[Elecraft] K3 Speaker for sale

[Alan Geller via Elecraft]

Elecraft SP3 Speaker for sale. Very clean. Shipping included. Pics available. 
$185 firm. Continental US only. Please contact Alan Geller …
k6...@arrl.net.  
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] ED VOL 237 Issue 7

[Alan Geller via Elecraft]

Sent from my iPhone
This issue is a real salute to the Elecraft Net . Submissions from 
knowledgeable folks who wanted to help. Some mild disagreements to be worked 
out without any snarky comments and a lot of good information and help. Hooray 
for Elecraft products and customers.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3(S)/P3 Excellent Example - SOLD

[Alan Geller via Elecraft]

My "K3(S)/P3 Excellent Example” just sold. Happy result for buyer and seller. 
My XYL just
Gave the thumbs up to buy my K4D. As this stage in life, no room for duplicates 
in the house.
Thanks for all queries; some folks looking only for K3 dual receiver 
example…..THATSA RADIO!!

Alan/K6ADG


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3(S)/P3 for sale - Exellent Example

[Alan Geller via Elecraft]

For Sale: K3(S)/P3. - K3 with nearly all (S) options in excellent condition. 
Very clean P3

K3 (S/N 4757) upgrades:
a. KTCXO3-1  1ppm txco
b. KSYN3AUPG  Syn Board u/g
c. KXV3B.  I/O  U/G
d. KIO3BUPKT.   I/O u/g
e. K5PF3/K5LSA-6K  Gen cov + AM 6k filter
f. All 5 filters bought or  u/g to 8 poles
g. K3SSKT.  Stainless h/w upgrade

2.  P3 -F
a. CBLP3Y.  K3S adapter cable

Included:all necessary cables, Paper and  digital manuals. Hard 
pelican case for K3

Results of 2016 factory checkout:
8 volt regulator filter cap installed
KPOD ready, FP R82 to 6.8 ohm
K3 audio protection board install
Front panel gold pins
Factory cal and alignment


Operation Pak 
Consists of Heil Goldline microphone with K3 cable, Heil large earphones and 
Bencher Iambic Paddle in Black. This is sold separately.
Although only with the XCVR.

PRICING
K3(S)/P3….$2,250
Operation Pak………   $145

Pictures available if interested. QSO available on HF. Shipping extra. Local 
pickup encouraged, Redwood City location.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Big Screen for K4

[Alan Geller via Elecraft]

  I am in the process of listing my superb K3/P3 in order to purchase a K4. I 
have watched Eric’s 
Videos demoing the K4 and there is always a large screen display connected to 
the K4. I planned
To keep my K4 setup clean and simple but the plethora of 24 inch TV’s on sale 
for under $100
Is speaking to me.
   So, I even think this is a dumb question, but if the std “video” port on the 
back panel of the K4 can
Use a std cable to  a TV set vs a “Monitor”, does the basic digital video 
mirror the front panel display?
Thanks for any help.

Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] CW Decode/Display system for your beloved K2

[Alan Geller via Elecraft]

For sale:

1. K2 fixed audio output board; professionaly built by W8FGU.. Unused.$37 plus 
shipping

2. A complete newish K42 CW Decoder/Display
System from www.hamcrafters.com  and professionaly 
built and tested by me.
Includes Keyboard, cables with software and manual on memory stick. $100 plus 
shipping

No.1 usually needed to feed no.2

Pics available if needed

Alan/K6ADG

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Microphone Setup Confusion

[Alan Geller via Elecraft]

Is what Elecraft calls mike “bias” in the K3 and K3s Owners handbooks 
Equivalent to the “48 volt ghost voltage” required for condenser mikes et al
In the broadcast and music industry ?

It is mentioned that “mike bias” needs to to be turned on for condenser type 
mikes
But off for dynamic types which is also equivalent for the more common 
Term  “48 volt ghost voltage”

Thanks for any help

Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] QRP and contesting

[Alan Geller via Elecraft]

Yea Wayne, thats the terrific Elecraft attitude that keeps your customer base 
strong and loyal. 
Its called, “ lets all have fun and learn something” Hooray for the serious 
high speed ops, a 
Lot of ex Navy guys, but its pretty easy to spot the slow lane and ease back 
into the fast lane.

Happy Veterans Day youse guys….K6ADG





I'm in this group. Casual contest operation, usually QRP, mostly CW, and almost 
always logging by hand.

I greatly appreciate all of the very serious ops out there who approach this 
with a high level of skill and give everyone -- regardless of ability -- that 
next QSO.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K2 Fixed Audio Mod

[Alan Geller via Elecraft]

I have a hamcrafters K42 CW Keyboard/reader that would go very well
With my 23 year old K2. I remember a kit-up article for a fixed audio output
Circuit for the K2. Can anyone point to that article?
If you have a clean little implementation of this item on a mini board, I would 
be happy
To trade a finished but unused “K2 combo feature board” with the rework elim. 
and
And mic.stickons. in an even swap. 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Seeking input on 3rd-party microphones used with our transceivers

[Alan Geller via Elecraft]

I have used the Heil Goldline with a GM-4 element for over 12 years and
Always get good great audio reports on my K3.

Alan…K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Help with the KX3 and FT8

[Alan Geller via Elecraft]

With FT8 coming on strong as a popular communications and testing tool, it is 
tempting to dedicate your KX3 to this mode for a slice of time each day. There 
has been little to no
update info for the KX3 with popular sound card interfaces (eg Signalink) as 
well as suggested
settings for the KX3 and WTSJ-x itself. A little info would be very much 
appreciated from Elecraft or a crafty
experienced user. Thanks in advance. alan….K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] XV144 External XVRTR connection to the KIO3B

[Alan Geller via Elecraft]

I have a finished and tested XV144 that was meant to pair with my K2 but issues 
prevented me from
adding the necessary features to my K2. Here I am years later wanting to now 
use this NIB XVRTR on
my fully upgraded K3 and the only “control” connection to the KIO3B seems to be 
from the 144’s DB-9
to the KIO3B’s RS232/RJ45. I have alan extra Elecraft K3/P3 “X"cable (E980297) 
which is the correct 
form-factor. Will this work for me if I follow the rules in the K3S manual and 
on page 5 of the XVRTR Users manual
Rev F1 of 2013? Thanks for any help or cautions.

Alan….K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Using a K42 Keyer with a K3/K3S

[Alan Geller via Elecraft]

Yes, I had a K42 kit laying about and i thought I might finally finish it and 
see how it worked with my K3 (with most of the S upgrades)
I was easily able to fix up the cables for reading code but I have had a heck 
of a time matching up settings and keying cable connections
so I can play around with the external keyer functionality of this little 
“swiss army knife keyer box”
I have Fred Cady’s third edition(Bless him) and he tries to give info in para 4 
of page 60 but it is somewhat confusing. There is lots of info
following, all the way to pp 84 but it is all oriented to getting a computer 
married to the K3 for digital modes. 
The key out mini plug from the K42 uses the three lines as tip: key middle: PTT 
and the body ground. They say that "the PTT output is
used primarily in HSCW mode or to key an amplifier or antenna relay” and the K3 
manual indicates that anything like a WinKey
interface requires that PTT_KEY should be OFF - OFF. So, it would seem that I 
could ignore the center conductor entirely.
But…my K3 sits quietly and challenges me to to key it externally disregarding 
all my options.

Any suggestions appreciated. Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Yamaha cm500 NIB for sale

[Alan Geller via Elecraft]

These are NIB without the box but with the box label and the unused cable 
adapters in a plastic bag. Not long
after I bought them, I went to a Pacificon conference and negotiated a full 
RS60 set for my K3 and have been very happy ever since.

$45 plus $10 toward the medium size Priority Mail Box.


Alan….K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Suggestions for Introducing a 10-year-old to Amateur Radio and Electronics

[Alan Geller via Elecraft]

Here is one more approach:

I took a pine 1X2 and cut it into 3” pieces ; then screwed a couple of 
Fahnstock clips into the
tops of each one near the ends. I then selected an assortment of 2 node 
components plus a
pile of 6” cut copper wire pieces.
Whoopee…we could then make stuff…doorbell plus switch, simple diode rcvr, then 
one with a
single transistor audio amp plus speaker (needs 3 NODE block), morse code key 
and buzzer
etc etc
Tiny stuff can be intimidating…so the blocks fit his way of playing and we were 
off and running.
A regen rcvr on a board for 40M can be a jump step and its all fun.

Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] WG0AT's KX2 matching unit

[Alan Geller via Elecraft]

WRT WG0AT’s video  https://youtu.be/HkeZhnJo1g4   
that Wayne Burdick just put on the group net,
It looks like the ubiquitis and handy BNC to banana plug adapter with a 
miniature single sided UNUN to the antenna and ground.
I know there is no such thing, but the video only gave a peek. All I know is 
that it is small, it looks like it has a minimalist matching 
thingis and it works.
If Steve or any other good fellow could tell us what it is, I would be 
interested. Mine always become more bigger and more complicated.

Cheers,

alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New products

[Alan Geller via Elecraft]

Knobs and and switches provide the illusion of control…and that my friends, is 
what life is all about 8^)  Elecraft
does a great job of giving us what we need while giving us what we want….which 
is the exception the Rolling
Stones would accept...

Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KX3 Output power rating

[Alan Geller via Elecraft]

The KX3 is now being positioned as the 15 watt big brother to the smaller KX2 
“up to 10 watts” version. The upper
limit on my KX3 power adjustment seems to have always been around 10.2 watts. 
How does one safely achieve this
15 watt performance? Does it require the new/upgrade heatsink plus a new 
firmware version? I have always used an
approx. 14 Volt power source.

I’m sure this has been addressed before but I don’t see the history…thanks for 
any observations.

alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KX3/PX3 Linux Utilities for Raspberry Pi?

[Alan Geller via Elecraft]

Please put me on the list of interested KX3 owners. The idea of Elecraft 
maintaining and qualifying this software is great,
but there is a lot of it and it will incur costs. However…it could be a 
productive and low cost path for Elecraft to evaluate
it’s next product line which could be a more highly integrated computer/RF 
system. Even though I have been in this business
most of my life, I am still amazed at the capability one can have for 
$35….almost enough for lunch for 2 in Silicon Valley.

Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] IC-7300 video - things to come

[Alan Geller via Elecraft]

Bill,
Your comment is appreciated. I am in your camp but we are a bit older and happy 
with our
current campfire. Younger hams and new hams might be very engaged with a 
touchscreen
interface. The “over $8 K” product managers seem to have peaked lately in their 
“plethora of knobs"
approach to the “mature ham market”. Elecraft is still the primo innovator with 
regard to performance,
packaging, reliability and clever circuit design.

Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [K3] Tokyo Hy-Power HL-1.2KFX amp interfacing (to ALC or not to ALC?)

[Alan Geller via Elecraft]

I have a THP HL-1.2KFX that I used before the acquisition of my K3. It is a 
reliable and resilient amp and I have had the ALC connected to the K3 for a 
year. However
I tend to take Don Wilhelms advice and there have been times when the ALC and 
SWR inputs to the AMP’s logic seem to fight each other, so I just disconnected
the ALC and will report any issues….silence = happiness.

I mourn the the shutdown THP after the earthquake/floods. It was a terrific 
company with a lot of great products with leadership in the mould of Elecraft.

Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] FS KAT 100-2 100 watt tuner kit NIB with all extras

[Alan Geller via Elecraft]

This allows the K2 100 watt amp/tuner upgrade to reside in an external matching 
box


- KAT 100-2 Kit NIB  
- EC2 ENCLOSURE NIB w/o un-needed front panel ( NEW REQUIRED PANELS ARE IN THE 
KAT100-2 KIT)
- ETS-15 EC2 TILT STAND NIB
- PRE-WOUND TOROIDS FROM Toroid guy Elecraft partner in original package

New price for all above is around $380; selling package for $225

Alan/K6ADG


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 to ProIII

[Alan Geller via Elecraft]

Hello All,
I have a terrific relative who looked at one of my few successful watercolor 
paintings and said “ I don’t like it, there isn’t enough detail “. Those of you 
who look inside
of the K3 and compare it to the ProIII by weight and contents represent one 
specific target market in this hobby and could possibly enjoy some good history 
books. 8^)

I enjoyed my ICOM products many years ago, but the Ele in EleCraft is well 
placed. 
Talk to your children more.


Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] SP3 External Speaker details

[Alan Geller via Elecraft]

Wayne,
Could you comment on what steps you took for RF isolation. I assume that since 
it wasn’t mentioned, there
is no small audio amp in the speaker box.

Thanks and Regards,

alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Help with High Current issues

[alan geller via Elecraft]

What is causing my my seemingly odd occurrence of a low SWR and a high current 
shutdown on my K3 ? It just happened this morning and is very worrisome.
Freq:  14.055SWR:  1.3:1Antenna:  OCF dipoleSending Dits: Random Hi Curr 
warning for 45 sec and then a shutdownSending Dahs: Random Hi Curr warning for 
10 sec and then a shutdownPower Supply: Gamma HPS-1aOther indications: dimming 
of backlight synched with XMIT approx 5 sec prior to shutdown
Thanks for any help...this is a new issue
AlanK6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Help with High Current issues

[alan geller via Elecraft]

Well, as soon as I sent my SOS, I realized I was telling all, I was too lazy to 
switch to a beefier power supply to figure that out. Our course, your 
suggestion solved that issue so I am getting double slow on the neuron 
pathways.The voltage went from 13.5 V to 9.5V on the 6th (set for 20WPM) dash 
and shutdown is around 9.2 V.Soo, my conclusion has to be that the SuperCaps in 
my trusty small/expensive power supply are getting tired.I just this minute 
read a review of the HPS by Phil Salas – AD5X, and he got a 2V drop at 10 WPM, 
so my unit seems to be out of spec and that is a different issue for this 
generally useful product.Thank you all for your quick response...Happy 2015
AlanK6ADG
 

 On Sunday, January 11, 2015 10:45 AM, James Bennett w6...@me.com wrote:
   
 

 What is your K3 showing as the voltage when you change the DISP to read that 
instead of VFO-B frequency? Low voltage would cause the current to increase to 
keep the power where you set it.

 On  Sunday, Jan 11, 2015, at  Sunday, 10:30 AM, alan geller via Elecraft 
 elecraft@mailman.qth.net wrote:
 
 What is causing my my seemingly odd occurrence of a low SWR and a high 
 current shutdown on my K3 ? It just happened this morning and is very 
 worrisome.
 Freq:  14.055SWR:  1.3:1Antenna:  OCF dipoleSending Dits: Random Hi Curr 
 warning for 45 sec and then a shutdownSending Dahs: Random Hi Curr warning 
 for 10 sec and then a shutdownPower Supply: Gamma HPS-1aOther indications: 
 dimming of backlight synched with XMIT approx 5 sec prior to shutdown
 Thanks for any help...this is a new issue
 AlanK6ADG


 
   
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] P

[Alan Geller]

 Lloopp p

Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] [K3] Birdies

[alan geller]

That looks a lot like an electric motor (washing machine) to me eg 
amplitude and distibution..just my experience. Better to look 
for horses instead of Zebras :-)

Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] Would a matching speaker be nice??

[alan geller]

Wayne, Eric and all us eager K3 owners,
How about a compromise between the factory and the customers which fits the 
Elecraft Zen. Elecraft already has most of the the parts we want eg a set of 
K3 side panels. The only 2 new parts would be a square cut front and back. The 
front would have 4 holes and a domed grill and the back just needs a few 
cutouts and maybe a stand added to the bottom (thats the left side K3 panel 
with the rubber standoffs). That would then make a speaker/power supply cabinet 
kit available for those who want it for no greater price penalty than
 the K2 panel kit which we all think was a great idea.
Perhaps a small prize for the best implementation..the best 3 1/2  speaker and 
PS combo. Lots of room for discussion..BTW, I'm sure this is not very original 
and was
 discussion by you fellows but the timing is good.

73's

Alan/K6ADG

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html