Did Freebsd 7.4 supports HMAC-SHA-256-128
Hi, Following interoperability is failing:- IPv6 Ready Logo, Phase-2 Interoperability Test Scenario Ipsec -Test cases 5.2.12 is failing with FreeBSD. Observation:-Freebsd 7.4 uses HMAC-SHA-256-96 Algorithm and SGW1 are using HMAC-SHA-256-128 Algorithm due to this interoperability is failing. Did Freebsd 7.4 supports HMAC-SHA-256-128 ? Purpose: Interoperability:-Tunnel mode between two SGWs, ESP=3DES-CBC HMAC-SHA-256 Setup:- H1---net0---SGW1---net1--Router---net2---SGW2(freebsd)---net3---H2 Net0 (2001::/64) Net1 (2004::/64) Net2 (2002::/64) Net3 (2003::/64) Please find the attached zip folder. Regards, Rohit ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
FW: 5.2.11. Tunnel Mode Fragmentation.zip
Hi, Trying to execute IPv6 Ready Logo Phase-2 Interoperability Test Scenario Ipsec test cases 5.2.11 Issue:- FreeBSD 7.4 not sending icmpv6 too big message Please check the updated setup pcap. Regards, Rohit ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
FW: Interoperability:-Tunnel mode between two SGWs, ESP=3DES-CBC HMAC-SHA-256
Hi, Following interoperability is failing:- IPv6 Ready Logo, Phase-2 Interoperability Test Scenario Ipsec -Test cases 5.2.12 is failing with FreeBSD. Observation:-Freebsd 7.4 uses HMAC-SHA-256-96 Algorithm and SGW1 are using HMAC-SHA-256-128 Algorithm due to this interoperability is failing. Did Freebsd 7.4 supports HMAC-SHA-256-128 ? Purpose: Interoperability:-Tunnel mode between two SGWs, ESP=3DES-CBC HMAC-SHA-256 Setup:- H1---net0---SGW1---net1--Router---net2---SGW2(freebsd)---net3---H2 Net0 (2001::/64) Net1 (2004::/64) Net2 (2002::/64) Net3 (2003::/64) Please find the attached zip folder. Regards, Rohit ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
FreeBsd
Hello, I ma doing project in FreeBsd.but i m new about FreeeBsd I don't know anything about this operating system.my project is porting NCTUns 6.0 on freeBsd...so will you give me idea that how to start this project.?? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Double Layer dvd burning in FreeBSD
Hi, I have read the manuals and have successfully burnt several DVDs before. I did nothing different when trying to burn dl DVD and it just has not been successful. Below is the error message I recieve from growisofs: Executing 'builtin_dd if=DVD.iso of=/dev/pass1 obs=32k seek=0' /dev/pass1: splitting layers at 1992528 blocks :*-[ SEND DVD+R DOUBLE LAYER RECORDING INFORMATION failed with SK=2h/ASC=04h/ACQ=01h]: Resource temporarily unavailable* I pretty much have had no luck with burncd or other tools when it comes to dl burning. My DVD Burner is: acd1: DVDR LITE-ON DVDRW SOHW-832S/VTS3 at ata1-slave UDMA33 Since you got this to work on double layer dvd burning -- what type of burner do you have .. can you share your hardware specs ? Regards Rohit On 8/29/07, Wojciech Puchar [EMAIL PROTECTED] wrote: Has anyone successfully burnt double layer DVDs in FreeBSD. yes I have some home videos which were burnt on a large size dvd -- there is no encryption on them.. its just straight vob files. any ideas will be appreciated. I've had no luck with mkisofs or other tools that i've tried. so please read manuals. there is actually no difference between this and writing standard DVD. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Double Layer dvd burning in FreeBSD
Hi, Has anyone successfully burnt double layer DVDs in FreeBSD. I have some home videos which were burnt on a large size dvd -- there is no encryption on them.. its just straight vob files. any ideas will be appreciated. I've had no luck with mkisofs or other tools that i've tried. Regards Rohit ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Enquiry
Hello We are software reselling company in India.Can you please tell us how we can work with you for distribution of FreeBSD in India . Thanks Best regards Rohit Gupta Sapphire Infosystems Ist Floor,School Block-513, Vikas Marg ,Delhi-110092,INDIA PH:+91-11-55360147,+91-9312041251 www.sapphireinfo.in ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
spamassassin port not reading local.cf?
Hi Toomas I have this same problem Amavisd-new and SA 3.0. I think the problem is that SA is invoked through amavisd (not spamc or spamassassin). I hope I do not have to make all my local changes through amavisd.conf. Please do let me know if you discover another way. Rohit ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
OpenGL Hello World Example
Hi, This is something that has troubled me quite a bit. I followed the hello world tutorial for opengl found here. http://www.eecs.tulane.edu/www/Terry/OpenGL/Simple_Example.html#A%20Simple%20Example This is the command I'm using to compile it (as suggested at the website) gcc -o Hello_World Hello_World.c -lX11 -lMesaGL -lMesaGLU -lMesatk -lm However it says gltk.h not found when I have gltk.h in /usr/X11R6/include/GL/gltk.h This is the same type of scenario I ran into when I tried compiling qt examples. I have tried appending I/usr/X11R6/include/GL/gltk.h to the above gcc command. Any advice will be greatly appreciated. Thanks Rohit ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Keylogger For FreeBSD
Hi, I'd like to write a keylogger for my freebsd box. Something that would log all keyboard activity on my pc. I have peeked at the keyboard files in the kernel. However, if someone could point me int the right direction... it will be greatly appreciated. note: I know theres code out there, but I would like to write my own for learning purpose. Thanks Rohit ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Booting takes too long. Why? (/ was not properly dismounted)
Thanks for your help Jud, you are absolutely right. With issuing the halt command, there are no excessive delays in booting. Inface booting is really fast. Thanks Rohit On Saturday 14 June 2003 20:04, Jud wrote: On Sat, 14 Jun 2003 12:28:23 +0530, Shantanu Mahajan [EMAIL PROTECTED] wrote: | I shutdown using the shutdown -h now command | or reboot using reboot now did you try 'halt'? what msg. do you see after the shutdown is complete? From the halt(8) man page: Normally, the shutdown(8) utility is used when the system needs to be halted or restarted, giving users advance warning of their impending doom and cleanly terminating specific programs. From the shutdown(8) man page: The following options are available: -h The system is halted at the specified time. So Rohit is in fact using 'halt' in the way it is normally invoked, as an option to 'shutdown.' Is there a reason that 'halt' without 'shutdown' would be preferable in this case? Jud ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Network Problem with custom kernel
Hi, I'm new to freebsd. I'm using 4.6.2-RELEASE. After compiling a custom kernel I'm getting problem in the network. When I try to ping any machine I get message ping: sendto: No route to host I can't even ping the localhost . I guess my network interface is properly detected. ifconfig shows my network interface is xl0 I've allowed everything in the firewall on the very first rule. These are the options I've put in the kernel device miibus device xl options INET options INET6 options MROUTING options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_FORWARD options IPFIREWALL_VERBOSE_LIMIT=100 options IPFIREWALL_DEFAULT_TO_ACCEPT options IPDIVERT options IPFILTER options IPFILTER_LOG options IPFILTER_DEFAULT_BLOCK options IPSTEALTH I guess I'm missing something. Also, how can I do make distclean (as in linux) if I want to recompile then kernel ? Thanks a lot. regards, Rohit Neupane ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: running netscape 7.0.2 linux version on freebsd-5.1, help?
I encountered this and other bugs only when i had both mozilla and netscape installed. However I later re-installed my system and when I only had netscape... everything ran smoothly netscape mozilla tend to use the same .mozilla/ directory in your home dir Rohit On Tuesday 17 June 2003 01:23, Chris wrote: That should have been, Linux Emu (damned kitten) On Monday 16 June 2003 08:20 pm, Chris wrote: On Monday 16 June 2003 08:09 pm, Jud wrote: On Mon, 16 Jun 2003 20:00:31 -0500, sweetleaf [EMAIL PROTECTED] wrote: I just downloaded Netscape 7.0.2 from Netscape.com linux version and am running it under linux emulation on freebsd-5.1. The problem i am encountering , and i encountered the same issue with the latest mozilla. under linux emulation, is that when i exit Netscape or restart the system i am meet with the select user-profile *to start Netscape section. Ok, for ex. say i am running Netscape under the default profile, i have all my mail accounts setup, proxy setting etc now i need to shutdown my system, restart it , or just restart Netscapeso i start Netscape Odd - I don't recall my Mozilla havin this profile issue. And as far as Mozilla and Minux emu? Hmm, I didn't think it needed it. # /usr/compat/linux/usr/local/netscape/netscape Now i am ask when profile to start Netscape as, so i select the previous default i had been running Netscape under. The problem is after selecting default and clicking on start i am getting this error about it cant use that profile as its already in use...but its not because this is the first instance of Netscape i am attempting to start after a reboot. The only way i can get Netscape to start is to create another profile, which it does the same to after a reboot or restart. for. ex. i can create default 2 and start Netscape but if i try to start Netscape again with that profile its says that profile is already in use. If anybody has had this issue and solved it, i would appreciate some guidance on this. thanks, and have a good day. Re this and your Sun Java question: Why not use the FreeBSD linux- ports? (Haven't checked to see what the latest linux-Netscape port is; if it's not up to 7.0.2, you can install the earlier version, or at least look at what the port maintainer has done for hints with regard to such stuff as build options, places to install various files, etc.) Jud ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD Port/Distribution Installation
I went through the same problem. I think what you are refering to is that you are not quite sure how to start netscape or emacs. Although you have installed it in your system, you are not certain where it is right? Well, the ports system should place whatever programs you install in your PATH. So, the command you would use to find out where netscape or emacs is installed is: bash$- whereis emacs bash$- whereis netscape that should tell you where emacs or netscape. But if you HAVE installed them and they are in your path then they should just start when you type emacs or netscape Hopefully this helps Rohit On Thursday 12 June 2003 20:51, Sukhbinder Singh wrote: Hello, I had downloaded the program files into my local disk running freebsd but I am not able to run them. For, example I need to run emacs or netscape I cannot run them. Can someone please tell the steps of what I need to do in order to install these programs. They have been downloaded and is in my local harddisk. Any help will be helpful. Thanks Singh. ([EMAIL PROTECTED]) _ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cant get netscape or mozilla installer to run.
Heres your solution. You need the linux-libgtk. If you go through the packaging system. go to ftp://ftp.freebsd.org/pub/FreeBSD/ports/packages/All do an ls for linux-* find the linux-libgtk download it and type pkg_add -v linux-libgtk[someversion].tgz that should fix your problem. Regards Rohit On Friday 13 June 2003 10:05, SweeTLeaF wrote: I am running the latest 5.1 rel with linux emulation. I downloaded the mozilla and netscape installers from their own sites and am having problems when trying to run the ./netscape-installer or the mozilla-installer. the error i am getting a error that it cant find libgtk-1.2.so.0. i ran a find for this file and it does not appear to be on the system and i cant find it on the ports site. any help would be appreciated. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Booting takes too long. Why?
Hi, I'm curious why booting my FreeBSD box takes so long. Is there a way to bypass this. For some reason ever since 4.6 it has taken quite a bit of time fixing harddrive errors (or something) while booting which takes too long. Thanks Rohit ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Booting takes too long. Why? (/ was not properly dismounted)
Here is the dmesg. However, I should tell you that this has been the case with all my FreeBSD boxes. I have two PC's running FreeBSD and a Compaq laptop running FreeBSd all have different types of harddrives. The main problem is that everytime I boot I get the message saying / was not dismounted properly and then it goes through and fixes all the drive block errors. (This is the case on all my computers) I shutdown using the shutdown -h now command or reboot using reboot now Rohit opyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE #8: Wed May 21 13:22:57 GMT 2003 [EMAIL PROTECTED]:/usr/src/sys/compile/ROHIT_MAY11_2003 Timecounter i8254 frequency 1193182 Hz CPU: Mobile AMD Athlon(tm) XP 1500+ (1325.14-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x680 Stepping = 0 Features=0x383f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE AMD Features=0xc048MP,AMIE,DSP,3DNow! real memory = 251658240 (245760K bytes) avail memory = 240287744 (234656K bytes) Preloaded elf kernel kernel at 0xc0465000. module_register_init: MOD_LOAD (vesa, c0310844, 0) error 6 netsmb_dev: loaded Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 11 entries at 0xc00fdf10 apm0: APM BIOS on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: math processor on motherboard npx0: INT 16 interface pcib0: Host to PCI bridge on motherboard pci0: PCI bus on pcib0 pcib1: PCI to PCI bridge (vendor=1002 device=700f) at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: ATI model 4336 graphics accelerator at 5.0 irq 10 ohci0: AcerLabs M5237 (Aladdin-V) USB controller mem 0xf4014000-0xf4014fff irq 11 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: AcerLabs M5237 (Aladdin-V) USB controller on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered isab0: AcerLabs M1533 portable PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 pcm0: Acer Labs M5451 port 0x8400-0x84ff mem 0xf4015000-0xf4015fff irq 5 at device 8.0 on pci0 pcm0: unknown ac97 codec (id=0x41445363) pci_cfgintr_virgin: using routable interrupt 10 pci_cfgintr: ROUTE_INTERRUPT failed. pcic0: TI PCI-1410 PCI-CardBus Bridge mem 0xffbfe000-0xffbfefff at device 10.0 on pci0 pci_cfgintr_virgin: using routable interrupt 10 pci_cfgintr: ROUTE_INTERRUPT failed. pcic0: No PCI interrupt routed, trying ISA. pcic0: Polling mode pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial isa irq] pccard0: PC Card 16-bit bus (classic) on pcic0 rl0: RealTek 8139 10/100BaseTX port 0x8800-0x88ff mem 0xf4017800-0xf40178ff irq 11 at device 11.0 on pci0 ROHIT**rl0: Ethernet address: 00:08:02:f3:d2:03 ROHIT**miibus0: MII bus on rl0 rlphy0: RealTek internal media interface on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: unknown card (vendor=0x14f1, dev=0x2f00) at 12.0 irq 10 ohci1: AcerLabs M5237 (Aladdin-V) USB controller mem 0xf4016000-0xf4016fff irq 11 at device 15.0 on pci0 usb1: OHCI version 1.0, legacy support usb1: AcerLabs M5237 (Aladdin-V) USB controller on ohci1 usb1: USB revision 1.0 uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered atapci0: AcerLabs Aladdin ATA100 controller port 0x8080-0x808f irq 0 at device 16.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 alpm0: AcerLabs M15x3 Power Management Unit at device 17.0 on pci0 alpm0: driver is using old-style compatibility shims fwohci0: Texas Instruments TSB43AB22/A mem 0xf401-0xf4013fff,0xf4017000-0xf40177ff irq 10 at device 19.0 on pci0 fwohci0: PCI bus latency is 64. fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:08:02:71:9b:f3:cb:d2 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: IEEE1394(FireWire) bus on fwohci0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id = 0xc000ffc0, CYCLEMASTER mode firewire0: 1 nodes, maxhop = 0, cable IRM = 0 (me) smbus0: System Management Bus on alsmb0 smb0: SMBus general purpose I/O on smbus0 orm0: Option ROMs at iomem 0xc-0xcefff,0xdf000-0xd,0xe-0xe3fff on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3
Re: cant get netscape or mozilla installer to run.
Reason being, If the person encountered the error with the ./netscape-installer script then it implies that he is using the latest version of netscape downloaded from www.netscape.com itself. And this version of netscape was written primarily for linux and runs under linux emulation. The ports version of netscape is not at the latest version (the last I checked). Rohit On Friday 13 June 2003 14:29, Robert Huff wrote: Rohit writes: Heres your solution. You need the linux-libgtk. The bigger question would be: why are you using linux-netscape when there's a perfectly good native port(/package) available? (There _is_ a reason, but I haven't seen it mentioned.) Robert Huff ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
qt compile
Hi, I cant get simple qt helloworld programs to compile. It complains about not being able to find qapplication.h and other header files which reside in /usr/X11R6/include on my FreeBSD 4.8 system. I have tried using the -I/usr/X11R6/include -L/usr/X11R6/lib flags when I complie with gcc or g++. Please help Rohit ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: qt compile
Yes I do have QTDIR=/usr/X11R6 exported On Wednesday 11 June 2003 21:42, Andreas Kohn wrote: Am Wed, 2003-06-11 um 12.25 schrieb Rohit: Hi, I cant get simple qt helloworld programs to compile. It complains about not being able to find qapplication.h and other header files which reside in /usr/X11R6/include on my FreeBSD 4.8 system. I have tried using the -I/usr/X11R6/include -L/usr/X11R6/lib flags when I complie with gcc or g++. Please help Rohit Hello, Did you set the QTDIR environment variable correctly (ie to /usr/X11R6)? Regards, ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
