Re: Configuring a CP online [EXTERNAL]

2020-07-09 Thread R.S. 

Yes. I general there are many choices:
1. Re-Activate LPAR profile. Of course change it before.
2. Use command (human or COMMNDxx) to CF CPU online.
3. Use Jim Mulder advice (PRESCPU).
4. Logically add CPU to the LPAR using HMC facilities (z10 or above).

Assuming the IPL is human-controlled (not automatic) I would add to the 
procedure to check CPUs after MVS console is available.


--
Radoslaw Skorupka
Lodz, Poland






W dniu 09.07.2020 o 10:12, kekronbekron pisze:

I may be incorrect, but isn't the image profile to say this image is allowed to 
have these many CPs?
Or is it also supposed to bring it online ...
If not, adding it to COMMND00 should be enough

- KB

‐‐‐ Original Message ‐‐‐
On Thursday, July 9, 2020 12:32 AM, Mark Jacobs 
<0224d287a4b1-dmarc-requ...@listserv.ua.edu> wrote:


Yes, the Image profile needs to be updated for number of CPs to be brought 
online during IPL.

Mark Jacobs

Sent from ProtonMail, Swiss-based encrypted email.

GPG Public Key - 
https://api.protonmail.ch/pks/lookup?op=get=markjac...@protonmail.com

‐‐‐ Original Message ‐‐‐
On Wednesday, July 8, 2020 2:46 PM, Feller, Paul 
02fc94e14c43-dmarc-requ...@listserv.ua.edu wrote:


If this CP is to be online from now on then update the lpar hardware profile to 
insure that it will be there after any deactivate/activate of the lpar. In the 
back of my mind I'm thinking during the IPL process the system looks at the 
profile to see what number of CPs should be online. I could be wrong, but I 
keep thinking I've run into the same situation and updating the profile fixed 
the issue.
Thanks..
Paul Feller
GTS Mainframe Technical Support




==

Jeśli nie jesteś adresatem tej wiadomości:

- powiadom nas o tym w mailu zwrotnym (dziękujemy!),
- usuń trwale tę wiadomość (i wszystkie kopie, które wydrukowałeś lub zapisałeś 
na dysku).
Wiadomość ta może zawierać chronione prawem informacje, które może wykorzystać 
tylko adresat.Przypominamy, że każdy, kto rozpowszechnia (kopiuje, rozprowadza) 
tę wiadomość lub podejmuje podobne działania, narusza prawo i może podlegać 
karze.

mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 
Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. Sąd Rejonowy dla m. st. 
Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, KRS 025237, 
NIP: 526-021-50-88. Kapitał zakładowy (opłacony w całości) według stanu na 
01.01.2020 r. wynosi 169.401.468 złotych.

If you are not the addressee of this message:

- let us know by replying to this e-mail (thank you!),
- delete this message permanently (including all the copies which you have 
printed out or saved).
This message may contain legally protected information, which may be used 
exclusively by the addressee.Please be reminded that anyone who disseminates 
(copies, distributes) this message or takes any similar action, violates the 
law and may be penalised.

mBank S.A. with its registered office in Warsaw, ul. Senatorska 18, 00-950 
Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. District Court for the Capital 
City of Warsaw, 12th Commercial Division of the National Court Register, KRS 
025237, NIP: 526-021-50-88. Fully paid-up share capital amounting to PLN 
169.401.468 as at 1 January 2020.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Configuring a CP online

2020-07-09 Thread Allan Staller 
You need to deactivate/reactivate the LPAR (@ HMC) after configuring the image 
profile as desired. This is more than an IPL..

-Original Message-
From: IBM Mainframe Discussion List  On Behalf Of 
Jesse 1 Robinson
Sent: Wednesday, July 8, 2020 5:41 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Configuring a CP online

[CAUTION: This Email is from outside the Organization. Unless you trust the 
sender, Don’t click links or open attachments as it may be a Phishing email, 
which can steal your Information and compromise your Computer.]

OK, based on advice here, we'll schedule an LPAR bounce at the next IPL. Thanks!

.
.
J.O.Skip Robinson
Southern California Edison Company
Electric Dragon Team Paddler
SHARE MVS Program Co-Manager
323-715-0595 Mobile
626-543-6132 Office ⇐=== NEW
robin...@sce.com

-Original Message-
From: IBM Mainframe Discussion List  On Behalf Of 
Mark Jacobs
Sent: Wednesday, July 8, 2020 12:02 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: (External):Re: Configuring a CP online [EXTERNAL]

CAUTION EXTERNAL EMAIL

Yes, the Image profile needs to be updated for number of CPs to be brought 
online during IPL.

Mark Jacobs

Sent from ProtonMail, Swiss-based encrypted email.

GPG Public Key - 
https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fapi.protonmail.ch%2Fpks%2Flookup%3Fop%3Dget%26search%3Dmarkjacobs%40protonmail.comdata=02%7C01%7Callan.staller%40HCL.COM%7Cdc0d6c6ab0b74abace2f08d823900a40%7C189de737c93a4f5a8b686f4ca9941912%7C0%7C0%7C637298448855932133sdata=tIf7SJrQIPW6MGd276jXhszcupUIBoi0kqlTrTW4LEw%3Dreserved=0

‐‐‐ Original Message ‐‐‐
On Wednesday, July 8, 2020 2:46 PM, Feller, Paul 
<02fc94e14c43-dmarc-requ...@listserv.ua.edu> wrote:

> If this CP is to be online from now on then update the lpar hardware profile 
> to insure that it will be there after any deactivate/activate of the lpar. In 
> the back of my mind I'm thinking during the IPL process the system looks at 
> the profile to see what number of CPs should be online. I could be wrong, but 
> I keep thinking I've run into the same situation and updating the profile 
> fixed the issue.
>
> Thanks..
>
> Paul Feller
> GTS Mainframe Technical Support
>
> -Original Message-
> From: IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU On Behalf
> Of Jesse 1 Robinson
> Sent: Wednesday, July 08, 2020 1:33 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Configuring a CP online [EXTERNAL]
>
> We added a logical CP a while back via CF online. After the next IPL, it was 
> offline until we reissued the CF command. What do we have to do to make it 
> 'permanent'?
>
> .
> .
> J.O.Skip Robinson
> Southern California Edison Company
> Electric Dragon Team Paddler
> SHARE MVS Program Co-Manager
> 323-715-0595 Mobile
> 626-543-6132 Office <= NEW
> robinsj2@sce.commailto:robin...@sce.com
>

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN
::DISCLAIMER::

The contents of this e-mail and any attachment(s) are confidential and intended 
for the named recipient(s) only. E-mail transmission is not guaranteed to be 
secure or error-free as information could be intercepted, corrupted, lost, 
destroyed, arrive late or incomplete, or may contain viruses in transmission. 
The e mail and its contents (with or without referred errors) shall therefore 
not attach any liability on the originator or HCL or its affiliates. Views or 
opinions, if any, presented in this email are solely those of the author and 
may not necessarily reflect the views or opinions of HCL or its affiliates. Any 
form of reproduction, dissemination, copying, disclosure, modification, 
distribution and / or publication of this message without the prior written 
consent of authorized representative of HCL is strictly prohibited. If you have 
received this email in error please delete it and notify the sender 
immediately. Before opening any email and/or attachments, please check them for 
viruses and other defects.


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Configuring a CP online [EXTERNAL]

2020-07-09 Thread kekronbekron 
I may be incorrect, but isn't the image profile to say this image is allowed to 
have these many CPs?
Or is it also supposed to bring it online ...
If not, adding it to COMMND00 should be enough

- KB

‐‐‐ Original Message ‐‐‐
On Thursday, July 9, 2020 12:32 AM, Mark Jacobs 
<0224d287a4b1-dmarc-requ...@listserv.ua.edu> wrote:

> Yes, the Image profile needs to be updated for number of CPs to be brought 
> online during IPL.
>
> Mark Jacobs
>
> Sent from ProtonMail, Swiss-based encrypted email.
>
> GPG Public Key - 
> https://api.protonmail.ch/pks/lookup?op=get=markjac...@protonmail.com
>
> ‐‐‐ Original Message ‐‐‐
> On Wednesday, July 8, 2020 2:46 PM, Feller, Paul 
> 02fc94e14c43-dmarc-requ...@listserv.ua.edu wrote:
>
> > If this CP is to be online from now on then update the lpar hardware 
> > profile to insure that it will be there after any deactivate/activate of 
> > the lpar. In the back of my mind I'm thinking during the IPL process the 
> > system looks at the profile to see what number of CPs should be online. I 
> > could be wrong, but I keep thinking I've run into the same situation and 
> > updating the profile fixed the issue.
> > Thanks..
> > Paul Feller
> > GTS Mainframe Technical Support
> > -Original Message-
> > From: IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU On Behalf Of 
> > Jesse 1 Robinson
> > Sent: Wednesday, July 08, 2020 1:33 PM
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Subject: Configuring a CP online [EXTERNAL]
> > We added a logical CP a while back via CF online. After the next IPL, it 
> > was offline until we reissued the CF command. What do we have to do to make 
> > it 'permanent'?
> > .
> > .
> > J.O.Skip Robinson
> > Southern California Edison Company
> > Electric Dragon Team Paddler
> > SHARE MVS Program Co-Manager
> > 323-715-0595 Mobile
> > 626-543-6132 Office <= NEW
> > robinsj2@sce.commailto:robin...@sce.com
> > --
> > For IBM-MAIN subscribe / signoff / archive access instructions, send email 
> > to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
> >
> > Please note: This message originated outside your organization. Please use 
> > caution when opening links or attachments.
> >
> > For IBM-MAIN subscribe / signoff / archive access instructions,
> > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
> --
>
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Configuring a CP online

2020-07-08 Thread Jim Mulder 
  The behavior is controlled by the PRESCPU parameter in IEASYSxx.


PRESCPU

This parameter causes system initialization CPU processing to 
bring logically online those CPUs (and only those CPUs) that are 
physically online when the IPL is initiated, without regard to the 
number of CPUs defined to be initially online in the logical partition 
profile.

The purpose is to ensure that all CPUs that are 
online when an IPL is initiated will be online when 
the IPL has completed.

CPUs that are offline when an IPL is initiated will remain 
offline. You might not want to use PRESCPU when 
WLM CPU management is active, because that processing 
might have configured CPUs offline.

If PRESCPU is not coded, CPU initialization takes 
CPUs offline or brings CPUs online as needed to make the 
number of online CPUs equal to the number of initial CPUs 
defined for the partition, when that information is provided 
by the machine (as it should be on model 2064 (GA-3), 
model 2066, and later machines) and is not 0.

If the number of initial CPUs is not provided or is 0, CPU 
initialization will attempt to bring online all CPUs that are 
physically online. On most models, those will be the CPUs 
that were online just before the IPL was initiated, but models 
2064 and 2066 can configure additional CPUs online when 
an IPL is initiated, and CPU initialization will bring those 
CPUs online as well.

Jim Mulder z/OS Diagnosis, Design, Development, Test  IBM Corp. 
Poughkeepsie NY

"IBM Mainframe Discussion List"  wrote on 
07/08/2020 06:41:10 PM:

> From: "Jesse 1 Robinson" 
> To: IBM-MAIN@LISTSERV.UA.EDU
> Date: 07/08/2020 09:20 PM
> Subject: Re: Configuring a CP online
> Sent by: "IBM Mainframe Discussion List" 
> 
> OK, based on advice here, we'll schedule an LPAR bounce at the next 
> IPL. Thanks!
> 
> .
> .
> J.O.Skip Robinson
> Southern California Edison Company
> Electric Dragon Team Paddler 
> SHARE MVS Program Co-Manager
> 323-715-0595 Mobile
> 626-543-6132 Office ⇐=== NEW
> robin...@sce.com
> 
> -Original Message-
> From: IBM Mainframe Discussion List  On 
> Behalf Of Mark Jacobs
> Sent: Wednesday, July 8, 2020 12:02 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: (External):Re: Configuring a CP online [EXTERNAL]
> 
> CAUTION EXTERNAL EMAIL
> 
> Yes, the Image profile needs to be updated for number of CPs to be 
> brought online during IPL.
> 
> Mark Jacobs
> 
> Sent from ProtonMail, Swiss-based encrypted email.
> 
> GPG Public Key - https://api.protonmail.ch/pks/lookup?
> op=get=markjac...@protonmail.com
> 
> ‐‐‐ Original Message ‐‐‐
> On Wednesday, July 8, 2020 2:46 PM, Feller, Paul <02fc94e14c43-
> dmarc-requ...@listserv.ua.edu> wrote:
> 
> > If this CP is to be online from now on then update the lpar 
> hardware profile to insure that it will be there after any 
> deactivate/activate of the lpar. In the back of my mind I'm thinking
> during the IPL process the system looks at the profile to see what 
> number of CPs should be online. I could be wrong, but I keep 
> thinking I've run into the same situation and updating the profile 
> fixed the issue.
> >
> > Thanks..
> >
> > Paul Feller
> > GTS Mainframe Technical Support
> >
> > -Original Message-
> > From: IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU On Behalf 

> > Of Jesse 1 Robinson
> > Sent: Wednesday, July 08, 2020 1:33 PM
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Subject: Configuring a CP online [EXTERNAL]
> >
> > We added a logical CP a while back via CF online. After the next 
> IPL, it was offline until we reissued the CF command. What do we 
> have to do to make it 'permanent'?
> >
> > .
> > .
> > J.O.Skip Robinson
> > Southern California Edison Company
> > Electric Dragon Team Paddler
> > SHARE MVS Program Co-Manager
> > 323-715-0595 Mobile
> > 626-543-6132 Office <= NEW
> > robinsj2@sce.commailto:robin...@sce.com
> >
> 
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN



--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Configuring a CP online

2020-07-08 Thread Jesse 1 Robinson 
OK, based on advice here, we'll schedule an LPAR bounce at the next IPL. Thanks!

.
.
J.O.Skip Robinson
Southern California Edison Company
Electric Dragon Team Paddler 
SHARE MVS Program Co-Manager
323-715-0595 Mobile
626-543-6132 Office ⇐=== NEW
robin...@sce.com

-Original Message-
From: IBM Mainframe Discussion List  On Behalf Of 
Mark Jacobs
Sent: Wednesday, July 8, 2020 12:02 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: (External):Re: Configuring a CP online [EXTERNAL]

CAUTION EXTERNAL EMAIL

Yes, the Image profile needs to be updated for number of CPs to be brought 
online during IPL.

Mark Jacobs

Sent from ProtonMail, Swiss-based encrypted email.

GPG Public Key - 
https://api.protonmail.ch/pks/lookup?op=get=markjac...@protonmail.com

‐‐‐ Original Message ‐‐‐
On Wednesday, July 8, 2020 2:46 PM, Feller, Paul 
<02fc94e14c43-dmarc-requ...@listserv.ua.edu> wrote:

> If this CP is to be online from now on then update the lpar hardware profile 
> to insure that it will be there after any deactivate/activate of the lpar. In 
> the back of my mind I'm thinking during the IPL process the system looks at 
> the profile to see what number of CPs should be online. I could be wrong, but 
> I keep thinking I've run into the same situation and updating the profile 
> fixed the issue.
>
> Thanks..
>
> Paul Feller
> GTS Mainframe Technical Support
>
> -Original Message-
> From: IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU On Behalf 
> Of Jesse 1 Robinson
> Sent: Wednesday, July 08, 2020 1:33 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Configuring a CP online [EXTERNAL]
>
> We added a logical CP a while back via CF online. After the next IPL, it was 
> offline until we reissued the CF command. What do we have to do to make it 
> 'permanent'?
>
> .
> .
> J.O.Skip Robinson
> Southern California Edison Company
> Electric Dragon Team Paddler
> SHARE MVS Program Co-Manager
> 323-715-0595 Mobile
> 626-543-6132 Office <= NEW
> robinsj2@sce.commailto:robin...@sce.com
>

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Configuring a CP online [EXTERNAL]

2020-07-08 Thread Mark Jacobs 
Yes, the Image profile needs to be updated for number of CPs to be brought 
online during IPL.

Mark Jacobs

Sent from ProtonMail, Swiss-based encrypted email.

GPG Public Key - 
https://api.protonmail.ch/pks/lookup?op=get=markjac...@protonmail.com

‐‐‐ Original Message ‐‐‐
On Wednesday, July 8, 2020 2:46 PM, Feller, Paul 
<02fc94e14c43-dmarc-requ...@listserv.ua.edu> wrote:

> If this CP is to be online from now on then update the lpar hardware profile 
> to insure that it will be there after any deactivate/activate of the lpar. In 
> the back of my mind I'm thinking during the IPL process the system looks at 
> the profile to see what number of CPs should be online. I could be wrong, but 
> I keep thinking I've run into the same situation and updating the profile 
> fixed the issue.
>
> Thanks..
>
> Paul Feller
> GTS Mainframe Technical Support
>
> -Original Message-
> From: IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU On Behalf Of 
> Jesse 1 Robinson
> Sent: Wednesday, July 08, 2020 1:33 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Configuring a CP online [EXTERNAL]
>
> We added a logical CP a while back via CF online. After the next IPL, it was 
> offline until we reissued the CF command. What do we have to do to make it 
> 'permanent'?
>
> .
> .
> J.O.Skip Robinson
> Southern California Edison Company
> Electric Dragon Team Paddler
> SHARE MVS Program Co-Manager
> 323-715-0595 Mobile
> 626-543-6132 Office <= NEW
> robinsj2@sce.commailto:robin...@sce.com
>
> --
>
> For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
> lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
> ---
>
> Please note: This message originated outside your organization. Please use 
> caution when opening links or attachments.
>
> --
>
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Configuring a CP online [EXTERNAL]

2020-07-08 Thread Feller, Paul 
If this CP is to be online from now on then update the lpar hardware profile to 
insure that it will be there after any deactivate/activate of the lpar.  In the 
back of my mind I'm thinking during the IPL process the system looks at the 
profile to see what number of CPs should be online.  I could be wrong, but I 
keep thinking I've run into the same situation and updating the profile fixed 
the issue.


Thanks..

Paul Feller
GTS Mainframe Technical Support

-Original Message-
From: IBM Mainframe Discussion List  On Behalf Of 
Jesse 1 Robinson
Sent: Wednesday, July 08, 2020 1:33 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Configuring a CP online [EXTERNAL]

We added a logical CP a while back via CF online. After the next IPL, it was 
offline until we reissued the CF command. What do we have to do to make it 
'permanent'?

.
.
J.O.Skip Robinson
Southern California Edison Company
Electric Dragon Team Paddler
SHARE MVS Program Co-Manager
323-715-0595 Mobile
626-543-6132 Office <= NEW
robin...@sce.com


--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
Please note:  This message originated outside your organization. Please use 
caution when opening links or attachments.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN