RE : [Elecraft] OK Computer gurus, a little help
Hi, This is a computer software issue. Audio software normally have an option to listen what your record or monitor from de line-in of your sound card. But sometime, software do not offer it I have on my computer 2 softwares acting like a spectroscope One of them offer me to listen to the sound that come from the line-in with the line-out from my K2 And the other one do not offer me the same option -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de James T. Jim Rogers Envoyé : 27 juillet 2004 08:25 À : Elecraft Reflector Objet : [Elecraft] OK Computer gurus, a little help Is there a way to have the audio input (say K2 audio) to the sound card loop back to the output. In other words if I patch the audio from the K2 to the sound card input to use CWGet, I would like to use the audio output from the sound card to monitor the cw audio. The documentation on the sound card in my hp zu1175 seems a bit sketchy, and no doubt this may be something most people do not want to do. Hey if that isn't clear, give me a break, I am, after all, sound card challenged Thanks and 73, Jim W4ATK K2/100 4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE : [Elecraft] OK Computer gurus, a little help
In my copy of CWGet there's an option on the Setup menu called Sound Output. It's normally Off, but you can set it to various other options, which include an array of DSP filters. You might also need to fiddle with the mixer settings in case the relevant inputs or outputs are muted. 73, -- Julian, G4ILO. (RSGB, ARRL, G-QRP, K2 #392) G4ILO's Shack: http://www.qsl.net/g4ilo Jean-François Ménard [EMAIL PROTECTED] wrote: Hi, This is a computer software issue. Audio software normally have an option to listen what your record or monitor from de line-in of your sound card. But sometime, software do not offer it I have on my computer 2 softwares acting like a spectroscope One of them offer me to listen to the sound that come from the line-in with the line-out from my K2 And the other one do not offer me the same option ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] OK Computer gurus, a little help
Thanks guys, For all the input. I knew I could depend on you. It just seems my sound card setup on this laptop does not support that option. I built a little isolation unit to connect the rig and the pc/sound card and provided for an external speaker and a set of headphones. It is completely passive, but works quite well. I included a pot so I regulate the level to the sound card. 73s de W4ATK K2/100 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE : [Elecraft] OK Computer gurus, a little help
You did exactly what is to be the best for you -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de James T. Jim Rogers Envoyé : 27 juillet 2004 14:53 À : Elecraft Reflector Objet : RE: [Elecraft] OK Computer gurus, a little help Thanks guys, For all the input. I knew I could depend on you. It just seems my sound card setup on this laptop does not support that option. I built a little isolation unit to connect the rig and the pc/sound card and provided for an external speaker and a set of headphones. It is completely passive, but works quite well. I included a pot so I regulate the level to the sound card. 73s de W4ATK K2/100 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] OK Computer gurus, a little help
You can loop the audio back to the output in CWGet. Unfortunately, the time delay on my computer is significant. I was unable to send CW because of the delay. You need to split the audio before it goes into the computer. A simple y-connector works. Jeff Burns AD9T -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of James T. Jim Rogers Sent: Tuesday, July 27, 2004 7:25 AM To: Elecraft Reflector Subject: [Elecraft] OK Computer gurus, a little help Is there a way to have the audio input (say K2 audio) to the sound card loop back to the output. In other words if I patch the audio from the K2 to the sound card input to use CWGet, I would like to use the audio output from the sound card to monitor the cw audio. The documentation on the sound card in my hp zu1175 seems a bit sketchy, and no doubt this may be something most people do not want to do. Hey if that isn't clear, give me a break, I am, after all, sound card challenged Thanks and 73, Jim W4ATK K2/100 4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
