RE: Comb Generators for Site to Site Comparison / Correlations
Doug / et al Thanks to all that have responded. All of these inputs have been very helpful. Best regards, Mac _ From: Powell, Doug [mailto:doug.pow...@aei.com] Sent: Thursday, March 16, 2006 12:25 PM To: Elliott Mac-FME001; EMC-PSTC@listserv.ieee.org Subject: RE: Comb Generators for Site to Site Comparison / Correlations Elliot, We are using a Credence / Laplace generator with very good success. The particular mode we are using is the ERS EMC10.3G which is for 30MHz to 3GHz. It is extremely stable and I am certain their higher frequency products will be just as capable. They have a 250MHz to 26GHz product called a CGE02. http://credencetech.com/media/products/CGE02_Rev_2.pdf -Doug Doug Powell, Staff Engineer, CSA Category Liaison Corporate Compliance Dept. Advanced Energy Industries Inc. _ From: Elliott Mac-FME001 [mailto:fme...@motorola.com] Sent: Wednesday, March 15, 2006 2:27 PM To: EMC-PSTC@listserv.ieee.org Subject: Comb Generators for Site to Site Comparison / Correlations We are looking at high frequency comb generators [say 1- 18GHz] for comparing two EMC sites - a 5m semi-anechoic chamber and a 10m OATS. Has anyone out there had good luck with any specific one of the available options out there? Best regards, Mac - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
RE: Comb Generators for Site to Site Comparison / Correlations
This is a multi-part message in MIME format. Elliot, We are using a Credence / Laplace generator with very good success. The particular mode we are using is the ERS EMC10.3G which is for 30MHz to 3GHz. It is extremely stable and I am certain their higher frequency products will be just as capable. They have a 250MHz to 26GHz product called a CGE02. http://credencetech.com/media/products/CGE02_Rev_2.pdf -Doug Doug Powell, Staff Engineer, CSA Category Liaison Corporate Compliance Dept. Advanced Energy Industries Inc. _ From: Elliott Mac-FME001 [mailto:fme...@motorola.com] Sent: Wednesday, March 15, 2006 2:27 PM To: EMC-PSTC@listserv.ieee.org Subject: Comb Generators for Site to Site Comparison / Correlations We are looking at high frequency comb generators [say 1- 18GHz] for comparing two EMC sites - a 5m semi-anechoic chamber and a 10m OATS. Has anyone out there had good luck with any specific one of the available options out there? Best regards, Mac - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Elliot, We are using a Credence / Laplace generator with very good success. The particular mode we are using is the ERS EMC10.3G which is for 30MHz to 3GHz. It is extremely stable and I am certain their higher frequency products will be just as capable. They have a 250MHz to 26GHz product called a CGE02. http://credencetech.com/media/products/CGE02_Rev_2.pdf -Doug Doug Powell, Staff Engineer, CSA Category Liaison Corporate Compliance Dept. Advanced Energy Industries Inc. From: Elliott Mac-FME001 [mailto:fme...@motorola.com] Sent: Wednesday, March 15, 2006 2:27 PM To: EMC-PSTC@listserv.ieee.org Subject: Comb Generators for Site to Site Comparison / Correlations We are looking at high frequency comb generators [say 1- 18GHz] for comparing two EMC sites - a 5m semi-anechoic chamber and a 10m OATS. Has anyone out there had good luck with any specific one of the available options out there? Best regards, Mac - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald:emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ATT13080.txt Description: Binary data
RE: Comb Generators for Site to Site Comparison / Correlations
Mac, Check out the Com-Power CGO-5100. Best Regards, Mike Michael Heckrotte Engineering Manager, CCS (408) 463-0885 ext. 121 fax: (408) 463-0888 michael.heckro...@ccsemc.com From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of Elliott Mac-FME001 Sent: Wednesday, March 15, 2006 1:27 PM To: emc-p...@ieee.org Subject: Comb Generators for Site to Site Comparison / Correlations We are looking at high frequency comb generators [say 1- 18GHz] for comparing two EMC sites - a 5m semi-anechoic chamber and a 10m OATS. Has anyone out there had good luck with any specific one of the available options out there? Best regards, Mac - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
Comb Generators for Site to Site Comparison / Correlations
We are looking at high frequency comb generators [say 1- 18GHz] for comparing two EMC sites - a 5m semi-anechoic chamber and a 10m OATS. Has anyone out there had good luck with any specific one of the available options out there? Best regards, Mac - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
Comb Generators
Group, In your opinion, what is the best comb generator on the market? Why? Thanks Joe Martin --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: jim_bac...@mail.monarch.com Michael Garretson:pstc_ad...@garretson.org For policy questions, send mail to: Richard Nute: ri...@ieee.org
Re: COMB Generators
Item Subject: COMB Generators There are several manufacturers with Antenna Research Associates (ARA) being one of them. Theirs looks like a baby bicon with a calibrated output. Hans __ Reply Separator _ Subject: COMB Generators Author: Non-HP-r-flinders (r_flind...@emulex.com) at HP-ColSprings,shargw5 List-Post: emc-pstc@listserv.ieee.org Date:8/27/97 4:25 PM Hello All! I am hoping that someone can help me out here. We are looking for a site-reference COMB generator for site correlation and site performance verification. I have used these devices in the past and found that (at least the ones I used) they tend to provide unreliable output. I am looking to find a Calibrated source that provides emissions from 30 MHz to 5 or 10 GHz. The unit needs to be calibrated with reference to Frequency stability and Amplitude stability. Any information you can provide would be greatly appreciated. I will summarize and post the responses received. Thanks! Regards, Randy Flinders EMC Test Engineer Emulex Network Systems Corporation Phone: (714) 513-8012 Fax: (714) 513-8265 E-Mail: r_flind...@emulex.com WebSite: www.emulex.com * opinions expressed herein are personal, and in no way reflect the position of Emulex Corporation.
