Re: [Gimp-developer] building GIMP from git
In fact, I also built glib from git, thus maybe GIO_EXTRA_MODULES was also needed. Anyway, I used it and everything is OK now. Olivier Lecarme 2015-10-07 21:23 GMT+02:00 Elle Stone : > On 10/07/2015 12:54 PM, Olivier wrote: > >> Finally I succedded in installing GIMP, by fetching gegl, babl, >> gdk-pixbuf, and gimp itself from git, and configuring and installing >> them all under the same prefix. Under Ubuntu 15.04, the GIO extra >> modules are located in usr/lib/x86_64-linux-gnu/gio/modules. >> >> Thus I used Martin Nordholts' explanation in >> http://www.gimp.org/source/howtos/gimp-git-build.html, but I added gegl, >> babl, and gdk-pixbuf tothe packages to be fetched from git, compiled and >> installed, and I added GIO_EXTRA_MODULES to the exported variables, >> although I'm not sure that is needed. >> >> Thanks to all! >> >> Olivier Lecarme >> > > Based on comments in https://aur.archlinux.org/packages/gegl-git/, it > does look like maybe the original problem was that GIMP was finding a > too-outdated version of GEGL. > > I never needed to export GIO_EXTRA_MODULES until I tried to run GIMP 2.8 > installed from the Gentoo package manager alongside babl/GEGL/GIMP from git > installed in a prefix. But here's the reference, fwiw: > > > https://mail.gnome.org/archives/gimp-developer-list/2015-February/msg00042.html > > https://mail.gnome.org/archives/gimp-developer-list/2015-February/msg00051.html > > Looking at what Mitch said, it seems exporting GIO_EXTRA_MODULES is only > be needed if glib is also built in the prefix. So sorry for the noise! if > you didn't also build glib in the prefix. > > For the next person trying to build GIMP from git who might stumble over > this thread, a few other "why it doesn't work and what to do" are > documented here: > > http://wiki.gimp.org/wiki/Hacking:Problems_and_solutions > > -- Olivier Lecarme ___ gimp-developer-list mailing list List address:gimp-developer-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
Re: [Gimp-developer] building GIMP from git
OK, I did that and everything is OK. Thanks. Olivier Lecarme 2015-10-08 8:18 GMT+02:00 Michael Natterer : > On Wed, 2015-10-07 at 18:03 +0200, Olivier wrote: > > I downloaded GEGL and BABL from the links on page http://www.gimp.org > > /, > > i.e. http://gegl.org/ and http://gegl.org/babl/. I compiled and > > installed > > them using the normal procedure (sudo ./configure && make && make > > install). > > > > Thus GEGL and BABL are not built from git > > But you must install babl and gegl from git in order to build > gimp from git. > > Just install them from git too, into the same prefix, using the > same environment. > > Regards, > --Mitch > > -- Olivier Lecarme ___ gimp-developer-list mailing list List address:gimp-developer-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
Re: [Gimp-developer] building GIMP from git
On Wed, 2015-10-07 at 18:03 +0200, Olivier wrote: > I downloaded GEGL and BABL from the links on page http://www.gimp.org > /, > i.e. http://gegl.org/ and http://gegl.org/babl/. I compiled and > installed > them using the normal procedure (sudo ./configure && make && make > install). > > Thus GEGL and BABL are not built from git But you must install babl and gegl from git in order to build gimp from git. Just install them from git too, into the same prefix, using the same environment. Regards, --Mitch ___ gimp-developer-list mailing list List address:gimp-developer-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
Re: [Gimp-developer] building GIMP from git
On 10/07/2015 12:54 PM, Olivier wrote: Finally I succedded in installing GIMP, by fetching gegl, babl, gdk-pixbuf, and gimp itself from git, and configuring and installing them all under the same prefix. Under Ubuntu 15.04, the GIO extra modules are located in usr/lib/x86_64-linux-gnu/gio/modules. Thus I used Martin Nordholts' explanation in http://www.gimp.org/source/howtos/gimp-git-build.html, but I added gegl, babl, and gdk-pixbuf tothe packages to be fetched from git, compiled and installed, and I added GIO_EXTRA_MODULES to the exported variables, although I'm not sure that is needed. Thanks to all! Olivier Lecarme Based on comments in https://aur.archlinux.org/packages/gegl-git/, it does look like maybe the original problem was that GIMP was finding a too-outdated version of GEGL. I never needed to export GIO_EXTRA_MODULES until I tried to run GIMP 2.8 installed from the Gentoo package manager alongside babl/GEGL/GIMP from git installed in a prefix. But here's the reference, fwiw: https://mail.gnome.org/archives/gimp-developer-list/2015-February/msg00042.html https://mail.gnome.org/archives/gimp-developer-list/2015-February/msg00051.html Looking at what Mitch said, it seems exporting GIO_EXTRA_MODULES is only be needed if glib is also built in the prefix. So sorry for the noise! if you didn't also build glib in the prefix. For the next person trying to build GIMP from git who might stumble over this thread, a few other "why it doesn't work and what to do" are documented here: http://wiki.gimp.org/wiki/Hacking:Problems_and_solutions ___ gimp-developer-list mailing list List address:gimp-developer-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
Re: [Gimp-developer] building GIMP from git
Finally I succedded in installing GIMP, by fetching gegl, babl, gdk-pixbuf, and gimp itself from git, and configuring and installing them all under the same prefix. Under Ubuntu 15.04, the GIO extra modules are located in usr/lib/x86_64-linux-gnu/gio/modules. Thus I used Martin Nordholts' explanation in http://www.gimp.org/source/howtos/gimp-git-build.html, but I added gegl, babl, and gdk-pixbuf tothe packages to be fetched from git, compiled and installed, and I added GIO_EXTRA_MODULES to the exported variables, although I'm not sure that is needed. Thanks to all! Olivier Lecarme ___ gimp-developer-list mailing list List address:gimp-developer-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
Re: [Gimp-developer] building GIMP from git
On 07/10/2015 18:03, Olivier wrote: I downloaded GEGL and BABL from the links on page http://www.gimp.org/, i.e. http://gegl.org/ and http://gegl.org/babl/. I compiled and installed them using the normal procedure (sudo ./configure && make && make install). Thus GEGL and BABL are not built from git, and they are installed in the system directories, not under a special prefix. Your articles seem to suggest that I should have chosen the second solution, but http://www.gimp.org/source/howtos/gimp-git-build.html does not suggest that. Since GEGL is installed in only one place, i.e. /usr/local/lib/, I don't understand where GIMP could find it in a wrong place. Hello, I had some surprises when building gimp (with gegl/babl from git too). First I tried to use babl and gegl provided by Debian testing, but they're not recent enough. Then I uninstalled Debian packages and install the babl/gegl builds from root. I don't remember if it succeeded but anyway, it wasn't ok for Gimp. Hopefully, this link helped me a lot: http://wiki.gimp.org/wiki/Hacking:Building/Linux It seems building process needs some "black magic" to make it easier :-) Julien ___ gimp-developer-list mailing list List address:gimp-developer-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
Re: [Gimp-developer] building GIMP from git
I downloaded GEGL and BABL from the links on page http://www.gimp.org/, i.e. http://gegl.org/ and http://gegl.org/babl/. I compiled and installed them using the normal procedure (sudo ./configure && make && make install). Thus GEGL and BABL are not built from git, and they are installed in the system directories, not under a special prefix. Your articles seem to suggest that I should have chosen the second solution, but http://www.gimp.org/source/howtos/gimp-git-build.html does not suggest that. Since GEGL is installed in only one place, i.e. /usr/local/lib/, I don't understand where GIMP could find it in a wrong place. 2015-10-07 17:38 GMT+02:00 Elle Stone : > On 10/07/2015 10:10 AM, Olivier wrote: > >> Hello all. >> >> I'm trying to build GIMP-2.9 as explained on >> http://www.gimp.org/source/howtos/gimp-git-build.html. I'm using Ubuntu >> 15.04. >> >> Everything seems to work smootly, but when I try using gimp-2.9 I get the >> error message: >> >> GEGL operation missing! >> >> GIMP requires the GEGL operation "gegl:maze". >> This operation cannot be found. Check your >> GEGL install and ensure it has been compiled >> with any dependencies required for GIMP. >> >> What am I doing wrong? When I build GEGL, the only warnings I get after >> configuring it are that the Vala support is missing, as well as avformat >> amd umfpack. >> >> Thanks for any help. >> >> > It sort of sounds like GIMP isn't finding a recent enough version of GEGL. > Did you install babl from git and GEGL from git in the same prefix as GIMP > from git? > > In case they might be helpful, I put up some articles on building and > updating GIMP from git: > > Building GIMP for artists and photographers > > http://ninedegreesbelow.com/photography/build-gimp-in-prefix-for-artists.html > > Updating GIMP for artists and photographers > > http://ninedegreesbelow.com/photography/update-gimp-in-prefix-for-artists.html > > The second article also explains how to use the git log to see the latest > updates. > -- Olivier Lecarme ___ gimp-developer-list mailing list List address:gimp-developer-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
Re: [Gimp-developer] building GIMP from git
On 10/07/2015 11:38 AM, Elle Stone wrote: On 10/07/2015 10:10 AM, Olivier wrote: Hello all. I'm trying to build GIMP-2.9 as explained on http://www.gimp.org/source/howtos/gimp-git-build.html. I'm using Ubuntu 15.04. Everything seems to work smootly, but when I try using gimp-2.9 I get the error message: GEGL operation missing! GIMP requires the GEGL operation "gegl:maze". This operation cannot be found. Check your GEGL install and ensure it has been compiled with any dependencies required for GIMP. What am I doing wrong? When I build GEGL, the only warnings I get after configuring it are that the Vala support is missing, as well as avformat amd umfpack. Thanks for any help. It sort of sounds like GIMP isn't finding a recent enough version of GEGL. Did you install babl from git and GEGL from git in the same prefix as GIMP from git? In case they might be helpful, I put up some articles on building and updating GIMP from git: Building GIMP for artists and photographers http://ninedegreesbelow.com/photography/build-gimp-in-prefix-for-artists.html Updating GIMP for artists and photographers http://ninedegreesbelow.com/photography/update-gimp-in-prefix-for-artists.html The second article also explains how to use the git log to see the latest updates. Hmm, also, as shown in the first article, based on a discussion on this list awhile back, sometimes even when building in a prefix, GIMP looks in the wrong place unless you add a line about the GIO_EXTRA_MODULES, as per the following (your linux OS might need lib64 instead of lib); PREFIX=$HOME/code/gimplch/install export PATH=$PREFIX/bin:$PATH export LD_LIBRARY_PATH=$PREFIX/lib:$LD_LIBRARY_PATH export XDG_DATA_DIRS=$PREFIX/share:$XDG_DATA_DIRS export ACLOCAL_FLAGS="-I $PREFIX/share/aclocal" export PKG_CONFIG_PATH=$PREFIX/lib/pkgconfig:$PKG_CONFIG_PATH export GIO_EXTRA_MODULES=/usr/lib/gio/modules export SRC_DIR=$HOME/code/gimplch/build ___ gimp-developer-list mailing list List address:gimp-developer-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
Re: [Gimp-developer] building GIMP from git
On 10/07/2015 10:10 AM, Olivier wrote: Hello all. I'm trying to build GIMP-2.9 as explained on http://www.gimp.org/source/howtos/gimp-git-build.html. I'm using Ubuntu 15.04. Everything seems to work smootly, but when I try using gimp-2.9 I get the error message: GEGL operation missing! GIMP requires the GEGL operation "gegl:maze". This operation cannot be found. Check your GEGL install and ensure it has been compiled with any dependencies required for GIMP. What am I doing wrong? When I build GEGL, the only warnings I get after configuring it are that the Vala support is missing, as well as avformat amd umfpack. Thanks for any help. It sort of sounds like GIMP isn't finding a recent enough version of GEGL. Did you install babl from git and GEGL from git in the same prefix as GIMP from git? In case they might be helpful, I put up some articles on building and updating GIMP from git: Building GIMP for artists and photographers http://ninedegreesbelow.com/photography/build-gimp-in-prefix-for-artists.html Updating GIMP for artists and photographers http://ninedegreesbelow.com/photography/update-gimp-in-prefix-for-artists.html The second article also explains how to use the git log to see the latest updates. ___ gimp-developer-list mailing list List address:gimp-developer-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
[Gimp-developer] building GIMP from git
Hello all. I'm trying to build GIMP-2.9 as explained on http://www.gimp.org/source/howtos/gimp-git-build.html. I'm using Ubuntu 15.04. Everything seems to work smootly, but when I try using gimp-2.9 I get the error message: GEGL operation missing! GIMP requires the GEGL operation "gegl:maze". This operation cannot be found. Check your GEGL install and ensure it has been compiled with any dependencies required for GIMP. What am I doing wrong? When I build GEGL, the only warnings I get after configuring it are that the Vala support is missing, as well as avformat amd umfpack. Thanks for any help. -- Olivier Lecarme ___ gimp-developer-list mailing list List address:gimp-developer-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list
Re: [Gimp-developer] Fade length setting for paint dynamics
On 06/10/15 19:35, Joao S. O. Bueno wrote: Sttting it programatically is likely a missing feature - it shouldbe available as gimp-context-fade-set-length -- and yes, it has nothing to do with percents Should I file a bug report for this? What should be done with the percent "unit" then? Remove it? ___ gimp-developer-list mailing list List address:gimp-developer-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-developer-list List archives: https://mail.gnome.org/archives/gimp-developer-list