[Elecraft] Psk31 with K2
I would like suggestions on interfacing the K2 and suggestions... -- VE2ATD ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Psk31 with K2
Take a look at the Digital Interface box for the K2 on my website http://w3fpr.qrpradio.com and perhaps you can find some ideas. The interfacing is not hard as long as you don't want extra 'whiz-bang' features that are included with the commercial models. Also while at my website, take a look at the K2 Fixed Audio output. If you find that desirable, Tom Hammond has boards that will allow you to mount it between the front panel and the control board. See www.n0ss.net for more information on the fixed audio boards. With the fixed audio piped to a spare pin on your microphone jack and the interface box, you can have just one cable to the K2 microphone jack for all your soundcard generated data modes. 73, Don W3FPR Yves Dussault wrote: I would like suggestions on interfacing the K2 and suggestions... No virus found in this incoming message. Checked by AVG. Version: 8.0.100 / Virus Database: 269.24.3/1472 - Release Date: 5/29/2008 7:27 AM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Psk31 with K2
Yves Dussault wrote: I would like suggestions on interfacing the K2 and suggestions... If you like the simple approach: http://www.g4ilo.com/k2psk31.html - Julian, G4ILO K3 s/n: 222 K2 s/n: 392 G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf -- View this message in context: http://www.nabble.com/Psk31-with-K2-tp17543320p17544954.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] PSK31 on K2
Hi All Many thanks for all the replies . Think I have all the info needed now. That was quick !! 73 de Pete. G4GSA. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] PSK31 and K2
Ron Polityka wrote: Hello, I finally found my RIGblaster plus unit but I can't find my book. Just playing around with the RIGblaster I can receive via the sound card with out any problems. I placed the K2 into VOX and I go to transmit and all seems fine but it does not send anything. Then I tell the unit to receive but it will not receive unit I take the Mic jack out of the front of the K2. Anyone else using the K2 and RIGblaster plus for PSK31? Onto looking for the manual. 72 and Thanks, Ron Polityka WB3AAL www.wb3aal.com www.n3epa.org/ K1 - SN 01011 K2 - SN 01392 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com Hi Ron. I've got that same setup and it works great. Get to the West Mountain website and download a Rigblaster plus manual. You need that to double check the jumper settings inside the rigblaster and the cabling. If setup properly you don't need to use VOX to transmit as the rigblaster will kick over the PTT through the mic cable. Looking at the online Rigblaster plus manual and check page 8 for the Alinco, Kenwood, SGC, Elecraft jumper setup. Good luck. -- R. Kevin Stover ACØH K2/100 #4684 Reclaim Your Inbox! http://www.mozilla.org/products/thunderbird ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] PSK31 and K2
Hello, Thanks for the replies on the PSK31. I had the RIGblaster Plus running my K2 before I moved 4 years ago. I finally found the unit tucked away in a box that I thought had only manuals in it. Anyway, I got the RIGblaster Plus up and running with my K2 on PTT. I am using the DX4WIN 7.02.15 program and I had to figure out the different codes for the buffers. First QSO was with HP1 in Panama running the K2 @ 5 watts into a ground mounted Butternut HF9V with 120 radials on the ground. Once again, thanks for the help. 72 and Thanks, Ron Polityka WB3AAL www.wb3aal.com www.n3epa.org/ K1 - SN 01011 K2 - SN 01392 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] PSK31 and K2
Hello, I finally found my RIGblaster plus unit but I can't find my book. Just playing around with the RIGblaster I can receive via the sound card with out any problems. I placed the K2 into VOX and I go to transmit and all seems fine but it does not send anything. Then I tell the unit to receive but it will not receive unit I take the Mic jack out of the front of the K2. Anyone else using the K2 and RIGblaster plus for PSK31? Onto looking for the manual. 72 and Thanks, Ron Polityka WB3AAL www.wb3aal.com www.n3epa.org/ K1 - SN 01011 K2 - SN 01392 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com