Re: Backup question
hi there ara many ways: - tar to dvd +/- rw - tar and scp to another unix server - tar and smbclient to another windows server - tar and mail regards michael Karen Donathan wrote: Hello. What is the best way to back up the html directory? We do not have a tape drive. Is there a way to have an automated .tar file created and sent as email so I could save it on another server? Any help would be great! Thanks Karen Donathan George Washington High School Charleston, WV ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD ISDN Modem Support
hi does freebsd support this isdn-modem? ELSA MicroLink ISDN/TLV34 is there a compatible page for isdn modems? thank´s ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: can ´t mount dvd
sorry, you are right thank´s Jeremy Faulkner wrote: Michael Hollmann wrote: hi dmesg | more acd1: DVD-R PIONEER DVD RW DVR-107D at ata1-master PIO4 Wow, you don't have much in your dmesg. Or you didn't actually type that command. cat /etc/fstab /dev/acd1c /tmp/dvdcd9660 ro,noauto 0 0 Same as above. mdir /mnt/dvd cd /dev sh MAKEDEV acd1 I assume this is on 4.x since you didn't supply the output of uname -a mount /mnt/dvd According to the above /etc/fstab you don't have a /mnt/dvd entry. or mount /dev/acd1c /mnt/dvd mount -t cd9660 /dev/acd1 /mnt/dvd give this error: mount: /mnt/dvd: unknown special file or file system The disk doesn't have a UFS file system on it (the default when using mount). why ??? Because. any ideas ? Some. thank´s michael You're welcome. -- Mit freundlichen Grüßen Michael Hollmann JAWA Management Software GmbH A-8041 Graz, Liebenauer Hauptstraße 200 Tel: ++43 (0)316 403274-13 Fax: ++43 (0)316 403274-10 GSM: ++43 (0)676 4101431 E-Mail: [EMAIL PROTECTED] Web: http://www.jawa.at/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
can ´t mount dvd
hi dmesg | more acd1: DVD-R PIONEER DVD RW DVR-107D at ata1-master PIO4 cat /etc/fstab /dev/acd1c /tmp/dvdcd9660 ro,noauto 0 0 mdir /mnt/dvd cd /dev sh MAKEDEV acd1 mount /mnt/dvd or mount /dev/acd1c /mnt/dvd give this error: mount: /mnt/dvd: unknown special file or file system why ??? any ideas ? thank´s michael ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
amanda question
hello everybody, sendbackup[20339]: index tee cannot write [Broken pipe] any experience ??? thanks michael ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: upgrade kde
thank´s, portupgrade -P kde that´s all what i need? is there anything else to do? regards michael Frank Mueller schrieb: Take a look at http://freebsd.kde.org There you'll find all information you need. Frank thank´s a lot, but this takes to long, or not? is there another way without a clean install? thank´s michael Chuck McManis schrieb: I found the easiest way was to start with a clean install, then install cvsup, then cvsup ports, then install portupgrade and then build kde from the ports tree. Took about 32 hours start to finish on a 2.2Ghz Celeron. I wasted about a week trying to do it without re-installing and was unsuccessful. --Chuck At 11:34 PM 3/9/2004, Michael Hollmann wrote: how can i easy upgrade the kde version? my actually version is 3.1.x and would like to upgrade to 3.2 should i use portupgrade? is there a howto for it? thank´s for your help regards michael ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
upgrade kde
how can i easy upgrade the kde version? my actually version is 3.1.x and would like to upgrade to 3.2 should i use portupgrade? is there a howto for it? thank´s for your help regards michael ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: upgrade kde
thank´s a lot, but this takes to long, or not? is there another way without a clean install? thank´s michael Chuck McManis schrieb: I found the easiest way was to start with a clean install, then install cvsup, then cvsup ports, then install portupgrade and then build kde from the ports tree. Took about 32 hours start to finish on a 2.2Ghz Celeron. I wasted about a week trying to do it without re-installing and was unsuccessful. --Chuck At 11:34 PM 3/9/2004, Michael Hollmann wrote: how can i easy upgrade the kde version? my actually version is 3.1.x and would like to upgrade to 3.2 should i use portupgrade? is there a howto for it? thank´s for your help regards michael ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Nvidia
download the latest nvidia treiber for freebsd from http://www.nvidia.com and read the README. regards michael how install nvidia drivers in freebsd 5.2? Tanks Eduardo Fernandes ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: KDE Access
hi have you done echo exec startkde /home/homedirectory/.xinitrc after this you can start your kde with startx regards michael [EMAIL PROTECTED] schrieb: Hi, I am new to BSD and have installed everything, I think, and am trying to get into KDE. When I type:startkde I get the message: cannot connect to X server When I type: kcontrol I get the message: can't determine display Have I left something undone? How do I get into KDE? Thanks, Jerry ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Mit freundlichen Grüßen Michael Hollmann JAWA Management Software GmbH A-8041 Graz, Liebenauer Hauptstraße 200 Tel: ++43 (0)316 403274-13 Fax: ++43 (0)316 403274-10 GSM: ++43 (0)676 4101431 E-Mail: [EMAIL PROTECTED] Web: http://www.jawa.at/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: touchpad mouse not working with freebsd
hi try insert into /boot/device.hints: hint.psm.0.flags=0x1000 that works fine for on my toshiba satellite 1100-z20 regards michael Francesco Casadei schrieb: Peter Kurpis wrote: I installed FreeBSD 4.7 on my Toshiba Satellite 1135 laptop, and I couldn't get the mouse working. (Windows says it's an Alps Pointing Device, on interrupt 12, plugged into the PS/2 port.) On further investigation, when I tried moused -p /dev/psm0 -i all the daemon aborted, saying it failed to open /dev/psm0 (which does exist and looks sane) and also Device not configured What does Device not configured mean? I see psm listed in the GENERIC kernel configuration file... What gives? What do I need to do to get it working? P.S. Device not configured was error 6 in errno, according to truss. P.P.S. The same as above goes for the other two mouse devices (mse0 and ums0) for what it's worth... Please CC me on reply, as I am not a member of this group. Thanks! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] From psm(4) manpage, Driver Flags section: [...] bit 12 IGNOREPORTERROR This flag makes psm driver ignore certain error conditions when probing the PS/2 mouse port. It should never be necessary under normal circumstances. [...] So, try to put the following line into /boot/device.hints: hint.psm.0.flags=0x1000 Francesco Casadei ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to [EMAIL PROTECTED] -- Mit freundlichen Grüßen Michael Hollmann JAWA Management Software GmbH A-8041 Graz, Liebenauer Hauptstraße 200 Tel: ++43 (0)316 403274-13 Fax: ++43 (0)316 403274-10 GSM: ++43 (0)676 4101431 E-Mail: [EMAIL PROTECTED] Web: http://www.jawa.at/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
wlan card cardbus activation failed
hi i am running FreeBSD 5.2 Release #0 on my laptop. my wlan card is netgear WG512 Cardbus 32bit. i have no troubles to run this card under windows 2000 prof. but on FreeBSD 5.2 i get cardbus activation failed. should this be fixed now ??? any ideas? thank´s michael ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
can´t set default router in rc.conf FreeBSD 5.2
i tried to set the default router in /etc/rc.conf: defaultrouter=192.168.xxx.xxx but this doesn´t work. why. it does only work after following command: route add default 192.168.xxx.xxx could anybody help me? please thank´s michael ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: NAT and DHCP
hello, add following to: /etc/rc.conf firewall_type=open firewall_enable=YES firewall_quiet=NO natd_enable=YES natd_flags=-f /etc/natd.conf natd_interface=rl0 gateway_enable=YES /etc/natd.conf -- use_sockets yes Kernelkonfiguration /usr/src/sys/i386/conf/ cp GENERIC FIREWALL vi FIREWALL // add this to your kernel options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_FORWARD options IPDIVERT options DUMMYNET options PMAP_SHPGPERPROC=300 config FIREWALL cd ../../compile/FIREWALL make depend make make install // oder make depend make make install i hope that´s what you are looking for. greetings michael Stanley Chan schrieb: Dear friends, I am running my servers with FreeBSD 4.8 Release and I am planning to use the NAT and DHCP functions to let my local area network machines to access the internet. Could you tell me where can I find these information's and documents as I could you quite understand the materials on the handbook. The examples on the handbook are not adequate. Thanks very much for your assistance. Yours sincerely, Stanley ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Mit freundlichen Grüßen Michael Hollmann JAWA Management Software GmbH A-8041 Graz, Liebenauer Hauptstraße 200 Tel: ++43 (0)316 403274-13 Fax: ++43 (0)316 403274-10 GSM: ++43 (0)676 4101431 E-Mail: [EMAIL PROTECTED] Web: http://www.jawa.at/ News: http://www.jawa.at/news.php/ Web-Framework für B2B-Applikationen ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
mount Siemens m55
i would like to mount my siemens m55. it would be identified as ugen0: Prolific Technology PL2303 Serial adapter (ATEN/IOGEAR UC232A), rev 1.10/2.02, addr 2 i allways get: /dev/ugen0.2: Block device required what is the problem? i also tried to fix it in /usr/src/sys/dev/usb/umass.c but it will not work! -- Mit freundlichen Grüßen Michael Hollmann JAWA Management Software GmbH A-8041 Graz, Liebenauer Hauptstraße 200 Tel: ++43 (0)316 403274-13 Fax: ++43 (0)316 403274-10 GSM: ++43 (0)676 4101431 E-Mail: [EMAIL PROTECTED] Web: http://www.jawa.at/ News: http://www.jawa.at/news.php Web-Framework für B2B-Applikationen ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
troubles with my nvidia card after update
my problem is (after upgrade kernel from 4.8.RC1 to 4.9.RELEASE): can´t shutdown my kde 3.1.xx: (EE) NVIDIA(0): Failed to destroy the primary surface i have allready insatlled and reinstalled the newest NVIDIA-Driver for FreeBSD. my graficcard is MSI GeForce4 Ti4200 64MB. i know, that´s not the best choice for freebsd but i needed it for windows. please, could anybody help me? thanks, michael ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]