Re: Live edge cedar coffee table
David that is nice work On Sun, Oct 25, 2020 at 6:05 PM 'David Mann' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Here’s my version of what a cedar live edge coffee table should look like. > Turned out better than expected and the customer is very pleased. This was > the last project with my old “steely “ model legacy, still working on the > new on. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com > . > > > Sent from my iPhone > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRGQgW1ayFMGd79upOj4s7U5QXX%2Bnez6TRrKvq4cbFaGDQ%40mail.gmail.com.
Re: Live edge cedar coffee table
Beautiful work David! On Sun, Oct 25, 2020 at 5:05 PM 'David Mann' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Here’s my version of what a cedar live edge coffee table should look like. > Turned out better than expected and the customer is very pleased. This was > the last project with my old “steely “ model legacy, still working on the > new on. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com > . > > > Sent from my iPhone > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgCvknRqQBJtW7WZboquzrHjZKvS1Ob6B_yh9Wn2SPFsAA%40mail.gmail.com.
Re: Live edge cedar coffee table
Hey Mac, I have done a little testing of that product. Their theory is "a little goes a long way" is pretty accurate. We had a seminar at one of our WoodWorkers guild meetings about a year ago and and we all got to test the product. Seems pretty good if your into hand applied finishes but for the jobs I usually do it was not practical. But with that being said small turnings "Legacy work" I think it might be great. Jewelry boxes etc... Expensive though. I encourage you to try it and see what you think. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Oct 27, 2020 at 12:14 AM M.W.Foscue wrote: > Regarding the finish - it looks great. > > Has anyone worked with a "finish" product by Rubio (company name) - called > Monocoat (the finishing product)? > > Mac > -- > > -Original Message- > From: Tim Ziegler > Sent: Oct 25, 2020 7:24 PM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Live edge cedar coffee table > > Hey David, > > Beautiful work. > I can see why the customer was happy. I'm guessing very ecstatic actually > right. > Keep up the great work. > What are some of your joinery process's you used? > Noting also the high gloss sheen? what product did you use for that? > Did you spray? > > Can't say enough very nice craftsmanship. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > -- > -- > On Sun, Oct 25, 2020 at 6:05 PM 'David Mann' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > >> Here’s my version of what a cedar live edge coffee table should look >> like. Turned out better than expected and the customer is very pleased. >> This was the last project with my old “steely “ model legacy, still working >> on the new on. >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/188143977.11675.1603775654474%40wamui-charming.atl.sa.earthlink.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/188143977.11675.1603775654474%40wamui-charming.atl.sa.earthlink.net?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEC4pWpKyudG3oHAiTXERXq4_YxNQ4C7hb08FAWL1DT7A%40mail.gmail.com.
Re: Live edge cedar coffee table
Regarding the finish - it looks great.Has anyone worked with a "finish" product by Rubio (company name) - called Monocoat (the finishing product)?Mac-Original Message- From: Tim Ziegler Sent: Oct 25, 2020 7:24 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Live edge cedar coffee table Hey David,Beautiful work.I can see why the customer was happy. I'm guessing very ecstatic actually right. Keep up the great work. What are some of your joinery process's you used?Noting also the high gloss sheen? what product did you use for that? Did you spray?Can't say enough very nice craftsmanship. Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Sun, Oct 25, 2020 at 6:05 PM 'David Mann' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:Here’s my version of what a cedar live edge coffee table should look like. Turned out better than expected and the customer is very pleased. This was the last project with my old “steely “ model legacy, still working on the new on. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/188143977.11675.1603775654474%40wamui-charming.atl.sa.earthlink.net.
Re: Live edge cedar coffee table
Nice job - your pictures are an incentive to get my butt in gear On Monday, October 26, 2020 at 3:12:10 PM UTC-4 gcda...@yahoo.com wrote: > Hello Michael, thanks for the information on the sprayer and kind words. > I’ve driven through your neck of the woods when I was a flatbed driver. The > Canadians love that cedar too, pro paying a good price for it. One of the > reasons this new venture is working out for me is there is so much eastern > red cedar here in East texas, and everybody wants it. Except for those who > have it growing on their property. I’ve actually gotten it for free. > This is an oil based poly I used and when I need some more I’ll try out > the water based. Was just looking at the Apollo sprayers too, they look > similar to the Fuji and the only reason I was looking at those is a few > furniture builders I was chatting with mentioned it. So yours has lasted > 10 years, that’s pretty good. I’m definitely going to need one, the > humidity is so bad here I’d never be able to just plug a spray gun into a > compressor. > > Take care, David > Sent from my iPhone > > On Oct 26, 2020, at 8:05 AM, Michael Kratky wrote: > > > > I use a 5 stage Apollo turbine sprayer the advantage is that there’s no > condensation from a compressor getting into the finish and the no more > stages you have the air is preheated setting the finish quicker although a > 3 stage is just fine, at the time I bought it 10 years ago I was told the > more stages the better especially for heavy bodied finishes like latex > paint. Water based finishes are best for red cedar as it darkens > significantly with most anything else. > > > > Michael K > > > > *From:* 'David Mann' via Legacy Ornamental Mills [mailto: > legacy-orna...@googlegroups.com] > *Sent:* Sunday, October 25, 2020 7:52 PM > *To:* legacy-orna...@googlegroups.com > *Subject:* Re: Live edge cedar coffee table > > > > > > > > > > > > > > > > > > > > > > I used the index pin to mortise 3/4 slots (with a 1/2” spiral up it bit) > in the legs for the frame and shelf, then a 1/4 round over bit on the frame > boards to match the radius. I’m not very evolved and learning as I go here. > I’m a retired builder and truck driver.. The finish is fast drying poly > by minwax by hand. I’m really wanting a Fuji hvlp sprayer or something > similar and need to convert the bathroom of the shop to a spray room. > Getting there. I really love working with the legacy, quite easy to use > once you get used to it and it’s always an impressive final product! Thanks > for your kind words, I appreciate it! > > David Mann > > > > Sent from my iPhone > > > > On Oct 25, 2020, at 6:24 PM, Tim Ziegler wrote: > > > > Hey David, > > > > Beautiful work. > > I can see why the customer was happy. I'm guessing very ecstatic actually > right. > > Keep up the great work. > > What are some of your joinery process's you used? > > Noting also the high gloss sheen? what product did you use for that? > > Did you spray? > > > > Can't say enough very nice craftsmanship. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 <(320)%20294-5798> shop > > 320-630-2243 <(320)%20630-2243> cell > > > > > > On Sun, Oct 25, 2020 at 6:05 PM 'David Mann' via Legacy Ornamental Mills < > legacy-orna...@googlegroups.com> wrote: > > Here’s my version of what a cedar live edge coffee table should look like. > Turned out better than expected and the customer is very pleased. This was > the last project with my old “steely “ model legacy, still working on the > new on. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com > . > > > Sent from my iPhone > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42
Re: Live edge cedar coffee table
Hello Michael, thanks for the information on the sprayer and kind words. I’ve driven through your neck of the woods when I was a flatbed driver. The Canadians love that cedar too, pro paying a good price for it. One of the reasons this new venture is working out for me is there is so much eastern red cedar here in East texas, and everybody wants it. Except for those who have it growing on their property. I’ve actually gotten it for free. This is an oil based poly I used and when I need some more I’ll try out the water based. Was just looking at the Apollo sprayers too, they look similar to the Fuji and the only reason I was looking at those is a few furniture builders I was chatting with mentioned it. So yours has lasted 10 years, that’s pretty good. I’m definitely going to need one, the humidity is so bad here I’d never be able to just plug a spray gun into a compressor. Take care, David Sent from my iPhone > On Oct 26, 2020, at 8:05 AM, Michael Kratky wrote: > > > I use a 5 stage Apollo turbine sprayer the advantage is that there’s no > condensation from a compressor getting into the finish and the no more stages > you have the air is preheated setting the finish quicker although a 3 stage > is just fine, at the time I bought it 10 years ago I was told the more stages > the better especially for heavy bodied finishes like latex paint. Water based > finishes are best for red cedar as it darkens significantly with most > anything else. > > Michael K > > From: 'David Mann' via Legacy Ornamental Mills > [mailto:legacy-ornamental-mills@googlegroups.com] > Sent: Sunday, October 25, 2020 7:52 PM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Live edge cedar coffee table > > > > > > > > > > > I used the index pin to mortise 3/4 slots (with a 1/2” spiral up it bit) in > the legs for the frame and shelf, then a 1/4 round over bit on the frame > boards to match the radius. I’m not very evolved and learning as I go here. > I’m a retired builder and truck driver.. The finish is fast drying poly > by minwax by hand. I’m really wanting a Fuji hvlp sprayer or something > similar and need to convert the bathroom of the shop to a spray room. Getting > there. I really love working with the legacy, quite easy to use once you get > used to it and it’s always an impressive final product! Thanks for your kind > words, I appreciate it! > David Mann > > > > Sent from my iPhone > > > On Oct 25, 2020, at 6:24 PM, Tim Ziegler wrote: > > > Hey David, > > Beautiful work. > I can see why the customer was happy. I'm guessing very ecstatic actually > right. > Keep up the great work. > What are some of your joinery process's you used? > Noting also the high gloss sheen? what product did you use for that? > Did you spray? > > Can't say enough very nice craftsmanship. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Sun, Oct 25, 2020 at 6:05 PM 'David Mann' via Legacy Ornamental Mills > wrote: > Here’s my version of what a cedar live edge coffee table should look like. > Turned out better than expected and the customer is very pleased. This was > the last project with my old “steely “ model legacy, still working on the new > on. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com. > > > Sent from my iPhone > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com. > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEN1gCb0UdC6gi68TdRHXuV3Ue4WLUd5PjE
RE: Live edge cedar coffee table
David, Very nice striking wood and workmanship, red cedar is hard to come by here in the Adirondacks being a sawyer for over 20 years I've never come across any of those logs to mill, interestingly what there is get shipped to Canada where they process it but talking with a logger the other day the border is still closed so their industry is hurting. Michael K -Original Message- From: 'David Mann' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Sunday, October 25, 2020 7:05 PM To: legacy-ornamental-mills@googlegroups.com Subject: Live edge cedar coffee table Here’s my version of what a cedar live edge coffee table should look like. Turned out better than expected and the customer is very pleased. This was the last project with my old “steely “ model legacy, still working on the new on. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/006601d6ab92%24b2a74590%2417f5d0b0%24%40com.
Re: Live edge cedar coffee table
Great to see the inspiration coming back. Looking forward to more. I can see why you guys enjoyed it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Oct 26, 2020 at 1:33 AM wrote: > That’s what the group was like years ago when I joined always something > good going on > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Monday, 26 October 2020 1:39 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Live edge cedar coffee table > > > > Sure is great to see all of you guys putting projects and modifications > etc...on the group site. > > Some day when business is slower I may get a chance to play again too. > > In the meantime keep up the great projects etc... > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Sun, Oct 25, 2020 at 8:33 PM 'David Mann' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > > Thanks Denson, can’t wait to see your new setup! > > David > > Sent from my iPhone > > > On Oct 25, 2020, at 8:24 PM, 'Denson Ingram' via Legacy Ornamental Mills > wrote: > > > > Great work beautiful finished product. > > > > Sent from Denson's iPhone > > > >> On Oct 25, 2020, at 7:56 PM, 'David Mann' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > >> > >> This set is straight 3 3/4”, my customer wanted that stocky rustic > look. I’m starting another coffee table with 2 end tables and put a taper > on these, same bit, same start and pitch. > >> > >> -- > >> You received this message because you are subscribed to the Google > Groups "Legacy Ornamental Mills" group. > >> To unsubscribe from this group and stop receiving emails from it, send > an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > >> To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/4E4EF67D-3812-40D3-B33E-30585A94E37F%40yahoo.com > . > >> > >> > >> > >> > >> Sent from my iPhone > >> > >>>> On Oct 25, 2020, at 7:39 PM, bulke...@mmnet.com.au wrote: > >>> > >>> That’s great can you remember the dia of the legs? Again really nice > work. > >>> > >>> Bill > >>> > >>> -Original Message- > >>> From: 'David Mann' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > >>> Sent: Monday, 26 October 2020 11:21 AM > >>> To: legacy-ornamental-mills@googlegroups.com > >>> Subject: Re: Live edge cedar coffee table > >>> > >>> Hi Bill, magnate 7592, 2” plunge round over, 2start with a 4” pitch > >>> > >>> Sent from my iPhone > >>> > >>>>> On Oct 25, 2020, at 7:02 PM, bulke...@mmnet.com.au wrote: > >>>> > >>>> Beautiful job David I love it what router bit and pitch did you use > on the legs > >>>> > >>>> Bill > >>>> > >>>> -Original Message- > >>>> From: 'David Mann' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > >>>> Sent: Monday, 26 October 2020 10:05 AM > >>>> To: legacy-ornamental-mills@googlegroups.com > >>>> Subject: Live edge cedar coffee table > >>>> > >>>> Here’s my version of what a cedar live edge coffee table should look > like. Turned out better than expected and the customer is very pleased. > This was the last project with my old “steely “ model legacy, still working > on the new on. > >>>> > >>>> -- > >>>> You received this message because you are subscribed to the Google > Groups "Legacy Ornamental Mills" group. > >>>> To unsubscribe from this group and stop receiving emails from it, > send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > >>>> To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com > . > >>>> > >>>> > >>>> -- > >>>>
RE: Live edge cedar coffee table
That’s what the group was like years ago when I joined always something good going on Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Monday, 26 October 2020 1:39 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Live edge cedar coffee table Sure is great to see all of you guys putting projects and modifications etc...on the group site. Some day when business is slower I may get a chance to play again too. In the meantime keep up the great projects etc... Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Oct 25, 2020 at 8:33 PM 'David Mann' via Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> > wrote: Thanks Denson, can’t wait to see your new setup! David Sent from my iPhone > On Oct 25, 2020, at 8:24 PM, 'Denson Ingram' via Legacy Ornamental Mills > <mailto:legacy-ornamental-mills@googlegroups.com> > wrote: > > Great work beautiful finished product. > > Sent from Denson's iPhone > >> On Oct 25, 2020, at 7:56 PM, 'David Mann' via Legacy Ornamental Mills >> > <mailto:legacy-ornamental-mills@googlegroups.com> > wrote: >> >> This set is straight 3 3/4”, my customer wanted that stocky rustic look. >> I’m starting another coffee table with 2 end tables and put a taper on >> these, same bit, same start and pitch. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com >> <mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com> . >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/4E4EF67D-3812-40D3-B33E-30585A94E37F%40yahoo.com. >> >> >> >> >> Sent from my iPhone >> >>>> On Oct 25, 2020, at 7:39 PM, bulke...@mmnet.com.au >>>> <mailto:bulke...@mmnet.com.au> wrote: >>> >>> That’s great can you remember the dia of the legs? Again really nice work. >>> >>> Bill >>> >>> -Original Message----- >>> From: 'David Mann' via Legacy Ornamental Mills >>> >> <mailto:legacy-ornamental-mills@googlegroups.com> > >>> Sent: Monday, 26 October 2020 11:21 AM >>> To: legacy-ornamental-mills@googlegroups.com >>> <mailto:legacy-ornamental-mills@googlegroups.com> >>> Subject: Re: Live edge cedar coffee table >>> >>> Hi Bill, magnate 7592, 2” plunge round over, 2start with a 4” pitch >>> >>> Sent from my iPhone >>> >>>>> On Oct 25, 2020, at 7:02 PM, bulke...@mmnet.com.au >>>>> <mailto:bulke...@mmnet.com.au> wrote: >>>> >>>> Beautiful job David I love it what router bit and pitch did you use on >>>> the legs >>>> >>>> Bill >>>> >>>> -Original Message- >>>> From: 'David Mann' via Legacy Ornamental Mills >>>> >>> <mailto:legacy-ornamental-mills@googlegroups.com> > >>>> Sent: Monday, 26 October 2020 10:05 AM >>>> To: legacy-ornamental-mills@googlegroups.com >>>> <mailto:legacy-ornamental-mills@googlegroups.com> >>>> Subject: Live edge cedar coffee table >>>> >>>> Here’s my version of what a cedar live edge coffee table should look like. >>>> Turned out better than expected and the customer is very pleased. This was >>>> the last project with my old “steely “ model legacy, still working on the >>>> new on. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Legacy Ornamental Mills" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com >>>> <mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com> . >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com. >>>> >>>> >>>> -- >>>> This email has been checked for viruses by Avast antivirus software. >>>> https://www.avast.com/antivirus >>>> >>>
Re: Live edge cedar coffee table
I’ll be sending pics soon. Sent from Denson's iPhone > On Oct 25, 2020, at 9:39 PM, Tim Ziegler wrote: > > > Sure is great to see all of you guys putting projects and modifications > etc...on the group site. > Some day when business is slower I may get a chance to play again too. > In the meantime keep up the great projects etc... > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > >> On Sun, Oct 25, 2020 at 8:33 PM 'David Mann' via Legacy Ornamental Mills >> wrote: >> Thanks Denson, can’t wait to see your new setup! >> >> David >> >> Sent from my iPhone >> >> > On Oct 25, 2020, at 8:24 PM, 'Denson Ingram' via Legacy Ornamental Mills >> > wrote: >> > >> > Great work beautiful finished product. >> > >> > Sent from Denson's iPhone >> > >> >> On Oct 25, 2020, at 7:56 PM, 'David Mann' via Legacy Ornamental Mills >> >> wrote: >> >> >> >> This set is straight 3 3/4”, my customer wanted that stocky rustic look. >> >> I’m starting another coffee table with 2 end tables and put a taper on >> >> these, same bit, same start and pitch. >> >> >> >> -- >> >> You received this message because you are subscribed to the Google Groups >> >> "Legacy Ornamental Mills" group. >> >> To unsubscribe from this group and stop receiving emails from it, send an >> >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> >> To view this discussion on the web visit >> >> https://groups.google.com/d/msgid/legacy-ornamental-mills/4E4EF67D-3812-40D3-B33E-30585A94E37F%40yahoo.com. >> >> >> >> >> >> >> >> >> >> Sent from my iPhone >> >> >> >>>> On Oct 25, 2020, at 7:39 PM, bulke...@mmnet.com.au wrote: >> >>> >> >>> That’s great can you remember the dia of the legs? Again really nice >> >>> work. >> >>> >> >>> Bill >> >>> >> >>> -Original Message- >> >>> From: 'David Mann' via Legacy Ornamental Mills >> >>> >> >>> Sent: Monday, 26 October 2020 11:21 AM >> >>> To: legacy-ornamental-mills@googlegroups.com >> >>> Subject: Re: Live edge cedar coffee table >> >>> >> >>> Hi Bill, magnate 7592, 2” plunge round over, 2start with a 4” pitch >> >>> >> >>> Sent from my iPhone >> >>> >> >>>>> On Oct 25, 2020, at 7:02 PM, bulke...@mmnet.com.au wrote: >> >>>> >> >>>> Beautiful job David I love it what router bit and pitch did you use on >> >>>> the legs >> >>>> >> >>>> Bill >> >>>> >> >>>> -Original Message- >> >>>> From: 'David Mann' via Legacy Ornamental Mills >> >>>> >> >>>> Sent: Monday, 26 October 2020 10:05 AM >> >>>> To: legacy-ornamental-mills@googlegroups.com >> >>>> Subject: Live edge cedar coffee table >> >>>> >> >>>> Here’s my version of what a cedar live edge coffee table should look >> >>>> like. Turned out better than expected and the customer is very pleased. >> >>>> This was the last project with my old “steely “ model legacy, still >> >>>> working on the new on. >> >>>> >> >>>> -- >> >>>> You received this message because you are subscribed to the Google >> >>>> Groups "Legacy Ornamental Mills" group. >> >>>> To unsubscribe from this group and stop receiving emails from it, send >> >>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> >>>> To view this discussion on the web visit >> >>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com. >> >>>> >> >>>> >> >>>> -- >> >>>> This email has been checked for viruses by Avast antivirus software. >> >>>> https://www.avast.com/antivirus >> >>>> >> >>>> -- >> >>>> You received this message because you a
Re: Live edge cedar coffee table
Sure is great to see all of you guys putting projects and modifications etc...on the group site. Some day when business is slower I may get a chance to play again too. In the meantime keep up the great projects etc... Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Oct 25, 2020 at 8:33 PM 'David Mann' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Thanks Denson, can’t wait to see your new setup! > > David > > Sent from my iPhone > > > On Oct 25, 2020, at 8:24 PM, 'Denson Ingram' via Legacy Ornamental Mills > wrote: > > > > Great work beautiful finished product. > > > > Sent from Denson's iPhone > > > >> On Oct 25, 2020, at 7:56 PM, 'David Mann' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > >> > >> This set is straight 3 3/4”, my customer wanted that stocky rustic > look. I’m starting another coffee table with 2 end tables and put a taper > on these, same bit, same start and pitch. > >> > >> -- > >> You received this message because you are subscribed to the Google > Groups "Legacy Ornamental Mills" group. > >> To unsubscribe from this group and stop receiving emails from it, send > an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > >> To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/4E4EF67D-3812-40D3-B33E-30585A94E37F%40yahoo.com > . > >> > >> > >> > >> > >> Sent from my iPhone > >> > >>>> On Oct 25, 2020, at 7:39 PM, bulke...@mmnet.com.au wrote: > >>> > >>> That’s great can you remember the dia of the legs? Again really nice > work. > >>> > >>> Bill > >>> > >>> -Original Message- > >>> From: 'David Mann' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > >>> Sent: Monday, 26 October 2020 11:21 AM > >>> To: legacy-ornamental-mills@googlegroups.com > >>> Subject: Re: Live edge cedar coffee table > >>> > >>> Hi Bill, magnate 7592, 2” plunge round over, 2start with a 4” pitch > >>> > >>> Sent from my iPhone > >>> > >>>>> On Oct 25, 2020, at 7:02 PM, bulke...@mmnet.com.au wrote: > >>>> > >>>> Beautiful job David I love it what router bit and pitch did you use > on the legs > >>>> > >>>> Bill > >>>> > >>>> -Original Message- > >>>> From: 'David Mann' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > >>>> Sent: Monday, 26 October 2020 10:05 AM > >>>> To: legacy-ornamental-mills@googlegroups.com > >>>> Subject: Live edge cedar coffee table > >>>> > >>>> Here’s my version of what a cedar live edge coffee table should look > like. Turned out better than expected and the customer is very pleased. > This was the last project with my old “steely “ model legacy, still working > on the new on. > >>>> > >>>> -- > >>>> You received this message because you are subscribed to the Google > Groups "Legacy Ornamental Mills" group. > >>>> To unsubscribe from this group and stop receiving emails from it, > send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > >>>> To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com > . > >>>> > >>>> > >>>> -- > >>>> This email has been checked for viruses by Avast antivirus software. > >>>> https://www.avast.com/antivirus > >>>> > >>>> -- > >>>> You received this message because you are subscribed to the Google > Groups "Legacy Ornamental Mills" group. > >>>> To unsubscribe from this group and stop receiving emails from it, > send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > >>>> To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d6ab2b%2451d957b0%24f58c0710%24%40mmnet.com.au > . > >>> > >>> -- > >>> You received this message because you are subscribed to the Google > Groups "Legacy Ornamental Mills" group. > >>> T
Re: Live edge cedar coffee table
Thanks Denson, can’t wait to see your new setup! David Sent from my iPhone > On Oct 25, 2020, at 8:24 PM, 'Denson Ingram' via Legacy Ornamental Mills > wrote: > > Great work beautiful finished product. > > Sent from Denson's iPhone > >> On Oct 25, 2020, at 7:56 PM, 'David Mann' via Legacy Ornamental Mills >> wrote: >> >> This set is straight 3 3/4”, my customer wanted that stocky rustic look. >> I’m starting another coffee table with 2 end tables and put a taper on >> these, same bit, same start and pitch. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/4E4EF67D-3812-40D3-B33E-30585A94E37F%40yahoo.com. >> >> >> >> >> Sent from my iPhone >> >>>> On Oct 25, 2020, at 7:39 PM, bulke...@mmnet.com.au wrote: >>> >>> That’s great can you remember the dia of the legs? Again really nice work. >>> >>> Bill >>> >>> -Original Message- >>> From: 'David Mann' via Legacy Ornamental Mills >>> >>> Sent: Monday, 26 October 2020 11:21 AM >>> To: legacy-ornamental-mills@googlegroups.com >>> Subject: Re: Live edge cedar coffee table >>> >>> Hi Bill, magnate 7592, 2” plunge round over, 2start with a 4” pitch >>> >>> Sent from my iPhone >>> >>>>> On Oct 25, 2020, at 7:02 PM, bulke...@mmnet.com.au wrote: >>>> >>>> Beautiful job David I love it what router bit and pitch did you use on >>>> the legs >>>> >>>> Bill >>>> >>>> -Original Message- >>>> From: 'David Mann' via Legacy Ornamental Mills >>>> >>>> Sent: Monday, 26 October 2020 10:05 AM >>>> To: legacy-ornamental-mills@googlegroups.com >>>> Subject: Live edge cedar coffee table >>>> >>>> Here’s my version of what a cedar live edge coffee table should look like. >>>> Turned out better than expected and the customer is very pleased. This was >>>> the last project with my old “steely “ model legacy, still working on the >>>> new on. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Legacy Ornamental Mills" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com. >>>> >>>> >>>> -- >>>> This email has been checked for viruses by Avast antivirus software. >>>> https://www.avast.com/antivirus >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Legacy Ornamental Mills" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d6ab2b%2451d957b0%24f58c0710%24%40mmnet.com.au. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/4495CCE2-91B3-4E3D-96AE-AA9DE4F29B84%40yahoo.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/001101d6ab30%24760139
Re: Live edge cedar coffee table
Great work beautiful finished product. Sent from Denson's iPhone > On Oct 25, 2020, at 7:56 PM, 'David Mann' via Legacy Ornamental Mills > wrote: > > This set is straight 3 3/4”, my customer wanted that stocky rustic look. I’m > starting another coffee table with 2 end tables and put a taper on these, > same bit, same start and pitch. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/4E4EF67D-3812-40D3-B33E-30585A94E37F%40yahoo.com. > > > > > Sent from my iPhone > >> On Oct 25, 2020, at 7:39 PM, bulke...@mmnet.com.au wrote: >> >> That’s great can you remember the dia of the legs? Again really nice work. >> >> Bill >> >> -Original Message- >> From: 'David Mann' via Legacy Ornamental Mills >> >> Sent: Monday, 26 October 2020 11:21 AM >> To: legacy-ornamental-mills@googlegroups.com >> Subject: Re: Live edge cedar coffee table >> >> Hi Bill, magnate 7592, 2” plunge round over, 2start with a 4” pitch >> >> Sent from my iPhone >> >>>> On Oct 25, 2020, at 7:02 PM, bulke...@mmnet.com.au wrote: >>> >>> Beautiful job David I love it what router bit and pitch did you use on the >>> legs >>> >>> Bill >>> >>> -Original Message- >>> From: 'David Mann' via Legacy Ornamental Mills >>> >>> Sent: Monday, 26 October 2020 10:05 AM >>> To: legacy-ornamental-mills@googlegroups.com >>> Subject: Live edge cedar coffee table >>> >>> Here’s my version of what a cedar live edge coffee table should look like. >>> Turned out better than expected and the customer is very pleased. This was >>> the last project with my old “steely “ model legacy, still working on the >>> new on. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com. >>> >>> >>> -- >>> This email has been checked for viruses by Avast antivirus software. >>> https://www.avast.com/antivirus >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d6ab2b%2451d957b0%24f58c0710%24%40mmnet.com.au. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/4495CCE2-91B3-4E3D-96AE-AA9DE4F29B84%40yahoo.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/001101d6ab30%24760139a0%246203ace0%24%40mmnet.com.au. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/4E4EF67D-3812-40D3-B33E-30585A94E37F%40yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/6A2EE5A6-512E-4BA9-9B1B-1375572946AD%40yahoo.com.
RE: Live edge cedar coffee table
That’s great can you remember the dia of the legs? Again really nice work. Bill -Original Message- From: 'David Mann' via Legacy Ornamental Mills Sent: Monday, 26 October 2020 11:21 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Live edge cedar coffee table Hi Bill, magnate 7592, 2” plunge round over, 2start with a 4” pitch Sent from my iPhone > On Oct 25, 2020, at 7:02 PM, bulke...@mmnet.com.au wrote: > > Beautiful job David I love it what router bit and pitch did you use on the > legs > > Bill > > -Original Message- > From: 'David Mann' via Legacy Ornamental Mills > > Sent: Monday, 26 October 2020 10:05 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: Live edge cedar coffee table > > Here’s my version of what a cedar live edge coffee table should look like. > Turned out better than expected and the customer is very pleased. This was > the last project with my old “steely “ model legacy, still working on the new > on. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com. > > > -- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d6ab2b%2451d957b0%24f58c0710%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/4495CCE2-91B3-4E3D-96AE-AA9DE4F29B84%40yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001101d6ab30%24760139a0%246203ace0%24%40mmnet.com.au.
Re: Live edge cedar coffee table
Hi Bill, magnate 7592, 2” plunge round over, 2start with a 4” pitch Sent from my iPhone > On Oct 25, 2020, at 7:02 PM, bulke...@mmnet.com.au wrote: > > Beautiful job David I love it what router bit and pitch did you use on the > legs > > Bill > > -Original Message- > From: 'David Mann' via Legacy Ornamental Mills > > Sent: Monday, 26 October 2020 10:05 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: Live edge cedar coffee table > > Here’s my version of what a cedar live edge coffee table should look like. > Turned out better than expected and the customer is very pleased. This was > the last project with my old “steely “ model legacy, still working on the new > on. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com. > > > -- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d6ab2b%2451d957b0%24f58c0710%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/4495CCE2-91B3-4E3D-96AE-AA9DE4F29B84%40yahoo.com.
RE: Live edge cedar coffee table
Beautiful job David I love it what router bit and pitch did you use on the legs Bill -Original Message- From: 'David Mann' via Legacy Ornamental Mills Sent: Monday, 26 October 2020 10:05 AM To: legacy-ornamental-mills@googlegroups.com Subject: Live edge cedar coffee table Here’s my version of what a cedar live edge coffee table should look like. Turned out better than expected and the customer is very pleased. This was the last project with my old “steely “ model legacy, still working on the new on. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com. -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d6ab2b%2451d957b0%24f58c0710%24%40mmnet.com.au.
Re: Live edge cedar coffee table
Very nice job David!What size are those legs? 5" or 6"diamater? C.A.G. On Sunday, October 25, 2020, 07:24:20 PM EDT, Tim Ziegler wrote: Hey David, Beautiful work.I can see why the customer was happy. I'm guessing very ecstatic actually right. Keep up the great work. What are some of your joinery process's you used?Noting also the high gloss sheen? what product did you use for that? Did you spray? Can't say enough very nice craftsmanship. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Sun, Oct 25, 2020 at 6:05 PM 'David Mann' via Legacy Ornamental Mills wrote: Here’s my version of what a cedar live edge coffee table should look like. Turned out better than expected and the customer is very pleased. This was the last project with my old “steely “ model legacy, still working on the new on. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com. Sent from my iPhone -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEN1gCb0UdC6gi68TdRHXuV3Ue4WLUd5PjECcwX7qrA5g%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/995432477.2462486.1603669742383%40mail.yahoo.com.
Re: Live edge cedar coffee table
Hey David, Beautiful work. I can see why the customer was happy. I'm guessing very ecstatic actually right. Keep up the great work. What are some of your joinery process's you used? Noting also the high gloss sheen? what product did you use for that? Did you spray? Can't say enough very nice craftsmanship. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Oct 25, 2020 at 6:05 PM 'David Mann' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Here’s my version of what a cedar live edge coffee table should look like. > Turned out better than expected and the customer is very pleased. This was > the last project with my old “steely “ model legacy, still working on the > new on. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com > . > > > Sent from my iPhone > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0768BA06-9F2C-42EF-8592-208D821FAA3B%40yahoo.com > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEN1gCb0UdC6gi68TdRHXuV3Ue4WLUd5PjECcwX7qrA5g%40mail.gmail.com.
