Re: [Elecraft] [K2] N1MM Logger sending CW to K2
There is no need for an expensive interface just to do CW Mike. The following link explains the process along with a warning about not doing so if it doesn't make sense to you: https://elecraft.mailman.qth.narkive.com/OwSJDzZd/how-do-you-get-n1mm-to-send-cw-to-the-k2 I will use the link's method to key my K2, once I finish (and start) building it. Or, you could use another USB to RS-232 converter, transistor, and resistor, and plug for the K2 Key jack. I prefer fewer, not more, cables. 73, Bill, K8TE -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K2] N1MM Logger sending CW to K2
Mike... I have this connection working. However, I use a microHAM CW interface between the radio and computer with its router software [sets up virtual ports and WinKey functionality] . This setup works cleanly and reliably. I'm no expert in this area, but my reading here on the list prompts me to say that a direct computer-to-radio setup for the K2 may not be possible. I'm sure others with expertise will help you out. ...robert On 12/14/2019 19:33, NJMike wrote: I am trying to setup my K2 with N1MM Logger so that I can send CW and phone from my Windows 10 tablet to the K2. I have the KIO2 cable built and just purchased the KUSB converter. I updated the driver for the converter (although I find no instructions that say this needs to be done). N1MM Logger now follows the radio band and correctly logs the contact. However, I cannot send CW from N1MM Logger to the K2. I get the following error message at the bottom of the Entry window: "Unable to send this CW because there is no CW port set in Config: " The user manual for N1MM Logger makes this comment: "N1MM Logger does not support the K2 “virtual keying” feature using commands sent to the K2 serial port." So I am confused as to whether or not it is even possible to set this up. Has anyone been able to do this? Any help is appreciated, and thanks! Mike -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to rc...@verizon.net -- Robert G Strickland, PhD ABPH - KE2WY rc...@verizon.net.usa Syracuse, New York, USA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [K2] N1MM Logger sending CW to K2
I am trying to setup my K2 with N1MM Logger so that I can send CW and phone from my Windows 10 tablet to the K2. I have the KIO2 cable built and just purchased the KUSB converter. I updated the driver for the converter (although I find no instructions that say this needs to be done). N1MM Logger now follows the radio band and correctly logs the contact. However, I cannot send CW from N1MM Logger to the K2. I get the following error message at the bottom of the Entry window: "Unable to send this CW because there is no CW port set in Config: " The user manual for N1MM Logger makes this comment: "N1MM Logger does not support the K2 “virtual keying” feature using commands sent to the K2 serial port." So I am confused as to whether or not it is even possible to set this up. Has anyone been able to do this? Any help is appreciated, and thanks! Mike -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
