Re: [Elecraft] {K3} New Upload of MCU stuck
I'm a newer user but I recall that is was not to be done through any other device if I recall rightly Elecraft or others. Fred/N0AZZ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: Tuesday, November 20, 2012 7:09 AM To: Bill Clarke Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] {K3} New Upload of MCU stuck Bill, I think what he learned is that one should not attempt to do a firmware load through the Microham Router. 73, Don W3FPR On 11/20/2012 6:17 AM, Bill Clarke wrote: It would be nice to share what you found - rather than just saying the answer is in the book(s). __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] {K3} New Upload of MCU stuck
I was uploading my newly arrived, upgraded and fixed K3 serial 1526 from the factory to the latest version and it froze with the MCU LD displayed and the K3 utility program asking to be closed. I was doing the upgrade of the MCU through a virtual port set up by Microham uRouter program and something did not go correctly. I need some help with this. I unplugged it and it doing the same thing. The transmit light is flashing and the MCU LD is displaying. I just received the K3 today after a month and I would like to get it working again. Keith AK6ZZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] {K3} New Upload of MCU stuck
Nevermind found in the Cady manual what I did wrong. Fred Cady’s book rocks!!! Keith AK6ZZ From: Ham Radio Sent: Monday, November 19, 2012 9:00 PM To: Elecraft group email Subject: {K3} New Upload of MCU stuck I was uploading my newly arrived, upgraded and fixed K3 serial 1526 from the factory to the latest version and it froze with the MCU LD displayed and the K3 utility program asking to be closed. I was doing the upgrade of the MCU through a virtual port set up by Microham uRouter program and something did not go correctly. I need some help with this. I unplugged it and it doing the same thing. The transmit light is flashing and the MCU LD is displaying. I just received the K3 today after a month and I would like to get it working again. Keith AK6ZZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] {K3} New Upload of MCU stuck
It would be nice to share what you found - rather than just saying the answer is in the book(s). Bill W2BLC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] {K3} New Upload of MCU stuck
The answer is actually in the K3 utility HELP files and works really well 73 Jay (K2TTT) -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill Clarke Sent: Tuesday, November 20, 2012 6:17 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] {K3} New Upload of MCU stuck It would be nice to share what you found - rather than just saying the answer is in the book(s). Bill W2BLC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] {K3} New Upload of MCU stuck
Bill, I think what he learned is that one should not attempt to do a firmware load through the Microham Router. 73, Don W3FPR On 11/20/2012 6:17 AM, Bill Clarke wrote: It would be nice to share what you found - rather than just saying the answer is in the book(s). __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] {K3} New Upload of MCU stuck
The recovery steps are in K3 Utility Help, Troubleshooting, MCU Boot Loader. 73 de Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ham Radio Sent: Monday, November 19, 2012 9:18 PM To: Elecraft group email Subject: Re: [Elecraft] {K3} New Upload of MCU stuck Nevermind found in the Cady manual what I did wrong. Fred Cady’s book rocks!!! Keith AK6ZZ From: Ham Radio Sent: Monday, November 19, 2012 9:00 PM To: Elecraft group email Subject: {K3} New Upload of MCU stuck I was uploading my newly arrived, upgraded and fixed K3 serial 1526 from the factory to the latest version and it froze with the MCU LD displayed and the K3 utility program asking to be closed. I was doing the upgrade of the MCU through a virtual port set up by Microham uRouter program and something did not go correctly. I need some help with this. I unplugged it and it doing the same thing. The transmit light is flashing and the MCU LD is displaying. I just received the K3 today after a month and I would like to get it working again. Keith AK6ZZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] {K3} New Upload of MCU stuck
Yes his manual directed me there. Keith AK6ZZ Sent from my iPhone please excuse typos On Nov 20, 2012, at 9:31 AM, Dick Dievendorff die...@comcast.net wrote: The recovery steps are in K3 Utility Help, Troubleshooting, MCU Boot Loader. 73 de Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ham Radio Sent: Monday, November 19, 2012 9:18 PM To: Elecraft group email Subject: Re: [Elecraft] {K3} New Upload of MCU stuck Nevermind found in the Cady manual what I did wrong. Fred Cady’s book rocks!!! Keith AK6ZZ From: Ham Radio Sent: Monday, November 19, 2012 9:00 PM To: Elecraft group email Subject: {K3} New Upload of MCU stuck I was uploading my newly arrived, upgraded and fixed K3 serial 1526 from the factory to the latest version and it froze with the MCU LD displayed and the K3 utility program asking to be closed. I was doing the upgrade of the MCU through a virtual port set up by Microham uRouter program and something did not go correctly. I need some help with this. I unplugged it and it doing the same thing. The transmit light is flashing and the MCU LD is displaying. I just received the K3 today after a month and I would like to get it working again. Keith AK6ZZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] {K3} New Upload of MCU stuck
Callsign is AK6ZZ. Sorry for the fat finger. Still early on west coast of US. Keith AK6ZZ Sent from my iPhone please excuse typos On Nov 20, 2012, at 5:28 AM, Keith Heimbold ag...@hotmail.com wrote: No problem. I tried uploading the firmware update through the virtual port created by uRouter program from MicroHam. This is a major no no. I followed the instructions as per Fred's manual that I needed to follow the bootstrap procedure for failed upload and found out that I needed a direct not virtual com port to do the upload and that using a virtual port will result in the issue of the upload locking up. I used a serial to serial connector after removing all connectors and followed the procedure cited in the help portion under troubleshooting and voila the firmware uploaded and alles en ordnung. Hope this helps. I was a bit excited when I was able to get the answer by reading cady's manual and I wanted to give Fred some props for his very thorough and helpful book on the K3. Keith AL6ZZ Sent from my iPhone please excuse typos On Nov 20, 2012, at 4:52 AM, Bill Clarke b...@w2blc.net wrote: It would be nice to share what you found - rather than just saying the answer is in the book(s). Bill W2BLC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] {K3} New Upload of MCU stuck
No problem. I tried uploading the firmware update through the virtual port created by uRouter program from MicroHam. This is a major no no. I followed the instructions as per Fred's manual that I needed to follow the bootstrap procedure for failed upload and found out that I needed a direct not virtual com port to do the upload and that using a virtual port will result in the issue of the upload locking up. I used a serial to serial connector after removing all connectors and followed the procedure cited in the help portion under troubleshooting and voila the firmware uploaded and alles en ordnung. Hope this helps. I was a bit excited when I was able to get the answer by reading cady's manual and I wanted to give Fred some props for his very thorough and helpful book on the K3. Keith AL6ZZ Sent from my iPhone please excuse typos On Nov 20, 2012, at 4:52 AM, Bill Clarke b...@w2blc.net wrote: It would be nice to share what you found - rather than just saying the answer is in the book(s). Bill W2BLC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html