Re: [Elecraft] FT8 with KX3 and MacBook Pro
I have used JTBridge and liked it but these days my favorite set up is the combination of WSJT-X and RUMLogNG without JTBridge. After setting up, using the instructions in RUMLog, I am able to see Spots from the Clusters intermixed with local WSJT-x spots in the "DXSpots" window. This allows me use RUMLog's excellent color coding system to decide it I need the Country or Zone in FT8 or any other mode in one window. Clicking a station in WSJT brings it up in RUMLog, shows previous contacts with that station or that Country. Logging is a one click operation that also can be set to upload it to ClubLog and/or LoTW. Makes for a nicely integrated set up. Rick K6LE On Sat, Mar 3, 2018 at 12:28 PM, Walter Underwoodwrote: > Agreed, you probably want to use JT-Bridge. Read the instructions at the > JTBridge site to get the right configurations and the right startup order > for JT-Bridge, WSJT-X, and your logging application. > > http://jt-bridge.eller.nu/ > > wunder > K6WRU > Walter Underwood > CM87wj > http://observer.wunderwood.org/ (my blog) > > > On Mar 3, 2018, at 10:22 AM, James Bennett wrote: > > > > Hi Phil, > > > > No cookbook here, but I do have a MacBook Pro / Retina, WSJT-X, and MLDX > and occasionally run my KX3 with them. A couple items to consider: > > > > —> Strongly suggest running JTBRIDGE if you do not already have it. It > interfaces very, very nicely between WSJT-X and MLDX. Allows, among other > things, your completed WSJT-X QSOs to be automatically logged into MLDX. > > > > —> You may run into issues where the audio from WSJT-X output is routed > to your MacBook’s internal speakers instead of the external sound card - > not a good thing. This is a problem that has been happening for several > years sporadically to Mac users. It “may” be related to something Apple did > to USB2 code. There have been several work-arounds posted. One is to try > USB3 if your MacBook has it. Another is to set your MIDI output to 44,100 > instead of 48,000. And another, the one I use, is a USB to Thunderbolt > adapter. My external sound card is a Tascam US-125M with USB output. I got > the adapter on Amazon and plug the sound card into the Thunderbolt adapter. > Works great. > > > > Jim / W6JHB > > > > > > > >> On Mar 3, 2018, at 4:12 AM, Philip Alley wrote: > >> > >> Is there a complete “cookbook” for running FT8 with the KX3+PX3 and a > MacBook Pro (w OSX 10.13.3)? I am running MacLogger DX and have ordered a > Sabrent USB-C tiny sound card. The WSJT-X is downloaded but not set up > yet. My KX3 is already communicating with Maclogger DX via USB. > >> > >> I am unsure about the additional cabling I need and best strategy for > rig control. > >> > >> Any suggestions from anyone who has been down this road will be greatly > appreciated. > >> > >> TNX > >> Phil > >> AA2EA > >> Louisville > >> __ > >> Elecraft mailing list > >> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >> Help: http://mailman.qth.net/mmfaq.htm > >> Post: mailto:Elecraft@mailman.qth.net > >> > >> This list hosted by: http://www.qsl.net > >> Please help support this email list: http://www.qsl.net/donate.html > >> Message delivered to w6...@me.com > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to wun...@wunderwood.org > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rick.prat...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] FT8 with KX3 and MacBook Pro
Agreed, you probably want to use JT-Bridge. Read the instructions at the JTBridge site to get the right configurations and the right startup order for JT-Bridge, WSJT-X, and your logging application. http://jt-bridge.eller.nu/ wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Mar 3, 2018, at 10:22 AM, James Bennettwrote: > > Hi Phil, > > No cookbook here, but I do have a MacBook Pro / Retina, WSJT-X, and MLDX and > occasionally run my KX3 with them. A couple items to consider: > > —> Strongly suggest running JTBRIDGE if you do not already have it. It > interfaces very, very nicely between WSJT-X and MLDX. Allows, among other > things, your completed WSJT-X QSOs to be automatically logged into MLDX. > > —> You may run into issues where the audio from WSJT-X output is routed to > your MacBook’s internal speakers instead of the external sound card - not a > good thing. This is a problem that has been happening for several years > sporadically to Mac users. It “may” be related to something Apple did to USB2 > code. There have been several work-arounds posted. One is to try USB3 if your > MacBook has it. Another is to set your MIDI output to 44,100 instead of > 48,000. And another, the one I use, is a USB to Thunderbolt adapter. My > external sound card is a Tascam US-125M with USB output. I got the adapter on > Amazon and plug the sound card into the Thunderbolt adapter. Works great. > > Jim / W6JHB > > > >> On Mar 3, 2018, at 4:12 AM, Philip Alley wrote: >> >> Is there a complete “cookbook” for running FT8 with the KX3+PX3 and a >> MacBook Pro (w OSX 10.13.3)? I am running MacLogger DX and have ordered a >> Sabrent USB-C tiny sound card. The WSJT-X is downloaded but not set up yet. >> My KX3 is already communicating with Maclogger DX via USB. >> >> I am unsure about the additional cabling I need and best strategy for rig >> control. >> >> Any suggestions from anyone who has been down this road will be greatly >> appreciated. >> >> TNX >> Phil >> AA2EA >> Louisville >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to w6...@me.com > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wun...@wunderwood.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] FT8 with KX3 and MacBook Pro
Hi Phil, No cookbook here, but I do have a MacBook Pro / Retina, WSJT-X, and MLDX and occasionally run my KX3 with them. A couple items to consider: —> Strongly suggest running JTBRIDGE if you do not already have it. It interfaces very, very nicely between WSJT-X and MLDX. Allows, among other things, your completed WSJT-X QSOs to be automatically logged into MLDX. —> You may run into issues where the audio from WSJT-X output is routed to your MacBook’s internal speakers instead of the external sound card - not a good thing. This is a problem that has been happening for several years sporadically to Mac users. It “may” be related to something Apple did to USB2 code. There have been several work-arounds posted. One is to try USB3 if your MacBook has it. Another is to set your MIDI output to 44,100 instead of 48,000. And another, the one I use, is a USB to Thunderbolt adapter. My external sound card is a Tascam US-125M with USB output. I got the adapter on Amazon and plug the sound card into the Thunderbolt adapter. Works great. Jim / W6JHB > On Mar 3, 2018, at 4:12 AM, Philip Alleywrote: > > Is there a complete “cookbook” for running FT8 with the KX3+PX3 and a MacBook > Pro (w OSX 10.13.3)? I am running MacLogger DX and have ordered a Sabrent > USB-C tiny sound card. The WSJT-X is downloaded but not set up yet. My KX3 > is already communicating with Maclogger DX via USB. > > I am unsure about the additional cabling I need and best strategy for rig > control. > > Any suggestions from anyone who has been down this road will be greatly > appreciated. > > TNX > Phil > AA2EA > Louisville > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w6...@me.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] FT8 with KX3 and MacBook Pro
Phil, Do use Don's advice on setting up soundcards with Elecraft radios for digital modes. I found this pdf from KA9EAK in setting-up my mobile KX3 for Winmor and packet. For me it is a work in progress as I'm waiting for a couple of connectors to arrive. He uses the term PC - not specifically for a MacPro - but might be helpful: http://www.voyageurlutherie.com/docs/KX2%20Digital%20Mode%20Configuration%20Examples.pdf 73 George AI4VZ From: Don Wilhelm Phil, There is no "cookbook" that I am aware of. BUT - FT8 is no different than any other digital mode, although the application software may be a bit different. Connect the soundcard input to the headphone jack and the soundcard output to the MIC input. Connect the KXUSB cable to the computer. Use DATA A mode (not SSB). If you are completely new to digital modes, you might try PSK31 first using FLdigi or Ham Radio Deluxe to get used to it. One last IMPORTANT point - Elecraft radios are different than other manufacturers transceivers. Much of the internet advice (and some software instructions) will tell you to set the power high and use the audio level to control the power. That does NOT work with Elecraft radios. You must first set the audio to produce 4 bars with the 5th bar flashing on the ALC meter. Leave it set there and control the power with the power knob. See the article on my website www.w3fpr.com - scroll down to the bottom of the left column and click on the link. 73, Don W3FPR On 3/3/2018 7:12 AM, Philip Alley wrote: Is there a complete “cookbook” for running FT8 with the KX3+PX3 and a MacBook Pro (w OSX 10.13.3)? I am running MacLogger DX and have ordered a Sabrent USB-C tiny sound card. The WSJT-X is downloaded but not set up yet. My KX3 is already communicating with Maclogger DX via USB. I am unsure about the additional cabling I need and best strategy for rig control. Any suggestions from anyone who has been down this road will be greatly appreciated. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] FT8 with KX3 and MacBook Pro
Phil, There is no "cookbook" that I am aware of. BUT - FT8 is no different than any other digital mode, although the application software may be a bit different. Connect the soundcard input to the headphone jack and the soundcard output to the MIC input. Connect the KXUSB cable to the computer. Use DATA A mode (not SSB). If you are completely new to digital modes, you might try PSK31 first using FLdigi or Ham Radio Deluxe to get used to it. One last IMPORTANT point - Elecraft radios are different than other manufacturers transceivers. Much of the internet advice (and some software instructions) will tell you to set the power high and use the audio level to control the power. That does NOT work with Elecraft radios. You must first set the audio to produce 4 bars with the 5th bar flashing on the ALC meter. Leave it set there and control the power with the power knob. See the article on my website www.w3fpr.com - scroll down to the bottom of the left column and click on the link. 73, Don W3FPR On 3/3/2018 7:12 AM, Philip Alley wrote: Is there a complete “cookbook” for running FT8 with the KX3+PX3 and a MacBook Pro (w OSX 10.13.3)? I am running MacLogger DX and have ordered a Sabrent USB-C tiny sound card. The WSJT-X is downloaded but not set up yet. My KX3 is already communicating with Maclogger DX via USB. I am unsure about the additional cabling I need and best strategy for rig control. Any suggestions from anyone who has been down this road will be greatly appreciated. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FT8 with KX3 and MacBook Pro
Is there a complete “cookbook” for running FT8 with the KX3+PX3 and a MacBook Pro (w OSX 10.13.3)? I am running MacLogger DX and have ordered a Sabrent USB-C tiny sound card. The WSJT-X is downloaded but not set up yet. My KX3 is already communicating with Maclogger DX via USB. I am unsure about the additional cabling I need and best strategy for rig control. Any suggestions from anyone who has been down this road will be greatly appreciated. TNX Phil AA2EA Louisville __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] FT8 and KX3
Only one program can control a serial port. I log to wsjt and then after the session import the ".adi" file into my logger. Use Cortana or other search to locate the ado file. Sent from my iPhone ...nr4c. bill > On Oct 22, 2017, at 4:33 PM, Bill Frantzwrote: > > I get this message whenever I have another program using the USB<-->Serial > port to the KX3. It is most often my logging program. I just quit the logging > program, click "Retry" in WSJT-X and everything is OK. > > 73 Bill AE6JV > >> On 10/20/17 at 2:29 PM, donw...@embarqmail.com (Don Wilhelm) wrote: >> >> Bob, >> >> Select the K3 in Hamlib if the KX3 is not present in the selections. >> Other than that I cannot help much with the computer end setup. >> >> FT8 is no different than other soundcard data modes. >> >> On the KX3 part, set the DATA mode to DATA A. Ignore the common internet >> advice for setting the audio and power levels (and the WSJT-X instructions), >> and set the KX3 audio level to indicate 4 bars on the ALC meter with the 5th >> bar flashing. Control the power with the power knob. >> >> There is an article on my website www.w3fpr.com to assist you with setting >> the audio level. Scroll down to the bottom of the left column and click on >> the link. >> >> 73, >> Don W3FPR >> >>> On 10/20/2017 4:54 PM, Bob Cutter wrote: >>> New to FT8 and KX3 operation. >>> >>> I cannot seem to get them communicating. Error message hamlib failure. >>> > > --- > Bill Frantz|"After all, if the conventional wisdom was working, the > 408-356-8506 | rate of systems being compromised would be going down, > www.pwpconsult.com | wouldn't it?" -- Marcus Ranum > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] FT8 and KX3
I get this message whenever I have another program using the USB<-->Serial port to the KX3. It is most often my logging program. I just quit the logging program, click "Retry" in WSJT-X and everything is OK. 73 Bill AE6JV On 10/20/17 at 2:29 PM, donw...@embarqmail.com (Don Wilhelm) wrote: Bob, Select the K3 in Hamlib if the KX3 is not present in the selections. Other than that I cannot help much with the computer end setup. FT8 is no different than other soundcard data modes. On the KX3 part, set the DATA mode to DATA A. Ignore the common internet advice for setting the audio and power levels (and the WSJT-X instructions), and set the KX3 audio level to indicate 4 bars on the ALC meter with the 5th bar flashing. Control the power with the power knob. There is an article on my website www.w3fpr.com to assist you with setting the audio level. Scroll down to the bottom of the left column and click on the link. 73, Don W3FPR On 10/20/2017 4:54 PM, Bob Cutter wrote: New to FT8 and KX3 operation. I cannot seem to get them communicating. Error message hamlib failure. --- Bill Frantz|"After all, if the conventional wisdom was working, the 408-356-8506 | rate of systems being compromised would be going down, www.pwpconsult.com | wouldn't it?" -- Marcus Ranum __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] FT8 and KX3
Bob, Select the K3 in Hamlib if the KX3 is not present in the selections. Other than that I cannot help much with the computer end setup. FT8 is no different than other soundcard data modes. On the KX3 part, set the DATA mode to DATA A. Ignore the common internet advice for setting the audio and power levels (and the WSJT-X instructions), and set the KX3 audio level to indicate 4 bars on the ALC meter with the 5th bar flashing. Control the power with the power knob. There is an article on my website www.w3fpr.com to assist you with setting the audio level. Scroll down to the bottom of the left column and click on the link. 73, Don W3FPR On 10/20/2017 4:54 PM, Bob Cutter wrote: New to FT8 and KX3 operation. I cannot seem to get them communicating. Error message hamlib failure. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FT8 and KX3
New to FT8 and KX3 operation. I cannot seem to get them communicating. Error message hamlib failure. Suggestions? Bob KI0G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com