RE: upload timeout errors
We have tried uploads with Foxwatch logged in monitoring processor and RAM usage and we have tried it with API shutdown and traffic minimized as much as possible. Occassionally we may get one or two stations to upload but never a complete upload. We have 5 CP40 pairs (4 A's and 1 B), an AB Station and two Modbus modules. We have upgraded our RAM on our host AW to 256 MB and our hard drives to 9 GB based on Foxboro's recommendations, all to no avail. I assume Foxboro is still working on the problem. We haven't really heard from them since the hard drive upgrade a few weeks ago. Chad Airhart Senior Instrument, Electrical Control Systems Engineer Equistar Chemicals, LP. Victoria, TX Wk. (361) 572-2568 Pgr. (361) 270-2214 alpha messaging at [EMAIL PROTECTED] Fx. (361) 572-2541 -Original Message- From: Johnson, Alex (Foxboro) [SMTP:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 10:06 AM To: Foxboro DCS Mail List Subject: RE: upload timeout errors To be honest, I'm not sure. I know it varies with the Control Station type (CP-10/30/40/60, CmP-15/30, AW-I, microI/A, etc) If I was dealing with this issue, I would compare the performance across the stations while uploading and see if I could determine that. I also suspect that it is linked to the amount of broadcast traffic in the plant. This is harder to analyze without FoxWatch, but it should be examined. Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: Sascha Wildner [SMTP:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 9:26 AM To: Foxboro DCS Mail List Subject:AW: upload timeout errors Where's the critical range? Regards, Sascha -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Im Auftrag von Johnson, Alex (Foxboro) Gesendet: Montag, 24. September 2001 20:34 An: Foxboro DCS Mail List Betreff: RE: upload timeout errors It's always a good thing to check you system load before and during an upload. Look at the idle time and the free RAM. Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: Navarro, Douglas [SMTP:[EMAIL PROTECTED]] Sent: Monday, September 24, 2001 10:44 AM To: Foxboro Subject:upload timeout errors List members, We have been experiencing some problems with our I/A system when we try to upload from the CPs. These are the type of error message we get Object Mgr omread() timeout Error on parameter FKCP02_ECB:FK2B05.BADRNG --- UPLOAD ABORTED --- at compound/block FKCP02_ECB:FK2B05 Object Mgr omread() timeout Error on parameter SATEL1_STA:STATION.AUTCKP --- UPLOAD ABORTED --- at compound/block SATEL1_STA:STATION This error occurs almost all the time and with any parameter of any variable. I would appreciate if anybody has any insight into this kind of problem. Regards, Douglas Navarro PDVSA Tel. 58-269-2406955 Fax 58-269-2405240 email: [EMAIL PROTECTED] *** PDVSA´S INTERNET E-MAIL USE *** This message may contain information solely of the interest of PDVSA or its businesses. Copying, distribution, disclosure or any use of the information contained in this transmission is permitted only to authorized parties. If you have received this e-mail by error, please destroy it and notify [EMAIL PROTECTED] or the sender by reply email. ** USO DEL CORREO ELECTRONICO DE PDVSA HACIA INTERNET ** Esta nota puede contener informacion de interes solo para PDVSA o sus negocios. Solo esta permitida su copia, distribucion o uso a personas autorizadas. Si recibio esta nota por error, por favor destruyala y notifique al remitente o a [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list
RE: upload timeout errors
To be honest, I'm not sure. I know it varies with the Control Station type (CP-10/30/40/60, CmP-15/30, AW-I, microI/A, etc) If I was dealing with this issue, I would compare the performance across the stations while uploading and see if I could determine that. I also suspect that it is linked to the amount of broadcast traffic in the plant. This is harder to analyze without FoxWatch, but it should be examined. Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: Sascha Wildner [SMTP:[EMAIL PROTECTED]] Sent: Tuesday, September 25, 2001 9:26 AM To: Foxboro DCS Mail List Subject:AW: upload timeout errors Where's the critical range? Regards, Sascha -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Im Auftrag von Johnson, Alex (Foxboro) Gesendet: Montag, 24. September 2001 20:34 An: Foxboro DCS Mail List Betreff: RE: upload timeout errors It's always a good thing to check you system load before and during an upload. Look at the idle time and the free RAM. Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: Navarro, Douglas [SMTP:[EMAIL PROTECTED]] Sent: Monday, September 24, 2001 10:44 AM To: Foxboro Subject:upload timeout errors List members, We have been experiencing some problems with our I/A system when we try to upload from the CPs. These are the type of error message we get Object Mgr omread() timeout Error on parameter FKCP02_ECB:FK2B05.BADRNG --- UPLOAD ABORTED --- at compound/block FKCP02_ECB:FK2B05 Object Mgr omread() timeout Error on parameter SATEL1_STA:STATION.AUTCKP --- UPLOAD ABORTED --- at compound/block SATEL1_STA:STATION This error occurs almost all the time and with any parameter of any variable. I would appreciate if anybody has any insight into this kind of problem. Regards, Douglas Navarro PDVSA Tel. 58-269-2406955 Fax 58-269-2405240 email: [EMAIL PROTECTED] *** PDVSA´S INTERNET E-MAIL USE *** This message may contain information solely of the interest of PDVSA or its businesses. Copying, distribution, disclosure or any use of the information contained in this transmission is permitted only to authorized parties. If you have received this e-mail by error, please destroy it and notify [EMAIL PROTECTED] or the sender by reply email. ** USO DEL CORREO ELECTRONICO DE PDVSA HACIA INTERNET ** Esta nota puede contener informacion de interes solo para PDVSA o sus negocios. Solo esta permitida su copia, distribucion o uso a personas autorizadas. Si recibio esta nota por error, por favor destruyala y notifique al remitente o a [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list
RE: upload timeout errors
It's always a good thing to check you system load before and during an upload. Look at the idle time and the free RAM. Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: Navarro, Douglas [SMTP:[EMAIL PROTECTED]] Sent: Monday, September 24, 2001 10:44 AM To: Foxboro Subject:upload timeout errors List members, We have been experiencing some problems with our I/A system when we try to upload from the CPs. These are the type of error message we get Object Mgr omread() timeout Error on parameter FKCP02_ECB:FK2B05.BADRNG --- UPLOAD ABORTED --- at compound/block FKCP02_ECB:FK2B05 Object Mgr omread() timeout Error on parameter SATEL1_STA:STATION.AUTCKP --- UPLOAD ABORTED --- at compound/block SATEL1_STA:STATION This error occurs almost all the time and with any parameter of any variable. I would appreciate if anybody has any insight into this kind of problem. Regards, Douglas Navarro PDVSA Tel. 58-269-2406955 Fax 58-269-2405240 email: [EMAIL PROTECTED] *** PDVSA´S INTERNET E-MAIL USE *** This message may contain information solely of the interest of PDVSA or its businesses. Copying, distribution, disclosure or any use of the information contained in this transmission is permitted only to authorized parties. If you have received this e-mail by error, please destroy it and notify [EMAIL PROTECTED] or the sender by reply email. ** USO DEL CORREO ELECTRONICO DE PDVSA HACIA INTERNET ** Esta nota puede contener informacion de interes solo para PDVSA o sus negocios. Solo esta permitida su copia, distribucion o uso a personas autorizadas. Si recibio esta nota por error, por favor destruyala y notifique al remitente o a [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
RE: upload timeout errors
We have had this same problem for over 2 years now. Various field service people and TAC have looked at it and been unable to determine the root of the problem. We have upgraded our RAM, upgraded our hard drives all to no avail. So far Foxboro has been little to no help in resolving the problem. It has been extremely frustrating. Chad Airhart Senior Instrument, Electrical Control Systems Engineer Equistar Chemicals, LP. Victoria, TX Wk. (361) 572-2568 Pgr. (361) 270-2214 alpha messaging at [EMAIL PROTECTED] Fx. (361) 572-2541 -Original Message- From: Navarro, Douglas [SMTP:[EMAIL PROTECTED]] Sent: Monday, September 24, 2001 10:44 AM To: Foxboro Subject: upload timeout errors List members, We have been experiencing some problems with our I/A system when we try to upload from the CPs. These are the type of error message we get Object Mgr omread() timeout Error on parameter FKCP02_ECB:FK2B05.BADRNG --- UPLOAD ABORTED --- at compound/block FKCP02_ECB:FK2B05 Object Mgr omread() timeout Error on parameter SATEL1_STA:STATION.AUTCKP --- UPLOAD ABORTED --- at compound/block SATEL1_STA:STATION This error occurs almost all the time and with any parameter of any variable. I would appreciate if anybody has any insight into this kind of problem. Regards, Douglas Navarro PDVSA Tel. 58-269-2406955 Fax 58-269-2405240 email: [EMAIL PROTECTED] *** PDVSA´S INTERNET E-MAIL USE *** This message may contain information solely of the interest of PDVSA or its businesses. Copying, distribution, disclosure or any use of the information contained in this transmission is permitted only to authorized parties. If you have received this e-mail by error, please destroy it and notify [EMAIL PROTECTED] or the sender by reply email. ** USO DEL CORREO ELECTRONICO DE PDVSA HACIA INTERNET ** Esta nota puede contener informacion de interes solo para PDVSA o sus negocios. Solo esta permitida su copia, distribucion o uso a personas autorizadas. Si recibio esta nota por error, por favor destruyala y notifique al remitente o a [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
