Re: [Dx4win] KENWOOD TS570S
there is a yahoogroup for microham products micro...@yahoogroups.com Joe W4TV who is the USA microham is very helpful. Try li...@microham-usa.com They know better their products 73 Kostas SV1DPI - Original Message - From: "Andy P Hewitt" To: Sent: Monday, June 27, 2011 1:25 PM Subject: [Dx4win] KENWOOD TS570S > Hi, > > Can anyone on the reflector please help? > > > > I have two Kenwood rigs a TS950SDX and a TS570S (primarily used on 6m). > The > TS950SDX will connect and stay connected to most logging programs (DX4Win, > Wintest, MixW, SD etc) via a Microham usb adaptor. However despite my best > endeavours The TS570S won't stay connected to DX4Win. It will to the other > programs. I always thought that all Kenwood radios used the same settings > as > does the K3 but that it obviously not the case. I have been trying with > the > TS570 settings since I upgraded to ver.8 and I have just updated DX4Win to > ver. 8.05 and I have tried the TS480 settings. In the past I have tried > all > the different rig settings in FILE/PREFERENCES/RADIO always with the same > result. The rig will connect and both leds on the MicroHam DB9-K usb > interface flash showing that it is talking to the PC. But after a few > minutes the program indicates that it has lost communication with the rig > and everything freezes for a couple of minutes. > > > > This is quite frustrating especially now when I am chasing the new PJs on > 6m. > > > > 73 and many thanks > > Andy G3SVD > > > > > > > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] KENWOOD TS570S
I am not familiar with Microham. Different brands of USB adaptors will give different results. FWIW, I have a Belkin model that has worked in all applications. A search of the archives might turn up something, I seem to recall this issue having been around before. GL de W1EL Eric Lowell Eastern Maine Electronics Inc. 48 Loon Road Wesley ME 04686 serv...@satnetmaine.com www.satnetmaine.com From: Andy P Hewitt To: dx4win@mailman.qth.net Sent: Mon, June 27, 2011 6:25:26 AM Subject: [Dx4win] KENWOOD TS570S Hi, Can anyone on the reflector please help? I have two Kenwood rigs a TS950SDX and a TS570S (primarily used on 6m). The TS950SDX will connect and stay connected to most logging programs (DX4Win, Wintest, MixW, SD etc) via a Microham usb adaptor. However despite my best endeavours The TS570S won't stay connected to DX4Win. It will to the other programs. I always thought that all Kenwood radios used the same settings as does the K3 but that it obviously not the case. I have been trying with the TS570 settings since I upgraded to ver.8 and I have just updated DX4Win to ver. 8.05 and I have tried the TS480 settings. In the past I have tried all the different rig settings in FILE/PREFERENCES/RADIO always with the same result. The rig will connect and both leds on the MicroHam DB9-K usb interface flash showing that it is talking to the PC. But after a few minutes the program indicates that it has lost communication with the rig and everything freezes for a couple of minutes. This is quite frustrating especially now when I am chasing the new PJs on 6m. 73 and many thanks Andy G3SVD __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] KENWOOD TS570S
Eric, Thank you for the reply. However - I forgot the reason why I am using a MicroHam usb interface - my PC does not have a serial port connector only USB! I have been struggling with this problem for a long time. It connects and then drops out after some short time. The drop out time is anything between 10 seconds and ten minutes or maybe more. Thanks anyway. 73 Andy G3SVD _ From: Eric Lowell [mailto:eric.low...@yahoo.com] Sent: 27 June 2011 14:09 To: Andy P Hewitt Subject: Re: [Dx4win] KENWOOD TS570S Suspect the USB adaptor. I ran a TS570 with 6m for several years with a serial cable. Eric Lowell Eastern Maine Electronics Inc. 48 Loon Road Wesley ME 04686 serv...@satnetmaine.com www.satnetmaine.com _ From: Andy P Hewitt To: dx4win@mailman.qth.net Sent: Mon, June 27, 2011 6:25:26 AM Subject: [Dx4win] KENWOOD TS570S Hi, Can anyone on the reflector please help? I have two Kenwood rigs a TS950SDX and a TS570S (primarily used on 6m). The TS950SDX will connect and stay connected to most logging programs (DX4Win, Wintest, MixW, SD etc) via a Microham usb adaptor. However despite my best endeavours The TS570S won't stay connected to DX4Win. It will to the other programs. I always thought that all Kenwood radios used the same settings as does the K3 but that it obviously not the case. I have been trying with the TS570 settings since I upgraded to ver.8 and I have just updated DX4Win to ver. 8.05 and I have tried the TS480 settings. In the past I have tried all the different rig settings in FILE/PREFERENCES/RADIO always with the same result. The rig will connect and both leds on the MicroHam DB9-K usb interface flash showing that it is talking to the PC. But after a few minutes the program indicates that it has lost communication with the rig and everything freezes for a couple of minutes. This is quite frustrating especially now when I am chasing the new PJs on 6m. 73 and many thanks Andy G3SVD __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] KENWOOD TS570S
Hi, Can anyone on the reflector please help? I have two Kenwood rigs a TS950SDX and a TS570S (primarily used on 6m). The TS950SDX will connect and stay connected to most logging programs (DX4Win, Wintest, MixW, SD etc) via a Microham usb adaptor. However despite my best endeavours The TS570S won't stay connected to DX4Win. It will to the other programs. I always thought that all Kenwood radios used the same settings as does the K3 but that it obviously not the case. I have been trying with the TS570 settings since I upgraded to ver.8 and I have just updated DX4Win to ver. 8.05 and I have tried the TS480 settings. In the past I have tried all the different rig settings in FILE/PREFERENCES/RADIO always with the same result. The rig will connect and both leds on the MicroHam DB9-K usb interface flash showing that it is talking to the PC. But after a few minutes the program indicates that it has lost communication with the rig and everything freezes for a couple of minutes. This is quite frustrating especially now when I am chasing the new PJs on 6m. 73 and many thanks Andy G3SVD __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX4WIN - Kenwood TS570S Parameters (Repost)
Romas, I thank you for your advice but it does not work for me. For some reason adding IF; causes DX4Win to delete the selection of the TS950 from the Radio1. Radio2 (the TS570S) remains the same and loses communication with the radio after a few seconds, just as it did before. 73 Andy G3SVD -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Romualdas Ulevicius Sent: 13 February 2011 15:13 To: Dx4win@Mailman. Qth. Net Subject: Re: [Dx4win] DX4WIN - Kenwood TS570S Parameters (Repost) I have solved such problem in my DX4WIN ver.4.07 in this way: File - Databases - Radios - Kenwood 570 - Menu Values: insert in Command preamble box "IF;" , without quotation marks and save changes. "IF" is a Kenwood command "Reads status of the transceiver" 73 Romas LY3CY --- On Sun, 2/13/11, Andy P Hewitt wrote: > From: Andy P Hewitt > Subject: Re: [Dx4win] DX4WIN - Kenwood TS570S Parameters (Repost) > To: "'Bill Turner'" , "Dx4win@Mailman. Qth. Net" > Date: Sunday, February 13, 2011, 2:09 PM > Bill, > I also have a TS570S (bought in the US) and get the same > results, more or > less. In my case the radio control drops out after a > variable time delay, > which can be anything from 10 seconds or so to a couple of > hours. I get the > same messages as you. I am also using DX4Win 8.04 but the > same problem has > always existed with various earlier iterations of the > program. I have had > the rig for about ten years and have always used DX4W. I > also have a > TS950SDX which works FB, and when I have raised this > questions previously I > have been advised that if the prog works with one it should > work with the > other. > > > My PC is a Dell Dimension E520 desk top, running Windows XP > Home SP3, my > settings in Preferences are the same as yours, except that > I am using 4800 > baud. I have tried various speeds with any effect. I am > using a MicroHam > DB9K CAT interface with the PC. After trying to resolve > this problem without > success I decided to just live with it. I have found that > switching the 570S > off and back on again reconnects the CAT. > > If you get any replies that provide a solution I would be > very pleased to > know. > 73 > Andy > G3SVD > > > -Original Message- > From: dx4win-boun...@mailman.qth.net > [mailto:dx4win-boun...@mailman.qth.net] > On Behalf Of Bill Turner > Sent: 12 February 2011 15:57 > To: dx4win@mailman.qth.net > Subject: [Dx4win] DX4WIN - Kenwood TS570S Parameters > (Repost) > > I've been working on computer control for the TS-570S and > have it going for > N1MM, FLDigi, and HRD but I'm missing something for > DX4WIN. > > The CTRL indication appears on the Kenwood front panel > screen for 10 > seconds, > then disappears and I get an error message: > Radio timed out > Radio interface has been disabled > > Here is the setup: > DX4WIN 8.04 > User Level set to advanced > > Compaq Presario 1500 laptop > Using a Radio Shack Gigaware Serial to USB converter > assigned to COM10 > Windows XP, SP3 > Transceiver: Kenwood TS-570S > > Preferences: > Radio: > Kenwood 570S > Address 00 Default checked > Baud Rate 9600 Default checked > RTS checked > Kenwood without S meter (However, 570 does have an S meter > ) > COM port 10 > Poll rate (ms) 500 (5000 does not work either) > Max Tries 6 > Transverter offset 0 > Bands None > > Kenwood Transceiver Menu: > 32 Off > 33 2 > 34 6 > 35 96-1 > 36 on > 37 on > > If someone is running a similar combination, could you > compare your settings > and > see what I've missed? > Thanks, > > Bill, W4WNT > > > > > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX4WIN - Kenwood TS570S Parameters (Repost)
I have solved such problem in my DX4WIN ver.4.07 in this way: File - Databases - Radios - Kenwood 570 - Menu Values: insert in Command preamble box "IF;" , without quotation marks and save changes. "IF" is a Kenwood command "Reads status of the transceiver" 73 Romas LY3CY --- On Sun, 2/13/11, Andy P Hewitt wrote: > From: Andy P Hewitt > Subject: Re: [Dx4win] DX4WIN - Kenwood TS570S Parameters (Repost) > To: "'Bill Turner'" , "Dx4win@Mailman. Qth. Net" > > Date: Sunday, February 13, 2011, 2:09 PM > Bill, > I also have a TS570S (bought in the US) and get the same > results, more or > less. In my case the radio control drops out after a > variable time delay, > which can be anything from 10 seconds or so to a couple of > hours. I get the > same messages as you. I am also using DX4Win 8.04 but the > same problem has > always existed with various earlier iterations of the > program. I have had > the rig for about ten years and have always used DX4W. I > also have a > TS950SDX which works FB, and when I have raised this > questions previously I > have been advised that if the prog works with one it should > work with the > other. > > > My PC is a Dell Dimension E520 desk top, running Windows XP > Home SP3, my > settings in Preferences are the same as yours, except that > I am using 4800 > baud. I have tried various speeds with any effect. I am > using a MicroHam > DB9K CAT interface with the PC. After trying to resolve > this problem without > success I decided to just live with it. I have found that > switching the 570S > off and back on again reconnects the CAT. > > If you get any replies that provide a solution I would be > very pleased to > know. > 73 > Andy > G3SVD > > > -Original Message----- > From: dx4win-boun...@mailman.qth.net > [mailto:dx4win-boun...@mailman.qth.net] > On Behalf Of Bill Turner > Sent: 12 February 2011 15:57 > To: dx4win@mailman.qth.net > Subject: [Dx4win] DX4WIN - Kenwood TS570S Parameters > (Repost) > > I've been working on computer control for the TS-570S and > have it going for > N1MM, FLDigi, and HRD but I'm missing something for > DX4WIN. > > The CTRL indication appears on the Kenwood front panel > screen for 10 > seconds, > then disappears and I get an error message: > Radio timed out > Radio interface has been disabled > > Here is the setup: > DX4WIN 8.04 > User Level set to advanced > > Compaq Presario 1500 laptop > Using a Radio Shack Gigaware Serial to USB converter > assigned to COM10 > Windows XP, SP3 > Transceiver: Kenwood TS-570S > > Preferences: > Radio: > Kenwood 570S > Address 00 Default checked > Baud Rate 9600 Default checked > RTS checked > Kenwood without S meter (However, 570 does have an S meter > ) > COM port 10 > Poll rate (ms) 500 (5000 does not work either) > Max Tries 6 > Transverter offset 0 > Bands None > > Kenwood Transceiver Menu: > 32 Off > 33 2 > 34 6 > 35 96-1 > 36 on > 37 on > > If someone is running a similar combination, could you > compare your settings > and > see what I've missed? > Thanks, > > Bill, W4WNT > > > > > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX4WIN - Kenwood TS570S Parameters (Repost)
Bill, I also have a TS570S (bought in the US) and get the same results, more or less. In my case the radio control drops out after a variable time delay, which can be anything from 10 seconds or so to a couple of hours. I get the same messages as you. I am also using DX4Win 8.04 but the same problem has always existed with various earlier iterations of the program. I have had the rig for about ten years and have always used DX4W. I also have a TS950SDX which works FB, and when I have raised this questions previously I have been advised that if the prog works with one it should work with the other. My PC is a Dell Dimension E520 desk top, running Windows XP Home SP3, my settings in Preferences are the same as yours, except that I am using 4800 baud. I have tried various speeds with any effect. I am using a MicroHam DB9K CAT interface with the PC. After trying to resolve this problem without success I decided to just live with it. I have found that switching the 570S off and back on again reconnects the CAT. If you get any replies that provide a solution I would be very pleased to know. 73 Andy G3SVD -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Bill Turner Sent: 12 February 2011 15:57 To: dx4win@mailman.qth.net Subject: [Dx4win] DX4WIN - Kenwood TS570S Parameters (Repost) I've been working on computer control for the TS-570S and have it going for N1MM, FLDigi, and HRD but I'm missing something for DX4WIN. The CTRL indication appears on the Kenwood front panel screen for 10 seconds, then disappears and I get an error message: Radio timed out Radio interface has been disabled Here is the setup: DX4WIN 8.04 User Level set to advanced Compaq Presario 1500 laptop Using a Radio Shack Gigaware Serial to USB converter assigned to COM10 Windows XP, SP3 Transceiver: Kenwood TS-570S Preferences: Radio: Kenwood 570S Address 00 Default checked Baud Rate 9600 Default checked RTS checked Kenwood without S meter (However, 570 does have an S meter ) COM port 10 Poll rate (ms) 500 (5000 does not work either) Max Tries 6 Transverter offset 0 Bands None Kenwood Transceiver Menu: 32 Off 33 2 34 6 35 96-1 36 on 37 on If someone is running a similar combination, could you compare your settings and see what I've missed? Thanks, Bill, W4WNT __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DX4WIN - Kenwood TS570S Parameters (Repost)
I've been working on computer control for the TS-570S and have it going for N1MM, FLDigi, and HRD but I'm missing something for DX4WIN. The CTRL indication appears on the Kenwood front panel screen for 10 seconds, then disappears and I get an error message: Radio timed out Radio interface has been disabled Here is the setup: DX4WIN 8.04 User Level set to advanced Compaq Presario 1500 laptop Using a Radio Shack Gigaware Serial to USB converter assigned to COM10 Windows XP, SP3 Transceiver: Kenwood TS-570S Preferences: Radio: Kenwood 570S Address 00 Default checked Baud Rate 9600 Default checked RTS checked Kenwood without S meter (However, 570 does have an S meter ) COM port 10 Poll rate (ms) 500 (5000 does not work either) Max Tries 6 Transverter offset 0 Bands None Kenwood Transceiver Menu: 32 Off 33 2 34 6 35 96-1 36 on 37 on If someone is running a similar combination, could you compare your settings and see what I've missed? Thanks, Bill, W4WNT __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html