Catalog Question
Hello everyone, I just started receiving the following message on a catalog IEC361I CATALOG CATLOG.MVS.VGEM913 (DATA) HAS REACHED 82% OF THE MAXIMUM EXTENTS The messages are coming out about twice a month. I am running z/OS 1.9 Can anyone tell me, what is the proper way to go about expanding the catalog. I started looking on the internet but unable to find out exactly how to go about it. Thanks for any help that I can get. Frank W Sabo Jr 101 Kappa Drive Pittsburgh Pa 15238 412 967-3764 frank.s...@gianteagle.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: FTP load mods from z/OS to laptop
Tony: Here is what I use for Disaster Recovery please see attached file Hope that this helps Frank W Sabo Jr 101 Kappa Drive Pittsburgh Pa 15238 412 967-3764 frank.s...@gianteagle.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Tony Santo Sent: Monday, October 31, 2011 2:19 PM To: IBM-MAIN@bama.ua.edu Subject: FTP load mods from z/OS to laptop Does anyone have any idea how to copy or ftp load pds mods to a laptop and then copy or ftp back to z/os? Thanks tony -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html THE FOLLOWING PROCEDURE WILL BE USED TO UNLOAD A PDS ONTO A PC, UNIX OR NT SYSTEMS AND RESTORE THE PDS BACK ONTO THE Z/OS SYSTEM. IT IS TO BE USED AT DISASTER RECOVERY. ** *** NOTE CHANGE THE LIBRARY NAMES IN THE EXAMPLES BELOW*** *** SYS1.SYSTEMS.LINKLIB *** *** GEM.SYSTEMS.DISASTER *** *** GEM.SYSTEMS.TS.DISASTER*** ** ****** *** OFF LOAD THE PDS LIBRARIES *** ****** ** THE FOLLOWING JOBS CAN BE FOUND IN GEM.SYSTEMS.JCLLIB ALSO SEE SAMPLE JCL LOCATED BELOW. 1. RUN JOB PDSUNLD1 2. LOGON TO THE PC, UNIX OR NT SYSTEM AND DO THE FOLLOWING 3. START UP A FTP SESSION WITH IBM MAINFRAME A. ENTER USER ID AND PASSWORD. B. ENTER TYPE BINARY C. ENTER get 'SETSFWS.SYSTEMS.DISASTER.NETDATA' SYSTEMS.DISASTER D. ENTER get 'SETSFWS.SYSTEMS.TS.DISASTER.NETDATA' SYSTEMS.TS.DISASTER E. ENTER get 'SETSFWS.SYSTEMS.LINKLIB.NETDATA' SYSTEMS.LINKLIB F. AFTER THE FILE IS TRANSFERS IS COMPLETE G. ENTER QUIT THE FILE SHOULD NOW BE OFFLOADED ONTO THE PC, UNIX OR NT SYSTEM. ** ****** *** THE FOLLOWING PROCEDURE WILL BE USED TO RESTORE A PDS ONTO *** *** THE Z/OS SYSTEM FROM A PC, UNIX OR NT SYSTEMS *** ****** *** ONCE RESTORED RENAME THE FOLLOWING DATASETS*** *** ON THE DISASTER RECOVERY FLOOR SYSTEM *** ****** ***SETSFWS.NEW.DISASTER TO GEM.SYSTEMS.DISASTER *** ***SETSFWS.NEW.LINKLIB TO SYS1.SYSTEMS.LINKLIB *** ****** ** THE FOLLOWING JOBS CAN BE FOUND IN GEM.SYSTEMS.JCLLIB ALSO SEE SAMPLE JCL BELOW. 1. RUN JOB PDSUNLD2 2. LOGON TO THE PC, UNIX OR NT SYSTEM AND DO THE FOLLOWING 3. START UP A FTP SESSION WITH IBM MAINFRAME A. ENTER USER ID AND PASSWORD. B. ENTER TYPE BINARY C. ENTER PUT SYSTEMS.DISASTER 'SETSFWS.NEW.DISASTER.NETDATA' D. ENTER PUT SYSTEMS.TS.DISASTER 'SETSFWS.NEW.TS.DISASTER.NETDATA' E. ENTER PUT SYSTEMS.LINKLIB 'SETSFWS.NEW.LINKLIB.NETDATA' F. AFTER THE FILE IS TRANSFER IS COMPLETE G. ENTER QUIT 4. RUN JOB PDSUNLD3 THE FILE SHOULD NOW BE RESTORED ON THE Z/OS SYSTEM -- SAMPLE JCL -- EXAMPLE JCL PDSUNLD1 //SETSFWSA JOB OS390,'SABO',CLASS=P,MSGCLASS=X,PRTY=3, // NOTIFY=SETSFWS //PROC JCLLIB ORDER=(GEM.TEST.CD.PROCLIB) /*JOBPARM R=47 //** //* //* S0CLEAN DELETE: DELETE: SETSFWS.SYSTEMS.DISASTER.NETDATA //* DELETE: SETSFWS.NEW.DISASTER.NETDATA //* DELETE: SETSFWS.NEW.DISASTER //* //* S1XMIT INPUT: USER002.SYSTEMS.DISASTER //*OUTPUT: SETSFWS.SYSTEMS.DISASTER.NETDATA //* //** //* DELETE ALL WORK FILES TO HANDLE POSSIBLE LEFT OVER //* FILES FROM PREVIOUS RUN. //** //S0CLEANEXEC PGM=IKJEFT01 //SYSTSPRT
SMPE order error
Good morning everyone. We are in the middle of upgrading our three lpars from z/OS 1.9 to Z/OS 1.11 and applying the regression PTF's on them before testing the new release. The first was our tech lpar all the fixes have been received and applied, with no problems. However in attempting to receive the ptf's for the test lpar, using the same user id as the tech lpar, we are getting the following error and not sure exactly how to fix it. We have tried to change the permission on the directory Any ideas would be gratefully appreciated. . GIM68700IORDER ORD6 HAS BEEN SENT TO THE SERVER AT https://eccgw01.boulder.ibm.com/services/projects/ecc/ws/. GIM693ISMP/E HAS BEEN WAITING 15 MINUTES FOR ORDER ORD6. SMP/E WILL WAIT A MAXIMUM OF 120 MINUTES. GIM693ISMP/E HAS BEEN WAITING 30 MINUTES FOR ORDER ORD6. SMP/E WILL WAIT A MAXIMUM OF 120 MINUTES. GIM69144IORDER ORD6 IS READY FOR DOWNLOAD. GIM43500S ** THE CALL TO THE BPX1SPN SERVICE FAILED. THE RETURN CODE WAS '0081'X AND THE REASON CODE WAS '053B006C'X. GIM20501IRECEIVE PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE WAS 12. GIM20502ISMP/E PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE WAS 12. SMP/E IS AT LEVEL 35.38. Frank Sabo Sr. Systems Administrator Giant Eagle Inc. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Internet Service Retrieval services question
Hello everyone, We are in the middle of trying to put on migration maintenance for z/os 1.9 going to z/os 1.11. I set up the Internet Service Retrieval services but when trying to pull back the required fixes with the following job. ///RECEIVE EXEC PGM=GIMSMP,REGION=0M //SMPCSIDD DSN=SMPE.GLOBAL.CSI,DISP=SHR //*SMPNTSDD PATH='/U/SMPE/SMPNTS/',PATHDISP=KEEP //SMPNTSDD PATH='/smpnts/',PATHDISP=KEEP //SMPOUTDD SYSOUT=* //SMPRPTDD SYSOUT=* //SYSPRINT DD SYSOUT=* //SMPCNTL DD * SET BDY(GLOBAL). RECEIVE ORDER( CONTENT(ALL) /* SMP/E RECOMMENDS ORDERING AND RECEIVING ALL APPLICABLE PTFS. IF YOU CHOOSE NOT TO ORDER ALL, THEN ORDER ONLY THE RESOLVING PTFS: CONTENT(PTFS( UA42084 UA44025 UA44704 UA44730 UA45080 UA45616 UA45844 UA46198 UA46207 UA46261 UA46303 UA46464 UA46859 UA48048 UA48184 UA50338 UA51081 UA52280 UA52327 UA56369 UA56737 UA57719 UA58168 UK41040 UK90015 )) */ ORDERSERVER(SMPOSRVR) /* SPECIFY THE ORDERSERVER DD */ CLIENT (SMPCLNT ) /* SPECIFY THE CLIENT DDNAME. */ ) DELETEPKG. /* //*ORDRSRVR DD * //SMPOSRVR DD * https://eccgw01.boulder.ibm.com/services/projects/ecc/ws/"; keyring="GEKEYRNG" certificate="smpe client certificate"> /* //SMPCLNT DD * -v -f "//'TCPIVP.TCPPARMS(FTPPDATA)'" &REMOTE_USER;@&REMOTE_HOST; &REMOTE_PW; /// The job seems to execute okay except when doing the FTP process to put the PTF back. I get the following error. Not sure exactly what I need to change, any help would be appreciated. > /bin/ftp -e -v -f "//'TCPIVP.TCPPARMS(FTPPDATA)'" local.ftpproxy.com 21 EZY2640I Using 'TCPIVP.TCPPARMS(FTPPDATA)' for local site configuration paramete rs. EZYFT47I 'TCPIVP.TCPPARMS(FTPPDATA)' file, line 54: Ignoring keyword "INACTIVE". EZYFT47I 'TCPIVP.TCPPARMS(FTPPDATA)' file, line 55: Ignoring keyword "JESLRECL". EZYFT47I 'TCPIVP.TCPPARMS(FTPPDATA)' file, line 56: Ignoring keyword "JESPUTGETT O". EZYFT47I 'TCPIVP.TCPPARMS(FTPPDATA)' file, line 57: Ignoring keyword "JESRECFM". EZYFT47I 'TCPIVP.TCPPARMS(FTPPDATA)' file, line 71: Ignoring keyword "SMF". EZYFT26I Using 7-bit conversion derived from 'ISO8859-1' and 'IBM-1047' for the control connection. EZYFT32I Using the same translate tables for the control and data connections. EZA1450I IBM FTP CS V1R9 EZA1772I FTP: EXIT has been set. EZYFT18I Using catalog '/usr/lib/nls/msg/C/ftpdmsg.cat' for FTP messages. EZA1554I Connecting to: local.ftpproxy.com 208.87.32.75 port: 21. EZA2589E Connection to server interrupted or timed out. Initial connection EZA1735I Std Return Code = 1, Error Code = 8 > QUIT GIM69233I FTP FAILED, ATTEMPT 01 OF 10. FTP WILL BE RETRIED IN 60 SECONDS. After 10 times the job times out and ends with a CC 0012 . Frank W Sabo Jr 101 Kappa Drive Pittsburgh Pa 15238 412 967-3764 frank.s...@gianteagle.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
RRS Installaion Question
Hello everyone, I need to install RRS onto my LPARS however in doing the defines for the RRS datasets I ran out of space in the system logger datasets. My question if I switch over to the secondary logger dataset and then delete and redefine the primary logger dataset and then switch back to the primary new logger dataset, will it have any effect on the CICS regions that currently executing on the various LPARS since they are also defined into the primary and secondary logger datasets? Or do I have to do the switch when the CICS regions are not up and processing Frank W Sabo Jr 101 Kappa Drive Pittsburgh Pa 15238 412 967-3764 frank.s...@gianteagle.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
EMC DLM box
Good afternoon everyone, Question does any one out there have an EMC DLM box? I have been trying to get one up and functional for a while now. I have genned the box to both HCD and SMS the problem that I am having is in the SMS definitions for the box does not show up as manual as per EMC instead they show up a blank. In SMS 10 3 menu. LIBRARY ,DEVICELIBRARYLIBRARY NAME,TYPE TYPE ID --(2)---,--(3)--- ---(4)--- --(5)-- PRODLIB1, - 1 If possible I would like to have a conversation with someone as to what I am doing wrong so that I can get this project moving forward. Thanks for any help that I can get. Frank W Sabo Jr. SR. Systems Administrator Giant Eagle Inc. Phone: 412 967-3764 Fax:412 967-6120 Email: frank.s...@gianteagle.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
FTP and systems PING question.
FTP and systems PING question. Environment: We have Z9 J01 with one processor with three LPARS, production, test and tech, all three shares one OSA adapter. The systems are running z/OS 1.9. Looking at my monitor's, the production lpar is only 29.5% busy while the test lpar is 2.2% the tech lpar does not come into play since it my sand box. IO and paging are not very heavy at the time. I talked with network personnel and the see not issues on the network at the time failure. Problem: We have six UNIX boxes that all issue a ping command to the mainframe at the same time before starting the FTP process. Five pings are directed to the production LPAR and one box is directed to the test LPAR. The all five ping's failed pointing to the production side but the test completed successfully. I don't see any TCPIP errors on either LPAR. I can not explain the difference between the two LPARS why one works and the other one fails. We currently do this process about 1500 times a day if not more. The process works fine most of the time but every once in a while it fails. Not sure where to look for the problem the monitors and logs don't show anything that I can see. Any help would be appreciated. Frank W Sabo Jr. SR. Systems Administrator Giant Eagle Inc. Phone: 412 967-3764 Fax:412 967-6120 Email: frank.s...@gianteagle.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Error Message in CICS shutdown.
I have questions for you, we are running CICS 3.2 and Z/OS 1.9 and brought up a new CICS region during shutdown we were getting the following error messages DFHTM1782I CICSP5 All non-system tasks have been successfully terminated. BPXP018I THREAD 18E8DDC0, IN PROCESS 16777249, ENDED WITHOUT BEING UNDUBBED WITH COMPLETION CODE 0033E000, AND REASON CODE . BPXP018I THREAD 18E8ECD0, IN PROCESS 16777248, ENDED WITHOUT BEING UNDUBBED WITH COMPLETION CODE 0033E000, AND REASON CODE . I fixed the problem in the past can not remember what was done, does anyone have any idea on how to correct the problem Frank W Sabo Jr. SR. Systems Administrator Giant Eagle Inc. Phone: 412 967-3764 Fax:412 967-6120 Email: frank.s...@gianteagle.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Racf Question
Good Afternoon, I have a RACF question I need to remove a CICS profile from a class, I have a product Vanguard Administrator It show the following Data: Extract, GENERAL RESOURCE PROFILE SUMMARY Row 1 to 12 of 12, COMMAND ===>,,SCROLL ===>,CSR , Information as of: FEB 10, 2010 00:05 , Select one or more entries (or,/,for popup): Issue,CMDSHOW,to turn legend off (B)CL ,Clone Resource command, PC ,Profile Conditional Access (B)CX ,Clone Resource Long Profile Name , PG ,Profile Grouping Class Report (B)DL ,Delete Resource command , PI ,Profile Installation Data IO ,ID Ownership Report ,(B)RB ,Rebuild Resource RACF commands LR ,List RACF Resource Profile, S ,Display continued info LV ,List VRA Resource info, VRC,Enter VRC Facility PA ,Profile Standard Access List , VSR,Enter Vanguard Advisor CMD,Class, ,Profile,Name ,Typ,Owner, ,UACC --- ___,G$PBTRN RGCBRCDIS RGMVSNONE ___,G$PYTRN RGCBRCDIS RGMVSNONE ___,G$P1TRN RGCBRCDIS RGMVSNONE ___,G$P2TRN RGCBRCDIS RGMVSNONE ___,G$P3TRN RGCBRCDIS RGMVSNONE ___,G$P4TRN RGCBRCDIS RGMVSNONE ___,G$P5TRN RGCBRCDIS RGMVSNONE ___,G$P6TRN RGCBRCDIS RGMVSNONE ___,G$P7TRN RGCBRCDIS RGMVSNONE ___,G$P8TRN RGCBRCDIS RGMVSNONE ___,G$P9TRN RGCBRCDIS RGMVSNONE ___,GCICSTRN RGCBRCDIS RGMVSNONE *** Bottom of data DIS RGMVSNONE I want to remove profile from G$PYTRN. If I do a DL command on the line it generated the following command * Top of Data ** TO EXECUTE COMMANDS ENTER ONE OF THE FOLLOWING: VRAEXEC - EXECUTE COMMANDS REALTIME VRABATCH - GENERATE JCL FOR YOU TO SUBMIT VRASCHED - SCHEDULE COMMANDS FOR FUTURE DATE AND TIME RDEL G$PYTRN RGCBRC SETROPTS RACLIST (T$PYTRN ) REFRESH Bottom of Data My question is this will it just remove the profile from that class or will it delete the profile form all the classes? The RACF manual states that it will delete if from the class Any help will be appreciated Thanks Frank W Sabo Jr. SR. Systems Administrator Giant Eagle Inc. Phone: 412 967-3764 Fax:412 967-6120 Email: frank.s...@gianteagle.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
FTP ICH408I message
Good Afternoon everyone,, We recently converted from OS/390 2.10 to ZOS 1.9 The FTP Processes are now getting the following message but they all complete okay. Does anyone know how to correct the problem? ICH408I USER(PRDJB ) GROUP(PRODGRP ) NAME(PROD CA7 SURROGAT ID) 616 /etc/resolv.conf CL(FSOBJ ) FID(01E9F1F9D9E2F4C396040108) INSUFFICIENT AUTHORITY TO OPEN ACCESS INTENT(R--) ACCESS ALLOWED(OTHER ---) EFFECTIVE UID(91) EFFECTIVE GID(20) Frank W Sabo Jr. SR. Systems Administrator Giant Eagle Inc. Phone: 412 967-3764 Fax:412 967-6120 Email: frank.s...@gianteagle.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
FTP Question
We are in the middle of converting form OS/390 2.10 to Z/OS 1.9 and ran into a FTP problem We are able to FTP to a tape drive on our current system, however when we FTP to a tape drive on the Z/OS 1.9 system we get the following Error (error code 0218 info code S99ERSN 0FD6) Any help would be appreciated. . EZA1460I Command: EZA1736I cd /usr/util/prod/data/rp EZA1701I >>> CWD /usr/util/prod/data/rp 250 CWD command successful. EZA1460I Command: EZA1736I locsite lrecl=80 unit=cart EZA1460I Command: EZA1736I get rpp1673_shadow_file.dat 'pwh99o.data.rpfile.not.gdg(+1)' EZA2562W Allocation of PWH99O.DATA.RPFILE.NOT.GDG.G2068V00 failed (error code 0218 info code S99ERSN 0FD6) EZA1735I Std Return Code = 16000, Error Code = 00018 EZA1701I >>> QUIT 221 Goodbye. Frank W Sabo Jr. SR. Systems Administrator Giant Eagle Inc. Phone: 412 967-3764 Fax:412 967-6120 Email: frank.s...@gianteagle.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TEST
Test reply -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Howard Rifkind Sent: Monday, September 22, 2008 11:41 AM To: IBM-MAIN@BAMA.UA.EDU Subject: TEST TEST to the List...Please be kind enough to reply. Thanks. _ LEGAL NOTICE Unless expressly stated otherwise, this message is confidential and may be privileged. It is intended for the addressee(s) only. Access to this E-mail by anyone else is unauthorized. If you are not an addressee, any disclosure or copying of the contents of this E-mail or any action taken (or not taken) in reliance on it is unauthorized and may be unlawful. If you are not an addressee, please inform the sender immediately, then delete this message and empty from your trash. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Tape Libraries
Today we ate currently using a Magstar tape library with B1 drives and a VTS to do our tape processing. Management wants to get rid to the Magstar and VTS and wants go to some other solution due to the high maintenance cost. On the open systems side of the house are currently using two CDL libraries systems from EMC and are getting two LTO systems in. EMC has products known as a MDL for the z/OS environment and we are currently looking at it. These are my questions. What are other people using as a tape solution at the various datacenters? Has anyone connected to or heard of anyone using any type of LTO units for the mainframe environment? If so what are they? Is anyone today using the EMC MDL solution? Thanks for you help. Frank W Sabo Jr. SR. Systems Administrator Giant Eagle Inc. Phone: 412 967-3764 Fax:412 967-6120 Email: [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Stupid Question of the day.
I am going to do a migration from OS/390 2.10 to zOS 1.9. The mainframe was supposed to go away six years ago, however some of the applications have been migrated off, but other still remain. Change in management decision to keep the mainframe as a viable platform and upgrade it with new hardware and software. However that is not my question, we run a shared JES2 spool between multiple LPARS a programmer wants to logon to TSO several times using the same user id. Today we can not do it , you get a jcl error. Has this changed with the newer releases of the operating systems? I thought I would ask before I started digging into it. Thanks for any help. Frank W Sabo Jr. SR. Systems Administrator Giant Eagle Inc. Phone: 412 967-3764 Fax:412 967-6120 Email: [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Delete a printer in jes
I use this command to remove a printer. To DELETE A PRINTER TO JES2 $DEL DESTID(1) 1 = printer name How did you add the printer? Frank W Sabo Jr. SR. Systems Administrator Giant Eagle Inc. Phone: 412 967-3764 Fax:412 967-6120 Email: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of ITURIEL DO NASCIMENTO NETO Sent: Tuesday, April 29, 2008 2:49 PM To: IBM-MAIN@BAMA.UA.EDU Subject: RES: Delete a printer in jes Hélio, I think you need a warm start (IPL). Atenciosamente / Regards / Saludos Ituriel do Nascimento Neto Banco Bradesco S/A 4254/DPCD Alphaville Engenharia de Software - Sistemas Operacionais Mainframes Tel: 55 11 4197-2021 Fax: 55 11 4197-2814 |-Mensagem original- |De: IBM Mainframe Discussion List |[mailto:[EMAIL PROTECTED] Em nome de HELIO Enviada em: terça-feira, |29 de abril de 2008 15:31 |Para: IBM-MAIN@BAMA.UA.EDU |Assunto: Delete a printer in jes | |Hi | |I added a printer in jes and now I am stating delete it. | |Someone knows how to delete a printer in jes? |I looked in the manual jes commands and not found. | |thanks | |-- |Hélio José da Silva |Depto. Software Básico | |-- |For IBM-MAIN subscribe / signoff / archive access instructions, send |email to [EMAIL PROTECTED] with the |message: GET IBM-MAIN INFO Search the archives at |http://bama.ua.edu/archives/ibm-main.html | | AVISO LEGAL Esta mensagem é destinada exclusivamente para a(s) pessoa(s) a quem é dirigida, podendo conter informação confidencial e/ou legalmente privilegiada. Se você não for destinatário desta mensagem, desde já fica notificado de abster-se a divulgar, copiar, distribuir, examinar ou, de qualquer forma, utilizar a informação contida nesta mensagem, por ser ilegal. Caso você tenha recebido esta mensagem por engano, pedimos que nos retorne este E-Mail, promovendo, desde logo, a eliminação do seu conteúdo em sua base de dados, registros ou sistema de controle. Fica desprovida de eficácia e validade a mensagem que contiver vínculos obrigacionais, expedida por quem não detenha poderes de representação. LEGAL ADVICE This message is exclusively destined for the people to whom it is directed, and it can bear private and/or legally exceptional information. If you are not addressee of this message, since now you are advised to not release, copy, distribute, check or, otherwise, use the information contained in this message, because it is illegal. If you received this message by mistake, we ask you to return this email, making possible, as soon as possible, the elimination of its contents of your database, registrations or controls system. The message that bears any mandatory links, issued by someone who has no representation powers, shall be null or void. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Processor Upgrade Question
Good Morning everyone, in July of this year, I asked a question swapping out our 7060 H75 process and getting a new Z systems processor. Some one at that time gave me a name of the company that they deal with where you can purchase the processor from them plus they will do the upgrade of the software and then ship the system to you. I misplaced the name of the company and the email address. If you know what it is they please let me know. Thanks for your help. Frank W Sabo Jr. Giant Eagle Inc. Phone: 412 967-3764 Fax:412 967-6120 Email: [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Upgrading the processor
Steve, The machine that we are running on is a 7060 H75 with 210 MIPS. Frank W Sabo Jr SR. Systems Administrator Phone: 412 967-3764 Fax:412 967-6120 Email: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Thompson, Steve Sent: Monday, July 30, 2007 9:36 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Upgrading the processor -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Richbourg, Claude Sent: Monday, July 30, 2007 8:29 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Upgrading the processor I used to work with an H50. The three models are: The Multiprise 3000 models H30, H50, and H70. Unless there is something new going on here? ;. Claude Richbourg Florida Department of Corrections Systems Programmer III 850-921-1383 Ever hear of an IFL? They were add-ons that came out AFTER the original H30, H50, and H70. Now what that did to the model number is beyond me, because I never worked with those, or had customers that wanted them. And I just realized in an earlier post I was having a typical Monday and was thinking of the entry system at about 60MIPS. I'm expecting an email from a former customer any moment... Later, Steve Thompson -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Upgrading the processor
No it is an H75 processor. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Itschak Mugzach Sent: Monday, July 30, 2007 10:17 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Upgrading the processor And... I think your machine model is H70. Itschak -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Rich Smrcina Sent: Monday, July 30, 2007 3:01 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Upgrading the processor OK, thanks for the update... Mark Jacobs wrote: > Rich Smrcina wrote: >> There may be some savings on z/OS software costs with the new >> hardware as well. Do you require a full blown z/OS? If you can run >> z/OS.e, for instance (it's been renamed recently and I don't recall >> the new name), the savings could be quite significant. >> > The new name of zOSe is NALC (New Application License Charge). I think > that zOSe 1.8 is the last one. > -- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 rich.smrcina at vmassist.com http://www.linkedin.com/in/richsmrcina Catch the WAVV! http://www.wavv.org WAVV 2008 - Chattanooga - April 18-22, 2008 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html __ NOD32 2428 (20070730) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Upgrading the processor
Hello everyone, I have a question to ask of the group. I currently have an IBM7060 H75 processor running OS 390 2.10. We are currently going into our sixth year of a two year phase out of the mainframe. Since everything is non supported management is looking into upgrading the processor to a 2096 R07 (F02) box and operating system to the latest ZOS version, since it now looks like it would be another two to three years before can be converted off. If I can come up with a list of jufitications for upgrading the processor and operating system. The system then might be taken off the endangered species list. 1. SOX hardware and software compliance. 2. All software will be vendor supported. 3. Installation of ZVM which would allow us to run LINUX on the box. 4. All new applications to be considered to on the platform. Thanks for any information that I can get. Frank W Sabo Jr SR. Systems Administrator Phone: 412 967-3764 Fax:412 967-6120 Email: [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Question JQES utilization
We frequently receive the $HASP050 JQES shortage message. *$HASP050 JES2 RESOURCE SHORTAGE OF,JQES,- 90% UTILIZATION REACHED It starts out at 85% and goes up to as high as 92% before going back down. I have done some reading and searching on the subject and found that following commands The JES2 manual talks about the following $D OUTDEF $HASP836 OUTDEF 366 $HASP836 OUTDEF BRODCAST=NO,COPIES=255,DMNDSET=NO,JOENUM=4, $HASP836 JOEFREE=11758,JOEWARN=85,OUTTIME=CREATE, $HASP836 PRTYLOW=0,PRTYHIGH=255,PRTYOUT=NO,PRYORATE=0, $HASP836 SEGLIM=100,STDFORM=STD,USERSET=NO The Archives of IBM-MAIN@BAMA.UA.EDU refers to the following command $DJOBDEF $D JOBDEF $HASP835 JOBDEF 368 $HASP835 JOBDEF ACCTFLD=OPTIONAL,CNVT_ENQ=FAIL,JCLERR=NO, $HASP835 JNUMBASE=7765,JNUMFREE=4958,JNUMWARN=85, $HASP835 JOBFREE=2958,JOBNUM=28000,JOBWARN=85, $HASP835 PRTYHIGH=10,PRTYJECL=YES,PRTYJOB=NO,PRTYLOW=5, $HASP835 PRTYRATE=96,RANGE=(1,3),RASSIGN=YES, $HASP835 DUPL_JOB=DELAY We are currently running OS/390 R.2.10 shared JES2, yes I know I am not supported. The doc states, that to back out this change requires a cold start of JES2. Therefore, I am trying to make sure that by increasing JOBNUM (JQES) does not have any effect on the systems. My question is this which parameter really pertains to the number of JQES in the systems? Do I need to do anyting else with JES2? $T JOBDEF, JOBNUM=n Or $T OUTDEF, , JOBNUM=n Thanks for any help I can get. Frank W Sabo Jr Phone: 412 967-3764 Fax:412 967-6120 Email: [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
$HASP893 STATUS=ACTIVE,COMMAND=(FORMAT)
Hello everyone, I have a question regarding JES2 and spool packs. This morning when I was reviewing spool space because it was filling up over the weekend. I received the following back on the console when doing a $D SPOOL command. I am currently running OS/390 R2.10 $D SPOOL $HASP893 VOLUME(SPL001) STATUS=ACTIVE,PERCENT=69 $HASP893 VOLUME(SPL002) STATUS=ACTIVE,PERCENT=68 $HASP893 VOLUME(SPL003) STATUS=ACTIVE,PERCENT=68 $HASP893 VOLUME(SPL004) STATUS=ACTIVE,PERCENT=68 $HASP893 VOLUME(SPL005) 173 $HASP893 VOLUME(SPL005) STATUS=ACTIVE,COMMAND=(FORMAT), $HASP893 PERCENT=68 $HASP893 VOLUME(SPL006) STATUS=ACTIVE,PERCENT=69 $HASP893 VOLUME(SPL008) STATUS=ACTIVE,PERCENT=68 $HASP893 VOLUME(SPL007) STATUS=ACTIVE,PERCENT=68 $HASP646 68.8112 PERCENT SPOOL UTILIZATION My question is with SPL005 it states that it is active and awaiting a FORMAT command, Do I drain the volume and the pack and it will format itself or is there something else that needs to be done. I have looked back over the past SYSLOG and it has apparently been that way for sometime, not sure how it got that way. Thanks for any help. Frank W Sabo Jr Phone: 412 967-3764 Fax:412 967-6120 Email: [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Dataset copy error with FDR.
RACF Question.
If your RACF Dataset Profile is AUL1$.* then it will only protect
datasets name with only one additional qualifier such as AUL1$.ACSASXP1,
it does not allow multiple dataset qualifiers such as
AUL1$.SAS.FORMATS. You will need to change the profile in RACF to
AUL1$.** to allow access to multiple dataset qualifiers names.
Frank W Sabo Jr
Phone: 412 967-3764
Fax: 412 967-6120
Email: [EMAIL PROTECTED]
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Jasen Kloeppel
Sent: Tuesday, June 20, 2006 11:11 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Dataset copy error with FDR.
Can someone point me in the right direction?
My issue is that I have a user running an FDRCOPY job as follows.
//STEP1EXEC PGM=FDRCOPY
//SYSPRINT DD SYSOUT=*
//SYSUDUMP DD SYSOUT=*
//SYSINDD *
COPY TYPE=DSF,
DSNENQ=NONE
SELECT CATDSN=AUL1.SAS.FORMATS,
NEWNAME=AUL1$.SAS.FORMATS
SELECT CATDSN=AUL1.VSAMPSP1,
NEWNAME=AUL1$.VSAMPSP1
SELECT CATDSN=AUL1.SAS.MACROS,
NEWNAME=AUL1$.SAS.MACROS
/*
The job is failing with the following RACF errors:
ICH408I USER(TSOSDB ) GROUP(TSOUSR ) NAME() 176
AUL1$.SAS.FORMATS CL(DATASET ) VOL(CLN007)
DEFINE - INSUFFICIENT AUTHORITY
ICH408I USER(TSOSDB ) GROUP(TSOUSR ) NAME( ) 178
AUL1$.SAS.MACROS CL(DATASET ) VOL(CLN010)
DEFINE - INSUFFICIENT AUTHORITY
ICH408I USER(TSOSDB ) GROUP(TSOUSR ) NAME( ) 179
AUL1$.VSAMPSP1 CL(DATASET ) VOL(CLN008)
DEFINE - INSUFFICIENT AUTHORITY
IEF450I TSOSDBC STEP1 - ABEND=S000 U0888 REASON= 182
TIME=14.46.05
The user has run this job successfully with the following dataset names:
SELECT CATDSN=AUL1.ACSASXP1,
NEWNAME=AUL1$.ACSASXP1
SELECT CATDSN=AUL1.ACTUAXP1,
NEWNAME=AUL1$.ACTUAXP1
There is a RACF profile AUL1$.* that is protecting these datasets and
the
user has Alter to that profile, I even tried making the profile
UACC(ALTER)
to see if we would get a different result. Is there anything special
about
have a $ in the RACF profile name?
There is something unique about these dataset names, and I am not sure
what
it is. There is not a more specific profile, this is the profile
protecting
these datsets.
Command ===> LD DA('AUL1$.SAS.MACROS') G ALL
INFORMATION FOR DATASET AUL1$.* (G)
YOUR ACCESS CREATION GROUP DATASET TYPE
--- --
ALTERTSOUSR NON-VSAM
I don't see that we are doing anything special in the ACS routines which
would change the way these datasets are handled. In addition I can
allocate
these datasets from 3.2 in ISPF, but when I run the FDRCOPY job I get
the
RACF DEFINE error listed above.
What am I missing? Any suggestions on where else to look?
The FDR Error messages for the job are: The dataset is going from
Non-managed to SMS managed dasd.
FDR101 FAST DUMP RESTORE DATA SET FUNCTIONS - VER. 5.4/50P - INNOVATION
DATA PR
FDR303 CARD IMAGE -- COPY TYPE=DSF,
FDR303 CARD IMAGE --DSNENQ=NONE
FDR303 CARD IMAGE -- SELECT CATDSN=AUL1.SAS.FORMATS,
FDR303 CARD IMAGE --NEWNAME=AUL1$.SAS.FORMATS.TEST
FDR346 FILTER SELECTED 1 ENTRIES IN 0.06 SECS
FDR007 STARTING TIME OF DATA SET COPY-- 09.53.35 -- IN=D#D90089
FDR392 DSF SELECTED DSN=AUL1.SAS.FORMATS
FDR162** SMS ERROR MESSAGES FOR DSN=AUL1$.SAS.FORMATS.TEST
FDR162IGD17012I USER NOT AUTHORIZED TO DEFINE DATA SET
FDR162AUL1$.SAS.FORMATS.TEST
FDR162DADSM HISTORIC RETURN CODE IS 172 DADSM DIAGNOSTIC INFORMATION
IS
040E0800
FDR156** ALLOCATE FAILED FOR 00037 TRK COMP=X'00AC-040E0800' VOL=D90089
DSN=AUL1$.SAS.FORMATS.TEST
FDR326** COPYENDED WITH NO DATA SETS COPIED VOL=D90089
FDR007 ENDING TIME OF DATA SET COPY-- 09.53.36 -- IN=D#D90089
FDR122 BYTES DSK TRK T BLKS RESTART STIMERS ERRS ACT DSK LOW
HGH
DEXCP
FDR122N 00 04000 00
00
FDR998** FDR COMPLETED WITH ERRORS
Thanks for the help,
Jasen Kloeppel
Shelter Insurance
573-214-6506
[EMAIL PROTECTED]
_
Don't just search. Find. Check out the new MSN Search!
http://search.msn.click-url.com/go/onm00200636ave/direct/01/
--
For IBM-MAIN subscribe / signoff / archive access instructions, send
email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search
the archives at http://bama.ua.edu/archives/ibm-main.html
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
Putty connection to mainframe
Hello everyone. I have been requested by my management to use PUTTY as a 3270 emulator on the mainframe instead of rumba as a remote connection over the web access. Does anyone out there using PUTTY to access the mainframe, if so, how? I did use putty to access the test LINUX LPAR that I have up and running. So far I have only been able to connect to TSO and only as a single command line, not any of the ISPF panels. I would appreciate any help I can get. Thanks Frank W Sabo Jr Phone: 412 967-3764 Fax:412 967-6120 Email: [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
TCPXLBIN Table
We are currently running OS/390 2.10. We have a UNIX system that needs to do a FTP process over to the Mainframe, to retrieve the data back onto the UNIX server. But the data has to run through a conversions process to change the HEX characters BA and BB to ASCII 5B and 5D respectfully. I went though and did the convxlat DWFTP.FTP.SEZATCPX(DWHTABLE)' 'DWFTP.FTP.TCPXLBIN' process and created a new translation table. I only want to use this table for this user. If we put the command SITE SBD='DWFTP.FTP.TCPXLBIN' in the UNIX FTP command stream and he data conversion works properly. However the UNIX admin has an FTP script which does FTP's to multiple platforms with the user id of DWFTP. He does not want to have inserted the site command for all the other systems. Is there a way to have MVS systems to automatically use the conversion table for only this user id when they do and FTP process? I have read the manual and have tried several different ways, but none seem to work. I put a DD card //SYSDTSX in the logon proc for the user, but that seems to use the standard conversion table. I created the dataset with the user high level qualifier again that still uses the standard conversion table. I would appreciate any help that I can get. Thanks Frank W Sabo Jr Giant Eagle Inc Phone: 412 967-3764 Fax:412 967-6120 Email: [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
