Re: Aironet 32-bit CardBus Adapter not attached
Hello, To activate Cisco Aironet 1200 32-bit CardBus Adaptor you need to load if_ath driver (Atheros 5212), for this type the command: # kldload if_ath after this you see some messages at the console and network interface ath0 or ath1 into the system, then ifconfig ath0 up and yuor card works. Thanks. Grigory. Grigory Klyuchnikov wrote: Hello, I have Cisco Aironet 32-bit CardBus Adaptor AIR-CB21AG-A-K9. When I attach it to the notebook with FreeBSD 5.4, the following message appears on the console: kernel: cardbus0: network, ethernet at device 0.0 (no driver attached) The kernel config has options: # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus ... # Wireless NIC cards device wlan# 802.11 support device an # Aironet 4500/4800 802.11 wireless NIC device awi # BayStack 660 and others device wi # WaveLAN/Intersil/Symbol 802.11 Does it means, that FreeBSD has not support of Aironet 32-bit cardbus adapter? And what can I resolve the problem? Maybe anyone has any experience with such adapter... Please, tell me any points to docs or some examples... Thanks. PS: But Aironet 16-bit pccard works OK. Regards, Grigory Klyuchnikov, System Engineer, Institute for System Programming Russian Academy of Sciences [EMAIL PROTECTED] -- Grigory Klyuchnikov, System Engineer, Institute for System Programming Russian Academy of Sciences ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Aironet 32-bit CardBus Adapter not attached
Hello, I have Cisco Aironet 32-bit CardBus Adaptor AIR-CB21AG-A-K9. When I attach it to the notebook with FreeBSD 5.4, the following message appears on the console: kernel: cardbus0: network, ethernet at device 0.0 (no driver attached) The kernel config has options: # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus ... # Wireless NIC cards device wlan# 802.11 support device an # Aironet 4500/4800 802.11 wireless NIC device awi # BayStack 660 and others device wi # WaveLAN/Intersil/Symbol 802.11 Does it means, that FreeBSD has not support of Aironet 32-bit cardbus adapter? And what can I resolve the problem? Maybe anyone has any experience with such adapter... Please, tell me any points to docs or some examples... Thanks. PS: But Aironet 16-bit pccard works OK. Regards, Grigory Klyuchnikov, System Engineer, Institute for System Programming Russian Academy of Sciences [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: installation of sendmail milters, security questions
Gary Aitken wrote: Hello all, Searches on freebsd.org, google and sendmail.org didn't really resolve this to my satisfaction; probably my lack of brain cells... Trying to install milter-greylist. After configuring sendmail, and without the milter-greylist daemon running, maillog contains messages of the type: sm-mta[59533]: i9H12H4P059533: Milter (greylist): local socket name /var/milter-greylist/milter-greylist.sock unsafe From what I've been able to dig up, this is because sendmail thinks it's unsafe to read/write that socket. Since milter-greylist was not actually running when I did this, (I hadn't started it manually or configured a script to auto start it) I assumed it had something to do with directory prermissions / ownership. Upon checking, I discovered /var/milter-greylist was owned by smmsp, so I changed it to root. Unfortunately, that didn't solve the problem. I'm at a loss to understand what else is causing sendmail to think that socket is unsafe. Can someone hand me a clue? May be http://www.milter.org/ can help you Best regards, Grigory Klyuchnikov ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Set IPv6 address on the interface
Hello, I'd like to set an IPv6 address to the ethernet interface from a user process, but I don't understand which system call may be used. For getting information about interfaces and addresses there are some methods: ioctl (with SIOCGIFCONF), sysctl (witch NET_RT_IFLIST), AF_ROUTE socket, getifaddrs(). I've tried ioctl() and sysctl() for this purpose. For setting an IPv4 addreess to the interface there is ioctl() with SIOCSIFADDR. How set an IPv6 address? There is SIOCSIFADDR_IN6 for setting address, but it doesen't work as say the comment in in6.c. And there are two commands SIOCDIFADDR_IN6 and SIOCAIFADDR_IN6, delete/add address accordingly, but I've got error: Invalid argument. Or I don't know how use them. My questions: 1) How can I set an IPv6 on the ethernet interface? 2) How can I get IPv6 multicast addresses from each interface? If anyone knows something about, please, give me an answer or reference to it. Best regards, Grigory Klyuchnikov. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Get multicast addresses from interface
Hello,
How can a user process get IPv6 multicast addresses of ethernet
interfaces? I have FreeBSD 5.2.1 and get interface addresses
via ioctl(SIOCGIFCONF) or sysctl(witch NET_RT_IFLIST),
but all returned addresses are unicast.
In net/if.h there is a struct ifma_msghdr:
/*
* Message format for use in obtaining information about multicast addresses
* from the routing socket
*/
struct ifma_msghdr {
u_short ifmam_msglen; /* to skip over non-understood messages */
u_char ifmam_version; /* future binary compatibility */
u_char ifmam_type; /* message type */
int ifmam_addrs;/* like rtm_addrs */
int ifmam_flags;/* value of ifa_flags */
u_short ifmam_index;/* index for associated ifp */
};
How it may be used?
Regards,
Grigory Klyuchnikov.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
