[Elecraft] Elecraft CW Net Report
Good Evening, Neither band was very strong but both had QSB. Low noise and weak signals did not work well. However, I gathered a few QNI and found next week will have a wedding and family visits. So next Sunday's turnout will be affected :) That's OK there are more weeks in the year. I did not hear any lightning. The sun almost came out, there are patches of blue sky all around. Ash from the volcano on Kamchatka is sweeping south through Washington. That should cause a redder sunset when the sun drops below the cloud layer. On 14050.5 kHz at 2200z: W0CZ - Ken - ND NO8V - John - MI K0DTJ - Brian - CA K6XK - Roy - IA K4JPN - Steve - GA On 7047.5 kHz at z: WM5F - Dwight - ID K6PJV - Dale - CA K0DTJ - Brian - CA Until next week 73, Kevin. KD5ONS - while( godot ) { abide(); } __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S Line in not working.
Jim, If you have been using SSB for FT8 what are you using for a sound card? I don't think you can use the internal sound card for data modes when in SSB. Mark, WB9CIF -Original Message- From: Jim Cary Sent: Monday, April 17, 2023 00:07 To: Mark Musick Cc: Dave New, N8SBE ; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3S Line in not working. Dave, I have been using my K3S in USB mode for FT8 for many years and never had a problem. JIM > On Apr 16, 2023, at 4:23 PM, Mark Musick wrote: > > Jim and Dave, > My K3S when in DATA mode, the MIC+LIN says "not APPL". > Jim you must not be in DATA mode. You have to be in DATA mode to use the > internal sound card for FT8. > I got my K4D a year ago so it has been a while since I worried about such > things. > > 73, > Mark, WB9CIF > > -Original Message- > From: elecraft-boun...@mailman.qth.net > On Behalf Of Dave New, N8SBE > Sent: Sunday, April 16, 2023 20:12 > To: Jim Cary > Cc: elecraft@mailman.qth.net > Subject: Re: [Elecraft] K3S Line in not working. > > Jim, > > I have MIC+LIN set to off, I think so that the K3s doesn't pick up room noise > when using data modes. > Also, the mic level control on the front panel affects the line in level when > you are in data a mode. In other modes, it is a mic level, instead. > > Hope that helps, > -- Dave, N8SBE > > On 2023-04-16 14:33, Jim Cary wrote: >> I Just received my K3S back from being serviced, but it doesn't >> appear that the Line In is functioning. >> >> On FT8 I have the MIC+LIN set to ON, and MIC SEL to FPL.BIAS - same >> settings as I have been using on my back-up K3. I am using the same >> cabling between PC and both rigs, so there is no issue with any of >> them. >> >> I've checked and double checked the Menu and Config settings between >> the two radios and they are identical. >> >> Anyone have any idea of what I might be missing before I contact >> Elecraft? >> >> Jim >> W2SM >> >> >> __ >> Elecraft mailing list >> Home: >> http://mailma/ >> n.qth.net%2Fmailman%2Flistinfo%2Felecraft=05%7C01%7C%7C4965f26dd >> f >> ab4797d1f308db3eb70e3f%7C84df9e7fe9f640afb435%7C1%7C0%7C6 >> 3 >> 8172728156299308%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoi >> V >> 2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=i2xj2fkNJ >> f >> HY98oqWyw%2FDVunljyV4kLFCm%2FI7kMSKj0%3D=0 >> Help: >> http://mailma/ >> n.qth.net%2Fmmfaq.htm=05%7C01%7C%7C4965f26ddfab4797d1f308db3eb70 >> e >> 3f%7C84df9e7fe9f640afb435%7C1%7C0%7C638172728156299308%7C >> U >> nknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1h >> a >> WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=eS53FUoeiLqq%2BjXAh%2FADtXsq% >> 2 >> F3%2FNsVDvZ0WQQwkDh1U%3D=0 >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: >> http://www.q/ >> s%2F=05%7C01%7C%7C26d37862cf5c470129c808db3ed7b9bd%7C84df9e7fe9f >> 640afb435%7C1%7C0%7C638172868468311138%7CUnknown%7CTWFpbG >> Zsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0 >> %3D%7C3000%7C%7C%7C=cWsgvg%2BUiWitkbpvmnysH80PSQZt9faHhSBpZjuzn >> xs%3D=0 >> l.net%2F=05%7C01%7C%7C4965f26ddfab4797d1f308db3eb70e3f%7C84df9e7 >> f >> e9f640afb435%7C1%7C0%7C638172728156299308%7CUnknown%7CTWF >> p >> bGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6M >> n >> 0%3D%7C3000%7C%7C%7C=X7TYOlbgi1%2Bbe2X5EVkS8axQdHdjsVW5lm3DC8YL >> g >> Eo%3D=0 Please help support this email list: >> http://www.q/ >> s%2F=05%7C01%7C%7C26d37862cf5c470129c808db3ed7b9bd%7C84df9e7fe9f >> 640afb435%7C1%7C0%7C638172868468311138%7CUnknown%7CTWFpbG >> Zsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0 >> %3D%7C3000%7C%7C%7C=cWsgvg%2BUiWitkbpvmnysH80PSQZt9faHhSBpZjuzn >> xs%3D=0 >> l.net%2Fdonate.html=05%7C01%7C%7C4965f26ddfab4797d1f308db3eb70e3 >> f >> %7C84df9e7fe9f640afb435%7C1%7C0%7C638172728156299308%7CUn >> k >> nown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haW >> w >> iLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=iJDjOGgXPvlTDjq33VAzwJVqcm2p5Nb >> % >> 2BVrJ8RHEjTu4%3D=0 >> Message delivered to n8...@densbe.com > __ > Elecraft mailing list > Home: > http://mailma/ > n.qth.net%2Fmailman%2Flistinfo%2Felecraft=05%7C01%7C%7C26d37862cf > 5c470129c808db3ed7b9bd%7C84df9e7fe9f640afb435%7C1%7C0%7C63 > 8172868468311138%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV > 2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=Tbk6gmhYxj > wafRy1yGgo1k85qRY0%2FccaWk%2BcxSnDdd0%3D=0 > Help: > http://mailma/ > n.qth.net%2Fmmfaq.htm=05%7C01%7C%7C26d37862cf5c470129c808db3ed7b9 > bd%7C84df9e7fe9f640afb435%7C1%7C0%7C638172868468311138%7CU > nknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha > WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=RpHflzNXIOPuz9xLLLvMAcbfjjRDBy > ivA%2FnzMcryOiI%3D=0 > Post: mailto:Elecraft@mailman.qth.net > > This list
Re: [Elecraft] K3S Line in not working.
Jim, Not a good idea, because any TX EQ, Compression, etc. will effect your FT8 transmit audio. Using DATA A will shut off all that automatically for audio data modes, making your signal much cleaner. 73, -- Dave, N8SBE On 2023-04-16 20:07, Jim Cary wrote: Dave, I have been using my K3S in USB mode for FT8 for many years and never had a problem. JIM On Apr 16, 2023, at 4:23 PM, Mark Musick wrote: Jim and Dave, My K3S when in DATA mode, the MIC+LIN says "not APPL". Jim you must not be in DATA mode. You have to be in DATA mode to use the internal sound card for FT8. I got my K4D a year ago so it has been a while since I worried about such things. 73, Mark, WB9CIF -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Dave New, N8SBE Sent: Sunday, April 16, 2023 20:12 To: Jim Cary Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3S Line in not working. Jim, I have MIC+LIN set to off, I think so that the K3s doesn't pick up room noise when using data modes. Also, the mic level control on the front panel affects the line in level when you are in data a mode. In other modes, it is a mic level, instead. Hope that helps, -- Dave, N8SBE On 2023-04-16 14:33, Jim Cary wrote: I Just received my K3S back from being serviced, but it doesn't appear that the Line In is functioning. On FT8 I have the MIC+LIN set to ON, and MIC SEL to FPL.BIAS - same settings as I have been using on my back-up K3. I am using the same cabling between PC and both rigs, so there is no issue with any of them. I've checked and double checked the Menu and Config settings between the two radios and they are identical. Anyone have any idea of what I might be missing before I contact Elecraft? Jim W2SM __ Elecraft mailing list Home: http://mailma/ n.qth.net%2Fmailman%2Flistinfo%2Felecraft=05%7C01%7C%7C4965f26ddf ab4797d1f308db3eb70e3f%7C84df9e7fe9f640afb435%7C1%7C0%7C63 8172728156299308%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV 2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=i2xj2fkNJf HY98oqWyw%2FDVunljyV4kLFCm%2FI7kMSKj0%3D=0 Help: http://mailma/ n.qth.net%2Fmmfaq.htm=05%7C01%7C%7C4965f26ddfab4797d1f308db3eb70e 3f%7C84df9e7fe9f640afb435%7C1%7C0%7C638172728156299308%7CU nknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=eS53FUoeiLqq%2BjXAh%2FADtXsq%2 F3%2FNsVDvZ0WQQwkDh1U%3D=0 Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qs/ l.net%2F=05%7C01%7C%7C4965f26ddfab4797d1f308db3eb70e3f%7C84df9e7f e9f640afb435%7C1%7C0%7C638172728156299308%7CUnknown%7CTWFp bGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn 0%3D%7C3000%7C%7C%7C=X7TYOlbgi1%2Bbe2X5EVkS8axQdHdjsVW5lm3DC8YLg Eo%3D=0 Please help support this email list: http://www.qs/ l.net%2Fdonate.html=05%7C01%7C%7C4965f26ddfab4797d1f308db3eb70e3f %7C84df9e7fe9f640afb435%7C1%7C0%7C638172728156299308%7CUnk nown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWw iLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=iJDjOGgXPvlTDjq33VAzwJVqcm2p5Nb% 2BVrJ8RHEjTu4%3D=0 Message delivered to n8...@densbe.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net/ Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmus...@outlook.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft 80M SSB Net Report
3784 kHz 9PM ET Sunday (0100Z Monday). Thanks to the following check ins (w) and relays (rel): Call State Radio/Amp Name 1 NA4C TNK4Vollie (w) 2 WM6P GAK4D/KPA1500 Steve (w),(rel) 3 KG9NGWIKX2/KXPA100 Sam (w) 4 KE3KQPAK4D Ben (w) 5 K2VJKNYK4D Vern (w) 6 WW4JFTNK3s/KPA500John (w) 7 WY3T FLK3s/KPA500Tim (w) 8 N8SBEMIK3s/KPA500Dave (w),(op) Thanks to the relay, Steve WM6P. At least the horrible lightning QRN of the previous evening during the Michigan QSO Party had subsided for this station, but Florida in particular was getting hit hard with lightning this evening. This will continue to be the pattern for the summer for 80M, I'm afraid. Some area of the country will likely be buried under static, so hopefully we can soldier on. Hope to see you next week! 73, -- Dave, N8SBE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S Line in not working.
Dave, I have been using my K3S in USB mode for FT8 for many years and never had a problem. JIM > On Apr 16, 2023, at 4:23 PM, Mark Musick wrote: > > Jim and Dave, > My K3S when in DATA mode, the MIC+LIN says "not APPL". > Jim you must not be in DATA mode. You have to be in DATA mode to use the > internal sound card for FT8. > I got my K4D a year ago so it has been a while since I worried about such > things. > > 73, > Mark, WB9CIF > > -Original Message- > From: elecraft-boun...@mailman.qth.net On > Behalf Of Dave New, N8SBE > Sent: Sunday, April 16, 2023 20:12 > To: Jim Cary > Cc: elecraft@mailman.qth.net > Subject: Re: [Elecraft] K3S Line in not working. > > Jim, > > I have MIC+LIN set to off, I think so that the K3s doesn't pick up room noise > when using data modes. > Also, the mic level control on the front panel affects the line in level when > you are in data a mode. In other modes, it is a mic level, instead. > > Hope that helps, > -- Dave, N8SBE > > On 2023-04-16 14:33, Jim Cary wrote: >> I Just received my K3S back from being serviced, but it doesn't appear >> that the Line In is functioning. >> >> On FT8 I have the MIC+LIN set to ON, and MIC SEL to FPL.BIAS - same >> settings as I have been using on my back-up K3. I am using the same >> cabling between PC and both rigs, so there is no issue with any of >> them. >> >> I've checked and double checked the Menu and Config settings between >> the two radios and they are identical. >> >> Anyone have any idea of what I might be missing before I contact >> Elecraft? >> >> Jim >> W2SM >> >> >> __ >> Elecraft mailing list >> Home: >> http://mailma/ >> n.qth.net%2Fmailman%2Flistinfo%2Felecraft=05%7C01%7C%7C4965f26ddf >> ab4797d1f308db3eb70e3f%7C84df9e7fe9f640afb435%7C1%7C0%7C63 >> 8172728156299308%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV >> 2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=i2xj2fkNJf >> HY98oqWyw%2FDVunljyV4kLFCm%2FI7kMSKj0%3D=0 >> Help: >> http://mailma/ >> n.qth.net%2Fmmfaq.htm=05%7C01%7C%7C4965f26ddfab4797d1f308db3eb70e >> 3f%7C84df9e7fe9f640afb435%7C1%7C0%7C638172728156299308%7CU >> nknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha >> WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=eS53FUoeiLqq%2BjXAh%2FADtXsq%2 >> F3%2FNsVDvZ0WQQwkDh1U%3D=0 >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: >> http://www.qs/ >> l.net%2F=05%7C01%7C%7C4965f26ddfab4797d1f308db3eb70e3f%7C84df9e7f >> e9f640afb435%7C1%7C0%7C638172728156299308%7CUnknown%7CTWFp >> bGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn >> 0%3D%7C3000%7C%7C%7C=X7TYOlbgi1%2Bbe2X5EVkS8axQdHdjsVW5lm3DC8YLg >> Eo%3D=0 Please help support this email list: >> http://www.qs/ >> l.net%2Fdonate.html=05%7C01%7C%7C4965f26ddfab4797d1f308db3eb70e3f >> %7C84df9e7fe9f640afb435%7C1%7C0%7C638172728156299308%7CUnk >> nown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWw >> iLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=iJDjOGgXPvlTDjq33VAzwJVqcm2p5Nb% >> 2BVrJ8RHEjTu4%3D=0 >> Message delivered to n8...@densbe.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net/ > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to markmus...@outlook.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S Line in not working.
A potential explanation: the LINE IN level may have defaulted to zero. The LINE IN level is adjusted using the MIC gain control, but only when MIC SEL is set to LINE. So, you need to set MIC SEL to LINE (which turns MIC+LIN off), adjust the MIC gain control to give the desired non-zero LINE IN level reading, then if you really want to use MIC+LIN on, set MIC SEL back to your chosen mic setting and set MIC+LIN to ON. For FT8, it would make more sense to set MIC+LIN to OFF and MIC SEL to LINE. The MIC SEL and MIC+LIN settings are remembered separately in SSB and DATA modes, so by using DATA A mode for FT8 you can avoid the need to change settings back and forth as you change operating modes. 73, Rich VE3KI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] No FT mode.
Should be Microham Input MicroHAM CODEC and output Headset earphone Microham CODEC on WSJT settings for audio. Rick NJ5W On Sun, Apr 16, 2023 at 6:00 PM Lou Mecseri wrote: > I have an 100% updated K3. > > Suddenly I lost capability to transmit FT8 mode. > > CW and SSB works OK, I do not know about RTTY. > > My K3 is connected to a MicroHam Microkeyer II. > > Is my FT8 signal being generated in which sound card? > > 73, Lou KE1F > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rreynold...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] No FT mode.
I have an 100% updated K3. Suddenly I lost capability to transmit FT8 mode. CW and SSB works OK, I do not know about RTTY. My K3 is connected to a MicroHam Microkeyer II. Is my FT8 signal being generated in which sound card? 73, Lou KE1F __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S Line in not working.
Jim and Dave, My K3S when in DATA mode, the MIC+LIN says "not APPL". Jim you must not be in DATA mode. You have to be in DATA mode to use the internal sound card for FT8. I got my K4D a year ago so it has been a while since I worried about such things. 73, Mark, WB9CIF -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Dave New, N8SBE Sent: Sunday, April 16, 2023 20:12 To: Jim Cary Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3S Line in not working. Jim, I have MIC+LIN set to off, I think so that the K3s doesn't pick up room noise when using data modes. Also, the mic level control on the front panel affects the line in level when you are in data a mode. In other modes, it is a mic level, instead. Hope that helps, -- Dave, N8SBE On 2023-04-16 14:33, Jim Cary wrote: > I Just received my K3S back from being serviced, but it doesn't appear > that the Line In is functioning. > > On FT8 I have the MIC+LIN set to ON, and MIC SEL to FPL.BIAS - same > settings as I have been using on my back-up K3. I am using the same > cabling between PC and both rigs, so there is no issue with any of > them. > > I've checked and double checked the Menu and Config settings between > the two radios and they are identical. > > Anyone have any idea of what I might be missing before I contact > Elecraft? > > Jim > W2SM > > > __ > Elecraft mailing list > Home: > http://mailma/ > n.qth.net%2Fmailman%2Flistinfo%2Felecraft=05%7C01%7C%7C4965f26ddf > ab4797d1f308db3eb70e3f%7C84df9e7fe9f640afb435%7C1%7C0%7C63 > 8172728156299308%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV > 2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=i2xj2fkNJf > HY98oqWyw%2FDVunljyV4kLFCm%2FI7kMSKj0%3D=0 > Help: > http://mailma/ > n.qth.net%2Fmmfaq.htm=05%7C01%7C%7C4965f26ddfab4797d1f308db3eb70e > 3f%7C84df9e7fe9f640afb435%7C1%7C0%7C638172728156299308%7CU > nknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha > WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=eS53FUoeiLqq%2BjXAh%2FADtXsq%2 > F3%2FNsVDvZ0WQQwkDh1U%3D=0 > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: > http://www.qs/ > l.net%2F=05%7C01%7C%7C4965f26ddfab4797d1f308db3eb70e3f%7C84df9e7f > e9f640afb435%7C1%7C0%7C638172728156299308%7CUnknown%7CTWFp > bGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn > 0%3D%7C3000%7C%7C%7C=X7TYOlbgi1%2Bbe2X5EVkS8axQdHdjsVW5lm3DC8YLg > Eo%3D=0 Please help support this email list: > http://www.qs/ > l.net%2Fdonate.html=05%7C01%7C%7C4965f26ddfab4797d1f308db3eb70e3f > %7C84df9e7fe9f640afb435%7C1%7C0%7C638172728156299308%7CUnk > nown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWw > iLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=iJDjOGgXPvlTDjq33VAzwJVqcm2p5Nb% > 2BVrJ8RHEjTu4%3D=0 > Message delivered to n8...@densbe.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net/ Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmus...@outlook.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S Line in not working.
Jim, I have MIC+LIN set to off, I think so that the K3s doesn't pick up room noise when using data modes. Also, the mic level control on the front panel affects the line in level when you are in data a mode. In other modes, it is a mic level, instead. Hope that helps, -- Dave, N8SBE On 2023-04-16 14:33, Jim Cary wrote: I Just received my K3S back from being serviced, but it doesn’t appear that the Line In is functioning. On FT8 I have the MIC+LIN set to ON, and MIC SEL to FPL.BIAS — same settings as I have been using on my back-up K3. I am using the same cabling between PC and both rigs, so there is no issue with any of them. I’ve checked and double checked the Menu and Config settings between the two radios and they are identical. Anyone have any idea of what I might be missing before I contact Elecraft? Jim W2SM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n8...@densbe.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft 80M SSB Net Announcement
Please join us on 3784 kHz (NOTE THE NEW FREQUENCY), 9PM ET Sunday (0100Z Monday). Note that the net stays on the same local time, when we switch back and forth to/from Daylight time, so the UTC time changes, but not the local time. Now that we have moved into Daylight time and have longer daylight hours, 80M may not be as strong as during the winter. Your net control this week will be Dave, N8SBE, although I've had intermittent antenna issues at high power the last few weeks. This seems to be an 80M only issue, for some reason. If I continue to have issues this evening, please listen for Eric, WB9JNZ, who has done a stellar job over the past few weeks of taking over as NCS after my hi-power station went down. This week we had more warmer weather, with a sunny days with high temps in the 70's and 80's, although a cold front is due this evening, and lows in the 30's and highs in the 40's and 50's are expected over the next few days. Hope to see you this evening on the net. 73, -- Dave, N8SBE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3S Line in not working.
I Just received my K3S back from being serviced, but it doesn’t appear that the Line In is functioning. On FT8 I have the MIC+LIN set to ON, and MIC SEL to FPL.BIAS — same settings as I have been using on my back-up K3. I am using the same cabling between PC and both rigs, so there is no issue with any of them. I’ve checked and double checked the Menu and Config settings between the two radios and they are identical. Anyone have any idea of what I might be missing before I contact Elecraft? Jim W2SM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com