Re: [Elecraft] Band Data output?
Hi Martin, K3 0 ---> band decoder BCD1 K3 1 ---> band decoder BCD2 K3 2 ---> band decoder BCD3 K3 3 ---> band decoder BCD4 should work to your needs I am using the first version of the band decoder from remoteqth.com You can drop me an email to dl2...@darc.de 73 de Chris, DL2MDU Am 09.08.2022 um 13:43 schrieb dm4im: Elecrafters, i control a 6*2 switch via a remoteqth.com Band Decoder II using RS-232 sniffing mode. Not happy with that. I like to switch to Band Data output from the 15-pin sub-D ACC connector, but am a bit confused. The band decoder manual shows connections labeled BCD-1 through BCD-4. The K3 manual labels it's outputs Band0 OUT through BAND3 OUT. What goes where? Thanks. Martin, DM4IM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to dl2...@darc.de __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Band Data output?
Elecrafters, i control a 6*2 switch via a remoteqth.com Band Decoder II using RS-232 sniffing mode. Not happy with that. I like to switch to Band Data output from the 15-pin sub-D ACC connector, but am a bit confused. The band decoder manual shows connections labeled BCD-1 through BCD-4. The K3 manual labels it's outputs Band0 OUT through BAND3 OUT. What goes where? Thanks. Martin, DM4IM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] band data from the RS232 port while using the USB cable?
Steve, I am not familiar with the Acom amp and its needs, but if it needs 4 discrete band data lines, those are available on the ACC connector. See the K3S manual for the pins. The only lines on the RS-232 line (or USB) are RXD, TXD and Signal Ground, and band data is present on the communications line when data is flowing because of communications with something like a logging program. 73, Don W3FPR On 9/12/2017 3:34 AM, Steve Steltzer via Elecraft wrote: Brand new to the K3S. Is there a way to get band data to control an Acom amp on the RS232 port while using the USB cable? I had a lot of trouble with Win10 assigning the radio to ports already in use when I tried using the RS232 port. Going in and manually changing the port number in Device Manager didn't work. Finally got it working using the USB cable and I really don't want to go through all that hassle again to try and get PC comms working using the RS232 port. Apparently when you select USB in the menu, it shuts off the RS232 port? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] band data from the RS232 port while using the USB cable?
Steve, >Apparently when you select USB in the menu, it shuts off the RS232 port? Not exactly. When using the USB port for CAT control of the radio, the RS232 (RJ45) port becomes a listen-only CAT echo of the responses sent by the K3S to the USB port. I am unfamiliar with the Acom amplifier's requirement for band info, but your amp will track K3S band data under the following conditions: - A conventional logging program is polling the radio on the USB port for band and frequency (which would result in K3S CAT responses emerging from the RS232 port) - The Acom is satisfied just hearing that CAT info (IOW - it does not generate it own queries and require responses. The SteppIR controller operates similarly ) -larry (K8UT) -Original Message- From: Steve Steltzer via Elecraft Sent: Tuesday, September 12, 2017 3:34 AM To: elecraft@mailman.qth.net Subject: [Elecraft] band data from the RS232 port while using the USB cable? Brand new to the K3S. Is there a way to get band data to control an Acom amp on the RS232 port while using the USB cable? I had a lot of trouble with Win10 assigning the radio to ports already in use when I tried using the RS232 port. Going in and manually changing the port number in Device Manager didn't work. Finally got it working using the USB cable and I really don't want to go through all that hassle again to try and get PC comms working using the RS232 port. Apparently when you select USB in the menu, it shuts off the RS232 port? Steve, WF3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@charter.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] band data from the RS232 port while using the USB cable?
Brand new to the K3S. Is there a way to get band data to control an Acom amp on the RS232 port while using the USB cable? I had a lot of trouble with Win10 assigning the radio to ports already in use when I tried using the RS232 port. Going in and manually changing the port number in Device Manager didn't work. Finally got it working using the USB cable and I really don't want to go through all that hassle again to try and get PC comms working using the RS232 port. Apparently when you select USB in the menu, it shuts off the RS232 port? Steve, WF3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Band Data
Is SPE 1.3K-FA already being shipped to customers? If it is similar to 1K-FA I would better use CAT control instead of band data. Makes the amp switching while K3 is in RX mode. 73, Igor UA9CDC - Original Message - From: Richard Solomon w1...@earthlink.net To: elecraft elecraft@mailman.qth.net Sent: Thursday, May 22, 2014 7:49 AM Subject: [Elecraft] Band Data When you switch bands on the K3, is Band Data available to the user ? Is that data written down anywhere, that I can get to ? Reason I ask, is I want to investigate building an interface between the K3 and the SPE 1.3K-FA Amp to facilitate automatic bandswitching on the Amp. 73, Dick, W1KSZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to ua9...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Band Data
When you switch bands on the K3, is Band Data available to the user ? Is that data written down anywhere, that I can get to ? Reason I ask, is I want to investigate building an interface between the K3 and the SPE 1.3K-FA Amp to facilitate automatic bandswitching on the Amp. 73, Dick, W1KSZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Band Data
I have an SPE 1K-FA and my K3 switches bands with no mods, just a cord. The band data is available on the 15 pin D Shell connector on the back. My TS-480SAT has some issues but does most of the functions. I don't know, but suspect that the 1.3K works like the 1K. Willis 'Cookie' Cooke, TDXS DX Chairman K5EWJ Trustee N5BPS, USS Cavalla, USS Stewart On Wednesday, May 21, 2014 8:50 PM, Richard Solomon w1...@earthlink.net wrote: When you switch bands on the K3, is Band Data available to the user ? Is that data written down anywhere, that I can get to ? Reason I ask, is I want to investigate building an interface between the K3 and the SPE 1.3K-FA Amp to facilitate automatic bandswitching on the Amp. 73, Dick, W1KSZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to wrco...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Band Data
How about using the BAND0-3 OUTPUT pins on the ACC jack? Bruce N1RX -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Richard Solomon Sent: Wednesday, May 21, 2014 9:50 PM To: elecraft Subject: [Elecraft] Band Data When you switch bands on the K3, is Band Data available to the user ? Is that data written down anywhere, that I can get to ? Reason I ask, is I want to investigate building an interface between the K3 and the SPE 1.3K-FA Amp to facilitate automatic bandswitching on the Amp. 73, Dick, W1KSZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Band Data
Dick, See pages 18 and 19 of the K3 Operator's Manual for information on the band data outputs. 73, Don W3FPR On 5/21/2014 9:49 PM, Richard Solomon wrote: When you switch bands on the K3, is Band Data available to the user ? Is that data written down anywhere, that I can get to ? Reason I ask, is I want to investigate building an interface between the K3 and the SPE 1.3K-FA Amp to facilitate automatic bandswitching on the Amp. 73, Dick, W1KSZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w3...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Band Data from the KX3 to KAT00
Is it possible to pull band data off the KX3 and send it to the KAT500 so it will follow the radio? Thanks, Dan -- KM6CQ Dan Baker www.km6cq.com @danielbaker DM09dn SKCC: 8260 NAQCC: 6817 QSL via LoTW, eQSL, Direct. D-Star REF014C __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Band data outpurs
Can anyone tell me if the K-3 band data outputs are the same as Yaesu? If so, what are the pin equivalents? I would like to use my K3 with an Array Solutions band decoder (an older style. Jim W0UO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Band data outpurs
Can anyone tell me if the K-3 band data outputs are the same as Yaesu? If so, what are the pin equivalents? I would like to use my K3 with an Array Solutions band decoder (an older style. Please see the K2 Owner's Manual for details. The information is on pages 18 and 19 in the Rev D-5 manual. 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Band data outputs
Please see the K2 Owner's Manual for details. The information is on pages 18 and 19 in the Rev D-5 manual. I meant K3... 73, Lyle KK7P (searching for my coffee...) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Band data outpurs
Yes. Please see N0SS's excellent documentation on connecting the K3 to a Quadra amplifier. The cable shown on that page (http://www.n0ss.net/k3-to-quadra_12jul09.pdf) will give you all of the corresponding pins between the K3 ACC jack and the Yaesu (DIN8/262) Band Data jack. 73, ... Joe, W4TV -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of w0uo Sent: Tuesday, November 17, 2009 12:15 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Band data outpurs Can anyone tell me if the K-3 band data outputs are the same as Yaesu? If so, what are the pin equivalents? I would like to use my K3 with an Array Solutions band decoder (an older style. Jim W0UO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Band data outpurs
I'm using N0SS's cable on my K3/Quadra. Works like a dream. Made one mod and was to bring out the lines needed to drive an FSK operation. Basically, made a Y connector for the accessory port. de K2GN/Larry K3 - S/N 3278 - Original Message - From: Joe Subich, W4TV li...@subich.com To: 'w0uo' w...@citbroadband.com; elecraft@mailman.qth.net Sent: Tuesday, November 17, 2009 6:36 PM Subject: Re: [Elecraft] Band data outpurs Yes. Please see N0SS's excellent documentation on connecting the K3 to a Quadra amplifier. The cable shown on that page (http://www.n0ss.net/k3-to-quadra_12jul09.pdf) will give you all of the corresponding pins between the K3 ACC jack and the Yaesu (DIN8/262) Band Data jack. 73, ... Joe, W4TV -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of w0uo Sent: Tuesday, November 17, 2009 12:15 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Band data outpurs Can anyone tell me if the K-3 band data outputs are the same as Yaesu? If so, what are the pin equivalents? I would like to use my K3 with an Array Solutions band decoder (an older style. Jim W0UO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Band data
Is it possible to access K2 band data information in order to make it available in some format to control external devices?. Thanks for any help. Jim G4NWJ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Band data
Sure Jim .. it's called the KRC2 :) de w1rt/john (KRC2 user) On 3/14/06, Jim Chick [EMAIL PROTECTED] wrote: Is it possible to access K2 band data information in order to make it available in some format to control external devices?. Thanks for any help. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Band data
I can answer that. By far the best way to get band data is to decode the frequency returned by an IF; serial command. Having the frequency allows you quite a bit of freedom in what you do with it, especially since you can create sub bands or segments within each band. This could be useful in determining if you are at the low or high end of a band or even outside a band. It is also FAR, FAR easier to decode than the AuxBus information... Now, having said all this, probably the easiest way to deal with it it to use a KRC2, which decodes either AuxBus or serial band data for you. You just tap into the various drivers (or the BCD output terminals) and use the information directly. On Mar 14, 2006, at 9:55 AM, Jim Chick wrote: Is it possible to access K2 band data information in order to make it available in some format to control external devices?. Thanks for any help. Jim G4NWJ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com - Jack Brindle, W6FB - ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Band data
Jack Is there some way to decode band segment info with KRC2? I don't recall seeing anything about that when I built mine. Does it take some additional utility software to set this up, assuming it's even possible. Boy, that would sure be handy. 73, Bob N6WG -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jack Brindle Sent: Tuesday, March 14, 2006 10:11 AM To: [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] Band data I can answer that. By far the best way to get band data is to decode the frequency returned by an IF; serial command. Having the frequency allows you quite a bit of freedom in what you do with it, especially since you can create sub bands or segments within each band. This could be useful in determining if you are at the low or high end of a band or even outside a band. It is also FAR, FAR easier to decode than the AuxBus information... Now, having said all this, probably the easiest way to deal with it it to use a KRC2, which decodes either AuxBus or serial band data for you. You just tap into the various drivers (or the BCD output terminals) and use the information directly. On Mar 14, 2006, at 9:55 AM, Jim Chick wrote: Is it possible to access K2 band data information in order to make it available in some format to control external devices?. Thanks for any help. Jim G4NWJ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com - Jack Brindle, W6FB - ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com