-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, Jul 22, 2007 at 11:06:44PM -0500, Denny White spake forth:
I have an old Belkin F6C525-SER ups attached to serial port 1.
When /usr/local/bin/upsdrvctl start runs, it finds identifies
the ups correctly. Also, no problem when /usr/local/sbin/upsd
runs. But, when /usr/local/sbin/upsmon runs, I get:
Broadcast Message from [EMAIL PROTECTED]
((not a tty)) at whatever time run . . .
communications lost to the UPS
Repeat 1st line (Broadcast etc)
A UPS is unavailable (can't be contacted for monitoring)
Below are all the pertinent uncommented settings in nuts config
files.
(snippet from /etc/nut/ups.conf)
I've tried entering different labels here, including the actual
identification of the ups, F6C525-SER along with anywhere else
it's required to match. Didn't help. I assumed this was an
arbitrary setting only mattered in that it has to match in
any other config files it's used in.
[belkinups]
driver = belkin
port = /dev/tty00
desc = bubbhasbox
(snippet from /etc/nut/upsd.conf)
ACL all 0.0.0.0/0
ACL localhost 127.0.0.1
ACCEPT localhost
REJECT all
# ==
MAXAGE 15
(snippet from /etc/nut/upsd.users)
[dennyboy]
password =
allowfrom = localhost
actions = SET
instcmds = ALL
upsmon master
#
# The matching MONITOR line in your upsmon.conf would look like this:
#
# MONITOR [EMAIL PROTECTED] 1 monuser pass master (or slave)
(snippet from /etc/nut/upsmon.conf)
RUN_AS_USER nutmon# This user added as per docs
MONITOR [EMAIL PROTECTED]:5678 1 dennyboy master
I've also tried this without a port after localhost. No difference.
Still doesn't work. I may have misunderstood the docs, but there
were instructions without a port being appended also.
# --
MINSUPPLIES 1
# --
SHUTDOWNCMD /sbin/shutdown -h -p +0
# --
NOTIFYCMD /usr/local/bin/notifyme.sh
# --
POLLFREQ 10
# --
POLLFREQALERT 10
# --
HOSTSYNC 15
# --
DEADTIME 30
# --
POWERDOWNFLAG /etc/killpower
# Pertinent script added to /etc/rc.shutdown as per docs
# --
NOTE: I changed each instance of %s to belkinups just like the
label in ups.conf
#
NOTIFYMSG NOCOMM A UPS is unavailable (can't be contacted for monitoring)
NOTIFYMSG COMMOK Communications established with UPS
NOTIFYMSG COMMBAD Communications lost to the UPS
NOTIFYMSG ONLINE UPS belkinups is getting line power
NOTIFYMSG ONBATT Someone pulled the plug on belkinups
NOTIFYMSG LOWBATT UPS belkinups has a low battery
NOTIFYMSG FSD UPS is being shutdown by the master
#
# Note that %s is replaced with the identifier of the UPS in question.
# --
RBWARNTIME 43200
# --
NOCOMMWARNTIME 300
# --
FINALDELAY 5
Just wanted to say that I've read the docs man pages numerous times
searched extensively through mailing list archives, experimented
with the settings until I ran out of ideas, before asking about this
on the list. It's either something I'm missing, misunderstanding, or
possibly a peculiarity with my hardware. Any help greatly appreciated.
Denny White
Never got an answer on this problem, but I resolved it it's working
fine now. Apparently I didn't read enough, at least in the right place.
For the sake of anyone who runs into the same problem, got what I
needed at:
http://www.networkupstools.org/doc/2.0.1/INSTALL.html
Denny White
--
___ ___
/ __/ _ \/ __/__ /
_\ \/ // / _//___/ /
/___//_/ /_/
[ 1987 - 2007 ]
http://sdf.lonestar.org
Public Access Unix System
===
GnuPG key : 0x1644E79A | http://wwwkeys.nl.pgp.net
Fingerprint: D0A9 AD44 1F10 E09E 0E67 EC25 CB44 F2E5 1644 E79A
===
iD8DBQFGp7Vly0Ty5RZE55oRAvOQAKCivWSNF/z4EJwC+yLa5836Ney2QACZAUdf
KKE5FrTOjpURUeu1KkV0R1k=
=Yfzx
-END PGP SIGNATURE-
