Re: Réf. : Re: [LegacyUG] Alphabet Character set
On 2015/02/08 07:11 PM, David Abernathy wrote: > You have both talked about ALL character set, don’t you both think that it > would > be impossible to do. UTF-16 (16-bit Unicode Transformation Format) is a character encoding capable of encoding all 1,112,064 possible characters in Unicode. This covers all Latin-derived alphabets and most Asian pictographs. Unfortunately, ASCII is a very small sub-set of Unicode and the costs of converting Legacy to Unicode would almost be prohibitive. Oh yes, you'd also need more disk storage for every file. -- Regards, Mike Fry (Jhb) Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Réf. : Re: Réf. : RE: Réf. : Re: [LegacyUG] Alphabet Character set
Good positive suggestions Larry I do not need these special characters, but I tried to put myself in the shoes of someone with, let say, Polish ancestors. Right now this person cannot properly register the name of its ancestors with the characters available. I am sure, like you, that the list of available characters could be expanded Georges ---Message original--- De : Larry Lee Date : 02/08/15 12:09:17 A : legacyusergroup@LegacyUsers.com Sujet : Re: Réf. : RE: Réf. : Re: [LegacyUG] Alphabet Character set Hello all, Based upon this thread I have submitted an enhancement suggestion to allow a user to select the special characters from any of the Microsoft supported language character maps. I am not very knowledgeable in this area but from my research it appears there would be a way to 1) select the desired language then the appropriate character from that language's character map, 2) these characters could populate the Special Characters Ribbon to be used in the notes. This seems like it should be doable, but I don't know if that could be programmed to work in Legacy. I hope it can. I also suggested the ribbon be expanded from 8 to 16 characters. Larry Lee Larry Lee ldlee...@gmail.com On Sun, Feb 8, 2015 at 10:18 AM, sarrazingeor...@gmail.com wrote: David Let start with the European characters . . . Georges ---Message original--- De : David Abernathy Date : 02/08/15 11:13:34 A : legacyusergroup@LegacyUsers.com Sujet : RE: Réf. : Re: [LegacyUG] Alphabet Character set John and Geortges, You have both talked about ALL character set, don’t you both think that it would be impossible to do. With ALL of the different languages in today’s world there is NO program that can handle this. You will see that some programs have different languages but NOT all of them. There just is not enough of a market to cover ALL of them. Do not get me started on the Far East languages, let alone the Middle East languages. Thanks, David C Abernathy Email disclaimers This message represents the official view of the voices in my head. http://www.SchmeckAbernathy.com == All outgoing and incoming mail is scanned by F-Prot Antivirus == From: sarrazingeor...@gmail.com [mailto:sarrazingeor...@gmail.com] Sent: Saturday, February 07, 2015 7:04 PM To: legacyusergroup@LegacyUsers.com Subject: Réf. : Re: [LegacyUG] Alphabet Character set John I sympathize with your situation. If Millennia wants Legacy to be international, they have no choices but make all the international characters available. It is a must. I hope that Millennia will put all the other projects aside and make this long due option their ONLY priority. Otherwise the so call international character of Legacy is a false pretense. Georges ---Message original--- De : johnbernac...@iprimus.com.au Date : 2015-02-07 19:17:55 A : legacyusergroup@LegacyUsers.com Sujet : Re: [LegacyUG] Alphabet Character set I have found “RootsMagic†have all the Polish characters. It enables you to use all the special characters available in Microsoft Word in the same way as Word does. I have recently downloaded RootsMagic to try out its other capabilities and functions. Special characters are a high priority for me so I am very seriously considering changing from Legacy to RootsMagic. I simply do not understand why you cannot bring up the full set of special characters in Legacy but you can in Word and RootsMagic. Legacy appears to have no interest whatsoever in addressing this. John -Original Message- From: Michele/Support Sent: Sunday, February 08, 2015 10:42 AM To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Alphabet Character set Al, Legacy only supports Western European fonts. This does include quite a few letters with diacritics but some of the Polish characters are not included, like the L with the slash through it. Michele Technical Support mich...@legacyfamilytree.com www.legacyfamilytree.com From: Albert Ignatowski [mailto:alh...@aol.com] Sent: Saturday, January 31, 2015 3:18 PM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Alphabet Character set Hello again, Is it possible to select alphabet character sets other than the default set in Legacy 8? What I an looking for is an alphabet set that includes some of the European characters that have accent marks over consonants such as "n", "s", and the slash mark through "l" as in Polish. Thank you in advance for your help. Al Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamily
Re: Réf. : RE: Réf. : Re: [LegacyUG] Alphabet Character set
I thought we could already do that. I selected the Swedish characters for mine. Sent from my iPad > On Feb 8, 2015, at 12:09 PM, Larry Lee wrote: > > Hello all, > > Based upon this thread I have submitted an enhancement suggestion to allow a > user to select the special characters from any of the Microsoft supported > language character maps. > > I am not very knowledgeable in this area but from my research it appears > there would be a way to 1) select the desired language then the appropriate > character from that language's character map, 2) these characters could > populate the Special Characters Ribbon to be used in the notes. > > This seems like it should be doable, but I don't know if that could be > programmed to work in Legacy. I hope it can. I also suggested the ribbon be > expanded from 8 to 16 characters. > > Larry Lee > > Larry Lee > ldlee...@gmail.com > > >> On Sun, Feb 8, 2015 at 10:18 AM, sarrazingeor...@gmail.com >> wrote: >> >> David >> >> Let start with the European characters . . . >> >> Georges >> >> >> >> >> -------Message original------- >> >> De : David Abernathy >> Date : 02/08/15 11:13:34 >> A : legacyusergroup@LegacyUsers.com >> Sujet : RE: Réf. : Re: [LegacyUG] Alphabet Character set >> >> John and Geortges, >> >> You have both talked about ALL character set, don’t you both think that it >> would be impossible to do. >> >> With ALL of the different languages in today’s world there is NO program >> that can handle this. You will see that some programs have different >> languages but NOT all of them. There just is not enough of a market to cover >> ALL of them. >> >> Do not get me started on the Far East languages, let alone the Middle East >> languages. >> >> >> >> >> Thanks, >> David C Abernathy >> Email disclaimers >> >> This message represents the official view of the voices in my head. >> ------------ >> http://www.SchmeckAbernathy.com >> == All outgoing and incoming mail is scanned by F-Prot Antivirus == >> >> >> From: sarrazingeor...@gmail.com [mailto:sarrazingeor...@gmail.com] >> Sent: Saturday, February 07, 2015 7:04 PM >> To: legacyusergroup@LegacyUsers.com >> Subject: Réf. : Re: [LegacyUG] Alphabet Character set >> >> >> John >> >> I sympathize with your situation. >> If Millennia wants Legacy to be international, they have no choices but >> make all the international characters available. >> It is a must. >> >> I hope that Millennia will put all the other projects aside and make this >> long due option their ONLY priority. >> Otherwise the so call international character of Legacy is a false pretense. >> >> Georges >> >> >> >> >> ---Message original--- >> >> De : johnbernac...@iprimus.com.au >> Date : 2015-02-07 19:17:55 >> A : legacyusergroup@LegacyUsers.com >> Sujet : Re: [LegacyUG] Alphabet Character set >> >> I have found “RootsMagic†have all the Polish characters. It enables you >> to >> use all the special characters available in Microsoft Word in the same way >> as Word does. I have recently downloaded RootsMagic to try out its other >> capabilities and functions. >> >> Special characters are a high priority for me so I am very seriously >> considering changing from Legacy to RootsMagic. I simply do not understand >> why you cannot bring up the full set of special characters in Legacy but you >> can in Word and RootsMagic. Legacy appears to have no interest whatsoever in >> addressing this. >> >> John >> >> -Original Message- >> From: Michele/Support >> Sent: Sunday, February 08, 2015 10:42 AM >> To: legacyusergroup@LegacyUsers.com >> Subject: RE: [LegacyUG] Alphabet Character set >> >> Al, >> Legacy only supports Western European fonts. This does include quite a few >> letters with diacritics but some of the Polish characters are not included, >> like the L with the slash through it. >> >> >> Michele >> Technical Support >> mich...@legacyfamilytree.com >> www.legacyfamilytree.com >> >> From: Albert Ignatowski [mailto:alh...@aol.com] >> Sent: Saturday, January 31, 2015 3:18 PM >> To: legacyusergroup@LegacyUsers.com >> Subject: [LegacyUG] Alphabet Character set
Re: Réf. : RE: Réf. : Re: [LegacyUG] Alphabet Character set
Hello all, Based upon this thread I have submitted an enhancement suggestion to allow a user to select the special characters from any of the Microsoft supported language character maps. I am not very knowledgeable in this area but from my research it appears there would be a way to 1) select the desired language then the appropriate character from that language's character map, 2) these characters could populate the Special Characters Ribbon to be used in the notes. This seems like it should be doable, but I don't know if that could be programmed to work in Legacy. I hope it can. I also suggested the ribbon be expanded from 8 to 16 characters. Larry Lee Larry Lee ldlee...@gmail.com On Sun, Feb 8, 2015 at 10:18 AM, sarrazingeor...@gmail.com < sarrazingeor...@gmail.com> wrote: > David > > Let start with the European characters . . . > > Georges > > > > > *---Message original---* > > *De :* David Abernathy > *Date :* 02/08/15 11:13:34 > *A :* legacyusergroup@LegacyUsers.com > *Sujet :* RE: Réf. : Re: [LegacyUG] Alphabet Character set > > > John and Geortges, > > You have both talked about ALL character set, don’t you both think that it > would be impossible to do. > > With ALL of the different languages in today’s world there is NO program > that can handle this. You will see that some programs have different > languages but NOT all of them. There just is not enough of a market to > cover ALL of them. > > Do not get me started on the Far East languages, let alone the Middle > East languages. > > > > > > Thanks, > > David C Abernathy > > Email disclaimers > > > > > This message represents the official view of the voices in my head. > > > > > http://www.SchmeckAbernathy.com > > == All outgoing and incoming mail is scanned by F-Prot Antivirus == > > > > *From:* sarrazingeor...@gmail.com [mailto:sarrazingeor...@gmail.com] > *Sent:* Saturday, February 07, 2015 7:04 PM > *To:* legacyusergroup@LegacyUsers.com > *Subject:* Réf. : Re: [LegacyUG] Alphabet Character set > > > > John > > > > I sympathize with your situation. > > If Millennia wants Legacy to be international, they have no choices but > make all the international characters available. > > It is a must. > > > > I hope that Millennia will put all the other projects aside and make this > long due option their ONLY priority. > > Otherwise the so call international character of Legacy is a false > pretense. > > > > Georges > > > > > > > > > > *---Message original---* > > > > *De :* johnbernac...@iprimus.com.au > > *Date :* 2015-02-07 19:17:55 > > *A :* legacyusergroup@LegacyUsers.com > > *Sujet :* Re: [LegacyUG] Alphabet Character set > > > > I have found “RootsMagic†have all the Polish characters. It enables > you to > > use all the special characters available in Microsoft Word in the same way > > as Word does. I have recently downloaded RootsMagic to try out its other > > capabilities and functions. > > > > Special characters are a high priority for me so I am very seriously > > considering changing from Legacy to RootsMagic. I simply do not understand > > why you cannot bring up the full set of special characters in Legacy but > you > > can in Word and RootsMagic. Legacy appears to have no interest whatsoever > in > > addressing this. > > > > John > > > > -Original Message- > > From: Michele/Support > > Sent: Sunday, February 08, 2015 10:42 AM > > To: legacyusergroup@LegacyUsers.com > > Subject: RE: [LegacyUG] Alphabet Character set > > > > Al, > > Legacy only supports Western European fonts. This does include quite a few > > letters with diacritics but some of the Polish characters are not included, > > like the L with the slash through it. > > > > > > Michele > > Technical Support > > mich...@legacyfamilytree.com > > www.legacyfamilytree.com > > > > From: Albert Ignatowski [mailto:alh...@aol.com ] > > Sent: Saturday, January 31, 2015 3:18 PM > > To: legacyusergroup@LegacyUsers.com > > Subject: [LegacyUG] Alphabet Character set > > > > Hello again, > > > > Is it possible to select alphabet character sets other than the default > > set in Legacy 8? What I an looking for is an alphabet set that includes > > some of the European characters that have accent marks over consonants >
Réf. : RE: Réf. : Re: [LegacyUG] Alphabet Character set
David Let start with the European characters . . . Georges ---Message original--- De : David Abernathy Date : 02/08/15 11:13:34 A : legacyusergroup@LegacyUsers.com Sujet : RE: Réf. : Re: [LegacyUG] Alphabet Character set John and Geortges, You have both talked about ALL character set, don’t you both think that it would be impossible to do. With ALL of the different languages in today’s world there is NO program that can handle this. You will see that some programs have different languages but NOT all of them. There just is not enough of a market to cover ALL of them. Do not get me started on the Far East languages, let alone the Middle East languages. Thanks, David C Abernathy Email disclaimers This message represents the official view of the voices in my head. http://www.SchmeckAbernathy.com == All outgoing and incoming mail is scanned by F-Prot Antivirus == From: sarrazingeor...@gmail.com [mailto:sarrazingeor...@gmail.com] Sent: Saturday, February 07, 2015 7:04 PM To: legacyusergroup@LegacyUsers.com Subject: Réf. : Re: [LegacyUG] Alphabet Character set John I sympathize with your situation. If Millennia wants Legacy to be international, they have no choices but make all the international characters available. It is a must. I hope that Millennia will put all the other projects aside and make this long due option their ONLY priority. Otherwise the so call international character of Legacy is a false pretense. Georges ---Message original--- De : johnbernac...@iprimus.com.au Date : 2015-02-07 19:17:55 A : legacyusergroup@LegacyUsers.com Sujet : Re: [LegacyUG] Alphabet Character set I have found âRootsMagicâ have all the Polish characters. It enables you to use all the special characters available in Microsoft Word in the same way as Word does. I have recently downloaded RootsMagic to try out its other capabilities and functions. Special characters are a high priority for me so I am very seriously considering changing from Legacy to RootsMagic. I simply do not understand why you cannot bring up the full set of special characters in Legacy but you can in Word and RootsMagic. Legacy appears to have no interest whatsoever in addressing this. John -Original Message- From: Michele/Support Sent: Sunday, February 08, 2015 10:42 AM To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Alphabet Character set Al, Legacy only supports Western European fonts. This does include quite a few letters with diacritics but some of the Polish characters are not included, like the L with the slash through it. Michele Technical Support mich...@legacyfamilytree.com www.legacyfamilytree.com From: Albert Ignatowski [mailto:alh...@aol.com] Sent: Saturday, January 31, 2015 3:18 PM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Alphabet Character set Hello again, Is it possible to select alphabet character sets other than the default set in Legacy 8? What I an looking for is an alphabet set that includes some of the European characters that have accent marks over consonants such as "n", "s", and the slash mark through "l" as in Polish. Thank you in advance for your help. Al Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4281/9072 - Release Date: 02/07/15 Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
RE: Réf. : Re: [LegacyUG] Alphabet Character set
John and Geortges, You have both talked about ALL character set, don’t you both think that it would be impossible to do. With ALL of the different languages in today’s world there is NO program that can handle this. You will see that some programs have different languages but NOT all of them. There just is not enough of a market to cover ALL of them. Do not get me started on the Far East languages, let alone the Middle East languages. Thanks, David C Abernathy Email disclaimers This message represents the official view of the voices in my head. http://www.SchmeckAbernathy.com == All outgoing and incoming mail is scanned by F-Prot Antivirus == From: sarrazingeor...@gmail.com [mailto:sarrazingeor...@gmail.com] Sent: Saturday, February 07, 2015 7:04 PM To: legacyusergroup@LegacyUsers.com Subject: Réf. : Re: [LegacyUG] Alphabet Character set John I sympathize with your situation. If Millennia wants Legacy to be international, they have no choices but make all the international characters available. It is a must. I hope that Millennia will put all the other projects aside and make this long due option their ONLY priority. Otherwise the so call international character of Legacy is a false pretense. Georges ---Message original--- De : johnbernac...@iprimus.com.au Date : 2015-02-07 19:17:55 A : legacyusergroup@LegacyUsers.com Sujet : Re: [LegacyUG] Alphabet Character set I have found “RootsMagic†have all the Polish characters. It enables you to use all the special characters available in Microsoft Word in the same way as Word does. I have recently downloaded RootsMagic to try out its other capabilities and functions. Special characters are a high priority for me so I am very seriously considering changing from Legacy to RootsMagic. I simply do not understand why you cannot bring up the full set of special characters in Legacy but you can in Word and RootsMagic. Legacy appears to have no interest whatsoever in addressing this. John -Original Message- From: Michele/Support Sent: Sunday, February 08, 2015 10:42 AM To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Alphabet Character set Al, Legacy only supports Western European fonts. This does include quite a few letters with diacritics but some of the Polish characters are not included, like the L with the slash through it. Michele Technical Support mich...@legacyfamilytree.com www.legacyfamilytree.com From: Albert Ignatowski [mailto:alh...@aol.com] Sent: Saturday, January 31, 2015 3:18 PM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Alphabet Character set Hello again, Is it possible to select alphabet character sets other than the default set in Legacy 8? What I an looking for is an alphabet set that includes some of the European characters that have accent marks over consonants such as "n", "s", and the slash mark through "l" as in Polish. Thank you in advance for your help. Al Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4281/9072 - Release Date: 02/07/15 Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.face
Réf. : Re: [LegacyUG] Alphabet Character set
John I sympathize with your situation. If Millennia wants Legacy to be international, they have no choices but make all the international characters available. It is a must. I hope that Millennia will put all the other projects aside and make this long due option their ONLY priority. Otherwise the so call international character of Legacy is a false pretense. Georges ---Message original--- De : johnbernac...@iprimus.com.au Date : 2015-02-07 19:17:55 A : legacyusergroup@LegacyUsers.com Sujet : Re: [LegacyUG] Alphabet Character set I have found âRootsMagicâ have all the Polish characters. It enables you to use all the special characters available in Microsoft Word in the same way as Word does. I have recently downloaded RootsMagic to try out its other capabilities and functions. Special characters are a high priority for me so I am very seriously considering changing from Legacy to RootsMagic. I simply do not understand why you cannot bring up the full set of special characters in Legacy but you can in Word and RootsMagic. Legacy appears to have no interest whatsoever in addressing this. John -Original Message- From: Michele/Support Sent: Sunday, February 08, 2015 10:42 AM To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Alphabet Character set Al, Legacy only supports Western European fonts. This does include quite a few letters with diacritics but some of the Polish characters are not included, like the L with the slash through it. Michele Technical Support mich...@legacyfamilytree.com www.legacyfamilytree.com From: Albert Ignatowski [mailto:alh...@aol.com] Sent: Saturday, January 31, 2015 3:18 PM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Alphabet Character set Hello again, Is it possible to select alphabet character sets other than the default set in Legacy 8? What I an looking for is an alphabet set that includes some of the European characters that have accent marks over consonants such as "n", "s", and the slash mark through "l" as in Polish. Thank you in advance for your help. Al Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4281/9072 - Release Date: 02/07/15 Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Alphabet Character set
I have found “RootsMagic†have all the Polish characters. It enables you to use all the special characters available in Microsoft Word in the same way as Word does. I have recently downloaded RootsMagic to try out its other capabilities and functions. Special characters are a high priority for me so I am very seriously considering changing from Legacy to RootsMagic. I simply do not understand why you cannot bring up the full set of special characters in Legacy but you can in Word and RootsMagic. Legacy appears to have no interest whatsoever in addressing this. John -Original Message- From: Michele/Support Sent: Sunday, February 08, 2015 10:42 AM To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Alphabet Character set Al, Legacy only supports Western European fonts. This does include quite a few letters with diacritics but some of the Polish characters are not included, like the L with the slash through it. Michele Technical Support mich...@legacyfamilytree.com www.legacyfamilytree.com From: Albert Ignatowski [mailto:alh...@aol.com] Sent: Saturday, January 31, 2015 3:18 PM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Alphabet Character set Hello again, Is it possible to select alphabet character sets other than the default set in Legacy 8? What I an looking for is an alphabet set that includes some of the European characters that have accent marks over consonants such as "n", "s", and the slash mark through "l" as in Polish. Thank you in advance for your help. Al Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4281/9072 - Release Date: 02/07/15 Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Alphabet Character set
Al, Legacy only supports Western European fonts. This does include quite a few letters with diacritics but some of the Polish characters are not included, like the L with the slash through it. Michele Technical Support mich...@legacyfamilytree.com www.legacyfamilytree.com From: Albert Ignatowski [mailto:alh...@aol.com] Sent: Saturday, January 31, 2015 3:18 PM To: legacyusergroup@LegacyUsers.com Subject: [LegacyUG] Alphabet Character set Hello again, Is it possible to select alphabet character sets other than the default set in Legacy 8? What I an looking for is an alphabet set that includes some of the European characters that have accent marks over consonants such as "n", "s", and the slash mark through "l" as in Polish. Thank you in advance for your help. Al Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4281/9072 - Release Date: 02/07/15 Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Alphabet Character set
I am still using Legacy 7.5 because of still existing bugs and new bugs introduced when some old one are fixed in Legacy 8. Too many of the reports I need to produce are affected by the bugs, that I cannot rely on Legacy 8. I do not have the time or energy to keep two versions up-to-date which would require double entering everything, I have had to stay with Legacy 7.5. I have downloaded it, and periodically transfer a copy of my latest database into Legacy 8, but, so far, it cannot do what I meed as well as Legacy 7.5 Alas! Anyway, that explanation was so you will know that these instructions are from Legacy 7.5. "The Character Map is used to select characters that are not found on the keyboard. The Character Map can be reached two different ways. The first is by pressing F6 while in any input field. Any characters selected from the Character Map are returned and enter at the current cursor position. The second way to reach the Character Map is to click the small blue button on the Special Characters ribbon on every input screen. The map is then used to select up to eight characters to fill the ribbon. The characters on the ribbon are then immediately available for adding to input fields. See Special Characters for more information. How to Select Characters Double-clicking on any characters in the list, copies the character up to the Characters to Return field at the top. When selecting characters to place in an input field, you can choose as many as you want. For example, if you wanted to enter the word posição you might first enter posi in the field, press F6 and then double-click on the letters ção. This would put the remainder of the word in the Characters to Return field. Clicking the Return Characters button would return the characters and finish the word in the input field. If you are filling the Special Characters ribbon, double-click on up to eight characters that you will be using the most. For example, á é í ó ú ñ." CE > From: bobstr...@gmail.com > To: legacyusergroup@LegacyUsers.com > Subject: Re: [LegacyUG] Alphabet Character set > Date: Sat, 31 Jan 2015 23:26:59 -0500 > > Thanks for that CE. A followup question for you ... > Can you be specific about where one can find/see a complete list of the > characters that ARE recognized by Legacy? > > > Bob Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Alphabet Character set
Thanks for that CE. A followup question for you ... Can you be specific about where one can find/see a complete list of the characters that ARE recognized by Legacy? Bob Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Alphabet Character set
I don't know about Danish, but I do know that pasting the correct characters will not work if Legacy does not recognize them. It does not matter what keyboard you use. If Legacy does not have them in its list, they will not be rendered. That is the big problem; there is no work-around for many, many characters. The Danish characters you listed are included in Legacy's characters, so they will be rendered correctly if you paste them, or if you choose them from the Legacy characters. CE > From: bobstr...@gmail.com > To: legacyusergroup@LegacyUsers.com > Subject: Re: [LegacyUG] Alphabet Character set > Date: Sat, 31 Jan 2015 21:21:16 -0500 > > Here my notes from many years ago. They were written by me, for me, and not > for general audience. I have done a quick review, and it looks pretty good > to me. Written for Danish, but substitute desired language for keyboards > provided. > > > = = = = = = = = = = = = > Danish Research Resources: > Extra letters in Danish alphabet. READ ME FIRST > NOTE: Danish has three extra letters in the alphabet: æ, ø, and å. > “Aftagtsmand” is not the same as “Aftægtsmand”. > “Hans Jorgen” is not the same as “Hans Jørgen”. > “Dab” is not the same as “Dåb”. > Be sure to use the correct character. Some database searches especially in > Danish language, will fail with wrong letter. > > You can: > · Activate the Danish Keyboard (for all Microsoft operating systems). > · Use the 10 key pad, while holding down the Alt key and typing a > code (for all Microsoft operating systems). > · Copy and paste the Danish letters Æ, Ø, and Å from another document > that already has them. > > Instructions for all three methods (Windows XP and Vista)can be found here: > https://familysearch.org/learn/wiki/en/Denmark:_Typing_%C3%86,_%C3%98,_and_%C3%85 > > > I recommend activating the Danish keyboard, easy to toggle back and forth as > needed. > Instructions for changing keyboards on Windows7 are shown below. > When done, use ; ' [ respectively for Æ, Ø, Å > --- > > Configuring Windows 7 and Vista for Danish keyboard. > 1. Click on the Start button. > 2. Click on the Control Panel item. > 3. Select the Language, and Region option. > 4. Select the Regional and Language Option. > 5. Click on the Keyboards and Languages Tab. > 6. Click on the Change Keyboards button. > 7. Click the Add button. > 8. Find the Danish country item you wish to use. You can also select Faeroese > or Greenlandic for the Danish keyboard layout. > 9. Click on the plus sign ("+") to the left of the keyboard. > 10. Click on the box to the left of the keyboard layout, Danish. should get a > checkmark > 11. Click the OK button to select the keyboard layout and close the Add Input > Language dialog box. > 12. Click on the Apply button in the lower right corner of the Text Services > and Input Languages dialog box. > 13. Click on the OK button in the lower right corner of the Text Services and > Input Languages dialog box. > > Using the Danish Keyboard in Windows > a) After activating the Danish keyboard, you should see a little icon in the > notification area (Near time) near right side of your screen that appears as > an EN. > b) When you click on the EN a pop up list appears with the option of choosing > English or Danish. Choose Danish. Now the EN icon has changed to DA > c) As long as the little icon shows DA, you are using a Danish keyboard. The > Danish keyboard provides the Æ, Ø, and Å as follows: > Æ is the ; (or : ) key > Ø is the ‘ (or “ ) key > Å is the [ (or { ) key > > You can type the upper case or lower case of each letter by using holding > down the Shift key as usual. While the Danish keyboard is activated, other > keys have been rearranged as well. > Keyboard language and sticker solutions: > http://www.smartkeyboardsolutions.com/ > > They have Italian, Hebrew, Russian. Do a search for Danish, Polish, and > others. > Also Have LARGE PRINT keyboards, and many various styles for English > keyboards. > = = = = = = = = = = = = = = = = = > > I hope this is useful to someone. > > Bob Hansen Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Alphabet Character set
Here my notes from many years ago. They were written by me, for me, and not for general audience. I have done a quick review, and it looks pretty good to me. Written for Danish, but substitute desired language for keyboards provided. = = = = = = = = = = = = Danish Research Resources: Extra letters in Danish alphabet. READ ME FIRST NOTE: Danish has three extra letters in the alphabet: æ, ø, and å. “Aftagtsmand” is not the same as “Aftægtsmand”. “Hans Jorgen” is not the same as “Hans Jørgen”. “Dab” is not the same as “Dåb”. Be sure to use the correct character. Some database searches especially in Danish language, will fail with wrong letter. You can: · Activate the Danish Keyboard (for all Microsoft operating systems). · Use the 10 key pad, while holding down the Alt key and typing a code (for all Microsoft operating systems). · Copy and paste the Danish letters Æ, Ø, and Å from another document that already has them. Instructions for all three methods (Windows XP and Vista)can be found here: https://familysearch.org/learn/wiki/en/Denmark:_Typing_%C3%86,_%C3%98,_and_%C3%85 I recommend activating the Danish keyboard, easy to toggle back and forth as needed. Instructions for changing keyboards on Windows7 are shown below. When done, use ; ' [ respectively for Æ, Ø, Å --- Configuring Windows 7 and Vista for Danish keyboard. 1. Click on the Start button. 2. Click on the Control Panel item. 3. Select the Language, and Region option. 4. Select the Regional and Language Option. 5. Click on the Keyboards and Languages Tab. 6. Click on the Change Keyboards button. 7. Click the Add button. 8. Find the Danish country item you wish to use. You can also select Faeroese or Greenlandic for the Danish keyboard layout. 9. Click on the plus sign ("+") to the left of the keyboard. 10. Click on the box to the left of the keyboard layout, Danish. should get a checkmark 11. Click the OK button to select the keyboard layout and close the Add Input Language dialog box. 12. Click on the Apply button in the lower right corner of the Text Services and Input Languages dialog box. 13. Click on the OK button in the lower right corner of the Text Services and Input Languages dialog box. Using the Danish Keyboard in Windows a) After activating the Danish keyboard, you should see a little icon in the notification area (Near time) near right side of your screen that appears as an EN. b) When you click on the EN a pop up list appears with the option of choosing English or Danish. Choose Danish. Now the EN icon has changed to DA c) As long as the little icon shows DA, you are using a Danish keyboard. The Danish keyboard provides the Æ, Ø, and Å as follows: Æ is the ; (or : ) key Ø is the ‘ (or “ ) key Å is the [ (or { ) key You can type the upper case or lower case of each letter by using holding down the Shift key as usual. While the Danish keyboard is activated, other keys have been rearranged as well. Keyboard language and sticker solutions: http://www.smartkeyboardsolutions.com/ They have Italian, Hebrew, Russian. Do a search for Danish, Polish, and others. Also Have LARGE PRINT keyboards, and many various styles for English keyboards. = = = = = = = = = = = = = = = = = I hope this is useful to someone. Bob Hansen Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Alphabet Character set
I use Danish characters from my std set of fonts. Windows allows you to make changes to different language keyboards. The language bar settings are on the right side of the Task Bar. It takes one keystroke to toggle between English and Danish. My grandfather is Hans Jørgen Hansen, from Rudjkøbing, Denmark. Note the "ø" in Jørgen and Rudjkøbing, that is from toggling to Danish. Those spellings and characters are OK in Legacy 8. I made personal notes on how to do this, will see if I can locate them and provide here. Bob Hansen Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Alphabet Character set
I have been requesting Eastern European special characters / diacritics for years but Legacy has not even added them to their “special character map”, even in version 8. This is extremely annoying, although I like everything else about Legacy. Legacy do not even indicate they doing anything to address this problem- no estimated time frame- nothing. I want to publish my family history. For years of been keeping a list of incorrectly spelled names of people and places so one day I can save my work as a Word document and do all the “find and replace” actions needed. My list is however growing out of hand. It’s ridiculous and I’m fed up. Even then, that might work if wanted to limit my family to selected bits and pieces for publication in a book, but I could not simply use Legacy to publish everything on a website. It has been a number of years since I have compared genealogy software programs. I think I will revisit this issue and if there is a software program that compares favourably with Legacy while including diacritics, I will change to it. It is gradually becoming easier to trace ancestors in counties like Poland and Eastern Europeans are becoming more interested in genealogy. Countries like the US, UK and Australia have a very multicultural heritage which I feel has been disrespected by Legacy. Unless Legacy caters for various ethnicities or nationalities, it is purely a matter of time before more progressive software is developed by others and takes market share away from Legacy. Why does Legacy not even include Eastern European diacritics in their Special Characters Map and allow people like me to do a “search and replace” within Legacy? I could live with that. John From: CE WOOD Sent: Sunday, February 01, 2015 9:44 AM To: legacyusergroup@LegacyUsers.com Subject: RE: [LegacyUG] Alphabet Character set But at least they could be on the character strip, and, when you could enter them using keystrokes. As it is now, even using the correct keystrokes, Legacy will not enter them. CE > From: emjay...@gmail.com > To: legacyusergroup@LegacyUsers.com > Subject: Re: [LegacyUG] Alphabet Character set > Date: Sun, 1 Feb 2015 00:06:51 +0200 > > On 2015/01/31 10:17 PM, Albert Ignatowski wrote: > > > Is it possible to select alphabet character sets other than the default set > > in Legacy 8? What I an looking for is an alphabet set that includes some of > > the > > European characters that have accent marks over consonants such as "n", "s", > > and the slash mark through "l" as in Polish. > > Adding to what Sherry said, even if Legacy ever got rewritten, you would still > need a Polish version of Windows to be able to comfortably enter and view > these > Polish characters. > > -- > Regards, > Mike Fry (Jhb) Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Alphabet Character set
But at least they could be on the character strip, and, when you could enter them using keystrokes. As it is now, even using the correct keystrokes, Legacy will not enter them. CE > From: emjay...@gmail.com > To: legacyusergroup@LegacyUsers.com > Subject: Re: [LegacyUG] Alphabet Character set > Date: Sun, 1 Feb 2015 00:06:51 +0200 > > On 2015/01/31 10:17 PM, Albert Ignatowski wrote: > > > Is it possible to select alphabet character sets other than the > > default set > > in Legacy 8? What I an looking for is an alphabet set that includes some > > of the > > European characters that have accent marks over consonants such as "n", > > "s", > > and the slash mark through "l" as in Polish. > > Adding to what Sherry said, even if Legacy ever got rewritten, you would still > need a Polish version of Windows to be able to comfortably enter and view > these > Polish characters. > > -- > Regards, > Mike Fry (Jhb) Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Alphabet Character set
On 2015/01/31 10:17 PM, Albert Ignatowski wrote: > Is it possible to select alphabet character sets other than the default > set > in Legacy 8? What I an looking for is an alphabet set that includes some of > the > European characters that have accent marks over consonants such as "n", "s", > and the slash mark through "l" as in Polish. Adding to what Sherry said, even if Legacy ever got rewritten, you would still need a Polish version of Windows to be able to comfortably enter and view these Polish characters. -- Regards, Mike Fry (Jhb) Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Alphabet Character set
Legacy is programmed in VB6, which doesn't support non-Western European fonts. Until the programmers get a chance to reprogram Legacy in a programming language that supports non-Western European fonts, you won't be able to use Eastern European fonts. Sincerely, Sherry Technical Support Legacy Family Tree On Sat, Jan 31, 2015 at 12:17 PM, Albert Ignatowski wrote: > Hello again, > > Is it possible to select alphabet character sets other than the default > set in Legacy 8? What I an looking for is an alphabet set that includes > some of the European characters that have accent marks over consonants such > as "n", "s", and the slash mark through "l" as in Polish. > > Thank you in advance for your help. > > Al Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Alphabet Character set
Hello again, Is it possible to select alphabet character sets other than the default set in Legacy 8? What I an looking for is an alphabet set that includes some of the European characters that have accent marks over consonants such as "n", "s", and the slash mark through "l" as in Polish. Thank you in advance for your help. Al Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyusers.com/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://support.legacyfamilytree.com Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp