not exist GUY ON4AOI > -Oorspronkelijk bericht- > Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- > boun...@mailman.qth.net] Namens Ian Trusson > Verzonden: maandag 4 januari 2010 3:17 > Aan: dx4win@mailman.qth.net > Onderwerp: [Dx4win] CW keying issue? > > I have been following the "CW Keying Issue" thread in the archive, but > the > thread seemed to come to an end on 28 Dec 2009 without a resolution. > > I have the same problem here. I am using v8.03, Windows 7, USB to > serial > converter, COM1, PTT delay 1, DTR = CW keying, RTS = PTT. When I start > a CW > keyboard message the FT1000MP locks on key down. > > Is there any more info on this problem? > > 73, Ian G3RVM > > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] CW keying issue?
Perhaps all having this issue could report EXACT details about OS hardware and drivers being used as well as version numbers if possible. Even information about the MB and BIOS might help find a common thread. It's one of those times where pedantic detail is called for. I have tried it on 2 computers with 2 OS's without issue. I have others if I knew what we are looking for. BTW, just for general interest, this is why most commercial enterprises try to standardize their computer assets as much as possible. Tracking down hardware dependent issues can be time consuming! ON4AOI wrote: > Hi Ian, > The discussion did not end behind screen but the biggest problem > Is that we (Paul and myself) can not duplicate the problem. > Paul has tested on W7 and couldn´t reproduce the problem, CW and PTT are > working ok > I have tested with real comports, microKEYERII with virtual ports and also > USB to serial(brand is Gembird) > on the following systems. > Vista home laptop (no real serials) with USB to Serial with FT920 > (cat+cw+ptt) all ok > Vista Ultimate Quad PC (6 real serials, 3LPT ports, 10 virtual serial > ports(MKII) and 2 USB to Serial > Tested all possibilities out one by one and all is acting OK > EEEPC1000H XPHOME SP3 (no real serials) with USB to Serial to FT920 > (cat+cw+ptt) all ok > Also tested with 10 virtual serial ports(MKII) to IC7800 and all is working > OK. > > So I hope you understand that this is hard to find out what is going wrong > since Paul didn´t change anything to this part of the software, he only > added a protection > when the comport is not there or changed when the program is running to a > port that does not exist > > GUY ON4AOI > > >> -Oorspronkelijk bericht- >> Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- >> boun...@mailman.qth.net] Namens Ian Trusson >> Verzonden: maandag 4 januari 2010 3:17 >> Aan: dx4win@mailman.qth.net >> Onderwerp: [Dx4win] CW keying issue? >> >> I have been following the "CW Keying Issue" thread in the archive, but >> the >> thread seemed to come to an end on 28 Dec 2009 without a resolution. >> >> I have the same problem here. I am using v8.03, Windows 7, USB to >> serial >> converter, COM1, PTT delay 1, DTR = CW keying, RTS = PTT. When I start >> a CW >> keyboard message the FT1000MP locks on key down. >> >> Is there any more info on this problem? >> >> 73, Ian G3RVM >> >> __ >> Dx4win mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Dx4win@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] CW keying issue?
Hi Ian, The discussion did not end behind screen but the biggest problem Is that we (Paul and myself) can not duplicate the problem. Paul has tested on W7 and couldn´t reproduce the problem, CW and PTT are working ok I have tested with real comports, microKEYERII with virtual ports and also USB to serial(brand is Gembird) on the following systems. Vista home laptop (no real serials) with USB to Serial with FT920 (cat+cw+ptt) all ok Vista Ultimate Quad PC (6 real serials, 3LPT ports, 10 virtual serial ports(MKII) and 2 USB to Serial Tested all possibilities out one by one and all is acting OK EEEPC1000H XPHOME SP3 (no real serials) with USB to Serial to FT920 (cat+cw+ptt) all ok Also tested with 10 virtual serial ports(MKII) to IC7800 and all is working OK. So I hope you understand that this is hard to find out what is going wrong since Paul didn´t change anything to this part of the software, he only added a protection when the comport is not there or changed when the program is running to a port that does not exist GUY ON4AOI > -Oorspronkelijk bericht- > Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- > boun...@mailman.qth.net] Namens Ian Trusson > Verzonden: maandag 4 januari 2010 3:17 > Aan: dx4win@mailman.qth.net > Onderwerp: [Dx4win] CW keying issue? > > I have been following the "CW Keying Issue" thread in the archive, but > the > thread seemed to come to an end on 28 Dec 2009 without a resolution. > > I have the same problem here. I am using v8.03, Windows 7, USB to > serial > converter, COM1, PTT delay 1, DTR = CW keying, RTS = PTT. When I start > a CW > keyboard message the FT1000MP locks on key down. > > Is there any more info on this problem? > > 73, Ian G3RVM > > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] CW keying issue?
I have been following the "CW Keying Issue" thread in the archive, but the thread seemed to come to an end on 28 Dec 2009 without a resolution. I have the same problem here. I am using v8.03, Windows 7, USB to serial converter, COM1, PTT delay 1, DTR = CW keying, RTS = PTT. When I start a CW keyboard message the FT1000MP locks on key down. Is there any more info on this problem? 73, Ian G3RVM __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] CW keying issue? Anyone?
Just as a follow-up, I switched the keying from COM3, which is on an added-on card to COM1, which is the serial port located on the motherboard (on the off chance there was something odd about the serial port drivers) and unfortunately it made no difference. On 12/28/2009 4:04 PM, David, K2DBK wrote: > So has anyone else got any thoughts about the issue with CW keying > locking up in version 8.03? As I posted to this list, I've tried > literally every combination of using CW Keying& PTT on both DTR and RTS > with no luck. I've tried a completely clean install on the same computer > with the same issue. (Specifically, sending any CW results is the rig > going into xmit and staying there, until I either exit D4W or go into CW > setup and select then de-select Tune). The only test that I haven't done > yet will be to move to a different COM port. (The problem is that if > that works, I need to reconfigure all the other software that I use.) > > This works perfectly using version 8.02 (and prior) using the exact same > hardware configuration. I've verified the the keying setup continues to > work with programs that it worked with before I went to 8.03, and even > added a couple of new programs recently just as a test which all work > fine. (DTR on COM3 to be used for CW keying. I normally don't use PTT at > all since I run QSK, but it doesn't seem to matter whether I have PTT > configured or not.) > > I'm temporarily using CWType (a 3rd party program) to send CW from the > keyboard, but I'd really like to have the functionality back. I know > that I'm not the only one complaining, and I do know this can be a busy > time of the year to get around to things, so I am just trying to remind > the folks out there that I'd really like to get this working again. I am > more than happy to try test/debugging builds, whatever it takes. (And > I'm trying to get my fist so that this would be a lot less of an issue, > but it's just slow going folks!) > > Thanks. > -- 73, David, K2DBK http://k2dbk.blogspot.com http://k2dbk.com twitter: @k2dbk __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] CW keying issue? Anyone?
So has anyone else got any thoughts about the issue with CW keying locking up in version 8.03? As I posted to this list, I've tried literally every combination of using CW Keying & PTT on both DTR and RTS with no luck. I've tried a completely clean install on the same computer with the same issue. (Specifically, sending any CW results is the rig going into xmit and staying there, until I either exit D4W or go into CW setup and select then de-select Tune). The only test that I haven't done yet will be to move to a different COM port. (The problem is that if that works, I need to reconfigure all the other software that I use.) This works perfectly using version 8.02 (and prior) using the exact same hardware configuration. I've verified the the keying setup continues to work with programs that it worked with before I went to 8.03, and even added a couple of new programs recently just as a test which all work fine. (DTR on COM3 to be used for CW keying. I normally don't use PTT at all since I run QSK, but it doesn't seem to matter whether I have PTT configured or not.) I'm temporarily using CWType (a 3rd party program) to send CW from the keyboard, but I'd really like to have the functionality back. I know that I'm not the only one complaining, and I do know this can be a busy time of the year to get around to things, so I am just trying to remind the folks out there that I'd really like to get this working again. I am more than happy to try test/debugging builds, whatever it takes. (And I'm trying to get my fist so that this would be a lot less of an issue, but it's just slow going folks!) Thanks. -- David, K2DBK http://k2dbk.blogspot.com http://k2dbk.com __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
