Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58
Well that must be the result of what Jack said about loading the aux buss if the KAT is off when you turn on the K3. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-KPA500-KAT500-revs-4-83-1-38-1-58-tp7584490p7584600.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58
I think I found a little thing to improve. the KAT500 can miss a frequency update from the K3 in a certain situation To replicate: - Switch everything on and operate the KAT/KPA/K3 combo as usual with KAT500 in manual mode - Activate the KAT500 utility for monitoring the KAT500 and select the Operate tab, here you can see the last observed frequency. See that KAT500 follows theK3 freq and switches accordingly. Now - set the KAT to BYPass - Change K3 freq, note that the KAT500 freq info does not follow this. - Switch KAT to MANual, note that the freq info is still not there - now transmit with the K3, note that the KAT detects the frequency now and switches to the appropriate setting (the old way). Improvement = KAT500 follows K3 freq in all KAT modes. so also in BYPass, and switches to the right setting as soon as you switch to MANual or AUTO. 73 Arie PA3A __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58
Yes, The KAT500 needed to be powered first. I also used to do that. That was in the 'older firmware times'. With the current FW, up till now I never bumped into any issue no matter which device was turned on first. Arie PA3A Jack Brindle schreef op 21-2-2014 20:34: The KAT500 needs to be powered on whenever the K3 is on in order to avoid loading the Auxbus. It can be powered up at the same time, but must be on before the K3 completes its initialization. The KPA500 has no restriction, and can be powered on any time before or after the K3 is turned on. Jack Brindle, W6FB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58
My KAT goes on with the bench power supply. Then I turn on the K3 and the the KPA. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-KPA500-KAT500-revs-4-83-1-38-1-58-tp7584490p7584553.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58
Here is how to make it fail: Disconnect the power completely from the KAT500 (maybe the micro in it stays on when it is powered off). Turn off the K3 with its power switch with the KPA turned on. Turn on the K3 with the KPA500 on. I get either a blank K3 LCD display or it is hung up. To recover: Turn the power supply to the k3 off. Plug in the power cable to the KAT500 (I use the same supply as the K3 with a Rig runner that powers everything up at once when the K3 turns on). Turn the K3 and KAT500 power supply on. Hit the Power On button on the K3. YMMV. 73 all, Fred KE7X The Elecraft K3: Design, Configuration and Operation 2nd ed The Elecraft KX3 - Going for the summit www.ke7x.com or www.lulu.com (Coming soon: The Elecraft KPA500 and KAT500 - the K-Line Dream Station) -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Arie Kleingeld PA3A Sent: Saturday, February 22, 2014 3:51 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58 Yes, The KAT500 needed to be powered first. I also used to do that. That was in the 'older firmware times'. With the current FW, up till now I never bumped into any issue no matter which device was turned on first. Arie PA3A Jack Brindle schreef op 21-2-2014 20:34: The KAT500 needs to be powered on whenever the K3 is on in order to avoid loading the Auxbus. It can be powered up at the same time, but must be on before the K3 completes its initialization. The KPA500 has no restriction, and can be powered on any time before or after the K3 is turned on. Jack Brindle, W6FB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58
Oh yes, I remember now yesterday I got a soft fault on the KPA500. I turned on the K3, the KAT500 went to the pretuned setting on 40M and then I turned on the KPA500 and clicked it into operate. I said one word and the KPA500 went to standby. No red lights. I returned it to operate and everything worked well. Forgot about that...not a problem, but don't know why it did that. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-KPA500-KAT500-revs-4-83-1-38-1-58-tp7584490p7584507.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58
Chuck, I seem to remember reading that the order of turning on the K-line is important. I always turn on the KAT500, then the KPA500 followed by the K3/P3. I have not had any issues doing things in that order. Maybe this is why you had the 'problem'? 73 Stephen G4SJP On 21 February 2014 10:19, ke9uw c-haw...@illinois.edu wrote: Oh yes, I remember now yesterday I got a soft fault on the KPA500. I turned on the K3, the KAT500 went to the pretuned setting on 40M and then I turned on the KPA500 and clicked it into operate. I said one word and the KPA500 went to standby. No red lights. I returned it to operate and everything worked well. Forgot about that...not a problem, but don't know why it did that. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-KPA500-KAT500-revs-4-83-1-38-1-58-tp7584490p7584507.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58
The KAT500 needs to be powered on whenever the K3 is on in order to avoid loading the Auxbus. It can be powered up at the same time, but must be on before the K3 completes its initialization. The KPA500 has no restriction, and can be powered on any time before or after the K3 is turned on. Jack Brindle, W6FB On Feb 21, 2014, at 2:23 AM, Stephen Prior eastbrantw...@gmail.com wrote: Chuck, I seem to remember reading that the order of turning on the K-line is important. I always turn on the KAT500, then the KPA500 followed by the K3/P3. I have not had any issues doing things in that order. Maybe this is why you had the 'problem'? 73 Stephen G4SJP On 21 February 2014 10:19, ke9uw c-haw...@illinois.edu wrote: Oh yes, I remember now yesterday I got a soft fault on the KPA500. I turned on the K3, the KAT500 went to the pretuned setting on 40M and then I turned on the KPA500 and clicked it into operate. I said one word and the KPA500 went to standby. No red lights. I returned it to operate and everything worked well. Forgot about that...not a problem, but don't know why it did that. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-KPA500-KAT500-revs-4-83-1-38-1-58-tp7584490p7584507.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58
Sounds great but most of the time my KAT500 won't turn on until I turn on the K3. What now? ...bill nr4c Sent from my Verizon Wireless 4G LTE DROID Jack Brindle jackbrin...@me.com wrote: The KAT500 needs to be powered on whenever the K3 is on in order to avoid loading the Auxbus. It can be powered up at the same time, but must be on before the K3 completes its initialization. The KPA500 has no restriction, and can be powered on any time before or after the K3 is turned on. Jack Brindle, W6FB On Feb 21, 2014, at 2:23 AM, Stephen Prior eastbrantw...@gmail.com wrote: Chuck, I seem to remember reading that the order of turning on the K-line is important. I always turn on the KAT500, then the KPA500 followed by the K3/P3. I have not had any issues doing things in that order. Maybe this is why you had the 'problem'? 73 Stephen G4SJP On 21 February 2014 10:19, ke9uw c-haw...@illinois.edu wrote: Oh yes, I remember now yesterday I got a soft fault on the KPA500. I turned on the K3, the KAT500 went to the pretuned setting on 40M and then I turned on the KPA500 and clicked it into operate. I said one word and the KPA500 went to standby. No red lights. I returned it to operate and everything worked well. Forgot about that...not a problem, but don't know why it did that. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-KPA500-KAT500-revs-4-83-1-38-1-58-tp7584490p7584507.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58
You might want to say how you have the KAT powered. In my station I have a relay-switch power panel that I built. The relay is powered by the K3’s 12V output jack. When the K3 turns on, it powers the relay, which the switches 12V power to the various station boxes, including the KAT500. By the time the K3 is ready to talk to the KAT, it is awake and listening, as is the KRC2, P3, etc... Jack B, W6FB On Feb 21, 2014, at 5:44 PM, bill conkling n...@widomaker.com wrote: Sounds great but most of the time my KAT500 won't turn on until I turn on the K3. What now? ...bill nr4c Sent from my Verizon Wireless 4G LTE DROID Jack Brindle jackbrin...@me.com wrote: The KAT500 needs to be powered on whenever the K3 is on in order to avoid loading the Auxbus. It can be powered up at the same time, but must be on before the K3 completes its initialization. The KPA500 has no restriction, and can be powered on any time before or after the K3 is turned on. Jack Brindle, W6FB On Feb 21, 2014, at 2:23 AM, Stephen Prior eastbrantw...@gmail.com wrote: Chuck, I seem to remember reading that the order of turning on the K-line is important. I always turn on the KAT500, then the KPA500 followed by the K3/P3. I have not had any issues doing things in that order. Maybe this is why you had the 'problem'? 73 Stephen G4SJP On 21 February 2014 10:19, ke9uw c-haw...@illinois.edu wrote: Oh yes, I remember now yesterday I got a soft fault on the KPA500. I turned on the K3, the KAT500 went to the pretuned setting on 40M and then I turned on the KPA500 and clicked it into operate. I said one word and the KPA500 went to standby. No red lights. I returned it to operate and everything worked well. Forgot about that...not a problem, but don't know why it did that. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-KPA500-KAT500-revs-4-83-1-38-1-58-tp7584490p7584507.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58
It's plugged into the same PS as the K3. ...bill Sent from my Verizon Wireless 4G LTE DROID Jack Brindle jackbrin...@me.com wrote: You might want to say how you have the KAT powered. In my station I have a relay-switch power panel that I built. The relay is powered by the K3’s 12V output jack. When the K3 turns on, it powers the relay, which the switches 12V power to the various station boxes, including the KAT500. By the time the K3 is ready to talk to the KAT, it is awake and listening, as is the KRC2, P3, etc... Jack B, W6FB On Feb 21, 2014, at 5:44 PM, bill conkling n...@widomaker.com wrote: Sounds great but most of the time my KAT500 won't turn on until I turn on the K3. What now? ...bill nr4c Sent from my Verizon Wireless 4G LTE DROID Jack Brindle jackbrin...@me.com wrote: The KAT500 needs to be powered on whenever the K3 is on in order to avoid loading the Auxbus. It can be powered up at the same time, but must be on before the K3 completes its initialization. The KPA500 has no restriction, and can be powered on any time before or after the K3 is turned on. Jack Brindle, W6FB On Feb 21, 2014, at 2:23 AM, Stephen Prior eastbrantw...@gmail.com wrote: Chuck, I seem to remember reading that the order of turning on the K-line is important. I always turn on the KAT500, then the KPA500 followed by the K3/P3. I have not had any issues doing things in that order. Maybe this is why you had the 'problem'? 73 Stephen G4SJP On 21 February 2014 10:19, ke9uw c-haw...@illinois.edu wrote: Oh yes, I remember now yesterday I got a soft fault on the KPA500. I turned on the K3, the KAT500 went to the pretuned setting on 40M and then I turned on the KPA500 and clicked it into operate. I said one word and the KPA500 went to standby. No red lights. I returned it to operate and everything worked well. Forgot about that...not a problem, but don't know why it did that. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-KPA500-KAT500-revs-4-83-1-38-1-58-tp7584490p7584507.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58
Check the KAT500 configuration Initial Power screen to see if Power On When DC Power Applied is checked. Fred KE7X -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of bill conkling Sent: Friday, February 21, 2014 7:47 PM To: Jack Brindle Cc: elecraft Subject: Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58 It's plugged into the same PS as the K3. ...bill Sent from my Verizon Wireless 4G LTE DROID Jack Brindle jackbrin...@me.com wrote: You might want to say how you have the KAT powered. In my station I have a relay-switch power panel that I built. The relay is powered by the K3’s 12V output jack. When the K3 turns on, it powers the relay, which the switches 12V power to the various station boxes, including the KAT500. By the time the K3 is ready to talk to the KAT, it is awake and listening, as is the KRC2, P3, etc... Jack B, W6FB On Feb 21, 2014, at 5:44 PM, bill conkling n...@widomaker.com wrote: Sounds great but most of the time my KAT500 won't turn on until I turn on the K3. What now? ...bill nr4c Sent from my Verizon Wireless 4G LTE DROID Jack Brindle jackbrin...@me.com wrote: The KAT500 needs to be powered on whenever the K3 is on in order to avoid loading the Auxbus. It can be powered up at the same time, but must be on before the K3 completes its initialization. The KPA500 has no restriction, and can be powered on any time before or after the K3 is turned on. Jack Brindle, W6FB On Feb 21, 2014, at 2:23 AM, Stephen Prior eastbrantw...@gmail.com wrote: Chuck, I seem to remember reading that the order of turning on the K-line is important. I always turn on the KAT500, then the KPA500 followed by the K3/P3. I have not had any issues doing things in that order. Maybe this is why you had the 'problem'? 73 Stephen G4SJP On 21 February 2014 10:19, ke9uw c-haw...@illinois.edu wrote: Oh yes, I remember now yesterday I got a soft fault on the KPA500. I turned on the K3, the KAT500 went to the pretuned setting on 40M and then I turned on the KPA500 and clicked it into operate. I said one word and the KPA500 went to standby. No red lights. I returned it to operate and everything worked well. Forgot about that...not a problem, but don't know why it did that. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-KPA500-KAT500-revs-4-83-1-38 -1-58-tp7584490p7584507.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58
All working smoothly except: On a couple occasions, after manually initiating a tune, the tune completed satisfactorily and then the KPA500 indicated a fault right at the end of the tune cycle. Pretty sure it was a soft fault but I habitually hit the button to clear it ... will observe more carefully if it happens again. 73, Carl WS7L __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html