Re: [Elecraft] One minor issue with the KPA500
Any progress in this area? I'm experiencing the same problem. KPA500 s/n 468 fw v1.11 with BAND CHG set to STBY K3 s/n 495 fw v4.42 with PWR SET set to PER BAND Works correctly when using band change up/down buttons on K3 but when using band change buttons on KPA500 the power setting for OPER remains in effect after the change - the STBY power setting is not recalled. Bob NW8L This _was_ fixed in the V1.11 firmware. I will be contacting you off-list to get more details to determine why it may not be working in your setup. Jack Brindle, W6FB Elecraft Engineering On Sep 25, 2011, at 11:01 AM, Richard Squire - HB9ANM wrote: On July 1, I wrote: When BAND CHG is set to STBY (which I prefer in order to avoid tuning my dipole on the new band with 400 W instead of 20 W by mistake!), the KPA500 does go into STBY when changing bands but the K3 keeps the lower power setting and does not return to 100 W. This does not happen if BAND CHG is set to NOR. This was supposed to be a timing problem to be resolved with the next FW release but FW 1.11 didn't solve it. Any one else noticed this? Not a big issue but I'd like to go for BAND CHG = STBY... Anyway, the KPA500 is joy to use. 73 - Richard - HB9ANM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] One minor issue with the KPA500
On July 1, I wrote: When BAND CHG is set to STBY (which I prefer in order to avoid tuning my dipole on the new band with 400 W instead of 20 W by mistake!), the KPA500 does go into STBY when changing bands but the K3 keeps the lower power setting and does not return to 100 W. This does not happen if BAND CHG is set to NOR. This was supposed to be a timing problem to be resolved with the next FW release but FW 1.11 didn't solve it. Any one else noticed this? Not a big issue but I'd like to go for BAND CHG = STBY... Anyway, the KPA500 is joy to use. 73 - Richard - HB9ANM -- View this message in context: http://elecraft.365791.n2.nabble.com/One-minor-issue-with-the-KPA500-tp6538841p6829648.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] One minor issue with the KPA500
Richard, Yes, I have noticed this also. I hope they can fix this. Dave, N4QS - Original Message - From: Richard Squire - HB9ANM hb9...@bluewin.ch To: elecraft@mailman.qth.net Sent: Sunday, September 25, 2011 1:01 PM Subject: Re: [Elecraft] One minor issue with the KPA500 On July 1, I wrote: When BAND CHG is set to STBY (which I prefer in order to avoid tuning my dipole on the new band with 400 W instead of 20 W by mistake!), the KPA500 does go into STBY when changing bands but the K3 keeps the lower power setting and does not return to 100 W. This does not happen if BAND CHG is set to NOR. This was supposed to be a timing problem to be resolved with the next FW release but FW 1.11 didn't solve it. Any one else noticed this? Not a big issue but I'd like to go for BAND CHG = STBY... Anyway, the KPA500 is joy to use. 73 - Richard - HB9ANM -- View this message in context: http://elecraft.365791.n2.nabble.com/One-minor-issue-with-the-KPA500-tp6538841p6829648.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] One minor issue with the KPA500
This _was_ fixed in the V1.11 firmware. I will be contacting you off-list to get more details to determine why it may not be working in your setup. Jack Brindle, W6FB Elecraft Engineering On Sep 25, 2011, at 11:01 AM, Richard Squire - HB9ANM wrote: On July 1, I wrote: When BAND CHG is set to STBY (which I prefer in order to avoid tuning my dipole on the new band with 400 W instead of 20 W by mistake!), the KPA500 does go into STBY when changing bands but the K3 keeps the lower power setting and does not return to 100 W. This does not happen if BAND CHG is set to NOR. This was supposed to be a timing problem to be resolved with the next FW release but FW 1.11 didn't solve it. Any one else noticed this? Not a big issue but I'd like to go for BAND CHG = STBY... Anyway, the KPA500 is joy to use. 73 - Richard - HB9ANM -- View this message in context: http://elecraft.365791.n2.nabble.com/One-minor-issue-with-the-KPA500-tp6538841p6829648.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] One minor issue with the KPA500
Thank you Dave and thank you Jack for your e-mail. Glad to know this minor problem is known and will be solved soon. I'm very happy with my KPA500-K S/N 107 which arrived on Monday and was ready for a smoke test in the (very) early hours on Tuesday morning, hi! All went smoothly as usual and the KPA500 is a joy to use. It's so well integrated with the K3, like having a 500W transceiver... I've had 2-3 other linears but you can't beat the KPA500. You can't beat the K3/KPA500 combination. And you can't beat Elecraft! Thanks! 73 Richard - Richard - HB9ANM -- View this message in context: http://elecraft.365791.n2.nabble.com/One-minor-issue-with-the-KPA500-tp6538841p6540499.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] One minor issue with the KPA500
My KPA500 is working like a champ with my K3 and AUX cable. But I noticed when BAND CHG is set to STBY (which I prefer in order to avoid tuning my dipole on the new band with 400 W instead of 20 W by mistake!), the KPA500 does go into STBY when changing bands but the K3 keeps the lower power setting and does not return to 100 W. This does not happen if BAND CHG is set to NOR. Anyone else noticed this? I guess that can be resolved in some future FW release 73 Richard - Richard - HB9ANM -- View this message in context: http://elecraft.365791.n2.nabble.com/One-minor-issue-with-the-KPA500-tp6538841p6538841.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] One minor issue with the KPA500
Richard, I noticed the same thing with my new KPA500. I searched the archives and found this note from Jack at Elecraft. Dave, N4QS This is a timing problem in the communications, and will be fixed in the next firmware release. Jack Brindle, W6FB Elecraft Engineering On Jun 7, 2011, at 10:05 AM, John K3TN wrote: If I hit the Oper/Stby buttons on the KPA500, the K3 displays a message and selects the proper power drive level. However, I've enabled BAND CHG to STBY, which switches the KPA500 to STBY whenever I change bands. It does that, but going to STANDBY by changing bands does NOT send the STBY message to the K3, so the K3 drive level stays at the OPER level, even though the KPA500 is in STBY. Shouldn't the KPA500 tell the K3 it has gone to standby via QSY? That would keep things in synch better. John K3TN - Original Message - From: Richard Squire - HB9ANM hb9...@bluewin.ch To: elecraft@mailman.qth.net Sent: Friday, July 01, 2011 2:05 PM Subject: [Elecraft] One minor issue with the KPA500 My KPA500 is working like a champ with my K3 and AUX cable. But I noticed when BAND CHG is set to STBY (which I prefer in order to avoid tuning my dipole on the new band with 400 W instead of 20 W by mistake!), the KPA500 does go into STBY when changing bands but the K3 keeps the lower power setting and does not return to 100 W. This does not happen if BAND CHG is set to NOR. Anyone else noticed this? I guess that can be resolved in some future FW release 73 Richard - Richard - HB9ANM -- View this message in context: http://elecraft.365791.n2.nabble.com/One-minor-issue-with-the-KPA500-tp6538841p6538841.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
