KR> Aluminum Band Saw
Can someone send me the link for a condition inspection check list.I thought Dan Heath mentioned it being on his webpage but n i could not find it.Merry Christmas and Happy New Year to all.Joe?Joe Cruz cruzj12 at frontiernet.net KR1.5 N3151K KR2S builder On Wednesday, December 3, 2014 9:30 PM, Patrick Driscoll via KRnet wrote: I bought the Harbor Freight red cutter about a year ago and have used it quite often with no problems. I have even worn out three metal blades with a whole lot of cutting. Patrick Driscoll Saint Paul, MN patrick36 at usfamily.net www.pensbypat.com If you can read this, Thank a teacher If you are reading this in English, thank a veteran ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
KR> Aluminum Band Saw
I bought the Harbor Freight red cutter about a year ago and have used it quite often with no problems. I have even worn out three metal blades with a whole lot of cutting. Patrick Driscoll Saint Paul, MN patrick36 at usfamily.net www.pensbypat.com If you can read this, Thank a teacher If you are reading this in English, thank a veteran
KR> Aluminum Band Saw
Miter saws work great. Just backup the piece. I also used my table saw for ripping and cross cutting various angles. Then the stationary belt sander. Roger Sent from my iPad > On Dec 26, 2013, at 6:02 PM, Larry Flesner > wrote: > > >> I purchased a metal cutting band saw from Sears about 28 years ago for $128. >> Sid Wood > > > A band saw may be handy but I built my KR using a hacksaw to cut aluminum and > a 4 inch stationary belt sander to shape the parts. Maybe that's why it took > me 13 years. :-) Personally, I'd spend my tool money on a good compound > miter saw and a good drill press. > > Larry Flesner > > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
KR> Aluminum Band Saw
Well, the formers for the turtle deck are made of foam, not wood. I started with wood and it was a mess, so having the general shape, I marked that on a piece of foam and it was a simple task to get the shape I wanted to glass over. Whenever I would make a fiberglass part, of course, I would make it with some glass hanging over the edges. It was very simple to then go back and trim the edges on the band saw. I found that using a knife would make some cuts where I did not want them if the knife slipped. And of course, any angle or other aluminum part that could not be cut by the shear, or when it was not convenient to go to the shear, I would cut with the band saw. I also made several parts out of aluminum block ( old retract spring bar ) on my radial arm saw, not having a milling machine. Man, I wish I had a milling maching. See N64KR at http://KRBuilder.org - Then click on the pics? Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best KR at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best Interior at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best Paint at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best Firwwall Forward at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Daniel R. Heath -?Lexington, SC -Original Message- From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Larry Flesner Sent: Thursday, December 26, 2013 8:44 PM To: KRnet Subject: Re: KR> Aluminum Band Saw >For me, a band saw was one of the best tool investments that I made. I >cut a lot of foam and even fiberglass parts as well as aluminum with it. ++ Just curious, what fiberglass parts did you cut with the band saw? I don't remember having to "cut" any fiberglass parts. I cut all my foam with a knife. Larry Flesner ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
KR> Aluminum Band Saw
For me, a band saw was one of the best tool investments that I made. I cut a lot of foam and even fiberglass parts as well as aluminum with it. Just get plenty of blades as fiberglass will tear them up after a few uses. See N64KR at http://KRBuilder.org - Then click on the pics? Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best KR at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best Interior at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best Paint at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best Firwwall Forward at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Daniel R. Heath -?Lexington, SC
KR> Aluminum Band Saw
>For me, a band saw was one of the best tool investments that I made. I cut >a lot of foam and even fiberglass parts as well as aluminum with it. ++ Just curious, what fiberglass parts did you cut with the band saw? I don't remember having to "cut" any fiberglass parts. I cut all my foam with a knife. Larry Flesner
KR> Aluminum Band Saw
I purchased a metal cutting band saw from Sears about 28 years ago for $128. The same saw goes for $492 now. http://www.sears.com/black-bull-mbs45-4-1-2-inch-metal-cutting/p-SPM1532756414?prdNo=5=5=G5 Every piece of aluminum on my KR-2 that ever needed to be cut was done on this band saw, plus numerous other projects. A steady hail of aluminum and steel saw dust chips has rained down on the motor. No problem: The air intake and exhaust for cooling are on the underside of the motor. The V-belt and pulleys are enclosed in a plastic cover. Only maintenance ever done was to replace the blades. Sid Wood Tri-gear KR-2 N6242 Mechanicsville, MD, USA -- > In 1968 I bought a used Delta band saw for cutting wood. I used it some, > not > a lot. One day I put a jack shaft on it and a couple of pulleys and by > changing the belt over, it would run slow or fast and through the years I > cut a lot of metal with it. I always just blew the dust and debris off > from time to time with my air compressor... After many years the motor > failed, it had inhaled way too much aluminum and metal dust. I was able > to > rebuild it and it wasn't that expensive, but a simple little cover over > the > motor made of about anything might have prevented that from happening. > Merry Christmas Paul, enjoy your new band saw. I don't know what I would > do > without mine.. Lynn > > , but a simple little cover over the > motor made of about anything might have prevented that from happening. > Merry Christmas Paul, enjoy your new band saw. I don't know what I would > do > without mine.. Lynn > - > > This is MOST important. I used a light cloth over the end of the motor > with > wire twisted around the motor to hold in place, much better than > rebuilding > or replacing the motor. > PS- REMEMBER to shake the filter clean regularly. > > Phil Matheson
KR> Aluminum Band Saw
>I purchased a metal cutting band saw from Sears about 28 years ago for $128. >Sid Wood A band saw may be handy but I built my KR using a hacksaw to cut aluminum and a 4 inch stationary belt sander to shape the parts. Maybe that's why it took me 13 years. :-) Personally, I'd spend my tool money on a good compound miter saw and a good drill press. Larry Flesner