Re: [pfSense] 2.2-RELEASE now available!
Tim lists@... writes: The Update worked like charm. Many thanks to the devs for all the great work! Now I started to install packages and get the following error after installing HAVP: Warning: file_put_contents(/usr/local/etc/havp/havp_conf.xml): failed to open stream: No such file or directory in /usr/local/pkg/havp.inc on line 604 This error occurs on top of the HAVP-config-pages. Regards Tim Chris Buechler cmb@... hat am 24. Januar 2015 um 03:24 geschrieben: Details on the blog: https://blog.pfsense.org/?p=1546 ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold I got this same error message. I freshly installed pfsense 2.2, no upgrade. HAVP was the first package I installed, and i got the same error! There is no such folder in my system: /usr/local/etc/havp... I enabled the http-proxy server from antivirus config. Do I still need to install Squid or something else? ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
Hey Seth, On Mon, Jan 26, 2015 at 8:38 AM, Seth Mos seth@dds.nl wrote: Sorry to reply to myself here, but 2.2 in combination with the Intel X540-2 card isn't very stable. The card keeps dropping the Phy which is fine on 2.1.5. That's surprising, we've seen much better results on our systems with ix cards, and I know of one system where they push near 2 Gbps across tens to hundreds of thousands of simultaneous connections through ix and have had great results where with 2.1.5 they were at times hitting the limit of what pf could push. They have a good deal of head room to spare now. You using any of those cards on stock FreeBSD? I think most of the Intel 10G cards we have are X520 rather than 540, which might be the difference. [zone: mbuf_jumbo_9k] kern.ipc.nmbjumbo9 limit reached ix1: Could not setup receive structures That didn't happen on 2.1.5 at all, apparently the limits have changed. In FreeBSD 10 these changes need to into loader.conf during boot, different from before. https://pleiades.ucsc.edu/hyades/FreeBSD_Network_Tuning kern.ipc.nmbclusters=262144 kern.ipc.nmbjumbop=262144 kern.ipc.nmbjumbo9=65536 kern.ipc.nmbjumbo16=32768 Some of that does like higher limits in 10.x. Though some of that actually isn't much different from 8.x/2.1.5, like I'm surprised you were getting by with 262144 mbufs. We've taken to gnn@'s million packet march as they referred to it at a past employer of his, and recommended nmbclusters=100 in the NIC tuning guide. https://doc.pfsense.org/index.php/Tuning_and_Troubleshooting_Network_Cards#Intel_ix.284.29_Cards We've seen some bad behavior with low-ish nmbclusters on ix NICs which are similar to what you describe, I'm curious if things would be fine if you bumped nmbclusters to 1 million. You have a test setup where you could try that on the specific hardware you're using? ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
[pfSense] 2.2-RELEASE now available! with lots of problem like squid and squid guard not working properly. Thanks A Mohan Rao +91 98260 61122 On Sat, Jan 24, 2015 at 7:54 AM, Chris Buechler c...@pfsense.com wrote: Details on the blog: https://blog.pfsense.org/?p=1546 ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
On Mon, Jan 26, 2015 at 6:26 AM, Doug Lytle supp...@drdos.info wrote: I've also noted this morning that the 3 systems I've upgraded, all of them have lost their limiter rules. I've read the release notes, nothing that I saw stated they'd be removed. Limiters won't be removed. Check your config history, DiagBackup/restore, Config History tab. Hopefully you still have a revision there pre-upgrade. Use the diff functionality there to see where that changed. By lost their limiter rules, what specifically do you mean? The limiters are gone from FirewallTraffic Shaper, Limiters? The rules that were using them are gone? Their specification in the rule that was there is now missing? ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
Chris Buechler wrote: what specifically do you mean? The limiters are gone from FirewallTraffic Shaper, Limiters? Correct. It was as if I had never set it. Since it's my home firewall, wasn't a big deal, just thought I'd let someone know. Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
On Jan 26, 2015, at 6:43 AM, Tim Hogan t...@hoganzoo.com wrote: After running those commands all of my previous data was available. Cool! I'll give that a go, Doug ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
I've also noted this morning that the 3 systems I've upgraded, all of them have lost their limiter rules. I've read the release notes, nothing that I saw stated they'd be removed. Doug ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
Sorry to reply to myself here, but 2.2 in combination with the Intel X540-2 card isn't very stable. The card keeps dropping the Phy which is fine on 2.1.5. I've just reverted and reinstalled 2.1.5 with a backup config. Although the nmbclusters change did make the 2nd port of the ix card power on it eventually hung the network after half an hour or so. Due diligence. Regards, Seth Seth Mos schreef op 26-1-2015 om 11:12: Chris Buechler schreef op 24-1-2015 om 3:24: Details on the blog: https://blog.pfsense.org/?p=1546 2 Upgrades done so far, one had a different Architecture autoupdate URL, that one updated from AMD64 to i386, please don't do that. Also, I have issues with the Intel X540-2 10G card now, it's throwing a few errors. Port 0 goes into a flapping state while port 1 never comes up. [zone: mbuf_jumbo_9k] kern.ipc.nmbjumbo9 limit reached ix1: Could not setup receive structures That didn't happen on 2.1.5 at all, apparently the limits have changed. In FreeBSD 10 these changes need to into loader.conf during boot, different from before. https://pleiades.ucsc.edu/hyades/FreeBSD_Network_Tuning kern.ipc.nmbclusters=262144 kern.ipc.nmbjumbop=262144 kern.ipc.nmbjumbo9=65536 kern.ipc.nmbjumbo16=32768 Regards, Seth ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
Chris Buechler schreef op 24-1-2015 om 3:24: Details on the blog: https://blog.pfsense.org/?p=1546 2 Upgrades done so far, one had a different Architecture autoupdate URL, that one updated from AMD64 to i386, please don't do that. Also, I have issues with the Intel X540-2 10G card now, it's throwing a few errors. Port 0 goes into a flapping state while port 1 never comes up. [zone: mbuf_jumbo_9k] kern.ipc.nmbjumbo9 limit reached ix1: Could not setup receive structures That didn't happen on 2.1.5 at all, apparently the limits have changed. In FreeBSD 10 these changes need to into loader.conf during boot, different from before. https://pleiades.ucsc.edu/hyades/FreeBSD_Network_Tuning kern.ipc.nmbclusters=262144 kern.ipc.nmbjumbop=262144 kern.ipc.nmbjumbo9=65536 kern.ipc.nmbjumbo16=32768 Regards, Seth ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
Le 24 janv. 2015 à 03:24, Chris Buechler c...@pfsense.com a écrit : Details on the blog: https://blog.pfsense.org/?p=1546 ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold Congratulation to the pfSense team for the quality of the update : Beside snort and couple of other packet re-install, the update is very smooth, filled with new features and one click away. I have rarely seen such a good updates anywhere else. Bravo ! «?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§ Your provider of OpenSource Appliances www.osnet.eu «?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§ PGP ID -- 0x1BA3C2FD ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
I was able to get vnstat to work by running the following commands cd /var mkdir lib cd lib ln -s /cf/conf/vnstat After running those commands all of my previous data was available. Regards, Tim On 1/25/2015 3:54 AM, Doug Lytle wrote: Brian Caouette wrote: Lightsquid and vnstat2 do not work with 2.2 Can anyone else confirm? I cannot comment on Lightsquid, but I can confirm my vnstat2 is non-functional. I've just re-installed the package, I'll see if that fixes it. Doug ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
Doug Lytle wrote: 've just re-installed the package, I'll see if that fixes it. Also of note: Options selected for interfaces to monitor and log rotation never get saved. Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
The Update worked like charm. Many thanks to the devs for all the great work! Now I started to install packages and get the following error after installing HAVP: Warning: file_put_contents(/usr/local/etc/havp/havp_conf.xml): failed to open stream: No such file or directory in /usr/local/pkg/havp.inc on line 604 This error occurs on top of the HAVP-config-pages. Regards Tim Chris Buechler c...@pfsense.com hat am 24. Januar 2015 um 03:24 geschrieben: Details on the blog: https://blog.pfsense.org/?p=1546 ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
I tried it and on an overnight auto upgrade - in the morning Asterisk was there. Not tested, but the code is there. So far so good on the rest. Bob G On 01/25/2015 01:47 AM, Bob Gustafson wrote: Has anyone tried Asterisk? On 01/24/2015 08:05 PM, Brian Caouette wrote: Lightsquid and vnstat2 do not work with 2.2 Can anyone else confirm? Sent from my iPad On Jan 24, 2015, at 8:39 PM, Jon Gerdes gerd...@blueloop.net wrote: 2.2 Cheers cmb 'n' troops. Great piece of work. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
Has anyone tried Asterisk? On 01/24/2015 08:05 PM, Brian Caouette wrote: Lightsquid and vnstat2 do not work with 2.2 Can anyone else confirm? Sent from my iPad On Jan 24, 2015, at 8:39 PM, Jon Gerdes gerd...@blueloop.net wrote: 2.2 Cheers cmb 'n' troops. Great piece of work. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE now available!
Lightsquid and vnstat2 do not work with 2.2 Can anyone else confirm? Sent from my iPad On Jan 24, 2015, at 8:39 PM, Jon Gerdes gerd...@blueloop.net wrote: 2.2 Cheers cmb 'n' troops. Great piece of work. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
[pfSense] 2.2-RELEASE now available!
Details on the blog: https://blog.pfsense.org/?p=1546 ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold