Re: Re :Re: [Ltib] ltib error -linux2.6.20.6 with MPC8360E MDS
Jon Loeliger wrote: nanda wrote: Hi Stuart, Thanks for the information. gpp access was resolved. I was successful in building the linux 2.6.11 using the ltib and able to bring up the MPC8360 EMDS. But, I still face the problem for linux kernel 2.6.19 and 2.6.20. When I tried using ltib in the bringing up the board. The MPC 8360 board keeps rebooting after downloading the image Power PC Kernel Image(uImage) and Power PC RAMDisk Image(rootfs.ext2.gz.uboot) build by the ltib Please clarrify on the same. I'm not a kernel expert and don't know what failure you are seeing here, but I might observe that 2.6.19 and .20 are two years old, and 2.6.11 is more than 3 years old. If you think we, collectively, haven't improved things in that time period, please, complain about 2.6.11, .19, and .20. If on the off chance you think things *might* have gotten better due to a *bit* of development effort over the past three years, you might try installing a modern U-Boot and a modern Kernel. Thanks, jdl I would strongly recommend switching to ELDK from denx.de and the latest released (or tip-o-the-tree) u-boot. This will allow you to build and boot the latest kernel with a flattened device tree (FDT). ELDK: http://www.denx.de/wiki/DULG/ELDK http://ftp.denx.de/pub/eldk/ Specifically: http://ftp.denx.de/pub/eldk/4.2/ppc-linux-x86/iso/ u-boot: make MPC8360EMDS_HOST_66_config make linux: Start with: arch/powerpc/configs/83xx/mpc836x_mds_defconfig Trying to use an old u-boot and old toolset with a recent kernel isn't worth the headaches. The ToT supports the MPC8360EMDS directly. Best regards, gvb ___ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
Re :Re: [Ltib] ltib error -linux2.6.20.6 with MPC8360E MDS
Hi Stuart,nbsp;nbsp; Thanks for the information.nbsp;nbsp; gpp access was resolved. nbsp;nbsp; I was successful in building the linux 2.6.11 using the ltib and able to bring up the MPC8360 EMDS.But, I stillnbsp;face the problem for linux kernel 2.6.19 and 2.6.20.nbsp;nbsp;nbsp;When I tried using ltib in thenbsp;bringing up the board.nbsp;nbsp;nbsp;The MPC 8360 board keeps rebooting after downloading the image Power PC Kernel Image(uImage) and Power PC RAMDisk Image(rootfs.ext2.gz.uboot)nbsp;nbsp;build by the ltibnbsp;nbsp; nbsp; Please clarrify on the same.Thanks in advance.Regards,Nandanbsp;nbsp;On Thu, 20 Nov 2008 18:40:36 Stuart Hughes wroteHi Nanda,This is happening because you don't have access tohttp://www.bitshrine.org/gpp for some reason.If LTIB needs to download sources to build a package, it will get themfrom bitshrine.org. Can you check that you are able to access this URLfrom the command line with wget.Regards, StuartOn Thu, 2008-11-20 at 18:30 , nanda wrote:gt; Hi All,gt; Iam forwarding the mail which I have posted to powerpc linux listgt; Linuxppc-dev@ozlabs.orggt; ===gt; gt; Iam getting the below error during the generation ofgt; rootfs.ext2.gz.uboot (Power PC Linux RAM Disk Image) and uImage (Powergt; PC Linux Kernel Image) for linux-2.6.20.6 kernel on the power PC MPCgt; 8360E MDS using ltib tool.gt; gt; Testing ppp_url connectivity: FAIL, disabling gt; gt; Testing gpp_url connectivity: FAIL, disabling gt; gt; No network download connection availablegt; gt; I did the following steps, but Iam unable to generate thegt; rootfs.ext2.gz.uboot gt; gt; - In the ltib directory gt; gt; ./ltib --configuregt; gt; In the configure menu, I specified the following, before saving thegt; configsgt; gt; - Tool chain as (gcc-3.4.3/glibc-2.3.3)gt; gt; - uboot 1.1.3gt; gt; - Kernel (local linux directory build) which refers to the loca lgt; directory where linux-2.6.20.6 is placedgt; gt; - Kernel config filespecified as mpc8360emds_defconfig, which is thegt; file copiedgt; from /home/nanda/linux2.6.20.6/arch/powerpc/configs/mpc8360emds_defconfig to the ltib/config/platform/mpc8360epb directory) gt; gt; - Linux Target Architecture as powerpcgt; gt; After the above process by saving the configuration (it startedgt; building kernel and generated uImage) and failed in the below placegt; (Refer also the attached build.txt file)gt; gt; gt; gt; Processing: skell gt; gt; === gt; gt; Testing ppp_url connectivity: FAIL, disabling gt; gt; Testing gpp_url connectivity: FAIL, disabling gt; gt; No network download connection availablegt; gt; Started: Thu Nov 20 14:44:45 2008 gt; gt; Ended: Thu Nov 20 14:57:32 2008 gt; gt; Elapsed: 767 seconds gt; gt; Build Failedgt; gt; =gt; gt; I have attached the below files for boot and build logs with thisgt; mail, gt; gt; 1) defconfig.dev - default config generated for ./ltib configuregt; from config/platform/mpc8360epb gt; gt; 2) build.txt - Error build during ./ltib configure outputgt; gt; 3) mpc8360emds_defconfig - Default config filegt; from /home/nanda/linux2.6.20.6/arch/powerpc/configs/ gt; gt; The end result was I could only see the uImage generated withoutgt; rootfs.ext2.gz.uboot. Please clarify on the same gt; gt; Thanks in advance,gt; gt; Regards,gt; gt; Nandagt; ___Linuxppc-dev mailing [EMAIL PROTECTED]://ozlabs.org/mailman/listinfo/linuxppc-dev___ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
Re: Re :Re: [Ltib] ltib error -linux2.6.20.6 with MPC8360E MDS
Hi Nanda, You'll need to get help from the kernel experts with this issue. Regards, Stuart On Fri, 2008-11-21 at 14:16 +, nanda wrote: Hi Stuart, Thanks for the information. gpp access was resolved. I was successful in building the linux 2.6.11 using the ltib and able to bring up the MPC8360 EMDS. But, I still face the problem for linux kernel 2.6.19 and 2.6.20. When I tried using ltib in the bringing up the board. The MPC 8360 board keeps rebooting after downloading the image Power PC Kernel Image(uImage) and Power PC RAMDisk Image(rootfs.ext2.gz.uboot) build by the ltib Please clarrify on the same. Thanks in advance. Regards, Nanda On Thu, 20 Nov 2008 18:40:36 Stuart Hughes wrote Hi Nanda, This is happening because you don't have access to http://www.bitshrine.org/gpp for some reason. If LTIB needs to download sources to build a package, it will get them from bitshrine.org. Can you check that you are able to access this URL from the command line with wget. Regards, Stuart On Thu, 2008-11-20 at 18:30 , nanda wrote: Hi All, Iam forwarding the mail which I have posted to powerpc linux list Linuxppc-dev@ozlabs.org === Iam getting the below error during the generation of rootfs.ext2.gz.uboot (Power PC Linux RAM Disk Image) and uImage (Power PC Linux Kernel Image) for linux-2.6.20.6 kernel on the power PC MPC 8360E MDS using ltib tool. Testing ppp_url connectivity: FAIL, disabling Testing gpp_url connectivity: FAIL, disabling No network download connection available I did the following steps, but Iam unable to generate the rootfs.ext2.gz.uboot - In the ltib directory ./ltib --configure In the configure menu, I specified the following, before saving the configs - Tool chain as (gcc-3.4.3/glibc-2.3.3) - uboot 1.1.3 - Kernel (local linux directory build) which refers to the local directory where linux-2.6.20.6 is placed - Kernel config filespecified as mpc8360emds_defconfig, which is the file copied from /home/nanda/linux2.6.20.6/arch/powerpc/configs/mpc8360emds_defconfig to the ltib/config/platform/mpc8360epb directory) - Linux Target Architecture as powerpc After the above process by saving the configuration (it started building kernel and generated uImage) and failed in the below place (Refer also the attached build.txt file) Processing: skell === Testing ppp_url connectivity: FAIL, disabling Testing gpp_url connectivity: FAIL, disabling No network download connection available Started: Thu Nov 20 14:44:45 2008 Ended: Thu Nov 20 14:57:32 2008 Elapsed: 767 seconds Build Failed = I have attached the below files for boot and build logs with this mail, 1) defconfig.dev - default config generated for ./ltib configure from config/platform/mpc8360epb 2) build.txt - Error build during ./ltib configure output 3) mpc8360emds_defconfig - Default config file from /home/nanda/linux2.6.20.6/arch/powerpc/configs/ The end result was I could only see the uImage generated without rootfs.ext2.gz.uboot. Please clarify on the same Thanks in advance, Regards, Nanda ___ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev Rediff Shopping ___ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
ltib error -linux2.6.20.6 with MPC8360E MDS
Hi All,nbsp;nbsp; Iam forwarding the mail which I have posted to powerpc linux listnbsp;[EMAIL PROTECTED]nbsp; Iam getting the below error during the generation of rootfs.ext2.gz.uboot (Power PC Linux RAM Disk Image) and uImage (Power PC Linux Kernel Image) for linux-2.6.20.6 kernel on the power PC MPC 8360E MDS using ltib tool.Testing ppp_url connectivity: FAIL, disabling Testing gpp_url connectivity: FAIL, disabling No network download connection availableI did the following steps, but Iam unable to generate the rootfs.ext2.gz.uboot - In the ltib directory ./ltib --configureIn the configure menu, I specified the following, before saving the configs- Tool chain as (gcc-3.4.3/glibc-2.3.3)- uboot 1.1.3- Kernel (local linux directory build) which refers to the local directory where linux-2.6.20.6 is placed- Kernel config filespecified as mpc8360emds_defconfig, which is the file copied from /home/nanda/linux2.6.2 0.6/arch/powerpc/configs/mpc8360emds_defconfig to the ltib/config/platform/mpc8360epb directory) - Linux Target Architecture as powerpcAfter the above process by saving the configuration (it started building kernel and generated uImage) and failed in the below place (Refer also the attached build.txt file)Processing: skell === Testing ppp_url connectivity: FAIL, disabling Testing gpp_url connectivity: FAIL, disabling No network download connection availableStarted: Thu Nov 20 14:44:45 2008 Ended: Thu Nov 20 14:57:32 2008 Elapsed: 767 seconds Build Failed=I have attached the below files for boot and build logs with this mail, 1) defconfig.dev - default config generated for ./ltib configure from config/platform/mpc8360epb 2) build.txt - Error build during ./ltib configure output3) mpc8360emds_defconfig - Default config file from /home/nanda/linux2.6.20.6/arch/powerpc/configs/ The end resu lt was I could only see the uImage generated without rootfs.ext2.gz.uboot. Please clarify on the same Thanks in advance,Regards,Nanda LD init/built-in.o LD vmlinux SYSMAP System.map MODPOST vmlinux WRAParch/powerpc/boot/uImage Image Name: Linux-2.6.20.6 Created: Thu Nov 20 14:54:04 2008 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size:1205859 Bytes = 1177.60 kB = 1.15 MB Load Address: 0x Entry Point: 0x + grep -q '^CONFIG_MODULES=' /home/nanda/linux-2.6.20.6//../kbuild/mpc8360epb/.config + make ARCH=powerpc CROSS_COMPILE= 'HOSTCC=/usr/bin/gcc -B/usr/bin//' modules Using /home/nanda/linux-2.6.20.6 as source for kernel GEN /home/nanda/kbuild/mpc8360epb/Makefile CHK include/linux/version.h CHK include/linux/utsrelease.h CC [M] crypto/ecb.o Building modules, stage 2. MODPOST 1 modules CC crypto/ecb.mod.o LD [M] crypto/ecb.ko + '[' powerpc = powerpc -a -d '/home/nanda/linux-2.6.20.6//%{dtc_path}' ']' + exit 0 Executing(%install): /bin/sh -e /home/nanda/BoardBringUp/ltib-mpc8360epb-20061208/tmp/rpm-tmp.94803 + umask 022 + cd /home/nanda/BoardBringUp/ltib-mpc8360epb-20061208/rpm/BUILD + KSRC_DIR=/home/nanda/linux-2.6.20.6/ + cd /home/nanda/linux-2.6.20.6/ ++ pwd + KSRC_DIR=/home/nanda/linux-2.6.20.6 ++ eval echo '$PKG_KERNEL_PATH_PRECONFIG/../kbuild/$PLATFORM' +++ echo /home/nanda/linux-2.6.20.6//../kbuild/mpc8360epb + KBOUT=/home/nanda/linux-2.6.20.6//../kbuild/mpc8360epb + KBOUT=/home/nanda/linux-2.6.20.6//../kbuild/mpc8360epb + '[' /home/nanda/linux-2.6.20.6//../kbuild/mpc8360epb '!=' . ']' + export KBUILD_OUTPUT=/home/nanda/linux-2.6.20.6//../kbuild/mpc8360epb + KBUILD_OUTPUT=/home/nanda/linux-2.6.20.6//../kbuild/mpc8360epb + grep -q CONFIG_PPC_MERGE=y /home/nanda/linux-2.6.20.6//../kbuild/mpc8360epb/.config + LINTARCH=powerpc + case $LINTARCH in + BOOT_KERNEL=arch/powerpc/boot/uImage + grep -q CONFIG_PPCMERGE=y /home/nanda/linux-2.6.20.6//../kbuild/mpc8360epb/.config + rm -rf /home/nanda/BoardBringUp/ltib-mpc8360epb-20061208/tmp/kernel + mkdir -p /home/nanda/BoardBringUp/ltib-mpc8360epb-20061208/tmp/kernel//opt/freescale/rootfs/powerpc/boot + cd /home/nanda/linux-2.6.20.6//../kbuild/mpc8360epb + SYSCFG_BOOT_KERNEL=arch/powerpc/boot/uImage + '[' -n '' ']' + for i in vmlinux System.map '$SYSCFG_BOOT_KERNEL' + cp vmlinux /home/nanda/BoardBringUp/ltib-mpc8360epb-20061208/tmp/kernel//opt/freescale/rootfs/powerpc/boot/ + for i in vmlinux System.map '$SYSCFG_BOOT_KERNEL' + cp System.map /home/nanda/BoardBringUp/ltib-mpc8360epb-20061208/tmp/kernel//opt/freescale/rootfs/powerpc/boot/ + for i in vmlinux System.map '$SYSCFG_BOOT_KERNEL' + cp arch/powerpc/boot/uImage /home/nanda/BoardBringUp/ltib-mpc8360epb-20061208/tmp/kernel//opt/freescale/rootfs/powerpc/boot/ ++ basename arch/powerpc/boot/uImage + ln -s uImage /home/nanda/BoardBringUp/ltib-mpc8360epb-20061208/tmp/kernel//opt/freescale/rootfs/powerpc/boot/bootable_kernel + cp .config
Re: [Ltib] ltib error -linux2.6.20.6 with MPC8360E MDS
Hi Nanda, This is happening because you don't have access to http://www.bitshrine.org/gpp for some reason. If LTIB needs to download sources to build a package, it will get them from bitshrine.org. Can you check that you are able to access this URL from the command line with wget. Regards, Stuart On Thu, 2008-11-20 at 18:30 +, nanda wrote: Hi All, Iam forwarding the mail which I have posted to powerpc linux list Linuxppc-dev@ozlabs.org === Iam getting the below error during the generation of rootfs.ext2.gz.uboot (Power PC Linux RAM Disk Image) and uImage (Power PC Linux Kernel Image) for linux-2.6.20.6 kernel on the power PC MPC 8360E MDS using ltib tool. Testing ppp_url connectivity: FAIL, disabling Testing gpp_url connectivity: FAIL, disabling No network download connection available I did the following steps, but Iam unable to generate the rootfs.ext2.gz.uboot - In the ltib directory ./ltib --configure In the configure menu, I specified the following, before saving the configs - Tool chain as (gcc-3.4.3/glibc-2.3.3) - uboot 1.1.3 - Kernel (local linux directory build) which refers to the local directory where linux-2.6.20.6 is placed - Kernel config filespecified as mpc8360emds_defconfig, which is the file copied from /home/nanda/linux2.6.20.6/arch/powerpc/configs/mpc8360emds_defconfig to the ltib/config/platform/mpc8360epb directory) - Linux Target Architecture as powerpc After the above process by saving the configuration (it started building kernel and generated uImage) and failed in the below place (Refer also the attached build.txt file) Processing: skell === Testing ppp_url connectivity: FAIL, disabling Testing gpp_url connectivity: FAIL, disabling No network download connection available Started: Thu Nov 20 14:44:45 2008 Ended: Thu Nov 20 14:57:32 2008 Elapsed: 767 seconds Build Failed = I have attached the below files for boot and build logs with this mail, 1) defconfig.dev - default config generated for ./ltib configure from config/platform/mpc8360epb 2) build.txt - Error build during ./ltib configure output 3) mpc8360emds_defconfig - Default config file from /home/nanda/linux2.6.20.6/arch/powerpc/configs/ The end result was I could only see the uImage generated without rootfs.ext2.gz.uboot. Please clarify on the same Thanks in advance, Regards, Nanda ___ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev