Re: enable linux compatibility
have you tried running any Linux binaries? Have you installed any of the linux_base emulator ports? Try downloading a linux binary or installing a linux based application from ports.. if you do not get any elf binary errors then yo umost likely have the linux compatibility enabled correctly. The only other thing to watch for are any programs that might require linprocfs Hope this helps.. T - Original Message - From: saravanan ganapathy [EMAIL PROTECTED] To: freebsd-questions@freebsd.org Sent: Friday, January 28, 2005 9:34 PM Subject: Re: enable linux compatibility --- Lowell Gilbert [EMAIL PROTECTED] wrote: saravanan ganapathy [EMAIL PROTECTED] writes: Hai I tried to enable linux compatibility on my freebsd (5.3 Release)kernel by adding 'options COMPAT_LINUX' in my kernel config file and recompiled the kernel using this file.But even after, this is not enabled. kldstat o/p shows as # kldstat Id Refs AddressSize Name 13 0xc040 5ef620 kernel 2 14 0xc09f 537f0acpi.ko Right. You installed it directly into your kernel, instead of as a kernel module. Therefore, it does not show up in a list of kernel modules. The 'linux' command also not found. Not needed. What may be the problem? You haven't tried anything that *uses* the linux compatibility. What do you want it for? How do I confirm that linux compatibility has been enabled? Sarav __ Do you Yahoo!? The all-new My Yahoo! - Get yours free! http://my.yahoo.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: starting mt-daapd
Heres a good example mt-daapd config file.. try using something similar to this.. and make sure your editor isnt leaving garbage characters in the file: ## web_root/path/to/mt-daapd/admin-root port3689 admin_pwpassword db_dir /var/cache/mt-daapd mp3_dir /path/to/music servername Music runas nobody playlist/etc/mt-daapd.playlist extensions .mp3,.m4a,.m4p logfile /var/log/mt-daapd.log rescan_interval 300 process_m3u 1 scan_type 0 compress 1 - Original Message - From: Alan Curtis [EMAIL PROTECTED] To: freebsd-questions@freebsd.org Sent: Friday, January 28, 2005 7:00 PM Subject: starting mt-daapd I installed mt-daapd and used the default config file in but when I try to start it using /usr/local/etc/rc.d/mt-daapd.sh start I get the following message Invalid config directive: Error reading config file (/usr/local/etc/mt-daapd.conf) I deleted all the empty lines and now get the message 2005-01-29 02:53:24: Starting rendezvous daemon 2005-01-29 02:53:24: Starting signal handler 2005-01-29 02:53:24: Loading playlists 2005-01-29 02:53:24: Initializing database 2005-01-29 02:53:24: Starting mp3 scan 2005-01-29 02:53:24: Starting web server from /usr/local/share/mt-daapd/admin-root on port 3689 2005-01-29 02:53:24: Rendezvous pipe closed... Exiting 2005-01-29 02:53:24: Aborting in the log file. How do I get this thing running? Alan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
make buildworld error
... cd /usr/src/etc; make buildincludes; make installincludes === etc/sendmail === etc/sendmail -- stage 4.2: building libraries -- cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj MACHINE_ARCH=amd64 MACHINE=amd64 CPUTYPE=amd64 GROFF_BIN_PATH=/usr/obj/usr/src/amd64/legacy/usr/bin GROFF_FONT_PATH=/usr/obj/usr/src/amd64/legacy/usr/share/groff_font GROFF_TMAC_PATH=/usr/obj/usr/src/amd64/legacy/usr/share/tmac _SHLIBDIRPREFIX=/usr/obj/usr/src/amd64 INSTALL=sh /usr/src/tools/install.sh PATH=/usr/obj/usr/src/amd64/legacy/usr/sbin:/usr/obj/usr/src/amd64/legacy/usr/bin:/usr/obj/usr/src/amd64/legacy/usr/games:/usr/obj/usr/src/amd64/usr/sbin:/usr/obj/usr/src/amd64/usr/bin:/usr/obj/usr/src/amd64/usr/games:/sbin:/bin:/usr/sbin:/usr/bin make -f Makefile.inc1 DESTDIR=/usr/obj/usr/src/amd64 -DNOFSCHG -DNOHTML -DNOINFO -DNOLINT -DNOMAN -DNOPROFILE libraries cd /usr/src; make -f Makefile.inc1 _startup_libs; make -f Makefile.inc1 _prebuild_libs; make -f Makefile.inc1 _generic_libs; === gnu/lib/csu make -f /usr/src/gnu/lib/csu/../../usr.bin/cc/cc_tools/Makefile MFILE=/usr/src/gnu/lib/csu/../../usr.bin/cc/cc_tools/Makefile GCCDIR=/usr/src/gnu/lib/csu/../../../contrib/gcc tconfig.h echo '#ifndef GCC_TCONFIG_H' tconfig.h echo '#define GCC_TCONFIG_H' tconfig.h echo '#ifdef IN_GCC' tconfig.h echo '# include ansidecl.h'tconfig.h echo '#endif'tconfig.h echo '#define USED_FOR_TARGET' tconfig.h echo '#endif /* GCC_TCONFIG_H */'tconfig.h make -f /usr/src/gnu/lib/csu/../../usr.bin/cc/cc_tools/Makefile MFILE=/usr/src/gnu/lib/csu/../../usr.bin/cc/cc_tools/Makefile GCCDIR=/usr/src/gnu/lib/csu/../../../contrib/gcc tm.h echo '#ifndef GCC_TM_H' tm.h echo '#define GCC_TM_H' tm.h echo '#ifdef IN_GCC' tm.h echo '#include i386/biarch64.h'tm.h echo '#include i386/i386.h'tm.h echo '#include i386/unix.h'tm.h echo '#include i386/att.h' tm.h echo '#include dbxelf.h' tm.h echo '#include elfos.h'tm.h echo '#include freebsd-native.h' tm.h echo '#include freebsd-spec.h' tm.h echo '#include freebsd.h' tm.h echo '#include i386/freebsd.h' tm.h echo '#include i386/x86-64.h' tm.h echo '#include i386/freebsd64.h' tm.h echo '#include freebsd64-fix.h'tm.h echo '#include defaults.h' tm.h echo '#if !defined GENERATOR_FILE !defined USED_FOR_TARGET' tm.h echo '# include insn-constants.h' tm.h echo '# include insn-flags.h' tm.h echo '#endif'tm.h echo '#endif'tm.h echo '#define EXTRA_MODES_FILE i386/i386-modes.def' tm.h echo '#endif /* GCC_TM_H */' tm.h rm -f .depend mkdep -f .depend -a -DCRT_BEGIN -DIN_GCC -DHAVE_LD_EH_FRAME_HDR -I/usr/src/gnu/lib/csu/../../../contrib/gcc/config -I/usr/src/gnu/lib/csu/../../../contrib/gcc -I. -I/usr/src/gnu/lib/csu/../../usr.bin/cc/cc_tools /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c cc -O -pipe -march=amd64 -DIN_GCC -DHAVE_LD_EH_FRAME_HDR -finhibit-size-directive -fno-inline-functions -fno-exceptions -fno-zero-initialized-in-bss -fno-omit-frame-pointer -fno-unit-at-a-time -I/usr/src/gnu/lib/csu/../../../contrib/gcc/config -I/usr/src/gnu/lib/csu/../../../contrib/gcc -I. -I/usr/src/gnu/lib/csu/../../usr.bin/cc/cc_tools -g0 -DCRT_BEGIN -c -o crtbegin.o /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c:1: error: bad value (amd64) for -march= switch /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c:1: error: bad value (amd64) for -mtune= switch *** Error code 1 Stop in /usr/src/gnu/lib/csu. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. 7rxI# how do i fix this ? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Basic Info on Wireless Router Installation and Performance
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Bob Perry Sent: Friday, January 28, 2005 11:33 PM To: Ted Mittelstaedt Cc: freebsd-questions@freebsd.org Subject: Re: Basic Info on Wireless Router Installation and Performance Ted, What linebacker did you have in mind? Bob, who is your telephone company? Ted ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Missing INDEX file in Ports.
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Julien Gabel Sent: Friday, January 28, 2005 1:39 AM To: freebsd-questions@freebsd.org Subject: Re: Missing INDEX file in Ports. Your missing the point. INDEX is supposed to be in the RELEASES on the CDROMs because the CD's are supposed to be self-contained, ie: you should not require an Internet connection to get a complete install. Otherwise there's no point in even bothering to release the CDROMS in the first place. Yeah, I totally agree, INDEX should be included in ports.tar.gz for at least RELEASES. Included or not, the release is self contained (and don't require an internet in that case) since the INDEX or INDEX-5 file can always be generated from the local ports tree, via : # cd /usr/ports; make index So can many of the utilities - like perl and X - that are now supplied as binaries. I guess you want to go back to the 386BSD days when you had to build all those things yourself. I think you deserve to have your FreeBSD taken away for a month and be forced to run Solaris 2.5.1. That will teach you to smart off about being able to generate things. How would you like a Sendmail upgrade to take 2 hours, eh? Or let's see even better - how about bootstrapping a usable version of gcc on a SunOS box? Been there, done that. We don't want to go back to those days. There's a reason that precompiled and pregenerated stuff is included in the UNIX distributions. Neither Disk 1's require KDE or GNOME to be generated from the sources, either. Ted ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Switching Tomcat 4 to Tomcat 5
On Sat, 29 Jan 2005 10:34:10 +0100, Java News [EMAIL PROTECTED] wrote: Hi, Some ports as eg. jetspeed or axis requires Tomcat 4 to install, I have already installed Tomcat but 5.0 version. So when I make a port install of eg. axis this port also installs Tomcat 4.1, which I don't want on my system. What can I do to prevent of installing such dependency and use Tomcat 5 instead? Best regards, Lee ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-java To unsubscribe, send any mail to [EMAIL PROTECTED] did you try to edit the make.conf WITH_TOMCAT_VER=5 i dont know what you have to write excatly for tomcat do ? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Missing INDEX file in Ports
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Kris Kennaway Sent: Friday, January 28, 2005 8:51 AM To: Ted Mittelstaedt Cc: freebsd-questions@freebsd.org; Michael C. Shultz Subject: Re: Missing INDEX file in Ports On Fri, Jan 28, 2005 at 03:34:46AM -0800, Ted Mittelstaedt wrote: INDEX has been included with every CDROM pressing of FreeBSD 4.x previously. And this will be the last 4.X pressing. So, it must have required a really severe space crunch to justify this significant of a deviation. It was probably just forgotten. Talk to the release engineers. Yes, that is my feeling as well. Glad to see your not using some silly justification to explain that it was deliberately left out. :-) My intent on the initial post was to find out if others were seeing the same thing. Since they are, it's time to e-mail the release people. Unfortunately, though, from the looks of the docs coming out of them, there's little interest in the release team on the 4.xx line anymore so this is probably an exercise in futility. Unfortunately the disappointing thing is that the 3.X release had the same kind of thing happen. The very last 3.X release of FreeBSD had several broken things - notably ESDI support, bad144 no longer worked, even when a few revs earlier it was working fine. Now we are seeing the same thing with 4.11 - a niggly problem that marrs the normally perfect release. I am concerned that if something like INDEX was forgotten, that there's going to be other things forgotten as well. Sigh. We really must learn when to quit on these release trains. 4.10 was a perfect cap on a successful 4.x run. Ted ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: enable linux compatibility
On 29 Jan Thomas Foster wrote: Try downloading a linux binary or installing a linux based application from ports.. if you do not get any elf binary errors then yo umost likely have the linux compatibility enabled correctly. The only other thing to watch for are any programs that might require linprocfs My FreeBSD-4.11R system gives me on portupgrade linux_base an upgrade to some RH-7.3 linux release. Lots of other ports seem to relate to linux_base-8. If I deinstall linux_base, WHAT other port package do I really need (want). There is lots of them nowadays (redhat, debian, suse; I lost track..) -- dick -- http://nagual.st/ -- PGP/GnuPG key: F86289CE ++ Running FreeBSD 4.11 ++ FreeBSD 5.3 + Nai tiruvantel ar vayuvantel i Valar tielyanna nu vilja ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
realplayer-10 on my FBSD-4.10
A few days ago I got help from this list in getting an update of realplayer-10 working on my laptop. The laptop has v5.3. Here I'm still using 4.10 and have run into new problems. realplayer-8 worked fine, BTW. When I type %realplay, after a few seconds the following is printed to stdout: No fonts found; this probably means that the fontconfig library is not correctly configured. You may need to edit the fonts.conf configuration file. More information about fontconfig can be found in the fontconfig(3) manual page and on http://fontconfig.org I poked around, finally found that both fontconfig and linux-fontconfig were installed. I found fonts.conf in /usr/X11R6/etc/fonts but don't understand what needs to be configured. Anybody else know what I'm doing wrong? (/etc/libmap.conf looks okay, I have linux_base 8 and the linuxpluginwrapper installed. I'm stumped. thanks for any light! gary -- Gary Kline [EMAIL PROTECTED] www.thought.org Public service Unix ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: ISDN connection problems
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Stefan Pietsch Sent: Friday, January 28, 2005 6:25 AM To: freebsd-questions@freebsd.org Subject: Re: ISDN connection problems Ted Mittelstaedt wrote: The problem may very well not be the 3com card. But unless you try swapping with a different ethernet card, you aren't going to have proof that it isn't - unless you stumble across the solution before you get desperate enough to actually try swapping the card. But, since you want to gamble on doing that, good luck to you. I replaced the 3com card with an Intel 82559 Pro/100, but it made no change. So I think I will step back to 4.11R, maybe it solves the problem ... If it doesen't then your probably going to need to try another ISDN card. By the way, have you by chance priced out ISDN routers lately? For example: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemcategory=73321item=5746457 512rd=1ssPageName=WDVW Cisco 1603's are going for under $20USD. The 1603 is the Euro version of Cisco's ISDN router and understands the Euro ISDN switches (in contrast to the 1604 which doesen't have an ST interface and only understands American ISDN switches) At the ISP I work at we still do a lot of dialup ISDN because we are the only ISP left in town that will guarentee multilinking. During the last year I've pretty much told all customers that we are only supporting the Cisco 1604 anymore, simply because the things are so darn cheap now that it's less of an annoyance factor to me to deal with more than one kind of router. (Despite the fact that I've configured more than a dozen different brands of ISDN routers during the heyday of ISDN) Ted ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
I only want stable software
I used CVSUP to keep my system up to date. How do I know that it's not installing unstable software? I want to keep my software stable, but not in the version branching sense. I just don't want it crashing my server at all. Is there any way to ensure that I only install high quality stable software? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I only want stable software
Pat Maddox wrote: I used CVSUP to keep my system up to date. How do I know that it's not installing unstable software? I want to keep my software stable, but not in the version branching sense. I just don't want it crashing my server at all. Is there any way to ensure that I only install high quality stable software? You should use RELENG_4_11 or RELENG_5_3 tags to have cvsup download security patches only. It's probably the most reliable way to keep your system as stable as it gets. Just use the following line in your cvsup supfile: src-all tag=RELENG_5_3 You could use tag=. for doc-all, and you should use it for ports-all. Best wishes, Andrew P. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Seeking performance tuning pointers/tracking down GIANT
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I read man tuning and did some goggling. Yet questions remain. System: Dual processor Intel PentiumPro motherboard. FreeBSD 5.3 SMP kernel. fxp 100baseT NIC. I am managing a system that is running tor, a fairly network intensive service. See http://tor.eff.org The service processes about 7Mbps symmetric traffic sustained. top shows about 33% CPU idle. There is plenty of inactive/free RAM. While server throughput grew steadily over time, throughput appears to have hit a ceiling at between 7 and 8 Mbps. The bottleneck is not upstream from the server. I am trying to track down the bottleneck inside the server that is establishing this ceiling. I played around with various sysctl variables, but to no effect. One thing that I do notice is that the main tor process tends to spend a fair amount of time in GIANT. Does perhaps one of the readers of this list have any suggestions how to determine where the bottleneck may be found and if so how to remove it? Thanks, - --Luck Content-Type: text/plain This email was not PGP encrypted. My next email to you could be PGP encrypted, if you click on to the URL below: https://keys.cypherpunks.to/b/b.e?r=freebsd-questions%40freebsd.comn=hFP433Ce%2FD7ivfZPVmDksg%3D%3D -BEGIN PGP SIGNATURE- Version: 1537 iQIVAwUBQftodwRVjUj9NCi0AQIj1RAAwhWTaeGc/XBossmqvfyWac3LqEDqJF3r MhC660n+ixh5Bc4ajOuOY4402YSLhdzkMY9dU5rJvONW3LnXikDQiPE40QCCaxNn euwKIVMI7E+IeqCn2cx+br7ZQEkEF6JT4kJXmvi142TWNrKyuV/2GDky3I4hj068 la+8J+Xp6toOB5FemlUs7oMApZkcqnA1ixNO/nrNXoke2NaZu+sxjWTelVOv5r8T ewuOgUL+uWvJ+cyGR6heXgsgynVoeVBm+rkv7LrEGS9WJPQJI72u46pYFFlQfDFz X96qiJALHTky8ey/+e/jB2+LUoq3e3UsxKPN+dJ7JuddasvkfciOJ4/ry6se1/Jv 0YQQeNu7Z7c2qomk7SOs66AQYlCiwXJc3AfQl7wKTYSTwaXSNBkbeq6j8+gTeWQx p5JZmu4cmkK5YN4wMxpWhNAdcUryHlCCpVNj6cPjPNqnQsdXfIhpT9qlnS4OjcPd ne8ZbD3e+uEyvoQJHwo+XQ8UNkYww31U95aOlNcirVgGhe7vtKxULp2tHMebk271 Ift0KGTWAnJBIO0EFfonekzLaTiEparv32rgFHI//hMksdkfv9qRNYaMYFcOgvqg 96dWZ0czd6MeQaLzRU8642keDHXiq5znXnOcUyNhRt45C30cFrKm0mgu0fqq3SV8 QIsAS69/Sbg= =I6BX -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Free BSD 5.3 SMP Kernel
Hi, I am new to Free BSD ( and Linux) and have just setup a rather old Proliant 5000 as a test machine. It has Quad PII processors and I would like to make use of them. The Install CDs only come with the 'Standard' kernel. Looking through the handbook implies that support for multiple processors in 5.3 was removed due to problems. I have seen references to a 5.3 SMP kernal though, is it possible to get hold of this, or do I have to wait for 5.4 to be released? If so when is this likely to be released. Sorry if this is a simple question. Thanks Rob ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cyrus-imapd22 installation problem
Hello I have been trying to install the cyrus-imapd22 port without but I keep receiving the same error. /usr/bin/install -c -o root -g wheel -s -m 755 notifyd /usr/local/cyrus/bin /usr/local/lib/perl5/5.8.2/man/man3/Cyrus::IMAP.3: No such file or directory *** Error code 1 I have searched the port check all of the ports dependencies but I do can not find which port installs Cyrus::IMAP. I believe I have all the dependencies installed. I have only seen one other person with this problem so I believe I am doing something wrong. I am not sure what. Aaron OpenSP-1.5_5 needs updating (port has 1.5_6) apache-2.0.49 needs updating (port has 2.0.52_4) aspell-0.50.5 needs updating (port has 0.60.2) autoconf-2.13.000227_5 = up-to-date with port autoconf-2.53_1 needs updating (port has 2.53_3) autoconf-2.53_3 = up-to-date with port autoconf-2.57_1 ? error - origin not found autoconf-2.59_2 = up-to-date with port automake-1.4.6_1= up-to-date with port automake-1.5_2,1= up-to-date with port automake-1.7.5_1? error - origin not found bison-1.75_2= up-to-date with port cclient-2002d,1 needs updating (port has 2004a,1) cups-base-1.1.20.0needs updating (port has 1.1.22.0_2) cvsnt-2.0.34 needs updating (port has 2.0.58d_1) cvsup-16.1_3 needs updating (port has 16.1h) cyrus-sasl-2.1.20_1 = up-to-date with port cyrus-sasl-saslauthd-2.1.20_1 = up-to-date with port db4-4.0.14_1,1 = up-to-date with port db42-4.2.52_3 = up-to-date with port docbook-sk-4.1.2_3 = up-to-date with port docbook-xml-4.2_1 = up-to-date with port % I think it will search the Cyrus::IMAP.3 in the wrong place. You've installed perl version 5.8.5, not 5.8.2 as you can see in the error message. /usr/local/lib/perl5/5.8.2/man/man3/Cyrus::IMAP.3 Maybe you didn't executed use.perl port after the latest installation of perl. Hopefully, i've send you in the right direction. Serge Kestens ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Free BSD 5.3 SMP Kernel
I'm just guessing, but it sounds like you come from a Linux background. What you want to do is roll your own kernel by copying the /usr/src/sys/i386/conf/GENERIC file to /usr/src/sys/i386/conf/MYSYSTEMNAME Upper case system names are traditionally used for the kernel config file in unix. HP-UX is the same, IIRC. Edit in: quote # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel device apic# I/O APIC /quote You will also want to change things like ident to MYSYSTEMNAME. There are a plethora of other options to have a play with as well. after you've finished editing go to /usr/src and run make buildkernel KERNCONF=MYSYSTEMNAME then make installkernel KERNCONF=MYSYSTEMNAME then reboot. http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html will help you tremendously. Personally I find the whole process much simpler than configuring a Linux kernel. Regards, Jon On Sat, 2005-01-29 at 11:12 +, Robert Slade wrote: Hi, I am new to Free BSD ( and Linux) and have just setup a rather old Proliant 5000 as a test machine. It has Quad PII processors and I would like to make use of them. The Install CDs only come with the 'Standard' kernel. Looking through the handbook implies that support for multiple processors in 5.3 was removed due to problems. I have seen references to a 5.3 SMP kernal though, is it possible to get hold of this, or do I have to wait for 5.4 to be released? If so when is this likely to be released. Sorry if this is a simple question. Thanks Rob ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- --- Achean Ltdhttp://www.achean.com Jon Mercer [EMAIL PROTECTED] Director --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Free BSD 5.3 SMP Kernel
On Sat, 29 Jan 2005 11:12:57 +, Robert Slade wrote Hi, I am new to Free BSD ( and Linux) and have just setup a rather old Proliant 5000 as a test machine. It has Quad PII processors and I would like to make use of them. The Install CDs only come with the 'Standard' kernel. Looking through the handbook implies that support for multiple processors in 5.3 was removed due to problems. I have seen references to a 5.3 SMP kernal though, is it possible to get hold of this, or do I have to wait for 5.4 to be released? If so when is this likely to be released. Sorry if this is a simple question. You'll have to recompile the kernel with SMP support. If you don't want to compile your own kernel, you can use SMP, located in /usr/src/sys/i386/conf. If you don't have that, you don't have your kernel sources installed. See http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/current-stable. html for more information. Do read every page of that chapter. Jorn Thanks Rob ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: make buildworld error
On Saturday 29 January 2005 02:56 am, Gert Cuykens wrote: ... cd /usr/src/etc; make buildincludes; make installincludes === etc/sendmail === etc/sendmail -- stage 4.2: building libraries -- cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj MACHINE_ARCH=amd64 MACHINE=amd64 CPUTYPE=amd64 snip -I/usr/src/gnu/lib/csu/../../../contrib/gcc -I. -I/usr/src/gnu/lib/csu/../../usr.bin/cc/cc_tools -g0 -DCRT_BEGIN -c -o crtbegin.o /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c:1: error: bad value (amd64) for -march= switch /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c:1: error: bad value (amd64) for -mtune= switch *** Error code 1 Stop in /usr/src/gnu/lib/csu. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. 7rxI# how do i fix this ? ___ Gert What do you have in your /usr/src/sys/amd64/conf/config file, show me about the first 30 lines of it. show me your /etc/make.conf file. Don -- Donald J. O'Neill [EMAIL PROTECTED] I'm not totally useless, I can be used as a bad example. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
having 1.5GB RAM I cannot allocate more than 512MB RAM in 4.10
Dear FreeBSD list, I have an AMD Athlon-XP with 1.5GB RAM. Unfortunately my FreeBSD 4.10 throws a memory allocation error when in a simple C++ program I try to allocate with new 512MB of RAM or more. Until 511MB it goes fine! Is there any kernel specific feature I should tweak? What is the problem here? I didn't have such problems with 5.3 Release although it is generally more unstable! Here is the simple C++ program I used: -- #include iostream using namespace std; int main(int argc, char* argv[]) { if (argc != 2) { cout usage: argv[0] mem(memory to allocate in bytes)\n; cout examp: argv[0] 1024\n; exit(1); } long int bytes = strtol(argv[1], NULL, 0); char* buffer = new char[bytes]; cout memory allooated succesfully = bytes/1024.0/1024.0 MB \n; delete[] buffer; cout allocated memory is now free\n; return 0; } #g++ memalloc -o run #./run 536870912 which when I tried to run gave a: - terminate called after throwing an instance of 'std::bad_alloc' what(): St9bad_alloc Abort (core dumped) Here is the output of my top command: last pid: 432; load averages: 0.00, 0.00, 0.00 up 0+00:35:2313:37:10 38 processes: 1 running, 37 sleeping Mem: 63M Active, 39M Inact, 55M Wired, 24K Cache, 50M Buf, 1343M Free Swap: 3056M Total, 3056M Free PID USERNAME PRI NICE SIZERES STATETIME WCPUCPU COMMAND 183 root 2 0 84824K 19864K select 0:05 0.00% 0.00% XFree86 190 root 2 0 8916K 7720K poll 0:02 0.00% 0.00% gconfd-2 360 root 2 0 10620K 9720K select 0:02 0.00% 0.00% emacs 242 root 2 0 12464K 9124K poll 0:02 0.00% 0.00% metacity 248 root 2 0 21148K 15472K poll 0:01 0.00% 0.00% nautilus 246 root 2 0 17032K 13108K poll 0:01 0.00% 0.00% gnome-panel 264 root 2 0 16104K 12124K poll 0:01 0.00% 0.00% wnck-applet 266 root 2 0 14148K 9560K poll 0:01 0.00% 0.00% mixer_applet2 188 root 2 0 16124K 10760K poll 0:01 0.00% 0.00% gnome-session 197 root 2 0 16076K 10288K poll 0:01 0.00% 0.00% gnome-settings 268 root 2 0 14924K 11012K poll 0:00 0.00% 0.00% clock-applet 108 root 2 0 920K 528K select 0:00 0.00% 0.00% moused 270 root 2 0 4492K 3552K select 0:00 0.00% 0.00% xterm 432 root 31 0 1912K 1084K RUN 0:00 0.00% 0.00% top 195 root 2 0 5188K 3588K poll 0:00 0.00% 0.00% bonobo-activat 250 root 2 0 6552K 3928K poll 0:00 0.00% 0.00% gnome-vfs-daem 271 root 18 0 1424K 1172K pause0:00 0.00% 0.00% csh 240 root 2 0 7688K 4656K poll 0:00 0.00% 0.00% gnome-smproxy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Missing INDEX file in Ports.
Your missing the point. INDEX is supposed to be in the RELEASES on the CDROMs because the CD's are supposed to be self-contained, ie: you should not require an Internet connection to get a complete install. Otherwise there's no point in even bothering to release the CDROMS in the first place. Included or not, the release is self contained (and don't require an internet in that case) since the INDEX or INDEX-5 file can always be generated from the local ports tree, via : # cd /usr/ports; make index So can many of the utilities - like perl and X - that are now supplied as binaries. Not self-contained on the disk1. I said 'make index', not 'make fetchindex'. The case of packages themselves are another thing, i think. I tend to think that this file was forgotten during the release's process (but i don't know), i just want to point the fact that it can be self-generated without a network connection. Nothing more. I guess you want to go back to the 386BSD days when you had to build all those things yourself. I think you deserve to have your FreeBSD taken away for a month and be forced to run Solaris 2.5.1. That will teach you to smart off about being able to generate things. How would you like a Sendmail upgrade to take 2 hours, eh? Or let's see even better - how about bootstrapping a usable version of gcc on a SunOS box? Been there, done that. We don't want to go back to those days. There's a reason that precompiled and pregenerated stuff is included in the UNIX distributions. Neither Disk 1's require KDE or GNOME to be generated from the sources, either. Nothing wrong here, however that was not my point in this post. -- -jpeg. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Backup to CD-Rs and DVDs
On Saturday 29 January 2005 01:51, Carleton Vaughn wrote: Ian Moore wrote: Anyway, to backup /usr directly to a dvd(+rw), I use the this command: dump -0 -uL -C16 -B4589840 -P 'growisofs -speed=4 -Z /dev/dvd=/dev/fd/0 ' /usr This gives you a dvd or series of dvds with the dump file on them. You can then boot from CD2 (live system) and use restore to restore the data. If the link above is the one I think it is, it gives you an example restore command. I'm in the same boat as Xian. I want to backup to DVD so I can upgrade to 5.3. dump in 4.10 does not have a -P option, and growisofs says nothing about handling spanning, so how do I span my dump over multiple DVDs? dump -h0 -B 4589840 -S /usr says I'm going to need 6.18 tapes. I'm going to crack open a beer and just pipe it, to see what happens. Then some day if all goes well I will split /usr into /usr and /usr/home, 'cause this is ridiculous. Thanks. I have another machine running 4.9 (also without the -P option for dump) and the way I get round it is to create the dump on another disk in pieces then transfer them to another machine for burning. dump usual args -Bsize of dvd -f /home/usr.dump /usr /usr and /home are on different disks. Then when dump asks me if the next volume is ready I move /home/usr.dump to /home/usr/dump.1, then tell dump yes. And so on until dump has finished However I am having some issues with this. I transfer them to another machine, (checking the md5 of them is the same before and after transfer them), and test it with restore restore -Nxvb 2 -f usr.dump.1 and the first volume works fine, it says 'End-of-tape encountered'. I start the next volume and it tells me unexpected tape header abort? [yn] What could be doing this and how do I fix it? -- /Xian Never put off until tomorrow what you can avoid altogether unknown author ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: having 1.5GB RAM I cannot allocate more than 512MB RAM in 4.10
[EMAIL PROTECTED] wrote: I have an AMD Athlon-XP with 1.5GB RAM. Unfortunately my FreeBSD 4.10 throws a memory allocation error when in a simple C++ program I try to allocate with new 512MB of RAM or more. Until 511MB it goes fine! what's the output of ulimit -d? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: OpenLDAP doesn't start
Hello, Thanks a lot, You're right, I installed the OpenLDAP with SASL, but I've reinstalled without the WITH_SASL macro, and it is working now. I'm going to use the LDAP server only from localhost for mail authentication, thus I don't think, I'll need the SASL support in this case. Cheers, Gbor Kvesdn -Original Message- From: Jonathan Chen [mailto:[EMAIL PROTECTED] Sent: Friday, January 28, 2005 8:18 PM To: K?vesd?n G?bor Cc: freebsd-questions@freebsd.org Subject: Re: OpenLDAP doesn't start What's happened here is that prior to you installing OpenLDAP+SASL, you installed a port which used LDAP and brought in a dependancy on OpenLDAP *without* SASL (eg: KDE). The thing to do now is to rebuild all ports which depend on LDAP so that it now depends on OpenLDAP+SASL. Cheers. -- Jonathan Chen [EMAIL PROTECTED] -- If you're right 90% of the time, why quibble about the remaining 3%? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
panic on boot
I woke up this morning to find that my computer had rebooted and panicked as soon as the kernel had started to run. it said: The rights of the University... panic: vm_page_insert: alredy inserted uptime: 0s in bright white on the screen. All I could do was switch it off and on and it just did it again. Help: how do I fix it? It was running 4.9R. This is my home web server that I use quite a lot from college. It is extremely old - its a P90. Thank God for getting me to play around with taking backups 2 days ago. -- /Xian The release of atom power has changed everything except our way of thinking...the solution to this problem lies in the heart of mankind. If only I had known, I should have become a watchmaker. Albert Einstein ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Backup to CD-Rs and DVDs
On Sat, 29 Jan 2005 22:30, Xian wrote: On Saturday 29 January 2005 01:51, Carleton Vaughn wrote: Ian Moore wrote: Anyway, to backup /usr directly to a dvd(+rw), I use the this command: dump -0 -uL -C16 -B4589840 -P 'growisofs -speed=4 -Z /dev/dvd=/dev/fd/0 ' /usr This gives you a dvd or series of dvds with the dump file on them. You can then boot from CD2 (live system) and use restore to restore the data. If the link above is the one I think it is, it gives you an example restore command. I'm in the same boat as Xian. I want to backup to DVD so I can upgrade to 5.3. dump in 4.10 does not have a -P option, and growisofs says nothing about handling spanning, so how do I span my dump over multiple DVDs? dump -h0 -B 4589840 -S /usr says I'm going to need 6.18 tapes. I'm going to crack open a beer and just pipe it, to see what happens. Then some day if all goes well I will split /usr into /usr and /usr/home, 'cause this is ridiculous. Thanks. I have another machine running 4.9 (also without the -P option for dump) and the way I get round it is to create the dump on another disk in pieces then transfer them to another machine for burning. dump usual args -Bsize of dvd -f /home/usr.dump /usr /usr and /home are on different disks. Then when dump asks me if the next volume is ready I move /home/usr.dump to /home/usr/dump.1, then tell dump yes. And so on until dump has finished However I am having some issues with this. I transfer them to another machine, (checking the md5 of them is the same before and after transfer them), and test it with restore restore -Nxvb 2 -f usr.dump.1 and the first volume works fine, it says 'End-of-tape encountered'. I start the next volume and it tells me unexpected tape header abort? [yn] What could be doing this and how do I fix it? That was how I was considering doing backups in DVD sized chunks until I found out the -P option in 5.3. I've just tried doing it in 5.3 works. Here's what I actually did: %sudo dump -1 -B 5 -f /mnt/backups/var.dump /var When prompted for tape 2, in a second xterm I did: %sudo mv var.dump var.dump.1 Then back in xterm1, I said yes to the continue prompt. The dump completed. To restore I did: %restore -Nxvf /mnt/backups/var.dump.1 When asked which tape to use, I said 1 When prompted for tape 2, in xterm2 I did: %sudo mv var.dump.1 var.dump.a %sudo mv var.dump var.dump.1 Then back in xterm1: End-of-tape encountered You have read volumes: 1 Specify next volume #: 2 Mount tape volume 2 Enter ``none'' if there are no more tapes otherwise enter tape name (default: /mnt/backups/var.dump.1) none extract file ./db/entropy/saved-entropy.6 snip extract file ./tmp/kdecache-root/ksycoca Add links Set directory mode, owner, and times. set owner/mode for '.'? [yn] n So it works in 5.3, maybe there is a bug in the old dump or restore program? NB, I didn't need to use -b 2 in the restore command. Perhaps you should try it without that switch. Cheers, -- Ian GPG Key: http://homepages.picknowl.com.au/imoore/imoore.asc pgpTsHuZPUT7d.pgp Description: PGP signature
Re: panic on boot
On Saturday 29 January 2005 08:15 am, Xian wrote: I woke up this morning to find that my computer had rebooted and panicked as soon as the kernel had started to run. it said: The rights of the University... panic: vm_page_insert: alredy inserted uptime: 0s in bright white on the screen. All I could do was switch it off and on and it just did it again. Help: how do I fix it? It was running 4.9R. This is my home web server that I use quite a lot from college. It is extremely old - its a P90. Thank God for getting me to play around with taking backups 2 days ago. I've seen this on various lists before, and I _think_ the general consensus was to first check the RAM by taking all the modules out but one and then adding them back until the panic returns. Hope that helps Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: make buildworld error
On Sat, 29 Jan 2005 05:40:25 -0600, Donald J. O'Neill [EMAIL PROTECTED] wrote: What do you have in your /usr/src/sys/amd64/conf/config file, show me about the first 30 lines of it. config is the kernel config right ? i only did make cleanworld and make buildworld wasnt compiling the kernel yet. I got the error while building world. # /usr/src/sys/amd64/conf/gert # ### machine amd64 cpu HAMMER ident GERT options SCHED_4BSD # ? options INET# InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT# NFS usable as /, requires NFSCLIENT options NTFS# NT File System options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS# Pseudo-filesystem framework options GEOM_GPT# GUID Partition Tables. options COMPAT_IA32 # Compatible with i386 binaries options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options SCSI_DELAY=15000# Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV# install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT# Print register bitfields in debug output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT# Print register bitfields in debug output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. options NO_MIXED_MODE # SK8N options ATA_STATIC_ID # Static device numbering options UDF # DJO device atpic # 8259A compatability device acpi# Bus support device isa # Bus support device pci # Bus support device fdc # Floppy drives device ata # ATA and ATAPI devices device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass# Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support device sc # syscons is the default console driver, resembling an SCO console device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus device sio # 8250, 16[45]50 based serial ports device ppc # Parallel port device ppbus # Parallel port bus (required) device lpt # Printer device plip# TCP/IP over parallel device ppi # Parallel port interface device device miibus # RealTek 8129/8139 device rl # RealTek 8129/8139 device loop# Network loopback device mem # Memory and kernel memory devices device io # I/O device device random # Entropy device device ether # Ethernet support device sl #
Re: make buildworld error
On Sat, 29 Jan 2005 11:17:59 +0100, Peter Harmsen [EMAIL PROTECTED] wrote: Seems to me you specified amd64 in /etc/makeconf. If i remember correctly from some posts ago this is obsolete. You can however switch to 32-bit mode by specifying athlon-xp. Otherwise everything should be auto detected by gcc. why is this obsolete it always worked that way ? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: panic on boot
On Saturday 29 January 2005 13:15, Xian wrote: I woke up this morning to find that my computer had rebooted and panicked as soon as the kernel had started to run. it said: The rights of the University... panic: vm_page_insert: alredy inserted uptime: 0s in bright white on the screen. All I could do was switch it off and on and it just did it again. Help: how do I fix it? It was running 4.9R. This is my home web server that I use quite a lot from college. It is extremely old - its a P90. Thank God for getting me to play around with taking backups 2 days ago. OK a little more research with some 5.3 install floppies. They can't boot either because init dies due to a maloc error. The BIOS only finds a bit more than 900,000KB of memory. I used to have 128MB in 4 sticks of 32MB. This looks like one of the sticks has died to me. Anyone else have any ideas? -- /Xian In C we had to code our own bugs. In C++ we can inherit them unknown author ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Synaptics Touchpad driver
Does anyone know of the status of the Synaptics Touchpad driver for freebsd and what features it currently supports? Currently it's just using the regular ps/2 driver so I have very little control over customizing it. A found a few driver patches that are at least a year old and I heard that there was work on adding the driver to the 5.3 kernel, but I can't seem to find any more recent information. -- I sense much NT in you. NT leads to Bluescreen. Bluescreen leads to downtime. Downtime leads to suffering. NT is the path to the darkside. Powerful Unix is. Public Key: ftp://ftp.tallye.com/pub/lorenl_pubkey.asc Fingerprint: B3B9 D669 69C9 09EC 1BCD 835A FAF3 7A46 E4A3 280C ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: making music
On Wed, Jan 26, 2005 at 08:59:28AM +0100, Gert Cuykens wrote: Does freebsd has programs to make music ? like sonar or logic or fruityloops ? fluidsynth and spiralsynth. Also, you might try checking out http://www.linux-sound.org/ They may have some more software that runs on FreeBSD. All the programs mentioned so far can be found on that site and there is still a lot more that should run on BSD. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- I sense much NT in you. NT leads to Bluescreen. Bluescreen leads to downtime. Downtime leads to suffering. NT is the path to the darkside. Powerful Unix is. Public Key: ftp://ftp.tallye.com/pub/lorenl_pubkey.asc Fingerprint: B3B9 D669 69C9 09EC 1BCD 835A FAF3 7A46 E4A3 280C ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Mouse and Touchpad with moused
On Fri, Jan 28, 2005 at 09:59:31PM +0100, Paul Kaletta wrote: Hi, I have a notebook that has a build in touchpad. I also have an USB-mouse. I figured out that I can use both simultaneously when I have two moused-daemons running, one for psm0 (the Touchpad) and one for usm0 (the USB-Mouse). (I might be wrong about the exact names, but I can't check, since I'm not under FreeBSD right now). This way I can use both mice in X and on the console. But I wasn't able to figure out the correct rc.conf settings. Could anyone help me out on this one? Manually starting moused can't be the solution. It also would be very cool if moused would start automatically when I plug in the USB-Mouse. How can I do this? On my system, FreeBSD 5.3, the usb moused is started automatically by usbd, do you have usbd_enable=YES in your rc.conf? Bye Paul ps: After writing this down, I just had an idea. Maybe the right way to do this is to only set up the touchpad in rc.conf (obvious), and somehow make the USB daemon start moused for the external mouse when it is recognized. How can I do this? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- I sense much NT in you. NT leads to Bluescreen. Bluescreen leads to downtime. Downtime leads to suffering. NT is the path to the darkside. Powerful Unix is. Public Key: ftp://ftp.tallye.com/pub/lorenl_pubkey.asc Fingerprint: B3B9 D669 69C9 09EC 1BCD 835A FAF3 7A46 E4A3 280C ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Backup to CD-Rs and DVDs.
I'm in the same boat as Xian. I want to backup to DVD so I can upgrade to 5.3. dump in 4.10 does not have a -P option, and growisofs says nothing about handling spanning, so how do I span my dump over multiple DVDs? Then some day if all goes well I will split /usr into /usr and /usr/home, 'cause this is ridiculous. There is 2 limitations here: - The dump's option '-P' is relatively new, and not supported on old releases; - A file can't be larger than 2Gb using an ISO 9660 file system. Knowing these 2 points here, here is a sh(1) shell script than i use and which do the following: 1/ Backup a remote FreeBSD system on a local DVD writer; 2/ Currently 5.X since i hardcoded the dump's option '-L') but that is easily bypassed; 3/ Over ssh; 4/ Using a remote user which must be in the group 'operator'; 5/ Because i use the same grown iso fs to hold all the backuped fs, this script need a local temporary space which size just need to be the size of the larger compressed remote fs (generally /usr or /home) not a sum of all of these; 6/ Automatically get the fs to backup from the remote fstab (begining with the root fs). As it is a little _home_script_, there is some caveats to know: - It must launch as root from the local system in order to be able to write to the local DVD burner; - It assume that that the larger compressed remote fs is lesser than the 2Gb limitation (you can for example set the nodump flag on /usr/ports/distfiles/*, if this is not an issue for you, to decrease the size of the /usr dump); - Some commands/options are hardcoded; - May be extended to managed more than one copy of each backuped fs if there is sufficiently space left on the DVD... Oh, yes... to restore just do the following (/home for example): # mount -t cd9660 /dev/cd0 /cdrom # cd /home; gzip -dc /cdrom/home/dump.gz | restore -ivf - -- -jpeg. bckp2dvd.sh Description: Binary data ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: About mount root and usr -ro?
perikillo [EMAIL PROTECTED] writes: If you have a machine running only a firewall, there some advantages mounting / and /usr -ro or is dangers? It makes sense, especially if there won't be users on the machine. Once you setup your rules, disable every thing we dont need, and closing the box for a long time the box will be alone. Raised securelevels are helpful here. [This is pretty much the only situation for which I think securelevels are helpful.] Disabling things you don't need is *always* a good idea. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: enable linux compatibility
Dick Hoogendijk [EMAIL PROTECTED] writes: On 29 Jan Thomas Foster wrote: Try downloading a linux binary or installing a linux based application from ports.. if you do not get any elf binary errors then yo umost likely have the linux compatibility enabled correctly. The only other thing to watch for are any programs that might require linprocfs My FreeBSD-4.11R system gives me on portupgrade linux_base an upgrade to some RH-7.3 linux release. Lots of other ports seem to relate to linux_base-8. If I deinstall linux_base, WHAT other port package do I really need (want). There is lots of them nowadays (redhat, debian, suse; I lost track..) /usr/ports/UPDATING describes how to update to linux_base-8. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Installing the JDK without Xorg
Pat Maddox [EMAIL PROTECTED] writes: I've installed the native jdk14 successfully, but noticed that it installed Xorg along with it. I imagine that's a dependency for the Java plugin or something. I'm using this machine just as a test server, I won't be using X at all, so I'd like to build jdk14 without having to build and install Xorg as well. Is it possible to do that? The actual dependency in the jdk14 port seems to be Open Motif, and there are no knobs to turn it off. I'm not sure why that is; you may need to talk to the port authors (or try changing it yourself) to understand why it's required. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: having 1.5GB RAM I cannot allocate more than 512MB RAM in 4.10
- Original Message - From: Matthias Buelow [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Sent: Saturday, January 29, 2005 7:01 AM Subject: Re: having 1.5GB RAM I cannot allocate more than 512MB RAM in 4.10 [EMAIL PROTECTED] wrote: I have an AMD Athlon-XP with 1.5GB RAM. Unfortunately my FreeBSD 4.10 throws a memory allocation error when in a simple C++ program I try to allocate with new 512MB of RAM or more. Until 511MB it goes fine! what's the output of ulimit -d? What's the trick to running ulimit? command not found yet whereis sez it is a shell builtin command. Jack ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Installing the JDK without Xorg
Thanks for the help. I got a suggestion on a forum to build it as a package...make MINIMAL=yes package I haven't created a package from a port, so I'm not entirely sure what that'll do. It installed Java fine and left me with a bzip2 file. Does this mean I can just copy that file to any other machine I'm using and install Java as a package, so I don't have to wait the long time for it to build? Or would it be better just to build it all on each machine anyway? On 29 Jan 2005 09:56:11 -0500, Lowell Gilbert [EMAIL PROTECTED] wrote: Pat Maddox [EMAIL PROTECTED] writes: I've installed the native jdk14 successfully, but noticed that it installed Xorg along with it. I imagine that's a dependency for the Java plugin or something. I'm using this machine just as a test server, I won't be using X at all, so I'd like to build jdk14 without having to build and install Xorg as well. Is it possible to do that? The actual dependency in the jdk14 port seems to be Open Motif, and there are no knobs to turn it off. I'm not sure why that is; you may need to talk to the port authors (or try changing it yourself) to understand why it's required. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Squid 2.5.7_8 - 2.5.7_9 portupgrade fails
Juha Saarinen [EMAIL PROTECTED] writes: Trying to update Squid, as portaudit complains about the existing version, but not having much success despite make clean and refetching the sources: === Applying distribution patches for squid-2.5.7_9 === Applying extra patch /usr/ports/www/squid/files/follow_xff-2.5.patch 1 out of 5 hunks failed--saving rejects to src/structs.h.rej *** Error code 1 Yep; that patch looks broken. OPTIONS=... SQUID_FOLLOW_XFF Follow X-Forwarded-For headers off \ ... Why is the patch being applied nevertheless? By default, it isn't being applied for me. Try make rmconfig clean and try again. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: having 1.5GB RAM I cannot allocate more than 512MB RAM in 4.10
what's the output of ulimit -d? What's the trick to running ulimit? command not found yet whereis sez it is a shell builtin command. Jack What about limits? -- PGP: http://www.darklogik.org/pub/pgp/pgp.txt B776 43DC 8A5D EAF9 2126 9A67 A7DA 390F DEFF 9DD1 pgpXZZaTvjCl5.pgp Description: PGP signature
Re: having 1.5GB RAM I cannot allocate more than 512MB RAM in 4.10
On Sat, Jan 29, 2005 at 08:58:21AM -0600, antenneX wrote: - Original Message - From: Matthias Buelow [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Sent: Saturday, January 29, 2005 7:01 AM Subject: Re: having 1.5GB RAM I cannot allocate more than 512MB RAM in 4.10 [EMAIL PROTECTED] wrote: I have an AMD Athlon-XP with 1.5GB RAM. Unfortunately my FreeBSD 4.10 throws a memory allocation error when in a simple C++ program I try to allocate with new 512MB of RAM or more. Until 511MB it goes fine! what's the output of ulimit -d? What's the trick to running ulimit? command not found yet whereis sez it is a shell builtin command. You must be using a csh-derivative. It is a built-in for the Bourne- shell family of shells. Now that you bring it up, I'm not sure how you get this functionality from a csh environment - I guess just create a script that is just #/bin/sh ulimit $* or something like that... Did you try doing a man ulimit? It should give the builtin command support matrix... -- John Lind [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: having 1.5GB RAM I cannot allocate more than 512MB RAM in 4.10
On Sat, Jan 29, 2005 at 03:04:51PM +, markzero wrote: what's the output of ulimit -d? What's the trick to running ulimit? command not found yet whereis sez it is a shell builtin command. Jack What about limits? Ah - there it is - thanks. (blush) -- John Lind [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Xorg config failure - help requested
Folks: Your kind help is solicited in the matter of an xorg config which fails to initialize on (EE) Screen(s) found, but none have a usable configuration. Hardware is Sony PCV-L640, which is packaged from the manufacturer with an LCD display, Sony part number PCVA-15XTAP2. The maker's spec on the display calls out native resolution of 1024x768, and vidcontrol seems to confirm this. Additionally, DDC seems to find the display and read a reasonable set of parms. This notwithstanding, xorg server initialization fails. I've tried explicitly specifying DisplaySize, HorizSync, VertRefresh in the Monitor block of the conf file, to no avail. Log files, config files, and supporting data below. Any ideas concerning some means of torturing this config into working will be welcome. Thanks. AEB ** /var/log/Xorg.0.log X Window System Version 6.8.1 Release Date: 17 September 2004 X Protocol Version 11, Revision 0, Release 6.8.1 Build Operating System: FreeBSD 5.3 i386 [ELF] Current Operating System: FreeBSD susanna.aebeard.net 5.3-RELEASE-p5 FreeBSD 5.3-RELEASE-p5 #0: Sat Jan 22 07:38:39 EST 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 Build Date: 22 January 2005 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Wed Jan 26 09:56:29 2005 (++) Using config file: /root/xorg.conf.new (==) ServerLayout X.org Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Card0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (WW) `fonts.dir' not found (or not valid) in /usr/X11R6/lib/X11/fonts/CID/. Entry deleted from font path. (Run 'mkfontdir' on /usr/X11R6/lib/X11/fonts/CID/). (**) FontPath set to /usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (**) ModulePath set to /usr/X11R6/lib/modules (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on freebsd (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=X.Org Foundation compiled for 6.8.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=X.Org Foundation compiled for 6.8.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card , rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card , rev 03 class 06,04,00 hdr 01 (II) PCI: 00:03:0: chip 104c,8009 card 104d,8032 rev 01 class 0c,00,10 hdr 00 (II) PCI: 00:05:0: chip 1180,0475 card fffc, rev 80 class 06,07,00 hdr 02 (II) PCI: 00:06:0: chip 12eb,0003 card 104d,807c rev 03 class 04,01,00 hdr 00 (II) PCI: 00:07:0: chip 8086,7110 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card , rev 02 class 06,80,00 hdr 00 (II) PCI: 00:08:0: chip 104d,808a card 104d,808c rev 01 class 05,01,00 hdr 00 (II) PCI: 00:0a:0: chip 11c1,044e card 13e0,0405 rev 00 class 07,80,00 hdr 00 (II) PCI: 00:0b:0: chip 10ec,8139 card 1186,1300 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 1002,5052 card 104d,808b rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0088 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0xd000 - 0xdfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xdf00 - 0xdfef (0xf0) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xdff0 - 0xe3ff (0x410) MX[B] (II)
Re: I need a cuppa...
On Sat, Jan 15, 2005 at 09:05:22PM -0800, Tabor Kelly wrote: Jonathan Chen wrote: On Sat, Jan 15, 2005 at 09:06:17PM -0600, John wrote: OK, I must be dumb as a rock, because this has to have been discussed and documented 16 ways from Sunday, but I've looked in the FAQ, and looked in the Handbook, and I've gone through my copy of the latest edition of _The Complete FreeBSD_, but I simply do NOT get how to get Java support for FreeBSD. I don't need the JDK, unless that's the only way to get a viable JRE. You can't get a separate 1.4+ JRE for FreeBSD, you need to install the JDK; the JDK is available as a port in java/jdk14. Cheers. But make sure you have linprocfs mounted before you try to build it (and obviously linux emulation). PS- Linux emulation is for bootstrapping purposes. java/jdk14 requires java/linux-sun-jdk14 to compile, afterwards java/linux-sun-jdk14 can be safely removed. This whole process if VERY arcane and confusing for me! I have tried to follow the instructions, but of course, some parts have moved forward during the interim. I have just done a cvsup of ports-all, because I couldn't find the parts on Sun that were old enough to match 5.3-RELEASE (!!), but having done all that, and signing all the license agreements, and downloading the various files, it is STILL grabbing and downloading stuff. I have linux.ko loaded, and I mounted linprocfs, but it is saying things like: == Warning: This JDK may be unstable. You are advised to use the native FreeBSD JDK, in ports/java/jdk14. This Java VM will attempt to obtain some system information by accessing files in linux's procfs. You must install the Linux emulation procfs filesystem for this to work correctly. The JVM will exhibit various problems otherwise. This can be accomplished by adding the following line to your /etc/fstab file: linprocfs /compat/linux/proc linprocfs rw 0 0 and then, as root, executing the commands: kldload linprocfs mount /compat/linux/proc == Should I be concerned? I thought I'd already done all the prereq's, but it is still complianing. I AM DOING exactly what it says - I got this output as a result of a make in /ports/java/jdk14. Right now, it is grabbing all SORTS of linux distributions. basesystem, libelf, libacl, filesystem - it's as if I'm trying to build all of Linux in my FreeBSD tree. This just doesn't seem right! -- John Lind [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Xorg config failure - help requested
On Sat, Jan 29, 2005 at 10:47:08AM -0500, Alan E. Beard wrote: Folks: Your kind help is solicited in the matter of an xorg config which fails to initialize on (EE) Screen(s) found, but none have a usable configuration. Hardware is Sony PCV-L640, which is packaged from the manufacturer with an LCD display, Sony part number PCVA-15XTAP2. The maker's spec on the display calls out native resolution of 1024x768, and vidcontrol seems to confirm this. Additionally, DDC seems to find the display and read a reasonable set of parms. This notwithstanding, xorg server initialization fails. I've tried explicitly specifying DisplaySize, HorizSync, VertRefresh in the Monitor block of the conf file, to no avail. Log files, config files, and supporting data below. Any ideas concerning some means of torturing this config into working will be welcome. I had the same sorts of problems trying to use the x config scripts. My advice is to ignore the config scripts and follow the simple procedure in the FreeBSD handbook - X -configure and then test, check the log file to see if the monitor information is in there, or if not, search the web for an X11 entry for your monitor, or dig up the monitor specs and build it by hand. Other than the monitor part, it is quick and easy. Now I have X.org up and runnning on four different machines - and I'm loving it! -- John Lind [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I need a cuppa...
I'm not sure if you've seen the below link or not, but it worked perfectly for me as I was trying to get Java working. http://www.brettsbsd.net/~estrabd/blog/index.php?/archives/21_Java_1.4_on_FreeBSD_4.10_in_8_steps.html Hope that helps some. On Sat, 29 Jan 2005 10:10:00 -0600, John [EMAIL PROTECTED] wrote: On Sat, Jan 15, 2005 at 09:05:22PM -0800, Tabor Kelly wrote: Jonathan Chen wrote: On Sat, Jan 15, 2005 at 09:06:17PM -0600, John wrote: OK, I must be dumb as a rock, because this has to have been discussed and documented 16 ways from Sunday, but I've looked in the FAQ, and looked in the Handbook, and I've gone through my copy of the latest edition of _The Complete FreeBSD_, but I simply do NOT get how to get Java support for FreeBSD. I don't need the JDK, unless that's the only way to get a viable JRE. You can't get a separate 1.4+ JRE for FreeBSD, you need to install the JDK; the JDK is available as a port in java/jdk14. Cheers. But make sure you have linprocfs mounted before you try to build it (and obviously linux emulation). PS- Linux emulation is for bootstrapping purposes. java/jdk14 requires java/linux-sun-jdk14 to compile, afterwards java/linux-sun-jdk14 can be safely removed. This whole process if VERY arcane and confusing for me! I have tried to follow the instructions, but of course, some parts have moved forward during the interim. I have just done a cvsup of ports-all, because I couldn't find the parts on Sun that were old enough to match 5.3-RELEASE (!!), but having done all that, and signing all the license agreements, and downloading the various files, it is STILL grabbing and downloading stuff. I have linux.ko loaded, and I mounted linprocfs, but it is saying things like: == Warning: This JDK may be unstable. You are advised to use the native FreeBSD JDK, in ports/java/jdk14. This Java VM will attempt to obtain some system information by accessing files in linux's procfs. You must install the Linux emulation procfs filesystem for this to work correctly. The JVM will exhibit various problems otherwise. This can be accomplished by adding the following line to your /etc/fstab file: linprocfs /compat/linux/proc linprocfs rw 0 0 and then, as root, executing the commands: kldload linprocfs mount /compat/linux/proc == Should I be concerned? I thought I'd already done all the prereq's, but it is still complianing. I AM DOING exactly what it says - I got this output as a result of a make in /ports/java/jdk14. Right now, it is grabbing all SORTS of linux distributions. basesystem, libelf, libacl, filesystem - it's as if I'm trying to build all of Linux in my FreeBSD tree. This just doesn't seem right! -- John Lind [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I need a cuppa...
I don't think I ever saw that message you got, but I remember that it did download a ton of Xorg stuff because there was a motif dependency or something. As far as linux goes...you need to have linux emulation enabled, because you use a linux JDK to build the native one. So make sure you've got linux emulation working, install the linux-sun jdk, and then build the native JDK. It's all detailed in that link I gave you. On Sat, 29 Jan 2005 10:21:47 -0600, John [EMAIL PROTECTED] wrote: On Sat, Jan 29, 2005 at 09:19:01AM -0700, Pat Maddox wrote: I'm not sure if you've seen the below link or not, but it worked perfectly for me as I was trying to get Java working. http://www.brettsbsd.net/~estrabd/blog/index.php?/archives/21_Java_1.4_on_FreeBSD_4.10_in_8_steps.html Hope that helps some. I'll check it out. Did you get the same message and did it fetch huge chunks of linux in the process? -- John Lind [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
break in /sysutils/dar?
I'm trying to install the /sysutils/dar port (so I can install kdar). Build is fine, but I get the following when trying to 'make install': ... make install-exec-hook cd //usr/local/bin ; upx -9 dar dar_xform dar_slave dar_manager dar_cp Ultimate Packer for eXecutables Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 UPX 1.25 Markus F.X.J. Oberhumer Laszlo Molnar Jun 29th 2004 File size Ratio Format Name -- --- --- upx: dar: IOException: file is write protected -- skipped upx: dar_xform: IOException: file is write protected -- skipped upx: dar_slave: IOException: file is write protected -- skipped upx: dar_manager: IOException: file is write protected -- skipped upx: dar_cp: IOException: file is write protected -- skipped Packed 0 files. *** Error code 1 Stop in /usr/ports/sysutils/dar/work/dar-2.1.5/src/dar_suite. *** Error code 1 Stop in /usr/ports/sysutils/dar/work/dar-2.1.5/src/dar_suite. *** Error code 1 Stop in /usr/ports/sysutils/dar/work/dar-2.1.5/src/dar_suite. *** Error code 1 Stop in /usr/ports/sysutils/dar/work/dar-2.1.5/src. *** Error code 1 Stop in /usr/ports/sysutils/dar/work/dar-2.1.5. *** Error code 1 Stop in /usr/ports/sysutils/dar. wizard# Any ideas (am I doing something wrong), or should this be reported as a bug? I've googled it and checked the project's forum but didn't find anything. Thanks, Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ipfw statefull ruleset problem
Hi everyone, I have a question regarding my statefull ipfw ruleset. I have the following rules: ---begin--- $cmd 00015 check-state #www $cmd 00200 allow tcp from any to any 80 out via $pif setup keep-state #mail $cmd 00231 allow tcp from any to any 110 out via $pif setup keep-state #ftp $cmd 00283 allow tcp from any to any 21 out via $pif setup keep-state # Allow in standard www function because I have apache server $cmd 00400 allow tcp from any to me 80 in via $pif setup limit src-addr 2 # Allow in FTP $cmd 00410 allow tcp from any to me 21 in via $pif setup limit src-addr 2 # Allow in mail $cmd 00420 allow tcp from any to me 110 in via $pif ---end--- (there are a lot more rules, but these are the ones that it's about) The problem that I'm having is that I can't check mail, and can't FTP and see a lot of: ipfw: 299 Deny TCP [my-server-ip]:80 [some-ip]:[some-port-other-than-80] out via em0 messages in my logfile. When I try to check mail I see in my log: ipfw: 299 Deny TCP [my-server-ip]:110 [my-home-pc-ip]:[some-port-other-than-110] out via em0 What happens (I think, as far as I understand ipfw), there is an connection setup on port 21/80/110 (ftp/http/mail), which is allowed by the rules. A dynamic rules is created, but then the other computer switches ports. The check-state command checks for a dynamic rule, but the port doesn't match anymore and so it doesn't find a dynamic rule and the other rules also don't apply, since they only allow connection initialization. Am I correct? I can solve all this by putting in the rule: # $cmd 00020 allow tcp from any to any established But I learned that that is not the right way to do this in a statefull ruleset, because the dynamic rules don't have any use in this way. So what is the right way to solve this? Thanks a lot in advance! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: enable linux compatibility
Well, personally I use linux_base-8.. but you can use whichever suits your needs.. exactly what linux binaries are you attempting to run on this system? T - Original Message - From: Dick Hoogendijk [EMAIL PROTECTED] To: Thomas Foster [EMAIL PROTECTED] Cc: freebsd-questions freebsd-questions@freebsd.org Sent: Saturday, January 29, 2005 2:04 AM Subject: Re: enable linux compatibility On 29 Jan Thomas Foster wrote: Try downloading a linux binary or installing a linux based application from ports.. if you do not get any elf binary errors then yo umost likely have the linux compatibility enabled correctly. The only other thing to watch for are any programs that might require linprocfs My FreeBSD-4.11R system gives me on portupgrade linux_base an upgrade to some RH-7.3 linux release. Lots of other ports seem to relate to linux_base-8. If I deinstall linux_base, WHAT other port package do I really need (want). There is lots of them nowadays (redhat, debian, suse; I lost track..) -- dick -- http://nagual.st/ -- PGP/GnuPG key: F86289CE ++ Running FreeBSD 4.11 ++ FreeBSD 5.3 + Nai tiruvantel ar vayuvantel i Valar tielyanna nu vilja ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Free BSD 5.3 SMP Kernel
Jon, On Sat, 2005-01-29 at 11:24, Jon Mercer wrote: I'm just guessing, but it sounds like you come from a Linux background. Sort of, I have used Linux in the past (including building Kernels) but only came back to it recently I've also played with Solaris on a Sun Ultra. I'm looking to replace some of my servers etc which are running W2K server. I have tried Fedora but it is not stable enough for a production environment. Hence Free BSD. BTW neither FC2 or 3 will install on the Proliant - probably due to lack of EISA support. What you want to do is roll your own kernel by copying the /usr/src/sys/i386/conf/GENERIC file to /usr/src/sys/i386/conf/MYSYSTEMNAME Upper case system names are traditionally used for the kernel config file in unix. HP-UX is the same, IIRC. Edit in: quote # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel device apic# I/O APIC /quote You will also want to change things like ident to MYSYSTEMNAME. There are a plethora of other options to have a play with as well. after you've finished editing go to /usr/src and run make buildkernel KERNCONF=MYSYSTEMNAME Its running now, but taking it's time. I'm not surprised as it only running on 1 cylinder so to speak. then make installkernel KERNCONF=MYSYSTEMNAME then reboot. http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html will help you tremendously. Personally I find the whole process much simpler than configuring a Linux kernel. Regards, Jon On Sat, 2005-01-29 at 11:12 +, Robert Slade wrote: Hi, I am new to Free BSD ( and Linux) and have just setup a rather old Proliant 5000 as a test machine. It has Quad PII processors and I would like to make use of them. The Install CDs only come with the 'Standard' kernel. Looking through the handbook implies that support for multiple processors in 5.3 was removed due to problems. I have seen references to a 5.3 SMP kernal though, is it possible to get hold of this, or do I have to wait for 5.4 to be released? If so when is this likely to be released. Sorry if this is a simple question. Thanks Rob Again many thanks. Rob ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
realplayer
I've installed linux-realplayer, but about:plugins says: Helix DNA Plugin: RealPlayer G2 Plug-In Compatible File name: nphelix.so Helix DNA Plugin: RealPlayer G2 Plug-In Compatible version 0.4.0.404 built with gcc 3.2.0 on Dec 14 2004 Is this realplayer 10? If so, how come when I go to realplayer.com to test it, nothing works? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Xorg config failure - help requested
On Sat, 29 Jan 2005, John wrote: On Sat, Jan 29, 2005 at 10:47:08AM -0500, Alan E. Beard wrote: Folks: Your kind help is solicited in the matter of an xorg config which fails to initialize on (EE) Screen(s) found, but none have a usable configuration. Hardware is Sony PCV-L640, which is packaged from the manufacturer with an LCD display, Sony part number PCVA-15XTAP2. The maker's spec on the display calls out native resolution of 1024x768, and vidcontrol seems to confirm this. Additionally, DDC seems to find the display and read a reasonable set of parms. This notwithstanding, xorg server initialization fails. I've tried explicitly specifying DisplaySize, HorizSync, VertRefresh in the Monitor block of the conf file, to no avail. Log files, config files, and supporting data below. Any ideas concerning some means of torturing this config into working will be welcome. I had the same sorts of problems trying to use the x config scripts. My advice is to ignore the config scripts and follow the simple procedure in the FreeBSD handbook - X -configure and then test, check the log file to see if the monitor information is in there, or if not, search the web for an X11 entry for your monitor, or dig up the monitor specs and build it by hand. Other than the monitor part, it is quick and easy. The procedure you describe above was executed in this case; the conf file in the original message was generated by 'Xorg -configure', and the log file was generated by 'Xorg -conf /root/xorg.conf.new'. Additionally, the same release of xorg is running successfully on three of my 12 machines - the others run x clients only (in the case of the headless boxes), or (in two cases) are still running 4.10 with XFree86. This problem appears to be specific to the particular hardware configuration described in my initial note. (By way of explanation, the machine in question had run W2K until last week, but I decided to upgrade it to FreeBSD 5.3 for better reliability and improved function.) I have searched the X.org archives (and even resorted to google) for config information specific to the display called out above - with null result. Now I have X.org up and runnning on four different machines - and I'm loving it! See above. Perhaps a detailed look at the log file will reveal to you a clue which I have overlooked. I've not yet tried an explcit 'modeline' config - but my interpretation of the log from a subsequent run with the explicit monitor parms generated by -configure (but commented out in the auto-generated config) uncommented seems to indicate that the initialization process is failing to read the Monitor block, or the values are being overridden. Any substantive notions will be welcome. Regards, AEB -- Alan E. Beard [EMAIL PROTECTED] AEBeard Consulting; 4109 Chelsea Ln; Lakeland FL 33809 863.815.2529 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
DNS
hello i have finished of installing my freebsd, and i ran a DNS server (named) my DNS server listens only to my local network and it does not listens to real world (i mean for resolving). how can i make it to listen to the real world? thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: DNS
Does it have a publically accessible interface that can be accessed via an internet connection, or is it behind a Firewall/NAT/Router? Is UDP port 53 accessible if it is behind a Router? Are you hosting a publically resolvable domain name? T - Original Message - From: ZaiD Dashti [EMAIL PROTECTED] To: freebsd-questions@freebsd.org Sent: Saturday, January 29, 2005 9:14 AM Subject: DNS hello i have finished of installing my freebsd, and i ran a DNS server (named) my DNS server listens only to my local network and it does not listens to real world (i mean for resolving). how can i make it to listen to the real world? thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: DNS
ZaiD Dashti wrote: hello i have finished of installing my freebsd, and i ran a DNS server (named) my DNS server listens only to my local network and it does not listens to real world (i mean for resolving). how can i make it to listen to the real world? thanks 1. Purchase the O'Reilly book on Bind http://www.oreilly.com/catalog/dns4/ ISBN: 0-596-00158-4 2. Read said book 3. Read book again 4. Go here: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-dns.html -- Best regards, Chris Real programmers don't advertise their hangovers. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
message for port developers
you know those blue configuration screens where you can select some configuration options ? Is it possible to first do ALL configuration screens of all the dependencies before building the ports ? So you know there will not be any screens until its done and you can spend the time doing something els ? Cant be that hart to do or am i mistaken ? thx ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Anyone made pkgtools.conf's ALT_PKGDEP work?
I have this in my pkgtools.conf: ALT_PKGDEP = { 'apache-1.3.*' = 'apache+mod_ssl-1.3.*', 'openldap-client-*' = 'openldap-sasl-client-*', 'openldap-server-*' = 'openldap-sasl-server-*' } However, I still get errors like this all the time after upgrading ports: # portversion -vL= Stale dependency: gtk-qt-engine-0.6 -- openldap-client-2.2.19 -- manually run 'pkgdb -F' to fix, or specify -O to force. It seems that the ALT_PKGDEP values should be rewriting that dependency on openldap-client-2.2.19 to openldap-sasl-client-2.2.19 automatically but it never does. Has anyone made this work, or should I file a PR? -- Kirk Strauser pgpfaWUb6H7T2.pgp Description: PGP signature
Re: DNS
yes i have a ADSL router, and i redirect all ports to freebsd machine when i connect to apache server (from outside my network and also locally) it work, but i don't know why DNS gaves me timeout. there is no nating or firewall, only router, yes the udp is accessable i'm trying to run DNS server, cuz i want to host my domain (just for learning how to host) From: Thomas Foster [EMAIL PROTECTED] To: ZaiD Dashti [EMAIL PROTECTED],freebsd-questions@freebsd.org Subject: Re: DNS Date: Sat, 29 Jan 2005 09:20:37 -0800 Does it have a publically accessible interface that can be accessed via an internet connection, or is it behind a Firewall/NAT/Router? Is UDP port 53 accessible if it is behind a Router? Are you hosting a publically resolvable domain name? T - Original Message - From: ZaiD Dashti [EMAIL PROTECTED] To: freebsd-questions@freebsd.org Sent: Saturday, January 29, 2005 9:14 AM Subject: DNS hello i have finished of installing my freebsd, and i ran a DNS server (named) my DNS server listens only to my local network and it does not listens to real world (i mean for resolving). how can i make it to listen to the real world? thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: message for port developers
On 01/29/05 18:42, Gert Cuykens wrote: you know those blue configuration screens where you can select some configuration options ? Is it possible to first do ALL configuration screens of all the dependencies before building the ports ? So you know there will not be any screens until its done and you can spend the time doing something els ? Cant be that hart to do or am i mistaken ? I'm not a port developer but I think you are looking for either `make configure` or the BATCH variable. If you know which ports you want to install on your system, you can do a `make configure' for each port (where it is availeable) and then have a skript fire up the `make install's. I'm not sure though if that works recursively, i.e. you run `make configure' for e.g. the Gnome meta port and you configure all the dependencies with that one command. Why don't you try it? ;-) If you think the default options are ok for you, you can add a line like BATCH=yes in /etc/make.conf and the ports will be built w/o any user interaction. Very useful for large builds. HTH, Phil. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: message for port developers
On Sat, 29 Jan 2005 11:47:02 -0600, Kirk Strauser [EMAIL PROTECTED] wrote: On Saturday 29 January 2005 11:42 am, Gert Cuykens wrote: Cant be that hart to do or am i mistaken ? Unfortunately, you're mistaken. Some of those option screens would cause new ports to be installed, so before building the top-level port you'd have to recursively walk the dependency list to configure those other ports, store the user-chosen options somewhere, and then re-walk the dependency list to actually build them. Sure, it *could* be done, but I imagine it'd involved a huge amount of effort. -- Kirk Strauser So any plans for tomorow :P ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: DNS
From: Thomas Foster [EMAIL PROTECTED] To: ZaiD Dashti [EMAIL PROTECTED],freebsd-questions@freebsd.org Subject: Re: DNS Date: Sat, 29 Jan 2005 09:20:37 -0800 Does it have a publically accessible interface that can be accessed via an internet connection, or is it behind a Firewall/NAT/Router? Is UDP port 53 accessible if it is behind a Router? Are you hosting a publically resolvable domain name? T - Original Message - From: ZaiD Dashti [EMAIL PROTECTED] To: freebsd-questions@freebsd.org Sent: Saturday, January 29, 2005 9:14 AM Subject: DNS hello i have finished of installing my freebsd, and i ran a DNS server (named) my DNS server listens only to my local network and it does not listens to real world (i mean for resolving). how can i make it to listen to the real world? thanks Properly formated: ZaiD Dashti wrote: yes i have a ADSL router, and i redirect all ports to freebsd machine when i connect to apache server (from outside my network and also locally) it work, but i don't know why DNS gaves me timeout. there is no nating or firewall, only router, yes the udp is accessable i'm trying to run DNS server, cuz i want to host my domain (just for learning how to host) Contact your ISP - if you wish to host your domain, you need to be authoritive. Most DSL providers (that I have dealt with) will not do that. -- Best regards, Chris If everything is coming your way, you're in the wrong lane. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: message for port developers
On Sat, 29 Jan 2005 19:01:57 +0100, Phil Schulz [EMAIL PROTECTED] wrote: I'm not a port developer but I think you are looking for either `make configure` or the BATCH variable. If you know which ports you want to install on your system, you can do a `make configure' for each port (where it is availeable) and then have a skript fire up the `make install's. I'm not sure though if that works recursively, i.e. you run `make configure' for e.g. the Gnome meta port and you configure all the dependencies with that one command. Why don't you try it? ;-) If you think the default options are ok for you, you can add a line like BATCH=yes in /etc/make.conf and the ports will be built w/o any user interaction. Very useful for large builds. HTH, Phil. BATCH=yes i can not do because some configuration leave some very nice toys out. Now lets see you can call all dependencies with this if your index is working :) make pretty-print-build-depends-list so with some grep magic you could tell to do make config in all does dependencies. Now the trickie part how do you find out the new dependencies after does configure screens ? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: message for port developers
On Sat, 29 Jan 2005 19:17:46 +0100, Gert Cuykens [EMAIL PROTECTED] wrote: On Sat, 29 Jan 2005 19:01:57 +0100, Phil Schulz [EMAIL PROTECTED] wrote: I'm not a port developer but I think you are looking for either `make configure` or the BATCH variable. If you know which ports you want to install on your system, you can do a `make configure' for each port (where it is availeable) and then have a skript fire up the `make install's. I'm not sure though if that works recursively, i.e. you run `make configure' for e.g. the Gnome meta port and you configure all the dependencies with that one command. Why don't you try it? ;-) If you think the default options are ok for you, you can add a line like BATCH=yes in /etc/make.conf and the ports will be built w/o any user interaction. Very useful for large builds. HTH, Phil. BATCH=yes i can not do because some configuration leave some very nice toys out. Now lets see you can call all dependencies with this if your index is working :) make pretty-print-build-depends-list so with some grep magic you could tell to do make config in all does dependencies. Now the trickie part how do you find out the new dependencies after does configure screens ? a maybe updating the index and do the same thing all over again until there are no new dependencies ? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: message for port developers
On Sat, 29 Jan 2005 19:22:18 +0100, Gert Cuykens [EMAIL PROTECTED] wrote: On Sat, 29 Jan 2005 19:17:46 +0100, Gert Cuykens [EMAIL PROTECTED] wrote: On Sat, 29 Jan 2005 19:01:57 +0100, Phil Schulz [EMAIL PROTECTED] wrote: I'm not a port developer but I think you are looking for either `make configure` or the BATCH variable. If you know which ports you want to install on your system, you can do a `make configure' for each port (where it is availeable) and then have a skript fire up the `make install's. I'm not sure though if that works recursively, i.e. you run `make configure' for e.g. the Gnome meta port and you configure all the dependencies with that one command. Why don't you try it? ;-) If you think the default options are ok for you, you can add a line like BATCH=yes in /etc/make.conf and the ports will be built w/o any user interaction. Very useful for large builds. HTH, Phil. BATCH=yes i can not do because some configuration leave some very nice toys out. Now lets see you can call all dependencies with this if your index is working :) make pretty-print-build-depends-list so with some grep magic you could tell to do make config in all does dependencies. Now the trickie part how do you find out the new dependencies after does configure screens ? a maybe updating the index and do the same thing all over again until there are no new dependencies ? can you update the index after a configure that adds a extra dependencie to the port ? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: message for port developers
On 01/29/05 19:27, Gert Cuykens wrote: On Sat, 29 Jan 2005 19:22:18 +0100, Gert Cuykens [EMAIL PROTECTED] wrote: On Sat, 29 Jan 2005 19:17:46 +0100, Gert Cuykens [EMAIL PROTECTED] wrote: On Sat, 29 Jan 2005 19:01:57 +0100, Phil Schulz [EMAIL PROTECTED] wrote: I'm not a port developer but I think you are looking for either `make configure` or the BATCH variable. If you know which ports you want to install on your system, you can do a `make configure' for each port (where it is availeable) and then have a skript fire up the `make install's. I'm not sure though if that works recursively, i.e. you run `make configure' for e.g. the Gnome meta port and you configure all the dependencies with that one command. Why don't you try it? ;-) If you think the default options are ok for you, you can add a line like BATCH=yes in /etc/make.conf and the ports will be built w/o any user interaction. Very useful for large builds. HTH, Phil. BATCH=yes i can not do because some configuration leave some very nice toys out. If you know what specific options you are looking for, you could configure the ports by hand and install them later. I think not all ports can be build with BATCH defined, at least that's what ports(7) suggests. Now lets see you can call all dependencies with this if your index is working :) make pretty-print-build-depends-list so with some grep magic you could tell to do make config in all does dependencies. Now the trickie part how do you find out the new dependencies after does configure screens ? a maybe updating the index and do the same thing all over again until there are no new dependencies ? can you update the index after a configure that adds a extra dependencie to the port ? I don't know. I don't think it would be very efficient in terms of effort vs. use. How many ports do you really want to install with non-default options? And how often do you re-configure them? You probably want to wait for an opinion from someone else who knows more, though. Phil. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Adding a partition
* David J. Weller-Fahy [EMAIL PROTECTED] [2005-01-29 00:49 +0100]: h: 52487298 1038090244.2BSD 2048 16384 28552 You will need to be booted in such a way as nothing on that slice is mounted to be able to write the new label, I believe. Ah! That's what I was missing. Thanks for the tip, I'll try it out tomorrow and let the list know how it goes. I booted into single user mode, did the deed, and rebooted. All is well so far. Thanks for the tip! Regards, -- dave [ please don't CC me ] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ipmon writes to security.* in 5.3
I have a 5.3-STABLE machine with ipfilter built into the kernel. When running ipmon logging to syslog, the information is being dumped to the security.* service instead of the local0.* service like the handbook says it should. I've taken a quick look at the code and it appears it should be going to local0.* like expected and like it did for me on 4.10, but it's not. I see the following in UPDATE: 20041003: The pfil API has gained an additional argument to pass an inpcb. You should rebuild all pfil consuming modules: ipfw, ipfilter and pf. but I don't think that should affect me since I installed 5.3-RELEASE and have rebuilt to the current (two weeks ago) 5.3-STABLE. Does anyone have any recommendations? Pointers to blatantly obvious documentation are perfectly acceptable, if warranted. Thanks, Joe. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: message for port developers
On Sat, Jan 29, 2005 at 06:42:55PM +0100, Gert Cuykens wrote: you know those blue configuration screens where you can select some configuration options ? Is it possible to first do ALL configuration screens of all the dependencies before building the ports ? Not currently, no. So you know there will not be any screens until its done and you can spend the time doing something els ? Cant be that hart to do or am i mistaken ? It has already been implemented, but not yet commited to the ports tree. See PR 76254 for a patch. -- Insert your favourite quote here. Erik Trulsson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: message for port developers
On Sat, 29 Jan 2005 19:41:49 +0100, Phil Schulz [EMAIL PROTECTED] wrote: On 01/29/05 19:27, Gert Cuykens wrote: On Sat, 29 Jan 2005 19:22:18 +0100, Gert Cuykens [EMAIL PROTECTED] wrote: On Sat, 29 Jan 2005 19:17:46 +0100, Gert Cuykens [EMAIL PROTECTED] wrote: On Sat, 29 Jan 2005 19:01:57 +0100, Phil Schulz [EMAIL PROTECTED] wrote: I'm not a port developer but I think you are looking for either `make configure` or the BATCH variable. If you know which ports you want to install on your system, you can do a `make configure' for each port (where it is availeable) and then have a skript fire up the `make install's. I'm not sure though if that works recursively, i.e. you run `make configure' for e.g. the Gnome meta port and you configure all the dependencies with that one command. Why don't you try it? ;-) If you think the default options are ok for you, you can add a line like BATCH=yes in /etc/make.conf and the ports will be built w/o any user interaction. Very useful for large builds. HTH, Phil. BATCH=yes i can not do because some configuration leave some very nice toys out. If you know what specific options you are looking for, you could configure the ports by hand and install them later. I think not all ports can be build with BATCH defined, at least that's what ports(7) suggests. Now lets see you can call all dependencies with this if your index is working :) make pretty-print-build-depends-list so with some grep magic you could tell to do make config in all does dependencies. Now the trickie part how do you find out the new dependencies after does configure screens ? a maybe updating the index and do the same thing all over again until there are no new dependencies ? can you update the index after a configure that adds a extra dependencie to the port ? I don't know. I don't think it would be very efficient in terms of effort vs. use. How many ports do you really want to install with non-default options? And how often do you re-configure them? You probably want to wait for an opinion from someone else who knows more, though. Phil. Lest see how far we can get you have to help me do because i suck at development :) main{ newdependencies= yes; dependencies = make pretty-print-run-depends-list; WHILE newdependencies=yes DO configure(dependencies); dependencies=(make pretty-print-run-depends-list) - (currentdependencies) IF dependencies = nulll { newdependencies = no } } function configure(dependencies){ WHILE dependencies DO{ grep(dependencies,i); make configure;} } ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: message for port developers
On Sat, 29 Jan 2005 20:21:08 +0100, Gert Cuykens [EMAIL PROTECTED] wrote: On Sat, 29 Jan 2005 19:41:49 +0100, Phil Schulz [EMAIL PROTECTED] wrote: On 01/29/05 19:27, Gert Cuykens wrote: On Sat, 29 Jan 2005 19:22:18 +0100, Gert Cuykens [EMAIL PROTECTED] wrote: On Sat, 29 Jan 2005 19:17:46 +0100, Gert Cuykens [EMAIL PROTECTED] wrote: On Sat, 29 Jan 2005 19:01:57 +0100, Phil Schulz [EMAIL PROTECTED] wrote: I'm not a port developer but I think you are looking for either `make configure` or the BATCH variable. If you know which ports you want to install on your system, you can do a `make configure' for each port (where it is availeable) and then have a skript fire up the `make install's. I'm not sure though if that works recursively, i.e. you run `make configure' for e.g. the Gnome meta port and you configure all the dependencies with that one command. Why don't you try it? ;-) If you think the default options are ok for you, you can add a line like BATCH=yes in /etc/make.conf and the ports will be built w/o any user interaction. Very useful for large builds. HTH, Phil. BATCH=yes i can not do because some configuration leave some very nice toys out. If you know what specific options you are looking for, you could configure the ports by hand and install them later. I think not all ports can be build with BATCH defined, at least that's what ports(7) suggests. Now lets see you can call all dependencies with this if your index is working :) make pretty-print-build-depends-list so with some grep magic you could tell to do make config in all does dependencies. Now the trickie part how do you find out the new dependencies after does configure screens ? a maybe updating the index and do the same thing all over again until there are no new dependencies ? can you update the index after a configure that adds a extra dependencie to the port ? I don't know. I don't think it would be very efficient in terms of effort vs. use. How many ports do you really want to install with non-default options? And how often do you re-configure them? You probably want to wait for an opinion from someone else who knows more, though. Phil. Lest see how far we can get you have to help me do because i suck at development :) damn forgot to rename currentdependencies to dependencies main{ newdependencies= yes; dependencies = make pretty-print-run-depends-list; WHILE newdependencies=yes DO configure(dependencies); dependencies=(make pretty-print-run-depends-list) - (dependencies) IF dependencies = nulll { newdependencies = no } } function configure(dependencies){ WHILE dependencies DO{ grep(dependencies,i); make configure;} } ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Network problem after upgrade from 5.1 to 5.3
Hi ! I am long time user of FreeBSD and for must updates so far I hadn't had much to do (maybe option here and option there, but networking never changes), but after upgrade from 5.1 to 5.3 everything stoped working. Since I couldn't rebuild kernel (some internal problems), I decided to delete everything and reinstal from scratch (last time I did this was when disk crashed, and that was about 5 years ago). But now again nothing works. I didn't change any configuration files since instalation except, rc.conf, and copied my firewall.conf and natd.conf... Even after recompiled I couldn't use network. My FreeBSD is used as server and also router for my internal network (using NAT). Problem: == If I disable firewall, natd is turned down so inside computers can't get to internet through FreeBSD box, if enabled, then nothing works. It seems like small trouble in Firewall, but I don't know why. I usually didn't make any changes to firewall since I am not guru there... Config: = FreeBSD BOX- dc0: external IP | V rl0: internal IP 192.168.44.1 - Hub I was using NATD and firewall (I have my own rules for both and everything worked before), I have compiled IPDIVERT and IPFIREWALL into kernel. Startup rc.conf: === defaultrouter=xx.xx.5.1 # Set to default gateway (or NO). firewall_enable=YES # Set to YES to enable firewall functionality firewall_silent=YES firewall_type=/etc/firewall.conf # Firewall type (see /etc/rc.firewall) gateway_enable=YES# Set to YES if this host will be a gateway. hostname=atechnet.dhs.org # Set this! ifconfig_dc0=inet xx.xx.5.51 netmask 255.255.255.0 ifconfig_lo0=inet 127.0.0.1 netmask 255.255.255.0 ifconfig_rl0=inet 192.168.44.1 netmask 255.255.255.0 natd_enable=YES # Enable natd (if firewall_enable ==YES). natd_flags=-s -u -f /etc/natd.conf natd_interface=dc0 network_interfaces=auto natd.conf (This is just for redirection of emule ports) === redirect_port tcp 192.168.44.2:4662 4662 redirect_port udp 192.168.44.2:4672 4672 redirect_port tcp 192.168.44.2:4711 4711 redirect_port tcp 192.168.44.1:5432 5432 redirect_port udp 192.168.44.1:5432 5432 firewall.conf (this is open firewall with added ports for redirection) = add 00050 set 0 divert 8668 ip from any to any add 00100 set 0 allow ip from any to any add 00200 set 0 deny ip from any to 127.0.0.0/8 add 00300 set 0 deny ip from 127.0.0.0/8 to any add 1 set 0 allow udp from any 4672 to 192.168.44.2 dst-port 4672 add 10001 set 0 allow tcp from any 4662 to 192.168.44.2 dst-port 4662 add 10002 set 0 allow tcp from any 4711 to 192.168.44.2 dst-port 4711 add 65000 set 0 allow ip from any to any Please help me, I need to make my server active again, but I can't do that unless whole network is working... Andy ** * Aleksander Rozman - Andy * Fandoms: E2:EA, SAABer, Trekkie, Earthie * * [EMAIL PROTECTED] * Sentinel, BH 90210, True's Trooper, * *[EMAIL PROTECTED] * Heller's Angel, Questie, Legacy, PO5, * * Maribor, Slovenia (Europe) * Profiler, Buffy (Slayerete), Pretender* * ICQ-UIC: 4911125 * * PGP key available *http://www.atechnet.dhs.org/~andy/ * ** ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: make buildworld error
On Saturday 29 January 2005 07:55 am, Gert Cuykens wrote: On Sat, 29 Jan 2005 11:17:59 +0100, Peter Harmsen [EMAIL PROTECTED] wrote: Seems to me you specified amd64 in /etc/makeconf. If i remember correctly from some posts ago this is obsolete. You can however switch to 32-bit mode by specifying athlon-xp. Otherwise everything should be auto detected by gcc. why is this obsolete it always worked that way ? Gert, I had not seen this post until now, and I'm not sure about the question your asking about. It seems to me, he is saying that using CPUTYPE=?amd64 in your make.conf is obsolete. Your error message would seem to confirm ths cc -O -pipe -march=amd64 -DIN_GCC -DHAVE_LD_EH_FRAME_HDR -finhibit-size-directive -fno-inline-functions -fno-exceptions -fno-zero-initialized-in-bss -fno-omit-frame-pointer -fno-unit-at-a-time -I/usr/src/gnu/lib/csu/../../../contrib/gcc/config -I/usr/src/gnu/lib/csu/../../../contrib/gcc -I. -I/usr/src/gnu/lib/csu/../../usr.bin/cc/cc_tools -g0 -DCRT_BEGIN -c -o crtbegin.o /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c:1: error: bad value (amd64) for -march= switch /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c:1: error: bad value (amd64) for -mtune= switch *** Error code 1 You see the bottom 4 lines? I see a bad value (amd64) for -march= switch and a bad (amd64) for -mtune= switch . Try changing you make.conf file to use CPUTYPE=?hammer, if that works go on to the next step. If it fails, see if you've got a similar error message. Try removing CPUTYPE=? whaterver you now from your make.conf file. This is probably the way that will work. Please, send me this information, I need to know! What is the supfile you're using? Have you done a recent cvsup? Did you dump the refuse file? Please do so if you haven't already, it takes care of a lot of cvsup problems. Have you ever done a successful buildworld sequence on the computer? Don -- Donald J. O'Neill [EMAIL PROTECTED] I'm not totally useless, I can be used as a bad example. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: make buildworld error
On Sat, 29 Jan 2005 13:27:15 -0600, Donald J. O'Neill [EMAIL PROTECTED] wrote: On Saturday 29 January 2005 07:55 am, Gert Cuykens wrote: On Sat, 29 Jan 2005 11:17:59 +0100, Peter Harmsen [EMAIL PROTECTED] wrote: Seems to me you specified amd64 in /etc/makeconf. If i remember correctly from some posts ago this is obsolete. You can however switch to 32-bit mode by specifying athlon-xp. Otherwise everything should be auto detected by gcc. why is this obsolete it always worked that way ? Gert, I had not seen this post until now, and I'm not sure about the question your asking about. It seems to me, he is saying that using CPUTYPE=?amd64 in your make.conf is obsolete. Your error message would seem to confirm ths cc -O -pipe -march=amd64 -DIN_GCC -DHAVE_LD_EH_FRAME_HDR -finhibit-size-directive -fno-inline-functions -fno-exceptions -fno-zero-initialized-in-bss -fno-omit-frame-pointer -fno-unit-at-a-time -I/usr/src/gnu/lib/csu/../../../contrib/gcc/config -I/usr/src/gnu/lib/csu/../../../contrib/gcc -I. -I/usr/src/gnu/lib/csu/../../usr.bin/cc/cc_tools -g0 -DCRT_BEGIN -c -o crtbegin.o /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c:1: error: bad value (amd64) for -march= switch /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c:1: error: bad value (amd64) for -mtune= switch *** Error code 1 You see the bottom 4 lines? I see a bad value (amd64) for -march= switch and a bad (amd64) for -mtune= switch . Try changing you make.conf file to use CPUTYPE=?hammer, if that works go on to the next step. If it fails, see if you've got a similar error message. Try removing CPUTYPE=? whaterver you now from your make.conf file. This is probably the way that will work. Please, send me this information, I need to know! What is the supfile you're using? Have you done a recent cvsup? Did you dump the refuse file? Please do so if you haven't already, it takes care of a lot of cvsup problems. Have you ever done a successful buildworld sequence on the computer? Don -- Donald J. O'Neill [EMAIL PROTECTED] I'm not totally useless, I can be used as a bad example. yep i did it a few times before i could build world and kernel without any troubles. the world i am now using is done that way 7rxI# uname -a FreeBSD 7rxI 5.3-STABLE FreeBSD 5.3-STABLE #0: Tue Nov 30 11:49:43 CET 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/gert amd64 7rxI# ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: having 1.5GB RAM I cannot allocate more than 512MB RAM in 4.10
This is the output of my ulimit: #ulimit -a | grep data data seg size (kbytes, -d) 524288 # So what is next? Is it possible to embed that information in the kernel? Or, how is this information set by default? Is there any specific .conf file I should edit? Thank you all! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: make buildworld error
On Sat, 29 Jan 2005 20:33:12 +0100, Gert Cuykens [EMAIL PROTECTED] wrote: On Sat, 29 Jan 2005 13:27:15 -0600, Donald J. O'Neill [EMAIL PROTECTED] wrote: On Saturday 29 January 2005 07:55 am, Gert Cuykens wrote: On Sat, 29 Jan 2005 11:17:59 +0100, Peter Harmsen [EMAIL PROTECTED] wrote: Seems to me you specified amd64 in /etc/makeconf. If i remember correctly from some posts ago this is obsolete. You can however switch to 32-bit mode by specifying athlon-xp. Otherwise everything should be auto detected by gcc. why is this obsolete it always worked that way ? Gert, I had not seen this post until now, and I'm not sure about the question your asking about. It seems to me, he is saying that using CPUTYPE=?amd64 in your make.conf is obsolete. Your error message would seem to confirm ths cc -O -pipe -march=amd64 -DIN_GCC -DHAVE_LD_EH_FRAME_HDR -finhibit-size-directive -fno-inline-functions -fno-exceptions -fno-zero-initialized-in-bss -fno-omit-frame-pointer -fno-unit-at-a-time -I/usr/src/gnu/lib/csu/../../../contrib/gcc/config -I/usr/src/gnu/lib/csu/../../../contrib/gcc -I. -I/usr/src/gnu/lib/csu/../../usr.bin/cc/cc_tools -g0 -DCRT_BEGIN -c -o crtbegin.o /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c:1: error: bad value (amd64) for -march= switch /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c:1: error: bad value (amd64) for -mtune= switch *** Error code 1 You see the bottom 4 lines? I see a bad value (amd64) for -march= switch and a bad (amd64) for -mtune= switch . Try changing you make.conf file to use CPUTYPE=?hammer, if that works go on to the next step. If it fails, see if you've got a similar error message. Try removing CPUTYPE=? whaterver you now from your make.conf file. This is probably the way that will work. Please, send me this information, I need to know! What is the supfile you're using? Have you done a recent cvsup? Did you dump the refuse file? Please do so if you haven't already, it takes care of a lot of cvsup problems. Have you ever done a successful buildworld sequence on the computer? Don -- Donald J. O'Neill [EMAIL PROTECTED] I'm not totally useless, I can be used as a bad example. yep i did it a few times before i could build world and kernel without any troubles. the world i am now using is done that way 7rxI# uname -a FreeBSD 7rxI 5.3-STABLE FreeBSD 5.3-STABLE #0: Tue Nov 30 11:49:43 CET 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/gert amd64 7rxI# it stoped working after a cvsup i will remove the refuse file and do some test with the make.conf ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: make buildworld error
On Sat, 29 Jan 2005 20:37:59 +0100, Gert Cuykens [EMAIL PROTECTED] wrote: On Sat, 29 Jan 2005 20:33:12 +0100, Gert Cuykens [EMAIL PROTECTED] wrote: On Sat, 29 Jan 2005 13:27:15 -0600, Donald J. O'Neill [EMAIL PROTECTED] wrote: On Saturday 29 January 2005 07:55 am, Gert Cuykens wrote: On Sat, 29 Jan 2005 11:17:59 +0100, Peter Harmsen [EMAIL PROTECTED] wrote: Seems to me you specified amd64 in /etc/makeconf. If i remember correctly from some posts ago this is obsolete. You can however switch to 32-bit mode by specifying athlon-xp. Otherwise everything should be auto detected by gcc. why is this obsolete it always worked that way ? Gert, I had not seen this post until now, and I'm not sure about the question your asking about. It seems to me, he is saying that using CPUTYPE=?amd64 in your make.conf is obsolete. Your error message would seem to confirm ths cc -O -pipe -march=amd64 -DIN_GCC -DHAVE_LD_EH_FRAME_HDR -finhibit-size-directive -fno-inline-functions -fno-exceptions -fno-zero-initialized-in-bss -fno-omit-frame-pointer -fno-unit-at-a-time -I/usr/src/gnu/lib/csu/../../../contrib/gcc/config -I/usr/src/gnu/lib/csu/../../../contrib/gcc -I. -I/usr/src/gnu/lib/csu/../../usr.bin/cc/cc_tools -g0 -DCRT_BEGIN -c -o crtbegin.o /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c:1: error: bad value (amd64) for -march= switch /usr/src/gnu/lib/csu/../../../contrib/gcc/crtstuff.c:1: error: bad value (amd64) for -mtune= switch *** Error code 1 You see the bottom 4 lines? I see a bad value (amd64) for -march= switch and a bad (amd64) for -mtune= switch . Try changing you make.conf file to use CPUTYPE=?hammer, if that works go on to the next step. If it fails, see if you've got a similar error message. Try removing CPUTYPE=? whaterver you now from your make.conf file. This is probably the way that will work. Please, send me this information, I need to know! What is the supfile you're using? Have you done a recent cvsup? Did you dump the refuse file? Please do so if you haven't already, it takes care of a lot of cvsup problems. Have you ever done a successful buildworld sequence on the computer? Don -- Donald J. O'Neill [EMAIL PROTECTED] I'm not totally useless, I can be used as a bad example. yep i did it a few times before i could build world and kernel without any troubles. the world i am now using is done that way 7rxI# uname -a FreeBSD 7rxI 5.3-STABLE FreeBSD 5.3-STABLE #0: Tue Nov 30 11:49:43 CET 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/gert amd64 7rxI# it stoped working after a cvsup i will remove the refuse file and do some test with the make.conf ### # supfile # ## *default tag=RELENG_5 *default host=cvsup15.FreeBSD.org *default prefix=/usr *default base=/usr *default release=cvs *default delete use-rel-suffix src-all ports-all tag=. doc-all ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: make buildworld error
-Original Message- From: [EMAIL PROTECTED] [mailto:owner-freebsd- [EMAIL PROTECTED] On Behalf Of Donald J. O'Neill Sent: Sunday, January 30, 2005 0:57 To: Gert Cuykens Cc: freebsd-questions@freebsd.org Subject: Re: make buildworld error snip You see the bottom 4 lines? I see a bad value (amd64) for -march= switch and a bad (amd64) for -mtune= switch . Try changing you make.conf file to use CPUTYPE=?hammer, if that works go on to the next step. If it fails, see if you've got a similar error message. The correct way would be CPUTYPE=k8 as all Hammers are basically having K8 cores. This is also revealed in dmesg. snip Regards S. Indian Institute of Information Technology Subhro Sankha Kar Block AQ-13/1, Sector V Salt Lake City PIN 700091 India smime.p7s Description: S/MIME cryptographic signature
Re: make buildworld error
On Sun, 30 Jan 2005 01:11:32 +0530, Subhro [EMAIL PROTECTED] wrote: The correct way would be CPUTYPE=k8 as all Hammers are basically having K8 cores. This is also revealed in dmesg. my dmesg CPU: AMD Athlon(tm) 64 FX-53 Processor (2400.01-MHz K8-class CPU) Origin = AuthenticAMD Id = 0xf5a Stepping = 10 Features=0x78bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: having 1.5GB RAM I cannot allocate more than 512MB RAM in 4.10
This is the output of my ulimit: #ulimit -a | grep data data seg size (kbytes, -d) 524288 # So what is next? Is it possible to embed that information in the kernel? Or, how is this information set by default? Is there any specific .conf file I should edit? Thank you all! You'll want to change your default segment size in /etc/login.conf. You'll need to re-generate the database after editing with cap_mkdb too. Mark -- PGP: http://www.darklogik.org/pub/pgp/pgp.txt B776 43DC 8A5D EAF9 2126 9A67 A7DA 390F DEFF 9DD1 pgp7xUO3xDToy.pgp Description: PGP signature
Re: Cyrus IMAP crashes after reading /etc/krb5.conf
On Fri, 28 Jan 2005 21:59:21 -0500, Mikhail Teterin [EMAIL PROTECTED] wrote: Hello! I'm trying to configure a freshly built mail/cyrus-imapd22 to work and authenticate accounts -- Kerberos and plain text. The GSSAPI authentication works already. After doing kinit, I can do ``imtest -m GSSAPI hostname'' and it succeeds. Now I'm trying to login with plain text (over SSL). Cyrus' imapd keeps crashing from SIGBUS. According to ktrace, this happens right after reading the krb5.conf (I replaced our domain with example below): The freebsd-security list is for security issue with the FreeBSD operating system. Your question involves a port question. freebsd-questions, cyrus mailing list, or freebsd-ports is where you should have posted. You'll need to use gdb on the cyrus-imapd .core file to find out where it is failing. You'll also need a version of the cyrus-imapd compiled with debugging symbols to get something usefull out of gdb. i.e. gdb /usr/ports/mail/cyrus-imapd22/work/cyrus-imapd-2.2*/location of file/name of cyrus-imapd -c /location of core file/name of cyrus-imapd.core (check the man page, I'm not sure -c is correct for the core file) then use bt (backtrace) in gdb and it will show you the src file function where the failure is occuring. You may also want to look at the values of some of the variables (i.e. p varname, p *varname, p varname) Scot PS. I BCC freebsd-security, do not post any replies there. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Seeking performance tuning pointers/tracking down GIANT
Lucky Green wrote: System: Dual processor Intel PentiumPro motherboard. FreeBSD 5.3 SMP kernel. fxp 100baseT NIC. I am managing a system that is running tor, a fairly network intensive service. See http://tor.eff.org The service processes about 7Mbps symmetric traffic sustained. top shows about 33% CPU idle. There is plenty of inactive/free RAM. While server throughput grew steadily over time, throughput appears to have hit a ceiling at between 7 and 8 Mbps. You can't do more than around 8-10 megabytes per second of actual data via a 100 Mbs link due to network protocol overhead, packet collisions, and such. If you want this thing to go significantly faster, consider gigabit ethernet. [ If you're only getting 8 megabits per second, then that's another case... ] -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: break in /sysutils/dar?
Mike Hauber [EMAIL PROTECTED] writes: I'm trying to install the /sysutils/dar port (so I can install kdar). Build is fine, but I get the following when trying to 'make install': ... make install-exec-hook cd //usr/local/bin ; upx -9 dar dar_xform dar_slave dar_manager dar_cp Ultimate Packer for eXecutables Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 UPX 1.25 Markus F.X.J. Oberhumer Laszlo Molnar Jun 29th 2004 File size Ratio Format Name -- --- --- upx: dar: IOException: file is write protected -- skipped upx: dar_xform: IOException: file is write protected -- skipped upx: dar_slave: IOException: file is write protected -- skipped upx: dar_manager: IOException: file is write protected -- skipped upx: dar_cp: IOException: file is write protected -- skipped Packed 0 files. *** Error code 1 Stop in /usr/ports/sysutils/dar/work/dar-2.1.5/src/dar_suite. *** Error code 1 Stop in /usr/ports/sysutils/dar/work/dar-2.1.5/src/dar_suite. *** Error code 1 Stop in /usr/ports/sysutils/dar/work/dar-2.1.5/src/dar_suite. *** Error code 1 Stop in /usr/ports/sysutils/dar/work/dar-2.1.5/src. *** Error code 1 Stop in /usr/ports/sysutils/dar/work/dar-2.1.5. *** Error code 1 Stop in /usr/ports/sysutils/dar. wizard# Any ideas (am I doing something wrong), or should this be reported as a bug? I've googled it and checked the project's forum but didn't find anything. It just built and for me; perhaps you forgot to install as root? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: One-line global string replace in all files with sed (or awk?)
On Fri, 28 Jan 2005 17:54:06 +0200, Giorgos Keramidas [EMAIL PROTECTED] wrote: I honestly feel pity for the Windows using friends I have in cases like this. Don't do that, just point them to: http://www.microsoft.com/windows/sfu/default.asp and to: http://www.interopsystems.com/tools/ Not perfect by any means, but surprisingly helpful at times. ;) -- Juha ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: make buildworld error
On Saturday 29 January 2005 01:49 pm, Gert Cuykens wrote: On Sun, 30 Jan 2005 01:11:32 +0530, Subhro [EMAIL PROTECTED] wrote: The correct way would be CPUTYPE=k8 as all Hammers are basically having K8 cores. This is also revealed in dmesg. my dmesg CPU: AMD Athlon(tm) 64 FX-53 Processor (2400.01-MHz K8-class CPU) Origin = AuthenticAMD Id = 0xf5a Stepping = 10 Features=0x78bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2 Gert, Take the advice of Subhro, this should cut playing around time down. Ignore the two examples I gave, unless you want to see what happens. Don -- Donald J. O'Neill [EMAIL PROTECTED] I'm not totally useless, I can be used as a bad example. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: make buildworld error
On Sat, 29 Jan 2005 14:45:52 -0600, Donald J. O'Neill [EMAIL PROTECTED] wrote: On Saturday 29 January 2005 01:49 pm, Gert Cuykens wrote: On Sun, 30 Jan 2005 01:11:32 +0530, Subhro [EMAIL PROTECTED] wrote: The correct way would be CPUTYPE=k8 as all Hammers are basically having K8 cores. This is also revealed in dmesg. my dmesg CPU: AMD Athlon(tm) 64 FX-53 Processor (2400.01-MHz K8-class CPU) Origin = AuthenticAMD Id = 0xf5a Stepping = 10 Features=0x78bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2 Gert, Take the advice of Subhro, this should cut playing around time down. Ignore the two examples I gave, unless you want to see what happens. Don -- Donald J. O'Neill [EMAIL PROTECTED] I'm not totally useless, I can be used as a bad example. k8 seems to work thx guy's :) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Docs for Berkeley Make?
Hi all, I just got the O'Reilly book on GNU Make, but I'd really like to focus on Berkeley Make when possible. Where can I find some good examples (other than the source tree makefiles, which are very complex) and documentation on the differences between the two versions of make? TIA, jm -- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Docs for Berkeley Make?
On 2005-01-29 20:53, Jonathon McKitrick [EMAIL PROTECTED] wrote: I just got the O'Reilly book on GNU Make, but I'd really like to focus on Berkeley Make when possible. Where can I find some good examples (other than the source tree makefiles, which are very complex) and documentation on the differences between the two versions of make? If you have the doc package set installed, look in: /usr/share/doc/psd/12.make If not, the same documents are available as part of the online FreeBSD documentation set: http://docs.FreeBSD.org/ This is not a comparison of GNU make and BSD make. It's just a guide for BSD make. I believe it's a guide that is better than trying to decipher the makefiles of the src/ tree. AFAIK, the latter tend to depend on a lot of features of the src/share/mk/* stuff, which are not necessarily available and do not work exactly the same with all versions of BSD make out there. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Squid 2.5.7_8 - 2.5.7_9 portupgrade fails
On 29 Jan 2005 10:03:08 -0500, Lowell Gilbert [EMAIL PROTECTED] wrote: By default, it isn't being applied for me. Try make rmconfig clean and try again. Yes, that works. Probably the usual operator error. -- Juha ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
2 quick firewall questions for FreBSD
First, if one were to deploy FreeBSD 5.3 as a standard web and email server, would it need a firewall? I don't see the point because only ports like 25 for smtp, 110 for pop, 80 for http, etc... will be listening and open for connections with or without a firewall. Second, I would like to replace my Linux gateway running Shorewall. Shorewall is a nice package for managing the netfilter firewall capabilities of the Linux kernel. Is there something similar for FreeBSD? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 2 quick firewall questions for FreBSD
Andy Firman wrote: First, if one were to deploy FreeBSD 5.3 as a standard web and email server, would it need a firewall? I don't see the point because only ports like 25 for smtp, 110 for pop, 80 for http, etc... will be listening and open for connections with or without a firewall. Second, I would like to replace my Linux gateway running Shorewall. Shorewall is a nice package for managing the netfilter firewall capabilities of the Linux kernel. Is there something similar for FreeBSD? Let's look at #2 - Is this server running a WM? If so, why? -- Best regards, Chris If the faulty part is in stock, it didn't need replacing in the first place. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 2 quick firewall questions for FreBSD
Andy Firman wrote: Second, I would like to replace my Linux gateway running Shorewall. Shorewall is a nice package for managing the netfilter firewall capabilities of the Linux kernel. Is there something similar for FreeBSD? personally i don't like Shorewall at all but.. imho m0n0wall rocks : http://www.m0n0.ch/wall/ :) - based on FreeBSD - you can run it from a soekris, or from cdrom+floppy or from hdd - more responsive (at configuring) than some hardware-routers i've tried - features amongst others portforwarding, VPN, traffic shaper, traffic grapher ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 2 quick firewall questions for FreBSD
Having a firewall prevents rogue programs from opening up other ports on your machine. You have to worry about services you don't install and configure just as much (maybe even more so) as the services you do install. On Sat, 29 Jan 2005 12:50:51 -0900, Andy Firman [EMAIL PROTECTED] wrote: First, if one were to deploy FreeBSD 5.3 as a standard web and email server, would it need a firewall? I don't see the point because only ports like 25 for smtp, 110 for pop, 80 for http, etc... will be listening and open for connections with or without a firewall. Second, I would like to replace my Linux gateway running Shorewall. Shorewall is a nice package for managing the netfilter firewall capabilities of the Linux kernel. Is there something similar for FreeBSD? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 2 quick firewall questions for FreBSD
For FreeBSD.. I highly recommend PF http://www.section6.net/help/pf.php Hope this helps T - Original Message - From: Andy Firman [EMAIL PROTECTED] To: freebsd-questions@freebsd.org Sent: Saturday, January 29, 2005 1:50 PM Subject: 2 quick firewall questions for FreBSD First, if one were to deploy FreeBSD 5.3 as a standard web and email server, would it need a firewall? I don't see the point because only ports like 25 for smtp, 110 for pop, 80 for http, etc... will be listening and open for connections with or without a firewall. Second, I would like to replace my Linux gateway running Shorewall. Shorewall is a nice package for managing the netfilter firewall capabilities of the Linux kernel. Is there something similar for FreeBSD? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Installing the JDK without Xorg
On Sun, 30 Jan 2005 01:29, Pat Maddox wrote: Thanks for the help. I got a suggestion on a forum to build it as a package...make MINIMAL=yes package I haven't created a package from a port, so I'm not entirely sure what that'll do. It installed Java fine and left me with a bzip2 file. Does this mean I can just copy that file to any other machine I'm using and install Java as a package, so I don't have to wait the long time for it to build? Or would it be better just to build it all on each machine anyway? Yes, making a package means you can install that on other machines using pkg_add. This is a great idea, since you don't have to go through the agony of building the linux jdk again to bootstrap the compile on the other machine(s). One caveat - if you have make options that optimise the build for a particular processor, you may run into trouble running it on other processors. Cheers, Ian On 29 Jan 2005 09:56:11 -0500, Lowell Gilbert [EMAIL PROTECTED] wrote: Pat Maddox [EMAIL PROTECTED] writes: I've installed the native jdk14 successfully, but noticed that it installed Xorg along with it. I imagine that's a dependency for the Java plugin or something. I'm using this machine just as a test server, I won't be using X at all, so I'd like to build jdk14 without having to build and install Xorg as well. Is it possible to do that? The actual dependency in the jdk14 port seems to be Open Motif, and there are no knobs to turn it off. I'm not sure why that is; you may need to talk to the port authors (or try changing it yourself) to understand why it's required. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Ian GPG Key: http://homepages.picknowl.com.au/imoore/imoore.asc pgpk7WwMg89iY.pgp Description: PGP signature
Re: Installing the JDK without Xorg
I built it on an Athlon XP, couple years old, and I'm going to install the jdk on a Barton machine. So it should work if I install it as a package... On the other hand, it's a production server, so I imagine I should probably just build it from scratch, just to be safe. On Sun, 30 Jan 2005 09:08:47 +1030, Ian Moore [EMAIL PROTECTED] wrote: On Sun, 30 Jan 2005 01:29, Pat Maddox wrote: Thanks for the help. I got a suggestion on a forum to build it as a package...make MINIMAL=yes package I haven't created a package from a port, so I'm not entirely sure what that'll do. It installed Java fine and left me with a bzip2 file. Does this mean I can just copy that file to any other machine I'm using and install Java as a package, so I don't have to wait the long time for it to build? Or would it be better just to build it all on each machine anyway? Yes, making a package means you can install that on other machines using pkg_add. This is a great idea, since you don't have to go through the agony of building the linux jdk again to bootstrap the compile on the other machine(s). One caveat - if you have make options that optimise the build for a particular processor, you may run into trouble running it on other processors. Cheers, Ian On 29 Jan 2005 09:56:11 -0500, Lowell Gilbert [EMAIL PROTECTED] wrote: Pat Maddox [EMAIL PROTECTED] writes: I've installed the native jdk14 successfully, but noticed that it installed Xorg along with it. I imagine that's a dependency for the Java plugin or something. I'm using this machine just as a test server, I won't be using X at all, so I'd like to build jdk14 without having to build and install Xorg as well. Is it possible to do that? The actual dependency in the jdk14 port seems to be Open Motif, and there are no knobs to turn it off. I'm not sure why that is; you may need to talk to the port authors (or try changing it yourself) to understand why it's required. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Ian GPG Key: http://homepages.picknowl.com.au/imoore/imoore.asc ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
/var Full ?
I am running FBSD 5.2.1 and my /var partition is giving me cannot write to disk errors, disk is full. I cleared out what I could and got it down to about 98% but I have some strange findings which I will show below. [/var] df -h FilesystemSize Used Avail Capacity Mounted on /dev/ad0s1a 248M55M 173M24%/ devfs 1.0K 1.0K 0B 100%/dev /dev/ad0s1e 248M38K 228M 0%/tmp /dev/ad0s1f70G53G11G83%/usr /dev/ad0s1d 248M 223M 4.5M98%/var #cd /var # du -hd1 2.0K./account 6.0K./at 16K./backups 4.0K./crash 390K./cron 5.8M./db 2.0K./empty 2.0K./heimdal 508K./log 1.9M./mail 4.0K./msgs 2.0K./preserve 40K./run 2.0K./rwho 66K./spool 1.3M./tmp 20K./yp 2.0K./games 1.0M./ftp 394K./usermin 2.0K./.snap 11M. Now how can /var be 11Meg and also fill up 98% or 223 Meg at the same time? What is eating up my partition space? Uptime is 149 days and I suppose I'm due for a reboot but I have others with processes going on the box and I hate to reboot. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: realplayer-10 on my FBSD-4.10
On Sat, Jan 29, 2005 at 02:06:16AM -0800, Gary Kline wrote: A few days ago I got help from this list in getting an update of realplayer-10 working on my laptop. The laptop has v5.3. Here I'm still using 4.10 and have run into new problems. realplayer-8 worked fine, BTW. When I type %realplay, after a few seconds the following is printed to stdout: No fonts found; this probably means that the fontconfig library is not correctly configured. You may need to edit the fonts.conf configuration file. More information about fontconfig can be found in the fontconfig(3) manual page and on http://fontconfig.org I poked around, finally found that both fontconfig and linux-fontconfig were installed. I found fonts.conf in /usr/X11R6/etc/fonts but don't understand what needs to be configured. Anybody else know what I'm doing wrong? (/etc/libmap.conf looks okay, I have linux_base 8 and the linuxpluginwrapper installed. I'm stumped. === sOrry to reply to my own post, but in doing a reinstall of linux-realplayer I see some Gome hooks. Is the No fonts found err related to something-gnome that I'm missng?? gary -- Gary Kline [EMAIL PROTECTED] www.thought.org Public service Unix ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Installing the JDK without Xorg
On Sun, 30 Jan 2005 09:22:19 +1030, Ian Moore [EMAIL PROTECTED] wrote: On Sun, 30 Jan 2005 09:13, Pat Maddox wrote: I built it on an Athlon XP, couple years old, and I'm going to install the jdk on a Barton machine. So it should work if I install it as a package... Pardon my ignorance, but what is a Barton machine? I've never heard of such a beast. It's just a particular core for the Athlon. http://www.anandtech.com/cpuchipsets/showdoc.aspx?i=1783p=2 On the other hand, it's a production server, so I imagine I should probably just build it from scratch, just to be safe. You can always try the package see if it runs without errors. It should work, they're both Athlons. I just wonder if there'd be any benefit at all to building it from scratch on the production machine. I'm not sure, really. It's not a big deal for me to build it, time isn't of the essence or anything. Thanks for the thoughts. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: having 1.5GB RAM I cannot allocate more than 512MB RAM in 4.10
John wrote: what's the output of ulimit -d? You must be using a csh-derivative. It is a built-in for the Bourne- shell family of shells. the csh correspondent is limit. it only affects the shell and its children (so put a setting in /etc/profile, /etc/csh.login, or configure the limit via /etc/login.conf if you want it to be global). mkb. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]