[Elecraft] K3 Quick Split Operation?
I've been searching the archives and can't find any quick and easy way to UP 1 for Quick Split operation. The only way I see doing it is hitting the AB button, then hitting SPLIT, and dialing in the frequency 1 khz above the VFO A frequency into VFO B using the VFO B knob. Is there any easier way? My Icom 756 ProIII has a way to go UP 1 by holding the SPLIT button and then hitting 1 and hitting SPLIT again. Or hitting 2 to go up 2, etc. Maybe this is something that can be added in a future firmware release? Any info would be appreciated. Thanks. Mike AC6JA K3 #3215 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Quick Split Operation?
You can write a k3 macro for this. See the examples in K3Utility help. There are several examples there. Dick, K6KR Sent from my iPhone On Mar 21, 2010, at 10:48 AM, ac...@aol.com wrote: I've been searching the archives and can't find any quick and easy way to UP 1 for Quick Split operation. The only way I see doing it is hitting the AB button, then hitting SPLIT, and dialing in the frequency 1 khz above the VFO A frequency into VFO B using the VFO B knob. Is there any easier way? My Icom 756 ProIII has a way to go UP 1 by holding the SPLIT button and then hitting 1 and hitting SPLIT again. Or hitting 2 to go up 2, etc. Maybe this is something that can be added in a future firmware release? Any info would be appreciated. Thanks. Mike AC6JA K3 #3215 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Quick Split Operation?
You can do it with a macro. But with XIT available, why bother? Turn on XIT, dial up the split you want and there you are. If you want to listen to your TX freq, press RIT. You can set the display for continuous readout of the offset in the B location by tapping DISP and setting the B knob to display the position between the date and the voltage. You lose the fast/integer tuning capability of the offset knob by engaging this, however. --- On Sun, 3/21/10, ac...@aol.com ac...@aol.com wrote: From: ac...@aol.com ac...@aol.com Subject: [Elecraft] K3 Quick Split Operation? To: Elecraft@mailman.qth.net Date: Sunday, March 21, 2010, 11:48 AM I've been searching the archives and can't find any quick and easy way to UP 1 for Quick Split operation. The only way I see doing it is hitting the AB button, then hitting SPLIT, and dialing in the frequency 1 khz above the VFO A frequency into VFO B using the VFO B knob. Is there any easier way? My Icom 756 ProIII has a way to go UP 1 by holding the SPLIT button and then hitting 1 and hitting SPLIT again. Or hitting 2 to go up 2, etc. Maybe this is something that can be added in a future firmware release? Any info would be appreciated. Thanks. Mike AC6JA K3 #3215 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Quick Split Operation?
One of the Macros used as an example in the Programmers Reference does that for Up 2 : SWT13;SWT13;FT1;UPB5;RT0;XT0; You can modify that for Up 1: SWT13;SWT13;FT1;UPB4;RT0;XT0; I have them programmed on my PF1 and PF2 keys and use them all the time. Rick K6LE On 3/21/2010, at 10:48 , ac...@aol.com wrote: I've been searching the archives and can't find any quick and easy way to UP 1 for Quick Split operation. The only way I see doing it is hitting the AB button, then hitting SPLIT, and dialing in the frequency 1 khz above the VFO A frequency into VFO B using the VFO B knob. Is there any easier way? My Icom 756 ProIII has a way to go UP 1 by holding the SPLIT button and then hitting 1 and hitting SPLIT again. Or hitting 2 to go up 2, etc. Maybe this is something that can be added in a future firmware release? Any info would be appreciated. Thanks. Mike AC6JA K3 #3215 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html