[Emc-users] How can I install EMC on 10.04 for simulation only
I would like to debug my G codes while away from my Bridgeport Interact mill. To that end, I would like to use EMC as a G code previewer, without needing any realtime features, ppmc driver etc. How can I install it on an existing 10.04 computer? thanks i -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] How can I install EMC on 10.04 for simulation only
On Fri, 2010-08-06 at 11:28 -0500, Igor Chudov wrote: I would like to debug my G codes while away from my Bridgeport Interact mill. To that end, I would like to use EMC as a G code previewer, without needing any realtime features, ppmc driver etc. How can I install it on an existing 10.04 computer? thanks i This _might_ help (see section 2.6), but installing EMC2 on 10.4 is still experimental: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2 -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] How can I install EMC on 10.04 for simulation only
You install sim packages for emc2. There are 2.4 sim packages for Ubuntu 10.04 already built (only i386 so far). You can install them using this script: http://www.linuxcnc.org/lucid/emc2-install-sim.sh Regards, Alex On 8/6/2010 7:28 PM, Igor Chudov wrote: I would like to debug my G codes while away from my Bridgeport Interact mill. To that end, I would like to use EMC as a G code previewer, without needing any realtime features, ppmc driver etc. How can I install it on an existing 10.04 computer? thanks i -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] How can I install EMC on 10.04 for simulation only
On 08/06/2010 10:28 AM, Igor Chudov wrote: I would like to debug my G codes while away from my Bridgeport Interact mill. To that end, I would like to use EMC as a G code previewer, without needing any realtime features, ppmc driver etc. How can I install it on an existing 10.04 computer? The emc2-sim package should install on any lucid machine. I use it on my lucid laptop all the time to write gcode run it through Axis to see if it looks right. I just updated our wiki with instructions on how to install emc2-sim on lucid: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Ubuntu10.04PackageNotes Note that our official lucid sim packages at linuxcnc.org are currently only available in 32-bit. There are 64-bit lucid sim packages available from the buildbot: http://emc2-buildbot.colorado.edu/~buildmaster/ -- Sebastian Kuzminsky sky is black / stars show me the way moon whispers how to keep my faith -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] How can I install EMC on 10.04 for simulation only
thanks guys, I am running the script now. Been reading about G code on the plane. i On Fri, Aug 6, 2010 at 11:49 AM, Kirk Wallace kwall...@wallacecompany.com wrote: On Fri, 2010-08-06 at 11:28 -0500, Igor Chudov wrote: I would like to debug my G codes while away from my Bridgeport Interact mill. To that end, I would like to use EMC as a G code previewer, without needing any realtime features, ppmc driver etc. How can I install it on an existing 10.04 computer? thanks i This _might_ help (see section 2.6), but installing EMC2 on 10.4 is still experimental: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2 -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
