Re: SPF Panels for TCP/IP (was HSM Query command) - EZANS RFE

2017-08-29 Thread Mike Wawiorko 
It is a purely symbolic point at which IBM might realise that keeping it as 
'uncommitted candidate' rather than meeting the RFE is becoming embarrassing. 

I'm sure you all knew what I meant.

Mike Wawiorko 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Edward Gould
Sent: 28 August 2017 06:07
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SPF Panels for TCP/IP (was HSM Query command) - EZANS RFE


This mail originated from outside our organisation - edgould1...@comcast.net

> On Aug 27, 2017, at 5:10 PM, Ed Jaffe <edja...@phoenixsoftware.com> wrote:
> 
> On 8/23/2017 1:27 AM, Mike Wawiorko wrote:
>> This is my RFE.
>> 
>> Currently 75 votes supporting it but only uncommitted candidate.
>> Can we get it to over a hundred votes?
> 
> What happens when you reach 100 votes?
> 
> —

He gets a lollipop.

Ed
--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

This e-mail and any attachments are confidential and intended solely for the 
addressee and may also be privileged or exempt from disclosure under applicable 
law. If you are not the addressee, or have received this e-mail in error, 
please notify the sender immediately, delete it from your system and do not 
copy, disclose or otherwise act upon any part of this e-mail or its attachments.

Internet communications are not guaranteed to be secure or virus-free. The 
Barclays Group does not accept responsibility for any loss arising from 
unauthorised access to, or interference with, any Internet communications by 
any third party, or from the transmission of any viruses. Replies to this 
e-mail may be monitored by the Barclays Group for operational or business 
reasons.

Any opinion or other information in this e-mail or its attachments that does 
not relate to the business of the Barclays Group is personal to the sender and 
is not given or endorsed by the Barclays Group.

Barclays Bank PLC. Registered in England and Wales (registered no. 1026167). 
Registered Office: 1 Churchill Place, London, E14 5HP, United Kingdom. 

Barclays Bank PLC is authorised by the Prudential Regulation Authority and 
regulated by the Financial Conduct Authority and the Prudential Regulation 
Authority (Financial Services Register No. 122702).

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: SPF Panels for TCP/IP (was HSM Query command) - EZANS RFE

2017-08-27 Thread Edward Gould 
> On Aug 27, 2017, at 5:10 PM, Ed Jaffe  wrote:
> 
> On 8/23/2017 1:27 AM, Mike Wawiorko wrote:
>> This is my RFE.
>> 
>> Currently 75 votes supporting it but only uncommitted candidate.
>> Can we get it to over a hundred votes?
> 
> What happens when you reach 100 votes?
> 
> — 

He gets a lollipop.

Ed
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: SPF Panels for TCP/IP (was HSM Query command) - EZANS RFE

2017-08-27 Thread Ed Jaffe 

On 8/23/2017 1:27 AM, Mike Wawiorko wrote:

This is my RFE.

Currently 75 votes supporting it but only uncommitted candidate.
Can we get it to over a hundred votes?


What happens when you reach 100 votes?

--
Phoenix Software International
Edward E. Jaffe
Chief Technology Officer
831 Parkview Drive North
El Segundo, CA 90245
http://www.phoenixsoftware.com/

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: SPF Panels for TCP/IP (was HSM Query command) - EZANS RFE

2017-08-23 Thread Cieri, Anthony 

Thanks for the RFE #

Up to 77 votes!!!

Tony 



-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Mike Wawiorko
Sent: Wednesday, August 23, 2017 4:28 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SPF Panels for TCP/IP (was HSM Query command) - EZANS RFE

This is my RFE.

Currently 75 votes supporting it but only uncommitted candidate. 
Can we get it to over a hundred votes?

Headline:
Support EZANS as part of z/OS Communications Server

ID:
59073

Mike Wawiorko   

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Cieri, Anthony
Sent: 22 August 2017 20:47
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: SPF Panels for TCP/IP (was HSM Query command)


This mail originated from outside our organisation - aci...@seic.com


Sorry for the segue into a new thread, but.

There is a SPF Utility that basically provides a full screen ISPF 
interface to the NETSTAT command. It can be found at the following url:

http://www-01.ibm.com/support/docview.wss?uid=swg24029203

It is called the IBM z/OS Communications Server Network Utility 
Assistant.  It is a pretty neat little tool. I am not sure of the support 
status for it. I believe that "as is",  it stopped working around z/OS V1.13. 
However, the changes necessary to make it functional again, are only required 
in the Rexx code that determine the z/OS System level and are relatively minor. 
I also believe that there is an RFE that is requesting formal support from IBM. 
I don't know the status or the RFE number.

I am currently running z/OS V2.1 and have this operating sufficiently 
in our environment. 

Hth
Tony



-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Elardus Engelbrecht
Sent: Tuesday, August 22, 2017 7:41 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: HSM Query command

Radoslaw Skorupka wrote:

>That remains me a fundamental question: WHY DFHSM DOES NOT HAVE ISPF PANELS?

HSM is more of a background thing. Perhaps you should say what functions 
(status of MCDS, BCDS, active processes, hold/release HSM actions, etc.) you 
want to see in ISPF panels (or I prefer, in ISMF)?


>Wouldn't it be nice to have some entry in ISMF like RMM has?

It would be really nice, I agree. 


>There are two components which lack panels: VTAM and HSM.

Netview (separate product of course) has panels which you can use to manage 
your VTAM network.

I would also prefer to see some panels (or webpages) doing the same for TCP/IP.

I can dream about such gems,... ;-)
Perhaps if you can submit a good reason/excuse, big blue may listen to you...

Groete / Greetings
Elardus Engelbrecht

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

This e-mail and any attachments are confidential and intended solely for the 
addressee and may also be privileged or exempt from disclosure under applicable 
law. If you are not the addressee, or have received this e-mail in error, 
please notify the sender immediately, delete it from your system and do not 
copy, disclose or otherwise act upon any part of this e-mail or its attachments.

Internet communications are not guaranteed to be secure or virus-free. The 
Barclays Group does not accept responsibility for any loss arising from 
unauthorised access to, or interference with, any Internet communications by 
any third party, or from the transmission of any viruses. Replies to this 
e-mail may be monitored by the Barclays Group for operational or business 
reasons.

Any opinion or other information in this e-mail or its attachments that does 
not relate to the business of the Barclays Group is personal to the sender and 
is not given or endorsed by the Barclays Group.

Barclays Bank PLC. Registered in England and Wales (registered no. 1026167). 
Registered Office: 1 Churchill Place, London, E14 5HP, United Kingdom. 

Barclays Bank PLC is authorised by the Prudential Regulation Authority and 
regulated by the Financial Conduct Authority and the Prudential Regulation 
Authority (Financial Services Register No. 122702).

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: SPF Panels for TCP/IP (was HSM Query command)

2017-08-23 Thread Edward Finnell 
He's still maintaining the unofficial IBM-Main FAQ too. 
 
 
In a message dated 8/23/2017 3:19:04 A.M. Central Daylight Time,  
elardus.engelbre...@sita.co.za writes:

I'm  familiar with these nice and useful  site.


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: SPF Panels for TCP/IP (was HSM Query command) - EZANS RFE

2017-08-23 Thread Mike Wawiorko 
This is my RFE.

Currently 75 votes supporting it but only uncommitted candidate. 
Can we get it to over a hundred votes?

Headline:
Support EZANS as part of z/OS Communications Server

ID:
59073

Mike Wawiorko   

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Cieri, Anthony
Sent: 22 August 2017 20:47
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: SPF Panels for TCP/IP (was HSM Query command)


This mail originated from outside our organisation - aci...@seic.com


Sorry for the segue into a new thread, but.

There is a SPF Utility that basically provides a full screen ISPF 
interface to the NETSTAT command. It can be found at the following url:

http://www-01.ibm.com/support/docview.wss?uid=swg24029203

It is called the IBM z/OS Communications Server Network Utility 
Assistant.  It is a pretty neat little tool. I am not sure of the support 
status for it. I believe that "as is",  it stopped working around z/OS V1.13. 
However, the changes necessary to make it functional again, are only required 
in the Rexx code that determine the z/OS System level and are relatively minor. 
I also believe that there is an RFE that is requesting formal support from IBM. 
I don't know the status or the RFE number.

I am currently running z/OS V2.1 and have this operating sufficiently 
in our environment. 

Hth
Tony



-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Elardus Engelbrecht
Sent: Tuesday, August 22, 2017 7:41 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: HSM Query command

Radoslaw Skorupka wrote:

>That remains me a fundamental question: WHY DFHSM DOES NOT HAVE ISPF PANELS?

HSM is more of a background thing. Perhaps you should say what functions 
(status of MCDS, BCDS, active processes, hold/release HSM actions, etc.) you 
want to see in ISPF panels (or I prefer, in ISMF)?


>Wouldn't it be nice to have some entry in ISMF like RMM has?

It would be really nice, I agree. 


>There are two components which lack panels: VTAM and HSM.

Netview (separate product of course) has panels which you can use to manage 
your VTAM network.

I would also prefer to see some panels (or webpages) doing the same for TCP/IP.

I can dream about such gems,... ;-)
Perhaps if you can submit a good reason/excuse, big blue may listen to you...

Groete / Greetings
Elardus Engelbrecht

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

This e-mail and any attachments are confidential and intended solely for the 
addressee and may also be privileged or exempt from disclosure under applicable 
law. If you are not the addressee, or have received this e-mail in error, 
please notify the sender immediately, delete it from your system and do not 
copy, disclose or otherwise act upon any part of this e-mail or its attachments.

Internet communications are not guaranteed to be secure or virus-free. The 
Barclays Group does not accept responsibility for any loss arising from 
unauthorised access to, or interference with, any Internet communications by 
any third party, or from the transmission of any viruses. Replies to this 
e-mail may be monitored by the Barclays Group for operational or business 
reasons.

Any opinion or other information in this e-mail or its attachments that does 
not relate to the business of the Barclays Group is personal to the sender and 
is not given or endorsed by the Barclays Group.

Barclays Bank PLC. Registered in England and Wales (registered no. 1026167). 
Registered Office: 1 Churchill Place, London, E14 5HP, United Kingdom. 

Barclays Bank PLC is authorised by the Prudential Regulation Authority and 
regulated by the Financial Conduct Authority and the Prudential Regulation 
Authority (Financial Services Register No. 122702).

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: SPF Panels for TCP/IP (was HSM Query command)

2017-08-23 Thread Elardus Engelbrecht 
Edward Finnell wrote:

>Dave Alcock heard you 17 yrs ago!

>http://planetmvs.com/

I'm familiar with these nice and useful site.

And I see a new photo with a car with the number plate: BR 14  (with a very 
cool statement: 'No Statements flagged in this Assembly')

I also like this new quote: 'What... is the paging velocity of an unladen MVS 
system?'  ;-D

... and lastly this last tip: "Ask your doctor if Planet MVS is right for you." 
 

Bye Is it now Friday after that eclipse over america two days ago?

Groete / Greetings
Elardus Engelbrecht

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: SPF Panels for TCP/IP (was HSM Query command)

2017-08-22 Thread Edward Finnell 
Dave Alcock heard you 17 yrs ago!
 
http://planetmvs.com/
 
 
In a message dated 8/22/2017 2:47:19 P.M. Central Daylight Time,  
aci...@seic.com writes:

I would  also prefer to see some panels (or webpages) doing the same for  
TCP/IP.

I can dream about such gems,... ;-)
Perhaps if you can  submit a good reason/excuse, big blue may listen to  
you...



--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

SPF Panels for TCP/IP (was HSM Query command)

2017-08-22 Thread Cieri, Anthony 

Sorry for the segue into a new thread, but.

There is a SPF Utility that basically provides a full screen ISPF 
interface to the NETSTAT command. It can be found at the following url:

http://www-01.ibm.com/support/docview.wss?uid=swg24029203

It is called the IBM z/OS Communications Server Network Utility 
Assistant.  It is a pretty neat little tool. I am not sure of the support 
status for it. I believe that "as is",  it stopped working around z/OS V1.13. 
However, the changes necessary to make it functional again, are only required 
in the Rexx code that determine the z/OS System level and are relatively minor. 
I also believe that there is an RFE that is requesting formal support from IBM. 
I don't know the status or the RFE number.

I am currently running z/OS V2.1 and have this operating sufficiently 
in our environment. 

Hth
Tony



-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Elardus Engelbrecht
Sent: Tuesday, August 22, 2017 7:41 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: HSM Query command

Radoslaw Skorupka wrote:

>That remains me a fundamental question: WHY DFHSM DOES NOT HAVE ISPF PANELS?

HSM is more of a background thing. Perhaps you should say what functions 
(status of MCDS, BCDS, active processes, hold/release HSM actions, etc.) you 
want to see in ISPF panels (or I prefer, in ISMF)?


>Wouldn't it be nice to have some entry in ISMF like RMM has?

It would be really nice, I agree. 


>There are two components which lack panels: VTAM and HSM.

Netview (separate product of course) has panels which you can use to manage 
your VTAM network.

I would also prefer to see some panels (or webpages) doing the same for TCP/IP.

I can dream about such gems,... ;-)
Perhaps if you can submit a good reason/excuse, big blue may listen to you...

Groete / Greetings
Elardus Engelbrecht

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: HSM Query command

2017-08-22 Thread Elardus Engelbrecht 
Radoslaw Skorupka wrote:

>That remains me a fundamental question: WHY DFHSM DOES NOT HAVE ISPF PANELS?

HSM is more of a background thing. Perhaps you should say what functions 
(status of MCDS, BCDS, active processes, hold/release HSM actions, etc.) you 
want to see in ISPF panels (or I prefer, in ISMF)?


>Wouldn't it be nice to have some entry in ISMF like RMM has?

It would be really nice, I agree. 


>There are two components which lack panels: VTAM and HSM.

Netview (separate product of course) has panels which you can use to manage 
your VTAM network.

I would also prefer to see some panels (or webpages) doing the same for TCP/IP.

I can dream about such gems,... ;-)  
Perhaps if you can submit a good reason/excuse, big blue may listen to you...

Groete / Greetings
Elardus Engelbrecht

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: HSM Query command

2017-08-22 Thread Richards, Robert B. 
Agreed, but it is possible to RYO. I had access to a homegrown version 25 years 
ago in Saudi Arabia.

As to the current question by the OP, why not use some REXX code to issue and 
trap a console command's output? Then write it out to a temp dsn using LM 
services that you can browse or edit.

 All you need to do is pass the following to that code and you will have your 
information: F DFHSM,QUERY whatever

Bob 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of R.S.
Sent: Tuesday, August 22, 2017 6:19 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: HSM Query command

That remains me a fundamental question:
WHY DFHSM DOES NOT HAVE ISPF PANELS?
Wouldn't it be nice to have some entry in ISMF like RMM has?

There are two components which lack panels: VTAM and HSM.

-- 
Radoslaw Skorupka
Lodz, Poland




==


--
 Treść tej wiadomości może zawierać informacje prawnie chronione Banku 
przeznaczone wyłącznie do użytku służbowego adresata. Odbiorcą może być jedynie 
jej adresat z wyłączeniem dostępu osób trzecich. Jeżeli nie jesteś adresatem 
niniejszej wiadomości lub pracownikiem upoważnionym do jej przekazania 
adresatowi, informujemy, że jej rozpowszechnianie, kopiowanie, rozprowadzanie 
lub inne działanie o podobnym charakterze jest prawnie zabronione i może być 
karalne. Jeżeli otrzymałeś tę wiadomość omyłkowo, prosimy niezwłocznie 
zawiadomić nadawcę wysyłając odpowiedź oraz trwale usunąć tę wiadomość 
włączając w to wszelkie jej kopie wydrukowane lub zapisane na dysku.

 This e-mail may contain legally privileged information of the Bank and is 
intended solely for business use of the addressee. This e-mail may only be 
received by the addressee and may not be disclosed to any third parties. If you 
are not the intended addressee of this e-mail or the employee authorized to 
forward it to the addressee, be advised that any dissemination, copying, 
distribution or any other similar activity is legally prohibited and may be 
punishable. If you received this e-mail by mistake please advise the sender 
immediately by using the reply facility in your e-mail software and delete 
permanently this e-mail including any copies of it either printed or saved to 
hard drive.

 mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 Warszawa, 
www.mBank.pl, e-mail: kont...@mbank.plsąd Rejonowy dla m. st. Warszawy XII 
Wydział Gospodarczy Krajowego Rejestru Sądowego, nr rejestru przedsiębiorców 
KRS 025237, NIP: 526-021-50-88. Według stanu na dzień 01.01.2016 r. kapitał 
zakładowy mBanku S.A. (w całości wpłacony) wynosi 168.955.696 złotych.


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: HSM Query command

2017-08-22 Thread R.S. 

That remains me a fundamental question:
WHY DFHSM DOES NOT HAVE ISPF PANELS?
Wouldn't it be nice to have some entry in ISMF like RMM has?

There are two components which lack panels: VTAM and HSM.

--
Radoslaw Skorupka
Lodz, Poland




==


   --
Treść tej wiadomości może zawierać informacje prawnie chronione Banku 
przeznaczone wyłącznie do użytku służbowego adresata. Odbiorcą może być jedynie 
jej adresat z wyłączeniem dostępu osób trzecich. Jeżeli nie jesteś adresatem 
niniejszej wiadomości lub pracownikiem upoważnionym do jej przekazania 
adresatowi, informujemy, że jej rozpowszechnianie, kopiowanie, rozprowadzanie 
lub inne działanie o podobnym charakterze jest prawnie zabronione i może być 
karalne. Jeżeli otrzymałeś tę wiadomość omyłkowo, prosimy niezwłocznie 
zawiadomić nadawcę wysyłając odpowiedź oraz trwale usunąć tę wiadomość 
włączając w to wszelkie jej kopie wydrukowane lub zapisane na dysku.

This e-mail may contain legally privileged information of the Bank and is 
intended solely for business use of the addressee. This e-mail may only be 
received by the addressee and may not be disclosed to any third parties. If you 
are not the intended addressee of this e-mail or the employee authorized to 
forward it to the addressee, be advised that any dissemination, copying, 
distribution or any other similar activity is legally prohibited and may be 
punishable. If you received this e-mail by mistake please advise the sender 
immediately by using the reply facility in your e-mail software and delete 
permanently this e-mail including any copies of it either printed or saved to 
hard drive.

mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 Warszawa, 
www.mBank.pl, e-mail: kont...@mbank.plsąd Rejonowy dla m. st. Warszawy XII 
Wydział Gospodarczy Krajowego Rejestru Sądowego, nr rejestru przedsiębiorców 
KRS 025237, NIP: 526-021-50-88. Według stanu na dzień 01.01.2016 r. kapitał 
zakładowy mBanku S.A. (w całości wpłacony) wynosi 168.955.696 złotych.
   


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: HSM Query command

2017-08-21 Thread David Crayford 

On 22/08/2017 3:55 AM, Wayne Bickerdike wrote:

Use the OUTTRAP command in a batch REXX program to direct the output to
stem variable and print the stem contents.


IIRC, that won't work. DFHSM doesn't use PUTLINE for terminal output.



On Tue, Aug 22, 2017 at 5:35 AM, Jeseritz, Tommy W 
wrote:


How do I write the output of the 'hsend q cds' to a dataset for our metric
reporting.

Query does not have the option to do a ODS('output.dsn.name') so was
wondering for our reporting, we want to automate this in a batch job.
If anyone has any idea's , please let me know.  I have tried sdsf batch
but have not been successful.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN






--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: HSM Query command

2017-08-21 Thread Ron hesketh 
HI ,
I use the following rexx exec ,  ZCOMMAND would be   'F HSM,Q CDS'
It uses Gilbert Stflours excellent STEMVIEW to display the output, that 
could easily be replaced
with an execio. 

Regards,
Ron

/* rexx */ 
 
parse upper arg ZCOMMAND 
 
IsfRC = isfcalls( "ON" ) 
if IsfRC <> 0 
then do 
   say "RC" IsfRC "returned from isfcalls( ON )" 
   exit IsfRC 
end 
ISFCONS = '' 
ISFDELAY = 5 
address SDSF "ISFEXEC '/"strip(ZCOMMAND,B,'"')||"' " 
if RC <> 0 then do 
   say "RC" RC "returned from ZCOMMAND " 
   call DisplayMessages 
end 
 
/* Display the user log associated with the action */ 
 
do i = 1 to isfulog.0 
   cmd.i =  substr(isfulog.i,43,80) 
end 
 
XTITLE = ZCOMMAND 
Call STEMVIEW  'BROWSE','cmd.',,,'Command output','DBPIRLMA' 
 
/* Unload the SDSF environment */ 
 
call isfcalls "OFF" 
 
exit 0 

/* Display the messages associated with the action */ 
 
DisplayMessages: 
 say "isfmsg: '"isfmsg"'" 
 say isfmsg2.0 "long messages in the isfmsg2 stem:" 
 do i = 1 to isfmsg2.0 
say " '"isfmsg2.i"'" 
 end 
return  




From:   Brian Fraser <brianmfra...@gmail.com>
To: IBM-MAIN@LISTSERV.UA.EDU, 
Date:   22/08/2017 11:20 AM
Subject:Re: HSM Query command
Sent by:IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU>



OUTDATASET(xxx..) is not a valid parameter to HSEND QUERY.

Even in  a TSO in batch job, the output will be returned to your TSO 
screen
and not sent to the SYSTSPRT DD.

I guess it just uses TPUT.

Regards
Brian

On Tue, Aug 22, 2017 at 4:00 AM, Carmen Vitullo <cvitu...@hughes.net> 
wrote:

> something like
>
> //STEP2 EXEC PGM=IKJEFT01,TIME=2,REGION=4096K
> //SYSTSPRT DD SYSOUT=*
> //VTOCOUT DD SYSOUT=*
> //MSGPRINT DD SYSOUT=*
> //SYSPRINT DD SYSOUT=*
> //SYSTSIN DD *
> HSEND LIST TTOC OUTDATASET(xxx.HSM.TTOC.ML2LIST) SELECT(ML2)
> - Original Message -
>
> From: "Tommy W Jeseritz" <tommy_jeser...@uhc.com>
> To: IBM-MAIN@LISTSERV.UA.EDU
> Sent: Monday, August 21, 2017 2:35:33 PM
> Subject: HSM Query command
>
> How do I write the output of the 'hsend q cds' to a dataset for our 
metric
> reporting.
>
> Query does not have the option to do a ODS('output.dsn.name') so was
> wondering for our reporting, we want to automate this in a batch job.
> If anyone has any idea's , please let me know. I have tried sdsf batch 
but
> have not been successful.
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__

___

This email has been scanned by the Bankwest Email Security System.
___


___
Unencrypted electronic mail is not secure and may not be authentic.
If you have any doubts as to the contents please telephone to confirm.

This electronic transmission including any attachments is intended only
for those to whom it is addressed. It may contain copyright material or
information that is confidential, privileged or exempt from disclosure by law.
Any claim to privilege is not waived or lost by reason of mistaken transmission
of this information. If you are not the intended recipient you must not
distribute or copy this transmission and should please notify the sender.
Your costs for doing this will be reimbursed by the sender.

We do not accept liability in connection with computer virus, data corruption,
delay, interruption, unauthorised access or unauthorised amendment.
___


__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: HSM Query command

2017-08-21 Thread Brian Fraser 
OUTDATASET(xxx..) is not a valid parameter to HSEND QUERY.

Even in  a TSO in batch job, the output will be returned to your TSO screen
and not sent to the SYSTSPRT DD.

I guess it just uses TPUT.

Regards
Brian

On Tue, Aug 22, 2017 at 4:00 AM, Carmen Vitullo <cvitu...@hughes.net> wrote:

> something like
>
> //STEP2 EXEC PGM=IKJEFT01,TIME=2,REGION=4096K
> //SYSTSPRT DD SYSOUT=*
> //VTOCOUT DD SYSOUT=*
> //MSGPRINT DD SYSOUT=*
> //SYSPRINT DD SYSOUT=*
> //SYSTSIN DD *
> HSEND LIST TTOC OUTDATASET(xxx.HSM.TTOC.ML2LIST) SELECT(ML2)
> - Original Message -
>
> From: "Tommy W Jeseritz" <tommy_jeser...@uhc.com>
> To: IBM-MAIN@LISTSERV.UA.EDU
> Sent: Monday, August 21, 2017 2:35:33 PM
> Subject: HSM Query command
>
> How do I write the output of the 'hsend q cds' to a dataset for our metric
> reporting.
>
> Query does not have the option to do a ODS('output.dsn.name') so was
> wondering for our reporting, we want to automate this in a batch job.
> If anyone has any idea's , please let me know. I have tried sdsf batch but
> have not been successful.
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: HSM Query command

2017-08-21 Thread Steve Beaver 
Do you know rexx?

Steve 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Carmen Vitullo
Sent: Monday, August 21, 2017 2:58 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: HSM Query command

If batch processing, I'd guess you're using IKJEFT01 , I think the output 
should write to SYSTSPRT ? 
Carmen 

- Original Message -

From: "Tommy W Jeseritz" <tommy_jeser...@uhc.com>
To: IBM-MAIN@LISTSERV.UA.EDU
Sent: Monday, August 21, 2017 2:35:33 PM
Subject: HSM Query command 

How do I write the output of the 'hsend q cds' to a dataset for our metric 
reporting. 

Query does not have the option to do a ODS('output.dsn.name') so was wondering 
for our reporting, we want to automate this in a batch job. 
If anyone has any idea's , please let me know. I have tried sdsf batch but have 
not been successful. 

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN 


--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: HSM Query command

2017-08-21 Thread Carmen Vitullo 
something like 

//STEP2 EXEC PGM=IKJEFT01,TIME=2,REGION=4096K 
//SYSTSPRT DD SYSOUT=* 
//VTOCOUT DD SYSOUT=* 
//MSGPRINT DD SYSOUT=* 
//SYSPRINT DD SYSOUT=* 
//SYSTSIN DD * 
HSEND LIST TTOC OUTDATASET(xxx.HSM.TTOC.ML2LIST) SELECT(ML2) 
- Original Message -

From: "Tommy W Jeseritz" <tommy_jeser...@uhc.com> 
To: IBM-MAIN@LISTSERV.UA.EDU 
Sent: Monday, August 21, 2017 2:35:33 PM 
Subject: HSM Query command 

How do I write the output of the 'hsend q cds' to a dataset for our metric 
reporting. 

Query does not have the option to do a ODS('output.dsn.name') so was wondering 
for our reporting, we want to automate this in a batch job. 
If anyone has any idea's , please let me know. I have tried sdsf batch but have 
not been successful. 

-- 
For IBM-MAIN subscribe / signoff / archive access instructions, 
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN 


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: HSM Query command

2017-08-21 Thread Carmen Vitullo 
If batch processing, I'd guess you're using IKJEFT01 , I think the output 
should write to SYSTSPRT ? 
Carmen 

- Original Message -

From: "Tommy W Jeseritz" <tommy_jeser...@uhc.com> 
To: IBM-MAIN@LISTSERV.UA.EDU 
Sent: Monday, August 21, 2017 2:35:33 PM 
Subject: HSM Query command 

How do I write the output of the 'hsend q cds' to a dataset for our metric 
reporting. 

Query does not have the option to do a ODS('output.dsn.name') so was wondering 
for our reporting, we want to automate this in a batch job. 
If anyone has any idea's , please let me know. I have tried sdsf batch but have 
not been successful. 

-- 
For IBM-MAIN subscribe / signoff / archive access instructions, 
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN 


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: HSM Query command

2017-08-21 Thread Wayne Bickerdike 
Use the OUTTRAP command in a batch REXX program to direct the output to
stem variable and print the stem contents.

On Tue, Aug 22, 2017 at 5:35 AM, Jeseritz, Tommy W 
wrote:

> How do I write the output of the 'hsend q cds' to a dataset for our metric
> reporting.
>
> Query does not have the option to do a ODS('output.dsn.name') so was
> wondering for our reporting, we want to automate this in a batch job.
> If anyone has any idea's , please let me know.  I have tried sdsf batch
> but have not been successful.
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>



-- 
Wayne V. Bickerdike

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

HSM Query command

2017-08-21 Thread Jeseritz, Tommy W 
How do I write the output of the 'hsend q cds' to a dataset for our metric 
reporting.

Query does not have the option to do a ODS('output.dsn.name') so was wondering 
for our reporting, we want to automate this in a batch job.
If anyone has any idea's , please let me know.  I have tried sdsf batch but 
have not been successful.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN