Re: [Gimp-user] Export to EPS
Hi, Vytautas P. wrote: Some people using Wndows OS and The GIMP complains about their unability to open EPS files. Maybye they should install some libs or something? Yes - to export or import EPS on Windows, you need Ghostscript installed. You can get it at http://www.cs.wisc.edu/~ghost/ Cheers, Dave. -- David Neary [EMAIL PROTECTED] ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU https://lists.XCF.Berkeley.EDU/mailman/listinfo/gimp-user
Re: [Gimp-user] Multicolor pinwheel effect.
Hi John, making the gradient match exactly the circle will be the tough bit, but there's a nice trick to doing something like this: 1. Create a square image 2. Make a gradient that you want to use (I created a gradient with red at both ends, and a HSV clockwise blend mode) 3. Blend fill your rectangle 4. Add a white to transparent gradient on the bottom for the center of your circle (otherwise it'll look funny) 5. Apply a 'polar coordinates' filter You should get a pinwheel effect. To change the pinwheel, you just need to change the gradient. Cheers, Dave. John R. Culleton wrote: I want to create a multicolor pinwheel effect for a background, with the arms of each shade radiating out from a hub and curved rather than straight. And I want the colors to blend into each other as in a gradient. A rainbow gradient is an obvious starting point. Would anyone like to suggest a sequence of tools to arrive at this effect? I will post this query elsewhere, but will not crosspost. -- David Neary [EMAIL PROTECTED] ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU https://lists.XCF.Berkeley.EDU/mailman/listinfo/gimp-user
Re: [Gimp-user] Multicolor pinwheel effect.
On Monday 27 March 2006 11:30, Dave Neary wrote: Hi John, making the gradient match exactly the circle will be the tough bit, but there's a nice trick to doing something like this: 1. Create a square image 2. Make a gradient that you want to use (I created a gradient with red at both ends, and a HSV clockwise blend mode) 3. Blend fill your rectangle 4. Add a white to transparent gradient on the bottom for the center of your circle (otherwise it'll look funny) 5. Apply a 'polar coordinates' filter You should get a pinwheel effect. To change the pinwheel, you just need to change the gradient. Cheers, Dave. Sounds good. Will the rays of color be straight or curved? Perhaps I need to put the gradient on a diagonal for this effect. I will experiment! I should mention that after I create the graphic I will select just a portion of it for the background. So the center is not critical. ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU https://lists.XCF.Berkeley.EDU/mailman/listinfo/gimp-user
Re: [Gimp-user] Multicolor pinwheel effect.
Hi, John R. Culleton wrote: Sounds good. Will the rays of color be straight or curved? Perhaps I need to put the gradient on a diagonal for this effect. I will experiment! Pinch and whirl to perfection afterwards. The tricky bit is getting the radial pattern. Cheers, Dave. -- David Neary [EMAIL PROTECTED] ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU https://lists.XCF.Berkeley.EDU/mailman/listinfo/gimp-user
[Gimp-user] Re: Multicolor pinwheel effect.
Hi, [EMAIL PROTECTED] (2006-03-27 at 1050.47 -0500): I want to create a multicolor pinwheel effect for a background, with the arms of each shade radiating out from a hub and curved rather than straight. And I want the colors to blend into each other as in a gradient. A rainbow gradient is an obvious starting point. Would anyone like to suggest a sequence of tools to arrive at this effect? If I understood what you want, do the gradient from side to side then use polar coords to convert and get the star shape. And finally pinch and whirl for the twist. GSR ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU https://lists.XCF.Berkeley.EDU/mailman/listinfo/gimp-user
[Gimp-user] question about gimp
I have a question. When I go to paint the pic it blends all together. Do you know how you can turn off blending? TYIA. Jeri ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU https://lists.XCF.Berkeley.EDU/mailman/listinfo/gimp-user
[Gimp-user] Lightsaber
Some friends of mine are trying to make a short Star Wars movie, and need lightsaber graphics. I intend to use GIMP to add it in frame by frame (joyously fun, I know) but don't know how to do it (a problem, to be sure). So does anyone here have any ideas/experience in making fairly good looking glowing lines? ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU https://lists.XCF.Berkeley.EDU/mailman/listinfo/gimp-user
Re: [Gimp-user] color replacement
On Tuesday, March 28, 2006 10:25 AM [GMT+1=CET], cheap_sunglasses [EMAIL PROTECTED] wrote: hi, i'm editing a scanned picture, and was wondering if anyone could tell me how to replace all colors, except black, with whitei traced over the lines on the original with my mouse, but the original scan pixels are still there. any advice would be very much appreciated. Use the Select regions by color tool and click on one of the black areas. You may need to adjust the threshold setting. Then Select|Invert. Then use the Fill tool (the bucket) - selecting BG color fill so it will fill with white, so long as your foreground and background colours are the default black and white - by clicking the image. You should now have only black and white areas. Of course, this means *everything* that is not black will be wiped out and replaced with white. -- Bob Long ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU https://lists.XCF.Berkeley.EDU/mailman/listinfo/gimp-user
[Gimp-user] Help with colour matching problem and 'colorize'
Greetings. I'm a casual Gimp user. I have to make a brochure front-cover thing, consisting of a collection of existing images. I'm having trouble with colours. One particular image ( which is mostly blue, and is a large JPEG file ) copies and pastes correctly into a new image. When I print it, however, it turns quite cyan. I thought this might just be my printer drivers or something ( Epson R1800 with the latest gutenprint / gimpprint drivers ), but then I noticed something very interesting. When I select the layer with the blue image, right-click, and select: Layer == Colors == Colorize ... the blue image turns the *exact* colour that it turns out when printed - cyan. I've tried playing with the 'Hue' and 'Lightness' sliders. I can sort-of get a colour similar to the original, but not really. If I click 'Cancel', the colour returns to the original colour. What's going on ( specifically, why does the blue layer change colours the moment I open the 'colorize' dialog, and is this related to the colour of the final print ), and is my colour matching problem something I'm doing wrong / something I can fix? Thanks :) Dan -- Daniel Kasak IT Developer NUS Consulting Group Level 5, 77 Pacific Highway North Sydney, NSW, Australia 2060 T: (+61) 2 9922-7676 / F: (+61) 2 9922 7989 email: [EMAIL PROTECTED] website: http://www.nusconsulting.com.au ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU https://lists.XCF.Berkeley.EDU/mailman/listinfo/gimp-user
Re: [Gimp-user] Re: Multicolor pinwheel effect.
Might want to check out Filter-Render-Clouds-PlasmaFollowed by Filter-Distort-Whirl and Pinchhttp://www.galifree.com/misc/whirl.jpg to see a sample. I use the Plasma filter (in greyscale) for background replacements occasionally. ___ Gimp-user mailing list Gimp-user@lists.XCF.Berkeley.EDU https://lists.XCF.Berkeley.EDU/mailman/listinfo/gimp-user