FreeBSD7 and realtek 8111C
Hello! I have the motherboard with realtek 8111C LAN Card. On FreeBSD6.3 it's card is work fine with driver from realtek wesite - rtl_bsd_drv_v175.tgz archive. Build this driver on 7.0-STABLE is not work. I'm hacked this and driver is compile without problems, but LAN card works is very unstable - system hang, when i'm downoad file ~10 seconds. Maybe there are people who can bring to mind my hack? I'm attached driver and patch. -- Regards, Andrey. rtl_bsd_drv_v176.diff Description: Binary data ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD7 and realtek 8111C
2008/9/3 Jason Lenthe [EMAIL PROTECTED]: Andrey Slusar wrote: Hello! I have the motherboard with realtek 8111C LAN Card. On FreeBSD6.3 it's card is work fine with driver from realtek wesite - rtl_bsd_drv_v175.tgz archive. Build this driver on 7.0-STABLE is not work. I'm hacked this and driver is compile without problems, but LAN card works is very unstable - system hang, when i'm downoad file ~10 seconds. Maybe there are people who can bring to mind my hack? I'm attached driver and patch. I have this board on an Intel D945GCNL motherboard and the driver that comes with FreeBSD 7 works just fine for me. Why are you trying to use the driver from the website? This NIC is unsupported. May bee on you motherboard the realtek 8111B card, not C. 8111B is works fine. See this PR: http://www.freebsd.org/cgi/query-pr.cgi?pr=123123 -- Regards, Andrey. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD7 and realtek 8111C
2008/9/3 Popof Popof [EMAIL PROTECTED]: Have you tried this patch instead of the Realtek driver ? Did you get the same problems that described ? Yes, re0: MII without any phy! See this PR: http://www.freebsd.org/cgi/query-pr.cgi?pr=123123 -- Regards, Andrey. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Realtek ALC262 and Via ENVY24 sound cards for rel. 6.2
Wed, 12 Dec 2007 18:10:11 -0700, Predrag Punosevac wrote: Lee Shackelford wrote: Good afternoon, FreeBSD enthusiasts. For FreeBSD release 6.2, does anyone know if there is any simpler way of using sound cards containing either a Realtek ALC262 chip or a Via ENVY24 chip than installing the Linux emulator, and then using the alsa a.p.i.? Many thanks. Yours truly, L e e Did you try to compile Open Sound System from ports? I have some Realtek crap and it worked only with OSS. I think that many more devices are supported in 7.0 so you might want to upgrade the system. Check the hardware notes. For the list of supported devices by OSS you can check Open Sound System web-site. They also have a binary package that you can install with pkg_add utility. Package is sometimes updated before the port! oss in ports is not supported envy24 cards, driver in 7,0 base system is works with very low volume. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Open Source softwares in FreeBSD for web hosting platform
Fri, 23 Nov 2007 15:49:19 +0545, Tek Bahadur Limbu wrote: I know that this question has been asked on this list in the past. So I am sorry for repeating it. However, I would like to know the current answers and views on this question. Basically, I want to know which software you might be using as a Site configuration and management application for web hosting services. It will be used primarily to control about 500-1000 virtual domains. I know that there are Cpanel and Plesk which are very good commercial softwares catering the needs for a good web based management tool. So far, I have only tried out RAQdevil http://www.raqdevil.com/ For commercial hostings needs commercial panels. Open source alternatives is very buggy and less functionality. DirectAdmin, ISP Manager commercial panels is not needs many costs for life time licenses or functionality is very good. It seems good but is quite limited in it's features. So I would like to know more open source softwares used for this type of services. Free panels: vhcs, ispconfig. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Good FreeBSD Supported Gigabit Ethernet Card?
Fri, 14 Sep 2007 02:17:47 -0400, Steve Bertrand wrote: I'm looking to eventually upgrade my home network to all gigabit so I'm going to start by purchasing a few NICs for some old servers I just received. I know there are quite a few supported by FreeBSD6 which I found ( http://www.freebsd.org/releases/6.0R/hardware-i386.html#ETHERNET ) but I'm wondering if there is any real benefit in buying a $40 or $50 NIC like the Netgear GA311 or just get a $20 NIC like the D-Link DFE-530TX+. The use will probably be a firewall, proxy, file server, and DVR. http://www.EagleBit.com/Netgear_GA311_Gigabit_PCI_Card_p/eb-400-00357.htm I have a few Netgear GA311's in production, and although I haven't done any benchmarking, I know that they work rock solid operating atop the re driver in my backup infrastructure: backup# uname -a FreeBSD backup 6.2-RELEASE-p2 FreeBSD 6.2-RELEASE-p2 #0: Mon Mar 5 16:57:55 EST 2007 backup# ifconfig re0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 options=1bRXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING I can't speak of D-Link however. Aside from the NIC's, I have found some performance issues with NetGear GigE managed switches though, whereas they seem to slowly loose throughput width after a few months without a reboot. In gigabit networks if_re is not very stable card - needs disabling TXCSUM(ifconfig re0 -txcsum) - it's not great choice. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
sound card ESI MAYA44MK2
Hello! FreeBSD 7.0-CURRENT is supported sound card ESI MAYA44MK2? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Emacs vs XEmacs: which to choose for plain console using?
Wed, 3 Jan 2007 21:41:57 +0200, [EMAIL PROTECTED] wrote: What are advantages and disadvantages of xemacs over emacs? Which to choose for plain console using? Emacs by default is very usable in plain FreeBSD сonsole, also XEmacs is not. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: problem installing one port
Fri, 18 Aug 2006 22:35:35 -0400, Idelfonso Hernandez wrote: #uname -a FreeBSD unixman.home.cu 4.2-RELEASE FreeBSD 4.2-RELEASE #0: Mon Jan 1 13:42:07 CST 1996 [EMAIL PROTECTED]:/usr/src/sys/compile/UNIXMAN i386 my system download the port curl-7.16.4 from http://www.freebsd.org/ports and fail on patch. why? #cd /usr/ports/ftp/curl #make install clean === Extracting for curl-7.15.4 Checksum OK for curl-7.15.4.tar.bz2. === curl-7.15.4 depends on executable: bzip2 - found === Patching for curl-7.15.4 === Applying FreeBSD patches for curl-7.15.4 -e: not found *** Error code 127 You Mk/* in ports tree is outdated. Update this. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Bluetooth adapter on the FreeBSD.
Tue, 18 Jul 2006 08:29:57 -0400, Lowell Gilbert wrote: ~#ngctl types There are 7 total types: Type name Number of living nodes - -- socket 1 btsock_l2c 1 btsock_l2c_raw 1 btsock_hci_raw 1 l2cap 0 hci 0 ubt 1 ~#ngctl status ubt0 ngctl: send msg: No such file or directory Why it's is not work? Do you have *all* of the needed kernel functionality loaded (normally with /etc/rc.bluetooth start dev)? Sorry, my previous kldstat without ng_ubt. Now i'm add: ,[ kldstat ] | Id Refs AddressSize Name | 1 33 0xc040 372db0 kernel | 21 0xc0773000 1df48linux.ko | 32 0xc0791000 187fcmiibus.ko | 41 0xc07aa000 6b40 if_rl.ko | 51 0xc07b1000 146e4agp.ko | 61 0xc07c6000 58a10acpi.ko | 71 0xc081f000 77a4 ng_ubt.ko | 86 0xc0827000 c6b0 netgraph.ko | 94 0xc21ed000 2000 ng_bluetooth.ko | 101 0xc21f8000 c000 ng_hci.ko | 111 0xc2204000 e000 ng_l2cap.ko | 121 0xc2212000 15000ng_btsocket.ko | 131 0xc2227000 4000 ng_socket.ko | 141 0xc2401000 3000 daemon_saver.ko | 151 0xc241b000 23000snd_au8830.ko | 161 0xc244 28000sound.ko ` Problem is steel present: --8---cut here---start-8--- Jul 18 17:38:57 santinel kernel: ng_hci_process_command_timeout: ubt0hci - unabl e to complete HCI command OGF=0x3, OCF=0x1a. Timeout Jul 18 17:38:57 santinel kernel: complete_command: ubt0hci - no pending command, state=0x1 Jul 18 17:38:57 santinel kernel: ubt_request_complete2: ubt0 - Control request f ailed. TIMEOUT (15) Jul 18 17:38:57 santinel kernel: ubt_request_complete2: ubt0 - Control request f ailed. TIMEOUT (15) Jul 18 17:38:57 santinel kernel: ng_hci_process_command_timeout: ubt0hci - unabl e to complete HCI command OGF=0x3, OCF=0x20. Timeout Jul 18 17:38:57 santinel kernel: complete_command: ubt0hci - no pending command, state=0x1 Jul 18 17:38:57 santinel kernel: ubt_request_complete2: ubt0 - Control request f ailed. TIMEOUT (15) Jul 18 17:38:57 santinel kernel: ubt_request_complete2: ubt0 - Control request f ailed. TIMEOUT (15) Jul 18 17:38:57 santinel kernel: ng_hci_process_command_timeout: ubt0hci - unabl e to complete HCI command OGF=0x3, OCF=0x13. Timeout Jul 18 17:38:57 santinel kernel: complete_command: ubt0hci - no pending command, state=0x1 [...] Jul 18 17:49:23 santinel kernel: ng_hci_process_command_timeout: ubt0hci - unabl e to complete HCI command OGF=0x3, OCF=0x3. Timeout Jul 18 17:49:23 santinel root: /etc/rc.d/bluetooth: ERROR: Unable to setup Bluet ooth stack for device ubt0 --8---cut here---end---8--- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Bluetooth adapter on the FreeBSD.
Tue, 18 Jul 2006 08:29:57 -0400, Lowell Gilbert wrote: I have the 100m USB bluetooth adapter. It's adapter is supported by ng_ubt module and not really work. It's the log: --8---cut here---start-8--- ubt0: vendor 0x1131 ISSCBTA, class 224/1, rev 1.10/3.73, addr 3 on uhub0 ubt0: vendor 0x1131 ISSCBTA, rev 1.10/3.73, addr 3 ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2 ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPack etSize=49; nframes=6, buffer size=294 WARNING: attempt to net_add_domain(bluetooth) after domainfinalize() WARNING: attempt to net_add_domain(netgraph) after domainfinalize() ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3 , OCF=0x3. Timeout --8---cut here---end---8--- ~#hccontrol -n ubt0hci initialize hccontrol: Could not find HCI nodes ~#ngctl types There are 7 total types: Type name Number of living nodes - -- socket 1 btsock_l2c 1 btsock_l2c_raw 1 btsock_hci_raw 1 l2cap 0 hci 0 ubt 1 ~#ngctl status ubt0 ngctl: send msg: No such file or directory Why it's is not work? Do you have *all* of the needed kernel functionality loaded (normally with /etc/rc.bluetooth start dev)? Yes, i'm add to boot/loader.conf ng_ubt_load=YES and all needed modules is loaded: ,[ kldstat ] | Id Refs AddressSize Name | 1 33 0xc040 372db0 kernel | 21 0xc0773000 1df48linux.ko | 32 0xc0791000 187fcmiibus.ko | 41 0xc07aa000 6b40 if_rl.ko | 64 0xc07b9000 305d4sound.ko | 72 0xc07ea000 146e4agp.ko | 81 0xc07ff000 58a10acpi.ko | 91 0xc0858000 1fc58radeon.ko | 102 0xc0878000 ec34 drm.ko | 111 0xc220b000 15000ng_btsocket.ko | 121 0xc222b000 a000 netgraph.ko | 131 0xc2224000 2000 ng_bluetooth.ko | 141 0xc276 3000 daemon_saver.ko | 151 0xc2771000 23000snd_au8830.ko ` ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Bluetooth adapter on the FreeBSD.
I have the 100m USB bluetooth adapter. It's adapter is supported by ng_ubt module and not really work. It's the log: --8---cut here---start-8--- ubt0: vendor 0x1131 ISSCBTA, class 224/1, rev 1.10/3.73, addr 3 on uhub0 ubt0: vendor 0x1131 ISSCBTA, rev 1.10/3.73, addr 3 ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2 ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPack etSize=49; nframes=6, buffer size=294 WARNING: attempt to net_add_domain(bluetooth) after domainfinalize() WARNING: attempt to net_add_domain(netgraph) after domainfinalize() ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3 , OCF=0x3. Timeout --8---cut here---end---8--- ~#hccontrol -n ubt0hci initialize hccontrol: Could not find HCI nodes ~#ngctl types There are 7 total types: Type name Number of living nodes - -- socket 1 btsock_l2c 1 btsock_l2c_raw 1 btsock_hci_raw 1 l2cap 0 hci 0 ubt 1 ~#ngctl status ubt0 ngctl: send msg: No such file or directory Why it's is not work? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: portupgrade incompatible version of BDB
Thu, 6 Jul 2006 08:43:05 -0400, Joe Auty wrote: As of the latest portupgrade upgrade I'm getting the following error message when I try to invoke and of the portupgrade scripts: # pkgdb -F /usr/local/lib/ruby/site_ruby/1.8/i386-freebsd5/bdb.so: (NotImplementedError) BDB needs compatible versions of libdb db.h you have db.h version 4.1.25 and libdb version 4.3.29 from /usr/local/lib/ruby/site_ruby/1.8/pkgdb.rb:152:in `set_db_driver' from /usr/local/lib/ruby/site_ruby/1.8/pkgdb.rb:81:in `setup' from /usr/local/lib/ruby/site_ruby/1.8/pkgdb.rb:76:in `initialize' from /usr/local/lib/ruby/site_ruby/1.8/pkgdb.rb:5:in `new' from /usr/local/lib/ruby/1.8/singleton.rb:95:in `instance' from /usr/local/lib/ruby/site_ruby/1.8/pkgtools.rb:206:in `init_pkgtools_global' from /usr/local/lib/ruby/site_ruby/1.8/pkgtools.rb:1155 from /usr/local/sbin/pkgdb:36 I've tried deleting db43, and while this changed the error message, I'm still having problems. Before I start randomly deinstalling and/ or reinstalling anything this, is there a smart way to fix this problem? Solution for fix this error described in ports/UPDATING file. Read this! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
MPx220 and FreeBSD
Hello! I have the Motorola MPx220 windows 2003 SE smartphone. I need soft for upload files to this phone. Please, recommend me it's soft. Thanks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Portupgrade install errors
Fri, 23 Jun 2006 10:59:16 +0200, Andreas Wideroe Andersen wrote: I can't seem to install portupgrade on my system. I'm running 4.7 STABLE (and I can't upgrade until later in July). /usr/ports/sysutils/portupgrade #] make install clean /usr/ports/Mk/bsd.port.mk, line 1618: warning: String comparison operator should be either == or != /usr/ports/Mk/bsd.port.mk, line 1618: Malformed conditional (${OSVERSION} 504105 || (${OSVERSION} = 70 ${OSVERSION} 700012) || (${OSVERSION} = 60 ${OSVERSION} 600104)) /usr/ports/Mk/bsd.port.mk, line 1618: Missing dependency operator /usr/ports/Mk/bsd.port.mk, line 5651: if-less endif /usr/ports/Mk/bsd.port.mk, line 5651: Need an operator make: fatal errors encountered -- cannot continue Any idea? Try this patch: --8---cut here---start-8--- --- bsd.port.mk.origFri Jun 23 12:10:41 2006 +++ bsd.port.mk Fri Jun 23 12:11:30 2006 @@ -1613,11 +1613,7 @@ LDCONFIG32_DIR=libdata/ldconfig32 .if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32) -.if ${OSVERSION} 504105 || \ - (${OSVERSION} = 70 ${OSVERSION} 700012) || \ - (${OSVERSION} = 60 ${OSVERSION} 600104) RUN_DEPENDS+= ${LOCALBASE}/${LDCONFIG_DIR}:${PORTSDIR}/misc/ldconfig_compat -.endif .if defined(USE_LDCONFIG) ${USE_LDCONFIG:L} == yes USE_LDCONFIG= ${PREFIX}/lib .endif --8---cut here---end---8--- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: problems with portupgrade -a
Fri, 23 Jun 2006 13:16:34 -0400, Michael P. Soulier wrote: I'm wondering what this means... [EMAIL PROTECTED] ~]# portupgrade -a [Updating the pkgdb format:bdb1_btree in /var/db/pkg ... - 82 packages found (-0 +55) ... done] ** Package 'libtool' has been removed from ports tree. ** Port directory not found: devel/libtool13 ** Port marked as IGNORE: misc/ldconfig_compat: isn't needed (part of base rc.d) ** Port marked as IGNORE: emulators/linux_base-8: unsupported by upstream, no security support anymore ** Listing the failed packages (*:skipped / !:failed) ! (libtool-1.3.5_2)(port directory error) --- Packages processed: 0 done, 81 ignored, 0 skipped and 1 failed What should I make of this? How do I migrate from something that is apparently unsupported upstream? Read the ports/UPDATING ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Installing FreeBSD 4.9 on a Windows/XP Professional system.
Fri, 23 Jun 2006 15:12:13 -0400, Walt Haynes wrote: Good afternoon. I have a Compaq SR1810NX with a 100GB hard drive split into four equal partitions of 23GB. Two are initialized (one with Windows/XP (C) and the other with a quick format (G)); the file systems are NTFS. The other two partitions (D and E) are uninitialized. I have FreeBSD 4.9 on three CD'S that I'd like to install into one of the uninitialized partitions. FreeBSD ports officialy is unsupported for 4.x and 4.9 is not latest 4.x release. When you installed new system, now RELENG_6_1 is recommended. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: USB mouse not working...
Mon, 19 Jun 2006 10:39:13 +0200, Bak - Bitcare.dk wrote: Hi everybody, I'm having trouble getting my USB mouse to work on my FreeBSD 6.0 It worked fine before on Windows XP and Ubuntu Linux. My laptop is a Fujitsu-Siemens Amilo A7640. The mouse is Microsoft Comfort Optical Mouse 3000. dmesg gives the following results: [...] psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 ppc0: parallel port not found. sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 uhid0: Microsoft Microsoft Optical Mouse with Tilt Wheel, rev 2.00/1.20, addr [...] - As far as I can tell (and I am new to FreeBSD) psm0 is my fingertouch mouse and uhid0 is my USB mouse. Other than that I am clueless as to where I edit the settings to make the USB mouse functional. `kldload ums' and use the ums* devices. -- Regards, Andrey. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: pkgdb problem after portupgrade - operation not permitted
Mon, 19 Jun 2006 14:29:17 +0200, Max Belushkin wrote: I just portupgrade'd portupgrade on a FreeBSD 6.0-RELEASE to portupgrade 2.0.1 (2006/06/18), and right after this pkgdb fails on all operations, i.e.: pkgdb -fu [Rebuilding the pkgdb format:bdb1_btree in /var/db/pkg ... - 63 packages found (-0 +63) Operation not permitted: skipping... . Operation not permitted: skipping... . ... etc. Operation not permitted: Cannot update the pkgdb!] Naturally, portupgrade itself now fails to do anything. I've googled for the Operation not permitted error in pkgdb, but I could not find any useful pointers to the source of the problem. Any help is much appreciated. Now portupgarde is back to stable 2.1.1 version. Update you ports tree. , | Subject: cvs commit: ports/sysutils/portupgrade Makefile distinfo | ports/sysutils/portupgrade/files patch-bin-portsclean patch-bin-portupgrade | patch-lib-pkgdb.rb patch-lib-pkgtools.rb | From: Sergey Matveychuk [EMAIL PROTECTED] | To: [EMAIL PROTECTED], [EMAIL PROTECTED], cvs-all@FreeBSD.org | X-Sent: 11 minutes, 17 seconds ago | | sem 2006-06-19 12:41:58 UTC | | FreeBSD ports repository | | Modified files: | sysutils/portupgrade Makefile distinfo | Added files: | sysutils/portupgrade/files patch-lib-pkgtools.rb | Removed files: | sysutils/portupgrade/files patch-bin-portsclean |patch-bin-portupgrade |patch-lib-pkgdb.rb | Log: | - Roll back to stable 2.1.1 version. | I'd like to wait a repocopy but marcus seems will unaccessible for a week. | | Revision ChangesPath | 1.224 +4 -5 ports/sysutils/portupgrade/Makefile | 1.164 +3 -3 ports/sysutils/portupgrade/distinfo | 1.3 +0 -11 ports/sysutils/portupgrade/files/patch-bin-portsclean (dead) | 1.6 +0 -28 ports/sysutils/portupgrade/files/patch-bin-portupgrade (dead) | 1.2 +0 -25 ports/sysutils/portupgrade/files/patch-lib-pkgdb.rb (dead) | 1.1 +20 -0 ports/sysutils/portupgrade/files/patch-lib-pkgtools.rb (new) ` -- Andrey Slusar ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: pkgdb error
Mon, 19 Jun 2006 18:09:07 -0400, Adam Stroud wrote: I am having a problem with pkgdb and I am wondering if someone can point me in the right direction. I was trying to update some of my out of date ports with portupgrade and when I get a pkgdb error. Now whenever I try to run any portupgrade command, or even and pkgdb command (like pkgdb -Fu) I get the following error message: [Rebuilding the pkgdb format:dbm_hash in /var/db/pkg ... can't convert String into Integer: Cannot update the pkgdb!] Anyone have any ideas or links to some information on how to solve this? I am answered to similar question in this list. Update you ports tree and reinstall portupgrade. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: adjkerntz[]: sysctl(get_offset): No such file or directory
Sun, 18 Jun 2006 08:50:03 -0400, Rod Person wrote: On Sunday 18 June 2006 8:28 am, Rod Person wrote: Machine is an AMD Dual Opteron 246 running FreeBSD 6.1 Stable i386. Sorry, It's FreeBSD 7.0 Current i386 - it's a dual boot and I got confused :) Are you read src/UPDATING? -- Regards, Andrey. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Hardware for FreeBSD6(motherboard for LGA775)
Hi, peoples. I need buy the motherboard for LGA 775 CPU. My choice is ASUS P5RD1-VM(ATI X200 chipset). FreeBSD 6 is fully supported all devices on this motherboard without any problems or not? -- Regards, Andrey. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: compiling ports to packages on fast system, installing on slower one
Fri, 9 Jun 2006 00:39:42 -0500, Nikolas Britton wrote: On 6/8/06, Andrey Slusar [EMAIL PROTECTED] wrote: Wed, 7 Jun 2006 16:56:25 -0400, Dave wrote: Hello, I was wondering if this was possible? I've got a box that i'd like to install the latest gnome 2.14 desktop on, as well as some very intense apps to build. I would like to compile the needed apps on my fastest machine as packages, then transfer all the packages to the slower box, and do a pkg_add * and they're all installed. My catch is i don't want to install everything on my fastest box to pull this off. I am using portupgrade and was wondering if this was doable? On fast box install the misc/tinderbox and build all packets in tinderbox jail. Can you use a custom make.conf for each tinderbox jail? See the rawenv file for customise. -- Andrey Slusar [EMAIL PROTECTED] [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: On mail principles
Thu, 8 Jun 2006 02:08:53 +0300, Giorgos Keramidas wrote: For the rest of the programs, like mail(1), my Sendmail setup sets envelope-from to one of my valid outside-world addresses. This is accomplished with the following in my `sendmail.mc' file: dnl Trusted users, who are allowed to change their envelope-from address dnl without generating a warning in the message header, are listed, one per dnl line, in `sendmail.ct'. define(`confCT_FILE', `-o /etc/mail/sendmail.ct') FEATURE(`use_cw_file')dnl ^^^ Small mistake - FEATURE(`use_ct_file')dnl. -- Regards, Andrey. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: compiling ports to packages on fast system, installing on slower one
Wed, 7 Jun 2006 16:56:25 -0400, Dave wrote: Hello, I was wondering if this was possible? I've got a box that i'd like to install the latest gnome 2.14 desktop on, as well as some very intense apps to build. I would like to compile the needed apps on my fastest machine as packages, then transfer all the packages to the slower box, and do a pkg_add * and they're all installed. My catch is i don't want to install everything on my fastest box to pull this off. I am using portupgrade and was wondering if this was doable? On fast box install the misc/tinderbox and build all packets in tinderbox jail. -- Regards, Andrey. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: MIDI
Wed, 7 Jun 2006 23:06:12 -0700, Gary Kline wrote: Since I have builtin sound on my motherboard on most of my systems, can I configure them to play midi files? So far it looks like I need thw voxware driver/.ko/whatever. I'd appreciate any clues here. You need install the ports/audio/timidity++. -- Regards, Andrey. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: On mail principles
Thu, 8 Jun 2006 02:08:53 +0300, Giorgos Keramidas wrote: [...] I use mutt, which has an option to set the envelope-from address: set envelope_from=yes# set the envelope-from address from From: For the rest of the programs, like mail(1), my Sendmail setup sets envelope-from to one of my valid outside-world addresses. This is accomplished with the following in my `sendmail.mc' file: You need write the howto sendmail for newbies :) -- Regards, Andrey. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: portupgrade question
Wed, 7 Jun 2006 09:38:36 -0400, Michael S wrote: I have a portupgrade related question. I am behind a proxy and fetch doesn't appear to cope with it very well. I installed wget and it works great. I updated the pkgtools.conf to reflect that, however portupgrade insists on using fetch for some reason. At first I thought that portupgrade ignored its configuration file, however once or twice I misstyped something and it did catch it. Any hints? echo 'FETCH_CMD=/etc/fetch_wget' /etc/make.conf ,[ fetch_wget ] | #!/bin/sh | eval url=\${$#} | echo invoked as fetch_cmd $* | wget -c some you proxy options $url ` -- Regards, Andrey. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: AC97 sound card on 6.1
Wed, 07 Jun 2006 12:12:17 -0400, Sean wrote: Gregory Nou wrote: Dave wrote: Hello, I'm atempting to get an integrated AC97 sound card working under 6.1. I know this card works, loading the snd_driver module finds it, but i do not know which actual module works it over. I'd rather not have to load 26 sound modules just the ones i actually need. I've checked /boot/kernel/snd* but didn't find anything AC97 and googling showed that others had asked, but no clear answer. If anyone has this going i'd appreciate hearing about it, and also any difficulties with quality or getting applications going. Thanks. Dave. Hi Dave, Here is my setup. device sound # sound support device snd_ich # AC 97 Support It's not works on the _all_ ac97 sound cards. snd_via8233 and some other modules is support other ac97 cards. Dave, please show pciconf -lv on you system. -- Regards, Andrey. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ECS K7-Terminator and 6.1-STABLE
Hi! I have motherboard SocketA ECS K7-terminator - it's a PCCHIPS M848A V5.0(SIS746FX+SIS963). I need run on this mother 6.1-STABLE system. When is running system, not work PCI devices. When i run system, print message: , | acpi0: AMIINT SIS740XX on motherboard | panic:AcpiOsDerivePciId unable to initialise pci bus ` and reboot. When i'm boot with acpi disable, pciconf -lv and PCI/AGP devices not works(COM-ports too). Many versions bios's i'm probed - official/not official(cheepo), from compatible motherboards - not works. Help me! Maybe upgrade to -CURRENT is fix this problem or not? -- Andrey Slusar [EMAIL PROTECTED] [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]