Never mind...
Walked back through the setup and realized I hadn't set the installed SubRX
filters on all modes... just CW.
All seems fine with the SubRX now.
73 de Chuck, WS1L
On Sun, Feb 26, 2017 at 9:50 AM, Chuck Chandler
wrote:
> Well, the Sub receiver was installed this morning, filters and config
> seemed to complete without problem.
>
> However, the Sub-RX does not seem to be getting any signals. I see the
> Ant=Main when I use B-Set, so it should be sharing the main antenna.
>
> Any suggestions? Nothing pops out on the CONFIG list, and I had three TMP
> cables plugged into the SubRX module, there were only 3 jacks I saw. There
> were no unplugged ends inside the case. There was one leftover TMP
> cable... I thought it was for the 144 module I don't have. I may have to
> open it up and re-check all the TMP cables. Unless it's a simpler fix.
>
> 73 de Chuck, WS1L
>
> --
>
>
> ===
> Chuck Chandler
> chandler...@gmail.com
> ===
>
--
===
Chuck Chandler
chandler...@gmail.com
===
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com