RE: snmptrapd not processing v3 traps
Jason, Would you mind expanding on this. Would you mind providing a sample on what you put in for authUser and CreateUser to overcome the need of having to enter an engineID for every system. Thanks so much, Geoff.. From: Jason Pope [mailto:jp...@bats.com] Sent: Monday, 6 October 2014 6:47 PM To: Jason Pope; Bill Fenner Cc: net-snmp-coders@lists.sourceforge.net; net-snmp-us...@lists.sourceforge.net Subject: RE: snmptrapd not processing v3 traps Ok … I have got it to work. I forgot to add in the authUser line :-P Also set it up without the engine ID and it works just with the username and auth details. Regards, Jason Pope From: Jason Pope [mailto:jp...@bats.com] Sent: 06 October 2014 10:09 To: Bill Fenner Cc: net-snmp-coders@lists.sourceforge.net mailto:net-snmp-coders@lists.sourceforge.net ; net-snmp-us...@lists.sourceforge.net mailto:net-snmp-us...@lists.sourceforge.net Subject: RE: snmptrapd not processing v3 traps Bill, I had a look at the doc and no matter what I have done it still does not seem to work. I have tried multiple combinations of engineID with a 0x and not in front. Putting the Id in or not. With our without Auth and Priv …. Still nothing comes though. I can see in the debug the info : dumph_recv: msgAuthoritativeEngineID dumpx_recv: 04 0A F5 71 7F 00 1C 73 01 65 27 00 and I have put this in the config : createUser -e 040AF5717F001C7301652700 myuser SHA foo AES bar as well as putting an 0x in front … and still nothing … Regards, Jason Pope From: Bill Fenner [mailto:fen...@gmail.com] Sent: 03 October 2014 21:16 To: Jason Pope Cc: net-snmp-coders@lists.sourceforge.net mailto:net-snmp-coders@lists.sourceforge.net ; net-snmp-us...@lists.sourceforge.net mailto:net-snmp-us...@lists.sourceforge.net Subject: Re: snmptrapd not processing v3 traps On Fri, Oct 3, 2014 at 11:06 AM, Jason Pope jp...@bats.com mailto:jp...@bats.com wrote: Hi, Has anyone successfully set up snmptrapd to accept v3 traps from a device ? I have tried to set it up, but I see nothing in the log when the device sends v3 traps. When configured to send v2 traps you can see them in the logs. I have set up the createUser line in the snmptrapd.conf file according to the net-snmp wiki, but still not getting anything. You have to have one createUser per device you're receiving traps from, with the device's engineId specified. (Or switch to informs, in which case you have to create the user on each device you're sending traps from, and let it discover or tell it the engineId of the trap receiver.) (A little more background: http://www.net-snmp.org/tutorial/tutorial-5/commands/snmptrap-v3.html) Bill We are running version 5.7.2.1 Thanks Regards, Jason Pope BATS Trading Limited is a Recognised Investment Exchange regulated by the Financial Conduct Authority. BATS Trading Limited is an indirect wholly-owned subsidiary of BATS Global Markets, Inc. and is a company registered in England and Wales with Company Number 6547680 and registered office at 10 Lower Thames Street, London EC3R 6AF. Confidentiality Notice: This email, including attachments, may include non-public, proprietary, confidential or legally privileged information. If you are not an intended recipient or an authorized agent of an intended recipient, you are hereby notified that any dissemination, distribution or copying of the information contained in or transmitted with this e-mail is unauthorized and strictly prohibited. If you have received this email in error, please notify the sender by replying to this message and permanently delete this e-mail, its attachments, and any copies of it immediately – you should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you. -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311 http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk iu=/4140/ostg.clktrk ___ Net-snmp-users mailing list net-snmp-us...@lists.sourceforge.net mailto:net-snmp-us...@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users BATS Trading Limited is a Recognised Investment Exchange regulated by the Financial Conduct Authority. BATS Trading Limited is an indirect wholly-owned subsidiary of BATS Global Markets, Inc. and is a company registered in England and Wales
snmptrapd not processing v3 traps
Hi, Has anyone successfully set up snmptrapd to accept v3 traps from a device ? I have tried to set it up, but I see nothing in the log when the device sends v3 traps. When configured to send v2 traps you can see them in the logs. I have set up the createUser line in the snmptrapd.conf file according to the net-snmp wiki, but still not getting anything. We are running version 5.7.2.1 Thanks Regards, Jason Pope BATS Trading Limited is a Recognised Investment Exchange regulated by the Financial Conduct Authority. BATS Trading Limited is an indirect wholly-owned subsidiary of BATS Global Markets, Inc. and is a company registered in England and Wales with Company Number 6547680 and registered office at 10 Lower Thames Street, London EC3R 6AF. Confidentiality Notice: This email, including attachments, may include non-public, proprietary, confidential or legally privileged information. If you are not an intended recipient or an authorized agent of an intended recipient, you are hereby notified that any dissemination, distribution or copying of the information contained in or transmitted with this e-mail is unauthorized and strictly prohibited. If you have received this email in error, please notify the sender by replying to this message and permanently delete this e-mail, its attachments, and any copies of it immediately – you should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you. -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho___ Net-snmp-coders mailing list Net-snmp-coders@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
RE: snmptrapd not processing v3 traps
Geoff, Basically have a switch sending SNMP traps. It does have an engine ID set. All I have set in my snmptrapd.conf is : createUser myuser SHA foo AES bar authUser log,execute,net myuser And that just works …. Will try it for more than one switch, but so far no issues. Regards, Jason Pope From: Geoff Kingsmill [mailto:gkingsm...@yahoo.com] Sent: 06 October 2014 10:34 To: Jason Pope; 'Bill Fenner' Cc: net-snmp-coders@lists.sourceforge.net; net-snmp-us...@lists.sourceforge.net Subject: RE: snmptrapd not processing v3 traps Jason, Would you mind expanding on this. Would you mind providing a sample on what you put in for authUser and CreateUser to overcome the need of having to enter an engineID for every system. Thanks so much, Geoff.. From: Jason Pope [mailto:jp...@bats.com] Sent: Monday, 6 October 2014 6:47 PM To: Jason Pope; Bill Fenner Cc: net-snmp-coders@lists.sourceforge.netmailto:net-snmp-coders@lists.sourceforge.net; net-snmp-us...@lists.sourceforge.netmailto:net-snmp-us...@lists.sourceforge.net Subject: RE: snmptrapd not processing v3 traps Ok … I have got it to work. I forgot to add in the authUser line :-P Also set it up without the engine ID and it works just with the username and auth details. Regards, Jason Pope From: Jason Pope [mailto:jp...@bats.com] Sent: 06 October 2014 10:09 To: Bill Fenner Cc: net-snmp-coders@lists.sourceforge.netmailto:net-snmp-coders@lists.sourceforge.net; net-snmp-us...@lists.sourceforge.netmailto:net-snmp-us...@lists.sourceforge.net Subject: RE: snmptrapd not processing v3 traps Bill, I had a look at the doc and no matter what I have done it still does not seem to work. I have tried multiple combinations of engineID with a 0x and not in front. Putting the Id in or not. With our without Auth and Priv …. Still nothing comes though. I can see in the debug the info : dumph_recv: msgAuthoritativeEngineID dumpx_recv: 04 0A F5 71 7F 00 1C 73 01 65 27 00 and I have put this in the config : createUser -e 040AF5717F001C7301652700 myuser SHA foo AES bar as well as putting an 0x in front … and still nothing … Regards, Jason Pope From: Bill Fenner [mailto:fen...@gmail.com] Sent: 03 October 2014 21:16 To: Jason Pope Cc: net-snmp-coders@lists.sourceforge.netmailto:net-snmp-coders@lists.sourceforge.net; net-snmp-us...@lists.sourceforge.netmailto:net-snmp-us...@lists.sourceforge.net Subject: Re: snmptrapd not processing v3 traps On Fri, Oct 3, 2014 at 11:06 AM, Jason Pope jp...@bats.commailto:jp...@bats.com wrote: Hi, Has anyone successfully set up snmptrapd to accept v3 traps from a device ? I have tried to set it up, but I see nothing in the log when the device sends v3 traps. When configured to send v2 traps you can see them in the logs. I have set up the createUser line in the snmptrapd.conf file according to the net-snmp wiki, but still not getting anything. You have to have one createUser per device you're receiving traps from, with the device's engineId specified. (Or switch to informs, in which case you have to create the user on each device you're sending traps from, and let it discover or tell it the engineId of the trap receiver.) (A little more background: http://www.net-snmp.org/tutorial/tutorial-5/commands/snmptrap-v3.html) Bill We are running version 5.7.2.1 Thanks Regards, Jason Pope BATS Trading Limited is a Recognised Investment Exchange regulated by the Financial Conduct Authority. BATS Trading Limited is an indirect wholly-owned subsidiary of BATS Global Markets, Inc. and is a company registered in England and Wales with Company Number 6547680 and registered office at 10 Lower Thames Street, London EC3R 6AF. Confidentiality Notice: This email, including attachments, may include non-public, proprietary, confidential or legally privileged information. If you are not an intended recipient or an authorized agent of an intended recipient, you are hereby notified that any dissemination, distribution or copying of the information contained in or transmitted with this e-mail is unauthorized and strictly prohibited. If you have received this email in error, please notify the sender by replying to this message and permanently delete this e-mail, its attachments, and any copies of it immediately – you should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you. -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ Net-snmp-users mailing list net-snmp-us
RE: snmptrapd not processing v3 traps
Bill, I had a look at the doc and no matter what I have done it still does not seem to work. I have tried multiple combinations of engineID with a 0x and not in front. Putting the Id in or not. With our without Auth and Priv …. Still nothing comes though. I can see in the debug the info : dumph_recv: msgAuthoritativeEngineID dumpx_recv: 04 0A F5 71 7F 00 1C 73 01 65 27 00 and I have put this in the config : createUser -e 040AF5717F001C7301652700 myuser SHA foo AES bar as well as putting an 0x in front … and still nothing … Regards, Jason Pope From: Bill Fenner [mailto:fen...@gmail.com] Sent: 03 October 2014 21:16 To: Jason Pope Cc: net-snmp-coders@lists.sourceforge.net; net-snmp-us...@lists.sourceforge.net Subject: Re: snmptrapd not processing v3 traps On Fri, Oct 3, 2014 at 11:06 AM, Jason Pope jp...@bats.commailto:jp...@bats.com wrote: Hi, Has anyone successfully set up snmptrapd to accept v3 traps from a device ? I have tried to set it up, but I see nothing in the log when the device sends v3 traps. When configured to send v2 traps you can see them in the logs. I have set up the createUser line in the snmptrapd.conf file according to the net-snmp wiki, but still not getting anything. You have to have one createUser per device you're receiving traps from, with the device's engineId specified. (Or switch to informs, in which case you have to create the user on each device you're sending traps from, and let it discover or tell it the engineId of the trap receiver.) (A little more background: http://www.net-snmp.org/tutorial/tutorial-5/commands/snmptrap-v3.html) Bill We are running version 5.7.2.1 Thanks Regards, Jason Pope BATS Trading Limited is a Recognised Investment Exchange regulated by the Financial Conduct Authority. BATS Trading Limited is an indirect wholly-owned subsidiary of BATS Global Markets, Inc. and is a company registered in England and Wales with Company Number 6547680 and registered office at 10 Lower Thames Street, London EC3R 6AF. Confidentiality Notice: This email, including attachments, may include non-public, proprietary, confidential or legally privileged information. If you are not an intended recipient or an authorized agent of an intended recipient, you are hereby notified that any dissemination, distribution or copying of the information contained in or transmitted with this e-mail is unauthorized and strictly prohibited. If you have received this email in error, please notify the sender by replying to this message and permanently delete this e-mail, its attachments, and any copies of it immediately – you should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you. -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ Net-snmp-users mailing list net-snmp-us...@lists.sourceforge.netmailto:net-snmp-us...@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users BATS Trading Limited is a Recognised Investment Exchange regulated by the Financial Conduct Authority. BATS Trading Limited is an indirect wholly-owned subsidiary of BATS Global Markets, Inc. and is a company registered in England and Wales with Company Number 6547680 and registered office at 10 Lower Thames Street, London EC3R 6AF. Confidentiality Notice: This email, including attachments, may include non-public, proprietary, confidential or legally privileged information. If you are not an intended recipient or an authorized agent of an intended recipient, you are hereby notified that any dissemination, distribution or copying of the information contained in or transmitted with this e-mail is unauthorized and strictly prohibited. If you have received this email in error, please notify the sender by replying to this message and permanently delete this e-mail, its attachments, and any copies of it immediately – you should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you. -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho___ Net-snmp-coders mailing list
Re: snmptrapd not processing v3 traps
Jason, Any chance that the switch was actually sending the notifications with noAuthNoPriv? Bill On Oct 6, 2014, at 5:46 AM, Jason Pope jp...@bats.com wrote: Geoff, Basically have a switch sending SNMP traps. It does have an engine ID set. All I have set in my snmptrapd.conf is : createUser myuser SHA foo AES bar authUser log,execute,net myuser And that just works …. Will try it for more than one switch, but so far no issues. Regards, Jason Pope From: Geoff Kingsmill [mailto:gkingsm...@yahoo.com] Sent: 06 October 2014 10:34 To: Jason Pope; 'Bill Fenner' Cc: net-snmp-coders@lists.sourceforge.net; net-snmp-us...@lists.sourceforge.net Subject: RE: snmptrapd not processing v3 traps Jason, Would you mind expanding on this. Would you mind providing a sample on what you put in for authUser and CreateUser to overcome the need of having to enter an engineID for every system. Thanks so much, Geoff.. From: Jason Pope [mailto:jp...@bats.com] Sent: Monday, 6 October 2014 6:47 PM To: Jason Pope; Bill Fenner Cc: net-snmp-coders@lists.sourceforge.net; net-snmp-us...@lists.sourceforge.net Subject: RE: snmptrapd not processing v3 traps Ok … I have got it to work. I forgot to add in the authUser line :-P Also set it up without the engine ID and it works just with the username and auth details. Regards, Jason Pope From: Jason Pope [mailto:jp...@bats.com] Sent: 06 October 2014 10:09 To: Bill Fenner Cc: net-snmp-coders@lists.sourceforge.net; net-snmp-us...@lists.sourceforge.net Subject: RE: snmptrapd not processing v3 traps Bill, I had a look at the doc and no matter what I have done it still does not seem to work. I have tried multiple combinations of engineID with a 0x and not in front. Putting the Id in or not. With our without Auth and Priv …. Still nothing comes though. I can see in the debug the info : dumph_recv: msgAuthoritativeEngineID dumpx_recv: 04 0A F5 71 7F 00 1C 73 01 65 27 00 and I have put this in the config : createUser -e 040AF5717F001C7301652700 myuser SHA foo AES bar as well as putting an 0x in front … and still nothing … Regards, Jason Pope From: Bill Fenner [mailto:fen...@gmail.com] Sent: 03 October 2014 21:16 To: Jason Pope Cc: net-snmp-coders@lists.sourceforge.net; net-snmp-us...@lists.sourceforge.net Subject: Re: snmptrapd not processing v3 traps On Fri, Oct 3, 2014 at 11:06 AM, Jason Pope jp...@bats.com wrote: Hi, Has anyone successfully set up snmptrapd to accept v3 traps from a device ? I have tried to set it up, but I see nothing in the log when the device sends v3 traps. When configured to send v2 traps you can see them in the logs. I have set up the createUser line in the snmptrapd.conf file according to the net-snmp wiki, but still not getting anything. You have to have one createUser per device you're receiving traps from, with the device's engineId specified. (Or switch to informs, in which case you have to create the user on each device you're sending traps from, and let it discover or tell it the engineId of the trap receiver.) (A little more background: http://www.net-snmp.org/tutorial/tutorial-5/commands/snmptrap-v3.html) Bill We are running version 5.7.2.1 Thanks Regards, Jason Pope BATS Trading Limited is a Recognised Investment Exchange regulated by the Financial Conduct Authority. BATS Trading Limited is an indirect wholly-owned subsidiary of BATS Global Markets, Inc. and is a company registered in England and Wales with Company Number 6547680 and registered office at 10 Lower Thames Street, London EC3R 6AF. Confidentiality Notice: This email, including attachments, may include non-public, proprietary, confidential or legally privileged information. If you are not an intended recipient or an authorized agent of an intended recipient, you are hereby notified that any dissemination, distribution or copying of the information contained in or transmitted with this e-mail is unauthorized and strictly prohibited. If you have received this email in error, please notify the sender by replying to this message and permanently delete this e-mail, its attachments, and any copies of it immediately – you should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you. -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk
Re: snmptrapd not processing v3 traps
I have tried in the past and have never been able to get them to work. I have seen them work at my job but the setup was complicated. It is necessary to have necessary to have the correct hand-shake of engine ID and engine ID count along with any keys. I would have to dig up what we did to see about how it worked. I have never seen an answer on this list before so I don't think many people know. On Fri, Oct 3, 2014 at 11:06 AM, Jason Pope jp...@bats.com wrote: Hi, Has anyone successfully set up snmptrapd to accept v3 traps from a device ? I have tried to set it up, but I see nothing in the log when the device sends v3 traps. When configured to send v2 traps you can see them in the logs. I have set up the createUser line in the snmptrapd.conf file according to the net-snmp wiki, but still not getting anything. We are running version 5.7.2.1 Thanks Regards, Jason Pope BATS Trading Limited is a Recognised Investment Exchange regulated by the Financial Conduct Authority. BATS Trading Limited is an indirect wholly-owned subsidiary of BATS Global Markets, Inc. and is a company registered in England and Wales with Company Number 6547680 and registered office at 10 Lower Thames Street, London EC3R 6AF. Confidentiality Notice: This email, including attachments, may include non-public, proprietary, confidential or legally privileged information. If you are not an intended recipient or an authorized agent of an intended recipient, you are hereby notified that any dissemination, distribution or copying of the information contained in or transmitted with this e-mail is unauthorized and strictly prohibited. If you have received this email in error, please notify the sender by replying to this message and permanently delete this e-mail, its attachments, and any copies of it immediately – you should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you. -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ Net-snmp-users mailing list net-snmp-us...@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ Net-snmp-coders mailing list Net-snmp-coders@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
Re: snmptrapd not processing v3 traps
On Fri, Oct 3, 2014 at 11:06 AM, Jason Pope jp...@bats.com wrote: Hi, Has anyone successfully set up snmptrapd to accept v3 traps from a device ? I have tried to set it up, but I see nothing in the log when the device sends v3 traps. When configured to send v2 traps you can see them in the logs. I have set up the createUser line in the snmptrapd.conf file according to the net-snmp wiki, but still not getting anything. You have to have one createUser per device you're receiving traps from, with the device's engineId specified. (Or switch to informs, in which case you have to create the user on each device you're sending traps from, and let it discover or tell it the engineId of the trap receiver.) (A little more background: http://www.net-snmp.org/tutorial/tutorial-5/commands/snmptrap-v3.html) Bill We are running version 5.7.2.1 Thanks Regards, Jason Pope BATS Trading Limited is a Recognised Investment Exchange regulated by the Financial Conduct Authority. BATS Trading Limited is an indirect wholly-owned subsidiary of BATS Global Markets, Inc. and is a company registered in England and Wales with Company Number 6547680 and registered office at 10 Lower Thames Street, London EC3R 6AF. Confidentiality Notice: This email, including attachments, may include non-public, proprietary, confidential or legally privileged information. If you are not an intended recipient or an authorized agent of an intended recipient, you are hereby notified that any dissemination, distribution or copying of the information contained in or transmitted with this e-mail is unauthorized and strictly prohibited. If you have received this email in error, please notify the sender by replying to this message and permanently delete this e-mail, its attachments, and any copies of it immediately – you should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you. -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk ___ Net-snmp-users mailing list net-snmp-us...@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk___ Net-snmp-coders mailing list Net-snmp-coders@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/net-snmp-coders