Re: [h-cost] pinker alert

2006-02-10 Thread Lloyd Mitchell
Were these Fiscars or look-alikes?

One of the advantages of the Fiscar Soft Touch is that there is no finger
pinching.  I don't remember if they use this design with the scrapbook line.

One interesting note re Fiscar service on the ST products, at least, is that
you can get replacement springs when they give out (from overwork?).The last
time I requested replacements, they sent me a small handful!  Would that
they would would put a quality spring in to begin with.
Any way, the ST line has saved my fingers from calluses.

Kathleen
- Original Message - 
From: Dawn [EMAIL PROTECTED]
To: Historical Costume [EMAIL PROTECTED]
Sent: Thursday, February 09, 2006 11:06 AM
Subject: Re: [h-cost] pinker alert


 [EMAIL PROTECTED] wrote:

  Fiskar, I believe, makes a variety of pinking/dagging scissors--a
variety of designs. I don't have any, and I've seen them advertised only in
art-supply catalogs, so maybe their usefulness is limited to paper. I'm
always tempted to try a pair, but I can't decide among  wavy-cut, deep pink,
deckled-paper-effect, and the more complicated dags...and can't afford to
buy them all!
  Again: maybe no good for fabricHas anybody tried them?
  --Ruth Anne Baumgartner

 I have a pair I bought when I made my wedding invitations, and I didn't
 think they were all that good on paper. The handles were small and hurt
 my hands -- though they cut ok -- I found them unpleasant to use. They
 probably would have worked on fabric when new, but they won't now. And
 how would you sharpen something like that anyway?



 Dawn



 ___
 h-costume mailing list
 h-costume@mail.indra.com
 http://mail.indra.com/mailman/listinfo/h-costume


___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] pinker alert/Fiskars scissors

2006-02-10 Thread Suzi Clarke

At 21:46 10/02/2006, you wrote:

Were these Fiscars or look-alikes?

One of the advantages of the Fiscar Soft Touch is that there is no finger
pinching.  I don't remember if they use this design with the scrapbook line.

One interesting note re Fiscar service on the ST products, at least, is that
you can get replacement springs when they give out (from overwork?).The last
time I requested replacements, they sent me a small handful!  Would that
they would would put a quality spring in to begin with.
Any way, the ST line has saved my fingers from calluses.

Kathleen



Thanks for the suggestion Kathleen. I inherited my Fiskars Soft Touch 
third hand and recently broke the spring. Someone is bringing me a 
new pair from the U.S. as they are so much cheaper. I am too cheap to 
buy another pair, and I am having to use a pair of Fiskars shears 
instead - not nearly so easy. So I just wrote to Fiskars UK for a new 
spring, or somewhere I can get them fixed. Great tip - thanks again.


Suzi


___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] pinker alert/Fiskars scissors

2006-02-10 Thread Lloyd Mitchell
You are welcome!  The first time the problem happened, I sent the shears in
for service.  The last time, it was the 'clippers'.  They not only replaced
the spring in the ailing pair but sent along a new pair!  (Funny, the
clippers  never go on sale).  Also, the size of the clipper spring is about
one turn less than the Shears, so it makes a small difference when you are
trying to keep them in service.

kathleen



.- Original Message - From: Suzi Clarke [EMAIL PROTECTED]
To: Historical Costume [EMAIL PROTECTED]
Sent: Friday, February 10, 2006 5:53 PM
Subject: Re: [h-cost] pinker alert/Fiskars scissors


 At 21:46 10/02/2006, you wrote:
 Were these Fiscars or look-alikes?
 
 One of the advantages of the Fiscar Soft Touch is that there is no finger
 pinching.  I don't remember if they use this design with the scrapbook
line.
 
 One interesting note re Fiscar service on the ST products, at least, is
that
 you can get replacement springs when they give out (from overwork?).The
last
 time I requested replacements, they sent me a small handful!  Would that
 they would would put a quality spring in to begin with.
 Any way, the ST line has saved my fingers from calluses.
 
 Kathleen


 Thanks for the suggestion Kathleen. I inherited my Fiskars Soft Touch
 third hand and recently broke the spring. Someone is bringing me a
 new pair from the U.S. as they are so much cheaper. I am too cheap to
 buy another pair, and I am having to use a pair of Fiskars shears
 instead - not nearly so easy. So I just wrote to Fiskars UK for a new
 spring, or somewhere I can get them fixed. Great tip - thanks again.

 Suzi


 ___
 h-costume mailing list
 h-costume@mail.indra.com
 http://mail.indra.com/mailman/listinfo/h-costume


___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] pinker alert

2006-02-09 Thread Lloyd Mitchell
Ah alas, these are for paper Only. I have a friend that uses a rotary cutter
that comes with a variety of blades for fancy cuts.

Kathleen
- Original Message - 
From: [EMAIL PROTECTED]
To: Historical Costume [EMAIL PROTECTED]
Sent: Thursday, February 09, 2006 10:43 AM
Subject: Re: [h-cost] pinker alert


 Fiskar, I believe, makes a variety of pinking/dagging scissors--a variety
of designs. I don't have any, and I've seen them advertised only in
art-supply catalogs, so maybe their usefulness is limited to paper. I'm
always tempted to try a pair, but I can't decide among  wavy-cut, deep pink,
deckled-paper-effect, and the more complicated dags...and can't afford to
buy them all!
 Again: maybe no good for fabricHas anybody tried them?
 --Ruth Anne Baumgartner
 scholar gypsy and amateur costumer

 -Original Message-
 From: Lavolta Press [EMAIL PROTECTED]
 Sent: Feb 8, 2006 8:40 PM
 To: Historical Costume [EMAIL PROTECTED]
 Subject: Re: [h-cost] pinker alert
 
 I've been tempted, off and on, to bid on one of those crank models for
 pinking trimmings (I don't generally like to finish seams that way).
 That's why I've been reassured to see there's always a good selection on
 eBay (although I'm sure some of them are rusty and/or dull).
 
 What I really want though, is a choice of shapes beyond the standard
 rather shallow zigzag.  Has anyone found a modern or historic tool that
 really works well for that?
 
 Fran
 Lavolta Press
 http://.lavoltapress.com
 
 Lloyd Mitchell wrote:
 
  Thanks Fran, I love the one I got and didn't think of some of the other
ways
  of listing to find  one of the same for other people who might like to
gain
  one of these.
  Kathleen
 
 ___
 h-costume mailing list
 h-costume@mail.indra.com
 http://mail.indra.com/mailman/listinfo/h-costume

 ___
 h-costume mailing list
 h-costume@mail.indra.com
 http://mail.indra.com/mailman/listinfo/h-costume


___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] pinker alert

2006-02-09 Thread Diana Habra

 Ah alas, these are for paper Only. I have a friend that uses a rotary
 cutter
 that comes with a variety of blades for fancy cuts.


I bought a wavy rotary cutter to use for 18th c. edging.  I haven't used
it on a whole outfit but the inital testing worked well.

Diana

www.RenaissanceFabrics.net
Everything for the Costumer

Become the change you want to see in the world.
--Ghandi

___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


RE: [h-cost] pinker alert

2006-02-09 Thread otsisto
I have found that the scalloped worked okay on broadcloth and lightweight.
It was used for the decorative parts of a costume. It may have been that
they became dull with their first use because there were times the edge was
fray checked before the cut and so, they did not cut heavy material, kind of
gnawed the edge.
De

-Original Message-
Fiskar, I believe, makes a variety of pinking/dagging scissors--a variety of
designs. I don't have any, and I've seen them advertised only in art-supply
catalogs, so maybe their usefulness is limited to paper. I'm always tempted
to try a pair, but I can't decide among  wavy-cut, deep pink,
deckled-paper-effect, and the more complicated dags...and can't afford to
buy them all!
Again: maybe no good for fabricHas anybody tried them?
--Ruth Anne Baumgartner
scholar gypsy and amateur costumer


___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


RE: [h-cost] pinker alert- fancy sissors

2006-02-09 Thread REBECCA BURCH
I used the really fancy edged ones on fabric which had
been applied to lightweight fusible glue.  It made a
nice edge and the fusible didn't seem to gum up the
blades at all.

--- otsisto [EMAIL PROTECTED] wrote:

 I have found that the scalloped worked okay on
 broadcloth and lightweight.
 It was used for the decorative parts of a costume.
 It may have been that
 they became dull with their first use because there
 were times the edge was
 fray checked before the cut and so, they did not cut
 heavy material, kind of
 gnawed the edge.
 De
 
 -Original Message-
 Fiskar, I believe, makes a variety of
 pinking/dagging scissors--a variety of
 designs. I don't have any, and I've seen them
 advertised only in art-supply
 catalogs, so maybe their usefulness is limited to
 paper. I'm always tempted
 to try a pair, but I can't decide among  wavy-cut,
 deep pink,
 deckled-paper-effect, and the more complicated
 dags...and can't afford to
 buy them all!
 Again: maybe no good for fabricHas anybody tried
 them?
 --Ruth Anne Baumgartner
 scholar gypsy and amateur costumer
 
 
 ___
 h-costume mailing list
 h-costume@mail.indra.com
 http://mail.indra.com/mailman/listinfo/h-costume
 


Rebecca Burch
Center Valley Farm
Duncan Falls, Ohio, USA
___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] pinker alert

2006-02-08 Thread Lavolta Press
If you go to ebay's Collectibles/Vintage Sewing category, without going 
down into Tools, and search on pinking machine as two words (not a 
phrase), searching for those words in the listings as well as the 
titles, there are about ten pinking machines are listed. Which is about 
the usual number for any given day on eBay.  I've thought of getting one 
off and on.


Fran
Lavolta Press
http://www.lavoltapress.com

Lloyd Mitchell wrote:


Hi all, I forget who it was who was interested in a 19th C Pinker.  There is 
another up on eBay  right now.  You will find it listed under Sewing tools.  
This looks to be pretty much the same as the one I found two weeks ago.

Kathleen
___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume



___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] pinker alert

2006-02-08 Thread Lloyd Mitchell
Thanks Fran, I love the one I got and didn't think of some of the other ways
of listing to find  one of the same for other people who might like to gain
one of these.
Kathleen
- Original Message - 
From: Lavolta Press [EMAIL PROTECTED]
To: Historical Costume [EMAIL PROTECTED]
Sent: Wednesday, February 08, 2006 5:22 PM
Subject: Re: [h-cost] pinker alert


 If you go to ebay's Collectibles/Vintage Sewing category, without going
 down into Tools, and search on pinking machine as two words (not a
 phrase), searching for those words in the listings as well as the
 titles, there are about ten pinking machines are listed. Which is about
 the usual number for any given day on eBay.  I've thought of getting one
 off and on.

 Fran
 Lavolta Press
 http://www.lavoltapress.com

 Lloyd Mitchell wrote:

  Hi all, I forget who it was who was interested in a 19th C Pinker.
There is another up on eBay  right now.  You will find it listed under
Sewing tools.  This looks to be pretty much the same as the one I found two
weeks ago.
 
  Kathleen
  ___
  h-costume mailing list
  h-costume@mail.indra.com
  http://mail.indra.com/mailman/listinfo/h-costume
 
 
 ___
 h-costume mailing list
 h-costume@mail.indra.com
 http://mail.indra.com/mailman/listinfo/h-costume


___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] pinker alert

2006-02-08 Thread Lavolta Press
I've been tempted, off and on, to bid on one of those crank models for 
pinking trimmings (I don't generally like to finish seams that way). 
That's why I've been reassured to see there's always a good selection on 
eBay (although I'm sure some of them are rusty and/or dull).


What I really want though, is a choice of shapes beyond the standard 
rather shallow zigzag.  Has anyone found a modern or historic tool that 
really works well for that?


Fran
Lavolta Press
http://.lavoltapress.com

Lloyd Mitchell wrote:


Thanks Fran, I love the one I got and didn't think of some of the other ways
of listing to find  one of the same for other people who might like to gain
one of these.
Kathleen


___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] pinker alert

2006-02-08 Thread Lloyd Mitchell
Checking the instructions given here, do note that all of the buy-it-now
items are art prints!
Kathleen
- Original Message - 
From: Lavolta Press [EMAIL PROTECTED]
To: Historical Costume [EMAIL PROTECTED]
Sent: Wednesday, February 08, 2006 5:22 PM
Subject: Re: [h-cost] pinker alert


 If you go to ebay's Collectibles/Vintage Sewing category, without going
 down into Tools, and search on pinking machine as two words (not a
 phrase), searching for those words in the listings as well as the
 titles, there are about ten pinking machines are listed. Which is about
 the usual number for any given day on eBay.  I've thought of getting one
 off and on.

 Fran
 Lavolta Press
 http://www.lavoltapress.com

 Lloyd Mitchell wrote:

  Hi all, I forget who it was who was interested in a 19th C Pinker.
There is another up on eBay  right now.  You will find it listed under
Sewing tools.  This looks to be pretty much the same as the one I found two
weeks ago.
 
  Kathleen
  ___
  h-costume mailing list
  h-costume@mail.indra.com
  http://mail.indra.com/mailman/listinfo/h-costume
 
 
 ___
 h-costume mailing list
 h-costume@mail.indra.com
 http://mail.indra.com/mailman/listinfo/h-costume


___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] pinker alert

2006-02-08 Thread Lloyd Mitchell
What I like about the nifty tool that I  got is that the edging results on
soft cotton is a rather dainty feathered effect,  On stiffer fabric, it
gives the expected sharp zig-zag- pattern.

My present project is mainly h-costume inspiration doll clothing and the
results for ruschings is  simpler but elegant strips that do not require
more ornamentation or time to turn the edges.  I have plans for Ordinary
costume seam finishing to look forward to.

Kathleen


 - Original Message - 
From: Lavolta Press [EMAIL PROTECTED]
To: Historical Costume [EMAIL PROTECTED]
Sent: Wednesday, February 08, 2006 8:40 PM
Subject: Re: [h-cost] pinker alert


 I've been tempted, off and on, to bid on one of those crank models for
 pinking trimmings (I don't generally like to finish seams that way).
 That's why I've been reassured to see there's always a good selection on
 eBay (although I'm sure some of them are rusty and/or dull).

 What I really want though, is a choice of shapes beyond the standard
 rather shallow zigzag.  Has anyone found a modern or historic tool that
 really works well for that?

 Fran
 Lavolta Press
 http://.lavoltapress.com

 Lloyd Mitchell wrote:

  Thanks Fran, I love the one I got and didn't think of some of the other
ways
  of listing to find  one of the same for other people who might like to
gain
  one of these.
  Kathleen
 
 ___
 h-costume mailing list
 h-costume@mail.indra.com
 http://mail.indra.com/mailman/listinfo/h-costume


___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume