Re: Can't boot 7.2-RELEASE i386 or AMD64 on an Abit KV8 Pro motherboard with Sempron 3100+ CPU
--- On Tue, 6/23/09, ericr erobi...@gmail.com wrote: From: ericr erobi...@gmail.com Subject: Re: Can't boot 7.2-RELEASE i386 or AMD64 on an Abit KV8 Pro motherboard with Sempron 3100+ CPU To: Kent Stewart kstew...@owt.com, freebsd-questions@freebsd.org Date: Tuesday, June 23, 2009, 12:44 PM On Sat, Jun 20, 2009 at 3:10 PM, Kent Stewart kstew...@owt.com wrote: On Saturday 20 June 2009 11:00:45 am ericr wrote: Hi, As the subject says, I can't get the 7.2-RELEASE i386 CD to boot on a system that has: Abit KV8 Pro (K8T800P-8237-6A7L1A1BC-26) motherboard with the most recent BIOS - BIOS release 26 4/20/2007 ( http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA ME=KV8+ProfMTYPE=Socket+754) An AMD Sempron 3100+ 1.8Ghz CPU 1 Gb RAM An ATI 1050 256mb AGP video card I think I have turned off everything ACPI related in the BIOS setup. When I boot the i386 ISO, the kernel boots to the point of probing the PCI bus and then hangs completely, even the keyboard is locked up. I've unplugged all the disks, so the only things in the system are the CD drive, the floppy drive, and the video card. I have turned off acpi at boot time, and when I boot the i386 ISO verbosely, the last few lines the kernel spews are: pci_open(1): mode 1 addr port (0x0cf8) is 0x8000c060 pci_open(1a): mode1res=0x8000 (0x8000) pci_cfgcheck: device 0 [class=06] [hdr=80] is there (id=02821106) pcibios: BIOS version 2.10 pcib0: MPTable Host-PCI bridge pcibus 0 on motherboard pci0: PCI Bus on pcib0 pci0: domain=0, physical bus=0 There's no PCI cards plugged in, just the AGP video card. When I try booting the AMD64 ISO, the boot loader runs, I get the boot menu, and regardless of what boot options I give the kernel, I get the message CPU doesn't support long mode and then I get the OK prompt. I'm pretty sure it doesn't have a h/w problem, it'll boot and install Fedora 11, Win2K, WinXP, and runs every DOS based diagnostic app I can find with no problems. Anyone have any suggestions, or should I file a PR? Did you follow the suggestion on the release announcement of using the other CDs and switching before you start the install. Yes. None of the FreeBSD kernels will boot on this system. Doesn't matter if I use the livefs disk, or the install disk, it only gets as far as described above, then hangs. - ericr I'll risk the flames, and say go back to basics. Make sure of the drive cabling and jumpers. I was reloading a home-grown nas the other day and the cable and jumpers gave me a bugger of a time. 7.2 would start to boot and then just hang. I unplugged everything except the harddrive on the primary and the optical drive on the secondary. After the OS was loaded, I was able move everything where I wanted. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Samba3 domain controller howto?
--- On Sun, 6/7/09, Dave dave.meh...@gmail.com wrote: From: Dave dave.meh...@gmail.com Subject: Samba3 domain controller howto? To: freebsd-questions@freebsd.org Date: Sunday, June 7, 2009, 6:28 AM Hello, I've found a lot of this for LInux, but am looking for something FreeBSD specific. I'm wanting to set up a FreeBSD 7.2 machine, samba3, dynamic dhcp and dns, to act as a domain controller. Has anyone done this and do you have some notes or a howto? Thanks. Dave. The samba howto's on the samba website cover this very well, the only step I can think of that is a bit diff on freebsd, is adding the $ to the machine account but it's stated on the website. Dhcp is covered in the handbook on the freebsd website. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: ISP questions
--- On Thu, 6/4/09, Wojciech Puchar woj...@wojtek.tensor.gdynia.pl wrote: From: Wojciech Puchar woj...@wojtek.tensor.gdynia.pl Subject: Re: ISP questions To: Bill Moran wmo...@potentialtech.com Cc: freebsd-questions@freebsd.org Date: Thursday, June 4, 2009, 12:56 PM 4. What kind of hardware and software are you running? Can't provide this, due to security reasons. That's the stupidest answer I've heard today. It isn't that stupid. As many ISPs admins aren't very good, they simply fear. Yeah, most admins just get to set around and do nothing but answer questions on mailing lists. =) Being short handed, under paid and taking care of the support overflow. The time I get to tell some supposed grad student/software sales person with a sexy voice. We don't share that information makes my day. Just call me paranoid. lol Locked into contracts with software venders will make you answer Info Not Shared. Unable to make changes while you wait for a patch/fix. Your the only one who's found this problem, so we'll wait until the next version to patch this problem. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: What is this forum for?
--- On Thu, 5/28/09, Bill Moran wmo...@potentialtech.com wrote: From: Bill Moran wmo...@potentialtech.com Subject: Re: What is this forum for? To: Wojciech Puchar woj...@wojtek.tensor.gdynia.pl Cc: freebsd-questions@freebsd.org Date: Thursday, May 28, 2009, 4:12 PM In response to Wojciech Puchar woj...@wojtek.tensor.gdynia.pl: This list has been around of a LNG time. The rules haven't changed in the 10 years since I've been subscribed, and the list works 99% of the time. But there are more and more new users. It will not work that way another 10 years. It's funny, that's the same thing that was being said 10 years ago. In the 70s, they claimed that by the year 2000, there would be 3 billion people on earth, and over half of them would be starving because we wouldn't be able to produce enough food. There are now over 6 bil, and the % of starving people is lower than ever. I have a book from the 80s that predicts that we'll run out of oil by the year 2000 and have to find another source to power our cars before then. The book has graphs showing the available reserves and usage and everything. The math all works out. After 30 years of hearing doom and gloom predictions, I can't even take them seriously any more. When the news about swine flue first came out and the experts were predicting how many people would die, I just started laughing out loud. And I'm laughing at you right now. There is more profit in preaching about doom and gloom. Hey, don't worry it'll work out will not get you a multi-million dollar study grant. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Mythtv-0.21 build error
--- On Tue, 3/31/09, Mark Busby redt...@sbcglobal.net wrote: From: Mark Busby redt...@sbcglobal.net Subject: Re: Mythtv-0.21 build error To: help help freebsd-questions@freebsd.org Date: Tuesday, March 31, 2009, 5:42 PM After doing make clean, and restarting the build of mythtv-0.21 port. This is the error on make install snip snip ../../../../../../../local/include/libavcodec/avcodec.h:2363: warning: 'ImgReSampleContext' is deprecated (declared at ../../../../../../../local/include/libavcodec/avcodec.h:2347) audiooutputbase.cpp: In member function 'virtual void AudioOutputBase::Reconfigure(int, int, int, bool, void*)': audiooutputbase.cpp:360: error: 'codec_id_string' was not declared in this scope gmake[2]: *** [audiooutputbase.o] Error 1 gmake[2]: Leaving directory `/usr/ports/multimedia/mythtv/work/mythtv-0.21/libs/libmyth' gmake[1]: *** [sub-libmyth] Error 2 gmake[1]: Leaving directory `/usr/ports/multimedia/mythtv/work/mythtv-0.21/libs' gmake: *** [sub-libs] Error 2 *** Error code 1 Stop in /usr/ports/multimedia/mythtv. *** Error code 1 Stop in /usr/ports/multimedia/mythtv. I was able to build and install Mythtv-0.21 after I did make clean in /usr/ports, then cvsup ports. (undoing a couple of portsnap updates) Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Mythtv-0.21 build error
uname -a FreeBSD muz.sbcglobal.net 7.1-RELEASE FreeBSD 7.1-RELEASE #0: Thu Jan 1 14:37:25 UTC 2009 r...@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 portsnap is up to date. Building myth-0.21 throws this error, creating usr/local creating usr/local/lib creating usr/local/lib/python2.5 creating usr/local/lib/python2.5/site-packages creating usr/local/lib/python2.5/site-packages/MythTV copying build/lib/MythTV/MythLog.py - usr/local/lib/python2.5/site-packages/MythTV copying build/lib/MythTV/MythDB.py - usr/local/lib/python2.5/site-packages/MythTV copying build/lib/MythTV/MythVideo.py - usr/local/lib/python2.5/site-packages/MythTV copying build/lib/MythTV/MythTV.py - usr/local/lib/python2.5/site-packages/MythTV copying build/lib/MythTV/__init__.py - usr/local/lib/python2.5/site-packages/MythTV byte-compiling usr/local/lib/python2.5/site-packages/MythTV/MythLog.py to MythLog.pyc byte-compiling usr/local/lib/python2.5/site-packages/MythTV/MythDB.py to MythDB.pyc byte-compiling usr/local/lib/python2.5/site-packages/MythTV/MythVideo.py to MythVideo.pyc byte-compiling usr/local/lib/python2.5/site-packages/MythTV/MythTV.py to MythTV.pyc byte-compiling usr/local/lib/python2.5/site-packages/MythTV/__init__.py to __init__.pyc running install_egg_info Writing usr/local/lib/python2.5/site-packages/MythTV-0.21-py2.5.egg-info gmake[2]: Leaving directory `/usr/ports/multimedia/mythtv/work/mythtv-0.21/bindings/python' gmake[1]: Leaving directory `/usr/ports/multimedia/mythtv/work/mythtv-0.21/bindings' ( [ -d config ] cd config ; gmake -f Makefile install; ) || true gmake[1]: Entering directory `/usr/ports/multimedia/mythtv/work/mythtv-0.21/config' gmake[1]: `install' is up to date. gmake[1]: Leaving directory `/usr/ports/multimedia/mythtv/work/mythtv-0.21/config' cp: /usr/ports/multimedia/mythtv/work/mythtv-0.21/programs/mythtv-setup/mythtv-setup: No such file or directory *** Error code 1 Stop in /usr/ports/multimedia/mythtv. *** Error code 1 Stop in /usr/ports/multimedia/mythtv. muz# cd /usr/ports/multimedia/mythtv/work/mythtv-0.21/programs/mythtv-setup muz# ls Makefilebackendsettings.o main.cpp backendsettings.cpp checksetup.cpp main.o backendsettings.cpp.origchecksetup.hmythtv-setup.pro backendsettings.h checksetup.osetup.xml muz# Thanks for all your work on this port. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Mythtv-0.21 build error
--- On Tue, 3/31/09, Vasadi I. Claudiu Florin claudiu.vas...@gmail.com wrote: From: Vasadi I. Claudiu Florin claudiu.vas...@gmail.com Subject: Re: Mythtv-0.21 build error To: redt...@sbcglobal.net Date: Tuesday, March 31, 2009, 4:18 PM On Wed, 01 Apr 2009 00:16:26 +0300, Mark Busby redt...@sbcglobal.net wrote: mythtv-setup find / -type f -name mythtv-setup -print does it find any files ? None are found. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Mythtv-0.21 build error
After doing make clean, and restarting the build of mythtv-0.21 port. This is the error on make install l-dtor -D__STDC_CONSTANT_MACROS -DPIC -fPIC -DMMX -Di386 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -DPREFIX=\/usr/local\ -DLIBDIR=\/usr/local/lib\ -DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT -DQT_NO_DEBUG -I/usr/local/share/qt/mkspecs/freebsd-g++ -I. -I../../../../../../../local/include -I../../../../../../../local/include -I../libmyth -I../.. -I.. -I../../../../../../../local/include -I/usr/local/include -o moc_myththemedmenu.o moc_myththemedmenu.cpp /usr/local/bin/moc mythdialogbox.h -o moc_mythdialogbox.cpp g++ -c -pipe -march=pentiumpro -fomit-frame-pointer -O3 -g -Wall -Wno-switch -Wpointer-arith -Wredundant-decls -Wno-non-virtual-dtor -D__STDC_CONSTANT_MACROS -DPIC -fPIC -DMMX -Di386 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -DPREFIX=\/usr/local\ -DLIBDIR=\/usr/local/lib\ -DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT -DQT_NO_DEBUG -I/usr/local/share/qt/mkspecs/freebsd-g++ -I. -I../../../../../../../local/include -I../../../../../../../local/include -I../libmyth -I../.. -I.. -I../../../../../../../local/include -I/usr/local/include -o moc_mythdialogbox.o moc_mythdialogbox.cpp rm -f libmythui-0.21.so.0.21.0 libmythui-0.21.so libmythui-0.21.so.0 libmythui-0.21.so.0.21 g++ -Wl,-rpath,/usr/local/lib -Wl,-rpath,/usr/local/lib -pthread -shared -Wl,-soname,libmythui-0.21.so.0 -o libmythui-0.21.so.0.21.0 mythmainwindow.o mythpainter.o mythimage.o myththemebase.o mythpainter_qt.o xmlparsebase.o mythscreenstack.o mythscreentype.o mythgesture.o mythuitype.o mythuiimage.o mythuitext.o mythuistatetype.o mythlistbutton.o mythfontproperties.o mythuibutton.o myththemedmenu.o mythdialogbox.o mythuiclock.o moc_mythmainwindow.o moc_mythuitype.o moc_mythuibutton.o moc_mythlistbutton.o moc_myththemedmenu.o moc_mythdialogbox.o -L/usr/local/lib -L/usr/local/lib -lqt-mt -lXext -lX11 -lm ln -s libmythui-0.21.so.0.21.0 libmythui-0.21.so ln -s libmythui-0.21.so.0.21.0 libmythui-0.21.so.0 ln -s libmythui-0.21.so.0.21.0 libmythui-0.21.so.0.21 gmake[2]: Leaving directory `/usr/ports/multimedia/mythtv/work/mythtv-0.21/libs/libmythui' cd libmyth qmake libmyth.pro -spec /usr/local/share/qt/mkspecs/freebsd-g++ -o Makefile cd libmyth gmake -f Makefile gmake[2]: Entering directory `/usr/ports/multimedia/mythtv/work/mythtv-0.21/libs/libmyth' g++ -c -pipe -march=pentiumpro -fomit-frame-pointer -O3 -g -Wall -Wno-switch -Wpointer-arith -Wredundant-decls -Wno-non-virtual-dtor -D__STDC_CONSTANT_MACROS -DPIC -fPIC -DMMX -Di386 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -DPREFIX=\/usr/local\ -DLIBDIR=\/usr/local/lib\ -DUSING_OSS -DUSING_X11 -DUSING_XRANDR -DQT_NO_DEBUG -DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT -I/usr/local/share/qt/mkspecs/freebsd-g++ -I. -I../../../../../../../local/include -I../../../../../../../local/include -I../libmythsamplerate -I../libmythsoundtouch -I../libmythfreesurround -I../libavcodec -I../libavutil -I../.. -I.. -I. -I../../../../../../../local/include -I/usr/local/include -o audiooutput.o audiooutput.cpp g++ -c -pipe -march=pentiumpro -fomit-frame-pointer -O3 -g -Wall -Wno-switch -Wpointer-arith -Wredundant-decls -Wno-non-virtual-dtor -D__STDC_CONSTANT_MACROS -DPIC -fPIC -DMMX -Di386 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -DPREFIX=\/usr/local\ -DLIBDIR=\/usr/local/lib\ -DUSING_OSS -DUSING_X11 -DUSING_XRANDR -DQT_NO_DEBUG -DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT -I/usr/local/share/qt/mkspecs/freebsd-g++ -I. -I../../../../../../../local/include -I../../../../../../../local/include -I../libmythsamplerate -I../libmythsoundtouch -I../libmythfreesurround -I../libavcodec -I../libavutil -I../.. -I.. -I. -I../../../../../../../local/include -I/usr/local/include -o audiooutputbase.o audiooutputbase.cpp In file included from audiooutputdigitalencoder.h:5, from audiooutputbase.cpp:19: ../../../../../../../local/include/libavcodec/avcodec.h:2353: warning: 'ImgReSampleContext' is deprecated (declared at ../../../../../../../local/include/libavcodec/avcodec.h:2347) ../../../../../../../local/include/libavcodec/avcodec.h:2363: warning: 'ImgReSampleContext' is deprecated (declared at ../../../../../../../local/include/libavcodec/avcodec.h:2347) audiooutputbase.cpp: In member function 'virtual void AudioOutputBase::Reconfigure(int, int, int, bool, void*)': audiooutputbase.cpp:360: error: 'codec_id_string' was not declared in this scope gmake[2]: *** [audiooutputbase.o] Error 1 gmake[2]: Leaving directory `/usr/ports/multimedia/mythtv/work/mythtv-0.21/libs/libmyth' gmake[1]: *** [sub-libmyth] Error 2 gmake[1]: Leaving directory `/usr/ports/multimedia/mythtv/work/mythtv-0.21/libs' gmake: *** [sub-libs] Error 2 *** Error code 1 Stop in /usr/ports/multimedia/mythtv. *** Error code 1 Stop in /usr/ports/multimedia/mythtv. ___ freebsd-questions@freebsd.org mailing list
Re: Re: Where is the Perl XML::Parser port
I've had good luck using tha cpan script to add perl moduals cpan XML::Parser will add it and the needed moduals check man cpan --- On Mon, 3/30/09, af300...@gmail.com af300...@gmail.com wrote: From: af300...@gmail.com af300...@gmail.com Subject: Re: Re: Where is the Perl XML::Parser port To: Paul B. Mahol one...@gmail.com, af300...@gmail.com, Free BSD Questions list freebsd-questions@freebsd.org Date: Monday, March 30, 2009, 9:14 AM On Mar 29, 2009 4:21pm, Paul B. Mahol one...@gmail.com wrote: On 3/29/09, af300...@gmail.com af300...@gmail.com wrote: Hi, I'm installing the latest gimp and get to a point in the install where it says: checking for perl... /usr/bin/perl checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool So, I've done some searches at freshports.org and I cannot find the XML::Parser perl module anywhere in the ports tree. What is it under? whereis p5-XML-Parser p5-XML-Parser: /usr/ports/textproc/p5-XML-Parser Thanks Andy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: kernel panic
Update of kernel panic. Rebuilt kernel without 80211node, seems to have cured the panics. Removed all wireless support for now. Thanks to Toni Schmidbauer --- On Thu, 1/1/09, Mark Busby redt...@sbcglobal.net wrote: From: Mark Busby redt...@sbcglobal.net Subject: kernel panic To: help help freebsd-questions@freebsd.org Date: Thursday, January 1, 2009, 2:05 PM I've had a few panics. Attached are the output from vmsat -m then -z. uname -a FreeBSD mars.sbcglobal.net 7.0-RELEASE-p5 FreeBSD 7.0-RELEASE-p5 #0: Mon Nov 24 23:03:01 CST 2008 box...@mars.sbcglobal.net:/usr/src/sys/i386/compile/MARS i386 Jan 1 08:56:39 mars savecore: reboot after panic: kmem_malloc(12288): kmem_map too small: 128778240 total allocated Jan 1 08:56:39 mars savecore: writing core to vmcore.2 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
kernel panic
I've had a few panics. Attached are the output from vmsat -m then -z. uname -a FreeBSD mars.sbcglobal.net 7.0-RELEASE-p5 FreeBSD 7.0-RELEASE-p5 #0: Mon Nov 24 23:03:01 CST 2008 box...@mars.sbcglobal.net:/usr/src/sys/i386/compile/MARS i386 Jan 1 08:56:39 mars savecore: reboot after panic: kmem_malloc(12288): kmem_map too small: 128778240 total allocated Jan 1 08:56:39 mars savecore: writing core to vmcore.2 Type InUse MemUse HighUse Requests Size(s) GEOM 22832K - 1206 16,32,64,128,256,512,1024,2048 isadev20 2K - 20 64 CAM dev queue 5 1K -5 64 ata_generic 6 6K -6 1024 ad_driver 5 1K -5 32 ata_dma 4 1K -4 128 cdev21 3K - 21 128 sigio 1 1K -1 32 filedesc9023K - 1606 16,256,512 kenv 113 8K - 115 16,32,64,4096 kqueue 0 0K - 166 128,1024 proc-args39 2K - 7402 16,32,64,128,256 ata_cam 4 4K - 27 64,256,1024 ithread63 6K - 65 16,64,128 acd_driver 1 2K -1 2048 KTRACE 10013K - 100 128 ath_hal 623K -6 128,256,512,1024 linker 106 361K - 520 16,32,64,256,1024,2048,4096 lockf14 1K -12884 64 athdev 337K -3 256 ip6ndp 4 1K -4 64,128 temp20 137K - 6437 16,32,64,128,256,512,1024,2048,4096 devbuf 489 3364K -23810 16,32,64,128,256,512,1024,2048,4096 CAM queue17 1K - 112 16 module 24716K - 273 64,128 mtx_pool 1 4K -1 4096 kbdmux 6 9K -6 16,128,256,2048,4096 subproc 192 371K - 1707 256,4096 proc 2 4K -2 2048 session27 2K - 125 64 pgrp36 3K - 169 64 cred34 9K - 6399 256 uidinfo 4 1K - 101 32,512 plimit20 5K - 1286 256 sysctltmp 0 0K - 284 16,32,64,128 sysctloid 291689K - 3116 16,32,64 sysctl 0 0K - 475 16,32,64 umtx 112 7K - 112 64 p1003.1b 1 1K -1 16 SWAP 2 141K -2 64 bus-sc5828K - 963 16,32,64,128,256,512,1024,2048,4096 bus 80036K - 3148 16,32,64,128,1024 devstat1633K - 16 16,4096 eventhandler65 4K - 65 32,64,128 kobj 148 296K - 225 2048 CAM SIM 5 1K -5 128 rman 16110K - 525 16,32,64 CAM periph 4 1K -9 16,32,128 sbuf 0 0K - 792 16,32,64,128,256,512,1024,2048,4096 CAM XPT4213K - 147 16,32,64,256,512,1024 taskqueue17 2K - 17 16,128 Unitno 7 1K - 13 16,64 iov 0 0K - 561 16,64,128,256 ioctlops 0 0K - 5774 16,32,64,128,256,512,1024 msg 425K -4 1024,4096 sem 4 7K -4 256,1024,4096 shm 112K -1 ttys 1232 175K - 4907 128,1024 ptys 3 1K -3 128 mbuf_tag 5382 169K - 5399 32 scsi_cd 0 0K -5 16 pcb2577K - 195 16,32,64,2048,4096 soname 4 1K - 1753 16,32,128 biobuf1122K - 277 2048 vfscache 1 128K -1 cl_savebuf 0 0K - 1672 32,64 vfs_hash 164K -1 vnodes 1 1K -1 128 vnodemarker 0 0K - 9656 512 mount 139 5K - 325 16,32,64,128,256 BPF 965K - 10 16,64,128,256 ether_multi15 1K - 16 16,32,64 ifaddr 23515K - 235 16,32,64,128,256,512,2048 ifnet 4 4K -4 128,1024 clone 520K -5 4096 arpcom 2 1K -2 16 lo 1 1K -1 16 entropy 102464K - 1024 64 routetbl 15435K - 233 16,32,64,128,256 80211node 8081 21705K - 8081 16,32,512 80211scan 5 3K -5 256,2048 in_multi 2 1K -2 64 IpFw/IpAcct 1
Ath vs Netgear wg311t stuck beacon error
I am having trouble getting a Netgear WG311t card to work, I had tried 7.1beta but kept getting irq interrupt storm no matter what slot or irq was set to the slot/card. Installed 6.3, stuck beacon error. I have tried a, b, and g mode. I have tested the card with other os's to see if was hardware. ifconfig ath0 up ifconfig ath0 inet 10.10.1.14 netmask 255.255.255.0 ssid myap media 11g mediaopt hostap from /var/log/messages Nov 17 21:21:07 wall kernel: ath0: stuck beacon; resetting (bmiss count 4) Nov 17 21:21:25 wall last message repeated 30 times Nov 17 21:21:25 wall syslogd: exiting on signal 15 Nov 17 21:22:18 wall syslogd: kernel boot file is /boot/kernel/kernel Nov 17 21:22:18 wall kernel: ath0: stuck beacon; resetting (bmiss count 4) Nov 17 21:22:18 wall last message repeated 2 times Nov 17 21:22:18 wall kernel: Waiting (max 60 seconds) for system process `vnlru' to stop...done Nov 17 21:22:18 wall kernel: Waiting (max 60 seconds) for system process `bufdaemon' to stop...ath0: stuck beacon; resetting ( Nov 17 21:22:18 wall kernel: done Nov 17 21:22:18 wall kernel: Waiting (max 60 seconds) for system process `syncer' to stop...ath0: stuck beacon; resetting (bmi Nov 17 21:22:18 wall kernel: ath0: stuck beacon; resetting (bmiss count 4) Nov 17 21:22:18 wall kernel: Nov 17 21:22:18 wall kernel: Syncing disks, vnodes remaining...1 ath0: stuck beacon; resetting (bmiss count 4) Nov 17 21:22:18 wall kernel: 1 ath0: stuck beacon; resetting (bmiss count 4) Nov 17 21:22:18 wall kernel: ath0: stuck beacon; resetting (bmiss count 4) Nov 17 21:22:18 wall kernel: 0 ath0: stuck beacon; resetting (bmiss count 4) Nov 17 21:22:18 wall kernel: 0 ath0: stuck beacon; resetting (bmiss count 4) Nov 17 21:22:18 wall kernel: ath0: stuck beacon; resetting (bmiss count 4) wall# vmstat -i interrupt total rate irq1: atkbd0 94 0 irq15: ata1 47 0 irq17: ath0 228298 33 irq20: atapci0 4678 0 irq23: vr0 2338 0 cpu0: timer 13615967 1999 Total 13851422 2034 pciconf -lv [EMAIL PROTECTED]:0:0: class=0x06 card=0x1b451019 chip=0x02041106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'K8M400 CPU to PCI Bridge' class = bridge subclass = HOST-PCI [EMAIL PROTECTED]:0:1:class=0x06 card=0x chip=0x12041106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'K8M400 CPU to PCI Bridge' class = bridge subclass = HOST-PCI [EMAIL PROTECTED]:0:2:class=0x06 card=0x chip=0x22041106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'K8M400 CPU to PCI Bridge' class = bridge subclass = HOST-PCI [EMAIL PROTECTED]:0:3:class=0x06 card=0x chip=0x32041106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies Inc' device = '1394 i2c CPU to PCI Bridge' class = bridge subclass = HOST-PCI [EMAIL PROTECTED]:0:4:class=0x06 card=0x chip=0x42041106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'K8M400 CPU to PCI Bridge' class = bridge subclass = HOST-PCI [EMAIL PROTECTED]:0:7:class=0x06 card=0x chip=0x72041106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'K8M400 CPU to PCI Bridge' class = bridge subclass = HOST-PCI [EMAIL PROTECTED]:1:0: class=0x060400 card=0x chip=0xb1881106 rev=0x00 hdr=0x01 vendor = 'VIA Technologies Inc' device = 'VT8237 K8HTB CPU to AGP 2.0/3.0 Bridge' class = bridge subclass = PCI-PCI [EMAIL PROTECTED]:9:0: class=0x02 card=0x700c1799 chip=0x001a168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'Atheros AR5005G Atheros AR5005G 802.11abg NIC Chipset / TP-Link (TL-WN551G)' class = network subclass = ethernet [EMAIL PROTECTED]:10:0: class=0x02 card=0x05701317 chip=0x09851317 rev=0x11 hdr=0x00 vendor = 'ADMtek Inc' device = 'AN983 FastNIC PCI 10/100 Fast Ethernet Adapter' class = network subclass = ethernet [EMAIL PROTECTED]:15:0: class=0x01018f card=0x1b451019 chip=0x31491106 rev=0x80 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT8237 VT6410 SATA RAID Controller' class = mass storage subclass = ATA [EMAIL PROTECTED]:15:1: class=0x01018a card=0x1b451019 chip=0x05711106 rev=0x06 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82C586A/B/VT82C686/A/B/VT823x/A/C Bus Master IDE Controller' class = mass storage subclass = ATA [EMAIL PROTECTED]:16:0:class=0x0c0300 card=0x1b451019 chip=0x30381106 rev=0x81 hdr=0x00 vendor = 'VIA
open mail relay with ipv6??
Is this an open relay using ipv6? If so how to block the ipv6 relay. I thought after sendmail v8.9, all relay action was blocked by default. maillog entry Nov 10 15:01:11 hostname sm-mta[8989]: mAAL021C008989: from=[EMAIL PROTECTED], size=4825, class=0, nrcpts=0, bodytype=7BIT, proto=ESMTP, daemon=IPv6, relay=localhost [IPv6:::1] Nov 10 15:01:17 hostname sm-mta[8989]: mAAL021D008989: ruleset=check_mail, arg1=[EMAIL PROTECTED], relay=localhost [IPv6:::1], reject=451 4.1.8 Domain of sender address [EMAIL PROTECTED] does not resolve Nov 10 15:01:17 hostname sm-mta[8989]: mAAL021D008989: from=[EMAIL PROTECTED], size=3880, class=0, nrcpts=0, bodytype=7BIT, proto=ESMTP, daemon=IPv6, relay=localhost [IPv6:::1] sockstat -6 USER COMMANDPID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS root sendmail 8284 5 tcp6 *:25 *:* root sshd 1520 3 tcp6 *:5960*:* root ntpd 1010 5 udp6 *:123 *:* root ntpd 1010 9 udp6 fe80:6::1:123 *:* root ntpd 1010 10 udp6 ::1:123 *:* root syslogd927 6 udp6 *:514 *:* ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
passing variable to at command
Is there a way to pass variables to a shell script from the command line with the at command? What I've been trying is something like : at -f '/path/script 20 test' 8:10 091808 : Where 20 and test set variables in the script. I've tried googling the at command for help but there's a lot of at in the world. Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
OT:KVM Switch
Looking at a Trendnet KVM TK-407K switch. It shows to work with linux. Has anyone had success using it with FreeBSD? I hate to waste time and money, even with the option of resale on eslay. Thanks for your time. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: secure access to AS/400 ?
B. Cook [EMAIL PROTECTED] wrote:Hello All, Seems OT, but I have been asked to give someone remote access to an AS/ 400 we have here. As I am not knowledgeable about AS/400's I do not know if there is an openssh/sshd app that could be put on there. They give everyone access 'locally' via telnet and some IBM gui app at the moment; the software: eNetwork Personal Communications AS/400 Client Access Express for Windows Workstation Program Version 4.3 If they can not find some form of sshd to put on the AS/400, I could give people access to a FreeBSD via ssh and then have them use 'something' to connect to it. Is there some terminal emulator that I would have to give them? I don't know how the AS works or what people use on it or use it for.. so please excuse the seemingly ignorant questions.. Thanks in advance ___ Look at http://tn5250.sourceforge.net/, as far as security your going to be disappointed. If your on the same subnet as the as400, a simple telnet session will allow you in the machine with a user name and pass. IBM dropped the ball with this systems security, as you prob know. For years they have toyed with the idea of killing the OS, but keep it alive at the last second. I work with it, but I don't like IBM's idea of security. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD7/xorg/radeon: Section Screen totally ignored
- Original Message From: Zbigniew Baniewski [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, May 13, 2008 7:39:30 AM Subject: Re: FreeBSD7/xorg/radeon: Section Screen totally ignored On Mon, May 12, 2008 at 08:36:03PM -0400, Gary Palmer wrote: What version of xorg are you using on Linux and on FreeBSD? X -version should tell you Linux: X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: UNKNOWN Current Operating System: Linux sarge 2.6.25.2 #1 Fri May 9 14:02:28 CEST 2008 i686 Build Date: 24 January 2008 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present FreeBSD (default X-server shipped with official 7.0): X.Org X Server 1.4.0 Release Date: 5 September 2007 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 7.0-RELEASE i386 Current Operating System: FreeBSD sarge.my.own.domain.no-net 7.0-RELEASE FreeBSD 7.0-RELEASE #2: Sat Apr 19 20:53:27 CEST 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SARGE i386 Build Date: 13 February 2008 05:50:12PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present I might have missed it in an earlier e-mail, but what resolution does FreeBSD come up in? xdpyinfo Highest available: 1280x1024 Under Linux I'm using 800x600 (on the virtual screen 1280x1024) -- pozdrawiam / regards Zbigniew Baniewski I was reading the Xorg section of the handbook the other day and it states. Xorg does not need the configuration file, it should run fine without running Xorg -configuration. Try Xorg -config /etc/X11/xorg.conf to force it to read the your config file. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ipsec-racoon and a cisco pix 515e
Having trouble getting my first connection setup. I am must use the 3des md5 encryption. This is from the error log. : DEBUG: hash validated. : DEBUG: begin. : DEBUG: seen nptype=8(hash) : DEBUG: seen nptype=11(notify) : DEBUG: succeed. : ERROR: unknown notify message, no phase2 handle found. : DEBUG: notification message 14:NO-PROPOSAL-CHOSEN, doi=1 proto_id=3 spi=0fddcb32(size=4). : ERROR: 72.164.229.178 give up to get IPsec-SA due to time up to wait. : DEBUG: an undead schedule has been deleted. : DEBUG: msg 1 not interesting : DEBUG: msg 1 not interesting setkey -D -P 192.168.75.101/0[any] 192.168.1.203/0[any] ip4 in ipsec esp/tunnel/72.164.229.178-75.41.234.82/require created: Apr 8 09:59:05 2008 lastused: Apr 8 09:59:05 2008 lifetime: 0(s) validtime: 0(s) spid=16389 seq=1 pid=896 refcnt=1 192.168.1.203/0[any] 192.168.75.101/0[any] ip4 out ipsec esp/tunnel/75.41.234.82-72.164.229.178/require created: Apr 8 09:59:05 2008 lastused: Apr 8 10:09:04 2008 lifetime: 0(s) validtime: 0(s) spid=16388 seq=0 pid=896 refcnt=1 racoon.conf path pre_shared_key /usr/local/etc/racoon/psk.txt; path certificate @sysconfdir_x@/cert; log debug2; padding { maximum_length 20; # maximum padding length. randomize off; # enable randomize length. strict_check off; # enable strict check. exclusive_tail off; # extract last one octet. } listen { isakmp 75.41.234.82 [500]; } timer { counter 5; # maximum trying count to send. interval 20 sec;# maximum interval to resend. persend 1; # the number of packets per send. phase1 30 sec; phase2 15 sec; } remote 72.164.229.178 { exchange_mode aggressive,main,base; lifetime time 24 hour; proposal { encryption_algorithm 3des; hash_algorithm md5 ; authentication_method pre_shared_key; dh_group 2; } } sainfo anonymous { pfs_group 2; lifetime time 12 hour ; encryption_algorithm 3des ; authentication_algorithm hmac_md5 ; compression_algorithm deflate ; } ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Tyan Motherboard
Looking to build a new server, looking for a dual amd 940 board with sata II support. I have googled, but still looking for a firm success before spending the money. Anyone have success with this Tyan board. Model S2892GNR North Bridge AMD 8131, South Bridge Nvidia nForce Prof. 2200 Other chipset Winbond W83627HF Super I/O ASIC ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
no buffer space
I have a firewall for my pppoe dsl connection that is giving me fits. After a few hours of surfing it runs out of buffer space. I have run memtest on the memory, checked fine. Changed out memory, still locking up. top while out of buffer on ping last pid: 3697; load averages: 0.00, 0.03, 0.03 up 0+17:04:53 07:09:21 47 processes: 1 running, 46 sleeping CPU states: 0.4% user, 0.0% nice, 0.4% system, 0.0% interrupt, 99.2% idle Mem: 49M Active, 138M Inact, 49M Wired, 16K Cache, 47M Buf, 132M Free Swap: 231M Total, 231M Free redtick# ping 75.41.xxx.xx PING 75.41.xxx.xx (75.41.xxx.xx): 56 data bytes ping: sendto: No buffer space available ping: sendto: No buffer space available ping: sendto: No buffer space available ping: sendto: No buffer space available redtick# vmstat -i interrupt total rate irq1: atkbd0 3 0 irq6: fdc0 3 0 irq14: ata0 103048 1 irq15: ata1 23 0 irq21: rl0 187195 3 irq22: dc0 acpi0 11158 0 irq23: ath0 uhci1 4302929 69 cpu0: timer 123030498 2000 Total 127634857 2074 [EMAIL PROTECTED]:0:0: class=0x06 card=0x80251043 chip=0x1a308086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to I/O Bridge' class= bridge subclass = HOST-PCI [EMAIL PROTECTED]:1:0: class=0x060400 card=0x chip=0x1a318086 rev=0x03 hdr=0x01 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to AGP Bridge' class= bridge subclass = PCI-PCI [EMAIL PROTECTED]:30:0:class=0x060400 card=0x chip=0x244e8086 rev=0x12 hdr=0x01 vendor = 'Intel Corporation' device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub Interface to PCI Bridge' class= bridge subclass = PCI-PCI [EMAIL PROTECTED]:31:0:class=0x060100 card=0x chip=0x24408086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = '82801BA (ICH2) LPC Interface Controller' class= bridge subclass = PCI-ISA [EMAIL PROTECTED]:31:1: class=0x010180 card=0x80f0104d chip=0x244b8086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = '82801BA (ICH2) UltraATA/100 IDE Controller' class= mass storage subclass = ATA [EMAIL PROTECTED]:31:2:class=0x0c0300 card=0x80f0104d chip=0x24428086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = '82801BA/BAM (ICH2/ICH2-M) USB Universal Host Controller' class= serial bus subclass = USB [EMAIL PROTECTED]:31:4:class=0x0c0300 card=0x80f0104d chip=0x24448086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = '82801BA/BAM (ICH2/ICH2-M) USB Universal Host Controller' class= serial bus subclass = USB [EMAIL PROTECTED]:31:5:class=0x040100 card=0x80e4104d chip=0x24458086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = '82801BA/BAM (ICH2/ICH2-M) AC'97 Audio Controller' class= multimedia subclass = audio [EMAIL PROTECTED]:0:0: class=0x03 card=0x007210de chip=0x002c10de rev=0x15 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'VANTA / VANTA LT [NVVANTA]' class= display subclass = VGA [EMAIL PROTECTED]:10:0: class=0x02 card=0xf0041385 chip=0x000211ad rev=0x21 hdr=0x00 vendor = 'Lite-On Communications Inc' device = 'NGMC169B 10/100 Ethernet (NetGear FA310TX)' class= network subclass = ethernet [EMAIL PROTECTED]:11:0: class=0x02 card=0x5a001385 chip=0x0013168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'AR5212, AR5213 802.11a/b/g Wireless Adapter' class= network subclass = ethernet [EMAIL PROTECTED]:13:0: class=0x02 card=0x80ea104d chip=0x813910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter' class= network subclass = ethernet [EMAIL PROTECTED]:14:0:class=0x0c0010 card=0x80d2104d chip=0x8020104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = 'TSB12LV26 OHCI-Lynx PCI IEEE 1394 Host Controller' class= serial bus subclass = FireWire dmesg FreeBSD 6.2-RELEASE-p6 #1: Thu Jul 19 08:29:02 CDT 2007 /usr/obj/usr/src/sys/FIRE ACPI APIC Table: ASUS P4B_LX Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1693.73-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf12 Stepping = 2 Features=0x3febfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUS H,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM real memory = 402636800 (383 MB) avail memory = 384520192 (366 MB) ioapic0 Version 2.0 irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: ASUS P4B_LX on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 22 acpi0: Power Button (fixed) Timecounter ACPI-fast frequency
imap errors with vpn connections
I am running Freebsd 6.2-p6 with eGroupWare-1.2.106_1, dovecot-1.0.r2 and mpd-3.18_5. When I connect from home via vpn to the server then try to check mail thru egroupware I get imap authentication errors. Anyone at work checking their mail will also get the same error, kill the vpn connection everything works fine. I would like to be able to work from home and not block others from checking their mail. Below are config files and rule sets I have configured. dovecot.conf nothing changed from default config. ipfw rules allow gre from any to x.x.x.x in recv dc0 allow gre from any to any out xmit dc0 allow ip from any to any via ng0 allow ip from any to any via ng1 allow ip from any to any via ng2 allow ip from any to any via ng3 mpd.conf default: load pptp0 load pptp1 load pptp2 pptp0: new -i ng0 pptp0 pptp0 set iface disable on-demand set iface enable proxy-arp set iface idle 1800 # set bundle disable multilink set link yes acfcomp protocomp set link no pap chap set link enable chap set link keep-alive 10 60 set link mtu 1460 set ipcp yes vjcomp set ipcp ranges 192.168.1.2/32 192.168.1.50/32 set ipcp dns 68.94.156.1 set ipcp nbns 192.168.1.2 set bundle enable compression set ccp yes mppc set ccp yes mpp-e40 set ccp yes mpp-e128 set ccp yes mpp-stateless ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
trouble with php4, apache, egroupware, memory allocation
I'm running apache-1.3.37_4, php4-4.4.7, and eGroupWare-1.2.106_1. Apache error file is returning the following error when trying to access the calendar. PHP Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to allocate 23040 bytes) I've searched but have not found a working fix. Any Ideas?? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
eGroupWare-egw-pear
I notice that the new version of egroupware 1.4.001 requires eGroupWare-egw-pear. Does anyone have a successful install?? I tried an upgrade 1.2.106 but something about php5 was broken, and dropped back to php4. I forget what part of php5 would not build, it was several months ago. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Worldvista-vista
Has anyone been able to run vista or worldvista on freebsd?? www.worldvista.org I have 4 freebsd servers and hate to add a linux to the mix just for this. Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ibm t22 xorg problems
I'm having problems with xorg on an IBM t22 using 6.2 freebsd. The video card shows to be an S3 savage, but the savage driver is broken (blank screen on startx) so I am using the vesa driver. It works fine untill I drop out of X, the screen goes blank, keyboard and mouse become unresponsive. I've done quite a bit of searching but have not found anything to help with the problem. I've enabled the dri option in xorg.conf as some suggest, but it does not help. Any ideas?? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
buildworld fails, 6.1 to 6.2
buildworld fails with this msg c++ -fpic -DPIC -O2 -fno-strict-aliasing -pipe -DIN_GLIBCPP_V3 -DHAVE_CONFIG_H -I/usr/src/gnu/lib/libstdc++ -I/usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++ -I/usr/src/gnu/lib/libstdc++/../../../contrib/gcc -I/usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/include -frandom-seed=RepeatabilityConsideredGood -fno-implicit-templates -ffunction-sections -fdata-sections -Wno-deprecated -c /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/src/locale-inst.cc -o locale-inst.So /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/include/bits/locale_facets.h: In member function `_InIter std::money_get_CharT, _InIter::get(_InIter, _InIter, bool, std::ios_base, std::_Ios_Iostate, long double) const [with _CharT = char, _InIter = std::istreambuf_iteratorchar, std::char_traitschar ]': /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/include/bits/locale_facets.h:4016: internal compiler error: Segmentation fault: 11 Please submit a full bug report, with preprocessed source if appropriate. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 Stop in /usr/src/gnu/lib/libstdc++. *** Error code 1 Stop in /usr/src/gnu/lib. *** Error code 1 motown# uname -a FreeBSD motown.xx.com 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sat Dec 30 22:22:17 CST 2006 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/MOTOWN i386 I've cleaned out /usr/obj as the handbook states and rerun cvsup but still unable to complete a buildworld. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
install fails
I've been trying to install freebsd on a HP pavilion with a A7V-VM Asus motherboard. The bios finds the harddrive and controler, but freebsd does not. I've installed a harddrive with bsd already loaded and the computer runs fine. I've tried older install cd's of freebsd from 4.1 to 6.2rc2 same thing happens. I've changed bios settings, looked for virus blocking software in the bios. I've placed the harddrive into another computer, it works fine. Pulled cards to see if interupt storm. But still unable to load from install cd. Any ideas?? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
discard frame without packet header
I have a headless box that went dead to outside connections and the keyboard was dead. I had to pull the plug to reboot. When it came online, /var/log/message was full of this Dec 17 12:55:29 redtick kernel: ath0: discard frame w/o packet header Dec 17 12:55:30 redtick kernel: dc0: discard frame w/o packet header Dec 17 12:55:30 redtick kernel: ath0: discard frame w/o packet header uname -a 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May 7 04:32:43 UTC 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 pciconf -lv [EMAIL PROTECTED]:8:0: class=0x02 card=0xf0041385 chip=0x000211ad rev=0x21 hdr=0x00 vendor = 'Lite-On Communications Inc' device = 'NGMC169B 10/100 Ethernet (NetGear FA310TX)' class= network subclass = ethernet [EMAIL PROTECTED]:10:0: class=0x02 card=0x5a001385 chip=0x0013168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'AR5212, AR5213 802.11a/b/g Wireless Adapter' class= network subclass = ethernet ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ndis on startup
I've got a encore enlwi-g pci wireless network card that has a marvel chipset that is not supported by the current drivers. The ndis driver will run the card just fine. But if I try to load the ndis driver from loader.conf the card errors out and cannot be recovered until you reboot the computer. Unloading the driver and reloading will not work. Loading the driver after the computer is up seems to be the only option. In the loader.conf I have the following. if_ndis.ko_load=YES ndis.ko_load=YES Mrv8000c_sys.ko_load=YES error msg Oct 23 17:57:51 lame kernel: pci0: network, ethernet at device 11.0 (no driver attached) Oct 23 17:57:51 lame kernel: ndis0: IEEE 802.11g Wireless Cardbus/PCI Adapter mem 0xf401-0xf40 Oct 23 17:57:51 lame kernel: ndis0: NDIS API version: 5.0 Oct 23 17:57:52 lame kernel: ndis0: init handler failed Oct 23 17:57:52 lame kernel: device_attach: ndis0 attach returned 6 Is there a way to script the load on start after everything is running? 6.1-RELEASE i386 FreeBSD 6.1-RELEASE #0: Mon Oct 23 16:34:04 CDT 2006 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
wg311t and via chipset
I've run onto a problem with a netgear wg311t and a msi k8 neo with a via chip. I've placed the card into all the pci slots removed all other pci cards and still it refuses to work for 6.1 bsd or m$. I've placed the card into an older pc and it works for 6.1 bsd with no problems. pciconf -lv shows that the card is not there, it lights one of the tx led in the back but thats the only life it shows in the msi neo. I've searched the netgear site and found an article about needing the via 4-in-1 drivers for the via chip, installed them but no joy even in windows. Are there any hints for the sys.ctl file to aid the use if this card?? Someone else must be running this combo, if so how?? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Office msg system
Looking for suggestions on a web based msg system for an office. People are in and out quite a bit, they need to be able to log in from the road. Prefer email, notes, and maybe bulletin board to notify just a group or everyone in case of a disaster. Ability to link into cell phone text msg system would be nice. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
gmirror dual mirrors?
New to gmirror so a newb question. I have my computer setup with 4 sata drives. I am using one for the operating system then one to mirror it. One has data and I want a mirror of that. When creating the first mirror I used gm0. Now creating the 2nd mirror use gm1? Or is there a gotcha hidden away? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cron job errors
Mark Busby [EMAIL PROTECTED] writes: I getting errors from cron on this job. owner of /usr/libexec/sav-entropy is root:wheel email notice: Subject: Cron [EMAIL PROTECTED] /usr/libexec/save-entropy X-Cron-Env: SHELL=/bin/sh X-Cron-Env: PATH=/etc:/bin:/sbin:/usr/bin:/usr/sbin X-Cron-Env: HOME=/ X-Cron-Env: LOGNAME=operator X-Cron-Env: USER=operator add: not found crontab entry: # Save some entropy so that /dev/random can re-seed on boot. */11* * * * operator /usr/libexec/save-entropy Did you update your system lately? Compare the script to its source: diff -q /usr/src/libexec/save-entropy/save-entropy.sh /usr/libexec/save-entropy Yes I did update to 6.1, running diff on the files shows no problems there. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
cron job errors
I getting errors from cron on this job. owner of /usr/libexec/sav-entropy is root:wheel email notice: Subject: Cron [EMAIL PROTECTED] /usr/libexec/save-entropy X-Cron-Env: SHELL=/bin/sh X-Cron-Env: PATH=/etc:/bin:/sbin:/usr/bin:/usr/sbin X-Cron-Env: HOME=/ X-Cron-Env: LOGNAME=operator X-Cron-Env: USER=operator add: not found crontab entry: # Save some entropy so that /dev/random can re-seed on boot. */11* * * * operator /usr/libexec/save-entropy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
buildworld errors
While upgrading from 6.1 pr1 to 6.1 release, I got this msg 3 days ago, waited, csvup again this morning but still the same error on buildworld. Thanks for the flames! === gnu/usr.bin/cc/cc (all) cc -O2 -fno-strict-aliasing -pipe -DIN_GCC -DHAVE_CONFIG_H -DPREFIX=\/usr\ -I/usr/obj/usr/src/gnu/usr.bin/cc/cc/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc/../../../../contrib/gcc -I/usr/src/gnu/usr.bin/cc/cc/../../../../contrib/gcc/config -DDEFAULT_TARGET_VERSION=\3.4.4\ -DDEFAULT_TARGET_MACHINE=\\ -c /usr/src/gnu/usr.bin/cc/cc/../../../../contrib/gcc/gcc.c /usr/src/gnu/usr.bin/cc/cc/../../../../contrib/gcc/gcc.c: In function `fatal_error': /usr/src/gnu/usr.bin/cc/cc/../../../../contrib/gcc/gcc.c:5974: internal compiler error: in print_reg, at config/i386/i386.c:7116 Please submit a full bug report, with preprocessed source if appropriate. {standard input}: Assembler messages: {standard input}:3778: Warning: end of file not at end of a line; newline inserted {standard input}:4088: Error: unbalanced parenthesis in operand 1. *** Error code 1 Stop in /usr/src/gnu/usr.bin/cc/cc. *** Error code 1 Stop in /usr/src/gnu/usr.bin/cc. *** Error code 1 Stop in /usr/src/gnu/usr.bin. *** Error code 1 Stop in /usr/src/gnu. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
re buildworld errors
-Original Message- From: [EMAIL PROTECTED] [mailto:owner-freebsd- [EMAIL PROTECTED] On Behalf Of Mark Busby Sent: Wednesday, May 17, 2006 2:46 PM To: help help Subject: buildworld errors While upgrading from 6.1 pr1 to 6.1 release, I got this msg 3 days ago, waited, csvup again this morning but still the same error on buildworld. Thanks for the flames! Did you try cd /usr/src make clean make cleanworld And then retry the build? Maybe you have some old cruft hanging around Cleaning the old stuff out changed where the error msg occurs and it errors out sooner lol It's nice not to wait 5 hours before the error msg. = ^ ) gcc version muz# gcc -v Using built-in specs. Configured with: FreeBSD/i386 system compiler Thread model: posix gcc version 3.4.4 [FreeBSD] 20050518 New error msg -DGENERATOR_FILE -I/usr/obj/usr/src/tmp/legacy/usr/include -c /usr/src/gnu/usr.bin/cc/cc_tools/../../../../contrib/gcc/getruntime.c cc -O2 -fno-strict-aliasing -pipe -I. -DIN_GCC -DHAVE_CONFIG_H -DPREFIX=\/usr/obj/usr/src/tmp/usr\ -I/usr/obj/usr/src/tmp/usr/src/gnu/usr.bin/cc/cc_tools/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_tools/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_tools/../../../../contrib/gcc -I/usr/src/gnu/usr.bin/cc/cc_tools/../../../../contrib/gcc/config -DGENERATOR_FILE -I/usr/obj/usr/src/tmp/legacy/usr/include -c /usr/src/gnu/usr.bin/cc/cc_tools/../../../../contrib/gcc/hashtab.c /usr/src/gnu/usr.bin/cc/cc_tools/../../../../contrib/gcc/hashtab.c: In function `htab_elements': /usr/src/gnu/usr.bin/cc/cc_tools/../../../../contrib/gcc/hashtab.c:663: internal compiler error: in print_reg, at config/i386/i386.c:7116 Please submit a full bug report, with preprocessed source if appropriate. See URL:http://gcc.gnu.org/bugs.html for instructions. {standard input}: Assembler messages: {standard input}:0: Warning: end of file not at end of a line; newline inserted {standard input}:1046: Error: unbalanced parenthesis in operand 1. *** Error code 1 Stop in /usr/src/gnu/usr.bin/cc/cc_tools. *** Error code 1 Stop in /usr/src/gnu/usr.bin/cc. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
interrupt storm
Checking /var/log/messages after loading snd_emu10k1, I see the following. muz kernel: pcm1: Creative EMU10K1 port 0xd800-0xd81f irq 4 at device 9.0 on pci0 muz kernel: Interrupt storm detected on irq4: atapci0; throttling interrupt source muz kernel: pcm1: SigmaTel STAC9708/11 AC97 Codec muz kernel: emujoy0: detached Upon. muz# vmstat -i interrupt total rate irq0: clk 933473998 irq4: pcm0 atapci0 1213 1 irq7: ppc0 1 0 irq8: rtc 119494127 irq11: dc0 1001 1 irq13: npx01 0 irq14: ata0 46 0 Total1055229 1128 ### muz# pciconf -lv [EMAIL PROTECTED]:0:0: class=0x06 card=0x154110b9 chip=0x154110b9 rev=0x04 hdr=0x00 vendor = 'Acer Labs Incorporated (ALi)' device = 'ALI M1541 Aladdin V/V+ AGP System Controller' class= bridge subclass = HOST-PCI [EMAIL PROTECTED]:1:0: class=0x060400 card=0x00e0 chip=0x524310b9 rev=0x04 hdr=0x01 vendor = 'Acer Labs Incorporated (ALi)' device = 'ALI M1541 PCI to AGP Bridge' class= bridge subclass = PCI-PCI [EMAIL PROTECTED]:2:0: class=0x0c0310 card=0x chip=0x523710b9 rev=0x03 hdr=0x00 vendor = 'Acer Labs Incorporated (ALi)' device = 'M5237 OpenHCI 1.1 USB Controller' class= serial bus subclass = USB [EMAIL PROTECTED]:3:0: class=0x068000 card=0x710110b9 chip=0x710110b9 rev=0x00 hdr=0x00 vendor = 'Acer Labs Incorporated (ALi)' device = 'ALI M7101 Power Management Controller' class= bridge [EMAIL PROTECTED]:7:0: class=0x060100 card=0x chip=0x153310b9 rev=0xc3 hdr=0x00 vendor = 'Acer Labs Incorporated (ALi)' device = 'ALI M1533 Aladdin IV ISA Bridge' class= bridge subclass = PCI-ISA [EMAIL PROTECTED]:9:0: class=0x040100 card=0x100a1102 chip=0x00021102 rev=0x0a hdr=0x00 vendor = 'Creative Labs' device = 'EMU1 Sound Blaster Live! (Also Live! 5.1) - OEM from DELL - CT4780' class= multimedia subclass = audio [EMAIL PROTECTED]:9:1: class=0x098000 card=0x00201102 chip=0x70021102 rev=0x0a hdr=0x00 vendor = 'Creative Labs' device = 'EMU1 Game Port' class= input device [EMAIL PROTECTED]:10:0:class=0x03 card=0x chip=0x88115333 rev=0x44 hdr=0x00 vendor = 'S3 Graphics Co., Ltd.' device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01' class= display subclass = VGA [EMAIL PROTECTED]:12:0: class=0x02 card=0xf0041385 chip=0x000211ad rev=0x21 hdr=0x00 vendor = 'Lite-On Communications Inc' device = 'NGMC169B 10/100 Ethernet (NetGear FA310TX)' class= network subclass = ethernet [EMAIL PROTECTED]:13:0: class=0x018000 card=0x4d33105a chip=0x4d30105a rev=0x02 hdr=0x00 vendor = 'Promise Technology Inc' device = 'PDC20267 FastTrack100 EIDE Controller' class= mass storage [EMAIL PROTECTED]:15:0: class=0x01018a card=0x chip=0x522910b9 rev=0xc1 hdr=0x00 vendor = 'Acer Labs Incorporated (ALi)' device = 'M1543 Southbridge EIDE Controller' class= mass storage subclass = ATA I have added to /boot/device.hints the following lines to try to force pcm to another IRQ but no joy hint.pcm.0.at=isa hint.pcm.0.irq=5 hint.pcm.0.drq=1 hint.pcm.0.flags=0x0 Is there a way to move the sound to another irq? or the atapci? and HOW? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
dual bge nics slow transfer - no transfer
I have a tyan k8wd with dual bge nics but they are painfully slow on transfer rates. Is there something I need to put in the hints file to fix this?? Thanks! dmesg output Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #1: Tue Mar 14 05:43:23 CST 2006 [EMAIL PROTECTED]:/usr/src/sys/amd64/compile/QUAD Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Dual Core AMD Opteron(tm) Processor 270 (1989.05-MHz K8-class CPU) Origin = AuthenticAMD Id = 0x20f12 Stepping = 2 Features=0x178bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SS Features2=0x1SSE3 AMD Features=0xe2500800SYSCALL,NX,MMX+,b25,LM,3DNow+,3DNow Hyperthreading: 2 logical CPUs real memory = 4227792896 (4031 MB) avail memory = 4083822592 (3894 MB) ACPI APIC Table: A M I OEMAPIC FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 Version 1.1 irqs 0-23 on motherboard ioapic1 Version 1.1 irqs 24-27 on motherboard ioapic2 Version 1.1 irqs 28-31 on motherboard acpi0: A M I OEMRSDT on motherboard acpi0: Power Button (fixed) pci_link0: ACPI PCI Link LNKA irq 5 on acpi0 pci_link1: ACPI PCI Link LNKB irq 9 on acpi0 pci_link2: ACPI PCI Link LNKC irq 11 on acpi0 pci_link3: ACPI PCI Link LNKD irq 10 on acpi0 Timecounter ACPI-safe frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0 cpu0: ACPI CPU on acpi0 acpi_throttle0: ACPI CPU Throttling on cpu0 cpu1: ACPI CPU on acpi0 cpu2: ACPI CPU on acpi0 cpu3: ACPI CPU on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pcib1: ACPI PCI-PCI bridge at device 6.0 on pci0 pci3: ACPI PCI bus on pcib1 ohci0: OHCI (generic) USB controller mem 0xfeafc000-0xfeafcfff irq 19 at device 0.0 on pci3 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: OHCI (generic) USB controller on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: OHCI (generic) USB controller mem 0xfeafd000-0xfeafdfff irq 19 at device 0.1 on pci3 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: OHCI (generic) USB controller on ohci1 usb1: USB revision 1.0 uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered atapci0: SiI 3114 SATA150 controller port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xac00-0xac03,0xa880-0xa88f ata2: ATA channel 0 on atapci0 ata3: ATA channel 1 on atapci0 ata4: ATA channel 2 on atapci0 ata5: ATA channel 3 on atapci0 pci3: display, VGA at device 6.0 (no driver attached) fxp0: Intel 82551 Pro/100 Ethernet port 0xa800-0xa83f mem 0xfeafb000-0xfeafbfff,0xfeaa-0xfeab irq 18 at miibus0: MII bus on fxp0 inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:e0:81:41:62:0d isab0: PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci1: AMD 8111 UDMA133 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pc ata0: ATA channel 0 on atapci1 ata1: ATA channel 1 on atapci1 pci0: serial bus, SMBus at device 7.2 (no driver attached) pci0: bridge at device 7.3 (no driver attached) pcib2: ACPI PCI-PCI bridge at device 10.0 on pci0 pci2: ACPI PCI bus on pcib2 bge0: Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003 mem 0xfc80-0xfc80,0xfc8f-0xfc8f miibus1: MII bus on bge0 brgphy0: BCM5704 10/100/1000baseTX PHY on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:e0:81:41:62:4c bge1: Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003 mem 0xfc83-0xfc83,0xfc82-0xfc82 miibus2: MII bus on bge1 brgphy1: BCM5704 10/100/1000baseTX PHY on miibus2 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:e0:81:41:62:4d pci0: base peripheral, interrupt controller at device 10.1 (no driver attached) pcib3: ACPI PCI-PCI bridge at device 11.0 on pci0 pci1: ACPI PCI bus on pcib3 pci0: base peripheral, interrupt controller at device 11.1 (no driver attached) acpi_button0: Power Button on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: 16550A-compatible COM port port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: 16550A-compatible COM port port 0x2f8-0x2ff irq 3 on acpi0 sio1:
fetch ports and /stand/sysinstall
I have several freebsd boxes on 2 different connections, each one is sitting at or about this date. uname -a 6.0-STABLE FreeBSD 6.0-STABLE #2: Mon Jan 9 15:05:38 CST 2006 While trying to add ports or pkgs I get connection refused errors. Also when using /stand/sysinstall I get, can't find the 6.0-STABLE. I then change to any in options, I get not found on this server try another. Other servers give the same msg. Google has not been my friend on this problem. I have been using freebsd from 4.0, so I have installed a few pkgs, but never had this much pain. Is there a policy change on dynamic ip connections? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Time warp
One of my boxes took a trip of sorts. From auth.log, Dec 17 07:57:32 redtick sshd[56969]: Dec 17 11:47:43 redtick sshd[57596]: Dec 18 15:45:20 redtick sshd[61804]: Dec 18 17:00:00 redtick sshd[62099]: Dec 18 21:18:52 redtick sshd[62776]: Dec 18 21:19:18 redtick sshd[62779]: Dec 19 04:16:13 redtick sshd[64163]: Dec 20 10:49:19 redtick sshd[68705]: Dec 21 02:03:23 redtick sshd[71045]: Dec 22 06:34:26 redtick sshd[75435]: Dec 22 16:18:17 redtick sshd[76898]: Dec 23 08:21:56 redtick sshd[79415]: Dec 17 21:21:54 redtick sshd[360]: . Dec 17 21:21:54 redtick sshd[360]: . Dec 17 21:23:01 redtick sshd[519]: A reboot reset the time. chkrootkit returns nothing found. Now some things are not working right because of this, but the main one is ddclient. Where does ddclient store the time info? A reinstall of ddclient did not clear the time problem. Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
calendar scheduler
I've been searching for a web-based calendar, scheduler and message board for a small network of 15 employees. I saw one about a year ago that used bsd-apache-php and any browser could access it, but I've been unable to find it now. Any suggestions to fill the need? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
re: ATI RAGE Mobility
On Monday 28 March 2005 20:25, Edwin Mons wrote: On Mon, 28 Mar 2005 20:20:50 +0200, Edwin Mons wrote: I'm trying to enable DRI on my IBM ThinkPad A20m, which has an ATI Rage Mobility P/M AGP 2x rev 100 GPU onboard. I succesfully installed the mach64 DRM module, which shows the following lines in my dmesg: drm0: Rage Mobility P/M AGP 2X port 0x2000-0x20ff mem 0xf420-0xf4200fff,0xf500-0xf5ff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xf800 64MB info: [drm] Initialized mach64 1.0.0 20020904 on minor 0 However, when I start X.org 6.8.2, it doesn't show anything about DRM in the logfiles (attached). glxinfo reports it doesn't use Direct Rendering as well. Attached is my xorg.conf, as well. My questions: 1) does anybody know if it is possible to have DRI on this configuration at all, and 2) how does one get it to work? from kernel LINT file # DRM options: # mgadrm:AGP Matrox G200, G400, G450, G550 # tdfxdrm: 3dfx Voodoo 3/4/5 and Banshee # r128drm: ATI Rage 128 # radeondrm: ATI Radeon up to 9000/9100 # DRM_DEBUG: include debug printfs, very slow # # mga requires AGP in the kernel, and it is recommended # for AGP r128 and radeon cards. device mgadrm device r128drm device radeondrm device tdfxdrm options DRM_DEBUG You may need to add the device mgadrm Hope it helps. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
re: What is best: NFS or Samba? was:NFS Mounting,
On 2005-01-25 Kris Kennaway wrote: I'm trying to mount from a freeSBIE system (freeBSD 5.3) to my freeBSD server (5.1) when I get the errormessage: RPCPROG_MNT: RPC: +Authentication error; why = Client credential too weak. What can I do? Try to mount as root, not a nonprivileged user. I'm doing that now. I also found out that I cant mount into a directory, only directly to a mount point. Something that was very clearly +described in the handbook. However, I have a samba share on the same server, it's sharing exactly the directory I want to have access to from my freeBSD client. Is it a +better way to go via SAMBA then, compared to share everything? Are there any other ways to solve this? I fought this also and found this to help. edit the lines in /etc/hosts.allow to match your needs. # Rpcbind is used for all RPC services; protect your NFS! # (IP addresses rather than hostnames *MUST* be used here) rpcbind : 192.168.1.2/255.255.255.0 : allow rpcbind : 192.168.2.53/255.255.255.0 : allow rpcbind : ALL : ALL ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]