On Sun, Jan 05, 2014 at 08:55:13PM -0800, explodingm...@gmail.com wrote:
Same deal. New hardware, working on bringup. It's currently running a
slightly ancient android.
From
http://linux-sunxi.org/Retrieving_device_information#Retrieving_data_over_USB_in_FEL_mode
./fel read 0x4300 0x2 script.bin
works fine.
./bin2fex script.bin script.fex
segfaults.
./fexc script.bin script.fex
returns E: script.bin:1: data must follow a section.
I asked on IRC and was told that script.bin isn't located at that
address until after the bootloader runs, and fel is pre-bootloader,
making this a moot point.
On many devices, this does work. But i too have run into this on my
inet_86vz tablet.
I'm perplexed here - what's the best way to get a known-good copy of
the config for a given board?
The other option is listed as well:
http://linux-sunxi.org/Retrieving_device_information#Using_the_original_OS
You also need to get to android, to get the identification strings:
http://linux-sunxi.org/New_Device_page#Identification
Luc Verhaegen.
--
You received this message because you are subscribed to the Google Groups
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.